ITOUCH-CHASSIS-MIB
161 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.33.16 | NodexChassis | |||
| 1.3.6.1.4.1.33.16.1 | NodexChassisBasic | |||
| 1.3.6.1.4.1.33.16.1.1 | ScalarbasicBase802Address | read-only | mandatory | Base IEEE 802 global address for the chassis. |
| 1.3.6.1.4.1.33.16.1.2 | ScalarbasicSlot | read-only | mandatory | Chassis slot number (slotIndex) of the system whose agent is supplying this MIB. |
| 1.3.6.1.4.1.33.16.1.3 | ScalarbasicSlotNumber | read-only | mandatory | Number of slots in the chassis. |
| 1.3.6.1.4.1.33.16.1.4 | ScalarbasicNewBase802Address | read-write | mandatory | New base IEEE 802 global address for the chassis. Must be set in conjunction with featType 'changeEthernetAddress' and featKey from the ITouch System MIB. |
| 1.3.6.1.4.1.33.16.2 | NodexSegment | |||
| 1.3.6.1.4.1.33.16.2.1 | TablesegmentTable | not-accessible | mandatory | A list of segment entries, one for each segment of each type on the chassis. |
| 1.3.6.1.4.1.33.16.2.1.1 | RowsegmentEntry | not-accessible | mandatory | Values for a chassis segment. |
| 1.3.6.1.4.1.33.16.2.1.1.1 | ColumnsegmentType | read-only | mandatory | The segment type. |
| 1.3.6.1.4.1.33.16.2.1.1.2 | ColumnsegmentIndex | read-only | mandatory | An index value that uniquely identifies a segment. |
| 1.3.6.1.4.1.33.16.3 | NodexPort | |||
| 1.3.6.1.4.1.33.16.3.1 | ScalarportIOCardType | read-only | mandatory | The hardware type of the I/O card in this slot. |
| 1.3.6.1.4.1.33.16.3.2 | ScalarportIOCardSerialNumber | read-only | mandatory | The ITouch serial number of the I/O card in this slot. |
| 1.3.6.1.4.1.33.16.3.3 | ScalarportIOCardOperStatus | read-only | mandatory | Status of the I/O card relative to the function card in this slot. |
| 1.3.6.1.4.1.33.16.3.4 | TableportTable | not-accessible | mandatory | A list of port entries, one for each port of each type on the slots I/O card. |
| 1.3.6.1.4.1.33.16.3.4.1 | RowportEntry | not-accessible | mandatory | Values for an I/O card port. |
| 1.3.6.1.4.1.33.16.3.4.1.1 | ColumnportType | read-only | mandatory | The port type. |
| 1.3.6.1.4.1.33.16.3.4.1.2 | ColumnportIndex | read-only | mandatory | An index value that uniquely identifies a port. |
| 1.3.6.1.4.1.33.16.4 | NodexController | |||
| 1.3.6.1.4.1.33.16.4.1 | TablecontrollerTable | not-accessible | mandatory | A list of controller entries, one for each controller of each type on the local system. |
| 1.3.6.1.4.1.33.16.4.1.1 | RowcontrollerEntry | not-accessible | mandatory | Values for a controller. |
| 1.3.6.1.4.1.33.16.4.1.1.1 | ColumncontrollerType | read-only | mandatory | The controller type. |
| 1.3.6.1.4.1.33.16.4.1.1.2 | ColumncontrollerIndex | read-only | mandatory | An index value that uniquely identifies a controller. |
| 1.3.6.1.4.1.33.16.4.1.1.3 | ColumncontrollerNetwork | read-write | mandatory | The instance identifier of the first object in the conceptual row entry for the segment, port, or controller this controller is to use, that is, segmentType, p… |
| 1.3.6.1.4.1.33.16.5 | NodexInterface | |||
| 1.3.6.1.4.1.33.16.5.1 | TableinterfaceTable | not-accessible | mandatory | A list of interface entries, corresponding to the MIB II Interface group. These are directly equivalent to hardware network controllers, and must be the lowest… |
| 1.3.6.1.4.1.33.16.5.1.1 | RowinterfaceEntry | not-accessible | mandatory | Values for an interface. |
| 1.3.6.1.4.1.33.16.5.1.1.1 | ColumninterfaceIndex | read-only | mandatory | An index value that uniquely identifies an interface. The interface identified by a particular value of this index is the same interface as identified by the s… |
