ITOUCH-X25-MIB
48 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.33.20 | NodexX25 | |||
| 1.3.6.1.4.1.33.20.4 | TablexX25ChannelTable | not-accessible | mandatory | Entries of xX25Channel Table. |
| 1.3.6.1.4.1.33.20.4.1 | RowxX25ChannelEntry | not-accessible | mandatory | Entries of xX25ChannelTable. |
| 1.3.6.1.4.1.33.20.4.1.1 | ColumnxX25ChannelIndex | read-only | mandatory | The ifIndex value for the X.25 physical link. |
| 1.3.6.1.4.1.33.20.4.1.2 | ColumnxX25ChannelLowPVC | read-write | mandatory | Lowest PVC channel. Setting it to zero indicates 'none', and will also set the xX25ChannelHighPVC to zero. If set to a non-zero value and xX25ChannelHighPVC is… |
| 1.3.6.1.4.1.33.20.4.1.3 | ColumnxX25ChannelHighPVC | read-write | mandatory | Highest PVC channel. Setting it to 0 indicates none, and will also set the xX25ChannelLowPVC to 0. If set to a non-zero value and xX25ChannelLowPVC is zero, xX… |
| 1.3.6.1.4.1.33.20.4.1.4 | ColumnxX25ChannelNetwork | read-write | mandatory | The type of network being run. |
| 1.3.6.1.4.1.33.20.4.1.5 | ColumnxX25ChannelMaxPrecedence | read-write | mandatory | The maximum level of IP precedence supported. |
| 1.3.6.1.4.1.33.20.4.1.6 | ColumnxX25ChannelStdVersion | read-write | mandatory | The standard year supported by x25. Values are usually 1980 or 1984 (the default). |
| 1.3.6.1.4.1.33.20.6 | TablexX25VcCfgTable | not-accessible | mandatory | These objects contain information about the virtual circuit configuration in an X.25 PLE. These values are the configured values for circuits that may or may n… |
| 1.3.6.1.4.1.33.20.6.1 | RowxX25VcCfgEntry | not-accessible | mandatory | Entries of the xX25VcCfgTable. |
| 1.3.6.1.4.1.33.20.6.1.1 | ColumnxX25VcCfgIndex | read-only | mandatory | An arbitrary index value for the virtual circuit. |
| 1.3.6.1.4.1.33.20.6.1.2 | ColumnxX25VcCfgPartnerAddr | read-write | mandatory | Partner's X.121 Address. |
| 1.3.6.1.4.1.33.20.6.1.3 | ColumnxX25VcCfgInterfaceIndex | read-write | mandatory | ifIndex of ITouch logical interface associated with this VC. |
| 1.3.6.1.4.1.33.20.6.1.4 | ColumnxX25VcCfgLinkIndex | read-write | mandatory | ifIndex of physical link on which this VC resides. |
| 1.3.6.1.4.1.33.20.6.1.5 | ColumnxX25VcCfgProtocol | read-write | mandatory | Protocol which is being encapsulated by this VC. |
| 1.3.6.1.4.1.33.20.6.1.6 | ColumnxX25VcCfgEncapsulation | read-write | mandatory | Encapsulation method used by this VC. |
| 1.3.6.1.4.1.33.20.6.1.7 | ColumnxX25VcCfgPvc | read-write | mandatory | Channel number if VC is a PVC, else 0. The value must be in the range of xX25ChannelLowPVC to xX25ChannelHighPVC |
| 1.3.6.1.4.1.33.20.6.1.8 | ColumnxX25VcCfgPartnerIpAddress | read-write | mandatory | IP address of the partner over this VC. This must be configured if IP packets will not be MAC-encapsulated. |
| 1.3.6.1.4.1.33.20.6.1.9 | ColumnxX25VcCfgClearFacilities | read-write | mandatory | Control to clear the VC call facilities string. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the … |
| 1.3.6.1.4.1.33.20.6.1.10 | ColumnxX25VcCfgStatus | read-write | mandatory | Setting to 'invalid' removes this VC from the table. If 'valid', setting to 'valid' has no effect, otherwise it creates an entry. |
| 1.3.6.1.4.1.33.20.7 | TablexX25LinkTable | not-accessible | mandatory | These objects contain information about the configuration of the X.25 physical links necessary for the ITouch Bridge/Router. Unless otherwise noted, changes to… |
| 1.3.6.1.4.1.33.20.7.1 | RowxX25LinkEntry | not-accessible | mandatory | Entries of the xX25LinkTable. |
| 1.3.6.1.4.1.33.20.7.1.1 | ColumnxX25LinkIndex | read-only | mandatory | The ifIndex value for a ITouch physical link. |
