INTELCORPORATIONBASEBOARDRESOURCES-MIB
79 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.343 | Nodeintel | |||
| 1.3.6.1.4.1.343.2 | Nodeproducts | |||
| 1.3.6.1.4.1.343.2.6 | Nodeserver-products | |||
| 1.3.6.1.4.1.343.2.6.2 | Nodeplatforms | |||
| 1.3.6.1.4.1.343.2.6.2.3 | Noderesources | |||
| 1.3.6.1.4.1.343.2.6.2.3.1 | NodedmtfGroups | |||
| 1.3.6.1.4.1.343.2.6.2.3.1.1 | TabletComponentid | not-accessible | mandatory | This group defines the attributes common to all components. This groupis required. |
| 1.3.6.1.4.1.343.2.6.2.3.1.1.1 | RoweComponentid | not-accessible | mandatory | |
| 1.3.6.1.4.1.343.2.6.2.3.1.1.1.1 | Columna1Manufacturer | read-only | mandatory | Manufacturer of this system. |
| 1.3.6.1.4.1.343.2.6.2.3.1.1.1.2 | Columna1Product | read-only | mandatory | Product name for this system. |
| 1.3.6.1.4.1.343.2.6.2.3.1.1.1.3 | Columna1Version | read-only | mandatory | Version number of this system. |
| 1.3.6.1.4.1.343.2.6.2.3.1.1.1.4 | Columna1SerialNumber | read-only | mandatory | Serial number for this system. |
| 1.3.6.1.4.1.343.2.6.2.3.1.1.1.5 | Columna1Installation | read-only | mandatory | The time and date when this component was installed. |
| 1.3.6.1.4.1.343.2.6.2.3.1.1.1.6 | Columna1Verify | read-only | mandatory | A code that provides a level of verification that the component is stillinstalled and working. |
| 1.3.6.1.4.1.343.2.6.2.3.1.41 | TabletSystemResources2 | not-accessible | mandatory | This group describes the base level of Memory, I/O, DMA, and INT(interrupt) resources that are used by a device in the system. |
| 1.3.6.1.4.1.343.2.6.2.3.1.41.1 | RoweSystemResources2 | not-accessible | mandatory | |
| 1.3.6.1.4.1.343.2.6.2.3.1.41.1.1 | Columna41SystemResourcesIndex | read-only | mandatory | A number that uniquely identifies the rows in this table. |
| 1.3.6.1.4.1.343.2.6.2.3.1.41.1.2 | Columna41ResourceUser | read-only | mandatory | A unique number for each different 'resource user' that has resourcesspecified in this table. |
| 1.3.6.1.4.1.343.2.6.2.3.1.41.1.3 | Columna41ResourceSet | read-only | mandatory | A number used as the ID of a set of Memory, I/O, DMA and/or INTresources for the resource user. |
| 1.3.6.1.4.1.343.2.6.2.3.1.41.1.4 | Columna41ResourceAssignment | read-only | mandatory | Describes the state of the assignment of this set of resources. (Note: Thisvalue must be the same for all resources within a given set.) |
| 1.3.6.1.4.1.343.2.6.2.3.1.41.1.5 | Columna41ResourceType | read-only | mandatory | The type of resource described by this row. |
| 1.3.6.1.4.1.343.2.6.2.3.1.41.1.6 | Columna41ResourceNumber | read-only | mandatory | DMA or IRQ number - 0 for Memory and I/O ranges. This is theinterrupt or DMA number relative to the bus that the interrupt is sourced from. |
| 1.3.6.1.4.1.343.2.6.2.3.1.41.1.7 | Columna41ResourceInfoId | read-only | mandatory | ID of the row in the 'Info' table for this type of system resource. E.g. ifthis Resource Type is 'I/O' then this would be an index into the 'System Resource I/… |
| 1.3.6.1.4.1.343.2.6.2.3.1.41.1.8 | Columna41StartAddress | read-only | mandatory | Starting physical address for this memory range, or the minimum baseaddress if this attribute is being used to describe a programmable range. 0 for IRQ andDMA … |
| 1.3.6.1.4.1.343.2.6.2.3.1.41.1.9 | Columna41EndAddress | read-only | mandatory | Ending physical address (address of last byte) for this memory range, orthe maximum configurable base address if this attribute is being used to describe aprog… |
| 1.3.6.1.4.1.343.2.6.2.3.1.41.1.10 | Columna41ResourceSize | read-only | mandatory | Number of consecutive bytes that a memory or I/O resource consumes. 0for IRQ and DMA resources. |
| 1.3.6.1.4.1.343.2.6.2.3.1.41.1.11 | Columna41BaseAlignment | read-only | mandatory | Alignment of Start Address, in bytes. Indicates the granularity of theincrements in which a programmable range can be set. |
