INTEL-VLAN-MIB
139 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.343.6.11 | Nodevlan | |||
| 1.3.6.1.4.1.343.6.11.1 | NodeglobalVlanConfigurationChange | A new VLAN configuration has been distributed. | ||
| 1.3.6.1.4.1.343.6.11.1 | NodevlanPolicy | |||
| 1.3.6.1.4.1.343.6.11.1.1 | ScalarvlanPolicyDomainName | read-write | mandatory | The VLAN Domain name. All VLAN configuration and connectivity is separated in domains. |
| 1.3.6.1.4.1.343.6.11.1.2 | ScalarvlanPolicyServerSeqNo | read-only | mandatory | The sequence number of the configuration policy of the VLAN sever. |
| 1.3.6.1.4.1.343.6.11.1.3 | ScalarvlanPolicyClientSeqNo | read-only | mandatory | The sequence number of the configuration policy of the client. |
| 1.3.6.1.4.1.343.6.11.1.4 | ScalarvlanPolicyMode | read-write | mandatory | The device is running VLAN in 1 of 2 possible modes. 1) Distributed VLAN - the configuration and VLAN memberships are shared with other devices in the same dom… |
| 1.3.6.1.4.1.343.6.11.1.5 | ScalarvlanPolicyChangedStamp | read-only | mandatory | Local timestamp of last policy configuration change |
| 1.3.6.1.4.1.343.6.11.1.6 | ScalarvlanPolicyNextVlanId | read-only | mandatory | Returns the next VLAN id to be used when creating a new VLAN |
| 1.3.6.1.4.1.343.6.11.1.7 | ScalarvlanPolicyLastApiError | read-only | mandatory | Return code for the last occurred error when making changes to the VLAN database |
| 1.3.6.1.4.1.343.6.11.1.8 | ScalarvlanPolicyChangeOperation | read-write | mandatory | This object must be set when changing the name of a VLAN DOMAIN, to indicate whether the change is a rename- or a create-operation |
| 1.3.6.1.4.1.343.6.11.1.9 | TablevlanPolicyVlanTable | not-accessible | mandatory | Table of configured VLANs |
| 1.3.6.1.4.1.343.6.11.1.9.1 | RowpolicyVlanEntry | not-accessible | mandatory | Entry in VLAN table consists of id and name and contains two special binary objects for creating and deleting VLANs |
| 1.3.6.1.4.1.343.6.11.1.9.1.1 | ColumnpolicyVlanId | read-only | mandatory | The internal id number of a VLAN. Must be used as index for creating and deleting |
| 1.3.6.1.4.1.343.6.11.1.9.1.2 | ColumnpolicyVlanName | read-write | mandatory | Name of the VLAN (20 bytes ASCII-Z string) |
| 1.3.6.1.4.1.343.6.11.1.9.1.3 | ColumnpolicyVlanCreateObj | read-write | mandatory | This object is used to create a new VLAN. The object takes parameters as binary-coded octet strings. Index (policyVlanId) used must be value from vlanPolicyNex… |
| 1.3.6.1.4.1.343.6.11.1.9.1.4 | ColumnpolicyVlanDeleteObj | read-write | mandatory | This object is used to delete an existing VLAN. The id of the VLAN must be used as index |
| 1.3.6.1.4.1.343.6.11.1.10 | TablevlanPolicyMacRuleTable | not-accessible | mandatory | Table of configured MAC rules in a VLAN |
| 1.3.6.1.4.1.343.6.11.1.10.1 | RowpolicyMacRuleEntry | not-accessible | mandatory | Entry in MAC rule table consist of VLAN id and MAC address and contains two special binary objects for creating and deleting rules |
| 1.3.6.1.4.1.343.6.11.1.10.1.1 | ColumnpolicyMacRuleVlanId | read-only | mandatory | Id of VLAN. Used as index when creating and deleting a rule |
| 1.3.6.1.4.1.343.6.11.1.10.1.2 | ColumnpolicyMacRuleAddress | read-only | mandatory | MAC address string rule (6 bytes) for VLAN learning |
| 1.3.6.1.4.1.343.6.11.1.10.1.3 | ColumnpolicyMacRuleCreateObj | read-write | mandatory | This object is used to create a new MAC rule. The object takes parameters as binary-coded octet strings. Index (policyMacRuleVlanId and policyMacRuleAddress) u… |
| 1.3.6.1.4.1.343.6.11.1.10.1.4 | ColumnpolicyMacRuleDeleteObj | read-write | mandatory | This object is used to delete an existing MAC rule. The VLAN id and MAC address of the rule must be used as index |
| 1.3.6.1.4.1.343.6.11.1.11 | TablevlanPolicyIslMacRuleTable | not-accessible | mandatory | THIS TABLE HAS BEEN OBSOLETED! Table of configured IslMAC rules in a VLAN |
| 1.3.6.1.4.1.343.6.11.1.11.1 | RowpolicyIslMacRuleEntry | not-accessible | mandatory | THIS ENTRY HAS BEEN OBSOLETED! Entry in IslMAC rule table consists of VLAN id and IslMAC address and contains two special binary objects for creating and delet… |
| 1.3.6.1.4.1.343.6.11.1.11.1.1 | ColumnpolicyIslMacRuleVlanId | read-only | mandatory | OBJECT HAS BEEN OBSOLETED! Id of VLAN. Used as index when creating and deleting a rule |
| 1.3.6.1.4.1.343.6.11.1.11.1.2 | ColumnpolicyIslMacRuleAddress | read-only | mandatory | OBJECT HAS BEEN OBSOLETED! MAC address string rule (6 bytes) for VLAN learning |
| 1.3.6.1.4.1.343.6.11.1.11.1.3 | ColumnpolicyIslMacRuleCreateObj | read-write | mandatory | OBJECT HAS BEEN OBSOLETED! This object is used to create a new IslMAC rule. The object takes parameters as binary-coded octet strings. Index (policyIslMacRuleV… |
| 1.3.6.1.4.1.343.6.11.1.11.1.4 | ColumnpolicyIslMacRuleDeleteObj | read-write | mandatory | OBJECT HAS BEEN OBSOLETED! This object is used to delete an existing IslMAC rule. The VLAN id and MAC address of the rule must be used as index |
| 1.3.6.1.4.1.343.6.11.1.12 | TablevlanPolicyIpRuleTable | not-accessible | mandatory | Table of configured IP rules in a VLAN |
| 1.3.6.1.4.1.343.6.11.1.12.1 | RowpolicyIpRuleEntry | not-accessible | mandatory | Entry in IP rule table consists of VLAN id and IP address and contains two special binary objects for creating and deleting rules |
| 1.3.6.1.4.1.343.6.11.1.12.1.1 | ColumnpolicyIpRuleVlanId | read-only | mandatory | Id of VLAN. Used as index when creating and deleting a rule |
| 1.3.6.1.4.1.343.6.11.1.12.1.2 | ColumnpolicyIpRuleAddress | read-only | mandatory | IP address string rule (4 bytes) for VLAN learning |
| 1.3.6.1.4.1.343.6.11.1.12.1.3 | ColumnpolicyIpRuleCreateObj | read-write | mandatory | This object is used to create a new IP rule. The object takes parameters as binary-coded octet strings. Index (policyIpRuleVlanId and policyIpRuleAddress) used… |
| 1.3.6.1.4.1.343.6.11.1.12.1.4 | ColumnpolicyIpRuleDeleteObj | read-write | mandatory | This object is used to delete an existing IP rule. The VLAN id and IP address of the rule must be used as index |
| 1.3.6.1.4.1.343.6.11.1.13 | TablevlanPolicyIpNetRuleTable | not-accessible | mandatory | Table of configured IP Network rules in a VLAN |
| 1.3.6.1.4.1.343.6.11.1.13.1 | RowpolicyIpNetRuleEntry | not-accessible | mandatory | Entry in IP Network rule table consists of VLAN id, IP Network address and IP Network mask and contains two special binary objects for creating and deleting ru… |
| 1.3.6.1.4.1.343.6.11.1.13.1.1 | ColumnpolicyIpNetRuleVlanId | read-only | mandatory | Id of VLAN. Used as index when creating and deleting a rule |
