IPFWACC-MIB
28 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2021.13.1 | TableipFwAccTable | not-accessible | mandatory | A table with the accounting rules of the IP firewall |
| 1.3.6.1.4.1.2021.13.1.1 | RowipFwAccEntry | not-accessible | mandatory | An accounting rule of the IP firewall |
| 1.3.6.1.4.1.2021.13.1.1.1 | ColumnipFwAccIndex | read-only | mandatory | Reference index for each firewall rule. |
| 1.3.6.1.4.1.2021.13.1.1.2 | ColumnipFwAccSrcAddr | read-only | mandatory | The source address in the firewall rule. |
| 1.3.6.1.4.1.2021.13.1.1.3 | ColumnipFwAccSrcNetMask | read-only | mandatory | The netmask of the source address in the firewall rule. |
| 1.3.6.1.4.1.2021.13.1.1.4 | ColumnipFwAccDstAddr | read-only | mandatory | The destination address in the firewall rule. |
| 1.3.6.1.4.1.2021.13.1.1.5 | ColumnipFwAccDstNetMask | read-only | mandatory | The netmask of the destination address in the firewall rule. |
| 1.3.6.1.4.1.2021.13.1.1.6 | ColumnipFwAccViaName | read-only | mandatory | The name of the interface to which the rule applies. If no interface is associated with the present rule, this should contain a dash (-) . |
| 1.3.6.1.4.1.2021.13.1.1.7 | ColumnipFwAccViaAddr | read-only | mandatory | The address of the interface to which the rule applies. Using this parameter makes sense when multiple addresses are associated to the same physical interface.… |
| 1.3.6.1.4.1.2021.13.1.1.8 | ColumnipFwAccProto | read-only | mandatory | The protocol(s) to which the rule applies. |
| 1.3.6.1.4.1.2021.13.1.1.9 | ColumnipFwAccBidir | read-only | mandatory | Whether the rule works in both directions (i.e. with the source and destination parts swapped) or not. |
| 1.3.6.1.4.1.2021.13.1.1.10 | ColumnipFwAccDir | read-only | mandatory | Whether the rule applies to packets entering or exiting the kernel. |
| 1.3.6.1.4.1.2021.13.1.1.11 | ColumnipFwAccBytes | read-only | mandatory | The number of bytes that matched this rule since the last reset of the counters. |
| 1.3.6.1.4.1.2021.13.1.1.12 | ColumnipFwAccPackets | read-only | mandatory | The number of packets that matched this rule since the last reset of the counters. |
| 1.3.6.1.4.1.2021.13.1.1.13 | ColumnipFwAccNrSrcPorts | read-only | mandatory | The number of ports that refer to the source address. |
| 1.3.6.1.4.1.2021.13.1.1.14 | ColumnipFwAccNrDstPorts | read-only | mandatory | The number of ports that refer to the destination address. |
| 1.3.6.1.4.1.2021.13.1.1.15 | ColumnipFwAccSrcIsRange | read-only | mandatory | Interpret the first two ports of the source part as the upper and lower limit of an interval or not. |
| 1.3.6.1.4.1.2021.13.1.1.16 | ColumnipFwAccDstIsRange | read-only | mandatory | Interpret the first two ports of the destination part as the upper and lower limit of an interval or not. |
| 1.3.6.1.4.1.2021.13.1.1.17 | ColumnipFwAccPort1 | read-only | mandatory | Port number 1. |
| 1.3.6.1.4.1.2021.13.1.1.18 | ColumnipFwAccPort2 | read-only | mandatory | Port number 2. |
| 1.3.6.1.4.1.2021.13.1.1.19 | ColumnipFwAccPort3 | read-only | mandatory | Port number 3. |
| 1.3.6.1.4.1.2021.13.1.1.20 | ColumnipFwAccPort4 | read-only | mandatory | Port number 4. |
| 1.3.6.1.4.1.2021.13.1.1.21 | ColumnipFwAccPort5 | read-only | mandatory | Port number 5. |
| 1.3.6.1.4.1.2021.13.1.1.22 | ColumnipFwAccPort6 | read-only | mandatory | Port number 6. |
| 1.3.6.1.4.1.2021.13.1.1.23 | ColumnipFwAccPort7 | read-only | mandatory | Port number 7. |
| 1.3.6.1.4.1.2021.13.1.1.24 | ColumnipFwAccPort8 | read-only | mandatory | Port number 8. |
| 1.3.6.1.4.1.2021.13.1.1.25 | ColumnipFwAccPort9 | read-only | mandatory | Port number 9. |
| 1.3.6.1.4.1.2021.13.1.1.26 | ColumnipFwAccPort10 | read-only | mandatory | Port number 10. |