INXNTS-MIB
176 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC1155-SMI | Counter Gauge IpAddress NetworkAddress OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1 | Nodeinternet | |||
| 1.3.6.1.3 | Nodeexperimental | |||
| 1.3.6.1.3.3 | Nodedot3 | |||
| 1.3.6.1.3.3.1 | Tabledot3Table | not-accessible | mandatory | A list of the INX-NTS Ethernet interface`s operational attributes, such as whether it is configured for multicast receive and the status of the MAC sublayer. Y… |
| 1.3.6.1.3.3.1.1 | Rowdot3Entry | not-accessible | mandatory | An entry in the INX-NTS Interface table. (See the previous variable, INX-NTS Interface Table, for an explanation of this table.) You cannot access this variabl… |
| 1.3.6.1.3.3.1.1.1 | Columndot3Index | read-only | mandatory | The value assigned to the INX-NTS Ethernet interface. Because the INX-NTS has only one interface, this variable always returns 1. |
| 1.3.6.1.3.3.1.1.2 | Columndot3InitializeMAC | read-write | mandatory | The initialization status of the MAC and PLS subsystems of the interface. Because the MAC and PLS subsystems on the INX-NTS are initialized at power-up and rem… |
| 1.3.6.1.3.3.1.1.3 | Columndot3MACSubLayerStatus | read-write | mandatory | The operational status of the MAC sublayer, i.e., whether it is ready to transmit and receive frames. Because this sublayer is always active in the INX-NTS, th… |
| 1.3.6.1.3.3.1.1.4 | Columndot3MulticastReceiveEnabled | read-write | mandatory | The Multicast Receive status, i.e., whether the INX-NTS is configured to receive frames with a multicast address. Because Multicast Receive is always enabled o… |
| 1.3.6.1.3.3.1.1.5 | Columndot3AlignmentErrors | read-only | mandatory | The number of frames received on the interface that are not an integral number of octets in length (i.e., the number of bits they contain is not a multiple of … |
| 1.3.6.1.3.3.1.1.6 | Columndot3FCSErrors | read-only | mandatory | The number of frames received on the interface that are an integral number of octets in length (i.e., the number of bits they contain is a multiple of eight) t… |
| 1.3.6.1.3.3.2 | Tabledot3TxTable | not-accessible | mandatory | A list of transmit errors and statistics for the INX-NTS Ethernet interface. You cannot access this variable; it is only a table marker in the MIB. |
| 1.3.6.1.3.3.2.1 | Rowdot3TxEntry | not-accessible | mandatory | An entry in the Interface Transmit table. (See the previous variable, Interface Transmit Table, for an explanation of this table.) You cannot access this varia… |
| 1.3.6.1.3.3.2.1.1 | Columndot3TxIndex | read-only | mandatory | The value assigned to the INX-NTS Ethernet interface. Because the INX-NTS has only one interface, this variable always returns 1. |
| 1.3.6.1.3.3.2.1.2 | Columndot3TxSingleCollisionFrames | read-only | mandatory | The number of frames that were successfully transmitted after experiencing one and only one collision. |
| 1.3.6.1.3.3.2.1.3 | Columndot3TxMultipleCollisionFrames | read-only | mandatory | The number of frames that were successfully transmitted after experiencing more than one collision. |
| 1.3.6.1.3.3.2.1.4 | Columndot3TxSQETestErrors | read-only | mandatory | The number of frames for which the INX-NTS's collision detect logic did not detect a Signal-Quality-Error-Test (SQE-Test) signal immediately after a packet tra… |
| 1.3.6.1.3.3.3 | Tabledot3XRxTable | not-accessible | mandatory | A list of receive errors and statistics for the INX-NTS Ethernet interface. You cannot access this variable; it is only a table marker in the MIB. |
| 1.3.6.1.3.3.3.1 | Rowdot3XRxEntry | not-accessible | mandatory | An entry in the Interface Receive table. (See the previous variable, Interface Receive Table, for an explanation of this table.) You cannot access this variabl… |
| 1.3.6.1.3.3.3.1.1 | Columndot3XRxIndex | read-only | mandatory | The value assigned to the INX-NTS Ethernet interface. Because the INX-NTS has only one interface, this variable always returns 1. |
| 1.3.6.1.3.3.3.1.2 | Columndot3XRxFrameTooLongs | read-only | mandatory | The number of frames received on the interface that exceed the maximum permitted frame size, i.e., 1180 octets. |
