ITOUCH-REPEATER-MIB
186 objects
No module-level DESCRIPTION found.
Imported Objects
| BRIDGE-MIB | MacAddress |
| ITOUCH-MIB | iTouch TypedAddress |
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter Gauge TimeTicks |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.33.9 | NodehubDeprecated | |||
| 1.3.6.1.4.1.33.17 | NodexRepeater | |||
| 1.3.6.1.4.1.33.17.1 | NodeaccessViolation | Access violation by connected system with Ethernet address not allowed by repeaterPortAccessTable and repeaterPortAccessAction. | ||
| 1.3.6.1.4.1.33.17.1 | NodexRepeaterInfo | |||
| 1.3.6.1.4.1.33.17.1.1 | ScalarrepeaterAccessViolation | read-write | mandatory | Controls action to take when an access violation occurs. |
| 1.3.6.1.4.1.33.17.1.2 | ScalarrepeaterMyGroup | read-only | mandatory | The index value of the group that is directly associated with the agent. The snmp support for the group associated with the agent is a superset of the support … |
| 1.3.6.1.4.1.33.17.1.3 | ScalarrepeaterFifoOverflows | read-only | deprecated | Deprecated, use repeaterRepeaterFifoOverflows in the repeaterRepeater group for the desired repeater. |
| 1.3.6.1.4.1.33.17.1.4 | ScalarrepeaterLEDDisplay | read-write | mandatory | Controls reason for flashing front panel LEDs. |
| 1.3.6.1.4.1.33.17.1.5 | ScalarrepeaterReports | read-write | deprecated | Deprecated, use repeaterRepeaterReports in the repeaterRepeater group for the desired repeater on which report generation is to be controlled. |
| 1.3.6.1.4.1.33.17.1.6 | ScalarrepeaterHealthTrap | read-write | mandatory | Controls the generation of the repeater health trap. |
| 1.3.6.1.4.1.33.17.1.7 | ScalarrepeaterStatusChangeTrap | read-write | mandatory | Controls the generation of the repeater status change trap. |
| 1.3.6.1.4.1.33.17.1.8 | ScalarrepeaterAccessViolationTrap | read-write | mandatory | Controls the generation of the repeater access violation trap. |
| 1.3.6.1.4.1.33.17.1.9 | ScalarrepeaterIntegrityLossTrap | read-write | mandatory | Controls the generation of the repeater integrity loss trap. |
| 1.3.6.1.4.1.33.17.1.10 | ScalarrepeaterRedundancyPathChangeTrap | read-write | mandatory | Controls the generation of the repeater redundancy path change trap. |
| 1.3.6.1.4.1.33.17.2 | NodeintegrityLoss | This port has lost link integrity. | ||
| 1.3.6.1.4.1.33.17.2 | NodexRepeaterGroupInfo | |||
| 1.3.6.1.4.1.33.17.2.1 | TablerepeaterGroupTable | not-accessible | mandatory | Table of descriptive and status information about the groups. |
| 1.3.6.1.4.1.33.17.2.1.1 | RowrepeaterGroupEntry | not-accessible | mandatory | An entry in the table, containing information about a group. |
| 1.3.6.1.4.1.33.17.2.1.1.1 | ColumnrepeaterGroupIndex | read-only | mandatory | This variable identifies the group within the repeater for which this entry contains information. This value is the same as rptrGroupIndex. |
| 1.3.6.1.4.1.33.17.2.1.1.2 | ColumnrepeaterGroupSQE | read-only | deprecated | Deprecated, use repeaterRepeaterSQE in the repeaterRepeaterGroup for the SQE count on the desired repeater. This object will always return the count for repeat… |
| 1.3.6.1.4.1.33.17.2.1.1.3 | ColumnrepeaterGroupJabbers | read-only | deprecated | Deprecated, use repeaterRepeaterJabbers in the repeaterRepeaterGroup for the Jabber count on the desired repeater. This object will always return the count for… |
| 1.3.6.1.4.1.33.17.2.1.1.4 | ColumnrepeaterGroupSegment | read-write | deprecated | Deprecated, use repeaterRepeaterSegment in the repeaterRepeaterGroup to control the segment mapping for the desired repeater. This object will always control t… |
| 1.3.6.1.4.1.33.17.2.1.1.5 | ColumnrepeaterGroupSecurityLock | read-write | mandatory | This variable indicates the state of security lockdown on an unmanaged repeater. The only writable value is 'unlocked'. |
| 1.3.6.1.4.1.33.17.2.1.1.6 | ColumnrepeaterGroupIOCardType | read-only | mandatory | The hardware type of the I/O card, as defined in ITouch Assigned Numbers. |
| 1.3.6.1.4.1.33.17.2.1.1.7 | ColumnrepeaterGroupIOCardFirmwareVersion | read-only | mandatory | The firmware revision level of the I/O card ROM. |
| 1.3.6.1.4.1.33.17.2.1.1.8 | ColumnrepeaterGroupIOCardOperStatus | read-only | mandatory | Relative to the chassis, the current operating status of the I/O card. |
| 1.3.6.1.4.1.33.17.2.1.1.9 | ColumnrepeaterGroupManagement | read-only | mandatory | This variable indicates the level of management control and observation available. |