| 1.3.6.1.4.1.33.16.5.1.1.2 | ColumninterfaceNetwork | read-write | mandatory | The instance identifier of the first object in the conceptual row entry for the segment, port, or controller this interface is to use, that is, segmentType, po… |
| 1.3.6.1.4.1.33.16.6 | NodexSlotBootControl | |||
| 1.3.6.1.4.1.33.16.6.1 | TableslotBootControlTable | not-accessible | mandatory | A list of slot boot control entries. |
| 1.3.6.1.4.1.33.16.6.1.1 | RowslotBootControlEntry | not-accessible | mandatory | Values for a chassis slot. |
| 1.3.6.1.4.1.33.16.6.1.1.1 | ColumnslotBootControlSlot | read-only | mandatory | An index value that uniquely identifies a slot, defined the same as slotIndex. |
| 1.3.6.1.4.1.33.16.6.1.1.2 | ColumnslotBootControlIndex | read-only | mandatory | An index value that uniquely identifies a boot control entry, from 1 to the number of entries for the slot. |
| 1.3.6.1.4.1.33.16.6.1.1.3 | ColumnslotBootControlStatus | read-write | mandatory | The status of the entry. Set to 'disabled' to disable the entry. |
| 1.3.6.1.4.1.33.16.6.1.1.4 | ColumnslotBootControlController | read-write | mandatory | The instance identifier of the first object in the conceptual row entry for the controller this entry selects for bootstrap operation, that is, controllerType.… |
| 1.3.6.1.4.1.33.16.6.1.1.5 | ColumnslotBootControlNetwork | read-write | mandatory | The instance identifier of the first object in the conceptual row entry for the segment or port this entry selects for bootstrap operation, that is, segmentTyp… |
| 1.3.6.1.4.1.33.16.6.1.1.6 | ColumnslotBootControlMopFile | read-write | mandatory | The software file name to request for down-line load of the server via MOP or XMOP. |
| 1.3.6.1.4.1.33.16.6.1.1.7 | ColumnslotBootControlInternetFile | read-write | mandatory | The filename to request when loading an image via TFTP. |
| 1.3.6.1.4.1.33.16.6.1.1.8 | ColumnslotBootControlInternetAddress | read-write | mandatory | The internet address of the system is to use for itself when loading via TFTP. The value 0.0.0.0 indicates default action. |
| 1.3.6.1.4.1.33.16.6.1.1.9 | ColumnslotBootControlInternetServer | read-write | mandatory | The internet address of the server to use when loading an image via TFTP. The value 0.0.0.0 indicates default action. |
| 1.3.6.1.4.1.33.16.6.1.1.10 | ColumnslotBootControlInternetGateway | read-write | mandatory | The internet address of the gateway to use when loading an image via TFTP. The value 0.0.0.0 indicates default action. |
| 1.3.6.1.4.1.33.16.6.1.1.11 | ColumnslotBootControlInternetDelimiter | read-write | mandatory | The character separating the load file directory name from the file name. |
| 1.3.6.1.4.1.33.16.6.2 | TableslotBootControlFlagTable | not-accessible | mandatory | A list of slot boot control source flag entries. |
| 1.3.6.1.4.1.33.16.6.2.1 | RowslotBootControlFlagEntry | not-accessible | mandatory | Values for a boot control flag. |
| 1.3.6.1.4.1.33.16.6.2.1.1 | ColumnslotBootControlFlagLoadBootpTftp | read-write | mandatory | Control for performing load over BOOTP/TFTP. |
| 1.3.6.1.4.1.33.16.6.2.1.2 | ColumnslotBootControlFlagParamBootpTftp | read-write | mandatory | Control for performing parameter load over BOOTP/TFTP. |
| 1.3.6.1.4.1.33.16.6.2.1.3 | ColumnslotBootControlFlagDumpBootpTftp | read-write | mandatory | Control for performing dump over BOOTP/TFTP. |
| 1.3.6.1.4.1.33.16.6.2.1.4 | ColumnslotBootControlFlagLoadTftpDirect | read-write | mandatory | Control for performing load over direct TFTP. |
