INNOVX-DTE-MIB
17 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498.22.1.6.1 | NodedteAdmin | |||
| 1.3.6.1.4.1.498.22.1.6.1.1 | ScalardtesMIBversion | read-only | mandatory | Identifies the version of the MIB as `X.YZT' where: X: Major Revision (1-9) Y: Minor Revision (0-9) Z: Typographical Revision (0-9) T: Test Revision (A-Z) Upon… |
| 1.3.6.1.4.1.498.22.1.6.2 | NodedteCfg | |||
| 1.3.6.1.4.1.498.22.1.6.2.1 | ScalardteInterfaceType | read-write | mandatory | Defines the DTE Interface Type. WEBFLAG V.28 V.35 RS-449 EIA-530 EIA-530A X.21 WEBEND |
| 1.3.6.1.4.1.498.22.1.6.2.2 | ScalardteTxInvertingTiming | read-write | mandatory | normal(1) tx timing clocks the transmit data from the DTE using an internal generated clock. invert (2) Invert Internally generated transmit clock used to samp… |
| 1.3.6.1.4.1.498.22.1.6.2.3 | ScalardteRxCarrier | read-write | mandatory | The Receive Carrier option. This option controls the operation of DCD. WEBFLAG Forced On Normal Operation WEBEND |
| 1.3.6.1.4.1.498.22.1.6.2.4 | ScalardteDsrControl | read-write | mandatory | The DSR option. This option controls the operation of DSR. When forcedOn(1) is selected, DSR is normally on, if set for followsDTR(2) then DSR is on only when … |
| 1.3.6.1.4.1.498.22.1.6.3 | NodedteAlarmCfg | |||
| 1.3.6.1.4.1.498.22.1.6.3.1 | ScalardteDtrLossTrapSeverity | read-write | mandatory | Controls the reporting and defines the severity of the Channel Data Terminal Ready Loss Alarm when this event occurs. WEBFLAG Inhibit Critical Major Minor Warn… |
| 1.3.6.1.4.1.498.22.1.6.4 | NodedteDiagnostics | |||
| 1.3.6.1.4.1.498.22.1.6.4.1 | ScalardteLoopback | read-write | mandatory | Control the DTE loopback to the channel. noTest(1) stops the test. toChan(2) starts a loopback toward the DTE. |
| 1.3.6.1.4.1.498.22.1.6.4.2 | ScalardteDiagTestDuration | read-write | mandatory | Defines the length of the diagnostic test. |
| 1.3.6.1.4.1.498.22.1.6.4.3 | ScalardteDiagTestStatus | read-only | mandatory | Displays the test in progress, if any. |
| 1.3.6.1.4.1.498.22.1.6.5 | NodedteStatus | |||
| 1.3.6.1.4.1.498.22.1.6.5.1 | ScalardteLedStatus | read-only | mandatory | A bitwise snapshot of the front panel LED states, where 0 = LED off and 1 = LED on, as follows: LED description Octet 1 bit 7 - n/u bit 6 - n/u bit 5 - n/u bit… |
| 1.3.6.1.4.1.498.22.1.6.5.2 | ScalardtePortStatus | read-only | mandatory | A bitwise snapshot of interface port status conditions and EIA signals, where 0 = condition not present, and 1 = condition present, as follows: Octet 1 - DTE I… |
| 1.3.6.1.4.1.498.22.1.6.5.3 | ScalardtePortFrameCounts | read-only | mandatory | The total number of frames transmitted and received on each interface port. This object will be reset to zero after a read, and after power up, soft reset, or … |