| 1.3.6.1.4.1.33.17.2.1.1.10 | ColumnrepeaterGroupRepeaterNumber | read-only | mandatory | The number of logical repeaters visible via this repeater. |
| 1.3.6.1.4.1.33.17.2.1.1.11 | ColumnrepeaterGroupRepeaterHardwareVersion | read-only | mandatory | The repeater chip set hardware revision level. |
| 1.3.6.1.4.1.33.17.2.1.1.12 | ColumnrepeaterGroupManagerRepeater | read-write | mandatory | The logical repeater to which the manager card, if present, is attached. |
| 1.3.6.1.4.1.33.17.2.1.1.13 | ColumnrepeaterGroupFifoErrors | read-only | mandatory | This variable will reflect the number of times that the report FIFO has gone out of synchronization. |
| 1.3.6.1.4.1.33.17.2.1.1.14 | ColumnrepeaterGroupCpuUtilization | read-only | mandatory | The average CPU utilization for the processor which maintains statistics and implements monitoring for the group, expressed as percentage times 100. |
| 1.3.6.1.4.1.33.17.2.1.1.15 | ColumnrepeaterGroupMemoryUtilization | read-only | mandatory | The current memory utilization for the processor which maintains statistics and implements monitoring for the group, expressed as percentage used times 100. |
| 1.3.6.1.4.1.33.17.2.1.1.16 | ColumnrepeaterGroupAlarmCount | read-only | mandatory | The number of alarms currently being monitored by the processor for comparison with RMON thresholds. |
| 1.3.6.1.4.1.33.17.3 | NoderedundancyPathChange | This trap issued to indicate that a redundancy group has experienced a path change. The offending group and the new path are included in the trap. | ||
| 1.3.6.1.4.1.33.17.3 | NodexRepeaterPortInfo | |||
| 1.3.6.1.4.1.33.17.3.1 | TablerepeaterPortTable | not-accessible | mandatory | Table of descriptive and status information about the ports. |
| 1.3.6.1.4.1.33.17.3.1.1 | RowrepeaterPortEntry | not-accessible | mandatory | An entry in the table, containing information about a port. |
| 1.3.6.1.4.1.33.17.3.1.1.1 | ColumnrepeaterPortGroupIndex | read-only | mandatory | This variable identifies the group containing the port for which this entry contains infromation. |
| 1.3.6.1.4.1.33.17.3.1.1.2 | ColumnrepeaterPortIndex | read-only | mandatory | This variable identifies the port within the group within the repeater for which this entry contains management information. This value can never be greater th… |
| 1.3.6.1.4.1.33.17.3.1.1.3 | ColumnrepeaterPortName | read-write | mandatory | The port's display name. |
| 1.3.6.1.4.1.33.17.3.1.1.4 | ColumnrepeaterPortAutoPolarity | read-write | mandatory | Controls whether the port will automatically determine its polarity. |
| 1.3.6.1.4.1.33.17.3.1.1.5 | ColumnrepeaterPortPolarityDirection | read-only | mandatory | If repeaterPortAutoPolarity is enabled, this is the current polarity of the port. |
| 1.3.6.1.4.1.33.17.3.1.1.6 | ColumnrepeaterPortPulse | read-write | mandatory | Controls whether the port will periodically generate a test pulse to determine the status of the port. |
| 1.3.6.1.4.1.33.17.3.1.1.7 | ColumnrepeaterPortPulseStatus | read-only | mandatory | If repeaterPortPulse is enabled, this is indicates whether the test pulse response is being detected. |
| 1.3.6.1.4.1.33.17.3.1.1.8 | ColumnrepeaterPortPulseLosses | read-only | mandatory | The number of times that a test pulse has been sent and a response was not received. |
| 1.3.6.1.4.1.33.17.3.1.1.9 | ColumnrepeaterPortDistance | read-write | mandatory | Controls whether the port will support extended distances on the port. |
| 1.3.6.1.4.1.33.17.3.1.1.10 | ColumnrepeaterPortSofMissing | read-only | mandatory | The number of times that alternating zero/one bits were seen after an inter-packet gap and were not followed by two one bits. |
| 1.3.6.1.4.1.33.17.3.1.1.11 | ColumnrepeaterPortMCVs | read-only | mandatory | The number of manchester violation errors detected on this port. |
| 1.3.6.1.4.1.33.17.3.1.1.12 | ColumnrepeaterPortZero | read-write | mandatory | Control to zero the hub port's counters. The agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. |
| 1.3.6.1.4.1.33.17.3.1.1.13 | ColumnrepeaterPortSinceZero | read-only | mandatory | Number of time ticks since the port's counters were zeroed. |
| 1.3.6.1.4.1.33.17.3.1.1.14 | ColumnrepeaterPortAccessAction | read-write | mandatory | Control whether packets will be accepted or discarded if they are in the access list. The inverse action is applied to packets from all addresses not in the li… |
| 1.3.6.1.4.1.33.17.3.1.1.15 | ColumnrepeaterPortAccessState | read-only | mandatory | Indicates whether the port was disabled due to receiving a frame from an invalid source address. |