| 1.3.6.1.3.3.3.1.3 | Columndot3XRxInRangeLengthErrors | read-only | mandatory | The number of in-range length errors received. IEEE 802.3 frames contain a length field, indicating the length of the frame. If the value in the length field a… |
| 1.3.6.1.3.3.3.1.4 | Columndot3XRxOutOfRangeLengthFields | read-only | mandatory | The number of out-of-range length errors received. IEEE 802.3 frames contain a length field, indicating the length of the frame. If the length of the frame is … |
| 1.3.6.1.3.3.3.1.5 | Columndot3XRxInternalMACReceiveErrors | read-only | mandatory | The number of frames the interface could not receive because of an internal MAC sublayer receive error. This variable returns frames not counted by the Too Lon… |
| 1.3.6.1.3.3.3.1.6 | Columndot3XRxAutoPartitionStatus | read-write | mandatory | The autopartition status of the INX-NTS. Devices that support autopartitioning have the ability to autonomously disconnect from the network when they sense tro… |
| 1.3.6.1.3.3.3.1.7 | Columndot3XRxAutoPartitionLog | read-only | mandatory | The number of autopartitions the INX-NTS has performed. Devices that support autopartitioning maintain a log of the number of times they disconnected from the … |
| 1.3.6.1.3.3.3.1.8 | Columndot3XRxLastSourceAddress | read-only | mandatory | The source address of the last frame successfully received. Because this value changes too often to be useful, the INX-NTS interface does not record the last s… |
| 1.3.6.1.3.3.3.1.9 | Columndot3XRxSourceAddressLog | read-only | mandatory | The number of times that the value of Last Good Source Address Recd has changed. The INX-NTS interface does not log source address changes; therefore, this var… |
| 1.3.6.1.3.3.4 | Tabledot3XTxTable | not-accessible | mandatory | A list of transmit errors and statistics for the INX-NTS Ethernet interface. You cannot access this variable; it is only a table marker in the MIB. |
| 1.3.6.1.3.3.4.1 | Rowdot3XTxEntry | not-accessible | mandatory | An entry in the Interface Xmit Error/Stat table. (See the previous variable, Interface Xmit Error/Stat Table, for an explanation of this table.) You cannot acc… |
| 1.3.6.1.3.3.4.1.1 | Columndot3XTxIndex | read-only | mandatory | The value assigned to the INX-NTS Ethernet interface. Because the INX-NTS has only one interface, this variable always returns 1. |
| 1.3.6.1.3.3.4.1.2 | Columndot3XTxEnabled | read-write | mandatory | The transmit status of the interface, i.e., whether it is able to transmit frames. Because transmit is always enabled on the INX-NTS, this variable always retu… |
| 1.3.6.1.3.3.4.1.3 | Columndot3XTxDeferredTransmissions | read-only | mandatory | The number of times the INX-NTS deferred transmission of data because it sensed traffic on the network. Because the INX-NTS does not record deferrals, this var… |
| 1.3.6.1.3.3.4.1.4 | Columndot3XTxLateCollisions | read-only | mandatory | The number of times that a collision has been detected on this bus later than 512 bit times from frame start. |
| 1.3.6.1.3.3.4.1.5 | Columndot3XTxExcessiveCollisions | read-only | mandatory | The number of frames the interface could not transmit because of excessive collisions. |
| 1.3.6.1.3.3.4.1.6 | Columndot3XTxInternalMACTransmitErrors | read-only | mandatory | The number of frames the interface could not transmit because of an internal MAC sublayer transmit error. This variable counts frames not counted by the Late C… |
| 1.3.6.1.3.3.4.1.7 | Columndot3XTxCarrierSenseErrors | read-only | mandatory | The number of times that the carrier-sense condition was lost or never asserted when the INX-NTS attempted to transmit a frame on the interface. This count is … |
| 1.3.6.1.3.3.4.1.8 | Columndot3XTxExcessiveDeferrals | read-only | mandatory | The number of frames the INX-NTS deferred transmitting for an excessive period of time. Because the INX-NTS interface does not record deferrals, this variable … |
| 1.3.6.1.3.3.4.1.9 | Columndot3XTxTDR | read-only | mandatory | The status of Time Domain Reflectometry (TDR) on the INX-NTS. TDR is the ability of a device to check the viability of a cable by sending a signal to the end o… |
| 1.3.6.1.3.3.5 | Tabledot3CollTable | not-accessible | mandatory | A histogram representing the frequency of collisions on the interface. In the Collision Frequency histogram, one dimension of each cell represents Collisions p… |
