INTEL-ES400-MIB
208 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.343 | Nodeintel | |||
| 1.3.6.1.4.1.343.6 | Nodemib2ext | |||
| 1.3.6.1.4.1.343.6.17 | Nodees400 | |||
| 1.3.6.1.4.1.343.6.17.1 | Nodees400Agent | |||
| 1.3.6.1.4.1.343.6.17.1 | NodeportPartition | The trap is sent whenever the port state enter the Partion mode when more than 61 collisions occur while trasmitting. | ||
| 1.3.6.1.4.1.343.6.17.1.1 | Nodees400AgentInfo | |||
| 1.3.6.1.4.1.343.6.17.1.1.1 | Scalares400AgentRuntimeSwVersion | read-only | mandatory | This is a textual description of the runtime software version and revision. If the version number is one and revision number is zero es400AgentRuntimeSwVersion… |
| 1.3.6.1.4.1.343.6.17.1.1.2 | Scalares400AgentPromFwVersion | read-only | mandatory | This is a textual description of the agent PROM firmware version and revision. If the version number is one and revision number is zero es400AgentPromFwVersion… |
| 1.3.6.1.4.1.343.6.17.1.1.3 | Scalares400AgentHwRevision | read-only | mandatory | This is a integer number of the hardware revision. |
| 1.3.6.1.4.1.343.6.17.1.1.4 | Scalares400AgentMgmtProtocolCapability | read-only | mandatory | The network management protocol(s) supported by this agent. |
| 1.3.6.1.4.1.343.6.17.1.1.5 | Tablees400AgentMibSupportTable | not-accessible | mandatory | A list of MIB capability entries supported by this agent. |
| 1.3.6.1.4.1.343.6.17.1.1.5.1 | Rowes400AgentMibSupportEntry | not-accessible | mandatory | A MIB capability entry contains objects describing a particular MIB supported by this agent. |
| 1.3.6.1.4.1.343.6.17.1.1.5.1.1 | Columnes400AgentMibSupportIndex | read-only | mandatory | A list of es400AgentMibSupportDescr entries. |
| 1.3.6.1.4.1.343.6.17.1.1.5.1.2 | Columnes400AgentMibSupportDescr | read-only | mandatory | The name of the MIB supported by the agent. |
| 1.3.6.1.4.1.343.6.17.1.1.5.1.3 | Columnes400AgentMibSupportVersion | read-only | mandatory | The version of the MIB specified in this entry. |
| 1.3.6.1.4.1.343.6.17.1.1.5.1.4 | Columnes400AgentMibSupportType | read-only | mandatory | The type of the MIB specified in this entry. |
| 1.3.6.1.4.1.343.6.17.1.2 | Nodees400AgentConfig | |||
| 1.3.6.1.4.1.343.6.17.1.2.1 | Scalares400AgentSwUpdateMode | read-write | mandatory | The download media used by the system to download the runtime software. |
| 1.3.6.1.4.1.343.6.17.1.2.2 | Scalares400AgentSwUpdateCtrl | read-write | mandatory | Current status of configuration software download control. The setting is effective the next time you reset or power on the hub. |
| 1.3.6.1.4.1.343.6.17.1.2.3 | Scalares400AgentBootFile | read-write | mandatory | The name of the configuration file to be downloaded from the TFTP server when software update is enabled. |
| 1.3.6.1.4.1.343.6.17.1.2.4 | Scalares400AgentFirmwareUpdateCtrl | read-write | mandatory | Current status of firmware software download control. The setting is effective the next time you reset or power on the hub. |
| 1.3.6.1.4.1.343.6.17.1.2.5 | Scalares400AgentFirmwareFile | read-write | mandatory | The name of the firmware file to be downloaded from the TFTP server when software update is enabled. |
| 1.3.6.1.4.1.343.6.17.1.2.6 | Scalares400AgentSystemReset | read-write | mandatory | This object indicates the agent system reset state. Setting this object to no-reset(4) has no effect. Setting this object to cold-start(2) or warm-start(3) wil… |
| 1.3.6.1.4.1.343.6.17.1.2.7 | Scalares400AgentRs232PortConfig | read-write | mandatory | This object indicates the RS-232C mode while device restart. |
| 1.3.6.1.4.1.343.6.17.1.2.8 | Scalares400AgentOutOfBandBaudRateConfig | read-write | mandatory | This object indicates the out_of_band baud rate while device restart. |
| 1.3.6.1.4.1.343.6.17.1.3 | Nodees400AgentIpConfig | |||
| 1.3.6.1.4.1.343.6.17.1.3.1 | Scalares400AgentIpNumOfIf | read-only | mandatory | The total number of IP interfaces supported by this agent. |
| 1.3.6.1.4.1.343.6.17.1.3.2 | Tablees400AgentIpIfTable | not-accessible | mandatory | A list of IP interface entries supported by the agent. |
| 1.3.6.1.4.1.343.6.17.1.3.2.1 | Rowes400AgentIpIfEntry | not-accessible | mandatory | An es400AgentIPIfEntry contains information about a particular IP interface. |
| 1.3.6.1.4.1.343.6.17.1.3.2.1.1 | Columnes400AgentIpIfIndex | read-only | mandatory | This object uniquely identifies the IP interface number in the es400AgentIpIfTable. This value should never greater than es400AgentIpNumOfIf |
| 1.3.6.1.4.1.343.6.17.1.3.2.1.2 | Columnes400AgentIpIfAddress | read-write | mandatory | The IP address of the interface. |
| 1.3.6.1.4.1.343.6.17.1.3.2.1.3 | Columnes400AgentIpIfNetMask | read-write | mandatory | The IP net mask for this interface. |
| 1.3.6.1.4.1.343.6.17.1.3.2.1.4 | Columnes400AgentIpIfDefaultRouter | read-write | mandatory | The default gateway for this IP interface. |
