IPPM-REPORTING-MIB
131 objects
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in TCP/IP-based internets. In particular, it specifies the objects used for managing the results of the IPPM metrics measurements, alarms and reporting of measurement results.
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 zeroDotZero |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1 | Identityippm | This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in TCP/IP-based internets. In particular, it spe… | ||
| 1.3.6.1.2.1.0 | NodeippmNotifications | |||
| 1.3.6.1.2.1.0.1 | NotificationippmAggrMeasureReport | current | A notification sent because the value of the measure is under the high threshold value and greater than the low threshold value. The notification contains the … | |
| 1.3.6.1.2.1.0.2 | NotificationippmAggrMeasureHistoryFull | current | A notification sent when the size of the history of a metric of a aggregated measure exceeds ippmAggrMeasureHistorySize. The agent will then manage the reports… | |
| 1.3.6.1.2.1.0.3 | NotificationippmNetMeasureHistoryFull | current | A notification sent when the size of the history of a metric of a network measure exceeded ippmNetMeasureHistorySize. Then the agent manages the records accord… | |
| 1.3.6.1.2.1.1 | NodeippmMibObjects | |||
| 1.3.6.1.2.1.1.1 | NodeippmSystem | |||
| 1.3.6.1.2.1.1.1.1 | ScalarippmSystemTime | read-only | current | The current time of the system running the IPPM REPORTING MIB SNMP agent. When the agent is running in proxy mode, it is the current time of the proxy agent. W… |
| 1.3.6.1.2.1.1.1.2 | ScalarippmSystemSynchronizationType | read-only | current | ippmSystemSynchronizationType describes the mechanism used to synchronize the system running the IPPM REPORTING MIB SNMP agent. Other(0) The synchronization pr… |
| 1.3.6.1.2.1.1.1.3 | ScalarippmSystemSynchronizationDesc | read-only | current | The description of the synchronization process of the system running the IPPM REPORTING MIB SNMP agent. |
| 1.3.6.1.2.1.1.1.4 | ScalarippmSystemClockResolution | read-only | current | ippmSystemClockResolution provides the precision of the clock used for the measures . The unit is the nanosecond. For example, the clock on an old Unix host mi… |
| 1.3.6.1.2.1.1.1.5 | ScalarippmSystemOperationalStatus | read-only | current | This object describes the status of the system running the IPPM REPORTING MIB SNMP agent. It does not describe end point measurement status: unknown(0) means t… |
| 1.3.6.1.2.1.1.1.6 | ScalarippmSystemAggregatedMetrics | read-only | current | ippmSystemAggregatedMetrics lists the aggregated metrics that are performed in the SNMP agent instead of in the point of measure. |
| 1.3.6.1.2.1.1.1.7 | TableippmSynchronizationTable | not-accessible | current | This table registers the event related to the synchronization of the points of measure. Each event is described in an ippmSynchronizationEntry. ippmSynchroniza… |
| 1.3.6.1.2.1.1.1.7.1 | RowippmSynchronizationEntry | not-accessible | current | An entry describes a modification of the synchronization status. |
| 1.3.6.1.2.1.1.1.7.1.1 | ColumnippmSynchronizationIndex | not-accessible | current | An index that identifies the synchronization events in chronological order. 65535 is an arbitrary size. It is not recommended to keep permanently a history of … |
| 1.3.6.1.2.1.1.1.7.1.2 | ColumnippmSynchronizationTime | read-only | current | The time when the synchronization event occurs. |
| 1.3.6.1.2.1.1.1.7.1.3 | ColumnippmSynchronizationStratum | read-only | current | The stratum level of the clock computed when the synchronization event occurs. |
| 1.3.6.1.2.1.1.1.7.1.4 | ColumnippmSynchronizationResolution | read-only | current | The new time resolution computed after the synchronization event occurred. |
| 1.3.6.1.2.1.1.1.8 | TableippmPointOfMeasureTable | not-accessible | current | This table is the list of measurement end points available in the measurement system. Proxy mode: It is the list of the measurement end points of the set of pr… |
