ISDN-OPT-MIB
99 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | enterprises |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.449 | Nodecodex | |||
| 1.3.6.1.4.1.449.2 | NodecdxProductSpecific | |||
| 1.3.6.1.4.1.449.2.1 | Nodecdx6500 | |||
| 1.3.6.1.4.1.449.2.1.2 | Nodecdx6500Configuration | |||
| 1.3.6.1.4.1.449.2.1.2.2 | Nodecdx6500CfgGeneralGroup | |||
| 1.3.6.1.4.1.449.2.1.2.2.19 | NodeisgIsdnCfgGroup | |||
| 1.3.6.1.4.1.449.2.1.2.2.19.1 | TableisgVGIsdnCfgChanTable | not-accessible | mandatory | This table contains ISDN Channel Configuration parameters. |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1 | TableisgVGIsdnCfgChanTableEntry | not-accessible | mandatory | An ISDN Channel Configuration Table Entry. |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.1 | RowisgVGIsdnCfgEntryNum | read-only | mandatory | This indicates the Channel Configuration Table Entry Number. |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.2 | RowisgVGIsdnCfgChanType | read-only | mandatory | ISDN Channel Type. |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.3 | RowisgVGIsdnCfgDChanPort | read-write | mandatory | The associated port for the ISDN D-channel. dchanzero : Both B channels have access type Permanent. No D Channel data. dchanone : Packet Data on D-channel (Por… |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.4 | RowisgVGIsdnCfgSwitchType | read-write | mandatory | Specifies switch type for the central office. bri1tr6Stype : German National ISDN. bri5essStype : AT&T switch briDms100Stype : DMS 100. briKddStype : Japanese … |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.5 | RowisgVGIsdnCfgDChanTEI | read-write | mandatory | The Terminal Endpoint Identifier value is provided by the service provider. The range for TEI is 0..63, 127, 255. If the Switch Type is configured as DMS-1, th… |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.6 | RowisgVGIsdnCfgDPckTraffic | read-write | mandatory | enable : Signalling and X.25 data over the D Channel. disable : Only signalling data over the D Channel. |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.7 | RowisgVGIsdnCfgDChanDN | read-write | mandatory | Local Subscriber Directory Number (DN) DN is provided by the ISDN service provider. |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.8 | RowisgVGIsdnCfgDSPID | read-write | mandatory | The Service Profile ID identifies the service profile and is provided by the ISDN service provider. |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.9 | RowisgVGIsdnCfgFirstBChanPort | read-write | mandatory | 0 : No call or TEI activity for the following objects prefixed by `isgVGIsdnCfgFirst' 1-3 : The associated port whose traffic will be on the ISDN B-channel whi… |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.10 | RowisgVGIsdnCfgFirstAccType | read-write | mandatory | perm : Dedicated (nailed-down) B-channel service. cmd : Dialed B-channel service: Circuit Mode. pmd : Dialed B-channel service: Packet Mode. cvl : Dialed B-cha… |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.11 | RowisgVGIsdnCfgFirstCallDisablSTm | read-only | mandatory | The Call Disable Start Time indicates whether ISDN calls will/will-not be blocked. This field is blank or displayed in the format `HHMM'. blank : ISDN calls wi… |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.12 | RowisgVGIsdnCfgFirstCallEnablSTm | read-only | mandatory | The Call Enable Start Time indicates whether ISDN calls will/will-not be blocked. This field is blank or displayed in the format `HHMM'. blank : ISDN calls wil… |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.13 | RowisgVGIsdnCfgFirstSPBU | read-write | mandatory | This port is configured to carry Same Port Backup (SPBU) feature. This feature requires the corresponding Port's Connection Type be SIMP. |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.14 | RowisgVGIsdnCfgFirstSPBUOpt | read-write | mandatory | Same Port Backup (SPBU) feature options This defines the switch back criteria for the backup ISDN line. NONE : No SPBU feature options. TIMEOUT : Based on a pr… |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.15 | RowisgVGIsdnCfgFirstSPBUTmOut | read-write | mandatory | Same Port Backup (SPBU) Timeout Counter. This defines the ISDN call duration time before a return to the leased line is attempted. This parameter is valid when… |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.16 | RowisgVGIsdnCfgFirstRate | read-write | mandatory | This parameter specifies the line speed for this channel. rate64k : No Adaptation rate128k : Bonded, no adaptation rate56k : Rate Adapted to 64K rate112k : Rat… |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.17 | RowisgVGIsdnCfgFirstTEI | read-write | mandatory | The value for the TEI (Terminal Endpoint Identifier). is provided by the service provider. The range is 0..63, 127, 255. Select 127 for automatic TEI