| 1.3.6.1.4.1.343.6.17.1.3.2.1.5 | Columnes400AgentIpIfMacAddr | read-only | mandatory | The MAC address of this IP interface. For interfaces which do not have such an address. (e.g., a serial line), this object should contain an octet string of ze… |
| 1.3.6.1.4.1.343.6.17.1.3.2.1.6 | Columnes400AgentIpIfType | read-only | mandatory | The physical layer interface of the IP interface. |
| 1.3.6.1.4.1.343.6.17.1.3.3 | Scalares400AgentIpBootServerAddr | read-write | mandatory | The IP Address of Boot Server. |
| 1.3.6.1.4.1.343.6.17.1.3.4 | Scalares400AgentIpGetIpFromBootpServer | read-write | mandatory | This object indicates whether the agent get its system IP address from Bootp server at start up. |
| 1.3.6.1.4.1.343.6.17.1.3.5 | Scalares400AgentIpUnauthAddr | read-only | mandatory | The IP address of an unauthorized SNMP packet. |
| 1.3.6.1.4.1.343.6.17.1.3.6 | Scalares400AgentIpUnauthComm | read-only | mandatory | The community string of an unauthorized SNMP packet. |
| 1.3.6.1.4.1.343.6.17.1.3.7 | Scalares400AgentIpLastBootServerAddr | read-only | mandatory | The last IP address used as Boot server IP address. |
| 1.3.6.1.4.1.343.6.17.1.3.8 | Scalares400AgentIpLastIpAddr | read-only | mandatory | The last IP address used as the agent system IP address. |
| 1.3.6.1.4.1.343.6.17.1.4 | Tablees400AgentTrapAddressTable | not-accessible | mandatory | A list of trap manager entries to which to send SNMP traps . |
| 1.3.6.1.4.1.343.6.17.1.4.1 | Rowes400AgentTrapAddressEntry | not-accessible | mandatory | This entry contains the particular trap manager settings. |
| 1.3.6.1.4.1.343.6.17.1.4.1.1 | Columnes400AgentTrapIndex | read-only | mandatory | The table index to receive SNMP traps from this device. |
| 1.3.6.1.4.1.343.6.17.1.4.1.2 | Columnes400AgentTrapAddressIp | read-write | mandatory | The IP address to receive SNMP traps from this device. |
| 1.3.6.1.4.1.343.6.17.1.4.1.3 | Columnes400AgentTrapAddressComm | read-write | mandatory | The community string of the SNMP trap packet sent to the trap manager. |
| 1.3.6.1.4.1.343.6.17.1.4.1.4 | Columnes400AgentTrapAddressStatus | read-write | mandatory | This object indicates whether or not the trap should be send to this trap manager. |
| 1.3.6.1.4.1.343.6.17.2 | Nodees400Chassis | |||
| 1.3.6.1.4.1.343.6.17.2 | NodelinkChangeEvent | The trap is sent whenever the link state of a port changes from link up to link down or from link down to link up | ||
| 1.3.6.1.4.1.343.6.17.2.1 | Nodees400ChassisInfo | |||
| 1.3.6.1.4.1.343.6.17.2.1.1 | Scalares400ChassisInfoSystemUpTime | read-only | mandatory | The value of sysUpTime at the time the switch entered its current operational state. If the current state was entered prior to the last re-initialization, then… |
| 1.3.6.1.4.1.343.6.17.2.1.2 | Scalares400ChassisInfoTotalNumOfPort | read-only | mandatory | The number of ports within this switch. This value is the sum of the ports within this switch. |
| 1.3.6.1.4.1.343.6.17.2.1.3 | Scalares400ChassisInfoNumOfPortInUse | read-only | mandatory | The number of ports in this switch connected to the segment or the end stations. |
| 1.3.6.1.4.1.343.6.17.2.1.4 | Scalares400ChassisInfoConsoleInUse | read-only | mandatory | This usage indication of console system. |
| 1.3.6.1.4.1.343.6.17.2.1.5 | Scalares400ChassisInfoFrontPanelLedStatus | read-only | mandatory | This object is a set of LED indications. The first two octets is defined as system LED. The first LED is power LED. The second LED is status LED. The other oct… |
| 1.3.6.1.4.1.343.6.17.2.1.6 | Scalares400ChassisInfoSaveCfg | read-only | mandatory | This object indicates the status of the device configuration. other(1) - this entry is currently in use but the conditions under which it will remain so are di… |
| 1.3.6.1.4.1.343.6.17.2.2 | Nodees400ChassisConfig | |||
| 1.3.6.1.4.1.343.6.17.2.2.1 | Scalares400ChassisConfigStpState | read-write | mandatory | This object can be enabled or disabled spanning tree algorithm during runtime of the system.When the device is in 802.1Q Vlan mode, this object will be enabled… |
| 1.3.6.1.4.1.343.6.17.2.2.2 | Scalares400ChassisConfigIGMPCaptureState | read-write | mandatory | This object indicates Internet Group Management Protocol (IGMP) capture function is enabled or disabled. |
| 1.3.6.1.4.1.343.6.17.2.2.3 | Scalares400ChassisConfigPartitionModeState | read-write | mandatory | This object used to enable or disable port auto partition. When the object apply for all ports of the device |
| 1.3.6.1.4.1.343.6.17.2.2.4 | Scalares400ChassisConfigTableLockState | read-write | mandatory | This object indicates whether the address table is locked. In other words, the address table doesn't learn any more new address. The aging timer is suspended w… |
