ITOUCH-LINK-MIB
27 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.33.24 | NodexLink | |||
| 1.3.6.1.4.1.33.24.1 | NodexLinkBasic | |||
| 1.3.6.1.4.1.33.24.1.1 | TablelinkTable | not-accessible | mandatory | A list of links. |
| 1.3.6.1.4.1.33.24.1.1.1 | RowlinkEntry | not-accessible | mandatory | Link entry. |
| 1.3.6.1.4.1.33.24.1.1.1.1 | ColumnlinkNoBuffers | read-only | mandatory | The number of packets discarded because of lack of buffers. |
| 1.3.6.1.4.1.33.24.1.1.1.2 | ColumnlinkDelayExceeded | read-only | mandatory | The number of packets discarded because they were held to long. |
| 1.3.6.1.4.1.33.24.1.1.1.3 | ColumnlinkOutputQFull | read-only | mandatory | The number of packets discarded because the output queue was full. |
| 1.3.6.1.4.1.33.24.1.1.1.4 | ColumnlinkDownTime | read-only | mandatory | Total number of seconds that the link has been down. |
| 1.3.6.1.4.1.33.24.1.1.1.5 | ColumnlinkDownCount | read-only | mandatory | Number of times that the link has been down. |
| 1.3.6.1.4.1.33.24.1.1.1.6 | ColumnlinkDownLastStart | read-only | mandatory | Value of sysUpTime when the link last went down. If the link is up the value is 0. |
| 1.3.6.1.4.1.33.24.1.1.1.7 | ColumnlinkStatus | read-only | mandatory | The status of the link |
| 1.3.6.1.4.1.33.24.1.1.1.8 | ColumnlinkLostBuffers | read-only | mandatory | Number of packets discarded because of lost buffers |
| 1.3.6.1.4.1.33.24.1.2 | TablelinkResourceTable | not-accessible | mandatory | A list of link resources. |
| 1.3.6.1.4.1.33.24.1.2.1 | RowlinkResourceEntry | not-accessible | mandatory | link entry. |
| 1.3.6.1.4.1.33.24.1.2.1.1 | ColumnlinkResourceType | read-only | mandatory | The resource type. |
| 1.3.6.1.4.1.33.24.1.2.1.2 | ColumnlinkResourceCurrent | read-only | mandatory | The current percent of the resource used. |
| 1.3.6.1.4.1.33.24.1.2.1.3 | ColumnlinkResourceHigh | read-only | mandatory | The highest percent of the resource used. |
| 1.3.6.1.4.1.33.24.1.2.1.4 | ColumnlinkResourceAverage | read-only | mandatory | The average percent of the resource used. |
| 1.3.6.1.4.1.33.24.3 | NodexWan | |||
| 1.3.6.1.4.1.33.24.3.1 | TablewanTable | not-accessible | mandatory | A list of WANs. |
| 1.3.6.1.4.1.33.24.3.1.1 | RowwanEntry | not-accessible | mandatory | WAN entry. |
| 1.3.6.1.4.1.33.24.3.1.1.1 | ColumnwanProtocol | read-write | mandatory | Controls the protocol run on the link, changes ifType, typically to 'other'. |
| 1.3.6.1.4.1.33.24.3.1.1.2 | ColumnwanCompressionAdminStatus | read-write | mandatory | Controls whether link compression will be run if the link is running the xyplex protocol. Auto will enable compression for links slower than 67000. |
| 1.3.6.1.4.1.33.24.3.1.1.3 | ColumnwanMaxForwardDelay | read-write | mandatory | The number of milliseconds that a packet may be held on the Wan link before it will be discarded. The value 0 indicates no limit. |
| 1.3.6.1.4.1.33.24.3.1.1.4 | ColumnwanMaxMultiForwardDelay | read-write | mandatory | The number of milliseconds that a multicast packet may be held on the Wan link before it will be discarded. The value 0 indicates no delay. |
| 1.3.6.1.4.1.33.24.3.1.1.5 | ColumnwanAdminSpeed | read-write | mandatory | The speed that the software should use for the wan link. The value 0 indicates that the measured speed should be used. |
| 1.3.6.1.4.1.33.24.3.1.1.6 | ColumnwanCompressionOperStatus | read-only | mandatory | If the link is running the Xyplex protocol, indicates whether link compression is running. |