| 1.3.6.1.4.1.33.16.6.2.1.5 | ColumnslotBootControlFlagParamTftpDirect | read-write | mandatory | Control for performing parameter load over direct TFTP. |
| 1.3.6.1.4.1.33.16.6.2.1.6 | ColumnslotBootControlFlagDumpTftpDirect | read-write | mandatory | Control for performing dump over direct TFTP. |
| 1.3.6.1.4.1.33.16.6.2.1.7 | ColumnslotBootControlFlagLoadLocal | read-write | mandatory | Control for performing load from a local device. |
| 1.3.6.1.4.1.33.16.6.2.1.8 | ColumnslotBootControlFlagParamLocal | read-write | mandatory | Control for performing parameter load from a local device. |
| 1.3.6.1.4.1.33.16.6.2.1.9 | ColumnslotBootControlFlagDumpLocal | read-write | mandatory | Control for performing dump from a local device. |
| 1.3.6.1.4.1.33.16.6.2.1.10 | ColumnslotBootControlFlagLoadMop | read-write | mandatory | Control for performing load over Digital's MOP. |
| 1.3.6.1.4.1.33.16.6.2.1.11 | ColumnslotBootControlFlagParamMop | read-write | mandatory | Control for performing parameter load over Digital's MOP. |
| 1.3.6.1.4.1.33.16.6.2.1.12 | ColumnslotBootControlFlagDumpMop | read-write | mandatory | Control for performing dump over Digital's MOP. |
| 1.3.6.1.4.1.33.16.6.2.1.13 | ColumnslotBootControlFlagLoadXmop | read-write | mandatory | Control for performing load over ITouch extended MOP. |
| 1.3.6.1.4.1.33.16.6.2.1.14 | ColumnslotBootControlFlagParamXmop | read-write | mandatory | Control for performing parameter load over ITouch extended MOP. |
| 1.3.6.1.4.1.33.16.6.2.1.15 | ColumnslotBootControlFlagDumpXmop | read-write | mandatory | Control for performing dump over ITouch extended MOP. |
| 1.3.6.1.4.1.33.16.6.2.1.16 | ColumnslotBootControlFlagLoadRarpTftp | read-write | mandatory | Control for performing load over RARP/TFTP. |
| 1.3.6.1.4.1.33.16.6.2.1.17 | ColumnslotBootControlFlagParamRarpTftp | read-write | mandatory | Control for performing parameter load over RARP/TFTP. |
| 1.3.6.1.4.1.33.16.6.2.1.18 | ColumnslotBootControlFlagDumpRarpTftp | read-write | mandatory | Control for performing dump over RARP/TFTP. |
| 1.3.6.1.4.1.33.16.6.3 | TableslotBootControlStorageTable | not-accessible | mandatory | A list of slot boot control Storage entries. |
| 1.3.6.1.4.1.33.16.6.3.1 | RowslotBootControlStorageEntry | not-accessible | mandatory | Values for a chassis slot. |
| 1.3.6.1.4.1.33.16.6.3.1.1 | ColumnslotBootControlStorageClientSlot | read-only | mandatory | An index value that uniquely identifies a slot, defined the same as slotIndex. |
| 1.3.6.1.4.1.33.16.6.3.1.2 | ColumnslotBootControlStorageServerSlot | read-only | mandatory | An index value that uniquely identifies the slot in which the Storage record resides, with the same values as slotIndex. |
| 1.3.6.1.4.1.33.16.6.3.1.3 | ColumnslotBootControlStorageStatus | read-only | mandatory | The status of the entry. |
| 1.3.6.1.4.1.33.16.6.3.1.4 | ColumnslotBootControlStorageFailures | read-only | mandatory | The number of times a read from or write to a given Storage location failed |
| 1.3.6.1.4.1.33.16.7 | NodexSlot | |||
| 1.3.6.1.4.1.33.16.7.1 | TableslotTable | not-accessible | mandatory | A list of slot entries. |
| 1.3.6.1.4.1.33.16.7.1.1 | RowslotEntry | not-accessible | mandatory | Values for a chassis slot. |
| 1.3.6.1.4.1.33.16.7.1.1.1 | ColumnslotIndex | read-only | mandatory | An index value that uniquely identifies a slot, in the range 0 to basicSlotNumber, where the value 0 indicates the same slot as basicSlot. As the objects found… |