| 1.3.6.1.4.1.33.17.3.1.1.16 | ColumnrepeaterPortAccessType | read-only | mandatory | Indicates the type of the port. |
| 1.3.6.1.4.1.33.17.3.1.1.17 | ColumnrepeaterPortAccessAllStatus | read-write | mandatory | Setting this field to invalid will delete all access addresses associated with this port. Setting this field to valid has no effect. |
| 1.3.6.1.4.1.33.17.3.1.1.18 | ColumnrepeaterPortPortLastViolationAddress | read-only | mandatory | Address that last caused an access violation. |
| 1.3.6.1.4.1.33.17.3.1.1.19 | ColumnrepeaterPortPortAddressViolations | read-only | mandatory | Number of access violations. |
| 1.3.6.1.4.1.33.17.3.1.1.20 | ColumnrepeaterPortSegment | read-only | mandatory | Returns the indirect mapping of the ethernet repeater to which this port is connected. |
| 1.3.6.1.4.1.33.17.3.1.1.21 | ColumnrepeaterPortAccessLearn | read-write | mandatory | Controls how the port will learn the source addresses that can come in on the port. |
| 1.3.6.1.4.1.33.17.3.1.1.22 | ColumnrepeaterPortEthernetRepeater | read-write | mandatory | For repeaters that implement non-proxy management of logical repeaters, this variable selects the logical Ethernet repeater to which the port is attached. |
| 1.3.6.1.4.1.33.17.3.1.1.23 | ColumnrepeaterPortRepeatersAllowed | read-only | mandatory | The list of repeaters to which this port can be attached. The OCTET STRING contains a bitmap, with a bit for 'none' and one bit for each repeater, and enough o… |
| 1.3.6.1.4.1.33.17.3.1.1.24 | ColumnrepeaterPortGlobalSecurityAddress | read-only | mandatory | This variable represents the global address which is currently applied to the port. |
| 1.3.6.1.4.1.33.17.3.1.1.25 | ColumnrepeaterPortGlobalAddressChanges | read-only | mandatory | This variable represents the number of times since counters have been zeroed, that a global address change occured on the port. |
| 1.3.6.1.4.1.33.17.3.1.1.26 | ColumnrepeaterPortPercentUtilization | read-only | mandatory | This variable will reflect the percentage of a full ethernet load that this port has received since last zeroed. The value is calculated as '(8(bytesReceived +… |
| 1.3.6.1.4.1.33.17.3.2 | TablerepeaterPortAccessTable | not-accessible | mandatory | Table of access control for the ports. |
| 1.3.6.1.4.1.33.17.3.2.1 | RowrepeaterPortAccessEntry | not-accessible | mandatory | An entry in the table, containing access information about a port. |
| 1.3.6.1.4.1.33.17.3.2.1.1 | ColumnrepeaterPortAccessGroupIndex | read-only | mandatory | This variable identifies the group containing the access entry for which this entry contains information. The group ID may only be that of the target agent. Sp… |
| 1.3.6.1.4.1.33.17.3.2.1.2 | ColumnrepeaterPortAccessPortIndex | read-only | mandatory | This variable identifies the port containing the access entry for which this entry contains information. |
| 1.3.6.1.4.1.33.17.3.2.1.3 | ColumnrepeaterPortAccessAddress | read-only | mandatory | This value will be compared to the source address of all packets received on the port in applying the access action |
| 1.3.6.1.4.1.33.17.3.2.1.4 | ColumnrepeaterPortAccessStatus | read-write | mandatory | The status of the entry. Set to 'invalid' to remove the rule. |
| 1.3.6.1.4.1.33.17.3.3 | ScalarrepeaterPortAccessGroupIndexShadow | read-write | mandatory | This variable identifies the group which contains a port to which an access address is to be assigned. The group ID may only be that of the target agent. Speci… |
| 1.3.6.1.4.1.33.17.3.4 | ScalarrepeaterPortAccessPortIndexShadow | read-write | mandatory | This variable identifies the port of a group to which an access address is to be assigned. |
| 1.3.6.1.4.1.33.17.3.5 | ScalarrepeaterPortAccessAddressShadow | read-write | mandatory | This value contains the ethernet address which is to be added to the access address table for the port specified by repeaterPortAccessGroupIndexShadow and repe… |
| 1.3.6.1.4.1.33.17.3.6 | ScalarrepeaterPortAccessStatusShadow | read-write | mandatory | When read, this variable will always return 'ready'. When this variable is set to 'execute' the address specified by repeaterPortAccessAddressShadow will be ad… |
| 1.3.6.1.4.1.33.17.3.7 | TablerepeaterPort2Table | not-accessible | mandatory | Table of more descriptive and status information about the ports. |
| 1.3.6.1.4.1.33.17.3.7.1 | RowrepeaterPort2Entry | not-accessible | mandatory | An entry in the table, containing information about a port. Index is identical to repeaterPortTable. |
| 1.3.6.1.4.1.33.17.3.7.1.1 | ColumnrepeaterPort2RmonOctets | read-only | mandatory | The total number of octets of data (including those in bad packets) received on the port (excluding framing bits but including FCS octets). |
| 1.3.6.1.4.1.33.17.3.7.1.2 | ColumnrepeaterPort2RmonPkts | read-only | mandatory | The total number of packets (including error packets) received on the port. |
| 1.3.6.1.4.1.33.17.3.7.1.3 | ColumnrepeaterPort2RmonBroadcastPkts | read-only | mandatory | The total number of good packets received on the port that were directed to the broadcast address. |
| 1.3.6.1.4.1.33.17.3.7.1.4 | ColumnrepeaterPort2RmonMulticastPkts | read-only | mandatory | The total number of good packets received on the port that were directed to a multicast address. Note that this number does not include packets directed to the… |
| 1.3.6.1.4.1.33.17.3.7.1.5 | ColumnrepeaterPort2RmonCRCAlignErrors | read-only | mandatory | The total number of packets received on the port that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive,… |
| 1.3.6.1.4.1.33.17.3.7.1.6 | ColumnrepeaterPort2RmonPkts64Octets | read-only | mandatory | The total number of packets (including error packets) received on the port that were 64 octets in length (excluding framing bits but including FCS octets). |
| 1.3.6.1.4.1.33.17.3.7.1.7 | ColumnrepeaterPort2RmonPkts65to127Octets | read-only | mandatory | The total number of packets (including error packets) received on the port that were between 65 and 127 octets in length inclusive (excluding framing bits but … |
| 1.3.6.1.4.1.33.17.3.7.1.8 | ColumnrepeaterPort2RmonPkts128to255Octets | read-only | mandatory | The total number of packets (including error packets) received on the port that were between 128 and 255 octets in length inclusive (excluding framing bits but… |
| 1.3.6.1.4.1.33.17.3.7.1.9 | ColumnrepeaterPort2RmonPkts256to511Octets | read-only | mandatory | The total number of packets (including error packets) received on the port that were between 256 and 511 octets in length inclusive (excluding framing bits but… |
| 1.3.6.1.4.1.33.17.3.7.1.10 | ColumnrepeaterPort2RmonPkts512to1023Octets | read-only | mandatory | The total number of packets (including error packets) received on the port that were between 512 and 1023 octets in length inclusive (excluding framing bits bu… |
| 1.3.6.1.4.1.33.17.3.7.1.11 | ColumnrepeaterPort2RmonPkts1024to1518Octets | read-only | mandatory | The total number of packets (including error packets) received on the port that were between 1024 and 1518 octets in length inclusive (excluding framing bits b… |
| 1.3.6.1.4.1.33.17.3.7.1.12 | ColumnrepeaterPort2TrafficRatio | read-only | mandatory | The portion of segment bandwidth used by the port over a 5 second interval, expressed as percentage times 100. |
| 1.3.6.1.4.1.33.17.3.7.1.13 | ColumnrepeaterPort2CollisionRatio | read-only | mandatory | The ratio of collisions the port participated in to total packets over a 5 second interval, expressed as percentage times 100. |
| 1.3.6.1.4.1.33.17.3.7.1.14 | ColumnrepeaterPort2ErrorRatio | read-only | mandatory | The ratio of total number of error frames on the port to total packets over a 5 second interval, expressed as percentage times 100. |
| 1.3.6.1.4.1.33.17.3.7.1.15 | ColumnrepeaterPort2BroadcastRatio | read-only | mandatory | The ratio of good packets directed by the port to the broadcast address to total packets over a 5 second interval, expressed as percentage times 100. |
| 1.3.6.1.4.1.33.17.3.7.1.16 | ColumnrepeaterPort2MulticastRatio | read-only | mandatory | The ratio of good packets directed by the port to any multicast address (but not the broadcast address) to total packets over a 5 second interval, expressed as… |
| 1.3.6.1.4.1.33.17.3.7.1.17 | ColumnrepeaterPort2UnicastRatio | read-only | mandatory | The ratio of good packets directed by the port to any address other than a multicast or broadcast address to total packets over a 5 second interval, expressed … |
| 1.3.6.1.4.1.33.17.4 | NodexRepeaterSlotInfo | |||
| 1.3.6.1.4.1.33.17.4.1 | TablerepeaterSlotSegmentTable | not-accessible | deprecated | Deprecated, no replacement. |
| 1.3.6.1.4.1.33.17.4.1.1 | RowrepeaterSlotSegmentEntry | not-accessible | deprecated | Deprecated, no replacement. |
| 1.3.6.1.4.1.33.17.4.1.1.1 | ColumnrepeaterSlotIndex | read-only | deprecated | Deprecated, no replacement. |
