ITOUCHHUB
2754 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IMPORTS OBJECT-TYPE IpAddress NetworkAddress TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 0.0 | ScalarcharPortHardware | read-only | mandatory | |
| 0.0 | ScalarcharSessConnectionId | read-only | mandatory | |
| 0.0 | NodenullConnectionId | |||
| 0.0 | NodenullHardware | |||
| 1.3.6.1.2.1 | Nodemib-2 | |||
| 1.3.6.1.2.1.1 | Nodesystem | |||
| 1.3.6.1.2.1.1.1 | ScalarsysDescr | read-only | mandatory | A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-syste… |
| 1.3.6.1.2.1.1.2 | ScalarsysObjectID | read-only | mandatory | The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtr… |
| 1.3.6.1.2.1.1.3 | ScalarsysUpTime | read-only | mandatory | The time (in hundredths of a second) since the network management portion of the system was last re-initialized. |
| 1.3.6.1.2.1.1.4 | ScalarsysContact | read-write | mandatory | The textual identification of the contact person for this managed node, together with information on how to contact this person. |
| 1.3.6.1.2.1.1.5 | ScalarsysName | read-write | mandatory | An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. |
| 1.3.6.1.2.1.1.6 | ScalarsysLocation | read-write | mandatory | The physical location of this node (e.g., `telephone closet, 3rd floor'). |
| 1.3.6.1.2.1.1.7 | ScalarsysServices | read-only | mandatory | A value which indicates the set of services that this entity primarily offers. The value is a sum. This sum initially takes the value zero, Then, for each laye… |
| 1.3.6.1.2.1.2 | Nodeinterfaces | |||
| 1.3.6.1.2.1.2.1 | ScalarifNumber | read-only | mandatory | The number of network interfaces (regardless of their current state) present on this system. |
| 1.3.6.1.2.1.2.2 | TableifTable | not-accessible | mandatory | A list of interface entries. The number of entries is given by the value of ifNumber. |
| 1.3.6.1.2.1.2.2.1 | RowifEntry | not-accessible | mandatory | An interface entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.2.1.2.2.1.1 | ColumnifIndex | read-only | mandatory | A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re… |
| 1.3.6.1.2.1.2.2.1.2 | ColumnifDescr | read-only | mandatory | A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the h… |
| 1.3.6.1.2.1.2.2.1.3 | ColumnifType | read-only | mandatory | The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack. |
| 1.3.6.1.2.1.2.2.1.4 | ColumnifMtu | read-only | mandatory | The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagr… |
| 1.3.6.1.2.1.2.2.1.5 | ColumnifSpeed | read-only | mandatory | An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation ca… |
| 1.3.6.1.2.1.2.2.1.6 | ColumnifPhysAddress | read-only | mandatory | The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.… |
| 1.3.6.1.2.1.2.2.1.7 | ColumnifAdminStatus | read-write | mandatory | The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.2.1.2.2.1.8 | ColumnifOperStatus | read-only | mandatory | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.2.1.2.2.1.9 | ColumnifLastChange | read-only | mandatory | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization o… |
| 1.3.6.1.2.1.2.2.1.10 | ColumnifInOctets | read-only | mandatory | The total number of octets received on the interface, including framing characters. |
| 1.3.6.1.2.1.2.2.1.11 | ColumnifInUcastPkts | read-only | mandatory | The number of subnetwork-unicast packets delivered to a higher-layer protocol. |
| 1.3.6.1.2.1.2.2.1.12 | ColumnifInNUcastPkts | read-only | mandatory | The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. |
| 1.3.6.1.2.1.2.2.1.13 | ColumnifInDiscards | read-only | mandatory | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.2.1.2.2.1.14 | ColumnifInErrors | read-only | mandatory | The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
| 1.3.6.1.2.1.2.2.1.15 | ColumnifInUnknownProtos | read-only | mandatory | The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.2.1.2.2.1.16 | ColumnifOutOctets | read-only | mandatory | The total number of octets transmitted out of the interface, including framing characters. |
| 1.3.6.1.2.1.2.2.1.17 | ColumnifOutUcastPkts | read-only | mandatory | The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not se… |
| 1.3.6.1.2.1.2.2.1.18 | ColumnifOutNUcastPkts | read-only | mandatory | The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) addre… |
| 1.3.6.1.2.1.2.2.1.19 | ColumnifOutDiscards | read-only | mandatory | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.2.1.2.2.1.20 | ColumnifOutErrors | read-only | mandatory | The number of outbound packets that could not be transmitted because of errors. |
| 1.3.6.1.2.1.2.2.1.21 | ColumnifOutQLen | read-only | mandatory | The length of the output packet queue (in packets). |
| 1.3.6.1.2.1.2.2.1.22 | ColumnifSpecific | read-only | mandatory | A reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interface is realized by an ethernet, … |
| 1.3.6.1.2.1.3 | Nodeat | |||
| 1.3.6.1.2.1.3.1 | TableatTable | not-accessible | deprecated | The Address Translation tables contain the NetworkAddress to `physical' address equivalences. Some interfaces do not use translation tables for determining add… |
| 1.3.6.1.2.1.3.1.1 | RowatEntry | not-accessible | deprecated | Each entry contains one NetworkAddress to `physical' address equivalence. |
| 1.3.6.1.2.1.3.1.1.1 | ColumnatIfIndex | read-write | deprecated | The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified … |
| 1.3.6.1.2.1.3.1.1.2 | ColumnatPhysAddress | read-write | deprecated | The media-dependent `physical' address. Setting this object to a null string (one of zero length) has the effect of invaliding the corresponding entry in the a… |
| 1.3.6.1.2.1.3.1.1.3 | ColumnatNetAddress | read-write | deprecated | The NetworkAddress (e.g., the IP address) corresponding to the media-dependent `physical' address. |
| 1.3.6.1.2.1.4 | Nodeip | |||
| 1.3.6.1.2.1.4.1 | ScalaripForwarding | read-write | mandatory | The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP g… |
| 1.3.6.1.2.1.4.2 | ScalaripDefaultTTL | read-write | mandatory | The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the tra… |
| 1.3.6.1.2.1.4.3 | ScalaripInReceives | read-only | mandatory | The total number of input datagrams received from interfaces, including those received in error. |
| 1.3.6.1.2.1.4.4 | ScalaripInHdrErrors | read-only | mandatory | The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live … |
| 1.3.6.1.2.1.4.5 | ScalaripInAddrErrors | read-only | mandatory | The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. Th… |
| 1.3.6.1.2.1.4.6 | ScalaripForwDatagrams | read-only | mandatory | The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward the… |
| 1.3.6.1.2.1.4.7 | ScalaripInUnknownProtos | read-only | mandatory | The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.2.1.4.8 | ScalaripInDiscards | read-only | mandatory | The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buff… |
| 1.3.6.1.2.1.4.9 | ScalaripInDelivers | read-only | mandatory | The total number of input datagrams successfully delivered to IP user-protocols (including ICMP). |
| 1.3.6.1.2.1.4.10 | ScalaripOutRequests | read-only | mandatory | The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not in… |
| 1.3.6.1.2.1.4.11 | ScalaripOutDiscards | read-only | mandatory | The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for … |
| 1.3.6.1.2.1.4.12 | ScalaripOutNoRoutes | read-only | mandatory | The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted… |
| 1.3.6.1.2.1.4.13 | ScalaripReasmTimeout | read-only | mandatory | The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity. |
| 1.3.6.1.2.1.4.14 | ScalaripReasmReqds | read-only | mandatory | The number of IP fragments received which needed to be reassembled at this entity. |
| 1.3.6.1.2.1.4.15 | ScalaripReasmOKs | read-only | mandatory | The number of IP datagrams successfully re- assembled. |
| 1.3.6.1.2.1.4.16 | ScalaripReasmFails | read-only | mandatory | The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of di… |
| 1.3.6.1.2.1.4.17 | ScalaripFragOKs | read-only | mandatory | The number of IP datagrams that have been successfully fragmented at this entity. |
| 1.3.6.1.2.1.4.18 | ScalaripFragFails | read-only | mandatory | The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment fl… |
| 1.3.6.1.2.1.4.19 | ScalaripFragCreates | read-only | mandatory | The number of IP datagram fragments that have been generated as a result of fragmentation at this entity. |
| 1.3.6.1.2.1.4.20 | TableipAddrTable | not-accessible | mandatory | The table of addressing information relevant to this entity's IP addresses. |
| 1.3.6.1.2.1.4.20.1 | RowipAddrEntry | not-accessible | mandatory | The addressing information for one of this entity's IP addresses. |
| 1.3.6.1.2.1.4.20.1.1 | ColumnipAdEntAddr | read-only | mandatory | The IP address to which this entry's addressing information pertains. |
| 1.3.6.1.2.1.4.20.1.2 | ColumnipAdEntIfIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.2.1.4.20.1.3 | ColumnipAdEntNetMask | read-only | mandatory | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.2.1.4.20.1.4 | ColumnipAdEntBcastAddr | read-only | mandatory | The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this… |
| 1.3.6.1.2.1.4.20.1.5 | ColumnipAdEntReasmMaxSize | read-only | mandatory | The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface. |
| 1.3.6.1.2.1.4.21 | TableipRouteTable | not-accessible | mandatory | This entity's IP Routing table. |
| 1.3.6.1.2.1.4.21.1 | RowipRouteEntry | not-accessible | mandatory | A route to a particular destination. |
| 1.3.6.1.2.1.4.21.1.1 | ColumnipRouteDest | read-write | mandatory | The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in… |
| 1.3.6.1.2.1.4.21.1.2 | ColumnipRouteIfIndex | read-write | mandatory | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu… |
| 1.3.6.1.2.1.4.21.1.3 | ColumnipRouteMetric1 | read-write | mandatory | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If … |
| 1.3.6.1.2.1.4.21.1.4 | ColumnipRouteMetric2 | read-write | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If… |
| 1.3.6.1.2.1.4.21.1.5 | ColumnipRouteMetric3 | read-write | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If… |
| 1.3.6.1.2.1.4.21.1.6 | ColumnipRouteMetric4 | read-write | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If… |
| 1.3.6.1.2.1.4.21.1.7 | ColumnipRouteNextHop | read-write | mandatory | The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is… |
| 1.3.6.1.2.1.4.21.1.8 | ColumnipRouteType | read-write | mandatory | The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this objec… |
| 1.3.6.1.2.1.4.21.1.9 | ColumnipRouteProto | read-only | mandatory | The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th… |
| 1.3.6.1.2.1.4.21.1.10 | ColumnipRouteAge | read-write | mandatory | The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except throug… |
| 1.3.6.1.2.1.4.21.1.11 | ColumnipRouteMask | read-write | mandatory | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not s… |
| 1.3.6.1.2.1.4.21.1.12 | ColumnipRouteMetric5 | read-write | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If… |
| 1.3.6.1.2.1.4.21.1.13 | ColumnipRouteInfo | read-only | mandatory | A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the rou… |
| 1.3.6.1.2.1.4.22 | TableipNetToMediaTable | not-accessible | mandatory | The IP Address Translation table used for mapping from IP addresses to physical addresses. |
| 1.3.6.1.2.1.4.22.1 | RowipNetToMediaEntry | not-accessible | mandatory | Each entry contains one IpAddress to `physical' address equivalence. |
| 1.3.6.1.2.1.4.22.1.1 | ColumnipNetToMediaIfIndex | read-write | mandatory | The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified … |
| 1.3.6.1.2.1.4.22.1.2 | ColumnipNetToMediaPhysAddress | read-write | mandatory | The media-dependent `physical' address. |
| 1.3.6.1.2.1.4.22.1.3 | ColumnipNetToMediaNetAddress | read-only | mandatory | The IpAddress corresponding to the media- dependent `physical' address. |
| 1.3.6.1.2.1.4.22.1.4 | ColumnipNetToMediaType | read-write | mandatory | The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it e… |
| 1.3.6.1.2.1.4.23 | ScalaripRoutingDiscards | read-only | mandatory | The number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free-u… |
| 1.3.6.1.2.1.5 | Nodeicmp | |||
| 1.3.6.1.2.1.5.1 | ScalaricmpInMsgs | read-only | mandatory | The total number of ICMP messages which the entity received. Note that this counter includes all those counted by icmpInErrors. |
| 1.3.6.1.2.1.5.2 | ScalaricmpInErrors | read-only | mandatory | The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.). |
| 1.3.6.1.2.1.5.3 | ScalaricmpInDestUnreachs | read-only | mandatory | The number of ICMP Destination Unreachable messages received. |
| 1.3.6.1.2.1.5.4 | ScalaricmpInTimeExcds | read-only | mandatory | The number of ICMP Time Exceeded messages received. |
| 1.3.6.1.2.1.5.5 | ScalaricmpInParmProbs | read-only | mandatory | The number of ICMP Parameter Problem messages received. |
| 1.3.6.1.2.1.5.6 | ScalaricmpInSrcQuenchs | read-only | mandatory | The number of ICMP Source Quench messages received. |
| 1.3.6.1.2.1.5.7 | ScalaricmpInRedirects | read-only | mandatory | The number of ICMP Redirect messages received. |
| 1.3.6.1.2.1.5.8 | ScalaricmpInEchos | read-only | mandatory | The number of ICMP Echo (request) messages received. |
| 1.3.6.1.2.1.5.9 | ScalaricmpInEchoReps | read-only | mandatory | The number of ICMP Echo Reply messages received. |
| 1.3.6.1.2.1.5.10 | ScalaricmpInTimestamps | read-only | mandatory | The number of ICMP Timestamp (request) messages received. |
| 1.3.6.1.2.1.5.11 | ScalaricmpInTimestampReps | read-only | mandatory | The number of ICMP Timestamp Reply messages received. |
| 1.3.6.1.2.1.5.12 | ScalaricmpInAddrMasks | read-only | mandatory | The number of ICMP Address Mask Request messages received. |
| 1.3.6.1.2.1.5.13 | ScalaricmpInAddrMaskReps | read-only | mandatory | The number of ICMP Address Mask Reply messages received. |
| 1.3.6.1.2.1.5.14 | ScalaricmpOutMsgs | read-only | mandatory | The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors. |
| 1.3.6.1.2.1.5.15 | ScalaricmpOutErrors | read-only | mandatory | The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include erro… |
| 1.3.6.1.2.1.5.16 | ScalaricmpOutDestUnreachs | read-only | mandatory | The number of ICMP Destination Unreachable messages sent. |
| 1.3.6.1.2.1.5.17 | ScalaricmpOutTimeExcds | read-only | mandatory | The number of ICMP Time Exceeded messages sent. |
| 1.3.6.1.2.1.5.18 | ScalaricmpOutParmProbs | read-only | mandatory | The number of ICMP Parameter Problem messages sent. |
| 1.3.6.1.2.1.5.19 | ScalaricmpOutSrcQuenchs | read-only | mandatory | The number of ICMP Source Quench messages sent. |
| 1.3.6.1.2.1.5.20 | ScalaricmpOutRedirects | read-only | mandatory | The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects. |
| 1.3.6.1.2.1.5.21 | ScalaricmpOutEchos | read-only | mandatory | The number of ICMP Echo (request) messages sent. |
| 1.3.6.1.2.1.5.22 | ScalaricmpOutEchoReps | read-only | mandatory | The number of ICMP Echo Reply messages sent. |
| 1.3.6.1.2.1.5.23 | ScalaricmpOutTimestamps | read-only | mandatory | The number of ICMP Timestamp (request) messages sent. |
| 1.3.6.1.2.1.5.24 | ScalaricmpOutTimestampReps | read-only | mandatory | The number of ICMP Timestamp Reply messages sent. |
| 1.3.6.1.2.1.5.25 | ScalaricmpOutAddrMasks | read-only | mandatory | The number of ICMP Address Mask Request messages sent. |
| 1.3.6.1.2.1.5.26 | ScalaricmpOutAddrMaskReps | read-only | mandatory | The number of ICMP Address Mask Reply messages sent. |
| 1.3.6.1.2.1.6 | Nodetcp | |||
| 1.3.6.1.2.1.6.1 | ScalartcpRtoAlgorithm | read-only | mandatory | The algorithm used to determine the timeout value used for retransmitting unacknowledged octets. |
| 1.3.6.1.2.1.6.2 | ScalartcpRtoMin | read-only | mandatory | The minimum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type d… |
| 1.3.6.1.2.1.6.3 | ScalartcpRtoMax | read-only | mandatory | The maximum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type d… |
| 1.3.6.1.2.1.6.4 | ScalartcpMaxConn | read-only | mandatory | The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should con… |
| 1.3.6.1.2.1.6.5 | ScalartcpActiveOpens | read-only | mandatory | The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state. |
| 1.3.6.1.2.1.6.6 | ScalartcpPassiveOpens | read-only | mandatory | The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state. |
| 1.3.6.1.2.1.6.7 | ScalartcpAttemptFails | read-only | mandatory | The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of … |
| 1.3.6.1.2.1.6.8 | ScalartcpEstabResets | read-only | mandatory | The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state. |
| 1.3.6.1.2.1.6.9 | ScalartcpCurrEstab | read-only | mandatory | The number of TCP connections for which the current state is either ESTABLISHED or CLOSE- WAIT. |
| 1.3.6.1.2.1.6.10 | ScalartcpInSegs | read-only | mandatory | The total number of segments received, including those received in error. This count includes segments received on currently established connections. |
| 1.3.6.1.2.1.6.11 | ScalartcpOutSegs | read-only | mandatory | The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets. |
| 1.3.6.1.2.1.6.12 | ScalartcpRetransSegs | read-only | mandatory | The total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets. |
| 1.3.6.1.2.1.6.13 | TabletcpConnTable | not-accessible | mandatory | A table containing TCP connection-specific information. |
| 1.3.6.1.2.1.6.13.1 | RowtcpConnEntry | not-accessible | mandatory | Information about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection make… |
| 1.3.6.1.2.1.6.13.1.1 | ColumntcpConnState | read-write | mandatory | The state of this TCP connection. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to retu… |
| 1.3.6.1.2.1.6.13.1.2 | ColumntcpConnLocalAddress | read-only | mandatory | The local IP address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IP interface assoc… |
| 1.3.6.1.2.1.6.13.1.3 | ColumntcpConnLocalPort | read-only | mandatory | The local port number for this TCP connection. |
| 1.3.6.1.2.1.6.13.1.4 | ColumntcpConnRemAddress | read-only | mandatory | The remote IP address for this TCP connection. |
| 1.3.6.1.2.1.6.13.1.5 | ColumntcpConnRemPort | read-only | mandatory | The remote port number for this TCP connection. |
| 1.3.6.1.2.1.6.14 | ScalartcpInErrs | read-only | mandatory | The total number of segments received in error (e.g., bad TCP checksums). |
| 1.3.6.1.2.1.6.15 | ScalartcpOutRsts | read-only | mandatory | The number of TCP segments sent containing the RST flag. |
| 1.3.6.1.2.1.7 | Nodeudp | |||
| 1.3.6.1.2.1.7.1 | ScalarudpInDatagrams | read-only | mandatory | The total number of UDP datagrams delivered to UDP users. |
| 1.3.6.1.2.1.7.2 | ScalarudpNoPorts | read-only | mandatory | The total number of received UDP datagrams for which there was no application at the destination port. |
| 1.3.6.1.2.1.7.3 | ScalarudpInErrors | read-only | mandatory | The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port. |
| 1.3.6.1.2.1.7.4 | ScalarudpOutDatagrams | read-only | mandatory | The total number of UDP datagrams sent from this entity. |
| 1.3.6.1.2.1.7.5 | TableudpTable | not-accessible | mandatory | A table containing UDP listener information. |
| 1.3.6.1.2.1.7.5.1 | RowudpEntry | not-accessible | mandatory | Information about a particular current UDP listener. |
| 1.3.6.1.2.1.7.5.1.1 | ColumnudpLocalAddress | read-only | mandatory | The local IP address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any IP interface associated with the node, t… |
| 1.3.6.1.2.1.7.5.1.2 | ColumnudpLocalPort | read-only | mandatory | The local port number for this UDP listener. |
| 1.3.6.1.2.1.8 | Nodeegp | |||
| 1.3.6.1.2.1.8.1 | ScalaregpInMsgs | read-only | mandatory | The number of EGP messages received without error. |
| 1.3.6.1.2.1.8.2 | ScalaregpInErrors | read-only | mandatory | The number of EGP messages received that proved to be in error. |
| 1.3.6.1.2.1.8.3 | ScalaregpOutMsgs | read-only | mandatory | The total number of locally generated EGP messages. |
| 1.3.6.1.2.1.8.4 | ScalaregpOutErrors | read-only | mandatory | The number of locally generated EGP messages not sent due to resource limitations within an EGP entity. |
| 1.3.6.1.2.1.8.5 | TableegpNeighTable | not-accessible | mandatory | The EGP neighbor table. |
| 1.3.6.1.2.1.8.5.1 | RowegpNeighEntry | not-accessible | mandatory | Information about this entity's relationship with a particular EGP neighbor. |
| 1.3.6.1.2.1.8.5.1.1 | ColumnegpNeighState | read-only | mandatory | The EGP state of the local system with respect to this entry's EGP neighbor. Each EGP state is represented by a value that is one greater than the numerical va… |
| 1.3.6.1.2.1.8.5.1.2 | ColumnegpNeighAddr | read-only | mandatory | The IP address of this entry's EGP neighbor. |
| 1.3.6.1.2.1.8.5.1.3 | ColumnegpNeighAs | read-only | mandatory | The autonomous system of this EGP peer. Zero should be specified if the autonomous system number of the neighbor is not yet known. |
| 1.3.6.1.2.1.8.5.1.4 | ColumnegpNeighInMsgs | read-only | mandatory | The number of EGP messages received without error from this EGP peer. |
| 1.3.6.1.2.1.8.5.1.5 | ColumnegpNeighInErrs | read-only | mandatory | The number of EGP messages received from this EGP peer that proved to be in error (e.g., bad EGP checksum). |
| 1.3.6.1.2.1.8.5.1.6 | ColumnegpNeighOutMsgs | read-only | mandatory | The number of locally generated EGP messages to this EGP peer. |
| 1.3.6.1.2.1.8.5.1.7 | ColumnegpNeighOutErrs | read-only | mandatory | The number of locally generated EGP messages not sent to this EGP peer due to resource limitations within an EGP entity. |
| 1.3.6.1.2.1.8.5.1.8 | ColumnegpNeighInErrMsgs | read-only | mandatory | The number of EGP-defined error messages received from this EGP peer. |
| 1.3.6.1.2.1.8.5.1.9 | ColumnegpNeighOutErrMsgs | read-only | mandatory | The number of EGP-defined error messages sent to this EGP peer. |
| 1.3.6.1.2.1.8.5.1.10 | ColumnegpNeighStateUps | read-only | mandatory | The number of EGP state transitions to the UP state with this EGP peer. |
| 1.3.6.1.2.1.8.5.1.11 | ColumnegpNeighStateDowns | read-only | mandatory | The number of EGP state transitions from the UP state to any other state with this EGP peer. |
| 1.3.6.1.2.1.8.5.1.12 | ColumnegpNeighIntervalHello | read-only | mandatory | The interval between EGP Hello command retransmissions (in hundredths of a second). This represents the t1 timer as defined in RFC 904. |
| 1.3.6.1.2.1.8.5.1.13 | ColumnegpNeighIntervalPoll | read-only | mandatory | The interval between EGP poll command retransmissions (in hundredths of a second). This represents the t3 timer as defined in RFC 904. |
| 1.3.6.1.2.1.8.5.1.14 | ColumnegpNeighMode | read-only | mandatory | The polling mode of this EGP entity, either passive or active. |
| 1.3.6.1.2.1.8.5.1.15 | ColumnegpNeighEventTrigger | read-write | mandatory | A control variable used to trigger operator- initiated Start and Stop events. When read, this variable always returns the most recent value that egpNeighEventT… |
| 1.3.6.1.2.1.8.6 | ScalaregpAs | read-only | mandatory | The autonomous system number of this EGP entity. |
| 1.3.6.1.2.1.10 | Nodetransmission | |||
| 1.3.6.1.2.1.10.5 | Nodex25 | |||
| 1.3.6.1.2.1.10.5.1 | Tablex25AdmnTable | not-accessible | mandatory | This table contains the administratively set configuration parameters for an X.25 Packet Level Entity (PLE). Most of the objects in this table have correspondi… |
| 1.3.6.1.2.1.10.5.1 | Nodex25Restart | This trap means the X.25 PLE sent or received a restart packet. The restart that brings up the link should not send a x25Restart trap so the interface should s… | ||
| 1.3.6.1.2.1.10.5.1.1 | Rowx25AdmnEntry | not-accessible | mandatory | Entries of x25AdmnTable. |
| 1.3.6.1.2.1.10.5.1.1.1 | Columnx25AdmnIndex | read-only | mandatory | The ifIndex value for the X.25 Interface. |
| 1.3.6.1.2.1.10.5.1.1.2 | Columnx25AdmnInterfaceMode | read-write | mandatory | Identifies DCE/DTE mode in which the interface operates. A value of dxe indicates the mode will be determined by XID negotiation. |
| 1.3.6.1.2.1.10.5.1.1.3 | Columnx25AdmnMaxActiveCircuits | read-write | mandatory | The maximum number of circuits this PLE can support; including PVCs. |
| 1.3.6.1.2.1.10.5.1.1.4 | Columnx25AdmnPacketSequencing | read-write | mandatory | The modulus of the packet sequence number space. |
| 1.3.6.1.2.1.10.5.1.1.5 | Columnx25AdmnRestartTimer | read-write | mandatory | The T20 restart timer in milliseconds. |
| 1.3.6.1.2.1.10.5.1.1.6 | Columnx25AdmnCallTimer | read-write | mandatory | The T21 Call timer in milliseconds. |
| 1.3.6.1.2.1.10.5.1.1.7 | Columnx25AdmnResetTimer | read-write | mandatory | The T22 Reset timer in milliseconds. |
| 1.3.6.1.2.1.10.5.1.1.8 | Columnx25AdmnClearTimer | read-write | mandatory | The T23 Clear timer in milliseconds. |
| 1.3.6.1.2.1.10.5.1.1.9 | Columnx25AdmnWindowTimer | read-write | mandatory | The T24 window status transmission timer in milliseconds. A value of 2147483647 indicates no window timer in use. |
| 1.3.6.1.2.1.10.5.1.1.10 | Columnx25AdmnDataRxmtTimer | read-write | mandatory | The T25 data retransmission timer in milliseconds. A value of 2147483647 indicates no data retransmission timer in use. |
| 1.3.6.1.2.1.10.5.1.1.11 | Columnx25AdmnInterruptTimer | read-write | mandatory | The T26 interrupt timer in milliseconds. A value of 2147483647 indicates no interrupt timer in use. |
| 1.3.6.1.2.1.10.5.1.1.12 | Columnx25AdmnRejectTimer | read-write | mandatory | The T27 Reject retransmission timer in milliseconds. A value of 2147483647 indicates no reject timer in use. |
| 1.3.6.1.2.1.10.5.1.1.13 | Columnx25AdmnRegistrationRequestTimer | read-write | mandatory | The T28 registration timer in milliseconds. A value of 2147483647 indicates no registration timer in use. |
| 1.3.6.1.2.1.10.5.1.1.14 | Columnx25AdmnMinimumRecallTimer | read-write | mandatory | Minimum time interval between unsuccessful call attempts in milliseconds. |
| 1.3.6.1.2.1.10.5.1.1.15 | Columnx25AdmnRestartCount | read-write | mandatory | The R20 restart retransmission count. |
| 1.3.6.1.2.1.10.5.1.1.16 | Columnx25AdmnResetCount | read-write | mandatory | The r22 Reset retransmission count. |
| 1.3.6.1.2.1.10.5.1.1.17 | Columnx25AdmnClearCount | read-write | mandatory | The r23 Clear retransmission count. |
| 1.3.6.1.2.1.10.5.1.1.18 | Columnx25AdmnDataRxmtCount | read-write | mandatory | The R25 Data retransmission count. This value is irrelevant if the x25AdmnDataRxmtTimer indicates no timer in use. |
| 1.3.6.1.2.1.10.5.1.1.19 | Columnx25AdmnRejectCount | read-write | mandatory | The R27 reject retransmission count. This value is irrelevant if the x25AdmnRejectTimer indicates no timer in use. |
| 1.3.6.1.2.1.10.5.1.1.20 | Columnx25AdmnRegistrationRequestCount | read-write | mandatory | The R28 Registration retransmission Count. This value is irrelevant if the x25AdmnRegistrationRequestTimer indicates no timer in use. |
| 1.3.6.1.2.1.10.5.1.1.21 | Columnx25AdmnNumberPVCs | read-write | mandatory | The number of PVC configured for this PLE. The PVCs use channel numbers from 1 to this number. |
| 1.3.6.1.2.1.10.5.1.1.22 | Columnx25AdmnDefCallParamId | read-write | mandatory | This identifies the instance of the x25CallParmIndex for the entry in the x25CallParmTable which contains the default call parameters for this PLE. |
| 1.3.6.1.2.1.10.5.1.1.23 | Columnx25AdmnLocalAddress | read-write | mandatory | The local address for this PLE subnetwork. A zero length address maybe returned by PLEs that only support PVCs. |
| 1.3.6.1.2.1.10.5.1.1.24 | Columnx25AdmnProtocolVersionSupported | read-write | mandatory | Identifies the version of the X.25 protocol this interface should support. Object identifiers for common versions are defined below in the x25ProtocolVersion s… |
| 1.3.6.1.2.1.10.5.2 | Tablex25OperTable | not-accessible | mandatory | The operation parameters in use by the X.25 PLE. |
| 1.3.6.1.2.1.10.5.2 | Nodex25Reset | If the PLE sends or receives a reset, the agent should send an x25Reset trap. | ||
| 1.3.6.1.2.1.10.5.2.1 | Rowx25OperEntry | not-accessible | mandatory | Entries of x25OperTable. |
| 1.3.6.1.2.1.10.5.2.1.1 | Columnx25OperIndex | read-only | mandatory | The ifIndex value for the X.25 interface. |
| 1.3.6.1.2.1.10.5.2.1.2 | Columnx25OperInterfaceMode | read-only | mandatory | Identifies DCE/DTE mode in which the interface operates. A value of dxe indicates the role will be determined by XID negotiation at the Link Layer and that neg… |
| 1.3.6.1.2.1.10.5.2.1.3 | Columnx25OperMaxActiveCircuits | read-only | mandatory | Maximum number of circuits this PLE can support. |
| 1.3.6.1.2.1.10.5.2.1.4 | Columnx25OperPacketSequencing | read-only | mandatory | The modulus of the packet sequence number space. |
| 1.3.6.1.2.1.10.5.2.1.5 | Columnx25OperRestartTimer | read-only | mandatory | The T20 restart timer in milliseconds. |
| 1.3.6.1.2.1.10.5.2.1.6 | Columnx25OperCallTimer | read-only | mandatory | The T21 Call timer in milliseconds. |
| 1.3.6.1.2.1.10.5.2.1.7 | Columnx25OperResetTimer | read-only | mandatory | The T22 Reset timer in milliseconds. |
| 1.3.6.1.2.1.10.5.2.1.8 | Columnx25OperClearTimer | read-only | mandatory | The T23 Clear timer in milliseconds. |
| 1.3.6.1.2.1.10.5.2.1.9 | Columnx25OperWindowTimer | read-only | mandatory | The T24 window status transmission timer milliseconds. A value of 2147483647 indicates no window timer in use. |
| 1.3.6.1.2.1.10.5.2.1.10 | Columnx25OperDataRxmtTimer | read-only | mandatory | The T25 Data Retransmission timer in milliseconds. A value of 2147483647 indicates no data retransmission timer in use. |
| 1.3.6.1.2.1.10.5.2.1.11 | Columnx25OperInterruptTimer | read-only | mandatory | The T26 Interrupt timer in milliseconds. A value of 2147483647 indicates interrupts are not being used. |
| 1.3.6.1.2.1.10.5.2.1.12 | Columnx25OperRejectTimer | read-only | mandatory | The T27 Reject retransmission timer in milliseconds. A value of 2147483647 indicates no reject timer in use. |
| 1.3.6.1.2.1.10.5.2.1.13 | Columnx25OperRegistrationRequestTimer | read-only | mandatory | The T28 registration timer in milliseconds. A value of 2147483647 indicates no registration timer in use. |
| 1.3.6.1.2.1.10.5.2.1.14 | Columnx25OperMinimumRecallTimer | read-only | mandatory | Minimum time interval between unsuccessful call attempts in milliseconds. |
| 1.3.6.1.2.1.10.5.2.1.15 | Columnx25OperRestartCount | read-only | mandatory | The R20 restart retransmission count. |
| 1.3.6.1.2.1.10.5.2.1.16 | Columnx25OperResetCount | read-only | mandatory | The r22 Reset retransmission count. |
| 1.3.6.1.2.1.10.5.2.1.17 | Columnx25OperClearCount | read-only | mandatory | The r23 Clear retransmission count. |
| 1.3.6.1.2.1.10.5.2.1.18 | Columnx25OperDataRxmtCount | read-only | mandatory | The R25 Data retransmission count. This value is undefined if the x25OperDataRxmtTimer indicates no timer in use. |
| 1.3.6.1.2.1.10.5.2.1.19 | Columnx25OperRejectCount | read-only | mandatory | The R27 reject retransmission count. This value is undefined if the x25OperRejectTimer indicates no timer in use. |
| 1.3.6.1.2.1.10.5.2.1.20 | Columnx25OperRegistrationRequestCount | read-only | mandatory | The R28 Registration retransmission Count. This value is undefined if the x25OperREgistrationRequestTimer indicates no timer in use. |
| 1.3.6.1.2.1.10.5.2.1.21 | Columnx25OperNumberPVCs | read-only | mandatory | The number of PVC configured for this PLE. The PVCs use channel numbers from 1 to this number. |
| 1.3.6.1.2.1.10.5.2.1.22 | Columnx25OperDefCallParamId | read-only | mandatory | This identifies the instance of the x25CallParmIndex for the entry in the x25CallParmTable that contains the default call parameters for this PLE. |
| 1.3.6.1.2.1.10.5.2.1.23 | Columnx25OperLocalAddress | read-only | mandatory | The local address for this PLE subnetwork. A zero length address maybe returned by PLEs that only support PVCs. |
| 1.3.6.1.2.1.10.5.2.1.24 | Columnx25OperDataLinkId | read-only | mandatory | This identifies the instance of the index object in the first table of the most device specific MIB for the interface used by this PLE. |
| 1.3.6.1.2.1.10.5.2.1.25 | Columnx25OperProtocolVersionSupported | read-only | mandatory | Identifies the version of the X.25 protocol this interface supports. Object identifiers for common versions are defined below in the x25ProtocolVersion subtree. |
| 1.3.6.1.2.1.10.5.3 | Tablex25StatTable | not-accessible | mandatory | Statistics information about this X.25 PLE. |
| 1.3.6.1.2.1.10.5.3.1 | Rowx25StatEntry | not-accessible | mandatory | Entries of the x25StatTable. |
| 1.3.6.1.2.1.10.5.3.1.1 | Columnx25StatIndex | read-only | mandatory | The ifIndex value for the X.25 interface. |
| 1.3.6.1.2.1.10.5.3.1.2 | Columnx25StatInCalls | read-only | mandatory | The number of incoming calls received. |
| 1.3.6.1.2.1.10.5.3.1.3 | Columnx25StatInCallRefusals | read-only | mandatory | The number of incoming calls refused. This includes calls refused by the PLE and by higher layers. This also includes calls cleared because of restricted fast … |
| 1.3.6.1.2.1.10.5.3.1.4 | Columnx25StatInProviderInitiatedClears | read-only | mandatory | The number of clear requests with a cause code other than DTE initiated. |
| 1.3.6.1.2.1.10.5.3.1.5 | Columnx25StatInRemotelyInitiatedResets | read-only | mandatory | The number of reset requests received with cause code DTE initiated. |
| 1.3.6.1.2.1.10.5.3.1.6 | Columnx25StatInProviderInitiatedResets | read-only | mandatory | The number of reset requests received with cause code other than DTE initiated. |
| 1.3.6.1.2.1.10.5.3.1.7 | Columnx25StatInRestarts | read-only | mandatory | The number of remotely initiated (including provider initiated) restarts experienced by the PLE excluding the restart associated with bringing up the PLE inter… |
| 1.3.6.1.2.1.10.5.3.1.8 | Columnx25StatInDataPackets | read-only | mandatory | The number of data packets received. |
| 1.3.6.1.2.1.10.5.3.1.9 | Columnx25StatInAccusedOfProtocolErrors | read-only | mandatory | The number of packets received containing a procedure error cause code. These include clear, reset, restart, or diagnostic packets. |
| 1.3.6.1.2.1.10.5.3.1.10 | Columnx25StatInInterrupts | read-only | mandatory | The number of interrupt packets received by the PLE or over the PVC/VC. |
| 1.3.6.1.2.1.10.5.3.1.11 | Columnx25StatOutCallAttempts | read-only | mandatory | The number of calls attempted. |
| 1.3.6.1.2.1.10.5.3.1.12 | Columnx25StatOutCallFailures | read-only | mandatory | The number of call attempts which failed. This includes calls that were cleared because of restrictive fast select. |
| 1.3.6.1.2.1.10.5.3.1.13 | Columnx25StatOutInterrupts | read-only | mandatory | The number of interrupt packets send by the PLE or over the PVC/VC. |
| 1.3.6.1.2.1.10.5.3.1.14 | Columnx25StatOutDataPackets | read-only | mandatory | The number of data packets sent by this PLE. |
| 1.3.6.1.2.1.10.5.3.1.15 | Columnx25StatOutgoingCircuits | read-only | mandatory | The number of active outgoing circuits. This includes call requests sent but not yet confirmed. This does not count PVCs. |
| 1.3.6.1.2.1.10.5.3.1.16 | Columnx25StatIncomingCircuits | read-only | mandatory | The number of active Incoming Circuits. This includes call indications received but not yet acknowledged. This does not count PVCs. |
| 1.3.6.1.2.1.10.5.3.1.17 | Columnx25StatTwowayCircuits | read-only | mandatory | The number of active two-way Circuits. This includes call requests sent but not yet confirmed. This does not count PVCs. |
| 1.3.6.1.2.1.10.5.3.1.18 | Columnx25StatRestartTimeouts | read-only | mandatory | The number of times the T20 restart timer expired. |
| 1.3.6.1.2.1.10.5.3.1.19 | Columnx25StatCallTimeouts | read-only | mandatory | The number of times the T21 call timer expired. |
| 1.3.6.1.2.1.10.5.3.1.20 | Columnx25StatResetTimeouts | read-only | mandatory | The number of times the T22 reset timer expired. |
| 1.3.6.1.2.1.10.5.3.1.21 | Columnx25StatClearTimeouts | read-only | mandatory | The number of times the T23 clear timer expired. |
| 1.3.6.1.2.1.10.5.3.1.22 | Columnx25StatDataRxmtTimeouts | read-only | mandatory | The number of times the T25 data timer expired. |
| 1.3.6.1.2.1.10.5.3.1.23 | Columnx25StatInterruptTimeouts | read-only | mandatory | The number of times the T26 interrupt timer expired. |
| 1.3.6.1.2.1.10.5.3.1.24 | Columnx25StatRetryCountExceededs | read-only | mandatory | The number of times a retry counter was exhausted. |
| 1.3.6.1.2.1.10.5.3.1.25 | Columnx25StatClearCountExceededs | read-only | mandatory | The number of times the R23 clear count was exceeded. |
| 1.3.6.1.2.1.10.5.4 | Tablex25ChannelTable | not-accessible | mandatory | These objects contain information about the channel number configuration in an X.25 PLE. These values are the configured values. changes in these values after … |
| 1.3.6.1.2.1.10.5.4.1 | Rowx25ChannelEntry | not-accessible | mandatory | Entries of x25ChannelTable. |
| 1.3.6.1.2.1.10.5.4.1.1 | Columnx25ChannelIndex | read-only | mandatory | The ifIndex value for the X.25 Interface. |
| 1.3.6.1.2.1.10.5.4.1.2 | Columnx25ChannelLIC | read-write | mandatory | Lowest Incoming channel. |
| 1.3.6.1.2.1.10.5.4.1.3 | Columnx25ChannelHIC | read-write | mandatory | Highest Incoming channel. A value of zero indicates no channels in this range. |
| 1.3.6.1.2.1.10.5.4.1.4 | Columnx25ChannelLTC | read-write | mandatory | Lowest Two-way channel. |
| 1.3.6.1.2.1.10.5.4.1.5 | Columnx25ChannelHTC | read-write | mandatory | Highest Two-way channel. A value of zero indicates no channels in this range. |
| 1.3.6.1.2.1.10.5.4.1.6 | Columnx25ChannelLOC | read-write | mandatory | Lowest outgoing channel. |
| 1.3.6.1.2.1.10.5.4.1.7 | Columnx25ChannelHOC | read-write | mandatory | Highest outgoing channel. A value of zero indicates no channels in this range. |
| 1.3.6.1.2.1.10.5.5 | Tablex25CircuitTable | not-accessible | mandatory | These objects contain general information about a specific circuit of an X.25 PLE. |
| 1.3.6.1.2.1.10.5.5.1 | Rowx25CircuitEntry | not-accessible | mandatory | Entries of x25CircuitTable. |
| 1.3.6.1.2.1.10.5.5.1.1 | Columnx25CircuitIndex | read-only | mandatory | The ifIndex value for the X.25 Interface. |
| 1.3.6.1.2.1.10.5.5.1.2 | Columnx25CircuitChannel | read-only | mandatory | The channel number for this circuit. |
| 1.3.6.1.2.1.10.5.5.1.3 | Columnx25CircuitStatus | read-write | mandatory | This object reports the current status of the circuit. An existing instance of this object can only be set to startClear, startPvcResetting, or invalid. An ins… |
| 1.3.6.1.2.1.10.5.5.1.4 | Columnx25CircuitEstablishTime | read-only | mandatory | The value of sysUpTime when the channel was associated with this circuit. For outgoing SVCs, this is the time the first call packet was sent. For incoming SVCs… |
| 1.3.6.1.2.1.10.5.5.1.5 | Columnx25CircuitDirection | read-write | mandatory | The direction of the call that established this circuit. |
| 1.3.6.1.2.1.10.5.5.1.6 | Columnx25CircuitInOctets | read-only | mandatory | The number of octets of user data delivered to upper layer. |
| 1.3.6.1.2.1.10.5.5.1.7 | Columnx25CircuitInPdus | read-only | mandatory | The number of PDUs received for this circuit. |
| 1.3.6.1.2.1.10.5.5.1.8 | Columnx25CircuitInRemotelyInitiatedResets | read-only | mandatory | The number of Resets received for this circuit with cause code of DTE initiated. |
| 1.3.6.1.2.1.10.5.5.1.9 | Columnx25CircuitInProviderInitiatedResets | read-only | mandatory | The number of Resets received for this circuit with cause code other than DTE initiated. |
| 1.3.6.1.2.1.10.5.5.1.10 | Columnx25CircuitInInterrupts | read-only | mandatory | The number of interrupt packets received for this circuit. |
| 1.3.6.1.2.1.10.5.5.1.11 | Columnx25CircuitOutOctets | read-only | mandatory | The number of octets of user data sent for this circuit. |
| 1.3.6.1.2.1.10.5.5.1.12 | Columnx25CircuitOutPdus | read-only | mandatory | The number of PDUs sent for this circuit. |
| 1.3.6.1.2.1.10.5.5.1.13 | Columnx25CircuitOutInterrupts | read-only | mandatory | The number of interrupt packets sent on this circuit. |
| 1.3.6.1.2.1.10.5.5.1.14 | Columnx25CircuitDataRetransmissionTimeouts | read-only | mandatory | The number of times the T25 data retransmission timer expired for this circuit. |
| 1.3.6.1.2.1.10.5.5.1.15 | Columnx25CircuitResetTimeouts | read-only | mandatory | The number of times the T22 reset timer expired for this circuit. |
| 1.3.6.1.2.1.10.5.5.1.16 | Columnx25CircuitInterruptTimeouts | read-only | mandatory | The number of times the T26 Interrupt timer expired for this circuit. |
| 1.3.6.1.2.1.10.5.5.1.17 | Columnx25CircuitCallParamId | read-write | mandatory | This identifies the instance of the x25CallParmIndex for the entry in the x25CallParmTable which contains the call parameters in use with this circuit. The ent… |
| 1.3.6.1.2.1.10.5.5.1.18 | Columnx25CircuitCalledDteAddress | read-write | mandatory | For incoming calls, this is the called address from the call indication packet. For outgoing calls, this is the called address from the call confirmation packe… |
| 1.3.6.1.2.1.10.5.5.1.19 | Columnx25CircuitCallingDteAddress | read-write | mandatory | For incoming calls, this is the calling address from the call indication packet. For outgoing calls, this is the calling address from the call confirmation pac… |
| 1.3.6.1.2.1.10.5.5.1.20 | Columnx25CircuitOriginallyCalledAddress | read-write | mandatory | For incoming calls, this is the address in the call Redirection or Call Deflection Notification facility if the call was deflected or redirected, otherwise it … |
| 1.3.6.1.2.1.10.5.5.1.21 | Columnx25CircuitDescr | read-write | mandatory | A descriptive string associated with this circuit. This provides a place for the agent to supply any descriptive information it knows about the use or owner of… |
| 1.3.6.1.2.1.10.5.6 | Scalarx25ClearedCircuitEntriesRequested | read-write | mandatory | The requested number of entries for the agent to keep in the x25ClearedCircuit table. |
| 1.3.6.1.2.1.10.5.7 | Scalarx25ClearedCircuitEntriesGranted | read-only | mandatory | The actual number of entries the agent will keep in the x25ClearedCircuit Table. |
| 1.3.6.1.2.1.10.5.8 | Tablex25ClearedCircuitTable | not-accessible | mandatory | A table of entries about closed circuits. Entries must be made in this table whenever circuits are closed and the close request or close indication packet cont… |
| 1.3.6.1.2.1.10.5.8.1 | Rowx25ClearedCircuitEntry | not-accessible | mandatory | Information about a cleared circuit. |
| 1.3.6.1.2.1.10.5.8.1.1 | Columnx25ClearedCircuitIndex | read-only | mandatory | An index that uniquely distinguishes one entry in the clearedCircuitTable from another. This index will start at 2147483647 and will decrease by one for each n… |
| 1.3.6.1.2.1.10.5.8.1.2 | Columnx25ClearedCircuitPleIndex | read-only | mandatory | The value of ifIndex for the PLE which cleared the circuit that created the entry. |
| 1.3.6.1.2.1.10.5.8.1.3 | Columnx25ClearedCircuitTimeEstablished | read-only | mandatory | The value of sysUpTime when the circuit was established. This will be the same value that was in the x25CircuitEstablishTime for the circuit. |
| 1.3.6.1.2.1.10.5.8.1.4 | Columnx25ClearedCircuitTimeCleared | read-only | mandatory | The value of sysUpTime when the circuit was cleared. For locally initiated clears, this will be the time when the clear confirmation was received. For remotely… |
| 1.3.6.1.2.1.10.5.8.1.5 | Columnx25ClearedCircuitChannel | read-only | mandatory | The channel number for the circuit that was cleared. |
| 1.3.6.1.2.1.10.5.8.1.6 | Columnx25ClearedCircuitClearingCause | read-only | mandatory | The Clearing Cause from the clear request or clear indication packet that cleared the circuit. |
| 1.3.6.1.2.1.10.5.8.1.7 | Columnx25ClearedCircuitDiagnosticCode | read-only | mandatory | The Diagnostic Code from the clear request or clear indication packet that cleared the circuit. |
| 1.3.6.1.2.1.10.5.8.1.8 | Columnx25ClearedCircuitInPdus | read-only | mandatory | The number of PDUs received on the circuit. |
| 1.3.6.1.2.1.10.5.8.1.9 | Columnx25ClearedCircuitOutPdus | read-only | mandatory | The number of PDUs transmitted on the circuit. |
| 1.3.6.1.2.1.10.5.8.1.10 | Columnx25ClearedCircuitCalledAddress | read-only | mandatory | The called address from the cleared circuit. |
| 1.3.6.1.2.1.10.5.8.1.11 | Columnx25ClearedCircuitCallingAddress | read-only | mandatory | The calling address from the cleared circuit. |
| 1.3.6.1.2.1.10.5.8.1.12 | Columnx25ClearedCircuitClearFacilities | read-only | mandatory | The facilities field from the clear request or clear indication packet that cleared the circuit. A size of zero indicates no facilities were present. |
| 1.3.6.1.2.1.10.5.9 | Tablex25CallParmTable | not-accessible | mandatory | These objects contain the parameters that can be varied between X.25 calls. The entries in this table are independent of the PLE. There exists only one of thes… |
| 1.3.6.1.2.1.10.5.9.1 | Rowx25CallParmEntry | not-accessible | mandatory | Entries of x25CallParmTable. |
| 1.3.6.1.2.1.10.5.9.1.1 | Columnx25CallParmIndex | read-only | mandatory | A value that distinguishes this entry from another entry. Entries in this table are referenced from other objects which identify call parameters. It is impossi… |
| 1.3.6.1.2.1.10.5.9.1.2 | Columnx25CallParmStatus | read-write | mandatory | The status of this call parameter entry. See RFC 1271 for details of usage. |
| 1.3.6.1.2.1.10.5.9.1.3 | Columnx25CallParmRefCount | read-only | mandatory | The number of references know by a management station to exist to this set of call parameters. This is the number of other objects that have returned a value o… |
| 1.3.6.1.2.1.10.5.9.1.4 | Columnx25CallParmInPacketSize | read-write | mandatory | The maximum receive packet size in octets for a circuit. A size of zero for a circuit means use the PLE default size. A size of zero for the PLE means use a de… |
| 1.3.6.1.2.1.10.5.9.1.5 | Columnx25CallParmOutPacketSize | read-write | mandatory | The maximum transmit packet size in octets for a circuit. A size of zero for a circuit means use the PLE default size. A size of zero for the PLE default means… |
| 1.3.6.1.2.1.10.5.9.1.6 | Columnx25CallParmInWindowSize | read-write | mandatory | The receive window size for a circuit. A size of zero for a circuit means use the PLE default size. A size of zero for the PLE default means use 2. |
| 1.3.6.1.2.1.10.5.9.1.7 | Columnx25CallParmOutWindowSize | read-write | mandatory | The transmit window size for a circuit. A size of zero for a circuit means use the PLE default size. A size of zero for the PLE default means use 2. |
| 1.3.6.1.2.1.10.5.9.1.8 | Columnx25CallParmAcceptReverseCharging | read-write | mandatory | An enumeration defining if the PLE will accept or refuse charges. A value of default for a circuit means use the PLE default value. A value of neverAccept is o… |
| 1.3.6.1.2.1.10.5.9.1.9 | Columnx25CallParmProposeReverseCharging | read-write | mandatory | An enumeration defining if the PLE should propose reverse or local charging. The value of default for a circuit means use the PLE default. The value of default… |
| 1.3.6.1.2.1.10.5.9.1.10 | Columnx25CallParmFastSelect | read-write | mandatory | Expresses preference for use of fast select facility. The value of default for a circuit is the PLE default. A value of default for the PLE means noFastSelect.… |
| 1.3.6.1.2.1.10.5.9.1.11 | Columnx25CallParmInThruPutClasSize | read-write | mandatory | The incoming throughput class to negotiate. A value of tcDefault for a circuit means use the PLE default. A value of tcDefault for the PLE default means tcNone… |
| 1.3.6.1.2.1.10.5.9.1.12 | Columnx25CallParmOutThruPutClasSize | read-write | mandatory | The outgoing throughput class to negotiate. A value of tcDefault for a circuit means use the PLE default. A value of tcDefault for the PLE default means use tc… |
| 1.3.6.1.2.1.10.5.9.1.13 | Columnx25CallParmCug | read-write | mandatory | The Closed User Group to specify. This consists of two or four octets containing the characters 0 through 9. A zero length string indicates no facility request… |
| 1.3.6.1.2.1.10.5.9.1.14 | Columnx25CallParmCugoa | read-write | mandatory | The Closed User Group with Outgoing Access to specify. This consists of two or four octets containing the characters 0 through 9. A string length of three cont… |
| 1.3.6.1.2.1.10.5.9.1.15 | Columnx25CallParmBcug | read-write | mandatory | The Bilateral Closed User Group to specify. This consists of two octets containing the characters 0 through 9. A string length of three containing the characte… |
| 1.3.6.1.2.1.10.5.9.1.16 | Columnx25CallParmNui | read-write | mandatory | The Network User Identifier facility. This is binary value to be included immediately after the length field. The PLE will supply the length octet. A zero leng… |
| 1.3.6.1.2.1.10.5.9.1.17 | Columnx25CallParmChargingInfo | read-write | mandatory | The charging Information facility. A value of default for a circuit means use the PLE default. The value of default for the default PLE parameters means use no… |
| 1.3.6.1.2.1.10.5.9.1.18 | Columnx25CallParmRpoa | read-write | mandatory | The RPOA facility. The octet string contains n * 4 sequences of the characters 0-9 to specify a facility with n entries. The octet string containing the 3 char… |
| 1.3.6.1.2.1.10.5.9.1.19 | Columnx25CallParmTrnstDly | read-write | mandatory | The Transit Delay Selection and Indication value. A value of 65536 indicates no facility requested. A value of 65537 for a circuit means use the PLE default (t… |
| 1.3.6.1.2.1.10.5.9.1.20 | Columnx25CallParmCallingExt | read-write | mandatory | The Calling Extension facility. This contains one of the following: A sequence of hex digits with the value to be put in the facility. These digits will be con… |
| 1.3.6.1.2.1.10.5.9.1.21 | Columnx25CallParmCalledExt | read-write | mandatory | The Called Extension facility. This contains one of the following: A sequence of hex digits with the value to be put in the facility. These digits will be conv… |
| 1.3.6.1.2.1.10.5.9.1.22 | Columnx25CallParmInMinThuPutCls | read-write | mandatory | The minimum input throughput Class. A value of 16 for a circuit means use the PLE default (the PLE parameters entry may not use this value). A value of 17 indi… |
| 1.3.6.1.2.1.10.5.9.1.23 | Columnx25CallParmOutMinThuPutCls | read-write | mandatory | The minimum output throughput Class. A value of 16 for a circuit means use the PLE default (the PLE parameters entry may not use this value). A value of 17 ind… |
| 1.3.6.1.2.1.10.5.9.1.24 | Columnx25CallParmEndTrnsDly | read-write | mandatory | The End-to-End Transit Delay to negotiate. An octet string of length 2, 4, or 6 contains the facility encoded as specified in ISO/IEC 8208 section 15.3.2.4. An… |
| 1.3.6.1.2.1.10.5.9.1.25 | Columnx25CallParmPriority | read-write | mandatory | The priority facility to negotiate. The octet string encoded as specified in ISO/IEC 8208 section 15.3.2.5. A zero length string indicates no facility requeste… |
| 1.3.6.1.2.1.10.5.9.1.26 | Columnx25CallParmProtection | read-write | mandatory | A string contains the following: A hex string containing the value for the protection facility. This will be converted from hex to the octets actually in the p… |
| 1.3.6.1.2.1.10.5.9.1.27 | Columnx25CallParmExptData | read-write | mandatory | The Expedited Data facility to negotiate. A value of default for a circuit means use the PLE default value. The entry for the PLE default parameters may not ha… |
| 1.3.6.1.2.1.10.5.9.1.28 | Columnx25CallParmUserData | read-write | mandatory | The call user data as placed in the packet. A zero length string indicates no call user data. If both the circuit call parameters and the PLE default have call… |
| 1.3.6.1.2.1.10.5.9.1.29 | Columnx25CallParmCallingNetworkFacilities | read-write | mandatory | The calling network facilities. The facilities are encoded here exactly as encoded in the call packet. These facilities do not include the marker facility code… |
| 1.3.6.1.2.1.10.5.9.1.30 | Columnx25CallParmCalledNetworkFacilities | read-write | mandatory | The called network facilities. The facilities are encoded here exactly as encoded in the call packet. These facilities do not include the marker facility code.… |
| 1.3.6.1.2.1.10.5.10 | Nodex25ProtocolVersion | |||
| 1.3.6.1.2.1.10.5.10.1 | Nodex25protocolCcittV1976 | |||
| 1.3.6.1.2.1.10.5.10.2 | Nodex25protocolCcittV1980 | |||
| 1.3.6.1.2.1.10.5.10.3 | Nodex25protocolCcittV1984 | |||
| 1.3.6.1.2.1.10.5.10.4 | Nodex25protocolCcittV1988 | |||
| 1.3.6.1.2.1.10.5.10.5 | Nodex25protocolIso8208V1987 | |||
| 1.3.6.1.2.1.10.5.10.6 | Nodex25protocolIso8208V1989 | |||
| 1.3.6.1.2.1.10.16 | Nodelapb | |||
| 1.3.6.1.2.1.10.16.5 | NodelapbProtocolVersion | |||
| 1.3.6.1.2.1.10.16.5.1 | NodelapbProtocolIso7776v1986 | |||
| 1.3.6.1.2.1.10.16.5.2 | NodelapbProtocolCcittV1980 | |||
| 1.3.6.1.2.1.10.16.5.3 | NodelapbProtocolCcittV1984 | |||
| 1.3.6.1.2.1.10.32 | Nodeframe-relay | |||
| 1.3.6.1.2.1.10.32.1 | NodefrDLCIStatusChange | This trap indicates that the indicated Virtual Circuit has changed state. It has either been created or invalidated, or has toggled between the active and inac… | ||
| 1.3.6.1.2.1.10.32.1 | TablefrDlcmiTable | not-accessible | mandatory | The Parameters for the Data Link Connection Management Interface for the frame relay service on this interface. |
| 1.3.6.1.2.1.10.32.1.1 | RowfrDlcmiEntry | not-accessible | mandatory | The Parameters for a particular Data Link Con- nection Management Interface. |
| 1.3.6.1.2.1.10.32.1.1.1 | ColumnfrDlcmiIfIndex | read-only | mandatory | The ifIndex value of the corresponding ifEn- try. |
| 1.3.6.1.2.1.10.32.1.1.2 | ColumnfrDlcmiState | read-write | mandatory | This variable states which Data Link Connec- tion Management scheme is active (and by impli- cation, what DLCI it uses) on the Frame Relay interface. |
| 1.3.6.1.2.1.10.32.1.1.3 | ColumnfrDlcmiAddress | read-write | mandatory | This variable states which address format is in use on the Frame Relay interface. |
| 1.3.6.1.2.1.10.32.1.1.4 | ColumnfrDlcmiAddressLen | read-write | mandatory | This variable states which address length in octets. In the case of Q922 format, the length indicates the entire length of the address in- cluding the control … |
| 1.3.6.1.2.1.10.32.1.1.5 | ColumnfrDlcmiPollingInterval | read-write | mandatory | This is the number of seconds between succes- sive status enquiry messages. |
| 1.3.6.1.2.1.10.32.1.1.6 | ColumnfrDlcmiFullEnquiryInterval | read-write | mandatory | Number of status enquiry intervals that pass before issuance of a full status enquiry mes- sage. |
| 1.3.6.1.2.1.10.32.1.1.7 | ColumnfrDlcmiErrorThreshold | read-write | mandatory | This is the maximum number of unanswered Status Enquiries the equipment shall accept be- fore declaring the interface down. |
| 1.3.6.1.2.1.10.32.1.1.8 | ColumnfrDlcmiMonitoredEvents | read-write | mandatory | This is the number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvents' number of events the station… |
| 1.3.6.1.2.1.10.32.1.1.9 | ColumnfrDlcmiMaxSupportedVCs | read-write | mandatory | The maximum number of Virtual Circuits allowed for this interface. Usually dictated by the Frame Relay network. In response to a SET, if a value less than zero… |
| 1.3.6.1.2.1.10.32.1.1.10 | ColumnfrDlcmiMulticast | read-write | mandatory | This indicates whether the Frame Relay inter- face is using a multicast service. |
| 1.3.6.1.2.1.10.32.2 | TablefrCircuitTable | not-accessible | mandatory | A table containing information about specific Data Link Connection Identifiers and corresponding virtual circuits. |
| 1.3.6.1.2.1.10.32.2.1 | RowfrCircuitEntry | not-accessible | mandatory | The information regarding a single Data Link Connection Identifier. |
| 1.3.6.1.2.1.10.32.2.1.1 | ColumnfrCircuitIfIndex | read-only | mandatory | The ifIndex Value of the ifEntry this virtual circuit is layered onto. |
| 1.3.6.1.2.1.10.32.2.1.2 | ColumnfrCircuitDlci | read-only | mandatory | The Data Link Connection Identifier for this virtual circuit. |
| 1.3.6.1.2.1.10.32.2.1.3 | ColumnfrCircuitState | read-write | mandatory | Indicates whether the particular virtual cir- cuit is operational. In the absence of a Data Link Connection Management Interface, virtual circuit entries (rows… |
| 1.3.6.1.2.1.10.32.2.1.4 | ColumnfrCircuitReceivedFECNs | read-only | mandatory | Number of frames received from the network in- dicating forward congestion since the virtual circuit was created. |
| 1.3.6.1.2.1.10.32.2.1.5 | ColumnfrCircuitReceivedBECNs | read-only | mandatory | Number of frames received from the network in- dicating backward congestion since the virtual circuit was created. |
| 1.3.6.1.2.1.10.32.2.1.6 | ColumnfrCircuitSentFrames | read-only | mandatory | The number of frames sent from this virtual circuit since it was created. |
| 1.3.6.1.2.1.10.32.2.1.7 | ColumnfrCircuitSentOctets | read-only | mandatory | The number of octets sent from this virtual circuit since it was created. |
| 1.3.6.1.2.1.10.32.2.1.8 | ColumnfrCircuitReceivedFrames | read-only | mandatory | Number of frames received over this virtual circuit since it was created. |
| 1.3.6.1.2.1.10.32.2.1.9 | ColumnfrCircuitReceivedOctets | read-only | mandatory | Number of octets received over this virtual circuit since it was created. |
| 1.3.6.1.2.1.10.32.2.1.10 | ColumnfrCircuitCreationTime | read-only | mandatory | The value of sysUpTime when the virtual cir- cuit was created, whether by the Data Link Con- nection Management Interface or by a SetRe- quest. |
| 1.3.6.1.2.1.10.32.2.1.11 | ColumnfrCircuitLastTimeChange | read-only | mandatory | The value of sysUpTime when last there was a change in the virtual circuit state |
| 1.3.6.1.2.1.10.32.2.1.12 | ColumnfrCircuitCommittedBurst | read-write | mandatory | This variable indicates the maximum amount of data, in bits, that the network agrees to transfer under normal conditions, during the measurement interval. |
| 1.3.6.1.2.1.10.32.2.1.13 | ColumnfrCircuitExcessBurst | read-write | mandatory | This variable indicates the maximum amount of uncommitted data bits that the network will at- tempt to deliver over the measurement interval. By default, if no… |
| 1.3.6.1.2.1.10.32.2.1.14 | ColumnfrCircuitThroughput | read-write | mandatory | Throughput is the average number of 'Frame Re- lay Information Field' bits transferred per second across a user network interface in one direction, measured ov… |
| 1.3.6.1.2.1.10.32.3 | TablefrErrTable | not-accessible | mandatory | A table containing information about Errors on the Frame Relay interface. |
| 1.3.6.1.2.1.10.32.3.1 | RowfrErrEntry | not-accessible | mandatory | The error information for a single frame relay interface. |
| 1.3.6.1.2.1.10.32.3.1.1 | ColumnfrErrIfIndex | read-only | mandatory | The ifIndex Value of the corresponding ifEn- try. |
| 1.3.6.1.2.1.10.32.3.1.2 | ColumnfrErrType | read-only | mandatory | The type of error that was last seen on this interface. |
| 1.3.6.1.2.1.10.32.3.1.3 | ColumnfrErrData | read-only | mandatory | An octet string containing as much of the er- ror packet as possible. As a minimum, it must contain the Q.922 Address or as much as was delivered. It is desira… |
| 1.3.6.1.2.1.10.32.3.1.4 | ColumnfrErrTime | read-only | mandatory | The value of sysUpTime at which the error was detected. |
| 1.3.6.1.2.1.10.32.4 | Nodeframe-relay-globals | |||
| 1.3.6.1.2.1.10.32.4.1 | ScalarfrTrapState | read-write | mandatory | This variable indicates whether the system produces the frDLCIStatusChange trap. |
| 1.3.6.1.2.1.11 | Nodesnmp | |||
| 1.3.6.1.2.1.11.1 | ScalarsnmpInPkts | read-only | mandatory | The total number of Messages delivered to the SNMP entity from the transport service. |
| 1.3.6.1.2.1.11.2 | ScalarsnmpOutPkts | read-only | mandatory | The total number of SNMP Messages which were passed from the SNMP protocol entity to the transport service. |
| 1.3.6.1.2.1.11.3 | ScalarsnmpInBadVersions | read-only | mandatory | The total number of SNMP Messages which were delivered to the SNMP protocol entity and were for an unsupported SNMP version. |
| 1.3.6.1.2.1.11.4 | ScalarsnmpInBadCommunityNames | read-only | mandatory | The total number of SNMP Messages delivered to the SNMP protocol entity which used a SNMP community name not known to said entity. |
| 1.3.6.1.2.1.11.5 | ScalarsnmpInBadCommunityUses | read-only | mandatory | The total number of SNMP Messages delivered to the SNMP protocol entity which represented an SNMP operation which was not allowed by the SNMP community named i… |
| 1.3.6.1.2.1.11.6 | ScalarsnmpInASNParseErrs | read-only | mandatory | The total number of ASN.1 or BER errors encountered by the SNMP protocol entity when decoding received SNMP Messages. |
| 1.3.6.1.2.1.11.8 | ScalarsnmpInTooBigs | read-only | mandatory | The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `tooBig'. |
| 1.3.6.1.2.1.11.9 | ScalarsnmpInNoSuchNames | read-only | mandatory | The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `noSuchName'. |
| 1.3.6.1.2.1.11.10 | ScalarsnmpInBadValues | read-only | mandatory | The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `badValue'. |
| 1.3.6.1.2.1.11.11 | ScalarsnmpInReadOnlys | read-only | mandatory | The total number valid SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `readOnly'. It should be… |
| 1.3.6.1.2.1.11.12 | ScalarsnmpInGenErrs | read-only | mandatory | The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `genErr'. |
| 1.3.6.1.2.1.11.13 | ScalarsnmpInTotalReqVars | read-only | mandatory | The total number of MIB objects which have been retrieved successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and Get-Ne… |
| 1.3.6.1.2.1.11.14 | ScalarsnmpInTotalSetVars | read-only | mandatory | The total number of MIB objects which have been altered successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request PDUs. |
| 1.3.6.1.2.1.11.15 | ScalarsnmpInGetRequests | read-only | mandatory | The total number of SNMP Get-Request PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.16 | ScalarsnmpInGetNexts | read-only | mandatory | The total number of SNMP Get-Next PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.17 | ScalarsnmpInSetRequests | read-only | mandatory | The total number of SNMP Set-Request PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.18 | ScalarsnmpInGetResponses | read-only | mandatory | The total number of SNMP Get-Response PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.19 | ScalarsnmpInTraps | read-only | mandatory | The total number of SNMP Trap PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.20 | ScalarsnmpOutTooBigs | read-only | mandatory | The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `tooBig.' |
| 1.3.6.1.2.1.11.21 | ScalarsnmpOutNoSuchNames | read-only | mandatory | The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status is `noSuchName'. |
| 1.3.6.1.2.1.11.22 | ScalarsnmpOutBadValues | read-only | mandatory | The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `badValue'. |
| 1.3.6.1.2.1.11.24 | ScalarsnmpOutGenErrs | read-only | mandatory | The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `genErr'. |
| 1.3.6.1.2.1.11.25 | ScalarsnmpOutGetRequests | read-only | mandatory | The total number of SNMP Get-Request PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.26 | ScalarsnmpOutGetNexts | read-only | mandatory | The total number of SNMP Get-Next PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.27 | ScalarsnmpOutSetRequests | read-only | mandatory | The total number of SNMP Set-Request PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.28 | ScalarsnmpOutGetResponses | read-only | mandatory | The total number of SNMP Get-Response PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.29 | ScalarsnmpOutTraps | read-only | mandatory | The total number of SNMP Trap PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.30 | ScalarsnmpEnableAuthenTraps | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate authentication-failure traps. The value of this object overrides any configuration informatio… |
| 1.3.6.1.2.1.13 | Nodeappletalk | |||
| 1.3.6.1.2.1.13.1 | Nodellap | |||
| 1.3.6.1.2.1.13.2 | Nodeaarp | |||
| 1.3.6.1.2.1.13.3 | Nodeatport | |||
| 1.3.6.1.2.1.13.4 | Nodeddp | |||
| 1.3.6.1.2.1.13.5 | Nodertmp | |||
| 1.3.6.1.2.1.13.6 | Nodekip | |||
| 1.3.6.1.2.1.13.7 | Nodezip | |||
| 1.3.6.1.2.1.13.8 | Nodenbp | |||
| 1.3.6.1.2.1.13.9 | Nodeatecho | |||
| 1.3.6.1.2.1.14 | Nodeospf | |||
| 1.3.6.1.2.1.14.1 | NodeospfGeneralGroup | |||
| 1.3.6.1.2.1.16 | Nodermon | |||
| 1.3.6.1.2.1.16.1 | NoderisingAlarm | The SNMP trap that is generated when an alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps. | ||
| 1.3.6.1.2.1.16.1 | Nodestatistics | |||
| 1.3.6.1.2.1.16.1.1 | TableetherStatsTable | not-accessible | mandatory | A list of Ethernet statistics entries. |
| 1.3.6.1.2.1.16.1.1.1 | RowetherStatsEntry | not-accessible | mandatory | A collection of statistics kept for a particular Ethernet interface. |
| 1.3.6.1.2.1.16.1.1.1.1 | ColumnetherStatsIndex | read-only | mandatory | The value of this object uniquely identifies this etherStats entry. |
| 1.3.6.1.2.1.16.1.1.1.2 | ColumnetherStatsDataSource | read-write | mandatory | This object identifies the source of the data that this etherStats entry is configured to analyze. This source can be any ethernet interface on this device. In… |
| 1.3.6.1.2.1.16.1.1.1.3 | ColumnetherStatsDropEvents | read-only | mandatory | The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets … |
| 1.3.6.1.2.1.16.1.1.1.4 | ColumnetherStatsOctets | read-only | mandatory | The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets). |
| 1.3.6.1.2.1.16.1.1.1.5 | ColumnetherStatsPkts | read-only | mandatory | The total number of packets (including error packets) received. |
| 1.3.6.1.2.1.16.1.1.1.6 | ColumnetherStatsBroadcastPkts | read-only | mandatory | The total number of good packets received that were directed to the broadcast address. |
| 1.3.6.1.2.1.16.1.1.1.7 | ColumnetherStatsMulticastPkts | read-only | mandatory | The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast a… |
| 1.3.6.1.2.1.16.1.1.1.8 | ColumnetherStatsCRCAlignErrors | read-only | mandatory | The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but were no… |
| 1.3.6.1.2.1.16.1.1.1.9 | ColumnetherStatsUndersizePkts | read-only | mandatory | The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. |
| 1.3.6.1.2.1.16.1.1.1.10 | ColumnetherStatsOversizePkts | read-only | mandatory | The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed. |
| 1.3.6.1.2.1.16.1.1.1.11 | ColumnetherStatsFragments | read-only | mandatory | The total number of packets received that were not an integral number of octets in length or that had a bad Frame Check Sequence (FCS), and were less than 64 o… |
| 1.3.6.1.2.1.16.1.1.1.12 | ColumnetherStatsJabbers | read-only | mandatory | The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and were not an integral number of o… |
| 1.3.6.1.2.1.16.1.1.1.13 | ColumnetherStatsCollisions | read-only | mandatory | The best estimate of the total number of collisions on this Ethernet segment. |
| 1.3.6.1.2.1.16.1.1.1.14 | ColumnetherStatsPkts64Octets | read-only | mandatory | The total number of packets (including error packets) received that were 64 octets in length (excluding framing bits but including FCS octets). |
| 1.3.6.1.2.1.16.1.1.1.15 | ColumnetherStatsPkts65to127Octets | read-only | mandatory | The total number of packets (including error packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FC… |