negotiati… |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.18 | RowisgVGIsdnCfgFirstSPID | read-write | mandatory | The Service Profile ID identifies the service profile and is provided by the ISDN service provider. |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.19 | RowisgVGIsdnCfgFirstDN | read-write | mandatory | Local Subscriber Directory Number (DN) DN is provided by the ISDN service provider. |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.20 | RowisgVGIsdnCfgFirstSubAddr | read-write | mandatory | Outgoing call : This subaddress will be sent in the call setup message. Incoming call : This subaddress will be used for call verification if provided. |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.21 | RowisgVGIsdnCfgFirstOutDialNum1 | read-write | mandatory | The phone number to dial when establishing an ISDN outbound call. |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.22 | RowisgVGIsdnCfgFirstOutDialNum2 | read-write | mandatory | The phone number to dial if B1 Outbound Dial Number #1 is not available. Alternate attempts will be made between Number#1 and Number#2. |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.23 | RowisgVGIsdnCfgFirstDialRetryIntrvl | read-write | mandatory | The Dial Retry Timer defines the time (1 second interval) between ISDN dial attempts. The range is 0, 15-3600. The timer will be disabled by a configuration of… |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.24 | RowisgVGIsdnCfgFirstNumCallRetries | read-write | mandatory | The Dial Retry Counter specifies the number of times the ISDN will attempt calling at the Call Retry Interval. The value of 0 will allow unlimited number of at… |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.25 | RowisgVGIsdnCfgSecondChanPort | read-write | mandatory | 0 : No call or TEI activity for the following objects prefixed by `isgVGIsdnCfgSecond' 1-3 : The associated port whose traffic will be on the ISDN B-channel wh… |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.26 | RowisgVGIsdnCfgSecondAccType | read-write | mandatory | perm : Dedicated (nailed-down) B-channel service. cmd : Dialed B-channel service: Circuit Mode. pmd : Dialed B-channel service: Packet Mode. cvl : Dialed B-cha… |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.27 | RowisgVGIsdnCfgSecondCallDisablSTm | read-only | mandatory | The Call Disable Start Time indicates whether ISDN calls will/will-not be blocked. This field is blank or displayed in the format `HHMM'. blank : ISDN calls wi… |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.28 | RowisgVGIsdnCfgSecondCallEnablSTm | read-only | mandatory | The Call Enable Start Time indicates whether ISDN calls will/will-not be blocked. This field is blank or displayed in the format `HHMM'. blank : ISDN calls wil… |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.29 | RowisgVGIsdnCfgSecondSPBU | read-write | mandatory | This port is configured to carry Same Port Backup (SPBU) feature. This feature requires the corresponding Port's Connection Type be SIMP. |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.30 | RowisgVGIsdnCfgSecondSPBUOpt | read-write | mandatory | Same Port Backup (SPBU) feature options This defines the switch back criteria for the backup ISDN line. NONE : No SPBU feature options. TIMEOUT : Based on a pr… |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.31 | RowisgVGIsdnCfgSecondSPBUTmOut | read-write | mandatory | Same Port Backup (SPBU) Timeout Counter. This defines the ISDN call duration time before a return to the leased line is attempted. This parameter is valid when… |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.32 | RowisgVGIsdnCfgSecondRate | read-write | mandatory | This parameter specifies the line speed for this channel. rate64k : No Adaptation rate56k : Rate Adapted to 64K. |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.33 | RowisgVGIsdnCfgSecondTEI | read-write | mandatory | The value for the TEI (Terminal Endpoint Identifier). is provided by the service provider. The range is 0..63, 127, 255. Select 127 for automatic TEI negotiati… |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.34 | RowisgVGIsdnCfgSecondSPID | read-write | mandatory | The Service Profile ID identifies the service profile and is provided by the ISDN service provider. |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.35 | RowisgVGIsdnCfgSecondDN | read-write | mandatory | Local Subscriber Directory Number (DN) DN is provided by the ISDN service provider. |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.36 | RowisgVGIsdnCfgSecondSubAddr | read-write | mandatory | Outgoing call : This subaddress will be sent in the call setup message. Incoming call : This subaddress will be used for call verification if provided. |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.37 | RowisgVGIsdnCfgSecondOutDialNum1 | read-write | mandatory | The phone number to dial when