| 1.3.6.1.4.1.343.6.17.2.2.5 | Scalares400ChassisConfigSaveCfg | write-only | mandatory | As the object is set, the current device configuration is save into to NV-RAM. |
| 1.3.6.1.4.1.343.6.17.2.2.6 | Scalares400ChassisConfigHOLState | read-write | mandatory | The object provides a way to prevent HOL (Head Of Line) blocking between ports. HOL protection may prevent forwarding a packet to a blocking port.The idea reli… |
| 1.3.6.1.4.1.343.6.17.2.2.7 | Scalares400ChassisConfigAddrLookupModes | read-write | mandatory | The object provides a way to select the algorithm that optimizes the lookup depending on the network configuration. The setting will be effective after next sy… |
| 1.3.6.1.4.1.343.6.17.2.2.8 | Scalares400ChassisConfigUploadImageFileName | read-write | mandatory | The name of the image file to be uploaded from the device to TFTP server when enabling image upload function (by writing es400ChassisConfigUploadImage). |
| 1.3.6.1.4.1.343.6.17.2.2.9 | Scalares400ChassisConfigUploadImage | write-only | mandatory | Image file upload control. Writing it by any value will immediately invoke image upload function. |
| 1.3.6.1.4.1.343.6.17.2.2.10 | Scalares400ChassisConfigHighPriorityServiceRatio | read-write | mandatory | The object provides a way to select an internal round-robin priority weight between low-priority queue and high-priority queue. The meanings of the values are:… |
| 1.3.6.1.4.1.343.6.17.2.3 | Nodees400ChassisAlarm | |||
| 1.3.6.1.4.1.343.6.17.2.3.1 | Scalares400ChassisAlarmPartition | read-write | mandatory | Depending on this object, the device send a trap or not when any one of the device's ports was partitioned. |
| 1.3.6.1.4.1.343.6.17.2.3.2 | Scalares400ChassisAlarmNewRoot | read-write | mandatory | When the device has become the new root of the Spanning Tree, this object decide whether to send a new root trap. |
| 1.3.6.1.4.1.343.6.17.2.3.3 | Scalares400ChassisAlarmTopologyChange | read-write | mandatory | This object determine to send a trap or not when the switch topology was changed. If the object is enabled(3), the topologyChange trap is sent by the device wh… |
| 1.3.6.1.4.1.343.6.17.2.3.4 | Scalares400ChassisAlarmLinkChange | read-write | mandatory | This object determine to send a trap or not when the link was changed. If the object is enabled(3), the Link Change trap is sent by the device when any of its … |
| 1.3.6.1.4.1.343.6.17.3 | NodebroadcastRisingStorm | The trap indicates that broadcast higher rising threshold . This trap including the port ID | ||
| 1.3.6.1.4.1.343.6.17.3 | Nodees400Port | |||
| 1.3.6.1.4.1.343.6.17.3.1 | Tablees400PortInfoTable | not-accessible | mandatory | A table that contains information about every port. |
| 1.3.6.1.4.1.343.6.17.3.1.1 | Rowes400PortInfoEntry | not-accessible | mandatory | A list of information for each port of the device. |
| 1.3.6.1.4.1.343.6.17.3.1.1.1 | Columnes400PortInfoIndex | read-only | mandatory | This object indicates switch port number.(1..Max port number) |
| 1.3.6.1.4.1.343.6.17.3.1.1.2 | Columnes400PortInfoType | read-only | mandatory | This object indicates the connector type of this port. |
| 1.3.6.1.4.1.343.6.17.3.1.1.3 | Columnes400PortInfoLinkStatus | read-only | mandatory | This object indicates the port link status. |
| 1.3.6.1.4.1.343.6.17.3.1.1.4 | Columnes400PortInfoNwayStatus | read-only | mandatory | This object indicates the port speed and duplex mode. |
| 1.3.6.1.4.1.343.6.17.3.1.1.5 | Columnes400PortInfoFlowCtrlStatus | read-only | mandatory | This object indicates the port flow control status. |
| 1.3.6.1.4.1.343.6.17.3.2 | Tablees400PortConfigTable | not-accessible | mandatory | A table that contains control information about every port. |
| 1.3.6.1.4.1.343.6.17.3.2.1 | Rowes400PortConfigEntry | not-accessible | mandatory | A list of control information for each port of the device. |
| 1.3.6.1.4.1.343.6.17.3.2.1.1 | Columnes400PortConfigIndex | read-only | mandatory | This object indicates the device port number.(1..Max port number) |
| 1.3.6.1.4.1.343.6.17.3.2.1.2 | Columnes400PortConfigAdminState | read-write | mandatory | This object decide the port enabled or disabled. |
| 1.3.6.1.4.1.343.6.17.3.2.1.3 | Columnes400PortConfigLinkStatusAlarmState | read-write | mandatory | Depending on this object to determine to send a trap or not when link status changes . |
| 1.3.6.1.4.1.343.6.17.3.2.1.4 | Columnes400PortConfigNwayState | read-write | mandatory | Chose the port speed, duplex mode, and N-Way function mode. |
| 1.3.6.1.4.1.343.6.17.3.2.1.5 | Columnes400PortConfigFlowCtrlState | read-write | mandatory | Set IEEE 802.3x compliant flow control function as enabled or disabled. And IEEE 802.3x compliant flow control function work only when the port is in full dupl… |