| 1.3.6.1.2.1.16.1.1.1.16 | ColumnetherStatsPkts128to255Octets | read-only | mandatory | The total number of packets (including error packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including F… |
| 1.3.6.1.2.1.16.1.1.1.17 | ColumnetherStatsPkts256to511Octets | read-only | mandatory | The total number of packets (including error packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including F… |
| 1.3.6.1.2.1.16.1.1.1.18 | ColumnetherStatsPkts512to1023Octets | read-only | mandatory | The total number of packets (including error packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including … |
| 1.3.6.1.2.1.16.1.1.1.19 | ColumnetherStatsPkts1024to1518Octets | read-only | mandatory | The total number of packets (including error packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including… |
| 1.3.6.1.2.1.16.1.1.1.20 | ColumnetherStatsOwner | read-write | mandatory | The entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.2.1.16.1.1.1.21 | ColumnetherStatsStatus | read-write | mandatory | The status of this etherStats entry. |
| 1.3.6.1.2.1.16.2 | NodefallingAlarm | The SNMP trap that is generated when an alarm entry crosses its falling threshold and generates an event that is configured for sending SNMP traps. | ||
| 1.3.6.1.2.1.16.2 | Nodehistory | |||
| 1.3.6.1.2.1.16.3 | Nodealarm | |||
| 1.3.6.1.2.1.16.3.1 | TablealarmTable | not-accessible | mandatory | A list of alarm entries. |
| 1.3.6.1.2.1.16.3.1.1 | RowalarmEntry | not-accessible | mandatory | A list of parameters that set up a periodic checking for alarm conditions. |
| 1.3.6.1.2.1.16.3.1.1.1 | ColumnalarmIndex | read-only | mandatory | An index that uniquely identifies an entry in the alarm table. Each such entry defines a diagnostic sample at a particular interval for an object on the device. |
| 1.3.6.1.2.1.16.3.1.1.2 | ColumnalarmInterval | read-write | mandatory | The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. When setting this variable, care should be given to… |
| 1.3.6.1.2.1.16.3.1.1.3 | ColumnalarmVariable | read-write | mandatory | The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Counter, Gauge, or … |
| 1.3.6.1.2.1.16.3.1.1.4 | ColumnalarmSampleType | read-write | mandatory | The method of sampling the selected variable and calculating the value to be compared against the thresholds. If the value of this object is absoluteValue(1), … |
| 1.3.6.1.2.1.16.3.1.1.5 | ColumnalarmValue | read-only | mandatory | The value of the statistic during the last sampling period. The value during the current sampling period is not made available until the period is completed. |
| 1.3.6.1.2.1.16.3.1.1.6 | ColumnalarmStartupAlarm | read-write | mandatory | The alarm that may be sent when this entry is first set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThre… |
| 1.3.6.1.2.1.16.3.1.1.7 | ColumnalarmRisingThreshold | read-write | mandatory | A threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval w… |
| 1.3.6.1.2.1.16.3.1.1.8 | ColumnalarmFallingThreshold | read-write | mandatory | A threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was … |
| 1.3.6.1.2.1.16.3.1.1.9 | ColumnalarmRisingEventIndex | read-write | mandatory | The index of the eventEntry that is used when a rising threshold is crossed. The eventEntry identified by a particular value of this index is the same as ident… |
| 1.3.6.1.2.1.16.3.1.1.10 | ColumnalarmFallingEventIndex | read-write | mandatory | The index of the eventEntry that is used when a falling threshold is crossed. The eventEntry identified by a particular value of this index is the same as iden… |
| 1.3.6.1.2.1.16.3.1.1.11 | ColumnalarmOwner | read-write | mandatory | The entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.2.1.16.3.1.1.12 | ColumnalarmStatus | read-write | mandatory | The status of this alarm entry. |
| 1.3.6.1.2.1.16.4 | Nodehosts | |||
| 1.3.6.1.2.1.16.5 | NodehostTopN | |||
| 1.3.6.1.2.1.16.6 | Nodematrix | |||
| 1.3.6.1.2.1.16.7 | Nodefilter | |||
| 1.3.6.1.2.1.16.8 | Nodecapture | |||
| 1.3.6.1.2.1.16.9 | Nodeevent | |||
| 1.3.6.1.2.1.16.9.1 | TableeventTable | not-accessible | mandatory | A list of events to be generated. |
| 1.3.6.1.2.1.16.9.1.1 | RoweventEntry | not-accessible | mandatory | A set of parameters that describe an event to be generated when certain conditions are met. |
| 1.3.6.1.2.1.16.9.1.1.1 | ColumneventIndex | read-only | mandatory | An index that uniquely identifies an entry in the event table. Each such entry defines one event that is to be generated when the appropriate conditions occur. |
| 1.3.6.1.2.1.16.9.1.1.2 | ColumneventDescription | read-write | mandatory | A comment describing this event entry. |
| 1.3.6.1.2.1.16.9.1.1.3 | ColumneventType | read-write | mandatory | The type of notification that the probe will make about this event. In the case of log, an entry is made in the log table for each event. In the case of snmp-t… |
| 1.3.6.1.2.1.16.9.1.1.4 | ColumneventCommunity | read-write | mandatory | If an SNMP trap is to be sent, it will be sent to the SNMP community specified by this octet string. In the future this table will be extended to include the p… |
| 1.3.6.1.2.1.16.9.1.1.5 | ColumneventLastTimeSent | read-only | mandatory | The value of sysUpTime at the time this event entry last generated an event. If this entry has not generated any events, this value will be zero. |
| 1.3.6.1.2.1.16.9.1.1.6 | ColumneventOwner | read-write | mandatory | The entity that configured this entry and is therefore using the resources assigned to it. If this object contains a string starting with 'monitor' and has ass… |
| 1.3.6.1.2.1.16.9.1.1.7 | ColumneventStatus | read-write | mandatory | The status of this event entry. If this object is not equal to valid(1), all associated log entries shall be deleted by the agent. |
| 1.3.6.1.2.1.16.9.2 | TablelogTable | not-accessible | mandatory | A list of events that have been logged. |
| 1.3.6.1.2.1.16.9.2.1 | RowlogEntry | not-accessible | mandatory | A set of data describing an event that has been logged. |
| 1.3.6.1.2.1.16.9.2.1.1 | ColumnlogEventIndex | read-only | mandatory | The event entry that generated this log entry. The log identified by a particular value of this index is associated with the same eventEntry as identified by t… |
| 1.3.6.1.2.1.16.9.2.1.2 | ColumnlogIndex | read-only | mandatory | An index that uniquely identifies an entry in the log table amongst those generated by the same eventEntries. These indexes are assigned beginning with 1 and i… |
| 1.3.6.1.2.1.16.9.2.1.3 | ColumnlogTime | read-only | mandatory | The value of sysUpTime when this log entry was created. |
| 1.3.6.1.2.1.16.9.2.1.4 | ColumnlogDescription | read-only | mandatory | An implementation dependent description of the event that activated this log entry. |
| 1.3.6.1.2.1.17 | Nodedot1dBridge | |||
| 1.3.6.1.2.1.17.1 | Nodedot1dBase | |||
| 1.3.6.1.2.1.17.1 | NodenewRoot | The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new… | ||
| 1.3.6.1.2.1.17.1.1 | Scalardot1dBaseBridgeAddress | read-only | mandatory | The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all… |
| 1.3.6.1.2.1.17.1.2 | Scalardot1dBaseNumPorts | read-only | mandatory | The number of ports controlled by this bridging entity. |
| 1.3.6.1.2.1.17.1.3 | Scalardot1dBaseType | read-only | mandatory | Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the… |
| 1.3.6.1.2.1.17.1.4 | Tabledot1dBasePortTable | not-accessible | mandatory | A table that contains generic information about every port that is associated with this bridge. Transparent, source-route, and srt ports are included. |
| 1.3.6.1.2.1.17.1.4.1 | Rowdot1dBasePortEntry | not-accessible | mandatory | A list of information for each port of the bridge. |
| 1.3.6.1.2.1.17.1.4.1.1 | Columndot1dBasePort | read-only | mandatory | The port number of the port for which this entry contains bridge management information. |
| 1.3.6.1.2.1.17.1.4.1.2 | Columndot1dBasePortIfIndex | read-only | mandatory | The value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to this port. |
| 1.3.6.1.2.1.17.1.4.1.3 | Columndot1dBasePortCircuit | read-only | mandatory | For a port which (potentially) has the same value of dot1dBasePortIfIndex as another port on the same bridge, this object contains the name of an object instan… |
| 1.3.6.1.2.1.17.1.4.1.4 | Columndot1dBasePortDelayExceededDiscards | read-only | mandatory | The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges. |
| 1.3.6.1.2.1.17.1.4.1.5 | Columndot1dBasePortMtuExceededDiscards | read-only | mandatory | The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges. |
| 1.3.6.1.2.1.17.2 | Nodedot1dStp | |||
| 1.3.6.1.2.1.17.2 | NodetopologyChange | A topologyChange trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding … | ||
| 1.3.6.1.2.1.17.2.1 | Scalardot1dStpProtocolSpecification | read-only | mandatory | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE … |
| 1.3.6.1.2.1.17.2.2 | Scalardot1dStpPriority | read-write | mandatory | The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID ar… |
| 1.3.6.1.2.1.17.2.3 | Scalardot1dStpTimeSinceTopologyChange | read-only | mandatory | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.2.1.17.2.4 | Scalardot1dStpTopChanges | read-only | mandatory | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.2.1.17.2.5 | Scalardot1dStpDesignatedRoot | read-only | mandatory | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Ide… |
| 1.3.6.1.2.1.17.2.6 | Scalardot1dStpRootCost | read-only | mandatory | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.2.1.17.2.7 | Scalardot1dStpRootPort | read-only | mandatory | The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.2.1.17.2.8 | Scalardot1dStpMaxAge | read-only | mandatory | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is … |
| 1.3.6.1.2.1.17.2.9 | Scalardot1dStpHelloTime | read-only | mandatory | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become … |
| 1.3.6.1.2.1.17.2.10 | Scalardot1dStpHoldTime | read-only | mandatory | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredth… |
| 1.3.6.1.2.1.17.2.11 | Scalardot1dStpForwardDelay | read-only | mandatory | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The… |
| 1.3.6.1.2.1.17.2.12 | Scalardot1dStpBridgeMaxAge | read-write | mandatory | The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related … |
| 1.3.6.1.2.1.17.2.13 | Scalardot1dStpBridgeHelloTime | read-write | mandatory | The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second.… |
| 1.3.6.1.2.1.17.2.14 | Scalardot1dStpBridgeForwardDelay | read-write | mandatory | The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is re… |
| 1.3.6.1.2.1.17.2.15 | Tabledot1dStpPortTable | not-accessible | mandatory | A table that contains port-specific information for the Spanning Tree Protocol. |
| 1.3.6.1.2.1.17.2.15.1 | Rowdot1dStpPortEntry | not-accessible | mandatory | A list of information maintained by every port about the Spanning Tree Protocol state for that port. |
| 1.3.6.1.2.1.17.2.15.1.1 | Columndot1dStpPort | read-only | mandatory | The port number of the port for which this entry contains Spanning Tree Protocol management information. |
| 1.3.6.1.2.1.17.2.15.1.2 | Columndot1dStpPortPriority | read-write | mandatory | The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is … |
| 1.3.6.1.2.1.17.2.15.1.3 | Columndot1dStpPortState | read-only | mandatory | The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the … |
| 1.3.6.1.2.1.17.2.15.1.4 | Columndot1dStpPortEnable | read-write | mandatory | The enabled/disabled status of the port. |
| 1.3.6.1.2.1.17.2.15.1.5 | Columndot1dStpPortPathCost | read-write | mandatory | The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value o… |
| 1.3.6.1.2.1.17.2.15.1.6 | Columndot1dStpPortDesignatedRoot | read-only | mandatory | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po… |
| 1.3.6.1.2.1.17.2.15.1.7 | Columndot1dStpPortDesignatedCost | read-only | mandatory | The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| 1.3.6.1.2.1.17.2.15.1.8 | Columndot1dStpPortDesignatedBridge | read-only | mandatory | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| 1.3.6.1.2.1.17.2.15.1.9 | Columndot1dStpPortDesignatedPort | read-only | mandatory | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.2.1.17.2.15.1.10 | Columndot1dStpPortForwardTransitions | read-only | mandatory | The number of times this port has transitioned from the Learning state to the Forwarding state. |
| 1.3.6.1.2.1.17.3 | Nodedot1dSr | |||
| 1.3.6.1.2.1.17.4 | Nodedot1dTp | |||
| 1.3.6.1.2.1.17.4.1 | Scalardot1dTpLearnedEntryDiscards | read-only | mandatory | The total number of Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them in the… |
| 1.3.6.1.2.1.17.4.2 | Scalardot1dTpAgingTime | read-write | mandatory | The timeout period in seconds for aging out dynamically learned forwarding information. 802.1D-1990 recommends a default of 300 seconds. |
| 1.3.6.1.2.1.17.4.3 | Tabledot1dTpFdbTable | not-accessible | mandatory | A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the trans… |
| 1.3.6.1.2.1.17.4.3.1 | Rowdot1dTpFdbEntry | not-accessible | mandatory | Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information. |
| 1.3.6.1.2.1.17.4.3.1.1 | Columndot1dTpFdbAddress | read-only | mandatory | A unicast MAC address for which the bridge has forwarding and/or filtering information. |
| 1.3.6.1.2.1.17.4.3.1.2 | Columndot1dTpFdbPort | read-only | mandatory | Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1dTpFdbAdd… |
| 1.3.6.1.2.1.17.4.3.1.3 | Columndot1dTpFdbStatus | read-only | mandatory | The status of this entry. The meanings of the values are: other(1) : none of the following. This would include the case where some other MIB object (not the co… |
| 1.3.6.1.2.1.17.4.4 | Tabledot1dTpPortTable | not-accessible | mandatory | A table that contains information about every port that is associated with this transparent bridge. |
| 1.3.6.1.2.1.17.4.4.1 | Rowdot1dTpPortEntry | not-accessible | mandatory | A list of information for each port of a transparent bridge. |
| 1.3.6.1.2.1.17.4.4.1.1 | Columndot1dTpPort | read-only | mandatory | The port number of the port for which this entry contains Transparent bridging management information. |
| 1.3.6.1.2.1.17.4.4.1.2 | Columndot1dTpPortMaxInfo | read-only | mandatory | The maximum size of the INFO (non-MAC) field that this port will receive or transmit. |
| 1.3.6.1.2.1.17.4.4.1.3 | Columndot1dTpPortInFrames | read-only | mandatory | The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only coun… |
| 1.3.6.1.2.1.17.4.4.1.4 | Columndot1dTpPortOutFrames | read-only | mandatory | The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only … |
| 1.3.6.1.2.1.17.4.4.1.5 | Columndot1dTpPortInDiscards | read-only | mandatory | Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process. |
| 1.3.6.1.2.1.17.5 | Nodedot1dStatic | |||
| 1.3.6.1.2.1.17.5.1 | Tabledot1dStaticTable | not-accessible | mandatory | A table containing filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from … |
| 1.3.6.1.2.1.17.5.1.1 | Rowdot1dStaticEntry | not-accessible | mandatory | Filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from a specific port and… |
| 1.3.6.1.2.1.17.5.1.1.1 | Columndot1dStaticAddress | read-write | mandatory | The destination MAC address in a frame to which this entry's filtering information applies. This object can take the value of a unicast address, a group addres… |
| 1.3.6.1.2.1.17.5.1.1.2 | Columndot1dStaticReceivePort | read-write | mandatory | Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of z… |
| 1.3.6.1.2.1.17.5.1.1.3 | Columndot1dStaticAllowedToGoTo | read-write | mandatory | The set of ports to which frames received from a specific port and destined for a specific MAC address, are allowed to be forwarded. Each octet within the valu… |
| 1.3.6.1.2.1.17.5.1.1.4 | Columndot1dStaticStatus | read-write | mandatory | This object indicates the status of this entry. The default value is permanent(3). other(1) - this entry is currently in use but the conditions under which it … |
| 1.3.6.1.2.1.18 | Nodephiv | |||
| 1.3.6.1.2.1.18.1 | NodephivSystem | |||
| 1.3.6.1.2.1.18.2 | NodephivManagement | |||
| 1.3.6.1.2.1.18.3 | Nodesession | |||
| 1.3.6.1.2.1.18.4 | Nodeend | |||
| 1.3.6.1.2.1.18.5 | Noderouting | |||
| 1.3.6.1.2.1.18.6 | Nodecircuit | |||
| 1.3.6.1.2.1.18.6.1 | TablephivCircuitParametersTable | not-accessible | mandatory | Information about the parameters associated with all circuits currently known. |
| 1.3.6.1.2.1.18.6.1.1 | RowphivCircuitParametersEntry | not-accessible | mandatory | Parameters information about all circuits currently known. |
| 1.3.6.1.2.1.18.6.1.1.1 | ColumnphivCircuitIndex | read-only | mandatory | A unique index value for each known circuit. |
| 1.3.6.1.2.1.18.6.1.1.2 | ColumnphivCircuitLineIndex | read-only | mandatory | The line on which this circuit is active. This is the same as the IfIndex. |
| 1.3.6.1.2.1.18.6.1.1.3 | ColumnphivCircuitCommonState | read-write | mandatory | This value represents the circuit's Network Management operational state. NOTE: These values are incremented by one compared to the standard DECnet values in o… |
| 1.3.6.1.2.1.18.6.1.1.4 | ColumnphivCircuitCommonSubState | read-only | mandatory | This value represents the circuit's Network Management operational and service substate. NOTE: These values are incremented by one compared to the standard DEC… |
| 1.3.6.1.2.1.18.6.1.1.5 | ColumnphivCircuitCommonName | read-only | mandatory | The name of the circuit entry in the table, for example, SVA-0 or in a level 2 router ASYNC-8 or ETHER-1). |
| 1.3.6.1.2.1.18.6.1.1.6 | ColumnphivCircuitExecRecallTimer | read-write | mandatory | This parameter represents the minimum number of seconds to wait before restarting the circuit. A value of 0 indicates not timer is running. |
| 1.3.6.1.2.1.18.6.1.1.7 | ColumnphivCircuitCommonType | read-only | mandatory | Represents the type of the circuit. For X.25 circuits, the value must be set to X25. For DDCMP and Ethernet circuits it is read only and is the same value as t… |
| 1.3.6.1.2.1.18.6.1.1.8 | ColumnphivCircuitService | read-write | mandatory | This value indicates whether or not Network Management allows service operations on a circuit. The values for service-control are as follows: ENABLED SERVICE s… |
| 1.3.6.1.2.1.18.6.1.1.9 | ColumnphivCircuitExecCost | read-write | mandatory | This value represents the routing cost of the circuit. Routing sends messages along the path between two nodes having the smallest cost. |
| 1.3.6.1.2.1.18.6.1.1.10 | ColumnphivCircuitExecHelloTimer | read-write | mandatory | This value determines the frequency of Routing Hello messages sent to the adjacent node on the circuit. |
| 1.3.6.1.2.1.18.6.2 | TablephivCircuitCountTable | not-accessible | mandatory | Information about the counters associated with all circuits currently known. |
| 1.3.6.1.2.1.18.6.2.1 | RowphivCircuitCountEntry | not-accessible | mandatory | Counter information about all circuits currently known |
| 1.3.6.1.2.1.18.6.2.1.1 | ColumnphivCircuitCountSecLastZeroed | read-only | mandatory | Number of seconds since the circuit counters for this circuit were last zeroed. |
| 1.3.6.1.2.1.18.6.2.1.2 | ColumnphivCircuitCountTermPacketsRecd | read-only | mandatory | Number of terminating packets received on this circuit. |
| 1.3.6.1.2.1.18.6.2.1.3 | ColumnphivCircuitCountOriginPackSent | read-only | mandatory | Number of originating packets sent on this circuit. |
| 1.3.6.1.2.1.18.6.2.1.4 | ColumnphivCircuitCountTermCongLoss | read-only | mandatory | Number of terminating congestion losses on this circuit. |
| 1.3.6.1.2.1.18.6.2.1.5 | ColumnphivCircuitCountCorruptLoss | read-only | mandatory | Number of corruption losses on this circuit. |
| 1.3.6.1.2.1.18.6.2.1.6 | ColumnphivCircuitCountTransitPksRecd | read-only | mandatory | Number of Transit packets received on this circuit. |
| 1.3.6.1.2.1.18.6.2.1.7 | ColumnphivCircuitCountTransitPkSent | read-only | mandatory | Number of transit packets sent on this circuit. |
| 1.3.6.1.2.1.18.6.2.1.8 | ColumnphivCircuitCountTransitCongestLoss | read-only | mandatory | Number of transit congestion losses on this circuit. |
| 1.3.6.1.2.1.18.6.2.1.9 | ColumnphivCircuitCountCircuitDown | read-only | mandatory | Number of circuit downs on this circuit. |
| 1.3.6.1.2.1.18.6.2.1.10 | ColumnphivCircuitCountInitFailure | read-only | mandatory | Number of Initialization failures on this circuit. |
| 1.3.6.1.2.1.18.6.2.1.11 | ColumnphivCircuitCountAdjDown | read-only | mandatory | This counter indicates the number of adjacency losses that result from any of the following: Node listener timeout Invalid data received at node listener Unexp… |
| 1.3.6.1.2.1.18.6.2.1.12 | ColumnphivCircuitCountPeakAdj | read-only | mandatory | This counter indicates the maximum number of nodes that are up on the circuit. |
| 1.3.6.1.2.1.18.6.2.1.13 | ColumnphivCircuitCountBytesRecd | read-only | mandatory | Number of bytes received on this circuit. |
| 1.3.6.1.2.1.18.6.2.1.14 | ColumnphivCircuitCountBytesSent | read-only | mandatory | Number of bytes sent on this circuit. |
| 1.3.6.1.2.1.18.6.2.1.15 | ColumnphivCircuitCountDataBlocksRecd | read-only | mandatory | Number of data blocks received on this circuit. |
| 1.3.6.1.2.1.18.6.2.1.16 | ColumnphivCircuitCountDataBlocksSent | read-only | mandatory | Number of data blocks sent on this circuit. |
| 1.3.6.1.2.1.18.6.2.1.17 | ColumnphivCircuitCountUsrBuffUnav | read-only | mandatory | Number of user buffer unavailable errors. |
| 1.3.6.1.2.1.18.6.3 | ScalarphivCircuitOrigQueueLimit | read-write | mandatory | This parameter indicates the maximum number of originating packets that may be outstanding on this circuit. This does not include route-thru traffic. |
| 1.3.6.1.2.1.18.6.4 | ScalarphivCircuitCountZeroCount | read-write | mandatory | When this value is set to 2, all of the counters in the Circuit Counter Table are set to zero. |
| 1.3.6.1.2.1.18.7 | Nodeddcmp | |||
| 1.3.6.1.2.1.18.8 | Nodecontrol | |||
| 1.3.6.1.2.1.18.9 | Nodeethernet | |||
| 1.3.6.1.2.1.18.10 | Nodecounters | |||
| 1.3.6.1.2.1.18.11 | Nodeadjacency | |||
| 1.3.6.1.2.1.18.12 | Nodeline | |||
| 1.3.6.1.2.1.18.14 | NodenonBroadcastLine | |||
| 1.3.6.1.2.1.18.15 | Nodearea | |||
| 1.3.6.1.2.1.19 | Nodechar | |||
| 1.3.6.1.2.1.19.1 | ScalarcharNumber | read-only | mandatory | The number of entries in charPortTable, regardless of their current state. |
