ITOUCH-DECNET-MIB
71 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.33.14 | NodexDecnet | |||
| 1.3.6.1.4.1.33.14.1 | NodexRcp | |||
| 1.3.6.1.4.1.33.14.1.1 | ScalarrcpRemoteAddress | read-only | mandatory | If a remote console session exists, the Ethernet address of the remote partner, otherwise zero length. |
| 1.3.6.1.4.1.33.14.2 | NodexPhiv | |||
| 1.3.6.1.4.1.33.14.2.1 | NodexPhivRoute | |||
| 1.3.6.1.4.1.33.14.2.1.1 | ScalarphivPathSelection | read-write | mandatory | The algorithm used to balance traffic between equal next hop paths. 'roundRobin' selects the next hop using a round robin algorithm for each hop. 'samePath' se… |
| 1.3.6.1.4.1.33.14.2.1.2 | ScalarphivMaxPaths | read-write | mandatory | The maximum number of equal cost next hops that the router can remember and successfully load balance between. |
| 1.3.6.1.4.1.33.14.2.1.3 | ScalarphivStatus | read-only | mandatory | The status of the DECnet routing software. |
| 1.3.6.1.4.1.33.14.2.2 | NodexPhivCircuit | |||
| 1.3.6.1.4.1.33.14.2.2.1 | TablephivCircuitTable | not-accessible | mandatory | A list of DECnet circuit entries. |
| 1.3.6.1.4.1.33.14.2.2.1.1 | RowphivCircuitEntry | not-accessible | mandatory | Parameter values for a DECnet circuit. |
| 1.3.6.1.4.1.33.14.2.2.1.1.1 | ColumnxPhivCircuitIndex | read-only | mandatory | Identification of a circuit entry. Same as an interface index (ifIndex). |
| 1.3.6.1.4.1.33.14.2.2.1.1.2 | ColumnphivCircuitRoutingTimer | read-write | mandatory | The maximum time in seconds allowed between Routing updates on the circuit. Different values for LANs vs. WANs. |
| 1.3.6.1.4.1.33.14.2.2.1.1.3 | ColumnphivCircuitOperCost | read-only | mandatory | The actual cost associated with the circuit. |
| 1.3.6.1.4.1.33.14.2.2.1.1.4 | ColumnphivCircuitErrors | read-only | mandatory | The number of routed DECnet packets received in error on this circuit. |
| 1.3.6.1.4.1.33.14.2.2.1.1.5 | ColumnphivCircuitLastError | read-only | mandatory | The error of the last routed DECnet packet received in error on this circuit. |
| 1.3.6.1.4.1.33.14.2.2.1.1.6 | ColumnphivCircuitLastErrorTime | read-only | mandatory | The date and time that the last routed DECnet packet was received in error on this circuit. |
| 1.3.6.1.4.1.33.14.2.2.1.1.7 | ColumnphivCircuitLastErrorData | read-only | mandatory | The first 22 bytes of the last routed DECnet packet received in error on this circuit. |
| 1.3.6.1.4.1.33.14.2.2.1.1.8 | ColumnphivCircuitProtocolPriority | read-write | mandatory | The priority at which all DECnet routed packets will be placed on the WAN output queue. |
| 1.3.6.1.4.1.33.14.2.2.1.1.9 | ColumnphivCircuitRoutingPriority | read-write | mandatory | Router's priority to be designated router on this circuit. |
| 1.3.6.1.4.1.33.14.2.3 | NodexPhivImport | |||
| 1.3.6.1.4.1.33.14.2.3.1 | TablephivCircuitImportTable | not-accessible | mandatory | A list of circuit import filter entries. |
| 1.3.6.1.4.1.33.14.2.3.1.1 | RowphivCircuitImportEntry | not-accessible | mandatory | Parameter values for an import filter. |
| 1.3.6.1.4.1.33.14.2.3.1.1.1 | ColumnphivCircuitImportIf | read-only | mandatory | The interface associated with the import routing filter. |
| 1.3.6.1.4.1.33.14.2.3.1.1.2 | ColumnphivCircuitImportAddr | read-only | mandatory | The address (node or area) to match against learned route entries to decide whether to import the entry to the routing database. |
| 1.3.6.1.4.1.33.14.2.3.1.1.3 | ColumnphivCircuitImportMask | read-only | mandatory | The mask which is ANDed with the address field as well as the route entries address to determine whether the address matches the route entry. |