| 1.3.6.1.4.1.343.6.11.1.13.1.2 | ColumnpolicyIpNetRuleAddress | read-only | mandatory | IP Network address string rule (4 bytes) for VLAN learning |
| 1.3.6.1.4.1.343.6.11.1.13.1.3 | ColumnpolicyIpNetRuleMask | read-only | mandatory | IP Network subnet mask string (4 bytes). Rule will be the result of a bit-wise AND operation between address and mask |
| 1.3.6.1.4.1.343.6.11.1.13.1.4 | ColumnpolicyIpNetRuleCreateObj | read-write | mandatory | This object is used to create a new IP Network rule. The object takes parameters as binary-coded octet strings. Index (policyIpNetRuleVlanId and policyIpNetRul… |
| 1.3.6.1.4.1.343.6.11.1.13.1.5 | ColumnpolicyIpNetRuleDeleteObj | read-write | mandatory | This object is used to delete an existing IP Network rule. The VLAN id and IP Network address of the rule must be used as index |
| 1.3.6.1.4.1.343.6.11.1.14 | TablevlanPolicyPortRuleTable | not-accessible | mandatory | Table of configured Port rules in a VLAN |
| 1.3.6.1.4.1.343.6.11.1.14.1 | RowpolicyPortRuleEntry | not-accessible | mandatory | Entry in Port rule table consists of VLAN id and Port number and contains two special binary objects for creating and deleting rules |
| 1.3.6.1.4.1.343.6.11.1.14.1.1 | ColumnpolicyPortRuleVlanId | read-only | mandatory | Id of VLAN. Used as index when creating and deleting a rule |
| 1.3.6.1.4.1.343.6.11.1.14.1.2 | ColumnpolicyPortRuleNumber | read-only | mandatory | Port number rule for VLAN learning |
| 1.3.6.1.4.1.343.6.11.1.14.1.3 | ColumnpolicyPortRuleCreateObj | read-write | mandatory | This object is used to create a new Port rule. The object takes parameters as binary-coded octet strings. Index (policyPortRuleVlanId and policyPortRuleAddress… |
| 1.3.6.1.4.1.343.6.11.1.14.1.4 | ColumnpolicyPortRuleDeleteObj | read-write | mandatory | This object is used to delete an existing Port rule. The VLAN id and Port number of the rule must be used as index |
| 1.3.6.1.4.1.343.6.11.1.15 | TablevlanPolicyPortSettingsTable | not-accessible | mandatory | List of ports and their VLAN relevant configuration |
| 1.3.6.1.4.1.343.6.11.1.15.1 | RowpolicyPortSettingsEntry | not-accessible | mandatory | Entry consists of Port Number and state for IP learning on a port |
| 1.3.6.1.4.1.343.6.11.1.15.1.1 | ColumnpolicyPortSettingsPortNumber | read-only | mandatory | This is the Port number. Used as index when changing settings |
| 1.3.6.1.4.1.343.6.11.1.15.1.2 | ColumnpolicyPortSettingsIpLearning | read-write | mandatory | This option enables or disables the IP rule learning on a per port basis. This option should be enabled for ports connected to IP traffic only networks |
| 1.3.6.1.4.1.343.6.11.1.16 | ScalarvlanPolicyAllPortSettingsIpLearning | read-write | mandatory | This object is used to synchronize IP learning settings for all ports (set to either enabled or disabled). When read this object will also indicate if the sett… |
| 1.3.6.1.4.1.343.6.11.1.17 | ScalarvlanPolicyAssignManagementVlan | read-write | mandatory | Assign a VLAN to have access to the switch local management. NB: Only for desktop switches! |
| 1.3.6.1.4.1.343.6.11.1.18 | ScalarvlanPolicyConfigConfState | read-write | mandatory | When a management center changes the VLAN configuration, there is a risk that it looses the access to the switch. Therefore, in case the switch is running VLAN… |