| 1.3.6.1.2.1.1.1.8.1 | RowippmPointOfMeasureEntry | not-accessible | current | An entry may be the management address of some middleware in charge of the management of a set of probes. It may the management address of a probe that contain… |
| 1.3.6.1.2.1.1.1.8.1.1 | ColumnippmPointOfMeasureIndex | not-accessible | current | A local index that identifies an entry in the point of measure table. |
| 1.3.6.1.2.1.1.1.8.1.2 | ColumnippmPointOfMeasureMgmtAddrType | read-only | current | The address type associated with the management address. |
| 1.3.6.1.2.1.1.1.8.1.3 | ColumnippmPointOfMeasureMgmtAddress | read-only | current | The management address on the point of measure |
| 1.3.6.1.2.1.1.1.8.1.4 | ColumnippmPointOfMeasureTestAddrType | read-only | current | Defines the address type of the measurement interface of the point of measure. |
| 1.3.6.1.2.1.1.1.8.1.5 | ColumnippmPointOfMeasureTestAddress | read-only | current | Specifies the address of the measurement interface for the point of measure. |
| 1.3.6.1.2.1.1.1.8.1.6 | ColumnippmPointOfMeasureMetrics | read-only | current | ippmPointOfMeasureMetrics lists the metrics this point of measure implements. |
| 1.3.6.1.2.1.1.1.9 | TableippmMetricsTable | not-accessible | current | This table is mandatory. It describes the current implementation. Each IPPM standardized metric must be described in the table. ippmMetricsTable content is rea… |
| 1.3.6.1.2.1.1.1.9.1 | RowippmMetricsEntry | not-accessible | current | An entry describes the static capabilities of a metric implementation. |
| 1.3.6.1.2.1.1.1.9.1.1 | ColumnippmMetricsIndex | not-accessible | current | ippmMetricsIndex defines an unambiguous index for each standardized metric. It identifies a metric, and as such its value is the value of the node of the metri… |
| 1.3.6.1.2.1.1.1.9.1.2 | ColumnippmMetricsType | read-only | current | Indicates the metric type, whether it is network or aggregated. |
| 1.3.6.1.2.1.1.1.9.1.3 | ColumnippmMetricsUnit | read-only | current | The unit used in the current entity for the results of the measurement of this metric. |
| 1.3.6.1.2.1.1.1.9.1.4 | ColumnippmMetricsDescription | read-only | current | A textual description of the metric implementation following the exact name of this metric in the registry. For example: oneWayDelay: OWD Metric . |
| 1.3.6.1.2.1.1.2 | NodeippmOwners | |||
| 1.3.6.1.2.1.1.2.1 | TableippmOwnersTable | not-accessible | current | A management entity wishing to access or aggregate remote Ippm measurements in an agent must previously be registered in the ippmOwnersTable. This table is rea… |
| 1.3.6.1.2.1.1.2.1.1 | RowippmOwnersEntry | not-accessible | current | The description of the resources granted to an SNMP application. For example, an instance of ippmOwnersOwner with an IppmOwnerString 'acme', which represents t… |
| 1.3.6.1.2.1.1.2.1.1.1 | ColumnippmOwnersOwner | not-accessible | current | The owner described by this entry. |
| 1.3.6.1.2.1.1.2.1.1.2 | ColumnippmOwnersGrantedMetrics | read-create | current | Defines the metrics granted to an owner for which measurements can be performed. |
| 1.3.6.1.2.1.1.2.1.1.3 | ColumnippmOwnersQuota | read-create | current | The maximum number of records that this owner may have in the history table and in the report table. |
| 1.3.6.1.2.1.1.2.1.1.4 | ColumnippmOwnersIpAddressType | read-create | current | The IP address type of the management entity corresponding to this owner. InetAddressType is restricted to ipv4(1),ipv6(2)and dns(16). |
| 1.3.6.1.2.1.1.2.1.1.5 | ColumnippmOwnersIpAddress | read-create | current | The IP address of the management entity corresponding to this owner. For example, the IP address of the management console used to send SNMP requests. |
| 1.3.6.1.2.1.1.2.1.1.6 | ColumnippmOwnersEmail | read-create | current | The email address of the management entity corresponding to this owner. |
| 1.3.6.1.2.1.1.2.1.1.7 | ColumnippmOwnersStatus | read-create | current | The status of this table entry. Once this status is set to active, the corresponding entry in the table may not be modified. |