| 1.3.6.1.4.1.33.17.4.1.1.2 | ColumnrepeaterSlotSegment | read-only | deprecated | Deprecated, no replacement. |
| 1.3.6.1.4.1.33.17.4.1.1.3 | ColumnrepeaterSlotSegmentStatus | read-write | deprecated | Deprecated, no replacement. |
| 1.3.6.1.4.1.33.17.5 | NodexRepeaterSecurity | |||
| 1.3.6.1.4.1.33.17.5.1 | ScalarrepeaterSecurityState | read-write | mandatory | Controls whether security operation will be applied to all ports on the repeater. If security is not supported by the device, 'badValue' will be returned if th… |
| 1.3.6.1.4.1.33.17.5.2 | TablerepeaterSecurityPortTable | not-accessible | mandatory | Table of descriptive and status information about the ports. |
| 1.3.6.1.4.1.33.17.5.2.1 | RowrepeaterSecurityPortEntry | not-accessible | mandatory | An entry in the table, containing information about a port. |
| 1.3.6.1.4.1.33.17.5.2.1.1 | ColumnrepeaterSecurityPortUnicast | read-write | mandatory | The action to take when the destination address is unicast and does not have an entry in repeaterSecurityTable. If repeaterPortGroupIndex is equal to the group… |
| 1.3.6.1.4.1.33.17.5.2.1.2 | ColumnrepeaterSecurityPortMulticast | read-write | mandatory | The action to take when the destination address is multicast and does not have an entry in repeaterSecurityTable. If repeaterPortGroupIndex is equal to the gro… |
| 1.3.6.1.4.1.33.17.5.2.1.3 | ColumnrepeaterSecurityPortAllStatus | read-write | mandatory | Setting this field to invalid will delete all security addresses associated with this port. Setting this field to valid has no effect. If repeaterPortGroupInde… |
| 1.3.6.1.4.1.33.17.5.2.1.4 | ColumnrepeaterSecurityPortSecurityLearn | read-write | mandatory | Controls how the port will learn the destination addresses that can be sent to the port. If repeaterPortGroupIndex is equal to the group number of the agent, t… |
| 1.3.6.1.4.1.33.17.5.3 | TablerepeaterSecurityTable | not-accessible | mandatory | Table of security control for the ports. |
| 1.3.6.1.4.1.33.17.5.3.1 | RowrepeaterSecurityEntry | not-accessible | mandatory | An entry in the table, containing security information about a port. |
| 1.3.6.1.4.1.33.17.5.3.1.1 | ColumnrepeaterSecurityGroupIndex | read-only | mandatory | This variable identifies the group containing the security entry for which this entry contains information. The group ID may only be that of the target agent. … |
| 1.3.6.1.4.1.33.17.5.3.1.2 | ColumnrepeaterSecurityPortIndex | read-only | mandatory | This variable identifies the port containing the security entry for which this entry contains infromation. |
| 1.3.6.1.4.1.33.17.5.3.1.3 | ColumnrepeaterSecurityAddress | read-only | mandatory | This value will be compared to the destination address of all packets received on the port in applying the security action. |
| 1.3.6.1.4.1.33.17.5.3.1.4 | ColumnrepeaterSecurityStatus | read-write | mandatory | The status of the entry. Set to 'invalid' to remove the rule. |
| 1.3.6.1.4.1.33.17.5.3.1.5 | ColumnrepeaterSecurityAction | read-write | mandatory | The action to take when the destination address matches. |
| 1.3.6.1.4.1.33.17.5.4 | ScalarrepeaterSecurityGroupIndexShadow | read-write | mandatory | This variable identifies the group containing a port to which a security address is to be assigned. The group ID may only be that of the target agent. Specifyi… |
| 1.3.6.1.4.1.33.17.5.5 | ScalarrepeaterSecurityPortIndexShadow | read-write | mandatory | This variable identifies the port of a group to which a security address is to be assigned. |
| 1.3.6.1.4.1.33.17.5.6 | ScalarrepeaterSecurityAddressShadow | read-write | mandatory | This value contains the ethernet address which is to be added to the security address table for the port specified by repeaterSecurityGroupIndexShadow and repe… |
| 1.3.6.1.4.1.33.17.5.7 | ScalarrepeaterSecurityStatusShadow | read-write | mandatory | When read, this variable will always return 'ready'. When this variable is set to 'execute' the address specified by repeaterSecurityAddressShadow will be adde… |
| 1.3.6.1.4.1.33.17.5.8 | TablerepeaterSecurityGlobalAddressTable | not-accessible | mandatory | Table of ethernet addresses which are applied globally (intra Network 9000 chassis) to ports. |
| 1.3.6.1.4.1.33.17.5.8.1 | RowrepeaterSecurityGlobalAddressEntry | not-accessible | mandatory | An entry in the table containing information about a specific address. |
| 1.3.6.1.4.1.33.17.5.8.1.1 | ColumnrepeaterSecurityGlobalAddress | read-only | mandatory | This variable identifies the address. |