| 1.3.6.1.4.1.343.6.11.1.19 | ScalarvlanPolicyConfigConfTimerValue | read-only | mandatory | This object returns the start value of the Configuration Confirm Timer |
| 1.3.6.1.4.1.343.6.11.1.20 | ScalarvlanPolicySupportedVlanModes | read-only | mandatory | This object returns a bitmask containing the supported VLAN modes: 0x01 : Stand-alone VLAN 0x02 : Distributed VLAN |
| 1.3.6.1.4.1.343.6.11.1.21 | ScalarvlanPolicyRevert2Default | read-write | mandatory | Setting this object to 1 will restore the original VLAN setup (1 System VLAN with all ports in it). NB: vlanMode and name is not effected by this! |
| 1.3.6.1.4.1.343.6.11.1.22 | ScalarvlanPolicyMacVlanServerPriority | read-write | mandatory | This object sets the priority for this device to become MAC-VLAN server |
| 1.3.6.1.4.1.343.6.11.1.23 | ScalarvlanPolicyAutoMoveMgtIpLink | read-write | mandatory | If this object is enabled, the switch will make use of the feature to let Main IP link follow the management VlanId. Otherwise Main IP link will not move with … |
| 1.3.6.1.4.1.343.6.11.1.24 | TablevlanPolicyStackPortRuleTable | not-accessible | mandatory | Table of configured Port rules in a VLAN for a stack |
| 1.3.6.1.4.1.343.6.11.1.24.1 | RowpolicyStackPortRuleEntry | not-accessible | mandatory | Entry in Stack Port rule table consists of VLAN id, Switch MAC and Port number and contains two special binary objects for creating and deleting rules |
| 1.3.6.1.4.1.343.6.11.1.24.1.1 | ColumnpolicyStackPortRuleVlanId | read-only | mandatory | Id of VLAN. Used as index when creating and deleting a rule |
| 1.3.6.1.4.1.343.6.11.1.24.1.2 | ColumnpolicyStackPortRuleSwitchMac | read-only | mandatory | Mac address identifying the switch on which the port is physically located |
| 1.3.6.1.4.1.343.6.11.1.24.1.3 | ColumnpolicyStackPortRuleNumber | read-only | mandatory | Port number rule for VLAN learning |
| 1.3.6.1.4.1.343.6.11.1.24.1.4 | ColumnpolicyStackPortRuleCreateObj | read-write | mandatory | This object is used to create a new Stack Port rule. The object takes parameters as binary-coded octet strings. Index (policyStackPortRuleVlanId, policyStackPo… |
| 1.3.6.1.4.1.343.6.11.1.24.1.5 | ColumnpolicyStackPortRuleDeleteObj | read-write | mandatory | This object is used to delete an existing Port rule. The VLAN id, Switch Mac and Port number of the rule must be used as index |
| 1.3.6.1.4.1.343.6.11.1.25 | ScalarvlanPolicyUseMultiSTP | read-write | mandatory | When enabled, the device will operate multiple spanning trees on top of VLANs. When disabled the device will operate with VLANs on top of a single spanning tre… |
| 1.3.6.1.4.1.343.6.11.1.26 | ScalarvlanPolicyFwdLearnPckts | read-write | mandatory | Enable or Disable forwarding of learn-packets. A learn-packet is the packet that was used to learn a station the first time the switch received traffic from th… |
| 1.3.6.1.4.1.343.6.11.2 | NodelocalConfigurationChange | Changes made to local VLAN configuration. | ||
| 1.3.6.1.4.1.343.6.11.2 | NodevlanLearned | |||
| 1.3.6.1.4.1.343.6.11.2.1 | ScalarvlanLearnedVersion | read-only | mandatory | The version of the run-time database used for keeping actual VLAN information. |
| 1.3.6.1.4.1.343.6.11.2.2 | ScalarvlanLearnedServerState | read-only | mandatory | State of the MAC-VLAN server: initActive - Initialising to become server initPassive - Initialising to become client passive - Station is client active - Stati… |
