ITOUCH-RMON-MIB
56 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.33.31 | NodexRmon | |||
| 1.3.6.1.4.1.33.31.1 | NodeiTouchAlarm | The SNMP trap that is generated when xRmonTrapType is set to iTouchFormat(2). These traps, like the RMON standardFormat(1) traps, occur when an alarm variable … | ||
| 1.3.6.1.4.1.33.31.1 | NodexRmonMonitor | |||
| 1.3.6.1.4.1.33.31.1.1 | ScalarxRmonMonitorRemote | read-only | mandatory | Once an alarm is 'completed', monitoring for that variable may be distributed within an enclosure to another processor. Factors affecting this decision include… |
| 1.3.6.1.4.1.33.31.1.2 | ScalarxRmonMonitorLocal | read-only | mandatory | Once an alarm is 'completed', monitoring for that variable may be distributed within an enclosure to another processor. Factors affecting this decision include… |
| 1.3.6.1.4.1.33.31.1.3 | ScalarxRmonLogClear | read-write | mandatory | Set this field to 'execute' to delete all RMON log table entries. Setting to 'ready' has no effect. |
| 1.3.6.1.4.1.33.31.1.4 | ScalarxRmonLogTotal | read-only | mandatory | This field reports the total number of RMON log entries created since the system was initialized. Clearing the log table does not change this value. |
| 1.3.6.1.4.1.33.31.1.5 | ScalarxRmonLogLastDateTime | read-only | mandatory | The local date and time of the system at the time an RMON log entry was last created. |
| 1.3.6.1.4.1.33.31.1.6 | ScalarxRmonTrapType | read-write | mandatory | Use this field to specify the type of SNMP trap to generate when an alarm event occurs. The value 'standardFormat' formats the trap as a standard, RMON-complia… |
| 1.3.6.1.4.1.33.31.1.7 | ScalarxRmonRepeaterManagement | read-write | mandatory | This field enables and disables RMON monitoring of certain repeater related variables in the chassis. Set this field to 'enabled' to allow this slot to activat… |
| 1.3.6.1.4.1.33.31.1.8 | ScalarxRmonAlarmActivate | read-write | mandatory | Use this field to change the states of all completed alarms to 'active' or 'inactive'. Select 'activateAll' to make all completed alarms not in the 'active' st… |
| 1.3.6.1.4.1.33.31.1.9 | ScalarxRmonAlarmClear | read-write | mandatory | Set this field to 'deleteAll' to delete all alarm table entries and their associated event entries. Setting to 'noAction' has no effect. |
| 1.3.6.1.4.1.33.31.1.10 | NodexRmonAlarmCount | |||
| 1.3.6.1.4.1.33.31.1.10.1 | ScalarxRmonAlarmsIncomplete | read-only | mandatory | This value represents the number of alarms that are not completed. Completing these alarms will make them active. |
| 1.3.6.1.4.1.33.31.1.10.2 | ScalarxRmonAlarmsActive | read-only | mandatory | This value represents the number of alarms whose state is 'active'. These are completed alarms which are actively monitored. |
| 1.3.6.1.4.1.33.31.1.10.3 | ScalarxRmonAlarmsHeld | read-only | mandatory | This value represents the number of alarms whose state is 'held'. These are completed alarms which will not be actively monitored because the Repeater Manageme… |
| 1.3.6.1.4.1.33.31.1.10.4 | ScalarxRmonAlarmsOther | read-only | mandatory | This value represents the number of completed alarms that are not 'active' and not 'held'. Monitoring is not active for these alarms. |
| 1.3.6.1.4.1.33.31.1.11 | ScalarxRmonAlarmInitAction | read-write | mandatory | Use this field to specify whether all alarms read from the parameter file should be placed in the 'active' state or the 'inactive' state upon system initializa… |
| 1.3.6.1.4.1.33.31.2 | NodexRmonMB | |||
| 1.3.6.1.4.1.33.31.2.1 | NodexRmonMBConfig | |||