| 1.3.6.1.4.1.33.20.7.1.2 | ColumnxX25LinkRRDelay | read-write | mandatory | Number of packets received before an RR will be sent. The value must be less than the xX25CallParmInWindowSize. Modifying this object does not require the X.25… |
| 1.3.6.1.4.1.33.20.7.1.3 | ColumnxX25LinkIdleTimeout | read-write | mandatory | Length of time in minutes that a virtual circuit may be idle before the circuit will be cleared. Modifying this object does not require the X.25 physical link … |
| 1.3.6.1.4.1.33.20.7.1.4 | ColumnxX25LinkHoldDownTimer | read-write | mandatory | Length of time in minutes after a virtual circuit has been cleared before it may make a call again. Modifying this object does not require the X.25 physical li… |
| 1.3.6.1.4.1.33.20.7.1.5 | ColumnxX25LinkAccUncfgCalls | read-write | mandatory | Indicates whether unconfigured, non-reverse charged calls will be accepted. Modifying this object does not require the X.25 physical link to be restarted. |
| 1.3.6.1.4.1.33.20.7.1.6 | ColumnxX25LinkDefWindSize | read-write | mandatory | Default packet level window size for this link. |
| 1.3.6.1.4.1.33.20.7.1.7 | ColumnxX25LinkMaxWindSize | read-write | mandatory | Maximum packet level window size for this link. |
| 1.3.6.1.4.1.33.20.7.1.8 | ColumnxX25LinkDefPktSize | read-write | mandatory | Default packet size for this link. |
| 1.3.6.1.4.1.33.20.7.1.9 | ColumnxX25LinkDefThrptClassIn | read-write | mandatory | Default input throughput class for this link. |
| 1.3.6.1.4.1.33.20.7.1.10 | ColumnxX25LinkDefThrptClassOut | read-write | mandatory | Default output throughput class for this link. |
| 1.3.6.1.4.1.33.20.7.1.11 | ColumnxX25LinkDefThrptClassInMsk | read-write | deprecated | Default incoming throughput class mask for this link. |
| 1.3.6.1.4.1.33.20.7.1.12 | ColumnxX25LinkDefThrptClassOutMsk | read-write | deprecated | Default outgoing throughput class mask for this link. |
| 1.3.6.1.4.1.33.20.7.1.13 | ColumnxX25LinkFlowCtrlNeg | read-write | mandatory | Indicates whether flow control negotiation will be performed on this link. |
| 1.3.6.1.4.1.33.20.7.1.14 | ColumnxX25LinkThrptClassNeg | read-write | mandatory | Indicates whether throughput class negotiation will be performed on this link. |
| 1.3.6.1.4.1.33.20.7.1.15 | ColumnxX25LinkICallBarred | read-write | mandatory | Indicates whether incoming calls are barred on this link. |
| 1.3.6.1.4.1.33.20.7.1.16 | ColumnxX25LinkOCallBarred | read-write | mandatory | Indicates whether outgoing calls are barred on this link. |
| 1.3.6.1.4.1.33.20.7.1.17 | ColumnxX25LinkOneOut | read-write | mandatory | Indicates whether the link supports one way outgoing channels. |
| 1.3.6.1.4.1.33.20.7.1.18 | ColumnxX25LinkOneIn | read-write | mandatory | Indicates whether the link supports one way incoming channels. |
| 1.3.6.1.4.1.33.20.7.1.19 | ColumnxX25LinkRevChargeAcc | read-write | mandatory | Indicates whether reverse charge acceptance may be configured on this link. |
| 1.3.6.1.4.1.33.20.7.1.20 | ColumnxX25LinkLocalChargePrevent | read-write | mandatory | Indicates whether local charge prevention may be configured on the link. |
| 1.3.6.1.4.1.33.20.7.1.21 | ColumnxX25LinkRpoa | read-write | mandatory | Indicates whether RPOA may be configured on the link. |
| 1.3.6.1.4.1.33.20.7.1.22 | ColumnxX25LinkNui | read-write | mandatory | Indicates whether NUI may be configured on the link. |
| 1.3.6.1.4.1.33.20.7.1.23 | ColumnxX25LinkMaxPacketSize | read-write | mandatory | Maximum size of packets on the link. |
| 1.3.6.1.4.1.33.20.7.1.24 | ColumnxX25LinkInsertCallingAddr | read-write | mandatory | Indicates whether the caller's X.121 address should be inserted into the the call request packet. |
| 1.3.6.1.4.1.33.20.7.1.25 | ColumnxX25LinkDefaultInterface | read-write | mandatory | The ITouch logical ifIndex to which new SVCs should be attached, when 'accept unconfigured calls' is enabled. A value of zero means 'create a new interface'. |