| 1.3.6.1.4.1.33.17.5.8.1.2 | ColumnrepeaterSecurityGlobalAddressStatus | read-write | mandatory | This variable represents the status of the entry. Setting this object (or any other writable object) to 'valid' will cause the row in the table to be created. … |
| 1.3.6.1.4.1.33.17.5.8.1.3 | ColumnrepeaterSecurityGlobalAddressAction | read-write | mandatory | This variable determines the action which is applied to the packet in the event of an address match. The packet is either passed untouched when set to 'pass', … |
| 1.3.6.1.4.1.33.17.5.9 | ScalarrepeaterSecurityGlobalDBID | read-only | mandatory | This variable contains the current version number of the global security database. |
| 1.3.6.1.4.1.33.17.5.10 | ScalarrepeaterSecurityGlobalSecurityAdminState | read-write | mandatory | This variable controls whether global security is enabled or disabled. Global security will not function unless repeaterSecurityState and this variable are bot… |
| 1.3.6.1.4.1.33.17.5.11 | ScalarrepeaterSecurityGlobalSecurityOperState | read-only | mandatory | This variable indicates the operational state of global security. If repeaterSecurityState is set to 'enabled' this variable will reflect the value of repeater… |
| 1.3.6.1.4.1.33.17.6 | NodexRepeaterRepeater | |||
| 1.3.6.1.4.1.33.17.6.1 | TablerepeaterRepeaterTable | not-accessible | mandatory | For repeaters that implement non-proxy management of logical repeaters, a table of descriptive and status information about a logical Ethernet repeater. |
| 1.3.6.1.4.1.33.17.6.1.1 | RowrepeaterRepeaterEntry | not-accessible | mandatory | An entry for a logical Ethernet repeater. |
| 1.3.6.1.4.1.33.17.6.1.1.1 | ColumnrepeaterRepeaterGroupIndex | read-only | mandatory | The slot of the chassis. |
| 1.3.6.1.4.1.33.17.6.1.1.2 | ColumnrepeaterRepeaterIndex | read-only | mandatory | The logical Ethernet repeater within the group. |
| 1.3.6.1.4.1.33.17.6.1.1.3 | ColumnrepeaterRepeaterSegment | read-write | mandatory | The Network 9000 Ethernet network segment to which the logical repeater is attached. |
| 1.3.6.1.4.1.33.17.6.1.1.4 | ColumnrepeaterRepeaterReports | read-write | mandatory | Control for whether statistical reports will be collected for this logical repeater. |
| 1.3.6.1.4.1.33.17.6.1.1.5 | ColumnrepeaterRepeaterCollisions | read-only | mandatory | The number of packet collisions detected on the Ethernet network segment to which this logical repeater is attached. |
| 1.3.6.1.4.1.33.17.6.1.1.6 | ColumnrepeaterRepeaterJabbers | read-only | mandatory | The number of Jabber events detected for this logical repeater. |
| 1.3.6.1.4.1.33.17.6.1.1.7 | ColumnrepeaterRepeaterSQE | read-only | mandatory | The number of SQE failure events detected for this logical repeater. |
| 1.3.6.1.4.1.33.17.6.1.1.8 | ColumnrepeaterRepeaterFifoOverflows | read-only | mandatory | The number of times the report FIFO was full when this logical repeater attemped to write a packet report. |
| 1.3.6.1.4.1.33.17.6.1.1.9 | ColumnrepeaterRepeaterZero | read-write | mandatory | Control for zeroing the logical repeater's counters. The agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting the v… |
| 1.3.6.1.4.1.33.17.6.1.1.10 | ColumnrepeaterRepeaterSinceZero | read-only | mandatory | The number of hundredths of a second since the counters for this logical repeater were last zeroed. This variable is set to zero when repeaterRepeaterZero is w… |
| 1.3.6.1.4.1.33.17.6.1.1.11 | ColumnrepeaterRepeaterSegmentsAllowed | read-only | mandatory | The list of segments to which this repeater can be attached. The OCTET STRING contains a bitmap, with a bit for 'none' and one bit for each segment, and enough… |
| 1.3.6.1.4.1.33.17.6.1.1.12 | ColumnrepeaterRepeaterTotalOctets | read-only | mandatory | This variable will reflect the total number of bytes that the repeater both received from and sent to the segment. Bytes in both good and error frames are coun… |
| 1.3.6.1.4.1.33.17.6.1.1.13 | ColumnrepeaterRepeaterTotalFrames | read-only | mandatory | This variable will reflect the total number of frames that the repeater both received from and sent to the segment. Both good and error frames are counted. |
| 1.3.6.1.4.1.33.17.6.1.1.14 | ColumnrepeaterRepeaterPercentUtilization | read-only | mandatory | This variable will reflect the percentage of a full ethernet load that this repeater has handled since last zeroed. The value is calculated as `(8(totalBytes +… |
| 1.3.6.1.4.1.33.17.7 | NodexRepeaterRedundancy | |||
