ISD2-MIB
54 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter |
| SCANET-MIB | scanet |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.208.48 | Nodeisd2 | |||
| 1.3.6.1.4.1.208.48.1 | Nodeisd2SigChan | |||
| 1.3.6.1.4.1.208.48.1.1 | Tableisd2SigChanTable | not-accessible | mandatory | Table containing configuration and operational parameters for all ISDN Signalling Channels on this managed device. |
| 1.3.6.1.4.1.208.48.1.1.1 | Rowisd2SigChanEntry | not-accessible | mandatory | An entry in the ISDN Signalling Channel Table. |
| 1.3.6.1.4.1.208.48.1.1.1.1 | Columnisd2SigChanIfIndex | read-only | mandatory | Interface index for this signalling channel. |
| 1.3.6.1.4.1.208.48.1.1.1.2 | Columnisd2SigChanL2State | read-only | mandatory | Signalling layer-2 state (Q.921). |
| 1.3.6.1.4.1.208.48.1.1.1.3 | Columnisd2SigChanCES | read-only | mandatory | Connection Endpoint Suffix (CES) for this signalling channel. |
| 1.3.6.1.4.1.208.48.1.1.1.4 | Columnisd2SigChanSAPI | read-only | mandatory | Service Access Point Identifier (SAPI) for this signalling channel |
| 1.3.6.1.4.1.208.48.1.1.1.5 | Columnisd2SigChanCallCollisions | read-only | mandatory | The number of calls over this signalling channel which failed because of collision. |
| 1.3.6.1.4.1.208.48.1.1.1.6 | Columnisd2SigChanAddressCheckFails | read-only | mandatory | The number of incoming calls over this signalling channel which were refused because of address mismatch. |
| 1.3.6.1.4.1.208.48.2 | Nodeisd2Dchan | |||
| 1.3.6.1.4.1.208.48.2.1 | Tableisd2DchanTable | not-accessible | mandatory | Table containing statistics for all ISDN D-Channels on this managed device. |
| 1.3.6.1.4.1.208.48.2.1.1 | Rowisd2DchanEntry | not-accessible | mandatory | An entry in the ISDN D-Channel Table. |
| 1.3.6.1.4.1.208.48.2.1.1.1 | Columnisd2DchanIfIndex | read-only | mandatory | The Ifindex of this D-channel. |
| 1.3.6.1.4.1.208.48.2.1.1.2 | Columnisd2DchanRxShort | read-only | mandatory | The number of frames received which were discarded due to the frame length being too short. |
| 1.3.6.1.4.1.208.48.2.1.1.3 | Columnisd2DchanRxLong | read-only | mandatory | The number of frames received which were discarded due to the frame length being too long. |
| 1.3.6.1.4.1.208.48.2.1.1.4 | Columnisd2DchanRxCRCerror | read-only | mandatory | The number of frames received which were discarded due to Cyclic Redundancy Check (CRC) errors. This figure indicates the number of bit errors occuring over th… |
| 1.3.6.1.4.1.208.48.2.1.1.5 | Columnisd2DchanRxResidual | read-only | mandatory | The number of times the frame contained residual bits. This should not occur. |
| 1.3.6.1.4.1.208.48.2.1.1.6 | Columnisd2DchanRxAborts | read-only | mandatory | The number of times the High-Level Data Link Control (HDLC) 'Abort' signal was received, indicating that the received packet should be ignored. |
| 1.3.6.1.4.1.208.48.2.1.1.7 | Columnisd2DchanRxOverrun | read-only | mandatory | The number of frames which were lost due to bus overload within the router. This should not occur. |
| 1.3.6.1.4.1.208.48.2.1.1.8 | Columnisd2DchanRxLostSync | read-only | mandatory | The number of frames which were lost due to drop of signal on the line. |
| 1.3.6.1.4.1.208.48.2.1.1.9 | Columnisd2DchanRxBufferLack | read-only | mandatory | The number of received frames which were lost due to RAM (buffer) overload within the router. |
| 1.3.6.1.4.1.208.48.2.1.1.10 | Columnisd2DchanRxApplnotready | read-only | mandatory | The number of received frames which were discarded since there was a temporary situation with no upper layer to receive the frame. |
| 1.3.6.1.4.1.208.48.2.1.1.11 | Columnisd2DchanRxUnknownProto | read-only | mandatory | The number of incoming frames which were discarded due to unknown protocol field. |
| 1.3.6.1.4.1.208.48.2.1.1.12 | Columnisd2DchanTxDiscardedProto | read-only | mandatory | The number of protocol frames for transmission which were lost due to RAM (buffer) overload within the router. |
| 1.3.6.1.4.1.208.48.2.1.1.13 | Columnisd2DchanTxDiscardedData | read-only | mandatory | The number of data frames for transmission which were lost due to RAM (buffer) overload within the router. |
| 1.3.6.1.4.1.208.48.2.1.1.14 | Columnisd2DchanTxUnderrun | read-only | mandatory | The number of frames for transmission that were not successfully transmitted due to CPU (processor) overload within the router. |