| 1.3.6.1.4.1.343.6.17.3.2.1.6 | Columnes400PortConfigBackPressState | read-write | mandatory | Depending on this object determine to enable or disable the backpressure function when the port is working in half duplex mode. |
| 1.3.6.1.4.1.343.6.17.3.2.1.7 | Columnes400PortConfigLockState | read-write | mandatory | The state of this entry. When the es400ChassisConfigTableLockState object is enabled, the state is not changed. The meanings of the values are: other(1) - this… |
| 1.3.6.1.4.1.343.6.17.3.2.1.8 | Columnes400PortConfigPriority | read-write | mandatory | The priority queueing for packets received on this port, except for BPDU/IGMP packets and packets with unknown unicast destination address. IGMP and BPDU packe… |
| 1.3.6.1.4.1.343.6.17.3.2.1.9 | Columnes400PortConfigStpState | read-write | mandatory | The state of STP(spanning tree algorithm) operation on this port. That's meaning the port whether add in the STP. The value enabled(3) indicates that STP is en… |
| 1.3.6.1.4.1.343.6.17.3.2.1.10 | Columnes400PortConfigHOLState | read-write | mandatory | The object provides a way to prevent HOL (Head Of Line) blocking between ports. HOL protection may prevent forwarding a packet to a blocking port.The idea reli… |
| 1.3.6.1.4.1.343.6.17.3.2.1.11 | Columnes400PortConfigBroadcastStormThr | read-write | mandatory | This object contains the setting of the broadcast storm threshold control on each port. The threshold value is represented by the percentage of the port's tota… |
| 1.3.6.1.4.1.343.6.17.3.2.1.12 | Columnes400PortConfigBroadcastStormCtrl | read-write | mandatory | This object indicates whether to enable the broadcast storm control. Refer to es400PortConfigBroadcastStormThr for details. other(1) - this entry is currently … |
| 1.3.6.1.4.1.343.6.17.3.2.1.13 | Columnes400PortConfigCleanAllStatisticCounter | write-only | mandatory | Setting this object will reset current device's all statistic counters. |
| 1.3.6.1.4.1.343.6.17.3.3 | Tablees400PortStatTable | not-accessible | mandatory | A list of port statistic Counter entries. |
| 1.3.6.1.4.1.343.6.17.3.3.1 | Rowes400PortStatEntry | not-accessible | mandatory | This entry include all the port statistic Counter which support by the device, like Bytes received, Bytes Sent ... |
| 1.3.6.1.4.1.343.6.17.3.3.1.1 | Columnes400PortStatIndex | read-only | mandatory | This object indicates the device port number.(1..Max port number) |
| 1.3.6.1.4.1.343.6.17.3.3.1.2 | Columnes400PortStatByteRx | read-only | mandatory | es400ChassisConfigCounterMode = 2(switched-frames):This counter is incre- mented once for every data octet of good packets(unicast + multi- cast + broadcast) r… |
| 1.3.6.1.4.1.343.6.17.3.3.1.3 | Columnes400PortStatByteTx | read-only | mandatory | This counter is incremented once for every data octet of a trans- mitted good packet. |
| 1.3.6.1.4.1.343.6.17.3.3.1.4 | Columnes400PortStatFrameRx | read-only | mandatory | es400ChassisConfigCounterMode = 2(switched-frames):This counter is incre- mented once for every good packet(unicast + multicast + broadcast ) received. es400Ch… |
| 1.3.6.1.4.1.343.6.17.3.3.1.5 | Columnes400PortStatFrameTx | read-only | mandatory | This counter is incremented once for every transmitted good packet. |
| 1.3.6.1.4.1.343.6.17.3.3.1.6 | Columnes400PortStatTotalBytesRx | read-only | mandatory | This counter is incremented once for every data octet of all received packets. This include data octets of rejected and local packets which are not forwarded t… |
| 1.3.6.1.4.1.343.6.17.3.3.1.7 | Columnes400PortStatTotalFramesRx | read-only | mandatory | This counter is incremented once for every received packets. This include rejected and local packets which are not forwarded to the switching core for transmis… |
| 1.3.6.1.4.1.343.6.17.3.3.1.8 | Columnes400PortStatBroadcastFramesRx | read-only | mandatory | es400ChassisConfigCounterMode = 2(switched-frames):This counter is incre- mented once for every good broadcast packet received. es400ChassisConfigCounterMode =… |
| 1.3.6.1.4.1.343.6.17.3.3.1.9 | Columnes400PortStatMulticastFramesRx | read-only | mandatory | es400ChassisConfigCounterMode = 2(switched-frames):This counter is incre- mented once for every good multicast packet received. es400ChassisConfigCounterMode =… |
| 1.3.6.1.4.1.343.6.17.3.3.1.10 | Columnes400PortStatCRCError | read-only | mandatory | This counter is incremented once for every received packet which meets all the following conditions: 1.Packet data length is between 64 and 1518 bytes inclusiv… |
| 1.3.6.1.4.1.343.6.17.3.3.1.11 | Columnes400PortStatOversizeFrames | read-only | mandatory | The number of good frames with length more than 1518 bytes. |
| 1.3.6.1.4.1.343.6.17.3.3.1.12 | Columnes400PortStatFragments | read-only | mandatory | This counter is incremented once for every received packet which meets all the following conditions: 1.Packet data length is less than 64 bytes or packet witho… |
| 1.3.6.1.4.1.343.6.17.3.3.1.13 | Columnes400PortStatJabber | read-only | mandatory | The number of frames with length more than 1518 bytes and with CRC error or misaligned. |
| 1.3.6.1.4.1.343.6.17.3.3.1.14 | Columnes400PortStatCollision | read-only | mandatory | The number of Collisions |
| 1.3.6.1.4.1.343.6.17.3.3.1.15 | Columnes400PortStatLateCollision | read-only | mandatory | The number of Late Collision(collision occurring later than 576th transmitted bit). |
| 1.3.6.1.4.1.343.6.17.3.3.1.16 | Columnes400PortStatFrames-64-bytes | read-only | mandatory | This counter is incremented once for every received and trans- mitted packet with size of 64 bytes. This counter includes reject- ed received and transmitted p… |
| 1.3.6.1.4.1.343.6.17.3.3.1.17 | Columnes400PortStatFrames-65-127-bytes | read-only | mandatory | This counter is incremented once for every received and trans- mitted packet with size of 65 to 127 bytes. This counter includes rejected received and transmit… |
| 1.3.6.1.4.1.343.6.17.3.3.1.18 | Columnes400PortStatFrames-128-255-bytes | read-only | mandatory | This counter is incremented once for every received and trans- mitted packet with size of 128 to 255 bytes. This counter includes rejected received and transmi… |
| 1.3.6.1.4.1.343.6.17.3.3.1.19 | Columnes400PortStatFrames-256-511-bytes | read-only | mandatory | This counter is incremented once for every received and trans- mitted packet with size of 256 to 511 bytes. This counter includes rejected received and transmi… |
| 1.3.6.1.4.1.343.6.17.3.3.1.20 | Columnes400PortStatFrames-512-1023-bytes | read-only | mandatory | This counter is incremented once for every received and trans- mitted packet with size of 512 to 1023 bytes. This counter includ- es rejected received and tran… |
| 1.3.6.1.4.1.343.6.17.3.3.1.21 | Columnes400PortStatFrames-1024-1536-bytes | read-only | mandatory | This counter is incremented once for every received and trans- mitted packet with size of 1024 to 1536 bytes. This counter includ- es rejected received and tra… |
| 1.3.6.1.4.1.343.6.17.3.3.1.22 | Columnes400PortStatFramesDroppedFrames | read-only | mandatory | This counter is incremented once for every received dropped pack- et. |
| 1.3.6.1.4.1.343.6.17.3.3.1.23 | Columnes400PortStatMulticastFramesTx | read-only | mandatory | The number of multicast frames sent. This counter does not include broadcast packets. |
| 1.3.6.1.4.1.343.6.17.3.3.1.24 | Columnes400PortStatBroadcastFramesTx | read-only | mandatory | The number of broadcast frames sent. |
| 1.3.6.1.4.1.343.6.17.3.3.1.25 | Columnes400PortStatUndersizeFrames | read-only | mandatory | This counter is incremented once for every received packet which meets all the following conditions: 1.Packet data length is less than 64 bytes. 2.Packet has v… |
| 1.3.6.1.4.1.343.6.17.4 | NodebroadcastFallingStorm | The trap indicates that broadcast higher falling threshold . This trap including the port ID | ||
| 1.3.6.1.4.1.343.6.17.4 | Nodees400FDb | |||
| 1.3.6.1.4.1.343.6.17.4.1 | Tablees400FDbStaticTable | not-accessible | mandatory | Like typical legacy bridge devices, FDB table records the mapping of Source MAC Address and its associated source port, and forward incoming packets to its des… |
| 1.3.6.1.4.1.343.6.17.4.1.1 | Rowes400FDbStaticEntry | not-accessible | mandatory | A list of information specifies which ports the frames with specific destination MAC address to go. |
| 1.3.6.1.4.1.343.6.17.4.1.1.1 | Columnes400FdbStaticVid | read-only | mandatory | This object indicates the VLAN-ID. If the es400VlanInfoStatus is port-base mode , the object ranges from 1 to 12. If VLAN is in mac-based mode or disabled, the… |
| 1.3.6.1.4.1.343.6.17.4.1.1.2 | Columnes400FDbStaticAddressIndex | read-only | mandatory | The destination MAC address in a frame to which this entry's forwarding information applies. This object can take the value of an unicast address or the multic… |
| 1.3.6.1.4.1.343.6.17.4.1.1.3 | Columnes400FDbStaticPortMap | read-write | mandatory | The set of ports to which frames received from a specific port and destined for a specific MAC address, are allowed to be forwarded. Each octet within the valu… |
| 1.3.6.1.4.1.343.6.17.4.1.1.4 | Columnes400FDbStaticState | read-write | mandatory | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from e… |
| 1.3.6.1.4.1.343.6.17.4.1.1.5 | Columnes400FDbStaticStatus | read-only | mandatory | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from e… |
| 1.3.6.1.4.1.343.6.17.4.2 | Tablees400FDbFilterTable | not-accessible | mandatory | A table which contains the filtering information of the unicast/multicast entries. This table is used by the transparent switching function in determining how … |
| 1.3.6.1.4.1.343.6.17.4.2.1 | Rowes400FDbFilterEntry | not-accessible | mandatory | A list of information about a specific unicast/multicast MAC address for which the switch has filtering information. |