| 1.3.6.1.4.1.33.17.7.1 | ScalarrepeaterRedundancyState | read-write | mandatory | This variable controls whether hub redundancy is enabled |
| 1.3.6.1.4.1.33.17.7.2 | TablerepeaterRedundancyGroupTable | not-accessible | mandatory | Table of descriptive and status information concerning hub redundancy groups. |
| 1.3.6.1.4.1.33.17.7.2.1 | RowrepeaterRedundancyGroupEntry | not-accessible | mandatory | An entry in the table containing information about a specific hub redundancy group. |
| 1.3.6.1.4.1.33.17.7.2.1.1 | ColumnrepeaterRedundancyGroupGroupIndex | read-only | mandatory | This variable identifies the group. |
| 1.3.6.1.4.1.33.17.7.2.1.2 | ColumnrepeaterRedundancyGroupStatus | read-write | mandatory | This variable represents the status of the entry. Setting this object (or any other writable object) to 'valid' will cause the row in the table to be created. … |
| 1.3.6.1.4.1.33.17.7.2.1.3 | ColumnrepeaterRedundancyGroupName | read-write | mandatory | This variable represents the definable name of the group. Prior to being set, this object will return the default name 'Groupn' where n is the value of repeate… |
| 1.3.6.1.4.1.33.17.7.2.1.4 | ColumnrepeaterRedundancyGroupAdminState | read-write | mandatory | This variable represents the desired state of the group. When this variable is set to 'enabled', the group will be activly monitored for integrity, and back- u… |
| 1.3.6.1.4.1.33.17.7.2.1.5 | ColumnrepeaterRedundancyGroupTestInterval | read-write | mandatory | This variable determines the rate at which testing is performed on the path which is currently active (repeaterRedundancyGroupOperPath) in order to determine i… |
| 1.3.6.1.4.1.33.17.7.2.1.6 | ColumnrepeaterRedundancyGroupRollbackAdminState | read-write | mandatory | This variable represents the desired state of path rollback. Path rollback is defined as the automatic testing and reactivation of higher priority paths. It sh… |
| 1.3.6.1.4.1.33.17.7.2.1.7 | ColumnrepeaterRedundancyGroupRollbackInterval | read-write | mandatory | This variable determines the rate at which rollback testing is performed. The value is in milliseconds. |
| 1.3.6.1.4.1.33.17.7.2.1.8 | ColumnrepeaterRedundancyGroupOperPath | read-only | mandatory | This variable represents the index of the path which is currently being used as the active path. This value may be used as the value for repeaterRedundancyPath… |
| 1.3.6.1.4.1.33.17.7.2.1.9 | ColumnrepeaterRedundancyGroupPathChanges | read-only | mandatory | The value of this variable represents the number of times that this group has changed paths. |
| 1.3.6.1.4.1.33.17.7.2.1.10 | ColumnrepeaterRedundancyGroupRollbackAttempts | read-only | mandatory | The value of this variable represents the number of times that the current path has been interrupted in interest of testing a higher priority path. |
| 1.3.6.1.4.1.33.17.7.2.1.11 | ColumnrepeaterRedundancyGroupZero | read-write | mandatory | This variable is used to zero all counters associated with a group. This variable when read will always read 'ready'. When set to 'execute', all counters assoc… |
| 1.3.6.1.4.1.33.17.7.2.1.12 | ColumnrepeaterRedundancyGroupSinceZero | read-only | mandatory | The value of this variable represents the number of seconds which have elapsed since the counters associated with the group have been zeroed. |
| 1.3.6.1.4.1.33.17.7.2.1.13 | ColumnrepeaterRedundancyGroupConfigStatus | read-only | mandatory | In order for a particular redundancy group to be used by the system, it must have at least one redundancy path defined. This variable indicates whether a redun… |
| 1.3.6.1.4.1.33.17.7.3 | TablerepeaterRedundancyPathTable | not-accessible | mandatory | Table of descriptive and status information concerning hub redundancy paths. |
| 1.3.6.1.4.1.33.17.7.3.1 | RowrepeaterRedundancyPathEntry | not-accessible | mandatory | An entry in the table containing information about a specific hub redundancy path. |
| 1.3.6.1.4.1.33.17.7.3.1.1 | ColumnrepeaterRedundancyPathGroupIndex | read-only | mandatory | This variable identifies the group. |
| 1.3.6.1.4.1.33.17.7.3.1.2 | ColumnrepeaterRedundancyPathPathIndex | read-only | mandatory | This variable identifies the path of the group. |
| 1.3.6.1.4.1.33.17.7.3.1.3 | ColumnrepeaterRedundancyPathStatus | read-write | mandatory | This variable represents the status of the entry. Setting this object (or any other writable object) to 'valid' will cause the row in the table to be created. … |
