ITOUCH-PARAM-CLIENT-MIB
30 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.33.7 | NodexParamClient | |||
| 1.3.6.1.4.1.33.7.1 | ScalarparamClientLoaderName | read-only | mandatory | The name of the system that most recently provided this system's stored parameters. Corresponds directly to the name value labeled 'Loaded From:' in the PARAME… |
| 1.3.6.1.4.1.33.7.2 | ScalarparamClientLoaderAddressType | read-only | mandatory | The type of network address contained in paramClientLoaderAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'loc… |
| 1.3.6.1.4.1.33.7.3 | ScalarparamClientLoaderAddress | read-only | mandatory | The network address of the system that most recently provided this system's stored parameters. Corresponds directly to the address value labeled 'Loaded From:'… |
| 1.3.6.1.4.1.33.7.4 | ScalarparamClientParameterVersion | read-write | mandatory | The version number of the parameters as stored in this system's local memory. Corresponds directly to SERVER PARAMETER VERSION and the value labeled 'Last Upda… |
| 1.3.6.1.4.1.33.7.5 | ScalarparamClientUpdateTime | read-only | mandatory | This system's local date and time when it last attempted to store parameters with a parameter server. Corresponds directly to the values labeled 'Last Update D… |
| 1.3.6.1.4.1.33.7.6 | ScalarparamClientServerCheck | read-write | mandatory | Control over whether or not this system is allowed to check for additional parameter servers. 'enabled' allows checking. Corresponds directly to PARAMETER SERV… |
| 1.3.6.1.4.1.33.7.7 | ScalarparamClientCheckInterval | read-write | mandatory | The number of minutes between checks for additional parameter servers. Corresponds directly to PARAMETER SERVER CHECK TIMER and the value labeled 'Check Timer:… |
| 1.3.6.1.4.1.33.7.8 | ScalarparamClientCheckNow | read-write | mandatory | Control to cause this system to immediately check for additional parameter servers. The agent always returns 'ready' for this value. Setting the value to 'read… |
| 1.3.6.1.4.1.33.7.9 | ScalarparamClientServerLimit | read-write | mandatory | The maximum number of parameter servers this system is allowed to remember at the same time. Corresponds directly to PARAMETER SERVER LIMIT and the value label… |
| 1.3.6.1.4.1.33.7.10 | ScalarparamClientRetransmitInterval | read-write | mandatory | The number of minutes between this system's attempts to store new parameters with a server that has not acknowledged previous attempts. Corresponds directly to… |
| 1.3.6.1.4.1.33.7.11 | ScalarparamClientRetransmitLimit | read-write | mandatory | The maximum number of attempts by this system to store new parameters with a server that has not acknowledged previous attempts. Corresponds directly to PARAME… |
| 1.3.6.1.4.1.33.7.12 | ScalarparamClientState | read-only | mandatory | This system's state with regard to update attempts. The value meanings are: other none of the following idle no update in progress internal internal state of n… |
| 1.3.6.1.4.1.33.7.13 | ScalarparamClientProtocolErrors | read-only | mandatory | The number of invalid parameter service protocol messages received by this system. Corresponds directly to the value labeled 'Bad Parameter Messages:' in the P… |
| 1.3.6.1.4.1.33.7.14 | ScalarparamClientServerRejects | read-only | mandatory | The number of parameter servers this system rejected due to exceeding paramClientServerLimit. Corresponds directly to the value labeled 'Rejected Servers:' in … |
| 1.3.6.1.4.1.33.7.15 | ScalarparamClientServerNumber | read-only | mandatory | The number of parameter servers known to this system, indicating the number of entries in serverTable. Corresponds directly to the value labeled 'Parameter Ser… |
| 1.3.6.1.4.1.33.7.16 | TableparamServerTable | not-accessible | mandatory | A list of parameter server entries. The number of entries is given by the value of paramClientServerNumber. |
| 1.3.6.1.4.1.33.7.16.1 | RowparamServerEntry | not-accessible | mandatory | Status and parameter values for a parameter server. |
| 1.3.6.1.4.1.33.7.16.1.1 | ColumnparamServerName | read-only | mandatory | The server's name, unique within this system. Always 16 characters, null padded on the end. Corresponds directly to the name used to create the entry and the v… |
| 1.3.6.1.4.1.33.7.16.1.2 | ColumnparamServerEntryStatus | read-write | mandatory | The status of the entry. Set to 'invalid' to remove the entry, which corresponds directly to the CLEAR/PURGE PARAMETER SERVER command. Actual removal of the en… |
| 1.3.6.1.4.1.33.7.16.1.3 | ColumnparamServerAddressType | read-write | mandatory | The type of network address contained in paramServerAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'local' me… |
| 1.3.6.1.4.1.33.7.16.1.4 | ColumnparamServerAddress | read-write | mandatory | The server's network address. Corresponds directly to the value labeled 'Address' in the PARAMETER SERVER display. |
| 1.3.6.1.4.1.33.7.16.1.5 | ColumnparamServerStoredVersion | read-only | mandatory | Parameter version number currently stored at the server. Corresponds directly to the value labeled 'Version' in the PARAMETER SERVER display. |
| 1.3.6.1.4.1.33.7.16.1.6 | ColumnparamServerStoredTime | read-only | mandatory | The server's date and time when it stored the parameters of version paramServerStoredVersion. Corresponds directly to the value labeled 'Date' in the PARAMETER… |
| 1.3.6.1.4.1.33.7.16.1.7 | ColumnparamServerStoredStatus | read-only | mandatory | Status of this system's parameters with respect to the server. Corresponds directly to the value labeled 'Status' in the PARAMETER SERVER display. The value me… |
| 1.3.6.1.4.1.33.7.16.1.8 | ColumnparamServerStoredFailure | read-only | mandatory | When paramServerStoredStatus is 'failed' or 'failing', the reason for the most recent failure. Corresponds directly to the value labeled 'Reason' in the PARAME… |
| 1.3.6.1.4.1.33.7.17 | ScalarparamClientPath | read-write | mandatory | The directory path to the parameter file on all servers. Corresponds directly to PARAMETER SERVER PATH and the value labeled 'Path:' in the PARAMETER SERVER di… |
| 1.3.6.1.4.1.33.7.18 | ScalarparamClientChassisStorageState | read-only | mandatory | The status of the current attempt to update parameters in local chassis storage. Corresponds directly to the value labeled 'Chassis Configuration:'. |
| 1.3.6.1.4.1.33.7.20 | ScalarparamClientTftpBroadcast | read-write | mandatory | Control over whether or not this system is allowed to send out a TFTP read broadcast after sending a BOOTP broadcast during the Parameter Check Function. 'enab… |
| 1.3.6.1.4.1.33.7.21 | ScalarparamClientWriteNow | read-write | mandatory | Control to start saving parameters immediately in response to an execute. Corresponds directly to the WRITE PARAMETERS command. In response to a get-request or… |