| 1.3.6.1.2.1.19.2 | TablecharPortTable | not-accessible | mandatory | A list of port entries. The number of entries is given by the value of charNumber. |
| 1.3.6.1.2.1.19.2.1 | RowcharPortEntry | not-accessible | mandatory | Status and parameter values for a character port. |
| 1.3.6.1.2.1.19.2.1.1 | ColumncharPortIndex | read-only | mandatory | A unique value for each character port. Its value ranges between 1 and the value of charNumber. By convention and if possible, hardware port numbers come first… |
| 1.3.6.1.2.1.19.2.1.2 | ColumncharPortName | read-write | mandatory | An administratively assigned name for the port, typically with some local significance. |
| 1.3.6.1.2.1.19.2.1.3 | ColumncharPortType | read-only | mandatory | The port's type, 'physical' if the port represents an external hardware connector, 'virtual' if it does not. |
| 1.3.6.1.2.1.19.2.1.5 | ColumncharPortReset | read-write | mandatory | A control to force the port into a clean, initial state, both hardware and software, disconnecting all the port's existing sessions. In response to a get-reque… |
| 1.3.6.1.2.1.19.2.1.6 | ColumncharPortAdminStatus | read-write | mandatory | The port's desired state, independent of flow control. 'enabled' indicates that the port is allowed to pass characters and form new sessions. 'disabled' indica… |
| 1.3.6.1.2.1.19.2.1.7 | ColumncharPortOperStatus | read-only | mandatory | The port's actual, operational state, independent of flow control. 'up' indicates able to function normally. 'down' indicates inability to function for adminis… |
| 1.3.6.1.2.1.19.2.1.8 | ColumncharPortLastChange | read-only | mandatory | The value of sysUpTime at the time the port entered its current operational state. If the current state was entered prior to the last reinitialization of the l… |
| 1.3.6.1.2.1.19.2.1.9 | ColumncharPortInFlowType | read-write | mandatory | The port's type of input flow control. 'none' indicates no flow control at this level or below. 'xonXoff' indicates software flow control by recognizing XON an… |
| 1.3.6.1.2.1.19.2.1.10 | ColumncharPortOutFlowType | read-write | mandatory | The port's type of output flow control. 'none' indicates no flow control at this level or below. 'xonXoff' indicates software flow control by recognizing XON a… |
| 1.3.6.1.2.1.19.2.1.11 | ColumncharPortInFlowState | read-only | mandatory | The current operational state of input flow control on the port. 'none' indicates not applicable. 'unknown' indicates this level does not know. 'stop' indicate… |
| 1.3.6.1.2.1.19.2.1.12 | ColumncharPortOutFlowState | read-only | mandatory | The current operational state of output flow control on the port. 'none' indicates not applicable. 'unknown' indicates this level does not know. 'stop' indicat… |
| 1.3.6.1.2.1.19.2.1.13 | ColumncharPortInCharacters | read-only | mandatory | Total number of characters detected as input from the port since system re-initialization and while the port operational state was 'up', 'active', or 'maintena… |
| 1.3.6.1.2.1.19.2.1.14 | ColumncharPortOutCharacters | read-only | mandatory | Total number of characters detected as output to the port since system re-initialization and while the port operational state was 'up', 'active', or 'maintenan… |
| 1.3.6.1.2.1.19.2.1.15 | ColumncharPortAdminOrigin | read-write | mandatory | The administratively allowed origin for establishing session on the port. 'dynamic' allows 'network' or 'local' session establishment. 'none' disallows session… |
| 1.3.6.1.2.1.19.2.1.16 | ColumncharPortSessionMaximum | read-write | mandatory | The maximum number of concurrent sessions allowed on the port. A value of -1 indicates no maximum. Setting the maximum to less than the current number of sessi… |
| 1.3.6.1.2.1.19.2.1.17 | ColumncharPortSessionNumber | read-only | mandatory | The number of open sessions on the port that are in the connecting, connected, or disconnecting state. |
| 1.3.6.1.2.1.19.2.1.18 | ColumncharPortSessionIndex | read-only | mandatory | The value of charSessIndex for the port's first or only active session. If the port has no active session, the agent returns the value zero. |
| 1.3.6.1.2.1.19.3 | TablecharSessTable | not-accessible | mandatory | A list of port session entries. |
| 1.3.6.1.2.1.19.3.1 | RowcharSessEntry | not-accessible | mandatory | Status and parameter values for a character port session. |
| 1.3.6.1.2.1.19.3.1.1 | ColumncharSessPortIndex | read-only | mandatory | The value of charPortIndex for the port to which this session belongs. |
| 1.3.6.1.2.1.19.3.1.2 | ColumncharSessIndex | read-only | mandatory | The session index in the context of the port, a non-zero positive integer. Session indexes within a port need not be sequential. Session indexes may be reused … |
| 1.3.6.1.2.1.19.3.1.3 | ColumncharSessKill | read-write | mandatory | A control to terminate the session. In response to a get-request or get-next-request, the agent always returns 'ready' as the value. Setting the value to 'exec… |
| 1.3.6.1.2.1.19.3.1.4 | ColumncharSessState | read-only | mandatory | The current operational state of the session, disregarding flow control. 'connected' indicates that character data could flow on the network side of session. '… |
| 1.3.6.1.2.1.19.3.1.5 | ColumncharSessProtocol | read-only | mandatory | The network protocol over which the session is running. Other OBJECT IDENTIFIER values may be defined elsewhere, in association with specific protocols. Howeve… |
| 1.3.6.1.2.1.19.3.1.6 | ColumncharSessOperOrigin | read-only | mandatory | The session's source of establishment. |
| 1.3.6.1.2.1.19.3.1.7 | ColumncharSessInCharacters | read-only | mandatory | This session's subset of charPortInCharacters. |
| 1.3.6.1.2.1.19.3.1.8 | ColumncharSessOutCharacters | read-only | mandatory | This session's subset of charPortOutCharacters. |
| 1.3.6.1.2.1.19.3.1.10 | ColumncharSessStartTime | read-only | mandatory | The value of sysUpTime in MIB-2 when the session entered connecting state. |
| 1.3.6.1.2.1.19.4 | NodewellKnownProtocols | |||
| 1.3.6.1.2.1.19.4.1 | NodeprotocolOther | |||
| 1.3.6.1.2.1.19.4.2 | NodeprotocolTelnet | |||
| 1.3.6.1.2.1.19.4.3 | NodeprotocolRlogin | |||
| 1.3.6.1.2.1.19.4.4 | NodeprotocolLat | |||
| 1.3.6.1.2.1.19.4.5 | NodeprotocolX29 | |||
| 1.3.6.1.2.1.19.4.6 | NodeprotocolVtp | |||
| 1.3.6.1.2.1.22 | NodesnmpDot3RptrMgt | |||
| 1.3.6.1.2.1.22.1 | NoderptrBasicPackage | |||
| 1.3.6.1.2.1.22.1 | NoderptrHealth | The rptrHealth trap conveys information related to the operational status of the repeater. This trap is sent either when the value of rptrOperStatus changes, o… | ||
| 1.3.6.1.2.1.22.1.1 | NoderptrRptrInfo | |||
| 1.3.6.1.2.1.22.1.1.1 | ScalarrptrGroupCapacity | read-only | mandatory | The rptrGroupCapacity is the number of groups that can be contained within the repeater. Within each managed repeater, the groups are uniquely numbered in the … |
| 1.3.6.1.2.1.22.1.1.2 | ScalarrptrOperStatus | read-only | mandatory | The rptrOperStatus object indicates the operational state of the repeater. The rptrHealthText object may be consulted for more specific information about the s… |
| 1.3.6.1.2.1.22.1.1.3 | ScalarrptrHealthText | read-only | mandatory | The health text object is a text string that provides information relevant to the operational state of the repeater. Agents may use this string to provide deta… |
| 1.3.6.1.2.1.22.1.1.4 | ScalarrptrReset | read-write | mandatory | Setting this object to reset(2) causes a transition to the START state of Fig 9-2 in section 9 [IEEE 802.3 Std]. Setting this object to noReset(1) has no effec… |
| 1.3.6.1.2.1.22.1.1.5 | ScalarrptrNonDisruptTest | read-write | mandatory | Setting this object to selfTest(2) causes the repeater to perform a agent-specific, non- disruptive self-test that has the following characteristics: a) The na… |
| 1.3.6.1.2.1.22.1.1.6 | ScalarrptrTotalPartitionedPorts | read-only | mandatory | This object returns the total number of ports in the repeater whose current state meets all three of the following criteria: rptrPortOperStatus does not have t… |
| 1.3.6.1.2.1.22.1.2 | NoderptrGroupInfo | |||
| 1.3.6.1.2.1.22.1.2.1 | TablerptrGroupTable | not-accessible | mandatory | Table of descriptive and status information about the groups of ports. |
| 1.3.6.1.2.1.22.1.2.1.1 | RowrptrGroupEntry | not-accessible | mandatory | An entry in the table, containing information about a single group of ports. |
| 1.3.6.1.2.1.22.1.2.1.1.1 | ColumnrptrGroupIndex | read-only | mandatory | This object identifies the group within the repeater for which this entry contains information. This value is never greater than rptrGroupCapacity. |
| 1.3.6.1.2.1.22.1.2.1.1.2 | ColumnrptrGroupDescr | read-only | mandatory | A textual description of the group. This value should include the full name and version identification of the group's hardware type and indicate how the group … |
| 1.3.6.1.2.1.22.1.2.1.1.3 | ColumnrptrGroupObjectID | read-only | mandatory | The vendor's authoritative identification of the group. This value may be allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straight-fo… |
| 1.3.6.1.2.1.22.1.2.1.1.4 | ColumnrptrGroupOperStatus | read-only | mandatory | An object that indicates the operational status of the group. A status of notPresent(4) indicates that the group is temporarily or permanently physically and/o… |
| 1.3.6.1.2.1.22.1.2.1.1.5 | ColumnrptrGroupLastOperStatusChange | read-only | mandatory | An object that contains the value of sysUpTime at the time that the value of the rptrGroupOperStatus object for this group last changed. A value of zero indica… |
| 1.3.6.1.2.1.22.1.2.1.1.6 | ColumnrptrGroupPortCapacity | read-only | mandatory | The rptrGroupPortCapacity is the number of ports that can be contained within the group. Valid range is 1-1024. Within each group, the ports are uniquely numbe… |
| 1.3.6.1.2.1.22.1.3 | NoderptrPortInfo | |||
| 1.3.6.1.2.1.22.1.3.1 | TablerptrPortTable | not-accessible | mandatory | Table of descriptive and status information about the ports. |
| 1.3.6.1.2.1.22.1.3.1.1 | RowrptrPortEntry | not-accessible | mandatory | An entry in the table, containing information about a single port. |
| 1.3.6.1.2.1.22.1.3.1.1.1 | ColumnrptrPortGroupIndex | read-only | mandatory | This object identifies the group containing the port for which this entry contains information. |
| 1.3.6.1.2.1.22.1.3.1.1.2 | ColumnrptrPortIndex | read-only | mandatory | This object identifies the port within the group for which this entry contains information. This value can never be greater than rptrGroupPortCapacity for the … |
| 1.3.6.1.2.1.22.1.3.1.1.3 | ColumnrptrPortAdminStatus | read-write | mandatory | Setting this object to disabled(2) disables the port. A disabled port neither transmits nor receives. Once disabled, a port must be explicitly enabled to resto… |
| 1.3.6.1.2.1.22.1.3.1.1.4 | ColumnrptrPortAutoPartitionState | read-only | mandatory | The autoPartitionState flag indicates whether the port is currently partitioned by the repeater's auto-partition protection. The conditions that cause port par… |
| 1.3.6.1.2.1.22.1.3.1.1.5 | ColumnrptrPortOperStatus | read-only | mandatory | This object indicates the port's operational status. The notPresent(3) status indicates the port is physically removed (note this may or may not be possible de… |
| 1.3.6.1.2.1.22.2 | NoderptrGroupChange | This trap is sent when a change occurs in the group structure of a repeater. This occurs only when a group is logically or physically removed from or added to … | ||
| 1.3.6.1.2.1.22.2 | NoderptrMonitorPackage | |||
| 1.3.6.1.2.1.22.2.1 | NoderptrMonitorRptrInfo | |||
| 1.3.6.1.2.1.22.2.1.1 | ScalarrptrMonitorTransmitCollisions | read-only | mandatory | This counter is incremented every time the repeater state machine enters the TRANSMIT COLLISION state from any state other than ONE PORT LEFT (Ref: Fig 9-2, IE… |
| 1.3.6.1.2.1.22.2.2 | NoderptrMonitorGroupInfo | |||
| 1.3.6.1.2.1.22.2.2.1 | TablerptrMonitorGroupTable | not-accessible | mandatory | Table of performance and error statistics for the groups. |
| 1.3.6.1.2.1.22.2.2.1.1 | RowrptrMonitorGroupEntry | not-accessible | mandatory | An entry in the table, containing total performance and error statistics for a single group. Regular retrieval of the information in this table provides a mean… |
| 1.3.6.1.2.1.22.2.2.1.1.1 | ColumnrptrMonitorGroupIndex | read-only | mandatory | This object identifies the group within the repeater for which this entry contains information. |
| 1.3.6.1.2.1.22.2.2.1.1.2 | ColumnrptrMonitorGroupTotalFrames | read-only | mandatory | The total number of frames of valid frame length that have been received on the ports in this group and for which the FCSError and CollisionEvent signals were … |
| 1.3.6.1.2.1.22.2.2.1.1.3 | ColumnrptrMonitorGroupTotalOctets | read-only | mandatory | The total number of octets contained in the valid frames that have been received on the ports in this group. This counter is the summation of the values of the… |
| 1.3.6.1.2.1.22.2.2.1.1.4 | ColumnrptrMonitorGroupTotalErrors | read-only | mandatory | The total number of errors which have occurred on all of the ports in this group. This counter is the summation of the values of the rptrMonitorPortTotalErrors… |
| 1.3.6.1.2.1.22.2.3 | NoderptrMonitorPortInfo | |||
| 1.3.6.1.2.1.22.2.3.1 | TablerptrMonitorPortTable | not-accessible | mandatory | Table of performance and error statistics for the ports. |
| 1.3.6.1.2.1.22.2.3.1.1 | RowrptrMonitorPortEntry | not-accessible | mandatory | An entry in the table, containing performance and error statistics for a single port. |
| 1.3.6.1.2.1.22.2.3.1.1.1 | ColumnrptrMonitorPortGroupIndex | read-only | mandatory | This object identifies the group containing the port for which this entry contains information. |
| 1.3.6.1.2.1.22.2.3.1.1.2 | ColumnrptrMonitorPortIndex | read-only | mandatory | This object identifies the port within the group for which this entry contains information. |
| 1.3.6.1.2.1.22.2.3.1.1.3 | ColumnrptrMonitorPortReadableFrames | read-only | mandatory | This object is the number of frames of valid frame length that have been received on this port. This counter is incremented by one for each frame received on t… |
| 1.3.6.1.2.1.22.2.3.1.1.4 | ColumnrptrMonitorPortReadableOctets | read-only | mandatory | This object is the number of octets contained in valid frames that have been received on this port. This counter is incremented by OctetCount for each frame re… |
| 1.3.6.1.2.1.22.2.3.1.1.5 | ColumnrptrMonitorPortFCSErrors | read-only | mandatory | This counter is incremented by one for each frame received on this port with the FCSError signal asserted and the FramingError and CollisionEvent signals deass… |
| 1.3.6.1.2.1.22.2.3.1.1.6 | ColumnrptrMonitorPortAlignmentErrors | read-only | mandatory | This counter is incremented by one for each frame received on this port with the FCSError and FramingError signals asserted and CollisionEvent signal deasserte… |
| 1.3.6.1.2.1.22.2.3.1.1.7 | ColumnrptrMonitorPortFrameTooLongs | read-only | mandatory | This counter is incremented by one for each frame received on this port whose OctetCount is greater than maxFrameSize (Ref: 4.4.2.1, IEEE 802.3 Std). If rptrMo… |
| 1.3.6.1.2.1.22.2.3.1.1.8 | ColumnrptrMonitorPortShortEvents | read-only | mandatory | This counter is incremented by one for each CarrierEvent on this port with ActivityDuration less than ShortEventMaxTime. ShortEventMaxTime is greater than 74 b… |
| 1.3.6.1.2.1.22.2.3.1.1.9 | ColumnrptrMonitorPortRunts | read-only | mandatory | This counter is incremented by one for each CarrierEvent on this port that meets one of the following two conditions. Only one test need be made. a) The Activi… |
| 1.3.6.1.2.1.22.2.3.1.1.10 | ColumnrptrMonitorPortCollisions | read-only | mandatory | This counter is incremented by one for any CarrierEvent signal on any port for which the CollisionEvent signal on this port is also asserted. The approximate m… |
| 1.3.6.1.2.1.22.2.3.1.1.11 | ColumnrptrMonitorPortLateEvents | read-only | mandatory | This counter is incremented by one for each CarrierEvent on this port in which the CollIn(X) variable transitions to the value SQE (Ref: 9.6.6.2, IEEE 802.3 St… |
| 1.3.6.1.2.1.22.2.3.1.1.12 | ColumnrptrMonitorPortVeryLongEvents | read-only | mandatory | This counter is incremented by one for each CarrierEvent on this port whose ActivityDuration is greater than the MAU Jabber Lockup Protection timer TW3 (Ref: 9… |
| 1.3.6.1.2.1.22.2.3.1.1.13 | ColumnrptrMonitorPortDataRateMismatches | read-only | mandatory | This counter is incremented by one for each frame received on this port that meets all of the following conditions: a) The CollisionEvent signal is not asserte… |
| 1.3.6.1.2.1.22.2.3.1.1.14 | ColumnrptrMonitorPortAutoPartitions | read-only | mandatory | This counter is incremented by one for each time the repeater has automatically partitioned this port. The conditions that cause port partitioning are specifie… |
| 1.3.6.1.2.1.22.2.3.1.1.15 | ColumnrptrMonitorPortTotalErrors | read-only | mandatory | The total number of errors which have occurred on this port. This counter is the summation of the values of other error counters (for the same port), namely: r… |
| 1.3.6.1.2.1.22.3 | NoderptrAddrTrackPackage | |||
| 1.3.6.1.2.1.22.3 | NoderptrResetEvent | The rptrResetEvent trap conveys information related to the operational status of the repeater. This trap is sent on completion of a repeater reset action. A re… | ||
| 1.3.6.1.2.1.22.3.1 | NoderptrAddrTrackRptrInfo | |||
| 1.3.6.1.2.1.22.3.2 | NoderptrAddrTrackGroupInfo | |||
| 1.3.6.1.2.1.22.3.3 | NoderptrAddrTrackPortInfo | |||
| 1.3.6.1.2.1.22.3.3.1 | TablerptrAddrTrackTable | not-accessible | mandatory | Table of address mapping information about the ports. |
| 1.3.6.1.2.1.22.3.3.1.1 | RowrptrAddrTrackEntry | not-accessible | mandatory | An entry in the table, containing address mapping information about a single port. |
| 1.3.6.1.2.1.22.3.3.1.1.1 | ColumnrptrAddrTrackGroupIndex | read-only | mandatory | This object identifies the group containing the port for which this entry contains information. |
| 1.3.6.1.2.1.22.3.3.1.1.2 | ColumnrptrAddrTrackPortIndex | read-only | mandatory | This object identifies the port within the group for which this entry contains information. |
| 1.3.6.1.2.1.22.3.3.1.1.3 | ColumnrptrAddrTrackLastSourceAddress | read-only | deprecated | This object is the SourceAddress of the last readable frame (i.e., counted by rptrMonitorPortReadableFrames) received by this port. This object has been deprec… |
| 1.3.6.1.2.1.22.3.3.1.1.4 | ColumnrptrAddrTrackSourceAddrChanges | read-only | mandatory | This counter is incremented by one for each time that the rptrAddrTrackLastSourceAddress attribute for this port has changed. This may indicate whether a link … |
| 1.3.6.1.2.1.22.3.3.1.1.5 | ColumnrptrAddrTrackNewLastSrcAddress | read-only | mandatory | This object is the SourceAddress of the last readable frame (i.e., counted by rptrMonitorPortReadableFrames) received by this port. If no frames have been rece… |
| 1.3.6.1.4.1.33 | NodeiTouch | |||
| 1.3.6.1.4.1.33.1 | NodexSystem | |||
| 1.3.6.1.4.1.33.1.1 | NoderesourceLack | Indication that the system incremented the corresponding value of resLacks. | ||
| 1.3.6.1.4.1.33.1.1 | ScalarsysIdent | read-write | mandatory | An identification string for local and remote displays. Corresponds directly to SERVER IDENTIFICATION and the value labeled 'Identification:' on the SERVER CHA… |
| 1.3.6.1.4.1.33.1.2 | ScalarsysDefineMode | read-write | mandatory | The system's operation with regard to DEFINE commands. 'permOnly' indicates that DEFINE commands modify only the permanent data base. 'operAndPerm' indicates t… |
| 1.3.6.1.4.1.33.1.3 | ScalarsysDateTime | read-write | mandatory | The system's current local date and time. Corresponds directly to SERVER DATE and SERVER TIME and the value in various displays. |
| 1.3.6.1.4.1.33.1.4 | ScalarsysTimeZone | read-write | mandatory | The adjustment to apply to a universal (Greenwich) time received when down-line loaded, comprising two octets. The first octet is the number of hours west of u… |
| 1.3.6.1.4.1.33.1.5 | ScalarsysLoadSoftware | read-write | mandatory | The software file name to request for down-line load of the server. Corresponds directly to SERVER SOFTWARE, and the value labeled 'Software:' in the SERVER CH… |
| 1.3.6.1.4.1.33.1.6 | ScalarsysDump | read-write | mandatory | Control for dumping the system's memory when the system crashes. Corresponds directly to SERVER DUMP and the presence of 'Dump' under the label 'Enabled Charac… |
| 1.3.6.1.4.1.33.1.7 | ScalarsysMaintenancePassword | read-write | mandatory | The password a management system must supply to force the system to reboot or use the system's remote console via the Maintenance Operation Protocol (MOP). Cor… |
| 1.3.6.1.4.1.33.1.8 | ScalarsysLocalName | read-write | mandatory | The system's local name. Corresponds directly to SERVER NAME and the value labeled 'Name:' in the SERVER CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.1.9 | ScalarsysSoftwareVersionType | read-only | mandatory | The software version variant running in the system. Corresponds to the letter in the software version in the SERVER CHARACTERISTICS display. alpha 'A': alpha t… |
| 1.3.6.1.4.1.33.1.10 | ScalarsysSoftwareVersion | read-only | mandatory | The software version running in the system. In order, the octets contain major version, minor version, ECO, and pre-release number. Corresponds to the numbers … |
| 1.3.6.1.4.1.33.1.11 | ScalarsysRomVersion | read-only | mandatory | The firmware version of the bootstrap ROM installed in the system. Corresponds directly to the value labeled 'Rom' in the SERVER CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.1.12 | ScalarsysHardwareType | read-only | mandatory | The type of hardware on which the system is running. Corresponds directly to the value labeled 'Hardware Type:' in the UNIT display. |
| 1.3.6.1.4.1.33.1.13 | ScalarsysHardwareVersion | read-only | mandatory | This version of hardware on which the system is running. Corresponds directly to part of the value labeled 'HW' in the SERVER CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.1.14 | ScalarsysChassisType | read-only | mandatory | The type of chassis in which the system is running. Corresponds directly to part of the value labeled 'HW' in the SERVER CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.1.15 | ScalarsysChassisVersion | read-only | mandatory | This version of chassis in which the system is running. Corresponds directly to part of the value labeled 'HW' in the SERVER CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.1.16 | ScalarsysCrash | read-write | mandatory | Control to cause this system to crash. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to … |