| 1.3.6.1.4.1.33.14.2.3.1.1.4 | ColumnphivCircuitImportAction | read-write | mandatory | The action to take if the address field along with the mask field matches the route entry. |
| 1.3.6.1.4.1.33.14.2.3.1.1.5 | ColumnphivCircuitImportStatus | read-write | mandatory | Setting to 'invalid' removes this import filter from the table. Setting to 'valid' has no effect. |
| 1.3.6.1.4.1.33.14.2.4 | NodexPhivImportArea | |||
| 1.3.6.1.4.1.33.14.2.4.1 | TablephivCircuitImportAreaTable | not-accessible | mandatory | A list of circuit import area filter entries. |
| 1.3.6.1.4.1.33.14.2.4.1.1 | RowphivCircuitImportAreaEntry | not-accessible | mandatory | Parameter values for an import area filter. |
| 1.3.6.1.4.1.33.14.2.4.1.1.1 | ColumnphivCircuitImportAreaIf | read-only | mandatory | The interface associated with the import area routing filter. |
| 1.3.6.1.4.1.33.14.2.4.1.1.2 | ColumnphivCircuitImportAreaAddr | read-only | mandatory | The address (node or area) to match against learned route entries to decide whether to import the entry to the routing database. |
| 1.3.6.1.4.1.33.14.2.4.1.1.3 | ColumnphivCircuitImportAreaMask | read-only | mandatory | The mask which is ANDed with the address field as well as the route entries address to determine whether the address matches the route entry. |
| 1.3.6.1.4.1.33.14.2.4.1.1.4 | ColumnphivCircuitImportAreaAction | read-write | mandatory | The action to take if the address field along with the mask field matches the route entry. |
| 1.3.6.1.4.1.33.14.2.4.1.1.5 | ColumnphivCircuitImportAreaStatus | read-write | mandatory | Setting to 'invalid' removes this import area filter from the table. Setting to 'valid' has no effect. |
| 1.3.6.1.4.1.33.14.2.5 | NodexPhivExport | |||
| 1.3.6.1.4.1.33.14.2.5.1 | TablephivCircuitExportTable | not-accessible | mandatory | A list of circuit export filter entries. |
| 1.3.6.1.4.1.33.14.2.5.1.1 | RowphivCircuitExportEntry | not-accessible | mandatory | Parameter values for an export filter. |
| 1.3.6.1.4.1.33.14.2.5.1.1.1 | ColumnphivCircuitExportIf | read-only | mandatory | The interface associated with the export routing filter. |
| 1.3.6.1.4.1.33.14.2.5.1.1.2 | ColumnphivCircuitExportAddr | read-only | mandatory | The address (node or area) to match against learned route entries to decide whether to export the entry to the routing database. |
| 1.3.6.1.4.1.33.14.2.5.1.1.3 | ColumnphivCircuitExportMask | read-only | mandatory | The mask which is ANDed with the address field as well as the route entries address to determine whether the address matches the route entry. |
| 1.3.6.1.4.1.33.14.2.5.1.1.4 | ColumnphivCircuitExportAction | read-write | mandatory | The action to take if the address field along with the mask field matches the route entry. |
| 1.3.6.1.4.1.33.14.2.5.1.1.5 | ColumnphivCircuitExportStatus | read-write | mandatory | Setting to 'invalid' removes this export filter from the table. Setting to 'valid' has no effect. |
| 1.3.6.1.4.1.33.14.2.6 | NodexPhivExportArea | |||
| 1.3.6.1.4.1.33.14.2.6.1 | TablephivCircuitExportAreaTable | not-accessible | mandatory | A list of circuit export area filter entries. |
| 1.3.6.1.4.1.33.14.2.6.1.1 | RowphivCircuitExportAreaEntry | not-accessible | mandatory | Parameter values for an export area filter. |
| 1.3.6.1.4.1.33.14.2.6.1.1.1 | ColumnphivCircuitExportAreaIf | read-only | mandatory | The interface associated with the export area routing filter. |
| 1.3.6.1.4.1.33.14.2.6.1.1.2 | ColumnphivCircuitExportAreaAddr | read-only | mandatory | The address (node or area) to match against learned route entries to decide whether to export the entry to the routing database. |