| 1.3.6.1.2.1.1.3 | NodeippmHistory | |||
| 1.3.6.1.2.1.1.3.1 | TableippmHistoryTable | not-accessible | current | The table containing the measurement results. |
| 1.3.6.1.2.1.1.3.1.1 | RowippmHistoryEntry | not-accessible | current | An ippmHistoryEntry entry is one of the results of a measure identified by ippmHistoryMeasureOwner, ippmHistoryMeasureIndex, ippmHistoryMetricIndex and ippmHis… |
| 1.3.6.1.2.1.1.3.1.1.1 | ColumnippmHistoryMeasureOwner | not-accessible | current | The owner of the measure that produced this result. The measure is either an ippmNetMeasure or an ippmAggrMeasure. |
| 1.3.6.1.2.1.1.3.1.1.2 | ColumnippmHistoryMeasureIndex | not-accessible | current | The owner index of the measure that produced this result. The measure is either an entry of the ippmNetMeasureTable or of the ippmAggrMeasureTable. |
| 1.3.6.1.2.1.1.3.1.1.3 | ColumnippmHistoryMetricIndex | not-accessible | current | ippmHistoryMetricIndex identifies the metric measured by the measure. The metric is described in the corresponding entry of the ippmMetricsTable. |
| 1.3.6.1.2.1.1.3.1.1.4 | ColumnippmHistorySequence | not-accessible | current | ippmHistorySequence is the sequence number of the measurement results for a metric. Network metrics: It's the sequence number of a measurement packet. Typicall… |
| 1.3.6.1.2.1.1.3.1.1.5 | ColumnippmHistoryTimestamp | read-only | current | The timestamp when the measurement occurred. |
| 1.3.6.1.2.1.1.3.1.1.6 | ColumnippmHistoryValue | read-only | current | The observed value of the measurement. |
| 1.3.6.1.2.1.1.3.2 | ScalarippmHistoryPathToResults | read-only | current | It is typically an URL describing the file location where bulk results are logged. |
| 1.3.6.1.2.1.1.4 | NodeippmNetMeasure | |||
| 1.3.6.1.2.1.1.4.1 | TableippmNetMeasureTable | not-accessible | current | An entry is a measurement that performs network measures and provides results. It performs several metric measurements per packet exchange. Each step of a meas… |
| 1.3.6.1.2.1.1.4.1.1 | RowippmNetMeasureEntry | not-accessible | current | The IppmNetMeasureTable is mandatory, and its content is read only. It means that the measurement software handles the table internally. The setup of the netwo… |
| 1.3.6.1.2.1.1.4.1.1.1 | ColumnippmNetMeasureOwner | not-accessible | current | The owner of the network measure. |
| 1.3.6.1.2.1.1.4.1.1.2 | ColumnippmNetMeasureIndex | not-accessible | current | The owner index of the network measure. |
| 1.3.6.1.2.1.1.4.1.1.3 | ColumnippmNetMeasureName | read-create | current | The name of the metric instance(s) as defined in ippmNetMeasureMetrics. It illustrates the specificity of the metric(s) and includes the metric(s) and the Pack… |
| 1.3.6.1.2.1.1.4.1.1.4 | ColumnippmNetMeasureMetrics | read-create | current | ippmNetMeasureMetrics defines the metrics to compute within this measure. Only network metrics of the same type are allowed in this field (e.g. poisson-based m… |
| 1.3.6.1.2.1.1.4.1.1.5 | ColumnippmNetMeasureBeginTime | read-create | current | Specifies the time at which the measurement begins. |
| 1.3.6.1.2.1.1.4.1.1.6 | ColumnippmNetMeasureCollectionRateUnit | read-create | current | Specifies the unit of the measurement period. |
| 1.3.6.1.2.1.1.4.1.1.7 | ColumnippmNetMeasureCollectionRate | read-create | current | Gives the period used to collect singletons from the point of measures. This value is used as the cycle period in the report. |
| 1.3.6.1.2.1.1.4.1.1.8 | ColumnippmNetMeasureDurationUnit | read-create | current | Specifies the measurement duration unit. |
| 1.3.6.1.2.1.1.4.1.1.9 | ColumnippmNetMeasureDuration | read-create | current | Specifies the measurement duration. |
| 1.3.6.1.2.1.1.4.1.1.10 | ColumnippmNetMeasureHistorySize | read-create | current | Specifies the maximum number of results saved for each metric of this measure. Overflow condition will be managed by the object ippmNetMeasureResultsMgmt. |
| 1.3.6.1.2.1.1.4.1.1.11 | ColumnippmNetMeasureFailureMgmtMode | read-create | current | This object defines whether this row (and the measure controlled by this row) is restarted automatically, manually, or discarded upon failure, or reboot of the… |