| 1.3.6.1.4.1.343.6.17.4.2.1.1 | Columnes400FdbFilterVid | read-only | mandatory | This object indicates the VLAN-ID. If the es400VlanInfoStatus is port-base mode , the object ranges from 1 to 12. If VLAN is in mac-based mode or disabled, the… |
| 1.3.6.1.4.1.343.6.17.4.2.1.2 | Columnes400FDbFilterAddressIndex | read-only | mandatory | This object indicates a unicast/multicast MAC address for which the bridge has filtering information. |
| 1.3.6.1.4.1.343.6.17.4.2.1.3 | Columnes400FDbFilterState | read-write | mandatory | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from e… |
| 1.3.6.1.4.1.343.6.17.5 | Nodees400LinkAggr | |||
| 1.3.6.1.4.1.343.6.17.5.1 | Tablees400LinkAggrTable | not-accessible | mandatory | This table specifys which ports group a set of ports(up to 8) into a single logical link. |
| 1.3.6.1.4.1.343.6.17.5.1.1 | Rowes400LinkAggrEntry | not-accessible | mandatory | A list of information specifies which ports group a set of ports(up to 8) into a single logical link. |
| 1.3.6.1.4.1.343.6.17.5.1.1.1 | Columnes400LinkAggrIndex | read-only | mandatory | The index of logical port trunk.The device max support 4 trunk groups. The trunk group number depend on the total number of device ports and the existence of m… |
| 1.3.6.1.4.1.343.6.17.5.1.1.2 | Columnes400LinkAggrName | read-write | mandatory | The name of logical port trunk. |
| 1.3.6.1.4.1.343.6.17.5.1.1.3 | Columnes400LinkAggrMasterPort | read-only | mandatory | The object indicates the master port number of the port trunk entry.The first port of the trunk is implicitly configured to be the master logical port.When usi… |
| 1.3.6.1.4.1.343.6.17.5.1.1.4 | Columnes400LinkAggrMemberNum | read-write | mandatory | Indicate how many number of ports is included in this Trunk. If the trunk is located at expansion module (i.e. es400LinkAggrIndex equals to 4(24 ports) or 3(16… |
| 1.3.6.1.4.1.343.6.17.5.1.1.5 | Columnes400LinkAggrState | read-write | mandatory | This object decide the port trunk enabled or disabled. |
| 1.3.6.1.4.1.343.6.17.6 | Nodees400PortMirror | |||
| 1.3.6.1.4.1.343.6.17.6.1 | Tablees400PortMirrorCtrlTable | not-accessible | mandatory | A list of port snooping entries.Port snooping function provide an easy way to monitor traffic on any port. In this way any good packets appears on the source m… |
| 1.3.6.1.4.1.343.6.17.6.1.1 | Rowes400PortMirrorCtrlEntry | not-accessible | mandatory | A list of information provide an easy way to monitor traffic on any port. The use can bring a fancy network monitor attaching to any target mirror port and set… |
| 1.3.6.1.4.1.343.6.17.6.1.1.1 | Columnes400PortMirrorCtrlIndex | read-only | mandatory | This object indicates the port snooping entry number.There is just only one now. |
| 1.3.6.1.4.1.343.6.17.6.1.1.2 | Columnes400PortMirrorCtrlSourcePort | read-write | mandatory | This object indicates switch which port will be mirrored. |
| 1.3.6.1.4.1.343.6.17.6.1.1.3 | Columnes400PortMirrorCtrlTargetPort | read-write | mandatory | This object indicates switch which port will sniff another port. A aggregate port member cannot be configured as a target mirroring port. |
| 1.3.6.1.4.1.343.6.17.6.1.1.4 | Columnes400PortMirrorCtrlState | read-write | mandatory | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from e… |
| 1.3.6.1.4.1.343.6.17.7 | Nodees400IgmpSnoop | |||
| 1.3.6.1.4.1.343.6.17.7.1 | Tablees400IgmpSnoopConfigTable | not-accessible | mandatory | The table controls the Vlan's IGMP function. Its scale depends on current VLAN state (es400VlanInfoStatus). If VLAN is disabled or in Mac-Base mode, there is o… |
| 1.3.6.1.4.1.343.6.17.7.1.1 | Rowes400IgmpSnoopConfigEntry | not-accessible | mandatory | The entry in IGMP control table (es400IgmpSnoopConfigTable). The entry is effective only when IGMP capture switch (es400Chassis- ConfigIGMPCaptureState) is ena… |
| 1.3.6.1.4.1.343.6.17.7.1.1.1 | Columnes400IgmpSnoopConfigIndex | read-only | mandatory | This object indicates the IGMP control entry number.Its scale depends on current VLAN state (es400VlanInfoStatus). If VLAN is disabled or in Mac-Base mode, the… |
| 1.3.6.1.4.1.343.6.17.7.1.1.2 | Columnes400IgmpSnoopConfigVid | read-write | mandatory | This object indicates the IGMP control entry's VLAN id. If VLAN is disabled or in Mac-Base mode, the Vid is always 0 and cannot be changed by management users.… |
| 1.3.6.1.4.1.343.6.17.7.1.1.3 | Columnes400IgmpSnoopConfigTimer | read-write | mandatory | The timer value for sending IGMP query packet when none was sent by the multicast router in the LAN. The timer works in per-VLAN basis. Our device will be acti… |
| 1.3.6.1.4.1.343.6.17.7.1.1.4 | Columnes400IgmpSnoopConfigState | read-write | mandatory | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from e… |