| 1.3.6.1.4.1.343.2.6.2.3.1.41.1.12 | Columna41Shareable | read-only | mandatory | Indicates whether the resource is shareable. |
| 1.3.6.1.4.1.343.2.6.2.3.1.41.1.13 | Columna41Shared | read-only | mandatory | Indicates whether this resource, or a portion of this resource, is sharedwith another device. |
| 1.3.6.1.4.1.343.2.6.2.3.1.42 | TabletSystemResourceDeviceInfo | not-accessible | mandatory | This group describes the base level of Memory, I/O, DMA, and INT(interrupt) resources that are used by a device in the system. |
| 1.3.6.1.4.1.343.2.6.2.3.1.42.1 | RoweSystemResourceDeviceInfo | not-accessible | mandatory | |
| 1.3.6.1.4.1.343.2.6.2.3.1.42.1.1 | Columna42ResourceUser | read-only | mandatory | A number that uniquely identifies this device. This number may bederived from the 'device number' that is assigned by 'Plug N Play', or may be uniquelyassigned… |
| 1.3.6.1.4.1.343.2.6.2.3.1.42.1.2 | Columna42DeviceId | read-only | mandatory | Physical Device ID from Config manager info. Equal to theCISTPL_ ANFID field for PCMCIA devices. 0xFFFFFFFF = Unknown |
| 1.3.6.1.4.1.343.2.6.2.3.1.42.1.3 | Columna42DeviceSerialNumber | read-only | mandatory | Device Serial Number from Config manager info. 0 = Undefined |
| 1.3.6.1.4.1.343.2.6.2.3.1.42.1.4 | Columna42LogicalDeviceId-ClassCode | read-only | mandatory | Logical device ID for PnP ISA devices, Class code for PCI devices, CISTPL_FUNCID for PCMCIA devices. 0xFFFFFFFF = Undefined, 0 = reserved |
| 1.3.6.1.4.1.343.2.6.2.3.1.42.1.5 | Columna42DeviceFlags | read-only | mandatory | Device flags from config manager info.Bit 0: 1 = device has been initializedBit 1: 1 = device is enabledBit 2: 1 = device config has been lockedBit 3: 1 = devi… |
| 1.3.6.1.4.1.343.2.6.2.3.1.42.1.6 | Columna42DeviceNumber | read-only | mandatory | Device Number for PCI Devices, Logical Device number for PnPDevices. 0 otherwise. |
| 1.3.6.1.4.1.343.2.6.2.3.1.42.1.7 | Columna42FunctionNumber | read-only | mandatory | Function Number for PCI & EISA Devices. 0 otherwise. |
| 1.3.6.1.4.1.343.2.6.2.3.1.42.1.8 | Columna42BusType | read-only | mandatory | Bus number (0-255) for PCI Devices, Slot number for EISA and PnPDevices, Card logical socket number for PCMCIA devices. Zero otherwise. |
| 1.3.6.1.4.1.343.2.6.2.3.1.42.1.9 | Columna42CmReserved | read-only | mandatory | Data from the Reserved field of the Configuration Manager bus accessstructure, or 0. |
| 1.3.6.1.4.1.343.2.6.2.3.1.43 | TabletSystemResourceMemoryInfo | not-accessible | mandatory | This group presents additional information about memory resource thathave been defined in the System Resources table. |
| 1.3.6.1.4.1.343.2.6.2.3.1.43.1 | RoweSystemResourceMemoryInfo | not-accessible | mandatory | |
| 1.3.6.1.4.1.343.2.6.2.3.1.43.1.1 | Columna43SystemResourceMemoryInfoIndex | read-only | mandatory | A number the uniquely identifies rows in this table. |
| 1.3.6.1.4.1.343.2.6.2.3.1.43.1.2 | Columna43IsapcmciaRangeDescriptor | read-only | mandatory | For PnP ISA/PCMCIA memory range descriptor compatibility. |
| 1.3.6.1.4.1.343.2.6.2.3.1.43.1.3 | Columna43EisaRangeDescriptor | read-only | mandatory | For PnP EISA memory range descriptor compatibility. |
| 1.3.6.1.4.1.343.2.6.2.3.1.43.1.4 | Columna43DecodeSupport | read-only | mandatory | For PnP memory range descriptor compatibility. |
| 1.3.6.1.4.1.343.2.6.2.3.1.43.1.5 | Columna43Cacheable | read-only | mandatory | Indicates whether it is allowable for this memory range to be cached ornot. |
| 1.3.6.1.4.1.343.2.6.2.3.1.43.1.6 | Columna43CacheType | read-only | mandatory | Indicates Cache Type that is compatible with this resource. |
| 1.3.6.1.4.1.343.2.6.2.3.1.43.1.7 | Columna43Read-write | read-only | mandatory | Indicates the read-write accessibility of this memory resource. |