| 1.3.6.1.4.1.33.1.17 | ScalarsysInitialize | read-write | mandatory | Control to cause this system to reset its software to initial load values, typically by reloading. When executing an initialize command, the system observes th… |
| 1.3.6.1.4.1.33.1.18 | ScalarsysInitializeDelay | read-write | mandatory | The number of minutes to delay before beginning the system initialization process as executed with sysInitialize. This value cannot be set outside a set-reques… |
| 1.3.6.1.4.1.33.1.19 | ScalarsysZeroAll | read-write | mandatory | Control to zero all counters. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' h… |
| 1.3.6.1.4.1.33.1.20 | ScalarsysZeroBase | read-write | mandatory | Control to zero all base counters. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'rea… |
| 1.3.6.1.4.1.33.1.21 | ScalarsysZeroBaseTime | read-only | mandatory | The number hundredths of a second since the most recent zeroing of the base counters, such as through execution of sysZeroAll or sysZeroBase. Corresponds direc… |
| 1.3.6.1.4.1.33.1.22 | ScalarsysLoaderName | read-only | mandatory | The name of the system that provided this system's running software. Corresponds directly to the value labeled 'Primary Host:' in the SERVER STATUS display. |
| 1.3.6.1.4.1.33.1.23 | ScalarsysLoaderAddressType | read-only | mandatory | The type of network address contained in sysLoaderAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'local' mean… |
| 1.3.6.1.4.1.33.1.24 | ScalarsysLoaderAddress | read-only | mandatory | The network address of the system that provided this system's running software. Corresponds directly to the value labeled 'Load Address:' in the SERVER STATUS … |
| 1.3.6.1.4.1.33.1.25 | ScalarsysDumperAddressType | read-only | mandatory | The type of network address contained in sysDumperAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'local' mean… |
| 1.3.6.1.4.1.33.1.26 | ScalarsysDumperAddress | read-only | mandatory | The network address of the system that most recently accepted a crash dump from this system. Corresponds directly to the value labeled 'Dump Address:' in the S… |
| 1.3.6.1.4.1.33.1.27 | ScalarsysResourceLacks | read-only | mandatory | The number of times a local resource allocation failed, for example due to lack of dynamic memory. Corresponds directly to the value labeled 'Resource Errors:'… |
| 1.3.6.1.4.1.33.1.28 | ScalarsysChassisState | read-only | mandatory | For chassis-based systems, the state of the overall chassis. 'notApplicable' indicates the system is not chassis based. 'noFault' indicates no current chassis … |
| 1.3.6.1.4.1.33.1.29 | ScalarsysChassisFaultTransitions | read-only | mandatory | The number of times this system has seen sysChassisState switch from 'noFault' to 'fault' or from 'fault' to 'noFault'. Corresponds directly to the value label… |
| 1.3.6.1.4.1.33.1.30 | ScalarsysResourceNumber | read-only | mandatory | The number of resource entries in the Resource table. |
| 1.3.6.1.4.1.33.1.31 | ScalarsysFeatureNumber | read-only | mandatory | The number of feature entries in the Feature table. |
| 1.3.6.1.4.1.33.1.32 | TableresTable | not-accessible | mandatory | A list of resource entries. The number of entries is given by the value of sysResourceNumber. |
| 1.3.6.1.4.1.33.1.32.1 | RowresEntry | not-accessible | mandatory | Status values for a system resource. |
| 1.3.6.1.4.1.33.1.32.1.1 | ColumnresType | read-only | mandatory | Identification of a resource type. Typically corresponds directly to a label such as 'Processes:' in the SERVER ALTERNATE STATUS display. |
| 1.3.6.1.4.1.33.1.32.1.2 | ColumnresCurrent | read-only | mandatory | The number of resources currently in use on the system. Typically corresponds directly to a value labeled 'Cur' in the SERVER ALTERNATE STATUS display. |
| 1.3.6.1.4.1.33.1.32.1.3 | ColumnresWorst | read-only | mandatory | The highest or lowest value of resCurrent since system initialization. Typically corresponds directly to a value labeled 'High' or 'Low' in the SERVER ALTERNAT… |
| 1.3.6.1.4.1.33.1.32.1.4 | ColumnresAdminMaximum | read-write | mandatory | The desired maximum possible number of resources in the system. In many cases, ACCESS to this object for a particular resType is read-only. Typically correspon… |
| 1.3.6.1.4.1.33.1.32.1.5 | ColumnresLacks | read-only | mandatory | The number of times since system initialization that the system could not obtain the resource because none were available. Typically corresponds directly to a … |
| 1.3.6.1.4.1.33.1.32.1.6 | ColumnresLackTime | read-only | mandatory | The local system date and time when resLack last increased. Typically corresponds directly to a value labeled 'Last Occurred' in the SERVER ALTERNATE STATUS di… |
| 1.3.6.1.4.1.33.1.32.1.7 | ColumnresOperMaximum | read-only | mandatory | The current maximum possible number of resources in the system. Typically corresponds directly to a value labeled 'Max' in the SERVER ALTERNATE STATUS display … |
| 1.3.6.1.4.1.33.1.33 | TablefeatTable | not-accessible | mandatory | A list of feature entries. The number of entries is given by the value of sysFeatureNumber. |
| 1.3.6.1.4.1.33.1.33.1 | RowfeatEntry | not-accessible | mandatory | Status values for a system feature. |
| 1.3.6.1.4.1.33.1.33.1.1 | ColumnfeatType | read-only | mandatory | Identification of a feature type. Corresponds to a SERVER feature keyword. |
| 1.3.6.1.4.1.33.1.33.1.2 | ColumnfeatStatus | read-write | mandatory | The status of the feature as of the next system initialization. Corresponds to the presence of the feature's lable following the label 'Enabled Feature(s): in … |
| 1.3.6.1.4.1.33.1.33.1.3 | ColumnfeatKey | read-write | mandatory | The key a management system must supply to make a locked feature available. When unlocking a feature and the management system does not supply a value for feat… |
| 1.3.6.1.4.1.33.1.34 | NodexBootControl | |||
| 1.3.6.1.4.1.33.1.34.1 | ScalarbootControlLoadInternetFile | read-write | deprecated | The filename to request when loading an image via TFTP. Corresponds directly to SERVER INTERNET LOAD FILE and the value labeled 'Internet Load File:' in the SE… |
| 1.3.6.1.4.1.33.1.34.2 | ScalarbootControlLoadInternetServer | read-write | deprecated | The internet address of the server to use when loading an image via TFTP. Corresponds directly to SERVER INTERNET LOAD HOST and the value labeled 'Internet Loa… |
| 1.3.6.1.4.1.33.1.34.3 | ScalarbootControlLoadInternetGateway | read-write | deprecated | The internet address of the gateway to use when loading an image via TFTP. Corresponds directly to SERVER INTERNET LOAD GATEWAY and the value labeled 'Internet… |
| 1.3.6.1.4.1.33.1.34.4 | ScalarbootControlLoadBootpTftp | read-write | deprecated | Control for loading via the combination of BOOTP and TFTP. Corresponds to SERVER LOAD PROTOCOL BOOTPTFTP and the presence of 'BOOTP/TFTP/' following the label … |
| 1.3.6.1.4.1.33.1.34.5 | ScalarbootControlLoadTftpDirect | read-write | deprecated | Control for loading via directed TFTP. Corresponds to SERVER LOAD PROTOCOL TFTPDIRECT and the presence of 'TFTPDIRECT' following the label 'Load Protocols Enab… |
| 1.3.6.1.4.1.33.1.34.6 | ScalarbootControlLoadLocal | read-write | deprecated | Control for loading from a local medium. Corresponds to SERVER LOAD PROTOCOL LOCAL and the presence of 'LOCAL' following the label 'Load Protocols Enabled:' in… |
| 1.3.6.1.4.1.33.1.34.7 | ScalarbootControlLoadMop | read-write | deprecated | Control for loading via DEC MOP. Corresponds to SERVER LOAD PROTOCOL MOP and the presence of 'MOP' following the label 'Load Protocols Enabled:' in the SERVER … |
| 1.3.6.1.4.1.33.1.34.8 | ScalarbootControlLoadProprietary | read-write | deprecated | Control for loading via ITouch-proprietary extended MOP. Corresponds to SERVER LOAD PROTOCOL PROPRIETARY and the presence of 'Proprietary' following the label … |
| 1.3.6.1.4.1.33.1.34.9 | ScalarbootControlLoadRarpTftp | read-write | deprecated | Control for loading via the combination of RARP and TFTP. Corresponds to SERVER LOAD PROTOCOL RARPTFTP and the presence of 'RARP/TFTP' following the label 'Loa… |
| 1.3.6.1.4.1.33.1.34.10 | ScalarbootControlDumpBootpTftp | read-write | deprecated | Control for dumping via the combination of BOOTP and TFTP. Corresponds to SERVER DUMP PROTOCOL BOOTPTFTP and the presence of 'BOOTP/TFTP' following the label '… |
| 1.3.6.1.4.1.33.1.34.11 | ScalarbootControlDumpLocal | read-write | deprecated | Control for dumping to a local medium. Corresponds to SERVER DUMP PROTOCOL LOCAL and the presence of 'Local' following the label 'Dump Protocols Enabled:' in t… |
| 1.3.6.1.4.1.33.1.34.12 | ScalarbootControlDumpMop | read-write | deprecated | Control for dumping via DEC MOP. Corresponds to SERVER DUMP PROTOCOL MOP and the presence of 'MOP' following the label 'Dump Protocols Enabled:' in the SERVER … |
| 1.3.6.1.4.1.33.1.34.13 | ScalarbootControlDumpProprietary | read-write | deprecated | Control for dumping via ITouch-proprietary extended MOP. Corresponds to SERVER DUMP PROTOCOL PROPRIETARY and the presence of 'Proprietary' following the label … |
| 1.3.6.1.4.1.33.1.34.14 | ScalarbootControlDumpRarpTftp | read-write | deprecated | Control for dumping via the combination of RARP and TFTP. Corresponds to SERVER DUMP PROTOCOL RARPTFTP and the presence of 'RARP/TFTP' following the label 'Dum… |
| 1.3.6.1.4.1.33.1.34.15 | ScalarbootControlParamBootpTftp | read-write | deprecated | Control for loading parameters via the combination of BOOTP and TFTP. Corresponds to SERVER PARAMETER PROTOCOL MOP and the presence of 'BOOTP/TFTP' following t… |
| 1.3.6.1.4.1.33.1.34.16 | ScalarbootControlParamLocal | read-write | deprecated | Control for loading parameters from a local medium. Corresponds to SERVER PARAMETER PROTOCOL LOCAL and the presence of 'LOCAL' following the label 'Parameter P… |
| 1.3.6.1.4.1.33.1.34.17 | ScalarbootControlParamMop | read-write | deprecated | Control for loading parameters via DEC MOP. Corresponds to SERVER PARAMETER PROTOCOL MOP and the presence of 'MOP' following the label 'Parameter Protocols Ena… |
| 1.3.6.1.4.1.33.1.34.18 | ScalarbootControlParamProprietary | read-write | deprecated | Control for loading parameters via ITouch-proprietary extended MOP. Corresponds to SERVER PARAMETER PROTOCOL PROPRIETARY and the presence of 'Proprietary' foll… |
| 1.3.6.1.4.1.33.1.34.19 | ScalarbootControlParamRarpTftp | read-write | deprecated | Control for loading parameters via the combination of RARP and TFTP. Corresponds to SERVER PARAMETER PROTOCOL RARPTFTP and the presence of 'RARP/TFTP' followin… |
| 1.3.6.1.4.1.33.1.35 | ScalarsysInstalledMemory | read-only | mandatory | The total number of bytes of main memory installed in the system. Corresponds directly to the value labeled 'Installed' on the SERVER ALTERNATE STATUS display.… |
| 1.3.6.1.4.1.33.1.36 | ScalarsysTemperatureLevel | read-only | mandatory | The temperature level of the system. 'unknown' indicates the system does not support a temperature sensor. 'normal' indicates a normal temperature level. 'high… |
| 1.3.6.1.4.1.33.1.37 | TablebootRecordTable | not-accessible | mandatory | A list of boot control records. |
| 1.3.6.1.4.1.33.1.37.1 | RowbootRecordEntry | not-accessible | mandatory | Values for a boot record. |
| 1.3.6.1.4.1.33.1.37.1.1 | ColumnbootRecordIndex | read-only | mandatory | An index value that uniquely identifies a boot control record entry, from 1 to the number of entries for the system. |
| 1.3.6.1.4.1.33.1.37.1.2 | ColumnbootRecordLoadInternetFile | read-write | mandatory | The filename to request when loading an image via TFTP. Corresponds directly to SERVER INTERNET LOAD FILE and the value labeled 'Internet Load File:' in the SE… |
| 1.3.6.1.4.1.33.1.37.1.3 | ColumnbootRecordLoadInternetServer | read-write | mandatory | The internet address of the server to use when loading an image via TFTP. Corresponds directly to SERVER INTERNET LOAD HOST and the value labeled 'Internet Loa… |
| 1.3.6.1.4.1.33.1.37.1.4 | ColumnbootRecordLoadInternetGateway | read-write | mandatory | The internet address of the gateway to use when loading an image via TFTP. Corresponds directly to SERVER INTERNET LOAD GATEWAY and the value labeled 'Internet… |
| 1.3.6.1.4.1.33.1.37.1.5 | ColumnbootRecordLoadBootpTftp | read-write | mandatory | Control for loading via the combination of BOOTP and TFTP. Corresponds to SERVER LOAD PROTOCOL BOOTPTFTP and the presence of 'BOOTP/TFTP/' following the label … |
| 1.3.6.1.4.1.33.1.37.1.6 | ColumnbootRecordLoadTftpDirect | read-write | mandatory | Control for loading via directed TFTP. Corresponds to SERVER LOAD PROTOCOL TFTPDIRECT and the presence of 'TFTPDIRECT' following the label 'Load Protocols Enab… |
| 1.3.6.1.4.1.33.1.37.1.7 | ColumnbootRecordLoadLocal | read-write | mandatory | Control for loading from a local medium. Corresponds to SERVER LOAD PROTOCOL LOCAL and the presence of 'LOCAL' following the label 'Load Protocols Enabled:' in… |
| 1.3.6.1.4.1.33.1.37.1.8 | ColumnbootRecordLoadMop | read-write | mandatory | Control for loading via DEC MOP. Corresponds to SERVER LOAD PROTOCOL MOP and the presence of 'MOP' following the label 'Load Protocols Enabled:' in the SERVER … |
| 1.3.6.1.4.1.33.1.37.1.9 | ColumnbootRecordLoadProprietary | read-write | mandatory | Control for loading via ITouch-proprietary extended MOP. Corresponds to SERVER LOAD PROTOCOL PROPRIETARY and the presence of 'Proprietary' following the label … |
| 1.3.6.1.4.1.33.1.37.1.10 | ColumnbootRecordLoadRarpTftp | read-write | mandatory | Control for loading via the combination of RARP and TFTP. Corresponds to SERVER LOAD PROTOCOL RARPTFTP and the presence of 'RARP/TFTP' following the label 'Loa… |
| 1.3.6.1.4.1.33.1.37.1.11 | ColumnbootRecordDumpBootpTftp | read-write | mandatory | Control for dumping via the combination of BOOTP and TFTP. Corresponds to SERVER DUMP PROTOCOL BOOTPTFTP and the presence of 'BOOTP/TFTP' following the label '… |
| 1.3.6.1.4.1.33.1.37.1.12 | ColumnbootRecordDumpLocal | read-write | mandatory | Control for dumping to a local medium. Corresponds to SERVER DUMP PROTOCOL LOCAL and the presence of 'Local' following the label 'Dump Protocols Enabled:' in t… |
| 1.3.6.1.4.1.33.1.37.1.13 | ColumnbootRecordDumpMop | read-write | mandatory | Control for dumping via DEC MOP. Corresponds to SERVER DUMP PROTOCOL MOP and the presence of 'MOP' following the label 'Dump Protocols Enabled:' in the SERVER … |
| 1.3.6.1.4.1.33.1.37.1.14 | ColumnbootRecordDumpProprietary | read-write | mandatory | Control for dumping via ITouch-proprietary extended MOP. Corresponds to SERVER DUMP PROTOCOL PROPRIETARY and the presence of 'Proprietary' following the label … |
| 1.3.6.1.4.1.33.1.37.1.15 | ColumnbootRecordDumpRarpTftp | read-write | mandatory | Control for dumping via the combination of RARP and TFTP. Corresponds to SERVER DUMP PROTOCOL RARPTFTP and the presence of 'RARP/TFTP' following the label 'Dum… |
| 1.3.6.1.4.1.33.1.37.1.16 | ColumnbootRecordParamBootpTftp | read-write | mandatory | Control for loading parameters via the combination of BOOTP and TFTP. Corresponds to SERVER PARAMETER PROTOCOL MOP and the presence of 'BOOTP/TFTP' following t… |
| 1.3.6.1.4.1.33.1.37.1.17 | ColumnbootRecordParamLocal | read-write | mandatory | Control for loading parameters from a local medium. Corresponds to SERVER PARAMETER PROTOCOL LOCAL and the presence of 'LOCAL' following the label 'Parameter P… |
| 1.3.6.1.4.1.33.1.37.1.18 | ColumnbootRecordParamMop | read-write | mandatory | Control for loading parameters via DEC MOP. Corresponds to SERVER PARAMETER PROTOCOL MOP and the presence of 'MOP' following the label 'Parameter Protocols Ena… |
| 1.3.6.1.4.1.33.1.37.1.19 | ColumnbootRecordParamProprietary | read-write | mandatory | Control for loading parameters via ITouch-proprietary extended MOP. Corresponds to SERVER PARAMETER PROTOCOL PROPRIETARY and the presence of 'Proprietary' foll… |
| 1.3.6.1.4.1.33.1.37.1.20 | ColumnbootRecordParamRarpTftp | read-write | mandatory | Control for loading parameters via the combination of RARP and TFTP. Corresponds to SERVER PARAMETER PROTOCOL RARPTFTP and the presence of 'RARP/TFTP' followin… |
| 1.3.6.1.4.1.33.1.37.1.21 | ColumnbootRecordStatus | read-write | mandatory | The status of the entry. Set to 'disabled' to disable the entry. |
| 1.3.6.1.4.1.33.1.37.1.22 | ColumnbootRecordMopFile | read-write | mandatory | The software file name to request for down-line load of the server via MOP or XMOP. |
| 1.3.6.1.4.1.33.1.37.1.23 | ColumnbootRecordInternetAddress | read-write | mandatory | The internet address of the system is to use for itself when loading via TFTP. The value 0.0.0.0 indicates default action. |
| 1.3.6.1.4.1.33.1.37.1.24 | ColumnbootRecordParamTftpDirect | read-write | mandatory | Control for loading parameters via the protocol DTFTP. Corresponds to SERVER PARAMETER PROTOCOL DTFTP and the presence of 'DTFTP' following the label 'Paramete… |
| 1.3.6.1.4.1.33.1.37.1.25 | ColumnbootRecordInternetDelimiter | read-write | mandatory | The character separating the load file directory name from the file name. |
| 1.3.6.1.4.1.33.1.38 | ScalarsysLastAgentError | read-only | mandatory | The most recent error the agent encountered in attempting to satisfy an SNMP request. Reading this value has the side effect of resetting it to 'noError'. |
| 1.3.6.1.4.1.33.1.40 | ScalarsysRcpMulticast | read-write | mandatory | Control for sending of the MOP RCP system identifier message. Corresponds directly to the presence of 'RCP Multicast' under the label 'Enabled Characteristics'… |
| 1.3.6.1.4.1.33.1.41 | ScalarsysTimeServerAddress | read-only | mandatory | The address of the time server, either an IpAddr or an ethernet address. |
| 1.3.6.1.4.1.33.1.46 | ScalarsysTimeServerConfiguredAddress | read-write | mandatory | The address of a configured time server (, either an IpAddr or an ethernet address). |
| 1.3.6.1.4.1.33.1.47 | ScalarsysTimeServerConfiguredStatus | read-write | mandatory | Control whether the sysTimeServerConfiguredAddress is the only time server used to obtain the time (REQUIRED), the first time server used to obtain the time (E… |
| 1.3.6.1.4.1.33.1.48 | ScalarsysBootRecordOverrideDefinedAddress | read-write | mandatory | Control to override the internally defined Internet address with that obtained from the bootp loading protocol. |
| 1.3.6.1.4.1.33.1.49 | ScalarsysBootRecordMessageEnable | read-write | mandatory | Control to display load status messages during reboot. Corresponds directly to the value labeled 'Status Message:' in the SERVER LOADDUMP display. |
| 1.3.6.1.4.1.33.1.50 | ScalarsysBootRecordParamDefaults | read-write | mandatory | Control to use default parameters upon the next reboot after which time this control reverts to disabled. This control only applies to stand-alone devices. Cor… |
| 1.3.6.1.4.1.33.1.78 | ScalarsysLoginAuthFailureTrapType | read-only | mandatory | Indicates the type of authentication failure which last occurred. |
| 1.3.6.1.4.1.33.1.81 | ScalarsysLoginAuthTrapIdentity | read-only | mandatory | An identification string for the circuit or port where an authentication failure last occurred. |
| 1.3.6.1.4.1.33.1.82 | ScalarsysLocalScriptServer | read-write | mandatory | Control to allow script serving for this system from a script residing in a local flash card. |
| 1.3.6.1.4.1.33.1.83 | ScalarsysInReachManagementSecurityStatus | read-only | mandatory | Indicates whether per port authentication is in use. This includes username, password, privilege level, and list of power outlets controlled by that user, or c… |
| 1.3.6.1.4.1.33.1.84 | ScalarsysProductName | read-only | mandatory | Displays the product name of this system. |
| 1.3.6.1.4.1.33.1.85 | ScalarsysModemPresent | read-only | mandatory | Indicates whether this system has a built-in modem. |
| 1.3.6.1.4.1.33.1.86 | ScalarsysCauseAction | read-write | mandatory | A control for toggling the cause action feature. Corresponds directly to the presence of 'Trigger/Action' under the label 'Enabled Characteristics:' in the SER… |
| 1.3.6.1.4.1.33.1.87 | ScalarsysWebServerConfigAdminStatus | read-write | mandatory | A control for bring the web server up or down. Corresponds directly to the presence of 'Web Server' under the label 'Enabled Characteristics:' in the SERVER CH… |
| 1.3.6.1.4.1.33.1.88 | ScalarsysTl1SourceIdentifier | read-write | mandatory | The source identifier (SID) is the server name used by TL1 to identify the server. |
| 1.3.6.1.4.1.33.1.89 | ScalarsysInitializeDelayParameter | read-write | mandatory | Control to begin the system initialization process providing that at least one parameter server is current. Corresponds directly to the INITIALIZE DELAY PARAME… |
| 1.3.6.1.4.1.33.4 | NodexInternetDep | |||
| 1.3.6.1.4.1.33.5 | NodebridgeDep | |||
| 1.3.6.1.4.1.33.6 | NodexBootServer | |||
| 1.3.6.1.4.1.33.6.1 | NodexBsBasic | |||
| 1.3.6.1.4.1.33.6.1.1 | ScalarbasicLogLimit | read-write | mandatory | Maximum allowed number of kilobytes for recording events. Corresponds directly to MANAGER LOG FILE SIZE and the value labeled 'Log File Size:' in the MANAGER C… |
| 1.3.6.1.4.1.33.6.1.2 | ScalarbasicActiveLimit | read-write | mandatory | Maximum allowed number of simultaneous service dialogs. Corresponds directly to MANAGER SIMULTANEOUS and the value labeled 'Maximum simultaneous requests:' in … |
| 1.3.6.1.4.1.33.6.1.3 | ScalarbasicActiveNumber | read-only | mandatory | Number of active service dialogs. Corresponds indirectly to the list of active clients in the MANAGER STATUS display. |
| 1.3.6.1.4.1.33.6.1.4 | ScalarbasicClientNumber | read-only | mandatory | Number of defined clients. Corresponds indirectly to the list of defined clients in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays. |
| 1.3.6.1.4.1.33.6.1.5 | ScalarbasicOffersSent | read-only | mandatory | Total number of service offers sent in response to client requests. Corresponds directly to the value labeled 'Total service offers sent:' in the MANAGER STATU… |
| 1.3.6.1.4.1.33.6.1.6 | ScalarbasicEventTotal | read-only | mandatory | Total number of events that have been written to the event log since it was last purged. This may be less than the number currently in the log. Corresponds dir… |
| 1.3.6.1.4.1.33.6.1.7 | ScalarbasicEventPurge | read-write | mandatory | Control to cause emptying the event log. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value t… |