| 1.3.6.1.3.3.5.1 | Rowdot3CollEntry | not-accessible | mandatory | An entry in the Collision Frequency table. (See the previous variable, Collision Frequency Table, for an explanation of this table.) You cannot access this var… |
| 1.3.6.1.3.3.5.1.1 | Columndot3CollIndex | read-only | mandatory | The value assigned to the INX-NTS Ethernet interface. Because the INX-NTS has only one interface, this variable always returns 1. |
| 1.3.6.1.3.3.5.1.2 | Columndot3CollCount | read-only | mandatory | The number of media collisions per frame indicated by one cell in the collision histogram. The INX-NTS tracks the number of collisions up to 15. |
| 1.3.6.1.3.3.5.1.3 | Columndot3CollFrequency | read-only | mandatory | The number of frames that were transmitted after experiencing exactly Collisions per Frame collisions on the INX-NTS Ethernet interface (see the previous varia… |
| 1.3.6.1.4 | Nodeprivate | |||
| 1.3.6.1.4.1 | Nodeenterprises | |||
| 1.3.6.1.4.1.28 | Nodeinterlan | |||
| 1.3.6.1.4.1.28.1 | NoderiProducts | |||
| 1.3.6.1.4.1.28.1.2 | NoderiProdNts | |||
| 1.3.6.1.4.1.28.1.3 | NoderiProdLdc | |||
| 1.3.6.1.4.1.28.1.3.4 | NoderiLdcNts | |||
| 1.3.6.1.4.1.28.3 | NoderiTelnet | |||
| 1.3.6.1.4.1.28.3.1 | ScalartnCount | read-only | mandatory | The number of Telnet sessions that have been initiated from the INX-NTS. |
| 1.3.6.1.4.1.28.3.2 | TabletnTable | not-accessible | mandatory | A table containing Telnet session-specific information that is appropriate to whatever side of a session the INX-NTS happens to be. There is one entry in the t… |
| 1.3.6.1.4.1.28.3.2.1 | RowtnEntry | not-accessible | mandatory | Information about a particular Telnet session. This variable is an entry in the Telnet Session table. (See the previous variable, Telnet Session Table, for an … |
| 1.3.6.1.4.1.28.3.2.1.1 | ColumntnPort | read-only | mandatory | The index value that uniquely identifies the terminal port table entry to which this entry is applicable. |
| 1.3.6.1.4.1.28.3.2.1.2 | ColumntnLocalIpAddress | read-only | mandatory | The local IP address of the TCP connection that this Telnet session is using. |
| 1.3.6.1.4.1.28.3.2.1.3 | ColumntnRemoteIpAddress | read-only | mandatory | The remote IP address of the TCP connection that this Telnet session is using. |
| 1.3.6.1.4.1.28.3.2.1.4 | ColumntnLocalPort | read-only | mandatory | The local port number of the TCP connection that this Telnet session is using. |
| 1.3.6.1.4.1.28.3.2.1.5 | ColumntnRemotePort | read-only | mandatory | The remote port number of the TCP connection that this Telnet session is using. |
| 1.3.6.1.4.1.28.3.2.1.6 | ColumntnUpTime | read-only | mandatory | The amount of time that has elapsed since the Telnet session was established. |
| 1.3.6.1.4.1.28.3.2.1.7 | ColumntnOptionsOn | read-only | mandatory | Indicates which options are on/enabled/in the will/do state. Each octet in the string contains the numerical value of an option that is on. For example, if a s… |
| 1.3.6.1.4.1.28.3.2.1.8 | ColumntnState | read-only | mandatory | The state of the session. o serverActive(1) indicates that the INX-NTS is the Telnet server, and that a session is active-i.e., a user has logged in to this en… |
| 1.3.6.1.4.1.28.3.2.1.9 | ColumntnUserId | read-only | mandatory | The identification of the user at the INX-NTS end of the Telnet session. Because user IDs are not implemented in the INX-NTS, this variable always returns a nu… |
| 1.3.6.1.4.1.28.3.2.1.10 | ColumntnOctetsReceived | read-only | mandatory | The number of octets of data received from the other end of the session. Because the INX-NTS does not keep octet counts for Telnet connections, this variable a… |
| 1.3.6.1.4.1.28.3.2.1.11 | ColumntnOctetsSent | read-only | mandatory | The number of octets of data sent to the other end of the session. Because the INX-NTS does not keep octet counts for Telnet connections, this variable always … |
| 1.3.6.1.4.1.28.3.2.1.12 | ColumntnNextType | read-only | mandatory | The protocol used by the next session in the set of sessions currently established on this port. Because the INX-NTS does not keep this information for Telnet … |