| 1.3.6.1.4.1.33.16.7.1.1.2 | ColumnslotAdminAction | read-write | mandatory | Control to cause reset of the system in a slot. When read, the value is always 'ready'. Setting to 'reset' or 'resetHold' causes a single attempt to take that … |
| 1.3.6.1.4.1.33.16.7.1.1.3 | ColumnslotOperStatus | read-only | mandatory | Relative to the chassis, the current operating status of the system in the slot. |
| 1.3.6.1.4.1.33.16.7.1.1.4 | ColumnslotSecondsSinceReset | read-only | mandatory | The number of seconds since the system in the slot was last reset by hardware or software. |
| 1.3.6.1.4.1.33.16.7.1.1.5 | ColumnslotHardwareType | read-only | mandatory | The type of hardware in the slot. |
| 1.3.6.1.4.1.33.16.7.1.1.6 | ColumnslotHardwareSerialNumber | read-only | mandatory | The ITouch serial number of the function card hardware in this slot. |
| 1.3.6.1.4.1.33.16.7.1.1.7 | ColumnslotHardwareRevision | read-only | mandatory | This revision level of the function card hardware in the slot. |
| 1.3.6.1.4.1.33.16.7.1.1.8 | ColumnslotIOCardType | read-only | mandatory | The hardware type of the I/O card in this slot. |
| 1.3.6.1.4.1.33.16.7.1.1.9 | ColumnslotIOCardSerialNumber | read-only | mandatory | The ITouch serial number of the I/O card in this slot. |
| 1.3.6.1.4.1.33.16.7.1.1.10 | ColumnslotIOCardOperStatus | read-only | mandatory | Status of the I/O card relative to the function card in this slot. |
| 1.3.6.1.4.1.33.16.7.1.1.11 | ColumnslotBootstrapFirmwareRevision | read-only | mandatory | The firmware revision level of the bootstrap ROM installed in the system in the slot. |
| 1.3.6.1.4.1.33.16.7.1.1.12 | ColumnslotElementalFirmwareRevision | read-only | mandatory | The firmware revision level of the minimal function ROM (management bus microprocessor) installed in the system in the slot. |
| 1.3.6.1.4.1.33.16.7.1.1.13 | ColumnslotMemorySize | read-only | mandatory | The number of bytes of memory installed in the system in the slot. |
| 1.3.6.1.4.1.33.16.7.1.1.14 | ColumnslotLedNumber | read-only | mandatory | The number of LEDs on the system in the slot. A value of 0 indicates none, unknown, or status not readable. |
| 1.3.6.1.4.1.33.16.7.1.1.15 | ColumnslotLedStatus | read-only | mandatory | The status of the LEDs displayed on the front and back of the system in the slot. The first bit is the high-order bit of the first byte of the value, proceedin… |
| 1.3.6.1.4.1.33.16.7.1.1.16 | ColumnslotBase802Address | read-only | mandatory | Base IEEE 802 global address for the slot. |
| 1.3.6.1.4.1.33.16.7.1.1.17 | ColumnslotIpAddress | read-only | mandatory | An internet address to which the system in this slot might respond. May be one of many. |
| 1.3.6.1.4.1.33.16.7.1.1.18 | ColumnslotPlus5Status | read-only | mandatory | Status of the +5 volt power to the slot. |
| 1.3.6.1.4.1.33.16.7.1.1.19 | ColumnslotPlus12Status | read-only | mandatory | Status of the +12 volt power to the slot. |
| 1.3.6.1.4.1.33.16.7.1.1.20 | ColumnslotMinus12Status | read-only | mandatory | Status of the -12 volt power to the slot. |
| 1.3.6.1.4.1.33.16.7.1.1.21 | ColumnslotPlus5Watts | read-only | mandatory | Tenths of watts of +5 volt power currently drawn by the slot. |
| 1.3.6.1.4.1.33.16.7.1.1.22 | ColumnslotPlus12Watts | read-only | mandatory | Tenths of watts of +12 volt power currently drawn by the slot. |
| 1.3.6.1.4.1.33.16.7.1.1.23 | ColumnslotMinus12Watts | read-only | mandatory | Tenths of watts of -12 volt power currently drawn by the slot. |
| 1.3.6.1.4.1.33.16.7.1.1.24 | ColumnslotIOCardHardwareVersion | read-only | mandatory | Version number of I/O card in the slot. |