| 1.3.6.1.4.1.33.17.7.3.1.4 | ColumnrepeaterRedundancyPathSlot | read-write | mandatory | This variable represents the slot of the Network 9000 chassis which contains the repeater on which the path interface resides. |
| 1.3.6.1.4.1.33.17.7.3.1.5 | ColumnrepeaterRedundancyPathPort | read-write | mandatory | This variable represents the port of the repeater to which the path is connected. |
| 1.3.6.1.4.1.33.17.7.3.1.6 | ColumnrepeaterRedundancyPathPriority | read-write | mandatory | This variable represents the order of preferred priority for the path. Lower numbed paths are preferred over higher numbered paths. |
| 1.3.6.1.4.1.33.17.7.3.1.7 | ColumnrepeaterRedundancyPathActivate | read-write | mandatory | This variable is used to immediately make a specific path active. This variable when read will always read 'ready'. When set to 'execute', the selected path wi… |
| 1.3.6.1.4.1.33.17.7.3.1.8 | ColumnrepeaterRedundancyPathTimeout | read-write | mandatory | This variable represents the amount of time in milliseconds that the syatem will wait for test responses from targets on the path. |
| 1.3.6.1.4.1.33.17.7.3.1.9 | ColumnrepeaterRedundancyPathRetryCount | read-write | mandatory | This variable represents the number of times a test is retried on the path in the event of a timeout before the path is considered useless. |
| 1.3.6.1.4.1.33.17.7.3.1.10 | ColumnrepeaterRedundancyPathTestAttempts | read-only | mandatory | The value of this variable represents the number of times that an integrity test was performed on the path. |
| 1.3.6.1.4.1.33.17.7.3.1.11 | ColumnrepeaterRedundancyPathLastTestStatus | read-only | mandatory | This variable indicates the result of the last test of the path. 'notTested' indicates that the path has yet to be tested. 'responded' indicates that a target … |
| 1.3.6.1.4.1.33.17.7.3.1.12 | ColumnrepeaterRedundancyPathDisposition | read-write | mandatory | This variable controls the action that will be taken when a path is considered bad. 'disable' indicates that the path is to be disabled prior to switching to a… |
| 1.3.6.1.4.1.33.17.7.3.1.13 | ColumnrepeaterRedundancyPathConfigStatus | read-only | mandatory | In order for a particular redundancy path to be used by the system, it must have at least one target address and the slot and the port on which it originates d… |
| 1.3.6.1.4.1.33.17.7.3.1.14 | ColumnrepeaterRedundancyPathAdminState | read-write | mandatory | This variable represents the desired state of the path. When this variable is set to 'disabled' the path will not be used by the group. When set to 'enabled', … |
| 1.3.6.1.4.1.33.17.7.4 | TablerepeaterRedundancyAddressTable | not-accessible | mandatory | Table of descriptive and status information concerning hub redundancy target addresses. |
| 1.3.6.1.4.1.33.17.7.4.1 | RowrepeaterRedundancyAddressEntry | not-accessible | mandatory | An entry in the table containing information about a specific target address associated with a hub redundancy path. |
| 1.3.6.1.4.1.33.17.7.4.1.1 | ColumnrepeaterRedundancyAddressGroupIndex | read-only | mandatory | This variable identifies the group. |
| 1.3.6.1.4.1.33.17.7.4.1.2 | ColumnrepeaterRedundancyAddressPathIndex | read-only | mandatory | This variable identifies the path of the group. |
| 1.3.6.1.4.1.33.17.7.4.1.3 | ColumnrepeaterRedundancyAddressAddress | read-only | mandatory | This variable identifies the specific target address. |
| 1.3.6.1.4.1.33.17.7.4.1.4 | ColumnrepeaterRedundancyAddressStatus | read-write | mandatory | This variable represents the status of the entry. Setting this object (or any other writable object) to 'valid' will cause the row in the table to be created. … |
| 1.3.6.1.4.1.33.17.7.4.1.5 | ColumnrepeaterRedundancyAddressResponses | read-only | mandatory | This value of this variable represents the number of times this specific address has responded to a test attempt. |
| 1.3.6.1.4.1.33.17.7.4.1.6 | ColumnrepeaterRedundancyAddressLastTestStatus | read-only | mandatory | This variable indicates whether this particular address responded to the last test of the path. 'notTested' indicates that the path has yet to be tested. 'resp… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Repeater | INTEGER { notApplicable(1), repeater1(2), repeater2(3), repeater3(4) } | ||
| Segment | INTEGER { a(1), b(2), c(3), d(4), e(5), f(6), g(7), h(8), i(9), j(10), k(11), l(12), m(13), n(14), o(15), p(16), q(17), r(18), s(19), t(20), u(21), v(22), w(23), x(24), y(25), z(26), disabled(27), notApplicable(28) } |