| 1.3.6.1.4.1.28.3.2.1.13 | ColumntnNextName | read-only | mandatory | The entry in the application protocol table identified by Protocol Type of Next Session. Because the INX-NTS does not keep this information, this variable alwa… |
| 1.3.6.1.4.1.28.4 | NoderiTs | |||
| 1.3.6.1.4.1.28.4.1 | ScalarriTsPortCount | read-only | mandatory | The number of terminal ports on the INX-NTS. Because there are 16 ports on the INX-NTS, this variable always returns 16. |
| 1.3.6.1.4.1.28.4.3 | ScalarriTsSignOn | read-write | mandatory | Allows you to view or change the INX-NTS sign-on message. This message is displayed when you enter command mode from idle mode, and when you connect to a slave… |
| 1.3.6.1.4.1.28.4.4 | ScalarriTsPrompt | read-write | mandatory | Allows you to view or change the INX-NTS command-mode prompt. The default is inx-nts>. The prompt can contain up to 80 characters. |
| 1.3.6.1.4.1.28.4.5 | ScalarriTsAdminPW | read-only | mandatory | The password to use when entering administrative mode in the INX-NTS. For security reasons, this variable always returns the string PASSWORD-RESTRICTED. If you… |
| 1.3.6.1.4.1.28.4.7 | ScalarriTsDomainName | read-write | mandatory | The name that is appended to the host name when the INX-NTS requests a name server and the string entered by the user contains no period. (If the string does c… |
| 1.3.6.1.4.1.28.4.8 | ScalarriTsUpTimeNodeName | read-write | mandatory | The node name to be contained in future RWHO (UPTIME) broadcasts. The name can contain up to seven characters. |
| 1.3.6.1.4.1.28.4.9 | ScalarriTsNumBuffers | read-write | mandatory | The number of buffers that a Telnet, RLOGIN, or LAT process can use for receiving inbound traffic. |
| 1.3.6.1.4.1.28.4.10 | ScalarriTsReadBufferSize | read-write | mandatory | The TCP read buffer size, in octets. |
| 1.3.6.1.4.1.28.4.11 | ScalarriTsWriteBufferSize | read-write | mandatory | The TCP write buffer size, in octets. |
| 1.3.6.1.4.1.28.4.12 | ScalarriTsTcpWindowSize | read-write | mandatory | The TCP default window size, in octets. |
| 1.3.6.1.4.1.28.4.13 | ScalarriTsTcpMaxSeg | read-write | mandatory | The TCP maximum segment size, in octets. |
| 1.3.6.1.4.1.28.4.14 | ScalarriTsBreakChar | read-write | mandatory | Allows you to view or change the INX-NTS break-in character, which permits you to escape from a connection and return to command mode. This variable returns th… |
| 1.3.6.1.4.1.28.4.22 | ScalarriTsFarMemoryFree | read-only | mandatory | The number of available octets in the far memory pool. |
| 1.3.6.1.4.1.28.4.24 | ScalarriTsFarMemoryLowest | read-only | mandatory | The lowest number of octets available in the far memory pool since the INX-NTS was reset. |
| 1.3.6.1.4.1.28.4.25 | ScalarriTsTcpAckTimer | read-write | mandatory | The number of milliseconds that the INX-NTS TCP implementation waits between TCP protocol ACK packets. This variable must be set to a multiple of 50. If it is … |
| 1.3.6.1.4.1.28.4.28 | TableriTsPortTable | not-accessible | mandatory | A table containing management information for a specific port on the INX-NTS. There are 16 entries in this table, one for each port. You cannot access this var… |
| 1.3.6.1.4.1.28.4.28.1 | RowriTsPortEntry | not-accessible | mandatory | An entry in the Port table (see the previous variable, Port Table, for an explanation of this table). You cannot access this variable; it is only a table marke… |
| 1.3.6.1.4.1.28.4.28.1.1 | ColumnriTsPortIndex | read-only | mandatory | A unique value for each port. Because there are 16 ports on the INX-NTS, this variable always returns a value from 1 through 16. |
| 1.3.6.1.4.1.28.4.28.1.2 | ColumnriTsPortFirstType | read-only | mandatory | The protocol used by the first session in the set of sessions for this port. For the INX-NTS, this variable returns telnet(4) for Telnet connections and dummy(… |
| 1.3.6.1.4.1.28.4.28.1.4 | ColumnriTsPortActiveType | read-only | mandatory | The protocol that the currently active session is using to communicate with the other end of the connection. For the INX-NTS, this variable returns telnet(4) f… |
| 1.3.6.1.4.1.28.4.28.1.6 | ColumnriTsPortNumSessions | read-only | mandatory | The current number of sessions that are associated with this port. This number includes sessions for which there is no MIB entry (i.e., any session other than … |