| 1.3.6.1.4.1.33.16.7.1.1.25 | ColumnslotRestoreNVS | read-write | mandatory | Setting to 'execute' causes the non-volatile parameter storage to be restored from an installed memory card. Setting to 'ready' has no effect. |
| 1.3.6.1.4.1.33.16.7.1.1.26 | ColumnslotDefaultNVS | read-write | mandatory | Setting to 'execute' causes non-volatile stored parameters to be reset to factory defaults. Setting to 'ready' has no effect. |
| 1.3.6.1.4.1.33.16.7.2 | TableslotBootTable | not-accessible | mandatory | A list of slot bootstrap status entries. A given slot has an entry in this table only when slotOperStatus is one of: loadRequested, loading, dumpRequested, dum… |
| 1.3.6.1.4.1.33.16.7.2.1 | RowslotBootEntry | not-accessible | mandatory | Bootstrap status values for a chassis slot. |
| 1.3.6.1.4.1.33.16.7.2.1.1 | ColumnslotBootIndex | read-only | mandatory | An index value that uniquely identifies a slot, defined the same as slotIndex. |
| 1.3.6.1.4.1.33.16.7.2.1.2 | ColumnslotBootIfIndex | read-only | mandatory | An index value that uniquely identifies the interface in use for bootstrap functions. The interface identified by a particular value of this index is the same … |
| 1.3.6.1.4.1.33.16.7.2.1.3 | ColumnslotBootNetwork | read-only | mandatory | The instance identifier of the first object in the conceptual row entry for the segment or port this interface is using, that is, segmentType or portType. |
| 1.3.6.1.4.1.33.16.7.2.1.4 | ColumnslotBootProtocol | read-only | mandatory | The protocol in use for bootstrap operation. |
| 1.3.6.1.4.1.33.16.7.2.1.5 | ColumnslotBoot802Address | read-only | mandatory | IEEE 802 global address in use for bootstrap operation. |
| 1.3.6.1.4.1.33.16.7.2.1.6 | ColumnslotBootAddressType | read-only | mandatory | The type of network address contained in slotBootAddress. |
| 1.3.6.1.4.1.33.16.7.2.1.7 | ColumnslotBootAddress | read-only | mandatory | The network address the system in the slot is using to identify itself for bootstrap operation. |
| 1.3.6.1.4.1.33.16.7.2.1.8 | ColumnslotBootServerAddressType | read-only | mandatory | The type of network address contained in slotBootServerAddress. |
| 1.3.6.1.4.1.33.16.7.2.1.9 | ColumnslotBootServerAddress | read-only | mandatory | The network address of the system supplying bootstrap services to the system in the slot. |
| 1.3.6.1.4.1.33.16.7.2.1.10 | ColumnslotBootGatewayAddress | read-only | mandatory | The internet address of the router in use for bootstrap operation. |
| 1.3.6.1.4.1.33.16.7.2.1.11 | ColumnslotBootFileName | read-only | mandatory | The full name of the file in use for bootstrap operation. |
| 1.3.6.1.4.1.33.16.7.2.1.12 | ColumnslotBootBlockNumber | read-only | mandatory | The current block number being transferred for bootstrap operation, zero if unknown or not applicable. |
| 1.3.6.1.4.1.33.16.7.2.1.13 | ColumnslotBootCrashCode | read-only | mandatory | If slotOperStatus is dumpRequested or dumping, a code number to identify the crash reason; otherwise zero length. |
| 1.3.6.1.4.1.33.16.7.3 | TableslotControllerTable | not-accessible | mandatory | A list of controller entries, one for each controller of each type in each slot. |
| 1.3.6.1.4.1.33.16.7.3.1 | RowslotControllerEntry | not-accessible | mandatory | Values for a controller. |
| 1.3.6.1.4.1.33.16.7.3.1.1 | ColumnslotControllerType | read-only | mandatory | The controller type. |
| 1.3.6.1.4.1.33.16.7.3.1.2 | ColumnslotControllerIndex | read-only | mandatory | An index value that uniquely identifies a controller. |