| 1.3.6.1.4.1.343.6.11.2.3 | ScalarvlanLearnedServerPriority | read-only | mandatory | The priority of the server function. The lower the priority, the more likely that this device becomes the server. If there is a tie between the priorities the … |
| 1.3.6.1.4.1.343.6.11.2.4 | ScalarvlanLearnedServerIPAddress | read-only | mandatory | The IP address of the current MAC-VLAN server |
| 1.3.6.1.4.1.343.6.11.2.5 | ScalarvlanLearnedServerMACAddress | read-only | mandatory | The MAC address of the current MAC-VLAN server |
| 1.3.6.1.4.1.343.6.11.2.6 | ScalarvlanLearnedServerPortNo | read-only | mandatory | The port number through which the device is connected to the server. Only valid if device is client |
| 1.3.6.1.4.1.343.6.11.2.7 | ScalarvlanLearnedServerNameChangeTimer | read-write | mandatory | Timer value used when renaming a VLAN DOMAIN. While timer is running, both the old and new Domain Name is accepted by all switches in the Domain. When renaming… |
| 1.3.6.1.4.1.343.6.11.2.8 | ScalarvlanLearnedServerExpiryTimer | read-write | mandatory | Time a device will wait before assuming the MAC-VLAN server is lost. If server is assumed lost, the device will search for a new server, or become the server i… |
| 1.3.6.1.4.1.343.6.11.2.9 | TablevlanLearnedMacTable | not-accessible | mandatory | A list of all active stations in a VLAN in the domain for the device. |
| 1.3.6.1.4.1.343.6.11.2.9.1 | RowlearnedMacEntry | not-accessible | mandatory | A VLAN active station. For each station there is information about its: MAC address. If possible additional information about on which access-port the station … |
| 1.3.6.1.4.1.343.6.11.2.9.1.1 | ColumnlearnedMacAddress | read-only | mandatory | The MAC address for a station. |
| 1.3.6.1.4.1.343.6.11.2.9.1.2 | ColumnlearnedMacType | read-only | mandatory | The 2 byte protocol/length identifier specified in a ethernet packet according to IEEE802.3 / ETHERNET II |
| 1.3.6.1.4.1.343.6.11.2.9.1.3 | ColumnlearnedMacPortNo | read-only | mandatory | The access-port on the VLAN device for a learned station. If portNo = 0 it means that this MAC is not learned locally. |
| 1.3.6.1.4.1.343.6.11.2.9.1.4 | ColumnlearnedMacIpAddress | read-only | mandatory | The IP-address of a learned station. |
| 1.3.6.1.4.1.343.6.11.2.10 | TablevlanLearnedMacVlanTable | not-accessible | mandatory | A membership list of which stations are included in which VLANs in the actual domain. |
| 1.3.6.1.4.1.343.6.11.2.10.1 | RowlearnedMacVlanEntry | not-accessible | mandatory | For every station (referred to by its MAC address) a list of VLANs that have the station as a member, can be retrieved. |
| 1.3.6.1.4.1.343.6.11.2.10.1.1 | ColumnlearnedMacVlanMac | read-only | mandatory | The MAC address of a learned station |
| 1.3.6.1.4.1.343.6.11.2.10.1.2 | ColumnlearnedMacVlanIndex | read-only | mandatory | The index of this VLAN, to be used when retrieving the next VLAN. |
| 1.3.6.1.4.1.343.6.11.2.10.1.3 | ColumnlearnedMacVlanName | read-only | mandatory | The name of the VLAN. |
| 1.3.6.1.4.1.343.6.11.2.11 | TablevlanLearnedVlanPortTable | not-accessible | mandatory | A table of which VLANs exist on the ports. |
| 1.3.6.1.4.1.343.6.11.2.11.1 | RowlearnedVlanPortEntry | not-accessible | mandatory | For each port a list of VLANs that are active on the port can be retrieved. |