| 1.3.6.1.4.1.28.4.28.1.7 | ColumnriTsPortBaudIn | read-write | mandatory | The baud rate for data received by the port, in bits per second (bps). If you want the INX-NTS to automatically determine baud rates, you can configure it to d… |
| 1.3.6.1.4.1.28.4.28.1.8 | ColumnriTsPortBaudOut | read-write | mandatory | The baud rate for data transmitted by the port, in bits per second (bps). If you want the INX-NTS to automatically determine baud rates, you can configure it t… |
| 1.3.6.1.4.1.28.4.28.1.9 | ColumnriTsPortParity | read-write | mandatory | The parity of the port. Enter a value for parity that matches the parity setting of the device attached to the INX-NTS port. The default is none(1). The parity… |
| 1.3.6.1.4.1.28.4.28.1.11 | ColumnriTsPortDataBits | read-write | mandatory | The number of data bits in each character transmitted between the INX-NTS port and an attached device. Enter a value that matches the setting of the device att… |
| 1.3.6.1.4.1.28.4.28.1.14 | ColumnriTsPortModemControl | read-write | mandatory | The type of modem control, if any, on this port. This setting determines the use of the modem control RS-232 signals. Enter a value that matches the setting of… |
| 1.3.6.1.4.1.28.4.28.1.15 | ColumnriTsPortFlowControlIn | read-write | mandatory | The type of flow control used on the port for received data. o None(1) indicates that no flow control is in use o Xonxoff(2) indicates that software flow contr… |
| 1.3.6.1.4.1.28.4.28.1.16 | ColumnriTsPortFlowControlOut | read-write | mandatory | The type of flow control used on the port for data being sent. o None(1) indicates that no flow control is in use. o Xonxoff(2) indicates that software flow co… |
| 1.3.6.1.4.1.28.4.28.1.17 | ColumnriTsPortRing | read-write | mandatory | The status of the Ring Indicator (RI) RS-232 signal. If you have set modem control (see the Modem Control Type variable) to DCE, you must set Ring to no(1). If… |
| 1.3.6.1.4.1.28.4.28.1.18 | ColumnriTsPortPassword | read-write | mandatory | The password needed to connect to the port. The port password can be up to seven characters long. |
| 1.3.6.1.4.1.28.4.28.1.19 | ColumnriTsPortAbortOut | read-write | mandatory | The ASCII value of the character that invokes a Telnet Abort Output for this port. You use this character to suspend output to the screen for a current process. |
| 1.3.6.1.4.1.28.4.28.1.20 | ColumnriTsPortIntProc | read-write | mandatory | The ASCII value of the character that invokes a Telnet Interrupt Process for this port. You use this character to kill a current process on a UNIX machine. |
| 1.3.6.1.4.1.28.4.28.1.21 | ColumnriTsPortInactiveTimeOut | read-write | mandatory | The number of minutes a port can be inactive before the INX-NTS closes all existing virtual circuits on that port. The timeout range can be from 1 to 255 minut… |
| 1.3.6.1.4.1.28.4.28.1.22 | ColumnriTsPortInactiveTimer | read-write | mandatory | Number of minutes left before the inactivity timer (see the previous variable, Inactivity Timeout Value) expires, and all virtual circuits for this port are cl… |
| 1.3.6.1.4.1.28.4.28.1.23 | ColumnriTsPortMachineInterface | read-write | mandatory | Whether software-generated messages are passed through the port. To suppress the sending of all messages generated by the LAT/TCP software, set this variable t… |
| 1.3.6.1.4.1.28.4.28.1.25 | ColumnriTsPortFunction | read-write | mandatory | The ability of the port to initiate and accept connections. o slave(1) indicates that the port can only accept connections. If it is busy, it will reject a con… |
| 1.3.6.1.4.1.28.4.28.1.26 | ColumnriTsPortState | read-write | mandatory | The state of the port. o disabled(1) indicates that the port cannot be used o active(3) means the port is enabled, and a device is connected. Setting an active… |
| 1.3.6.1.4.1.28.4.28.1.27 | ColumnriTsPortOctetsIn | read-only | mandatory | Total number of octets received on the port from the network connection(s). |
| 1.3.6.1.4.1.28.4.28.1.28 | ColumnriTsPortOctetsOut | read-only | mandatory | Total number of octets sent onto the network connection(s) by the port. |
