INTEL-DIAG-MIB
35 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.343.6.4 | Nodediag | |||
| 1.3.6.1.4.1.343.6.4.1 | NodediagList | |||
| 1.3.6.1.4.1.343.6.4.1.1 | ScalardiagListNumberOfEntries | read-write | mandatory | Number of entries in Diagnostics Table (Set value to 0 to delete all entries) |
| 1.3.6.1.4.1.343.6.4.1.2 | ScalardiagListNumberOfErrorEntries | read-only | mandatory | Number of errors in Diagnostics Table |
| 1.3.6.1.4.1.343.6.4.1.3 | ScalardiagListLastUpdateTime | read-only | mandatory | Time of last insertion in Diagnostics Table in timeticks since boot (reinserting an existing entry is not considered an update). |
| 1.3.6.1.4.1.343.6.4.1.4 | TablediagListTable | not-accessible | mandatory | Diagnostics Table |
| 1.3.6.1.4.1.343.6.4.1.4.1 | RowdiagListEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.343.6.4.1.4.1.1 | ColumndiagListIndex | read-only | mandatory | Position in table. |
| 1.3.6.1.4.1.343.6.4.1.4.1.2 | ColumndiagListLevel | read-only | mandatory | Error level. |
| 1.3.6.1.4.1.343.6.4.1.4.1.3 | ColumndiagListCode | read-only | mandatory | Number that uniquely identifies a specific situation. Set code to zero to delete the entry. |
| 1.3.6.1.4.1.343.6.4.1.4.1.4 | ColumndiagListIfindex | read-only | mandatory | Interface index. |
| 1.3.6.1.4.1.343.6.4.1.4.1.5 | ColumndiagListTimeStamp | read-only | mandatory | Time of (re)insertion in timeticks since boot. |
| 1.3.6.1.4.1.343.6.4.1.4.1.6 | ColumndiagListDescription | read-only | mandatory | Description of the problem. |
| 1.3.6.1.4.1.343.6.4.1.4.1.7 | ColumndiagListAdvice | read-only | mandatory | Advice |
| 1.3.6.1.4.1.343.6.4.1.4.1.8 | ColumndiagListAutoFixAvailable | read-only | mandatory | no: This entry cannot be automatically fixed. yes: This entry can be automatically fixed. |
| 1.3.6.1.4.1.343.6.4.1.4.1.9 | ColumndiagListAutoFixState | read-write | mandatory | When reading 0: State = idle(1), autoFixInProgress(3) When writing 0: State = startAutoFix(2) 1: Action 2-5: diagListCode (bigendian) 6-9: diagListIfindex (big… |
| 1.3.6.1.4.1.343.6.4.2 | NodediagTest | |||
| 1.3.6.1.4.1.343.6.4.2.1 | TablediagTestTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.343.6.4.2.1.1 | RowdiagTestEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.343.6.4.2.1.1.1 | ColumndiagTestType | read-only | mandatory | Test type |
| 1.3.6.1.4.1.343.6.4.2.1.1.2 | ColumndiagTestDescription | read-only | mandatory | Test description |
| 1.3.6.1.4.1.343.6.4.2.1.1.3 | ColumndiagTestStatus | read-write | mandatory | Test status. Begin a test by setting the value to test(2) and then wait for it to go from testing(3) to ready(1). |
| 1.3.6.1.4.1.343.6.4.3 | NodediagAutodetect | |||
| 1.3.6.1.4.1.343.6.4.3.1 | TablediagAutodetectTable | not-accessible | mandatory | Autodetection table |
| 1.3.6.1.4.1.343.6.4.3.1.1 | RowdiagAutodetectEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.343.6.4.3.1.1.1 | ColumndiagAutodetectType | read-only | mandatory | A number that identifies the group of parameters being autodetected. Res2 is the concatenation of Res2a and Res2b. Possible value are 1: IPX net numbers and fr… |
| 1.3.6.1.4.1.343.6.4.3.1.1.2 | ColumndiagAutodetectIndex1 | read-only | mandatory | First index for autodetect situation (typically interface index). |
| 1.3.6.1.4.1.343.6.4.3.1.1.3 | ColumndiagAutodetectIndex2 | read-only | mandatory | Second index for autodetect situation. |
| 1.3.6.1.4.1.343.6.4.3.1.1.4 | ColumndiagAutodetectIndex3 | read-only | mandatory | Third index for autodetect situation. |
| 1.3.6.1.4.1.343.6.4.3.1.1.5 | ColumndiagAutodetectState | read-write | mandatory | Autodetect state ready(1): Test has not been perfomed. startTest(2): Start test stopTest(3): Stop test (only supported for some types) testSucceeded(4): Test s… |
| 1.3.6.1.4.1.343.6.4.3.1.1.6 | ColumndiagAutodetectDuration | read-only | mandatory | Average duration for autodetection (s). 0 means unknown. |
| 1.3.6.1.4.1.343.6.4.3.1.1.7 | ColumndiagAutodetectRes1 | read-only | mandatory | Result of autodetection. Res1 contains valid information if the value of diagAutodetectState is testSucceeded(3). |
| 1.3.6.1.4.1.343.6.4.3.1.1.8 | ColumndiagAutodetectRes2a | read-only | mandatory | Result of autodetection. Res2 contains valid information if the value of diagAutodetectState is testSucceeded(3). |
| 1.3.6.1.4.1.343.6.4.3.1.1.9 | ColumndiagAutodetectRes2b | read-only | mandatory | If the result takes up more than 255 bytes of information the rest is put in this Res2b. |
| 1.3.6.1.4.1.343.6.4.3.1.1.10 | ColumndiagAutodetectPreInput | read-write | mandatory | Input for test which is set immediately before settting diagAutodetectState to startTest(1). |