| 1.3.6.1.2.1.1.4.1.1.12 | ColumnippmNetMeasureResultsMgmt | read-create | current | Action to take when the log is full. The measurement system owner may choose to either wrap, in which case the agent writes over existing records. The user may… |
| 1.3.6.1.2.1.1.4.1.1.13 | ColumnippmNetMeasureSrcPacketType | read-create | current | Defines the type P of the source address of the packets sent by the measure. |
| 1.3.6.1.2.1.1.4.1.1.14 | ColumnippmNetMeasureSrc | read-create | current | Specifies the address of the source of the measure. It is represented as a list of parameters corresponding to those of the PROTOCOL IDENTIFIER set in ippmNetM… |
| 1.3.6.1.2.1.1.4.1.1.15 | ColumnippmNetMeasureDstPacketType | read-create | current | Defines the type P of the destination address of the packets sent by the measure. |
| 1.3.6.1.2.1.1.4.1.1.16 | ColumnippmNetMeasureDst | read-create | current | Specifies the address of the destination of the measure. It is represented as a list of parameters corresponding to those of the PROTOCOL IDENTIFIER set in ipp… |
| 1.3.6.1.2.1.1.4.1.1.17 | ColumnippmNetMeasureTxMode | read-create | current | The transmit mode used to send the packets: 'other' The rule used to send the packets is unknown. 'periodic' Packets are sent periodically at ippmNetMeasureTxP… |
| 1.3.6.1.2.1.1.4.1.1.18 | ColumnippmNetMeasureTxPacketRateUnit | read-create | current | The packet rate unit used to send the packets. |
| 1.3.6.1.2.1.1.4.1.1.19 | ColumnippmNetMeasureTxPacketRate | read-create | current | The rate the packets are sent. |
| 1.3.6.1.2.1.1.4.1.1.20 | ColumnippmNetMeasureMedOrBurstSize | read-create | current | Multi-burst mode: This field represents the burst size in number of packets. Poisson mode: This field indicates the number of packets sent, on average, during … |
| 1.3.6.1.2.1.1.4.1.1.21 | ColumnippmNetMeasureDevOrIntBurstSize | read-create | current | Multi-burst mode: This field indicates the gap between 2 bursts, in number of packets. Example: If TxPacketRateUnit/TxPacketRate is 100 packets/second, and Dev… |
| 1.3.6.1.2.1.1.4.1.1.22 | ColumnippmNetMeasureLossTimeout | read-create | current | Specifies the delay after which the packet is considered lost by the sink. |
| 1.3.6.1.2.1.1.4.1.1.23 | ColumnippmNetMeasureL3PacketSize | read-create | current | Specifies the size of the packets counted at the IP network layer in regards to the PacketType definition. Example: For a PacketType 'ip ipip4' the L3 size wil… |
| 1.3.6.1.2.1.1.4.1.1.24 | ColumnippmNetMeasureDataPattern | read-create | current | The pattern used to fill the payload of the packet. |
| 1.3.6.1.2.1.1.4.1.1.25 | ColumnippmNetMeasureTotalPktsRecv | read-only | current | Reports the current number of packets received since the beginning of the measure. This parameters is useful to monitor the measure and it is needed to compute… |
| 1.3.6.1.2.1.1.4.1.1.26 | ColumnippmNetMeasureLastUpdate | read-only | current | The time when the last aggregation was computed. |
| 1.3.6.1.2.1.1.4.1.1.27 | ColumnippmNetMeasureOperState | read-only | current | Reports the operational status of the network measure. |
| 1.3.6.1.2.1.1.5 | NodeippmAggrMeasure | |||
| 1.3.6.1.2.1.1.5.1 | TableippmAggrMeasureTable | not-accessible | current | An aggregated measure summarizes the results of previous network or aggregated measures. The results are saved in the ippmHistoryTable. Each step of the calcul… |
| 1.3.6.1.2.1.1.5.1.1 | RowippmAggrMeasureEntry | not-accessible | current | Typically, the configuration operation creates and sets the value of the fields of a new ippmAggrMeasureEntry. ippmAggrMeasureOwner and ippmAggrMeasureIndex id… |
| 1.3.6.1.2.1.1.5.1.1.1 | ColumnippmAggrMeasureOwner | not-accessible | current | The owner who has configured this entry. |
| 1.3.6.1.2.1.1.5.1.1.2 | ColumnippmAggrMeasureIndex | not-accessible | current | The index of the aggregated measure. The value is managed by the owner. |
| 1.3.6.1.2.1.1.5.1.1.3 | ColumnippmAggrMeasureName | read-create | current | The name of the instance of the metric. It illustrates the specificity of the metric and includes the metric and the typeP. example: IP-port-HTTP-connectivity:… |
| 1.3.6.1.2.1.1.5.1.1.4 | ColumnippmAggrMeasureMetrics | read-create | current | ippmAggrMeasureMetrics defines the metrics to compute within this aggregated measure. Only aggregated metrics of the same type are allowed in this field (e.g. … |
| 1.3.6.1.2.1.1.5.1.1.5 | ColumnippmAggrMeasureHistoryOwner | read-create | current | The owner of the measure to summarize. |
| 1.3.6.1.2.1.1.5.1.1.6 | ColumnippmAggrMeasureHistoryIndex | read-create | current | The owner index of the measure to summarize. |
| 1.3.6.1.2.1.1.5.1.1.7 | ColumnippmAggrMeasureHistoryMetric | read-create | current | The metric of the measure to summarize. |
| 1.3.6.1.2.1.1.5.1.1.8 | ColumnippmAggrMeasureFilter | read-create | current | ippmAggrMeasureFilter defines the kind of filter to apply on a result to determine if the result is stored or not. The parameters of the filter are ippmAggrMea… |
| 1.3.6.1.2.1.1.5.1.1.9 | ColumnippmAggrMeasureLowThreshold | read-create | current | An event is generated when the result of the measure of the metric is lower that the value of ippmAggrMeasureLowThreshold. The threshold has the same unit as t… |
| 1.3.6.1.2.1.1.5.1.1.10 | ColumnippmAggrMeasureHighThreshold | read-create | current | An event is generated when the result of the measure of the metric exceeds the value of ippmAggrMeasureHighThreshold. The threshold has the same unit as the me… |
| 1.3.6.1.2.1.1.5.1.1.11 | ColumnippmAggrMeasureBeginTime | read-create | current | Specifies the time at which the aggregated measure starts. |
| 1.3.6.1.2.1.1.5.1.1.12 | ColumnippmAggrMeasureAggrPeriodUnit | read-create | current | Specifies the unit of the aggregated measure period. |
| 1.3.6.1.2.1.1.5.1.1.13 | ColumnippmAggrMeasureAggrPeriod | read-create | current | Specifies the amount of time between 2 measurement action intervals. The action is specific to the semantic of the measure. Network metrics: The ippmNetMeasure… |
| 1.3.6.1.2.1.1.5.1.1.14 | ColumnippmAggrMeasureDurationUnit | read-create | current | Specifies the unit of the measure duration. |
| 1.3.6.1.2.1.1.5.1.1.15 | ColumnippmAggrMeasureDuration | read-create | current | Specifies the duration of the measure. |
| 1.3.6.1.2.1.1.5.1.1.16 | ColumnippmAggrMeasureHistorySize | read-create | current | Specifies the maximum number of results saved for each metric of this measure. Overflow condition will be managed by the object ippmAggrMeasureResultsMgmt. |
| 1.3.6.1.2.1.1.5.1.1.17 | ColumnippmAggrMeasureStorageType | read-create | current | This object defines whether this row and the measure controlled by this row are kept in volatile storage and lost upon reboot or if this row is backed up by no… |
| 1.3.6.1.2.1.1.5.1.1.18 | ColumnippmAggrMeasureResultsMgmt | read-only | current | This object displays the way the history of the aggregated measure is managed. 'wrap' continue the measure and erase the older entries in the history. 'suspend… |
| 1.3.6.1.2.1.1.5.1.1.19 | ColumnippmAggrMeasureAdminState | read-create | current | This object controls the activity of the aggregated measure. 'start' The aggregated measure is started. 'stop' The aggregated measure is stopped. |
| 1.3.6.1.2.1.1.5.1.1.20 | ColumnippmAggrMeasureFastReport | read-create | current | A fast report is required in order to verify quickly that a measure is running well. 'fast report' feature is active if ippmAggrMeasureFastReport is not null a… |
| 1.3.6.1.2.1.1.5.1.1.21 | ColumnippmAggrMeasureLastUpdate | read-only | current | The time when the last aggregated measure was computed. |
| 1.3.6.1.2.1.1.5.1.1.22 | ColumnippmAggrMeasureOperState | read-only | current | Reports the operational status of the aggregated measure. |
| 1.3.6.1.2.1.1.5.1.1.23 | ColumnippmAggrMeasureNbPktsTreated | read-only | current | Reports the current number of packets used to calculate the aggregation since the start of the measure. This parameters is useful to monitor the measure and it… |
| 1.3.6.1.2.1.1.5.1.1.24 | ColumnippmAggrMeasureStatus | read-create | current | The status of this entry. Once the entry status is set to active, the associate entry cannot be modified. |
| 1.3.6.1.2.1.2 | NodeippmConformance | |||
| 1.3.6.1.2.1.2.1 | NodeippmCompliances | |||
| 1.3.6.1.2.1.2.1.1 | ComplianceippmProxyInterDomainCompliances | read-only | current | The compliance statement for SNMP entities which implement the IPPM MIB as a proxy in interdomain. The implementation of the VACM control is mandatory. |
| 1.3.6.1.2.1.2.1.2 | ComplianceippmProxyCompliance | read-only | current | The compliance statement for SNMP entities which implement the IPPM MIB as a proxy. |
| 1.3.6.1.2.1.2.1.3 | ComplianceippmEmbeddedCompliance | current | The compliance statement for SNMP entities which implement the IPPM MIB in a probe. | |
| 1.3.6.1.2.1.2.2 | NodeippmGroups | |||
| 1.3.6.1.2.1.2.2.1 | GroupippmSystemGroup | current | The IPPM System Group | |
| 1.3.6.1.2.1.2.2.2 | GroupippmNetMeasureGroup | current | The IPPM Network Measure Group | |
| 1.3.6.1.2.1.2.2.3 | GroupippmHistoryGroup | current | The IPPM History Group | |
| 1.3.6.1.2.1.2.2.4 | GroupippmAggrMeasureGroup | current | The IPPM AggregatedMeasure Group | |
| 1.3.6.1.2.1.2.2.5 | GroupippmOwnersGroup | current | The IPPM Owners Group | |
| 1.3.6.1.2.1.2.2.6 | GroupippmNotificationGroup | current | The IPPM Notification Group |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| GMTTimeStamp | OCTET STRING (SIZE (8)) | current | The time value at which a measure or an event took place. field octets contents range 1 1-4 second since 1 Jan 1900 0H00* 0..2^31 - 1 2 5-8 fractional part of the second* 0..2^32 - 1 * the value is in network-byte order… |
| IppmMetricResultFilter | INTEGER { logInBandValue(1), logOutBandValue(2), logAboveValue(3), logBelowValue(4), logUpAndDownValue(5) } | current | Given that not all results from a metric measurement are pertinent, and that the size of the history must be limited whenever possible, the TC IppmMetricResultFilter defines basic filters to limit the among of data coll… |
| IppmMetricsRegistryIndex | Unsigned32 (1.. 65535) | current | IppmMetricsRegistryIndex defines an unambiguous index for each standardized metric. It identifies a metric, and as such its value is the value of the node of the metric in the IPPM registry. This value is the same in an… |
| IppmOwnerIndex | Unsigned32 (1.. 65535) | current | The owner namespace is defined in the INDEX of a table as a couple of 2 objects where the type of first one is IppmOwnerString and the type of the second is IppmOwnerIndex. An object of type IppmOwnerIndex uniquely iden… |
| IppmOwnerString | OCTET STRING (SIZE (0..32)) | current | The owner namespace is defined in the INDEX of a table as a couple of 2 objects where the type of the first one is IppmOwnerString and the type of the second is IppmOwnerIndex. IppmOwnerString is an OwnerString which le… |
| IppmStandardMetrics | OCTET STRING (SIZE (1..64)) | current | Each standard metric is identified in the IPPM-METRICS- REGISTRY under the node rfc in chronological order. In order to allow for several metrics to be calculated in a single measure, there is a need to describe in a bi… |
| PacketType | OCTET STRING (SIZE (0..512)) | current | This textual convention is a display string used to describe the protocol encapsulation list of a packet, and is used as the value of the SYNTAX clause for the type of the Src and Dst of an IPPM measure. The RFC2895 spe… |
| PacketTypeAddress | OCTET STRING (SIZE (0..512)) | current | This textual convention is a Display string used to describe the parameters of the protocol encapsulation list of a packet, basically the address. PacketTypeAddress is defined as a display string. It consists in a list … |
| TimeUnit | INTEGER { week(1), day(2), hour(3), minute(4), second(5), millisecond(6), microsecond(7), nanosecond(8) } | current | A enumerated list of time units. |