| 1.3.6.1.4.1.28.4.28.1.30 | ColumnriTsPortXONChar | read-write | mandatory | The ASCII value of the XON character. This setting is meaningful only if XON/XOFF flow control is in use. (See the Flow Control for Data Received and Flow Cont… |
| 1.3.6.1.4.1.28.4.28.1.31 | ColumnriTsPortXOFFChar | read-write | mandatory | The ASCII value of the XOFF character. This setting is meaningful only if XON/XOFF flow control is in use. (See the Flow Control for Data Received and Flow Con… |
| 1.3.6.1.4.1.28.4.28.1.32 | ColumnriTsPortMaxSess | read-only | mandatory | Maximum number of sessions allowed on this port. |
| 1.3.6.1.4.1.28.4.28.1.33 | ColumnriTsPortServerPort | read-write | mandatory | The TCP port number that this serial port uses when listening for Telnet connections. If this port is not configured to listen for inbound connection requests,… |
| 1.3.6.1.4.1.28.4.28.1.36 | ColumnriTsPortTCPMode | read-write | mandatory | The TCP operating mode for the port. o rawsocket(1) means there is no application protocol; data is transferred to and from a TCP socket without interpretation… |
| 1.3.6.1.4.1.28.4.28.1.37 | ColumnriTsPortDefXparent | read-write | mandatory | The default mode of the port. When this variable is set to on(1), you make it possible to enable full eight-bit transparency so that you can send binary or ima… |
| 1.3.6.1.4.1.28.4.28.1.38 | ColumnriTsPortDefEcho | read-write | mandatory | The echo setting for the port. This echo setting determines whether echoing and such functions as line editing are done by the remote host or the local host. R… |
| 1.3.6.1.4.1.28.4.29 | ScalarriTsDomainServerAddress | read-write | mandatory | The Internet address of the host you want to have act as the domain name server. |
| 1.3.6.1.4.1.28.16 | NoderiBoot | |||
| 1.3.6.1.4.1.28.16.1 | ScalarriNumBoots | read-write | mandatory | The number of entries in the boot table. Because there are two files that can be booted (chassis management protocol and high-level protocol), there will alway… |
| 1.3.6.1.4.1.28.16.2 | ScalarriBootServiceOffered | read-write | mandatory | The setting of this variable determines whether this INX-NTS can provide boot images to other systems, returning true(2) if it can and false(1) if it cannot. |
| 1.3.6.1.4.1.28.16.3 | TableriBootTable | not-accessible | mandatory | This table contains boot information for the INX-NTS. You cannot access this variable; it is only a table marker in the MIB. |
| 1.3.6.1.4.1.28.16.3.1 | RowriBootEntry | not-accessible | mandatory | An entry in the Boot table. (See the previous variable, Boot Table, for an explanation of this table.) You cannot access this variable; it is only a table mark… |
| 1.3.6.1.4.1.28.16.3.1.1 | ColumnriBootIndex | read-only | mandatory | A unique value for each entry in the boot table. This variable returns 1 for the Chassis Management Protocol file and 2 for the operating software image file. |
| 1.3.6.1.4.1.28.16.3.1.3 | ColumnriBootFileName | read-write | mandatory | The name of the boot file that the INX-NTS will attempt to load. |
| 1.3.6.1.4.1.28.16.3.1.6 | ColumnriBootIPAddress | read-write | mandatory | The IP address of the node from which the INX-NTS will attempt a TFTP boot. |
| 1.3.6.1.4.1.28.16.3.1.7 | ColumnriBootVersion | read-write | mandatory | The revision level of the boot file. |
| 1.3.6.1.4.1.28.16.3.1.8 | ColumnriBootGateway | read-write | mandatory | The IP address of the gateway through which the INX-NTS can access the boot server. |
| 1.3.6.1.4.1.28.17 | NoderiThresh | |||
| 1.3.6.1.4.1.28.17.1 | ScalarriThCount | read-only | mandatory | the number of active entries in the threshold table. |
| 1.3.6.1.4.1.28.17.2 | ScalarriThMaxCount | read-only | mandatory | The maximum number of active thresholds allowed. |
| 1.3.6.1.4.1.28.17.3 | ScalarriThUniqueIndex | read-write | mandatory | Setting this variable creates a new entry in the Threshold table. You must type a number for the entry when you set this variable, but the INX-NTS assigns the … |
| 1.3.6.1.4.1.28.17.4 | ScalarriThInterval | read-write | mandatory | How often, in seconds, thresholds exceeded are checked. To disable threshold checking, set this variable to 0. |
| 1.3.6.1.4.1.28.17.5 | TableriThTable | not-accessible | mandatory | A table containing information about the thresholds that have been set. You cannot access this variable; it is only a table marker in the MIB. |
| 1.3.6.1.4.1.28.17.5.1 | RowriThEntry | not-accessible | mandatory | An entry in the Threshold table. (See the previous variable, Threshold Table, for an explanation of this table). You cannot access this variable; it is only a … |
| 1.3.6.1.4.1.28.17.5.1.1 | ColumnriThIndex | read-only | mandatory | A unique value for each threshold. |
| 1.3.6.1.4.1.28.17.5.1.2 | ColumnriThStatus | read-write | mandatory | The current status of the threshold. o delete(1) deletes the threshold entry specified. o unset(2) means that the threshold is newly created, currently being c… |
| 1.3.6.1.4.1.28.17.5.1.3 | ColumnriThObject | read-write | mandatory | The complete object identifier of the variable on which this threshold is set. Threshold Object ID can be set only for Counter or Gauge variables. If you attem… |
| 1.3.6.1.4.1.28.17.5.1.4 | ColumnriThThreshold | read-write | mandatory | The threshold value for the variable identified by Threshold Object ID. If this particular variable is a gauge, then whenever its value rises above or drops be… |
| 1.3.6.1.4.1.28.17.5.1.5 | ColumnriThHysteresis | read-write | mandatory | The hysteresis value for the threshold. After a variable's threshold is triggered, the value of the variable must either drop below or rise above a certain val… |
| 1.3.6.1.4.1.28.17.5.1.6 | ColumnriThDirection | read-write | mandatory | The direction in which a change in a Gauge variable's value causes a threshold to trigger. If its direction is up, a trigger occurs when the variable's value r… |
| 1.3.6.1.4.1.28.17.5.1.7 | ColumnriThTriggeredCount | read-only | mandatory | The number of times that this threshold has been triggered. |
| 1.3.6.1.4.1.28.17.5.1.8 | ColumnriThCommunity | read-write | mandatory | The community name to place in the authentication header of the trap PDU. This variable specifies the community to which the trap is to be sent when a threshol… |
| 1.3.6.1.4.1.28.17.5.1.9 | ColumnriThPhysDestination | read-write | mandatory | The Ethernet address of the node to which the trap is to be sent when the threshold is triggered. |
| 1.3.6.1.4.1.28.17.5.1.10 | ColumnriThIPDestination | read-write | mandatory | The IP address of the node to which the trap is to be sent when the threshold is triggered. |
| 1.3.6.1.4.1.28.18 | NoderiSystem | |||
| 1.3.6.1.4.1.28.18.1 | ScalarriSystemHardwareRev | read-only | mandatory | The hardware revision level of the INX-NTS. |
| 1.3.6.1.4.1.28.18.2 | ScalarriSystemFirmwareRev | read-only | mandatory | The firmware revision level of the INX-NTS. |
| 1.3.6.1.4.1.28.18.3 | ScalarriSystemSoftwareRev | read-only | mandatory | The software revision level of the INX-NTS. |
| 1.3.6.1.4.1.28.18.4 | ScalarriSystemSerialNumber | read-only | mandatory | The serial number of the INX-NTS. |
| 1.3.6.1.4.1.28.18.5 | ScalarriSystemReset | read-write | mandatory | The reset state of the INX-NTS. o resetupdate(3) causes the INX-NTS to reset following the next NVRAM update. o notreset(1) has no effect. |
| 1.3.6.1.4.1.28.18.12 | ScalarriSystemTicksPerSecond | read-only | mandatory | The number of internal clock ticks that occur each second on the INX-NTS. |
| 1.3.6.1.4.1.28.18.13 | ScalarriSystemRateInterval | read-write | mandatory | How often, in seconds, any rate statistic maintained by the INX-NTS is checked. The default is 20 seconds. |
| 1.3.6.1.4.1.28.18.15 | ScalarriSystemNVRamWriteCount | read-only | mandatory | The number of times that the NVRAM has been changed. |
| 1.3.6.1.4.1.28.21 | NoderiInternext | |||
| 1.3.6.1.4.1.28.21.1 | ScalarriInxSlot | read-only | mandatory | The INTERNExT chassis slot in which the INX-NTS is located |
| 1.3.6.1.4.1.28.21.2 | ScalarriInxBus | read-only | mandatory | The Ethernet bus connected to the INX-NTS in this slot. |
| 1.3.6.1.4.1.28.21.4 | ScalarriInxSlotConnectivityType | read-only | mandatory | The type of connectivity module attached to the INX-NTS in this slot. If this variable returns the object identifier 1.3.6.1.4.1.28.1.3.4.1.1.1, the connectivi… |
| 1.3.6.1.4.1.28.21.5 | ScalarriInxSlotConnectivityRev | read-only | mandatory | The hardware revision level of the connectivity module attached to the INX-NTS in this slot. |
| 1.3.6.1.4.1.28.21.6 | ScalarriInxSlotConnectivitySerialNumber | read-only | mandatory | The serial number of the connectivity module attached to the INX-NTS in this slot. |
| 1.3.6.1.4.1.28.21.7 | ScalarriInxSlotConnectivityState | read-only | mandatory | The state of the connectivity module attached to the INX-NTS in this slot. For the INX-NTS, this variable always returns enabled(2). |
| 1.3.6.1.4.1.28.21.8 | ScalarriInxSlotConnectivityBus | read-only | mandatory | The bus connected to the connectivity module in this slot. Because the connectivity module is connected to the INX-NTS logic module, rather than to the interna… |
| 1.3.6.1.4.1.28.21.9 | ScalarriInxSlotConnectivityMedia | read-only | mandatory | The Ethernet media type setting for the connectivity module in this slot. This information is not relevant to the INX-NTS connectivity module, so this variable… |
| 1.3.6.1.4.1.28.21.10 | ScalarriInxChassisType | read-only | mandatory | The type of chassis (i.e., 3-slot or 12-slot) in which the INX-NTS is located. |
| 1.3.6.1.4.1.28.22 | NoderiTsRates | |||
| 1.3.6.1.4.1.28.22.1 | ScalarriRateTxSingleCollisionFrames | read-only | mandatory | The rate of frames that were successfully transmitted after experiencing one and only one collision. This variable corresponds to the Single Collisions Transmi… |
| 1.3.6.1.4.1.28.22.2 | ScalarriRateTxMultipleCollisionFrames | read-only | mandatory | The rate of frames that were successfully transmitted after experiencing more than one collision. This variable corresponds to the Multiple Collisions Xmitted … |
| 1.3.6.1.4.1.28.22.3 | ScalarriRateTxDeferredTransmissions | read-only | mandatory | The rate of times the INX-NTS deferred transmission of data because it sensed traffic on the network. Because the INX-NTS does not record deferrals, this varia… |
| 1.3.6.1.4.1.28.22.4 | ScalarriRateTxLateCollisions | read-only | mandatory | The rate of times that a collision has been detected on this bus later than 512 bit times from frame start. This count is not maintained by the INX-NTS, so thi… |
| 1.3.6.1.4.1.28.22.5 | ScalarriRateTxInternalMACTransmitErrors | read-only | mandatory | The rate of frames the interface could not transmit because of an internal MAC sublayer transmit error. This variable corresponds to the MAC Transmit Errors va… |
| 1.3.6.1.4.1.28.22.6 | ScalarriRateTxCarrierSenseErrors | read-only | mandatory | The rate of times that the carrier-sense condition was lost or never asserted when the INX-NTS attempted to transmit a frame on the interface. This variable co… |
| 1.3.6.1.4.1.28.22.7 | ScalarriRateTxExcessiveDeferrals | read-only | mandatory | The rate of frames the INX-NTS deferred transmitting for an excessive period of time. Because the INX-NTS interface does not record deferrals, this variable al… |
| 1.3.6.1.4.1.28.22.8 | ScalarriRateRxInternalMACReceiveErrors | read-only | mandatory | The rate of frames the interface could not receive because of an internal MAC sublayer receive error. This variable corresponds to the MAC Errors Received vari… |
| 1.3.6.1.4.1.28.22.9 | ScalarriRateRxFCSErrors | read-only | mandatory | The rate of frames received on the interface that are an integral number of octets in length (i.e., the number of bits they contain is a multiple of eight) tha… |
| 1.3.6.1.4.1.28.22.10 | ScalarriRateRxAlignmentErrors | read-only | mandatory | The rate of frames received on the interface that are not an integral number of octets in length (i.e., the number of bits they contain is not a multiple of ei… |
| 1.3.6.1.4.1.28.22.11 | ScalarriRateRxInRangeLengthErrors | read-only | mandatory | The rate of in-range length errors received. IEEE 802.3 frames contain a length field, indicating the length of the frame. If the value in the length field and… |
| 1.3.6.1.4.1.28.22.12 | ScalarriRateRxOutofRangeLengthFields | read-only | mandatory | The rate of out-of-range length errors received. IEEE 802.3 frames contain a length field, indicating the length of the frame. If the length of the frame is ou… |
| 1.3.6.1.4.1.28.22.13 | ScalarriRateRxFrameTooLongs | read-only | mandatory | The rate of frames received on the interface that exceed the maximum permitted frame size, i.e., 1012 octets. This variable corresponds to the Too Long Frames … |