| 1.3.6.1.4.1.208.48.2.1.1.15 | Columnisd2DchanTxCollision | read-only | mandatory | The number of outgoing frames which were discarded due to collisions that occured during transmission. |
| 1.3.6.1.4.1.208.48.3 | Nodeisd2Phys | |||
| 1.3.6.1.4.1.208.48.3.1 | Tableisd2PhysTable | not-accessible | mandatory | Table containing physical layer status for all ISDN ports on this managed device. |
| 1.3.6.1.4.1.208.48.3.1.1 | Rowisd2PhysEntry | not-accessible | mandatory | An entry in the ISDN physical layer Table. |
| 1.3.6.1.4.1.208.48.3.1.1.1 | Columnisd2PhysIfIndex | read-only | mandatory | IfIndex for this ISDN port. |
| 1.3.6.1.4.1.208.48.3.1.1.2 | Columnisd2PhysL1State | read-only | mandatory | Physical layer state for this ISDN port. |
| 1.3.6.1.4.1.208.48.3.1.1.3 | Columnisd2PhysL1Alarm | read-only | mandatory | Primary Rate Interface alarm for this ISDN port. This entry is unused for BRI. 0 means noDetectedProblem |
| 1.3.6.1.4.1.208.48.4 | Nodeisd2CallCtrl | |||
| 1.3.6.1.4.1.208.48.4.1 | Tableisd2CallCtrlTable | not-accessible | mandatory | Table containing configuration and operational parameters for all ISDN links on this managed device. |
| 1.3.6.1.4.1.208.48.4.1.1 | Rowisd2CallCtrlEntry | not-accessible | mandatory | An entry in the ISDN link Table. |
| 1.3.6.1.4.1.208.48.4.1.1.1 | Columnisd2CallCtrlSigchanIfIndex | read-only | mandatory | Interface index for the current signalling-channel associated with this link. The index is zero if no signalling-channel is associated. |
| 1.3.6.1.4.1.208.48.4.1.1.2 | Columnisd2CallCtrlBchanIfIndex | read-only | mandatory | Interface index for the current B-channel associated with this link. The index is zero if no B-channel is allocated. |
| 1.3.6.1.4.1.208.48.4.1.1.3 | Columnisd2CallCtrlLocalNumber | read-only | mandatory | The local ISDN number for this link. |
| 1.3.6.1.4.1.208.48.4.1.1.4 | Columnisd2CallCtrlLocalSubaddr | read-only | mandatory | The local ISDN subaddress for this link. |
| 1.3.6.1.4.1.208.48.4.1.1.5 | Columnisd2CallCtrlRemoteNumber | read-only | mandatory | The ISDN number the current or last call is or was connected to. |
| 1.3.6.1.4.1.208.48.4.1.1.6 | Columnisd2CallCtrlRemoteSubaddr | read-only | mandatory | The ISDN subaddress the current or last call is or was connected to. |
| 1.3.6.1.4.1.208.48.4.1.1.7 | Columnisd2CallCtrlL3State | read-only | mandatory | Signalling layer-3 state (Q.931 and custom). 0 means nullState. |
| 1.3.6.1.4.1.208.48.4.1.1.8 | Columnisd2CallCtrlCallRef | read-only | mandatory | Signalling layer-3 call reference (Q.931). |
| 1.3.6.1.4.1.208.48.4.1.1.9 | Columnisd2CallCtrlChannelNum | read-only | mandatory | The current B-channel number associated with this link. |
| 1.3.6.1.4.1.208.48.4.1.1.10 | Columnisd2CallCtrlOutCallsConnected | read-only | mandatory | The number of outgoing calls on this link which were actually connected. |
| 1.3.6.1.4.1.208.48.4.1.1.11 | Columnisd2CallCtrlOutCallsFailed | read-only | mandatory | The number of outgoing calls on this link which failed. |
| 1.3.6.1.4.1.208.48.4.1.1.12 | Columnisd2CallCtrlInCallsConnected | read-only | mandatory | The number of incoming calls on this link which were actually connected. |
| 1.3.6.1.4.1.208.48.4.1.1.13 | Columnisd2CallCtrlInCallsRefused | read-only | mandatory | The number of incoming calls on this link which were refused. |
| 1.3.6.1.4.1.208.48.4.1.1.14 | Columnisd2CallCtrlCallCollisions | read-only | mandatory | The number of calls on this link which failed because of collision. |
| 1.3.6.1.4.1.208.48.4.1.1.15 | Columnisd2CallCtrlCauseCode | read-only | mandatory | The encoded network cause value associated with the last call. This object will be updated whenever a call is started or cleared. The value of this object will… |
| 1.3.6.1.4.1.208.48.4.1.1.16 | Columnisd2CallCtrlLocationCode | read-only | mandatory | The encoded network cause location value associated with the last call. This object will be updated whenever a call is started or cleared. |
| 1.3.6.1.4.1.208.48.4.1.1.17 | Columnisd2CallCtrlCauseText | read-only | mandatory | ASCII text describing the reason for the last call termination. This object will be updated whenever a call is started or cleared. |