| 1.3.6.1.4.1.343.6.11.2.11.1.1 | ColumnlearnedVlanPortNo | read-only | mandatory | The if-index decribing the requested port. |
| 1.3.6.1.4.1.343.6.11.2.11.1.2 | ColumnlearnedVlanPortVlanIndex | read-only | mandatory | The index of this VLAN, to be used when retrieving the next VLAN. |
| 1.3.6.1.4.1.343.6.11.2.11.1.3 | ColumnlearnedVlanPortVlanName | read-only | mandatory | The name of the VLAN. |
| 1.3.6.1.4.1.343.6.11.2.12 | TablevlanLearnedVlanIdTable | not-accessible | mandatory | Table of active VLAN id's |
| 1.3.6.1.4.1.343.6.11.2.12.1 | RowlearnedVlanIdEntry | not-accessible | mandatory | A VLAN is active in a device, if a station connected to that device has become a member of the VLAN. |
| 1.3.6.1.4.1.343.6.11.2.12.1.1 | ColumnlearnedVlanId | read-only | mandatory | The index of the VLAN. |
| 1.3.6.1.4.1.343.6.11.2.12.1.2 | ColumnlearnedVlanIdVlanName | read-only | mandatory | The name of the VLAN. |
| 1.3.6.1.4.1.343.6.11.2.13 | ScalarvlanLearnedSnmpMgtVlanIds | read-only | mandatory | This object will return a list of VLAN id's for the incoming SNMP request, usable to determine which VLANs the Mgt station itself belongs to. The answer is an … |
| 1.3.6.1.4.1.343.6.11.2.14 | ScalarvlanLearnedMacVlanFlush | read-write | mandatory | Setting this object to 1 will flush the MAC-VLAN table of the entire distributed domain. |
| 1.3.6.1.4.1.343.6.11.3 | NodeinvalidVlanConfiguration | Error in uploaded configuration. | ||
| 1.3.6.1.4.1.343.6.11.3 | NodevlanIsl | |||
| 1.3.6.1.4.1.343.6.11.3.1 | TableislTable | not-accessible | mandatory | A list of interconnected VLAN aware devices sharing the same doamin on a port. |
| 1.3.6.1.4.1.343.6.11.3.1.1 | RowislEntry | not-accessible | mandatory | On each switch vlan link a list of connected devices referred to by MAC- and IP-address. |
| 1.3.6.1.4.1.343.6.11.3.1.1.1 | ColumnislIfIndex | read-only | mandatory | The if-index decribing the requested port. |
| 1.3.6.1.4.1.343.6.11.3.1.1.2 | ColumnislMacAddress | read-only | mandatory | The MAC address of an SVL station. |
| 1.3.6.1.4.1.343.6.11.3.1.1.3 | ColumnislIpAddress | read-only | mandatory | The IP-address of an SVL station |
| 1.3.6.1.4.1.343.6.11.4 | NodevlanEditToken | |||
| 1.3.6.1.4.1.343.6.11.4.1 | ScalareditTokenOwnerMacAddress | read-only | mandatory | The MAC address of the station that is currently locking the global VLAN configuration. |
| 1.3.6.1.4.1.343.6.11.4.2 | ScalareditTokenOwnerIpAddress | read-only | mandatory | The IP-address of the station that is currently locking the global VLAN configuration. |
| 1.3.6.1.4.1.343.6.11.4.3 | ScalareditTokenOwnerSysName | read-only | mandatory | The System Name of the station that is currently locking the global VLAN configuration. |
| 1.3.6.1.4.1.343.6.11.4.4 | ScalareditTokenOwnerApplication | read-only | mandatory | The Application that is currently locking the global VLAN configuration. |
| 1.3.6.1.4.1.343.6.11.4.5 | ScalareditTokenOwnerSnmpIpAddress | read-only | mandatory | The IP address of the IP host that has taken the edit token via SNMP |
| 1.3.6.1.4.1.343.6.11.4.6 | ScalareditTokenClaimReq | read-write | mandatory | This object is used to claim the Token to make changes to the VLAN configuration. Parameters are supplied in a binary coded octet string. Request will fail if … |