| 1.3.6.1.4.1.33.16.7.3.1.3 | ColumnslotControllerNetwork | read-only | mandatory | The instance identifier of the first object in the conceptual row entry for the segment or port this controller is to use, that is, segmentType or portType. |
| 1.3.6.1.4.1.33.16.8 | NodexPowerSupply | |||
| 1.3.6.1.4.1.33.16.8.1 | TablepowerSupplyTable | not-accessible | mandatory | A list of power supply entries. |
| 1.3.6.1.4.1.33.16.8.1.1 | RowpowerSupplyEntry | not-accessible | mandatory | Values for a chassis power supply. |
| 1.3.6.1.4.1.33.16.8.1.1.1 | ColumnpowerSupplyIndex | read-only | mandatory | An index value that uniquely identifies a power supply, in the range 1 to the number of power supply slots in the chassis. |
| 1.3.6.1.4.1.33.16.8.1.1.2 | ColumnpowerSupplyAdminAction | read-write | mandatory | Control to cause reset of the power supply. When read, the value is always 'ready'. Setting to 'reset' or 'resetHold' causes a single attempt to take that acti… |
| 1.3.6.1.4.1.33.16.8.1.1.3 | ColumnpowerSupplyFirmwareVersion | read-only | mandatory | Version number of power supply firmware. |
| 1.3.6.1.4.1.33.16.8.1.1.4 | ColumnpowerSupplyRedundancyStatus | read-only | mandatory | The current redundancy status of the power supply. |
| 1.3.6.1.4.1.33.16.8.1.1.5 | ColumnpowerSupplyPlus5Status | read-only | mandatory | Status of the +5 volt power from the power supply. |
| 1.3.6.1.4.1.33.16.8.1.1.6 | ColumnpowerSupplyPlus12Status | read-only | mandatory | Status of the +12 volt power from the power supply. |
| 1.3.6.1.4.1.33.16.8.1.1.7 | ColumnpowerSupplyMinus12Status | read-only | mandatory | Status of the -12 volt power from the power supply. |
| 1.3.6.1.4.1.33.16.8.1.1.8 | ColumnpowerSupplyThermalWarningStatus | read-only | mandatory | The current thermal warning status of the power supply. |
| 1.3.6.1.4.1.33.16.8.1.1.9 | ColumnpowerSupplyThermalShutdownStatus | read-only | mandatory | The current thermal shutdown status of the power supply. |
| 1.3.6.1.4.1.33.16.8.1.1.10 | ColumnpowerSupplyFanStatus | read-only | mandatory | The current status of the power supply's fan. |
| 1.3.6.1.4.1.33.16.8.1.1.11 | ColumnpowerSupplyHardwareInhibitStatus | read-only | mandatory | The current status of the power supply's hardware inhibit. |
| 1.3.6.1.4.1.33.16.8.1.1.12 | ColumnpowerSupplyPlus5History | read-only | mandatory | History of the +5 volt power from the power supply. |
| 1.3.6.1.4.1.33.16.8.1.1.13 | ColumnpowerSupplyPlus12History | read-only | mandatory | History of the +12 volt power from the power supply. |
| 1.3.6.1.4.1.33.16.8.1.1.14 | ColumnpowerSupplyMinus12History | read-only | mandatory | History of the -12 volt power from the power supply. |
| 1.3.6.1.4.1.33.16.8.1.1.15 | ColumnpowerSupplyThermalWarningHistory | read-only | mandatory | The thermal warning history of the power supply. |
| 1.3.6.1.4.1.33.16.8.1.1.16 | ColumnpowerSupplyThermalShutdownHistory | read-only | mandatory | The thermal shutdown history of the power supply. |
| 1.3.6.1.4.1.33.16.8.1.1.17 | ColumnpowerSupplyFanHistory | read-only | mandatory | The status history of the power supply's fan. |
| 1.3.6.1.4.1.33.16.8.1.1.18 | ColumnpowerSupplyHardwareInhibitHistory | read-only | mandatory | The status history of the power supply's hardware inhibit. |
| 1.3.6.1.4.1.33.16.8.1.1.19 | ColumnpowerSupplyPlus5Volts | read-only | mandatory | In hundredths, volts of +5 volt power currently provided by the power supply. A value of 0 indicates unknown. |