| 1.3.6.1.4.1.33.14.2.6.1.1.3 | ColumnphivCircuitExportAreaMask | read-only | mandatory | The mask which is ANDed with the address field as well as the route entries address to determine whether the address matches the route entry. |
| 1.3.6.1.4.1.33.14.2.6.1.1.4 | ColumnphivCircuitExportAreaAction | read-write | mandatory | The action to take if the address field along with the mask field matches the route entry. |
| 1.3.6.1.4.1.33.14.2.6.1.1.5 | ColumnphivCircuitExportAreaStatus | read-write | mandatory | Setting to 'invalid' removes this export area filter from the table. Setting to 'valid' has no effect. |
| 1.3.6.1.4.1.33.14.2.7 | NodexPhivFilter | |||
| 1.3.6.1.4.1.33.14.2.7.1 | TablephivCircuitFilterTable | not-accessible | mandatory | A list of circuit filter entries. |
| 1.3.6.1.4.1.33.14.2.7.1.1 | RowphivCircuitFilterEntry | not-accessible | mandatory | Parameter values for a filter. |
| 1.3.6.1.4.1.33.14.2.7.1.1.1 | ColumnphivCircuitFilterIf | read-only | mandatory | The interface associated with the filter entry. |
| 1.3.6.1.4.1.33.14.2.7.1.1.2 | ColumnphivCircuitFilterDstAddr | read-only | mandatory | The address (node or area) to match against the destination address of the packet to decide whether to forward the packet. |
| 1.3.6.1.4.1.33.14.2.7.1.1.3 | ColumnphivCircuitFilterDstMask | read-only | mandatory | The mask which is ANDed with the destination address field and the packet's destination address to determine whether the address matches the packet's address. |
| 1.3.6.1.4.1.33.14.2.7.1.1.4 | ColumnphivCircuitFilterSrcAddr | read-only | mandatory | The address (node or area) to match against the source address of the packet to decide whether to forward the packet. |
| 1.3.6.1.4.1.33.14.2.7.1.1.5 | ColumnphivCircuitFilterSrcMask | read-only | mandatory | The mask which is ANDed with the source address field and the packet's source address to determine whether the address matches the packet's address. |
| 1.3.6.1.4.1.33.14.2.7.1.1.6 | ColumnphivCircuitFilterAction | read-write | mandatory | The action to take if the address fields along with the mask fields match the packet. |
| 1.3.6.1.4.1.33.14.2.7.1.1.7 | ColumnphivCircuitFilterStatus | read-write | mandatory | Setting to 'invalid' removes this Filter filter from the table. Setting to 'valid' has no effect. |
| 1.3.6.1.4.1.33.14.2.8 | NodexPhivTraffic | |||
| 1.3.6.1.4.1.33.14.2.8.1 | ScalarphivTrafficSort | read-write | mandatory | Setting to 'execute' causes the most recent traffic information to be sorted into the phivTrafficTable. The sorting precedence is: decreasing percentage, incre… |
| 1.3.6.1.4.1.33.14.2.8.2 | TablephivTrafficTable | not-accessible | mandatory | A list of traffic entries, sorted in the order specified by phivTrafficSort. |
| 1.3.6.1.4.1.33.14.2.8.2.1 | RowphivTrafficEntry | not-accessible | mandatory | A traffic entry. |
| 1.3.6.1.4.1.33.14.2.8.2.1.1 | ColumnphivTrafficIndex | read-only | mandatory | Identification of this traffic entry. |
| 1.3.6.1.4.1.33.14.2.8.2.1.2 | ColumnphivTrafficPercent | read-only | mandatory | The percentage of total traffic that this traffic entry represents, in tenths of a percent. |
| 1.3.6.1.4.1.33.14.2.8.2.1.3 | ColumnphivTrafficDst | read-only | mandatory | The destination to which the traffic entry applies. |
| 1.3.6.1.4.1.33.14.2.8.2.1.4 | ColumnphivTrafficSrc | read-only | mandatory | The source to which the traffic entry applies. |
| 1.3.6.1.4.1.33.14.2.8.2.1.5 | ColumnphivTrafficIf | read-only | mandatory | The inbound interface to which the traffic entry applies. This value is the same as IfIndex. |