INTELCORPORATION-MULTI-FLEX-SERVER-TC
15 objects
Textual Conventions used within INTELCORPORATION-MULTI-FLEX-SERVER-*MIB
Imported Objects
| INTELCORPORATION-MULTI-FLEX-SERVER-REG | regModule |
| SNMPv2-SMI | MODULE-IDENTITY TimeTicks Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.343.2.19.1.1.1.2 | IdentitymultiFlexServerTcModule | Textual Conventions used within INTELCORPORATION-MULTI-FLEX-SERVER-*MIB |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EnabledStatus | INTEGER { enabled(1), disabled(2) } | current | A simple status value for the object. |
| FaultLedStates | INTEGER { notApplicable(-32), unknown(-16), identify(-4), dataNotAvailable(-1), normal(0), degraded(1), fault(2) } | current | Fault LED States type |
| FeatureSet | INTEGER { notApplicable(-32), unknown(-16), unsupported (0), supported (1) } | current | The ENUM definition for feature set support. |
| IdromBinary16 | OCTET STRING (SIZE (16)) | current | Means of displaying 16 byte binary fields within the IDROM as hexadecimal digits. Used for the Serial Number, Part Number, and Asset Tag fields. All above fields are only 16 bytes as per the IDROM spec. |
| Index | Unsigned32 (1..255) | current | Generial Index definition used in tables. |
| INT32withException | INTEGER { notApplicable(-32), unknown(-16) } | current | INTEGER type, but adds enumerations for exceptions when a positive integral value isn't available |
| JackType | INTEGER { other(1), rj45(2), rj45S(3), db9(4), bnc(5), fAUI(6), mAUI(7), fiberSC(8), fiberMIC(9), fiberST(10), telco(11), mtrj(12), hssdc(13), fiberLC(14) } | current | Common enumeration values for repeater and interface MAU jack types. |
| PortList | OCTET STRING | current | Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents… |
| Power | INTEGER { unknown(-1), passive(0) } | current | Static power generation / consumption (in watts): <0 - Negative numbers indicate device consumes power (in watts) >0 - Positive numbers indicate device generates power (in watts) 0 - Device is passive (does not not cons… |
| PowerLedStates | INTEGER { notApplicable(-32), unknown(-16), identify(-4), dataNotAvailable(-1), off(0), standby(1), on(2), forcedOff(3), hardReset(4) } | current | Power LED States type Status enumerations: off, standby, on Settable values: off - soft shutdown on - power up forcedOff - forced power down (unclean) hardReset - reset board |
| Presence | INTEGER { notApplicable(-32), unknown(-16), identify(-4), timedout (-2), absent (0), present (1) } | current | The ENUM definition for presence of an object with optional identify request. unknown - any thing that is outside of the following known types absent - known not to be present (generally reported by the hardware) presen… |
| PresenceLedStates | INTEGER { notApplicable(-32), unknown(-16), alwaysOn(-3), dataNotAvailable(-1), off(0), fifteenSeconds(15), thirtySeconds(30), sixtySeconds(60), twoMinutes(120) } | current | The ENUM definition for the state of the presence LED with optional identify request. unknown - any thing that is outside of the following known types off - known to be present, but LED is off on - known to be present, … |
| TimeFilter | TimeTicks | current | To be used for the index to a table. Allows an application to download only those rows changed since a particular time. A row is considered changed if the value of any object in the row changes or if the row is created … |
| VlanIndex | Unsigned32 | current | A value used to index per-VLAN tables: values of 0 and 4095 are not permitted; if the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see Vlan… |