| 1.3.6.1.4.1.343.2.6.2.3.1.44 | TabletSystemResourceIoInfo | not-accessible | mandatory | This group presents additional information about I/O resources that havebeen defined in the System Resources table. |
| 1.3.6.1.4.1.343.2.6.2.3.1.44.1 | RoweSystemResourceIoInfo | not-accessible | mandatory | |
| 1.3.6.1.4.1.343.2.6.2.3.1.44.1.1 | Columna44SystemResourceIoInfoIndex | read-only | mandatory | A number the uniquely identifies rows in this table. |
| 1.3.6.1.4.1.343.2.6.2.3.1.44.1.2 | Columna44IoDecode | read-only | mandatory | Number of bits used for I/O decode |
| 1.3.6.1.4.1.343.2.6.2.3.1.45 | TabletSystemResourceIrqInfo | not-accessible | mandatory | This group presents additional information about I/O resources that havebeen defined in the System Resources table. |
| 1.3.6.1.4.1.343.2.6.2.3.1.45.1 | RoweSystemResourceIrqInfo | not-accessible | mandatory | |
| 1.3.6.1.4.1.343.2.6.2.3.1.45.1.1 | Columna45SystemResourceIrqInfoIndex | read-only | mandatory | A number the uniquely identifies rows in this table. |
| 1.3.6.1.4.1.343.2.6.2.3.1.45.1.2 | Columna45TriggerType | read-only | mandatory | The trigger type for this interrupt. |
| 1.3.6.1.4.1.343.2.6.2.3.1.45.1.3 | Columna45TriggerLevel | read-only | mandatory | The trigger level for this interrupt. |
| 1.3.6.1.4.1.343.2.6.2.3.1.46 | TabletSystemResourceDmaInfo | not-accessible | mandatory | This group presents additional information about DMA resources thathave been defined in the System Resources table. |
| 1.3.6.1.4.1.343.2.6.2.3.1.46.1 | RoweSystemResourceDmaInfo | not-accessible | mandatory | |
| 1.3.6.1.4.1.343.2.6.2.3.1.46.1.1 | Columna46SystemResourceDmaInfoIndex | read-only | mandatory | A number the uniquely identifies rows in this table. |
| 1.3.6.1.4.1.343.2.6.2.3.1.46.1.2 | Columna46DmaTransferWidth | read-only | mandatory | Width of DMA transfers supported |
| 1.3.6.1.4.1.343.2.6.2.3.1.46.1.3 | Columna46DmaAddressSize | read-only | mandatory | The width of the DMA address. |
| 1.3.6.1.4.1.343.2.6.2.3.1.46.1.4 | Columna46DmaMaximumTransferSize | read-only | mandatory | The maximum number of bytes that can be transferred by thisDMA Channel. |
| 1.3.6.1.4.1.343.2.6.2.3.1.46.1.5 | Columna46DmaTransferPreference | read-only | mandatory | DMA transfer type preference. |
| 1.3.6.1.4.1.343.2.6.2.3.1.46.1.6 | Columna46BusMaster | read-only | mandatory | Indicates whether the device is using DMA is a bus master. |
| 1.3.6.1.4.1.343.2.6.2.3.1.46.1.7 | Columna46ByteMode | read-only | mandatory | Indicates whether DMA may execute in 'count by byte' mode. |
| 1.3.6.1.4.1.343.2.6.2.3.1.46.1.8 | Columna46WordMode | read-only | mandatory | Indicates whether DMA may execute in 'count by word' mode. |
| 1.3.6.1.4.1.343.2.6.2.3.1.46.1.9 | Columna46ChannelTiming | read-only | mandatory | DMA channel speed support. |
| 1.3.6.1.4.1.343.2.6.2.3.1.46.1.10 | Columna46Type-cTiming | read-only | mandatory | Indicates whether C type (burst) timing is supported. |
| 1.3.6.1.4.1.343.2.6.2.3.1.1001 | TabletMiftomib | not-accessible | mandatory | This group defines attributes required for DMI to SNMP translati n. |
| 1.3.6.1.4.1.343.2.6.2.3.1.1001.1 | RoweMiftomib | not-accessible | mandatory | |
| 1.3.6.1.4.1.343.2.6.2.3.1.1001.1.1 | Columna1001MibName | read-only | mandatory | The MIB name that defines this MIF |
| 1.3.6.1.4.1.343.2.6.2.3.1.1001.1.2 | Columna1001MibOid | read-only | mandatory | The MIB Object Identifier that corresponds to this MIF |
| 1.3.6.1.4.1.343.2.6.2.3.1.1001.1.3 | Columna1001DisableTrap | read-write | mandatory | This attribute can be changed to disable sending oftraps from this component |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DmiComponentIndex | INTEGER | ||
| DmiDateX | OCTET STRING (SIZE (28)) | ||
| DmiInteger | INTEGER | ||
| DmiInteger64X | INTEGER (-18446744073709551615..18446744073709551615) |