| 1.3.6.1.4.1.343.6.17.7.2 | Tablees400IgmpSnoopInfoTable | not-accessible | mandatory | The table contains the number current IGMP query packets which is captured by this device, as well as the IGMP query packets sent by the device. |
| 1.3.6.1.4.1.343.6.17.7.2.1 | Rowes400IgmpSnoopInfoEntry | not-accessible | mandatory | Information about current IGMP query information, provided that es400ChassisConfigIGMPCaptureState and es400IgmpSnoopConfigState of associated VLAN entry are a… |
| 1.3.6.1.4.1.343.6.17.7.2.1.1 | Columnes400IgmpSnoopInfoIndex | read-only | mandatory | This object indicates the IGMP query information entry number. It could be up to 12 entries, depending on current number of VLAN entries. |
| 1.3.6.1.4.1.343.6.17.7.2.1.2 | Columnes400IgmpSnoopInfoVid | read-only | mandatory | This object indicates the Vid of associated IGMP info table entry. It follows es400IgmpSnoopConfigVid in the associated entry of IGMP control table (es400IgmpS… |
| 1.3.6.1.4.1.343.6.17.7.2.1.3 | Columnes400IgmpSnoopInfoQueryCount | read-only | mandatory | This object indicates the number of query packets received since the IGMP function enabled, in per-VLAN basis. |
| 1.3.6.1.4.1.343.6.17.7.2.1.4 | Columnes400IgmpSnoopInfoTxQueryCount | read-only | mandatory | This object indicates the send count of IGMP query messages, in per-VLAN basis. In case of IGMP timer expiration, the switch sends IGMP query packets to relate… |
| 1.3.6.1.4.1.343.6.17.7.3 | Tablees400IgmpSnoopTable | not-accessible | mandatory | The table containing current IGMP information which captured by this device, provided that es400ChassisConfigIGMPCaptureState and es400IgmpSnoopConfigState of … |
| 1.3.6.1.4.1.343.6.17.7.3.1 | Rowes400IgmpSnoopEntry | not-accessible | mandatory | Information about current IGMP information which captured by this device , provided that es400ChassisConfigIGMPCaptureState and es400IgmpSnoopConfigState of as… |
| 1.3.6.1.4.1.343.6.17.7.3.1.1 | Columnes400IgmpSnoopVid | read-only | mandatory | This object indicates the Vid of individual IGMP table entry. It shows the Vid of IGMP report information captured on network. |
| 1.3.6.1.4.1.343.6.17.7.3.1.2 | Columnes400IgmpSnoopGroupIpAddr | read-only | mandatory | This object is identify group ip address which is captured from IGMP packet, in per-Vlan basis. |
| 1.3.6.1.4.1.343.6.17.7.3.1.3 | Columnes400IgmpSnoopMacAddr | read-only | mandatory | This object is identify mac address which is corresponding to es400IgmpSnoopGroupIpAddr, in per-Vlan basis.. |
| 1.3.6.1.4.1.343.6.17.7.3.1.4 | Columnes400IgmpSnoopPortMap | read-only | mandatory | This object indicates which ports are belong to the same multicast group, in per-Vlan basis. Each multicast group has a octect string to indicate with port map… |
| 1.3.6.1.4.1.343.6.17.7.3.1.5 | Columnes400IgmpSnoopReportCount | read-only | mandatory | This object indicate how much report packet was receive by our device corresponding with this entry from IGMP function enabled, in per-Vlan basis. |
| 1.3.6.1.4.1.343.6.17.8 | Nodees400Vlan | |||
| 1.3.6.1.4.1.343.6.17.8.1 | Scalares400VlanConfigMode | read-write | mandatory | This object control which Vlan function will be enable (or disable) when the switch hub restart at the startup (power on) or warm start. |
| 1.3.6.1.4.1.343.6.17.8.2 | Scalares400VlanInfoStatus | read-only | mandatory | This object indicate which Vlan function be enable (or disable) in mandatoryly stage. There are no effect when change es400VlanConfigMode vlaue in the system r… |
| 1.3.6.1.4.1.343.6.17.8.3 | Scalares400VlanSnmpPortInfo | read-write | mandatory | This object controls which Vlan is binded with system snmp port. Its scale depends on current VLAN state (es400VlanInfoStatus). If VLAN is disabled or in Mac-B… |
| 1.3.6.1.4.1.343.6.17.8.4 | Nodees400MacVlan | |||
| 1.3.6.1.4.1.343.6.17.8.4.1 | Scalares400MacVlanTotalNum | read-only | mandatory | The total number of Mac base Vlan within this switch hub. |
| 1.3.6.1.4.1.343.6.17.8.4.2 | Tablees400MacVlanConfigTable | not-accessible | mandatory | A table that contains MAC-Based VLAN list entries for the switch. Management users can create a MAC-Based VLAN entry by adding a new list (es400MacVlanConfigEn… |
| 1.3.6.1.4.1.343.6.17.8.4.2.1 | Rowes400MacVlanConfigEntry | not-accessible | mandatory | A list of information about a specific MAC-Based VLAN configuration in es400MacVlanConfigTable. |
| 1.3.6.1.4.1.343.6.17.8.4.2.1.1 | Columnes400MacVlanDesc | read-only | mandatory | A textual description of the Mac Base Vlan. |
| 1.3.6.1.4.1.343.6.17.8.4.2.1.2 | Columnes400MacVlanMacMemberNum | read-only | mandatory | This object indicates the total number of MAC addresses contained in the VLAN entry. |