| 1.3.6.1.4.1.343.6.11.4.7 | ScalareditTokenLastClaimRspRetVal | read-only | mandatory | Returns the last error code for the Claim Edit Token call. |
| 1.3.6.1.4.1.343.6.11.4.8 | ScalareditTokenReleaseReq | read-write | mandatory | Object used to release the Token. When setting object an integer indicating 1) Abandon changes, 2) Save changes, 3) Save changes and wait for confirmation (if … |
| 1.3.6.1.4.1.343.6.11.4.9 | ScalareditTokenLastReleaseRspRetVal | read-only | mandatory | Returns the last error code for the Release Edit Token call. |
| 1.3.6.1.4.1.343.6.11.4.10 | ScalareditTokenForceReleaseReq | read-write | mandatory | A forced release of the edit token can be issued by an IP host via SNMP by setting this object on the MVS. |
| 1.3.6.1.4.1.343.6.11.4.11 | ScalareditTokenClientState | read-only | mandatory | The edit token state of the client |
| 1.3.6.1.4.1.343.6.11.4.12 | ScalareditTokenTakenTime | read-only | mandatory | The time that the edit token has been allocated (in hundreds of a second) |
| 1.3.6.1.4.1.343.6.11.4.13 | ScalareditTokenLastForceReleaseRspRetVal | read-only | mandatory | Returns the last error code for the Release Edit Token call. |
| 1.3.6.1.4.1.343.6.11.4.14 | ScalareditTokenServerState | read-only | mandatory | The edit token state of the server. |
| 1.3.6.1.4.1.343.6.11.5 | NodedomainNameChange | The VLAN domain name has been changed. | ||
| 1.3.6.1.4.1.343.6.11.6 | NodenewSwitchInDomain | This station is now participating in the domain. | ||
| 1.3.6.1.4.1.343.6.11.6 | NodevlanTrapObjects | |||
| 1.3.6.1.4.1.343.6.11.6.1 | ScalarpreviousVlanDomainName | not-accessible | mandatory | Internal value used when sending SNMP traps |
| 1.3.6.1.4.1.343.6.11.6.2 | ScalarvlanParsingErrorNo | not-accessible | mandatory | Internal value used when sending SNMP traps |
| 1.3.6.1.4.1.343.6.11.6.3 | ScalarvlanParsingErrorText | not-accessible | mandatory | Internal value used when sending SNMP traps |
| 1.3.6.1.4.1.343.6.11.6.4 | ScalaroriginatorIpAddress | not-accessible | mandatory | Internal value used when sending SNMP traps |
| 1.3.6.1.4.1.343.6.11.6.5 | ScalaroriginatorMacAddress | not-accessible | mandatory | Internal value used when sending SNMP traps |
| 1.3.6.1.4.1.343.6.11.6.6 | ScalaroriginatorSysName | not-accessible | mandatory | Internal value used when sending SNMP traps |
| 1.3.6.1.4.1.343.6.11.6.7 | ScalaroriginatorMgtStationIpAddress | not-accessible | mandatory | Internal value used when sending SNMP traps |
| 1.3.6.1.4.1.343.6.11.7 | NodemissingSwitchInDomain | A switch is no longer in the domain. | ||
| 1.3.6.1.4.1.343.6.11.8 | NodeeditTokenForceRelease | This station has made a forced release of the edit token for the VLAN configuration | ||
| 1.3.6.1.4.1.343.6.11.9 | NodeeditTokenRequestFailed | A management station tried to allocate the token while it was not available. | ||
| 1.3.6.1.4.1.343.6.11.10 | NodeconfigConfirmFailed | The new configuration rendered the device inaccessible to the management station, and the old configuration has been restored. | ||
| 1.3.6.1.4.1.343.6.11.11 | NodevlanLearnedDatabaseFull | The VLAN learning process was unable to insert an entry in the VLAN database. This may result in a loss of connectivity between some stations. This is not an e… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EthMacAddress | OCTET STRING |