| 1.3.6.1.4.1.33.6.1.8 | TableactiveTable | not-accessible | mandatory | A list of active client dialog entries. The number of entries is given by basicActiveNumber. |
| 1.3.6.1.4.1.33.6.1.8.1 | RowactiveEntry | not-accessible | mandatory | Parameter values for an active client dialog entry. |
| 1.3.6.1.4.1.33.6.1.8.1.1 | ColumnactiveIdentificationType | read-only | mandatory | The type of identification value in activeIdentification. Corresponds indirectly to the value labeled 'EthernetAddress' in the MANAGER STATUS display. |
| 1.3.6.1.4.1.33.6.1.8.1.2 | ColumnactiveIdentification | read-only | mandatory | Identification of the active partner. Corresponds directly to the value labeled 'EthernetAddress' in the MANAGER STATUS display. |
| 1.3.6.1.4.1.33.6.1.8.1.3 | ColumnactiveFunction | read-only | mandatory | The function the server is performing with the partner. Corresponds directly to the value labeled 'Function' in the MANAGER STATUS display. |
| 1.3.6.1.4.1.33.6.1.8.1.4 | ColumnactiveSoftwareVersionType | read-only | mandatory | If activeFunction is 'load', the software version being sent to the client, otherwise 'notApplicable'. Corresponds to the letter in the software version labele… |
| 1.3.6.1.4.1.33.6.1.8.1.5 | ColumnactiveSoftwareVersion | read-only | mandatory | If activeFunction is 'load', the 4-byte software version being sent to the client, otherwise zero length. In order, the octets contain major version, minor ver… |
| 1.3.6.1.4.1.33.6.1.8.1.6 | ColumnactiveParameterVersion | read-only | mandatory | If activeFunction is 'parameterStore', the parameter version being stored by the client, otherwise zero. Corresponds directly to the value labeled 'Version' in… |
| 1.3.6.1.4.1.33.6.1.8.1.7 | ColumnactiveCurrentSequence | read-only | mandatory | The current dialog sequence number. Corresponds directly to the value labeled 'Seq' in the MANAGER STATUS display. |
| 1.3.6.1.4.1.33.6.1.8.1.8 | ColumnactiveBytesRemaining | read-only | mandatory | The number of bytes remaining to be transferred in the dialog. Corresponds directly to the value labeled 'Left' in the MANAGER STATUS display. |
| 1.3.6.1.4.1.33.6.1.8.1.9 | ColumnactiveFile | read-only | mandatory | The name of the file being used in the dialog. Corresponds directly to the value labeled 'File' in the MANAGER STATUS display. |
| 1.3.6.1.4.1.33.6.1.8.1.10 | ColumnactiveStatus | read-only | mandatory | The final status of the most recent attempt to get an image. Corresponds directly to the value labeled 'Get Status:' in the DEVICE STATUS display. |
| 1.3.6.1.4.1.33.6.1.8.1.11 | ColumnactiveState | read-only | mandatory | The dynamic state of an active attempt to get an image. Corresponds directly to the value labeled 'Get State:' in the DEVICE STATUS display. |
| 1.3.6.1.4.1.33.6.1.9 | TableclientTable | not-accessible | mandatory | A list of client data base entries. The number of entries is given by basicClientNumber. |
| 1.3.6.1.4.1.33.6.1.9.1 | RowclientEntry | not-accessible | mandatory | Parameter values for a client data base entry. |
| 1.3.6.1.4.1.33.6.1.9.1.1 | ColumnclientIdentificationType | read-only | mandatory | The type of identification value in clientIdentification. Corresponds directly to MANAGER NODE, MANAGER GLOBAL, and MANAGER LOCAL, and the value labeled 'Ether… |
| 1.3.6.1.4.1.33.6.1.9.1.2 | ColumnclientIdentification | read-only | mandatory | Identification of the client, either a hardware type or an Ethernet address, depending on clientIdentificationType. Corresponds directly to MANAGER NODE, MANAG… |
| 1.3.6.1.4.1.33.6.1.9.1.3 | ColumnclientEntryStatus | read-write | mandatory | The status of the entry. Set to 'invalid' to remove the entry, which corresponds directly to the PURGE LOCAL, PURGE GLOBAL, and PURGE NODE commands. Actual rem… |
| 1.3.6.1.4.1.33.6.1.9.1.4 | ColumnclientName | read-write | mandatory | A name that may be used to identify the client. Corresponds directly to the value labeled 'Name' in the MANAGER NODE display. |
| 1.3.6.1.4.1.33.6.1.9.1.5 | ColumnclientLoadFile | read-write | mandatory | The file with the client's load image. Corresponds directly to the value labeled 'Load File' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays. |
| 1.3.6.1.4.1.33.6.1.9.1.6 | ColumnclientDiagnosticFile | read-write | mandatory | The file with the client's diagnostic test image. Corresponds directly to the value labeled 'Diag File' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE … |
| 1.3.6.1.4.1.33.6.1.9.1.7 | ColumnclientLoadService | read-write | mandatory | Control for allowing load service for the client. Corresponds directly to the value labeled 'Load' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displ… |
| 1.3.6.1.4.1.33.6.1.9.1.8 | ColumnclientDumpService | read-write | mandatory | Control for allowing dump service for the client. Corresponds directly to the value labeled 'Dump' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displ… |
| 1.3.6.1.4.1.33.6.1.10 | TablenamedTable | not-accessible | mandatory | A list of named client data base entries. The number of entries is given by basicClientNumber. |
| 1.3.6.1.4.1.33.6.1.10.1 | RownamedEntry | not-accessible | mandatory | Parameter values for a named client data base entry. |
| 1.3.6.1.4.1.33.6.1.10.1.1 | ColumnnamedIdentificationType | read-only | mandatory | The type of identification value in namedIdentification. Corresponds directly to MANAGER NODE, MANAGER GLOBAL, and MANAGER LOCAL, and the value labeled 'Ethern… |
| 1.3.6.1.4.1.33.6.1.10.1.2 | ColumnnamedIdentification | read-only | mandatory | Identification of the client, either a hardware type or an Ethernet address, depending on namedIdentificationType. Corresponds directly to MANAGER NODE, MANAGE… |
| 1.3.6.1.4.1.33.6.1.10.1.3 | ColumnnamedEntryStatus | read-only | mandatory | The status of the entry. Set to 'invalid' to remove the entry, which corresponds directly to the PURGE LOCAL, PURGE GLOBAL, and PURGE NODE commands. Actual rem… |
| 1.3.6.1.4.1.33.6.1.10.1.4 | ColumnnamedName | read-only | mandatory | A name that may be used to identify the client. Corresponds directly to the value labeled 'Name' in the MANAGER NODE display. |
| 1.3.6.1.4.1.33.6.1.10.1.5 | ColumnnamedLoadFile | read-only | mandatory | The file with the client's load image. Corresponds directly to the value labeled 'Load File' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays. |
| 1.3.6.1.4.1.33.6.1.10.1.6 | ColumnnamedDiagnosticFile | read-only | mandatory | The file with the client's diagnostic test image. Corresponds directly to the value labeled 'Diag File' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE … |
| 1.3.6.1.4.1.33.6.1.10.1.7 | ColumnnamedLoadService | read-only | mandatory | Control for allowing load service for the client. Corresponds directly to the value labeled 'Load' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displ… |
| 1.3.6.1.4.1.33.6.1.10.1.8 | ColumnnamedDumpService | read-only | mandatory | Control for allowing dump service for the client. Corresponds directly to the value labeled 'Dump' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displ… |
| 1.3.6.1.4.1.33.6.1.11 | TablexEventTable | not-accessible | mandatory | A list of event entries. The number of entries is given by basicEventNumber. |
| 1.3.6.1.4.1.33.6.1.11.1 | RowxEventEntry | not-accessible | mandatory | Parameter values for a event entry. |
| 1.3.6.1.4.1.33.6.1.11.1.1 | ColumnxEventIndex | read-only | mandatory | In identification number for an event. The value 1 indicates the oldest event in the file, with subsequent numbers indicating sequential events. The event text… |
| 1.3.6.1.4.1.33.6.1.11.1.2 | ColumnxEventText | read-only | mandatory | The text of the event, including date, time and other information. Corresponds directly to the individual event text in the MANAGER EVENTS display. |
| 1.3.6.1.4.1.33.6.1.12 | ScalarbasicDeviceNumber | read-only | mandatory | The system's number of mass-storage devices. |
| 1.3.6.1.4.1.33.6.1.13 | TabledeviceTable | not-accessible | mandatory | A list of device entries. The number of entries is given by basicDeviceNumber. |
| 1.3.6.1.4.1.33.6.1.13.1 | RowdeviceEntry | not-accessible | mandatory | Parameter values for a device entry. |
| 1.3.6.1.4.1.33.6.1.13.1.1 | ColumndeviceIndex | read-only | mandatory | In identification number for a device, in the range 1 to basicDeviceNumber |
| 1.3.6.1.4.1.33.6.1.13.1.2 | ColumndeviceName | read-only | mandatory | A name by which the device is known in other displays, such as 'C1' or 'D2'. |
| 1.3.6.1.4.1.33.6.1.13.1.3 | ColumndeviceDescr | read-only | mandatory | Details of the device type, including, for example, size, manufacturer, Flash versus RAM, and such. Corresponds directly to the value labeled 'Device Type: in … |
| 1.3.6.1.4.1.33.6.1.13.1.4 | ColumndeviceOperation | read-only | mandatory | Current operational state of the device. Corresponds directly the value labeled 'Device Operation:' in the MANAGER DEVICE STATUS display. |
| 1.3.6.1.4.1.33.6.1.13.1.5 | ColumndeviceFormat | read-only | mandatory | Formatting status of the device. Corresponds directly the presence of one of the value labels under the label 'Device Status:' in the MANAGER DEVICE STATUS dis… |
| 1.3.6.1.4.1.33.6.1.13.1.6 | ColumndeviceProtection | read-only | mandatory | Write-protect status of the device. Corresponds directly the presence of one of the value labels under the label 'Device Status:' in the MANAGER DEVICE STATUS … |
| 1.3.6.1.4.1.33.6.1.13.1.7 | ColumndeviceFormatMedium | read-write | mandatory | Control to cause formatting of the medium in the device. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Set… |
| 1.3.6.1.4.1.33.6.1.13.1.8 | ColumndeviceGetFile | read-write | mandatory | Control to cause getting a file to the device from a remote host system. In response to a get-request or get-next-request, the agent always returns 'ready' for… |
| 1.3.6.1.4.1.33.6.1.13.1.9 | ColumndeviceGetFileHostIdentificationType | read-write | mandatory | The type of identification value in deviceIdentification. Corresponds indirectly to ADDRESS in the GET DEVICE command. This object may not be set outside the c… |
| 1.3.6.1.4.1.33.6.1.13.1.10 | ColumndeviceGetFileHostIdentification | read-write | mandatory | Identification of the host to get the file from, with type depending on deviceIdentificationType. Corresponds directly to ADDRESS in the GET DEVICE command. Th… |
| 1.3.6.1.4.1.33.6.1.13.1.11 | ColumndeviceGetFileName | read-write | mandatory | The name of the file to get. Corresponds directly to LOAD FILE in the GET DEVICE command. This object may not be set outside the context of setting deviceGetFi… |
| 1.3.6.1.4.1.33.6.1.13.1.12 | ColumndeviceGetFileArea | read-write | mandatory | The area number in which to put the file. Corresponds directly to AREA in the GET DEVICE command. If it is not relevant to the particular device, it is ignored… |
| 1.3.6.1.4.1.33.6.1.13.1.13 | ColumndeviceFormatOption | read-write | mandatory | Formatting option to apply. Corresponds directly to the OPTION in the FORMAT DEVICE command. This object may not be set outside the context of setting deviceFo… |
| 1.3.6.1.4.1.33.6.1.13.1.14 | ColumndeviceFormatRedundantParams | read-write | mandatory | Control for creating redundant parameter storage areas when formatting. Corresponds directly to NONREDUNDANT in the FORMAT DEVICE command. This object may not … |
| 1.3.6.1.4.1.33.6.1.13.1.15 | ColumndevicePreviousStatus | read-only | mandatory | Result of the immediately previous concluded boot dialog. Corresponds directly to the value labeled 'Get File Previous Status:' in the SHOW CARD STATUS display. |
| 1.3.6.1.4.1.33.6.2 | NodexDump | |||
| 1.3.6.1.4.1.33.6.2.1 | ScalardumpService | read-write | mandatory | Control for allowing dump service for any client. Corresponds directly to DUMP and the value labeled 'Dump:' in the MANAGER CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.6.2.2 | ScalardumpDrive | read-write | mandatory | Identification number of the disk drive where dumps are stored. Corresponds directly to DUMP DRIVE and the value labeled 'Dump Drive:' in the MANAGER CHARACTER… |
| 1.3.6.1.4.1.33.6.2.3 | ScalardumpMerit | read-write | mandatory | Relative preference for this dump server over others. Corresponds directly to DUMP MERIT and the value labeled 'Dump Merit:' in the MANAGER CHARACTERISTICS dis… |
| 1.3.6.1.4.1.33.6.2.4 | ScalardumpSize | read-write | mandatory | Type of dump file to keep. Corresponds directly to DUMP SIZE and the value labeled 'Dump Size:' in the MANAGER CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.6.2.5 | ScalardumpCompleted | read-only | mandatory | The number of dumps completed since system initialization. Corresponds directly to the value labeled 'Dump Operations Completed:' in the MANAGER STATUS display. |
| 1.3.6.1.4.1.33.6.2.6 | ScalardumpActive | read-only | mandatory | The number of dumps in progress. Corresponds directly to the value labeled 'Currently Dumping:' in the MANAGER STATUS display. |
| 1.3.6.1.4.1.33.6.2.7 | ScalardumpFileNumber | read-only | mandatory | The number of dump files currently stored. Corresponds directly to the value labeled 'Network dump files' and 'files' in the MANAGER FILES display. |
| 1.3.6.1.4.1.33.6.2.8 | TabledumpFileTable | not-accessible | mandatory | A list of dump file entries. The number of entries is given by dumpFileNumber. |
| 1.3.6.1.4.1.33.6.2.8.1 | RowdumpFileEntry | not-accessible | mandatory | Parameter values for a dump file entry. |
| 1.3.6.1.4.1.33.6.2.8.1.1 | ColumndumpFileIdentificationType | read-only | mandatory | The type of identification value in dumpFileIdentification. Corresponds indirectly to a file name part in the section labeled 'Network dump files' in the MANAG… |
| 1.3.6.1.4.1.33.6.2.8.1.2 | ColumndumpFileIdentification | read-only | mandatory | Identification of the dump file, an Ethernet address, as indicated by dumpFileIdentificationType. Corresponds indirectly to a file name part in the section lab… |
| 1.3.6.1.4.1.33.6.2.8.1.3 | ColumndumpFileEntryStatus | read-write | mandatory | The status of the entry. Set to 'invalid' to remove the entry, which corresponds indirectly to the PURGE MANAGER DUMP FILES command. Actual removal of the entr… |
| 1.3.6.1.4.1.33.6.2.8.1.4 | ColumndumpFileCreation | read-only | mandatory | The time the dump file was created. Corresponds directly to a date and time in the section labeled 'Network dump files' in the MANAGER FILES display. |
| 1.3.6.1.4.1.33.6.2.8.1.5 | ColumndumpFileSize | read-only | mandatory | The number of bytes stored in the dump file. Corresponds directly to the value labeled 'bytes' in the section labeled 'Network dump files' in the MANAGER FILES… |
| 1.3.6.1.4.1.33.6.3 | NodexLoad | |||
| 1.3.6.1.4.1.33.6.3.1 | ScalarloadService | read-write | mandatory | Control for allowing load service for any client. Corresponds directly to LOAD and the value labeled 'Load:' in the MANAGER CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.6.3.2 | ScalarloadMerit | read-write | mandatory | Relative preference for this load server over others. Corresponds directly to LOAD MERIT and the value labeled 'Load Merit:' in the MANAGER CHARACTERISTICS dis… |
| 1.3.6.1.4.1.33.6.3.3 | ScalarloadCompleted | read-only | mandatory | The number of loads completed since system initialization. Corresponds directly to the value labeled 'Load Operations Completed:' in the MANAGER STATUS display. |
| 1.3.6.1.4.1.33.6.3.4 | ScalarloadActive | read-only | mandatory | The number of loads in progress. Corresponds directly to the value labeled 'Currently Loading:' in the MANAGER STATUS display. |
| 1.3.6.1.4.1.33.6.3.5 | ScalarloadFileNumber | read-only | mandatory | The number of load files currently stored. Corresponds directly to the value labeled 'Load image files' and 'files' in the MANAGER FILES display. |
| 1.3.6.1.4.1.33.6.3.6 | TableloadFileTable | not-accessible | mandatory | A list of load file entries. The number of entries is given by loadFileNumber. |
| 1.3.6.1.4.1.33.6.3.6.1 | RowloadFileEntry | not-accessible | mandatory | Parameter values for a load file entry. |
| 1.3.6.1.4.1.33.6.3.6.1.1 | ColumnloadFileName | read-only | mandatory | The name of a load file. Corresponds directly to a file name part in the section labeled 'Load image files' in the MANAGER FILES display. |
| 1.3.6.1.4.1.33.6.3.6.1.2 | ColumnloadFileCreation | read-only | mandatory | The time the load file was created. Corresponds directly to a date and time in the section labeled 'Load image files' in the MANAGER FILES display. |
| 1.3.6.1.4.1.33.6.3.6.1.3 | ColumnloadFileSize | read-only | mandatory | The number of bytes stored in the load file. Corresponds directly to the value labeled 'bytes' in the section labeled 'Load image files' in the MANAGER FILES d… |
| 1.3.6.1.4.1.33.6.3.6.1.4 | ColumnloadFileSoftwareVersionType | read-only | mandatory | The software version type of the image in the load file. Corresponds directly to a software version in the section labeled 'Load image files' in the MANAGER FI… |
| 1.3.6.1.4.1.33.6.3.6.1.5 | ColumnloadFileSoftwareVersion | read-only | mandatory | The software version of the image in the load file. Corresponds directly to a software version in the section labeled 'Load image files' in the MANAGER FILES d… |
| 1.3.6.1.4.1.33.6.4 | NodexParam | |||
| 1.3.6.1.4.1.33.6.4.1 | ScalarparamService | read-write | mandatory | Control for allowing parameter storage service for any client. Corresponds directly to PARAMETER SERVICE and the value labeled 'Parameter Service:' in the MANA… |
| 1.3.6.1.4.1.33.6.4.2 | ScalarparamDefaultService | read-write | mandatory | Control for allowing default parameter loading service for any client. Corresponds directly to PARAMETER DEFAULT SERVICE and the value labeled 'Parameter Defau… |
| 1.3.6.1.4.1.33.6.4.3 | ScalarparamDrive | read-write | mandatory | Identification number of the disk drive where parameters are stored. Corresponds directly to PARAMETER DRIVE and the value labeled 'Parameter Drive:' in the MA… |
| 1.3.6.1.4.1.33.6.4.4 | ScalarparamActive | read-only | mandatory | The number of params in progress. Corresponds directly to the value labeled 'Currently Paraming:' in the MANAGER STATUS display. |
| 1.3.6.1.4.1.33.6.4.5 | ScalarparamStorageActive | read-only | mandatory | The number of parameter storage operations in progress. Corresponds directly to the value labeled 'Currently saving parameters:' in the MANAGER STATUS display. |
| 1.3.6.1.4.1.33.6.4.6 | ScalarparamFileNumber | read-only | mandatory | The number of parameter files currently stored. Corresponds directly to the value labeled 'Parameter files' and 'files' in the MANAGER FILES display. |
| 1.3.6.1.4.1.33.6.4.7 | TableparamFileTable | not-accessible | mandatory | A list of param file entries. The number of entries is given by paramFileNumber. |
| 1.3.6.1.4.1.33.6.4.7.1 | RowparamFileEntry | not-accessible | mandatory | Parameter values for a param file entry. |
| 1.3.6.1.4.1.33.6.4.7.1.1 | ColumnparamFileIdentificationType | read-only | mandatory | The type of identification value in paramFileIdentification. Corresponds indirectly to a file name part in the section labeled 'Parameter files' in the MANAGER… |
| 1.3.6.1.4.1.33.6.4.7.1.2 | ColumnparamFileIdentification | read-only | mandatory | Identification of the param file, an Ethernet address, as indicated by paramFileIdentificationType. Corresponds indirectly to a file name part in the section l… |
| 1.3.6.1.4.1.33.6.4.7.1.3 | ColumnparamFileEntryStatus | read-write | mandatory | The status of the entry. Set to 'invalid' to remove the entry, which corresponds indirectly to the PURGE MANAGER PARAMETER FILES command. Actual removal of the… |
| 1.3.6.1.4.1.33.6.4.7.1.4 | ColumnparamFileWrite | read-only | mandatory | The time the parameter file was last written. Corresponds directly to a date and time in the section labeled 'Parameter files' in the MANAGER FILES display. |
| 1.3.6.1.4.1.33.6.4.7.1.5 | ColumnparamFileSize | read-only | mandatory | The number of bytes stored in the param file. Corresponds directly to the value labeled 'bytes' in the section labeled 'Parameter files' in the MANAGER FILES d… |
| 1.3.6.1.4.1.33.6.4.7.1.6 | ColumnparamFileParameterVersion | read-only | mandatory | The version number of the parameter data in the file. Corresponds directly to the value labeled 'ver' in the section labeled 'Parameter files' in the MANAGER F… |
| 1.3.6.1.4.1.33.7 | NodexParamClient | |||
| 1.3.6.1.4.1.33.7.1 | ScalarparamClientLoaderName | read-only | mandatory | The name of the system that most recently provided this system's stored parameters. Corresponds directly to the name value labeled 'Loaded From:' in the PARAME… |
| 1.3.6.1.4.1.33.7.2 | ScalarparamClientLoaderAddressType | read-only | mandatory | The type of network address contained in paramClientLoaderAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'loc… |
| 1.3.6.1.4.1.33.7.3 | ScalarparamClientLoaderAddress | read-only | mandatory | The network address of the system that most recently provided this system's stored parameters. Corresponds directly to the address value labeled 'Loaded From:'… |
| 1.3.6.1.4.1.33.7.4 | ScalarparamClientParameterVersion | read-write | mandatory | The version number of the parameters as stored in this system's local memory. Corresponds directly to SERVER PARAMETER VERSION and the value labeled 'Last Upda… |
| 1.3.6.1.4.1.33.7.5 | ScalarparamClientUpdateTime | read-only | mandatory | This system's local date and time when it last attempted to store parameters with a parameter server. Corresponds directly to the values labeled 'Last Update D… |
| 1.3.6.1.4.1.33.7.6 | ScalarparamClientServerCheck | read-write | mandatory | Control over whether or not this system is allowed to check for additional parameter servers. 'enabled' allows checking. Corresponds directly to PARAMETER SERV… |
| 1.3.6.1.4.1.33.7.7 | ScalarparamClientCheckInterval | read-write | mandatory | The number of minutes between checks for additional parameter servers. Corresponds directly to PARAMETER SERVER CHECK TIMER and the value labeled 'Check Timer:… |
| 1.3.6.1.4.1.33.7.8 | ScalarparamClientCheckNow | read-write | mandatory | Control to cause this system to immediately check for additional parameter servers. The agent always returns 'ready' for this value. Setting the value to 'read… |
| 1.3.6.1.4.1.33.7.9 | ScalarparamClientServerLimit | read-write | mandatory | The maximum number of parameter servers this system is allowed to remember at the same time. Corresponds directly to PARAMETER SERVER LIMIT and the value label… |