| 1.3.6.1.4.1.33.16.8.1.1.20 | ColumnpowerSupplyPlus12Volts | read-only | mandatory | In hundredths, volts of +12 volt power currently provided by the power supply. A value of 0 indicates unknown. |
| 1.3.6.1.4.1.33.16.8.1.1.21 | ColumnpowerSupplyMinus12Volts | read-only | mandatory | In hundredths, volts of -12 volt power currently provided by the power supply. A value of 0 indicates unknown. |
| 1.3.6.1.4.1.33.16.8.1.1.22 | ColumnpowerSupplyWatts | read-only | mandatory | Watts of power currently drawn from this power supply. A value of 0 indicates unknown. |
| 1.3.6.1.4.1.33.16.8.1.1.23 | ColumnpowerSupplyWattsMax | read-only | mandatory | Maximum watts of power available from this power supply. A value of 0 indicates unknown. |
| 1.3.6.1.4.1.33.16.8.1.1.24 | ColumnpowerSupplyChassisWatts | read-only | mandatory | Total watts of power currently drawn by the entire chassis. A value of 0 indicates unknown. |
| 1.3.6.1.4.1.33.16.8.1.1.25 | ColumnpowerSupplyChassisWattsMax | read-only | mandatory | Total maximum watts of power available from all the power supplies in the chassis. A value of 0 indicates unknown. |
| 1.3.6.1.4.1.33.16.8.1.1.26 | ColumnpowerSupplyHardwareType | read-only | mandatory | The type of power supply. |
| 1.3.6.1.4.1.33.16.9 | NodexFirmwareUpdate | |||
| 1.3.6.1.4.1.33.16.9.1 | TablefirmwareUpdateTable | not-accessible | mandatory | Table of descriptive and status information concerning the writing of firmware to a target I/O card. |
| 1.3.6.1.4.1.33.16.9.1.1 | RowfirmwareUpdateEntry | not-accessible | mandatory | An entry in the table concerning the writing of firmware to a target I/O card. |
| 1.3.6.1.4.1.33.16.9.1.1.1 | ColumnfirmwareUpdateSlotIndex | read-only | mandatory | This variable identifies the slot to which is to be the target of the firmware update. |
| 1.3.6.1.4.1.33.16.9.1.1.2 | ColumnfirmwareUpdateDefaultFileName | read-only | mandatory | This variable when read will obtain the default file name from the target. |
| 1.3.6.1.4.1.33.16.9.1.1.3 | ColumnfirmwareUpdateFileName | read-write | mandatory | This variable contains the name of the file to be read from the flash memory card and written to the target. |
| 1.3.6.1.4.1.33.16.9.1.1.4 | ColumnfirmwareUpdateStatus | read-write | mandatory | This variable is used to start the update process. The agent always 'ready' for this value. Setting this value to 'execute' causes the agent to write the file … |
| 1.3.6.1.4.1.33.16.9.1.1.5 | ColumnfirmwareUpdateState | read-only | mandatory | This variable indicates the current state of firmware update, 'idle' indicates that firmware update may be initiated, and 'writing' indicates that an update is… |
| 1.3.6.1.4.1.33.16.9.1.1.6 | ColumnfirmwareUpdateCompletionStatus | read-only | mandatory | This variable indicates the completion status of the the last firmware update attempt. 'none' indicates that no firmware update has yet been attempted. |
| 1.3.6.1.4.1.33.16.9.1.1.7 | ColumnfirmwareUpdateMethod | read-write | mandatory | This variable indicates the method of update of the firmware update attempt. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Letter | INTEGER { a(1), b(2), c(3), d(4), e(5), f(6), g(7), h(8), i(9), j(10), k(11), l(12), m(13), n(14), o(15), p(16), q(17), r(18), s(19), t(20), u(21), v(22), w(23), x(24), y(25), z(26) } | ||
| NetworkType | INTEGER { unknown(1), other(2), ethernet(3), tokenRing(4), fddi(5), wan(6), ethernetRepeater(7), tokenRingConcentrator(8), fddiConcentrator(9), atm(10), isdn(11), switchplane(12), switchedEthernet(13) } | ||
| SerialNumber | OCTET STRING (SIZE (0..6)) |