| 1.3.6.1.4.1.343.6.17.8.4.2.1.3 | Columnes400MacVlanCtrlState | read-write | mandatory | This object indicates the MacBase Vlan state. Writing disabled value to the object will remove the corresponding entry from the table. |
| 1.3.6.1.4.1.343.6.17.8.4.3 | Scalares400MacVlanAddrTotalNum | read-only | mandatory | The total number of Mac base Vlan address entry within this switch hub. |
| 1.3.6.1.4.1.343.6.17.8.4.4 | Tablees400MacVlanAddrTable | not-accessible | mandatory | A table that contains information about unicast entries for which the switch has forwarding and/or filtering information. This information is used by the trans… |
| 1.3.6.1.4.1.343.6.17.8.4.4.1 | Rowes400MacVlanAddrEntry | not-accessible | mandatory | A list of information about a specific unicast MAC address for which the switch has some forwarding and/or filtering information. |
| 1.3.6.1.4.1.343.6.17.8.4.4.1.1 | Columnes400MacVlanAddress | read-only | mandatory | This object indictaes a unicast MAC address for which the bridge has forwarding and/or filtering information. |
| 1.3.6.1.4.1.343.6.17.8.4.4.1.2 | Columnes400MacVlanAddrDesc | read-write | mandatory | This object references to the MAC-Base VLAN description (es400MacVlanDesc) which the MAC address belong to. You must update the VLAN description with an VLAN d… |
| 1.3.6.1.4.1.343.6.17.8.4.4.1.3 | Columnes400MacVlanAddrState | read-write | mandatory | This object indicates the MacBase Vlan Address entry state. other(1) - this entry is currently in use but the conditions under which it will remain so are diff… |
| 1.3.6.1.4.1.343.6.17.8.4.4.1.4 | Columnes400MacVlanAddrStatus | read-only | mandatory | This object indicates the MacBase Vlan Address entry state. other(1) - this entry is currently in use but the conditions under which it will remain so are diff… |
| 1.3.6.1.4.1.343.6.17.8.5 | Nodees400PortVlan | |||
| 1.3.6.1.4.1.343.6.17.8.5.1 | Scalares400PortVlanTotalNum | read-only | mandatory | The total number of Port-Base Vlan which is in enabled state within this switch hub. |
| 1.3.6.1.4.1.343.6.17.8.5.2 | Tablees400PortVlanDefaultVlanTable | not-accessible | mandatory | A table that contains default Port-Based VLAN list entries for the switch. The entry (Vid = 1,i.e. es400PortVlanDefaultPvid = 1) is defalut Port-Based VLAN , m… |
| 1.3.6.1.4.1.343.6.17.8.5.2.1 | Rowes400PortVlanDefaultVlanEntry | not-accessible | mandatory | A list of default Port-Based VLAN information in es400PortVlanDefaultVlanTable. |
| 1.3.6.1.4.1.343.6.17.8.5.2.1.1 | Columnes400PortVlanDefaultPvid | read-only | mandatory | This object indicates the default Port-Base Vlan ID. It occupies only 1 entry in VLAN table, with VID=1. |
| 1.3.6.1.4.1.343.6.17.8.5.2.1.2 | Columnes400PortVlanDefaultDesc | read-only | mandatory | A textual description of the Port-Base Vlan. |
| 1.3.6.1.4.1.343.6.17.8.5.2.1.3 | Columnes400PortVlanDefaultPortList | read-only | mandatory | This object indicates the port member set of the specified Vlan. Each Vlan has a octect string to indicate the port map. The most significant bit represents th… |
| 1.3.6.1.4.1.343.6.17.8.5.2.1.4 | Columnes400PortVlanDefaultPortNumber | read-only | mandatory | This object indicates the number of ports of the entry. |
| 1.3.6.1.4.1.343.6.17.8.5.3 | Tablees400PortVlanConfigTable | not-accessible | mandatory | A table that contains Port-Based VLAN list entries for the switch. The device can't support port overlapping in Port-Based VLAN. |
| 1.3.6.1.4.1.343.6.17.8.5.3.1 | Rowes400PortVlanConfigEntry | not-accessible | mandatory | A list of information about a specific Port-Based VLAN configuration in es400PortVlanConfigTable. |
| 1.3.6.1.4.1.343.6.17.8.5.3.1.1 | Columnes400PortVlanConfigPvid | read-only | mandatory | This object indicates the Port-Base Vlan ID. There are up to 11 entries for current product now. The object range varies from 2 to 12. |
| 1.3.6.1.4.1.343.6.17.8.5.3.1.2 | Columnes400PortVlanConfigDesc | read-write | mandatory | A textual description of the Port-Base Vlan. It cannot be a null string. And each description must be unique in the table. |
| 1.3.6.1.4.1.343.6.17.8.5.3.1.3 | Columnes400PortVlanConfigPortList | read-write | mandatory | This object indicates which ports are belong to the Vlan. Each Vlan has a octect string to indicate with port map. The most significant bit represents the lowe… |
| 1.3.6.1.4.1.343.6.17.8.5.3.1.4 | Columnes400PortVlanConfigPortNumber | read-only | mandatory | This object indicates the number of ports of the entry. |
| 1.3.6.1.4.1.343.6.17.8.5.3.1.5 | Columnes400PortVlanConfigState | read-write | mandatory | This object indicates the Port-Base Vlan state. other(1) - this entry is currently in use but the conditions under which it will remain so are different from e… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MacAddress | OCTET STRING(SIZE(6)) | ||
| PortList | OCTET STRING(SIZE(4)) | ||
| VlanIndex | INTEGER |