| 1.3.6.1.4.1.33.31.2.1.1 | ScalarmbAlarmIndex | read-write | mandatory | This field can be either the index of an existing alarm (as seen in the alarm summary view) or a new number to create a new alarm. Specify the index of an exis… |
| 1.3.6.1.4.1.33.31.2.1.2 | ScalarmbAlarmInterval | read-write | mandatory | The interval in seconds over which the variable is sampled and compared with the rising and falling thresholds. If the monitored variable exceeds the limit 2^3… |
| 1.3.6.1.4.1.33.31.2.1.3 | ScalarmbAlarmVariable | read-write | mandatory | This value shows the SNMP object identifier of the variable being sampled. Only variables that have an SNMP 'SYNTAX' of INTEGER, Counter, Gauge, or TimeTicks m… |
| 1.3.6.1.4.1.33.31.2.1.4 | ScalarmbAlarmInterpretation | read-write | mandatory | Use this field when you want to select an alarm variable without specifying its entire SNMP object identifier. First, modify this field by selecting a variable… |
| 1.3.6.1.4.1.33.31.2.1.5 | ScalarmbAlarmKey1Meaning | read-only | mandatory | This field describes how its adjacent key value field will be interpreted when building a complete SNMP object identifier for the alarm variable. The value of … |
| 1.3.6.1.4.1.33.31.2.1.6 | ScalarmbAlarmKey1 | read-write | mandatory | Specify a value here according the the instructions given in its adjacent prompt field. That prompt explains how this field will be used. You may still modify … |
| 1.3.6.1.4.1.33.31.2.1.7 | ScalarmbAlarmKey2Meaning | read-only | mandatory | This field describes how its adjacent key value field will be interpreted when building a complete SNMP object identifier for the alarm variable. The value of … |
| 1.3.6.1.4.1.33.31.2.1.8 | ScalarmbAlarmKey2 | read-write | mandatory | Specify a value here according the the instructions given in its adjacent prompt field. That prompt explains how this field will be used. In some cases, the va… |
| 1.3.6.1.4.1.33.31.2.1.9 | ScalarmbAlarmSampleType | read-write | mandatory | Use this field to select the method of calculating the value to be compared against the thresholds. When you set this to 'absoluteValue', the variable you spec… |
| 1.3.6.1.4.1.33.31.2.1.10 | ScalarmbAlarmValue | read-only | mandatory | This field shows the value of the alarm variable at the end of the most recent monitoring interval. If the alarm sample type is 'changeInValue', it instead sho… |
| 1.3.6.1.4.1.33.31.2.1.11 | ScalarmbAlarmRisingThreshold | read-write | mandatory | This is the rising threshold value for the alarm. When the current alarm value, specified by the alarm sample type, is greater than or equal to this threshold,… |
| 1.3.6.1.4.1.33.31.2.1.12 | ScalarmbAlarmFallingThreshold | read-write | mandatory | This is the falling threshold value for the alarm. When the current alarm value, specified by the alarm sample type, is less than or equal to this threshold, a… |
| 1.3.6.1.4.1.33.31.2.1.13 | ScalarmbAlarmRisingEventType | read-write | mandatory | Use this field to indicate the type of notification to make when the alarm variable exceeds its rising threshold. The default action is to generate both a log … |
| 1.3.6.1.4.1.33.31.2.1.14 | ScalarmbAlarmFallingEventType | read-write | mandatory | Use this field to indicate the type of notification to make when the alarm variable exceeds its falling threshold. The default action is to generate both a log… |
| 1.3.6.1.4.1.33.31.2.1.15 | ScalarmbAlarmSummary | read-only | mandatory | As you make changes to the to alarm settings, this field is filled with an easily readable summary of the alarm parameters. This is to make it easy for you to … |