establishing an ISDN outbound call. |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.38 | RowisgVGIsdnCfgSecondOutDialNum2 | read-write | mandatory | The phone number to dial if B1 Outbound Dial Number #1 is not available. Alternate attempts will be made between Number#1 and Number#2. |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.39 | RowisgVGIsdnCfgSecondDialRetryIntrvl | read-write | mandatory | The Dial Retry Timer defines the time (1 second interval) between ISDN dial attempts. The range is 0, 15-3600. The timer will be disabled by a configuration of… |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.40 | RowisgVGIsdnCfgSecondNumCallRetries | read-write | mandatory | The Dial Retry Counter specifies the number of times the ISDN will attempt calling at the Call Retry Interval. The value of 0 will allow unlimited number of at… |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.41 | RowisgVGIsdnCfgFirstPlainOldTelSet | read-write | mandatory | none: No Telephone support required pots1: Plain Old Telephone Set 1 connected |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.42 | RowisgVGIsdnCfgFirstCallPerm | read-write | mandatory | out - Initiates Call only, does not accept call inc - Accepts Call only, does not send call to network |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.43 | RowisgVGIsdnCfgFirstChSelect | read-write | mandatory | exclusive - implies channel requested will be fixed with the configured selection preferred - it will be up to the network to grant a channel for connection |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.44 | RowisgVGIsdnCfgSecondPlainOldTelSet | read-write | mandatory | none: No Telephone support required pots1: Plain Old Telephone Set 1 connected pots2: Plain Old Telephone Set 2 connected |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.45 | RowisgVGIsdnCfgSecondCallPerm | read-write | mandatory | out - Initiates Call only, does not accept call inc - Accepts Call only, does not send call to network |
| 1.3.6.1.4.1.449.2.1.2.2.19.1.1.46 | RowisgVGIsdnCfgSecondChSelect | read-write | mandatory | exclusive - implies channel requested will be fixed with the configured selection preferred - it will be up to the network to grant a channel for connection |
| 1.3.6.1.4.1.449.2.1.3 | Nodecdx6500Statistics | |||
| 1.3.6.1.4.1.449.2.1.3.2 | Nodecdx6500StatOtherStatsGroup | |||
| 1.3.6.1.4.1.449.2.1.3.2.9 | NodeisgIsdnStatsGroup | |||
| 1.3.6.1.4.1.449.2.1.3.2.9.1 | NodeisgVGIsdnStats | |||
| 1.3.6.1.4.1.449.2.1.3.2.9.1.1 | TableisgVGIsdnCCStatsTbl | not-accessible | mandatory | ISDN DSL Current Call Statistics Table. |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1 | RowisgVGIsdnCCStatsTblEntry | not-accessible | mandatory | Current Call Statistics Table Entries. |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.1 | ColumnisgVGIsdnCCStatsDSLNum | read-only | mandatory | Digital Service Loop Number. |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.2 | ColumnisgVGIsdnCCStatsChType | read-only | mandatory | ISDN Channel Type. |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.3 | ColumnisgVGIsdnCCStatsSwtchType | read-only | mandatory | Switch Type. bri1tr6Stype : German National ISDN. bri5essStype : AT&T switch briDms100Stype : DMS 100. briKddStype : Japanese International Access ISDN. briEts… |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.4 | ColumnisgVGIsdnCCStatsL1State | read-only | mandatory | Level1 State. l1Setup : Setup State. l1Active : Active State. l1Deactive : Inactive State. l1B1Loop : Loop Test State. l1B2Loop : Loop Test State. l1B1B2Loop :… |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.5 | ColumnisgVGIsdnCCStatsTEI | read-only | mandatory | Terminal Endpoint Identifier. |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.6 | ColumnisgVGIsdnCCStatsCallgAddr | read-only | mandatory | Current Call Statistics : Calling Address. |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.7 | ColumnisgVGIsdnCCStatsCalldAddr | read-only | mandatory | Current Call Statistics : Called Address. |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.8 | ColumnisgVGIsdnCCStatsSubaddr | read-only | mandatory | Current Call Statistics : Call Subaddress. |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.9 | ColumnisgVGIsdnCCStatsDirection | read-only | mandatory | Current Call Statistics : Call Direction. noCall : Channel is idle. outgoing : Call is coming from Vanguard into the ISDN network. incoming : Call is coming in… |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.10 | ColumnisgVGIsdnCCStatsAccType | read-only | mandatory | Current Call Statistics : Channel Access Type. permanent : Permanent B is selected. cktMode : Dialed B-channel service: Circuit Mode. pktMode : Dialed B-channe… |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.11 | ColumnisgVGIsdnCCStatsCallStatus | read-only | mandatory | Current Call Statistics : Call Status. waitInit : FIT waiting for SPID registration. initFail : FIT's SPID registration has failed. termIdle : Terminal is curr… |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.12 | ColumnisgVGIsdnCCStatsLineSpeed | read-only | mandatory | Current Call Statistics : Line Speed. rate64k : No Adaptation rate128k : Bonded, no adaptation rate56k : Rate Adapted to 64K rate112k : Rate Adapted to 12D8K. |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.13 | ColumnisgVGIsdnCCStatsPortConn | read-only | mandatory | Current Call Statistics : Port number to carry this call. |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.14 | ColumnisgVGIsdnCCStatsCauseCode | read-only | mandatory | Current Call Statistics : Cause Code sent/received in the Q.931 message. |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.15 | ColumnisgVGIsdnCCStatsCallStarted | read-only | mandatory | Current Call Statistics : Call Start Time. |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.16 | ColumnisgVGIsdnCCStatsDChanStatus | read-only | mandatory | enabled : D channel is enabled. disabled : D channel is disabled. |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.17 | ColumnisgVGIsdnCCStatsTrmStatus | read-only | mandatory | fitWaitInit : Fully Initializing Terminal (FIT) is waiting for SPID registration. fitFailed : FIT registration failed, check alarm for cause. fitTimeout : SPID… |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.18 | ColumnisgVGIsdnCCStatsTrmTei | read-only | mandatory | Terminal (B1/B2) TEI. |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.2 | TableisgVGIsdnCHStatsTbl | not-accessible | mandatory | ISDN DSL Call History Table. |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1 | RowisgVGIsdnCHStatsTblEntry | not-accessible | mandatory | ISDN DSL Call History Table Entries. |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1.1 | ColumnisgVGIsdnCHStatsDSLNum | read-only | mandatory | Digital Service Loop Number. |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1.2 | ColumnisgVGIsdnCHStatsChType | read-only | mandatory | ISDN Channel Type. |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1.3 | ColumnisgVGIsdnCHStatsSession | read-only | mandatory | Call Session Number tracked. 0 : Most Recent call. 1 : Previous call. 2 : Oldest call. |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1.4 | ColumnisgVGIsdnCHStatsNumCalld | read-only | mandatory | If the call is outgoing, this is the phone number that has been called. If the call is incoming, this is the number that is calling (provided the line has subs… |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1.5 | ColumnisgVGIsdnCHStatsDirection | read-only | mandatory | Direction of the call. noCall : Channel is idle. outgoing : Call is coming from Vanguard into the ISDN network. incoming : Call is coming into Vanguard from th… |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1.6 | ColumnisgVGIsdnCHStatsCauseCode | read-only | mandatory | Cause Code sent/received in the Q.931 message. |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1.7 | ColumnisgVGIsdnCHStatsLineSpeed | read-only | mandatory | Line Speed for the call. rate64k : No Adaptation rate56k : Rate Adapted to 64K rate0k : Rate Adapted to 0K. |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1.8 | ColumnisgVGIsdnCHStatsAsscPort | read-only | mandatory | Associated Port number to carry this call. |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1.9 | ColumnisgVGIsdnCHStatsStrtTm | read-only | mandatory | Call Start Time. |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1.10 | ColumnisgVGIsdnCHStatsEndTm | read-only | mandatory | Call End Time. |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.3 | TableisgVGIsdnPRICCStatsTbl | not-accessible | mandatory | ISDN PRI DSL Current Call Statistics Table. |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.3.1 | RowisgVGIsdnPRICCStatsTblEntry | not-accessible | mandatory | PRI Current Call Statistics Table Entries. |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.3.1.1 | ColumnisgVGIsdnPRICCStatsDSLNum | read-only | mandatory | Digital Service Loop Number. |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.3.1.2 | ColumnisgVGIsdnPRICCStatsSwtchType | read-only | mandatory | Switch Type. bri1tr6Stype : German National ISDN. priNi2Stype : National ISDN version 2. pri5essStype : AT&T switch priDms100Stype : DMS 100. priNttStype : Jap… |
| 1.3.6.1.4.1.449.2.1.3.2.9.1.3.1.3 | ColumnisgVGIsdnPRICCStatsDChannelState | read-only | mandatory | D Channel Status. dChannelUp : D Channel Up. dChannelDown : D Channel Down. unknown : Loop Test State. |
| 1.3.6.1.4.1.449.2.1.4 | Nodecdx6500Controls | |||
| 1.3.6.1.4.1.449.2.1.4.8 | NodeisgIsdnCtrlGroup | |||
| 1.3.6.1.4.1.449.2.1.4.8.1 | ScalarisgVGIsdnBootChannel | write-only | mandatory | Boot the ISDN channels. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING |