INTEL-ES480-SYSTEM-MIB
25 objects
Intel es480t system objects.
Imported Objects
| INTEL-ES480-MIB | es480tAgent |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.343.6.60.1 | Identityes480tSystem | Intel es480t system objects. | ||
| 1.3.6.1.4.1.343.6.60.1.3 | Scalares480tSaveConfiguration | read-write | current | When this object is set, the device will copy the contents of the configuration database to a buffer and save it to the persistant store specified by the value… |
| 1.3.6.1.4.1.343.6.60.1.4 | Scalares480tSaveStatus | read-only | current | This object will return the status of a save operation invoked by setting the intelSaveConfiguration object. A network management application can read this obj… |
| 1.3.6.1.4.1.343.6.60.1.5 | Scalares480tCurrentConfigInUse | read-only | current | Shows which NVRAM configuration store was used at last boot |
| 1.3.6.1.4.1.343.6.60.1.6 | Scalares480tConfigToUseOnReboot | read-write | current | Controls which NVRAM configuration store will be used on next reboot. |
| 1.3.6.1.4.1.343.6.60.1.7 | Scalares480tOverTemperatureAlarm | read-only | current | Alarm status of overtemperature sensor in device enclosure. |
| 1.3.6.1.4.1.343.6.60.1.8 | Scalares480tCurrentTemperature | read-only | current | Current temperature in degrees celcius measured inside device enclosure. |
| 1.3.6.1.4.1.343.6.60.1.9 | Tablees480tFanStatusTable | not-accessible | current | Table of operational status of all internal cooling fans. |
| 1.3.6.1.4.1.343.6.60.1.9.1 | Rowes480tFanStatusEntry | not-accessible | current | Entry in table of all internal cooling fans. |
| 1.3.6.1.4.1.343.6.60.1.9.1.1 | Columnes480tFanNumber | read-only | current | Identifier of cooling fan, numbered from the front and/or left side of device. |
| 1.3.6.1.4.1.343.6.60.1.9.1.2 | Columnes480tFanOperational | read-only | current | Operational status of a cooling fan. |
| 1.3.6.1.4.1.343.6.60.1.10 | Scalares480tPrimaryPowerOperational | read-only | current | Operational status of internal power supply of a device. |
| 1.3.6.1.4.1.343.6.60.1.11 | Scalares480tRedundantPowerStatus | read-only | current | Operational status of an external redundant power supply to a device. |
| 1.3.6.1.4.1.343.6.60.1.12 | Scalares480tRedundantPowerAlarm | read-only | current | Alarm state of an external redundant power supply to a device. Alarm state indicates either fan failure or overtemperature condition. |
| 1.3.6.1.4.1.343.6.60.1.13 | Scalares480tPrimarySoftwareRev | read-only | current | The software revision of the primary image stored in this device. This string will have a zero length if the revision is unknown, invalid or not present. This … |
| 1.3.6.1.4.1.343.6.60.1.14 | Scalares480tSecondarySoftwareRev | read-only | current | The software revision of the secondary image stored in this device. This string will have a zero length if the revision is unknown, invalid or not present. Thi… |
| 1.3.6.1.4.1.343.6.60.1.15 | Scalares480tImageToUseOnReboot | read-write | current | Controls which image will be used on next reboot. |
| 1.3.6.1.4.1.343.6.60.1.16 | Scalares480tSystemID | read-only | current | This represents the System ID of the Summit Switch. |
| 1.3.6.1.4.1.343.6.60.1.17 | Scalares480tSystemBoardID | read-only | current | This represents the Board ID of the Summit Switch. |
| 1.3.6.1.4.1.343.6.60.1.18 | Scalares480tSystemLeftBoardID | read-only | current | This represents the Left Board ID of the Summit Switch. |
| 1.3.6.1.4.1.343.6.60.1.19 | Scalares480tSystemRightBoardID | read-only | current | This represents the Right Board ID of the Summit Switch. |
| 1.3.6.1.4.1.343.6.60.1.20 | Scalares480tInputPowerVoltage | read-only | current | The input power voltage at which the system is currently operating. |
| 1.3.6.1.4.1.343.6.60.1.21 | Scalares480tPowerStatus | read-only | current | Operational status of the power supply to a device. |
| 1.3.6.1.4.1.343.6.60.1.22 | Scalares480tPowerAlarm | read-only | current | Alarm state of the power supply to a device. Alarm state indicates either fan failure or overtemperature condition. |
| 1.3.6.1.4.1.343.6.60.1.23 | Scalares480tRmonEnable | read-write | current | Setting this to true will cause the agent to start collecting RMON statistics. |