| 1.3.6.1.4.1.33.31.2.1.16 | ScalarmbAlarmStatus | read-write | mandatory | Describes the current operational state of the alarm and allows you to make limited changes in the state of the alarm for purposes of managing its state. You m… |
| 1.3.6.1.4.1.33.31.2.2 | TablembAlarmTable | not-accessible | mandatory | A list of RMON alarms. This table is indexed by alarmIndex to provide an intuitive mapping between alarms and descriptions. |
| 1.3.6.1.4.1.33.31.2.2.1 | RowmbAlarmEntry | not-accessible | mandatory | A description of an RMON alarm which summarizes the actual RMON alarm and event parameters corresponding to this entry. |
| 1.3.6.1.4.1.33.31.2.2.1.1 | ColumnmbAlarmCondition | read-write | mandatory | Describes the current operational state of the alarm and allows you to make limited changes in the state of the alarm for purposes of managing its state. You m… |
| 1.3.6.1.4.1.33.31.2.2.1.2 | ColumnmbAlarmDescription | read-only | mandatory | An easily-readable summary of an RMON alarm. The general format is: '<action> when <condition> <variable> <key2tag> <key1tag> is >= <r> or <= <f> <interval>.' … |
| 1.3.6.1.4.1.33.31.2.3 | TablembLogTable | not-accessible | mandatory | A list of RMON logTable entries. |
| 1.3.6.1.4.1.33.31.2.3.1 | RowmbLogEntry | not-accessible | mandatory | A human-readable description of an RMON event. |
| 1.3.6.1.4.1.33.31.2.3.1.1 | ColumnmbLogIndex | read-only | mandatory | An index uniquely identifying an entry in this log table. Each such entry describes, in human-readable format, an RMON event occurring for an alarm. All RMON l… |
| 1.3.6.1.4.1.33.31.2.3.1.2 | ColumnmbLogDescription | read-only | mandatory | An easily-readable summary of an RMON log entry. The general format is: '<time>: alarm <index> <condition> <variable> <key2tag> <key1tag> is <limit> <interval>… |
| 1.3.6.1.4.1.33.31.2.4 | TablembResourceTable | not-accessible | mandatory | A list of RMON resource entries. |
| 1.3.6.1.4.1.33.31.2.4.1 | RowmbResourceEntry | not-accessible | mandatory | Values to control and monitor RMON resources. |
| 1.3.6.1.4.1.33.31.2.4.1.1 | ColumnmbResourceType | read-only | mandatory | Identification of an RMON resource type. Typically each type corresponds to an RMON table whose size is to be controlled and monitored. |
| 1.3.6.1.4.1.33.31.2.4.1.2 | ColumnmbResourceCurrent | read-only | mandatory | The number of entries currently allocated by RMON. |
| 1.3.6.1.4.1.33.31.2.4.1.3 | ColumnmbResourceWorst | read-only | mandatory | The highest number of entries ever allocated by RMON since system initialization. |
| 1.3.6.1.4.1.33.31.2.4.1.4 | ColumnmbResourceMaximum | read-write | mandatory | The desired maximum possible number of resources of this type RMON is permitted to use at any one time. Changes to alarm, event, and log entry resource setting… |
| 1.3.6.1.4.1.33.31.2.4.1.5 | ColumnmbResourceOperMaximum | read-only | mandatory | The actual maximum number of resources of this type RMON will attempt to use at any one time. This is the limit in effect for the current system. |
| 1.3.6.1.4.1.33.31.3 | TablexRmonMapTable | not-accessible | mandatory | A list of RMON map entries. |
| 1.3.6.1.4.1.33.31.3.1 | RowxRmonMapEntry | not-accessible | mandatory | Values to create RMON statistics tables for repeater ports. |
| 1.3.6.1.4.1.33.31.3.1.1 | ColumnxRmonMapSlot | read-write | mandatory | The slot the statistics will come from. |
| 1.3.6.1.4.1.33.31.3.1.2 | ColumnxRmonMapPort | read-write | mandatory | The port the statistics will come from. |
| 1.3.6.1.4.1.33.31.3.1.3 | ColumnxRmonMapIfIndex | read-only | mandatory | The interface index (ifIndex) corresponding to this statistics table. |