| 1.3.6.1.4.1.33.7.10 | ScalarparamClientRetransmitInterval | read-write | mandatory | The number of minutes between this system's attempts to store new parameters with a server that has not acknowledged previous attempts. Corresponds directly to… |
| 1.3.6.1.4.1.33.7.11 | ScalarparamClientRetransmitLimit | read-write | mandatory | The maximum number of attempts by this system to store new parameters with a server that has not acknowledged previous attempts. Corresponds directly to PARAME… |
| 1.3.6.1.4.1.33.7.12 | ScalarparamClientState | read-only | mandatory | This system's state with regard to update attempts. The value meanings are: other none of the following idle no update in progress internal internal state of n… |
| 1.3.6.1.4.1.33.7.13 | ScalarparamClientProtocolErrors | read-only | mandatory | The number of invalid parameter service protocol messages received by this system. Corresponds directly to the value labeled 'Bad Parameter Messages:' in the P… |
| 1.3.6.1.4.1.33.7.14 | ScalarparamClientServerRejects | read-only | mandatory | The number of parameter servers this system rejected due to exceeding paramClientServerLimit. Corresponds directly to the value labeled 'Rejected Servers:' in … |
| 1.3.6.1.4.1.33.7.15 | ScalarparamClientServerNumber | read-only | mandatory | The number of parameter servers known to this system, indicating the number of entries in serverTable. Corresponds directly to the value labeled 'Parameter Ser… |
| 1.3.6.1.4.1.33.7.16 | TableparamServerTable | not-accessible | mandatory | A list of parameter server entries. The number of entries is given by the value of paramClientServerNumber. |
| 1.3.6.1.4.1.33.7.16.1 | RowparamServerEntry | not-accessible | mandatory | Status and parameter values for a parameter server. |
| 1.3.6.1.4.1.33.7.16.1.1 | ColumnparamServerName | read-only | mandatory | The server's name, unique within this system. Always 16 characters, null padded on the end. Corresponds directly to the name used to create the entry and the v… |
| 1.3.6.1.4.1.33.7.16.1.2 | ColumnparamServerEntryStatus | read-write | mandatory | The status of the entry. Set to 'invalid' to remove the entry, which corresponds directly to the CLEAR/PURGE PARAMETER SERVER command. Actual removal of the en… |
| 1.3.6.1.4.1.33.7.16.1.3 | ColumnparamServerAddressType | read-write | mandatory | The type of network address contained in paramServerAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'local' me… |
| 1.3.6.1.4.1.33.7.16.1.4 | ColumnparamServerAddress | read-write | mandatory | The server's network address. Corresponds directly to the value labeled 'Address' in the PARAMETER SERVER display. |
| 1.3.6.1.4.1.33.7.16.1.5 | ColumnparamServerStoredVersion | read-only | mandatory | Parameter version number currently stored at the server. Corresponds directly to the value labeled 'Version' in the PARAMETER SERVER display. |
| 1.3.6.1.4.1.33.7.16.1.6 | ColumnparamServerStoredTime | read-only | mandatory | The server's date and time when it stored the parameters of version paramServerStoredVersion. Corresponds directly to the value labeled 'Date' in the PARAMETER… |
| 1.3.6.1.4.1.33.7.16.1.7 | ColumnparamServerStoredStatus | read-only | mandatory | Status of this system's parameters with respect to the server. Corresponds directly to the value labeled 'Status' in the PARAMETER SERVER display. The value me… |
| 1.3.6.1.4.1.33.7.16.1.8 | ColumnparamServerStoredFailure | read-only | mandatory | When paramServerStoredStatus is 'failed' or 'failing', the reason for the most recent failure. Corresponds directly to the value labeled 'Reason' in the PARAME… |
| 1.3.6.1.4.1.33.7.17 | ScalarparamClientPath | read-write | mandatory | The directory path to the parameter file on all servers. Corresponds directly to PARAMETER SERVER PATH and the value labeled 'Path:' in the PARAMETER SERVER di… |
| 1.3.6.1.4.1.33.7.18 | ScalarparamClientChassisStorageState | read-only | mandatory | The status of the current attempt to update parameters in local chassis storage. Corresponds directly to the value labeled 'Chassis Configuration:'. |
| 1.3.6.1.4.1.33.7.20 | ScalarparamClientTftpBroadcast | read-write | mandatory | Control over whether or not this system is allowed to send out a TFTP read broadcast after sending a BOOTP broadcast during the Parameter Check Function. 'enab… |
| 1.3.6.1.4.1.33.7.21 | ScalarparamClientWriteNow | read-write | mandatory | Control to start saving parameters immediately in response to an execute. Corresponds directly to the WRITE PARAMETERS command. In response to a get-request or… |
| 1.3.6.1.4.1.33.8 | Nodeagent | |||
| 1.3.6.1.4.1.33.8.1 | NodeterminalServer | |||
| 1.3.6.1.4.1.33.8.1.1 | NodetsMxCard1M | |||
| 1.3.6.1.4.1.33.8.1.2 | NodetsMxBox1M | |||
| 1.3.6.1.4.1.33.8.1.3 | NodetsMxCard | |||
| 1.3.6.1.4.1.33.8.1.4 | NodetsMxBox | |||
| 1.3.6.1.4.1.33.8.1.5 | NodetsN9 | |||
| 1.3.6.1.4.1.33.8.1.6 | NodetsPrint | |||
| 1.3.6.1.4.1.33.8.1.7 | NodetsX25 | |||
| 1.3.6.1.4.1.33.8.1.29 | Nodeem1608 | |||
| 1.3.6.1.4.1.33.8.1.30 | Nodeir7520 | |||
| 1.3.6.1.4.1.33.8.1.31 | Nodeir9020 | |||
| 1.3.6.1.4.1.33.8.1.32 | Nodeir7020 | |||
| 1.3.6.1.4.1.33.8.1.124 | NodeirMgr0Rdc | |||
| 1.3.6.1.4.1.33.8.1.125 | Nodeir9040 | |||
| 1.3.6.1.4.1.33.8.1.126 | Nodeir7040 | |||
| 1.3.6.1.4.1.33.8.1.127 | NodeirMgr0 | |||
| 1.3.6.1.4.1.33.8.1.128 | NodeirM800 | |||
| 1.3.6.1.4.1.33.8.1.129 | NodeirM700 | |||
| 1.3.6.1.4.1.33.8.1.130 | Nodeir8020 | |||
| 1.3.6.1.4.1.33.8.1.131 | Nodeir8040 | |||
| 1.3.6.1.4.1.33.8.1.132 | Nodeir7004 | |||
| 1.3.6.1.4.1.33.8.1.133 | Nodeir7008 | |||
| 1.3.6.1.4.1.33.8.1.134 | Nodeir8004 | |||
| 1.3.6.1.4.1.33.8.1.135 | Nodeir8008 | |||
| 1.3.6.1.4.1.33.8.1.136 | NodeirM900 | |||
| 1.3.6.1.4.1.33.8.1.137 | NodeirMGR0AC | |||
| 1.3.6.1.4.1.33.8.1.138 | NodeirMGR0AC-IN | |||
| 1.3.6.1.4.1.33.8.1.139 | Nodeir9004 | |||
| 1.3.6.1.4.1.33.8.1.140 | Nodeir9008 | |||
| 1.3.6.1.4.1.33.8.3 | Nodebridge | |||
| 1.3.6.1.4.1.33.8.4 | Noderepeater | |||
| 1.3.6.1.4.1.33.8.4.1 | NoderpMx | |||
| 1.3.6.1.4.1.33.8.4.2 | NoderpN9 | |||
| 1.3.6.1.4.1.33.8.5 | NodebridgeRouter | |||
| 1.3.6.1.4.1.33.8.5.1 | NodebridgeRouterMx | |||
| 1.3.6.1.4.1.33.8.5.2 | NodebridgeRouterN9 | |||
| 1.3.6.1.4.1.33.8.5.3 | NodebridgeRouterN3 | |||
| 1.3.6.1.4.1.33.8.5.4 | NodebridgeRouterN2 | |||
| 1.3.6.1.4.1.33.8.5.5 | NodebridgeRouterEB | |||
| 1.3.6.1.4.1.33.8.7 | NodebridgeRouterRepeater | |||
| 1.3.6.1.4.1.33.8.8 | Nodeswitch | |||
| 1.3.6.1.4.1.33.8.9 | Nodeoem | |||
| 1.3.6.1.4.1.33.8.9.1 | NodenetVantage | |||
| 1.3.6.1.4.1.33.8.9.1.1 | Nodenv8516TT | |||
| 1.3.6.1.4.1.33.8.9.1.2 | Nodenv8516FF | |||
| 1.3.6.1.4.1.33.8.10 | Nodenbase | |||
| 1.3.6.1.4.1.33.8.10.1 | NodenbaseSwitch | |||
| 1.3.6.1.4.1.33.8.10.1.1 | NodenbaseSwitchN9 | |||
| 1.3.6.1.4.1.33.9 | NodehubDeprecated | |||
| 1.3.6.1.4.1.33.9 | NoderesourceFailure | Indication that a system resource lack occurred of the type resType. | ||
| 1.3.6.1.4.1.33.10 | NodexInternet | |||
| 1.3.6.1.4.1.33.10.1 | NodexIp | |||
| 1.3.6.1.4.1.33.10.1.1 | ScalaripGatewayAddress1 | read-write | mandatory | The internet address of the system's primary (first choice) gateway. A value of 0.0.0.0 indicates no address. Corresponds directly to SERVER INTERNET PRIMARY G… |
| 1.3.6.1.4.1.33.10.1.2 | ScalaripGatewayAddress2 | read-write | mandatory | The internet address of the system's secondary (second choice) gateway. A value of 0.0.0.0 indicates no address. Corresponds directly to SERVER INTERNET SECOND… |
| 1.3.6.1.4.1.33.10.1.3 | ScalaripAutoSubnetMask | read-write | deprecated | A control for automatic determination of subnet mask. 'disabled' indicates the system must use the mask as configured by the network manager. 'enabled' indicat… |
| 1.3.6.1.4.1.33.10.1.4 | ScalaripReassembly | read-write | mandatory | A control for reassembly of IP fragments. Corresponds directly to SERVER INTERNET REASSEMBLY and the value labeled 'Reassembly:' in the SERVER INTERNET CHARACT… |
| 1.3.6.1.4.1.33.10.1.5 | ScalaripFragmentsQueuedHigh | read-only | mandatory | Highest number of IP fragments queued. |
| 1.3.6.1.4.1.33.10.1.6 | ScalaripFragmentsQueuedCurrent | read-only | mandatory | Current number of IP fragments queued. |
| 1.3.6.1.4.1.33.10.1.7 | TableipGenAdExtTable | not-accessible | mandatory | Table of additional fields indexed by local IP address. An entry in this table is created or deleted when an entry in the MIB-II ipAddrTable is created or dele… |
| 1.3.6.1.4.1.33.10.1.7.1 | RowipGenAdExtEntry | not-accessible | mandatory | A particular entry. |
| 1.3.6.1.4.1.33.10.1.7.1.1 | ColumnipGenAdEntExtType | read-write | mandatory | The way this local IP address is used, which may imply alternate, more intuitive ways to set it. primary general purpose for ordinary use rotary identificaton … |
| 1.3.6.1.4.1.33.10.1.7.1.2 | ColumnipGenAdEntExtBroadcast | read-write | mandatory | Outgoing IP broadcast address associated with this local address. Value may be confined to logical compatibility with associated network mask. |
| 1.3.6.1.4.1.33.10.1.8 | ScalaripARPTimeout | read-write | mandatory | A control to set the length of time in minutes before an unused ARP entry is purged from the ARP table. The default is 60 minutes. Corresponds directly to the … |
| 1.3.6.1.4.1.33.10.1.9 | ScalaripGatewayPingInterval | read-write | mandatory | A control to set the interval of time in seconds between successive pings to the primary gateway so as to determine its status. The default is 60 seconds. Corr… |
| 1.3.6.1.4.1.33.10.1.11 | ScalaripConfigureBootp | read-write | mandatory | Control to use the BOOTP protocol upon startup to learn the unit's own internet address, subnet mask, primary and secondary gateway servers, domain name server… |
| 1.3.6.1.4.1.33.10.2 | NodexTcp | |||
| 1.3.6.1.4.1.33.10.2.1 | TabletcpPortTable | not-accessible | mandatory | A list of TCP character port entries. |
| 1.3.6.1.4.1.33.10.2.1.1 | RowtcpPortEntry | not-accessible | mandatory | TCP parameter values for a character port. |
| 1.3.6.1.4.1.33.10.2.1.1.1 | ColumntcpPortIndex | read-only | mandatory | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the … |
| 1.3.6.1.4.1.33.10.2.1.1.2 | ColumntcpPortConnectByAddress | read-write | mandatory | A control for requesting outgoing connection by internet address. 'disabled' indicates outgoing connections must be by Domain name. 'enabled' indicates that ou… |
| 1.3.6.1.4.1.33.10.2.1.1.3 | ColumntcpPortWindowSize | read-write | mandatory | Size of the TCP window for TCP connections on the port. Corresponds directly to PORT INTERNET TCP WINDOW SIZE and the value labeled 'TCP Window Size:' in the P… |
| 1.3.6.1.4.1.33.10.2.1.1.4 | ColumntcpPortKeepAliveLimit | read-write | mandatory | Number of minutes to maintain a TCP connection without response to keep-alive communication. A value of zero indicates no limit. |
| 1.3.6.1.4.1.33.10.2.2 | ScalartcpResequencing | read-write | mandatory | A control for keeping TCP messages received out-of-order to resequence them before using them. Corresponds directly to SERVER INTERNET TCP RESEQUENCING and the… |
| 1.3.6.1.4.1.33.10.2.3 | ScalartcpQueuedSegs | read-only | mandatory | Number of TCP segments in the TCP receive queues. Corresponds directly to the value labeled 'TCP Packets Queued:' in the SERVER INTERNET COUNTERS display. |
| 1.3.6.1.4.1.33.10.2.4 | ScalartcpDiscardSegs | read-only | mandatory | Number of TCP segments discarded due to exceeding the TCP receive queue limit. Corresponds directly to the value labeled 'TCP Packets Discarded:' in the SERVER… |
| 1.3.6.1.4.1.33.10.2.5 | ScalartcpConnectTimer | read-write | mandatory | Number of seconds to attempt a TCP connection without a response from the other side. The default value is 32 seconds. Corresponds directly to the SERVER INTER… |
| 1.3.6.1.4.1.33.10.2.6 | ScalartcpLocalPortBase | read-write | mandatory | The value for port 0's tcp source port number. |
| 1.3.6.1.4.1.33.10.2.7 | ScalartcpLocalPortIncrement | read-write | mandatory | The value by which the tcp source port number increases for each port greater than port 0. |
| 1.3.6.1.4.1.33.10.2.8 | ScalartcpRoutingTblSz | read-write | mandatory | A control to set the size of the working routing table. The default is the current size of the table (64). |
| 1.3.6.1.4.1.33.10.2.9 | ScalartcpDataSendDelay | read-write | mandatory | A control to delay for the specified number of 10 millisecond ticks before sending the userdata string over the telnet connection. |
| 1.3.6.1.4.1.33.10.2.10 | ScalartcpAckDelay | read-write | mandatory | A Control to prevent sending a TCP ACK when we we change TCP window size. |
| 1.3.6.1.4.1.33.10.2.11 | ScalartcpRetransmitMin | read-write | mandatory | Number of milliseconds for the initial TCP Retransmit timer. This is the time at which a TCP session will initially retransmit unacknowledged packets. |
| 1.3.6.1.4.1.33.10.3 | NodexSnmpAgent | |||
| 1.3.6.1.4.1.33.10.3.1 | ScalarsnmpAgentGetCommunity | read-write | mandatory | The SNMP community name allowed to perform get-requests or get-next requests to this agent. Use of this value is case-insensitive. If the size is 0, the agent … |
| 1.3.6.1.4.1.33.10.3.2 | ScalarsnmpAgentSetCommunity | read-write | mandatory | The SNMP community name allowed to perform set-requests to this agent. Use of this value is case-insensitive. If the size is 0, the agent does not check the co… |
| 1.3.6.1.4.1.33.10.3.3 | ScalarsnmpAgentTrapCommunity | read-write | mandatory | The SNMP community name sent in traps from this agent. Use of this value preserves case. Corresponds directly to SERVER INTERNET SNMP TRAP COMMUNITY and the va… |
| 1.3.6.1.4.1.33.10.3.4 | ScalarsnmpAgentGetClientNumber | read-only | mandatory | The number of client source addresses allowed to perform get-requests or get-next requests to this agent. If the value is 0, the agent does not check source ad… |
| 1.3.6.1.4.1.33.10.3.5 | ScalarsnmpAgentSetClientNumber | read-only | mandatory | The number of client source addresses allowed to perform set-requests to this agent. If the value is 0, the agent does not check source address for these opera… |
| 1.3.6.1.4.1.33.10.3.6 | ScalarsnmpAgentTrapClientNumber | read-only | mandatory | The number of client source addresses to which this agent sends traps. If the value is 0, the agent does not perform this operation. Corresponds indirectly to … |
| 1.3.6.1.4.1.33.10.3.7 | TablegetClientTable | not-accessible | mandatory | A list of get client entries. The number of entries is given by the value of snmpAgentGetClientNumber. |
| 1.3.6.1.4.1.33.10.3.7.1 | RowgetClientEntry | not-accessible | mandatory | Parameter values for a get client. |
| 1.3.6.1.4.1.33.10.3.7.1.1 | ColumngetClientIndex | read-only | mandatory | Identification of a get client entry. Corresponds directly to the number in the label 'Get Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.10.3.7.1.2 | ColumngetClientEntryStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalida… |
| 1.3.6.1.4.1.33.10.3.7.1.3 | ColumngetClientAddressType | read-write | mandatory | The type of network address contained in getClientAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'ip' is an I… |
| 1.3.6.1.4.1.33.10.3.7.1.4 | ColumngetClientAddress | read-write | mandatory | The client's network address. If getClientAddressType does not accompany getClientAddress in a set request, the default type is 'ip'. Corresponds directly to t… |
| 1.3.6.1.4.1.33.10.3.8 | TablesetClientTable | not-accessible | mandatory | A list of set client entries. The number of entries is given by the value of snmpAgentSetClientNumber. |
| 1.3.6.1.4.1.33.10.3.8.1 | RowsetClientEntry | not-accessible | mandatory | Parameter values for a set client. |
| 1.3.6.1.4.1.33.10.3.8.1.1 | ColumnsetClientIndex | read-only | mandatory | Identification of a set client entry. Corresponds directly to the number in the label 'Set Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.10.3.8.1.2 | ColumnsetClientEntryStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalida… |
| 1.3.6.1.4.1.33.10.3.8.1.3 | ColumnsetClientAddressType | read-write | mandatory | The type of network address contained in setClientAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'ip' is an I… |
| 1.3.6.1.4.1.33.10.3.8.1.4 | ColumnsetClientAddress | read-write | mandatory | The client's network address. When setting this value, the requester must supply setClientAddressType. If setClientAddressType does not accompany setClientAddr… |
| 1.3.6.1.4.1.33.10.3.9 | TabletrapClientTable | not-accessible | mandatory | A list of trap client entries. The number of entries is given by the value of snmpAgentTrapClientNumber. |
| 1.3.6.1.4.1.33.10.3.9.1 | RowtrapClientEntry | not-accessible | mandatory | Parameter values for a trap client. |
| 1.3.6.1.4.1.33.10.3.9.1.1 | ColumntrapClientIndex | read-only | mandatory | Identification of a trap client entry. Corresponds directly to the number in the label 'Trap Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.10.3.9.1.2 | ColumntrapClientEntryStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalida… |
| 1.3.6.1.4.1.33.10.3.9.1.3 | ColumntrapClientAddressType | read-write | mandatory | The type of network address contained in trapClientAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'ip' is an … |
| 1.3.6.1.4.1.33.10.3.9.1.4 | ColumntrapClientAddress | read-write | mandatory | The client's network address. When setting this value, the requester must supply trapClientAddressType. If trapClientAddressType does not accompany trapClientA… |
| 1.3.6.1.4.1.33.10.3.10 | ScalarsnmpAgentAuthFailureAddress | read-only | mandatory | The address of the client to most recently fail SNMP authorization. |
| 1.3.6.1.4.1.33.10.3.14 | ScalarsnmpAgentCommunityAuthenticationAlways | read-write | mandatory | When enabled, indicates that community string authentication is done always for Gets, Sets, and GetNexts. When disabled, community string authentication is don… |
| 1.3.6.1.4.1.33.10.4 | NodexDomainResolver | |||
| 1.3.6.1.4.1.33.10.4.1 | ScalardomainResolverSuffix | read-write | mandatory | A partial domain name for the server to append to the end of an incomplete domain name provided by the user. Corresponds directly to SERVER INTERNET DEFAULT DO… |
| 1.3.6.1.4.1.33.10.4.2 | ScalardomainResolverAddress1 | read-write | mandatory | The internet address of a Domain Name Server. The system can use one or two such addresses, without preference. A value of 0.0.0.0 indicates no address. Corres… |
| 1.3.6.1.4.1.33.10.4.3 | ScalardomainResolverAddress2 | read-write | mandatory | The internet address of a Domain Name Server. The system can use one or two such addresses, without preference. A value of 0.0.0.0 indicates no address. Corres… |
| 1.3.6.1.4.1.33.10.4.4 | ScalardomainResolverTtl | read-write | mandatory | The number of hours to keep received Domain information. Corresponds directly to SERVER INTERNET DOMAIN TTL and the value labeled ' Domain TTL:' in the SERVER … |
| 1.3.6.1.4.1.33.10.4.5 | ScalardomainResolverNameNumber | read-only | mandatory | The number of Domain name mappings in this system's name cache. |
| 1.3.6.1.4.1.33.10.4.6 | TablenameTable | not-accessible | mandatory | A list of Domain name entries. The number of entries is given by the value of domainResolverNameNumber. |
| 1.3.6.1.4.1.33.10.4.6.1 | RownameEntry | not-accessible | mandatory | Parameter values for a Domain name. |
| 1.3.6.1.4.1.33.10.4.6.1.1 | ColumnnameName | read-only | mandatory | A fully qualified domain name. Corresponds directly to the value labeled 'Domain Name' in the DOMAIN display. |
| 1.3.6.1.4.1.33.10.4.6.1.2 | ColumnnameAddress | read-only | mandatory | An Internet address corresponding to the Domain name. Corresponds directly to the value labeled 'Internet Address' in the DOMAIN display. |
| 1.3.6.1.4.1.33.10.4.6.1.3 | ColumnnameStatus | read-write | mandatory | The status of the entry. Set to 'invalid' to remove the entry, which corresponds directly to the PURGE DOMAIN command. Actual removal of the entry is implement… |
| 1.3.6.1.4.1.33.10.4.6.1.4 | ColumnnameSource | read-only | mandatory | Source of this entry. The value meanings are: local defined by manager (LOCAL) primary obtained from a primary name server secondary obtained from a secondary … |
| 1.3.6.1.4.1.33.10.4.6.1.5 | ColumnnameTtl | read-only | mandatory | The number of minutes remaining in the entry's time to live. Corresponds directly to the value labeled 'TTL' in the DOMAIN display. |
| 1.3.6.1.4.1.33.10.4.7 | NodedomainResolverPpp | |||
| 1.3.6.1.4.1.33.10.4.7.1 | ScalardomainResolverPppPrimaryServer | read-write | mandatory | The internet address of the primary Domain Name Server to use in PPP IPCP negotiations. A value of 0.0.0.0 indicates no address. Corresponds directly to the va… |
| 1.3.6.1.4.1.33.10.4.7.2 | ScalardomainResolverPppSecondaryServer | read-write | mandatory | The internet address of the secondary Domain Name Server to use in PPP IPCP negotiations. A value of 0.0.0.0 indicates no address. Corresponds directly to the … |
| 1.3.6.1.4.1.33.10.5 | NodexSlip | |||
| 1.3.6.1.4.1.33.10.5.1 | TableslipTable | not-accessible | mandatory | A list of SLIP character port entries. |
| 1.3.6.1.4.1.33.10.5.1.1 | RowslipEntry | not-accessible | mandatory | Parameter values for a SLIP port. |
| 1.3.6.1.4.1.33.10.5.1.1.1 | ColumnslipIndex | read-only | mandatory | An index value that uniquely identifies a port that can run SLIP. The port identified by a particular value of this index is the same port as identified by cha… |
| 1.3.6.1.4.1.33.10.5.1.1.2 | ColumnslipState | read-write | mandatory | A control indicating whether SLIP is in operation on the port. Corresponds directly to PORT INTERNET SLIP and the value labeled 'SLIP' in the PORT CHARACTERIST… |
| 1.3.6.1.4.1.33.10.5.1.1.3 | ColumnslipLocalAddress | read-write | mandatory | The IP address assigned to the port. Corresponds directly to PORT SLIP ADDRESS and the value labeled 'SLIP Address:' in the PORT ALTERNATE CHARACTERISTICS disp… |
| 1.3.6.1.4.1.33.10.5.1.1.4 | ColumnslipRemoteAddress | read-write | mandatory | The IP address of the remote system attached to the port. Corresponds directly to PORT SLIP REMOTE and the value labeled 'Remote SLIP Address:' in the PORT ALT… |
| 1.3.6.1.4.1.33.10.5.1.1.5 | ColumnslipMask | read-write | mandatory | The subnet mask to use for SLIP operation on the port. Corresponds directly to PORT SLIP MASK and the value labeled 'SLIP Mask:' in the PORT ALTERNATE CHARACTE… |
| 1.3.6.1.4.1.33.10.5.1.1.6 | ColumnslipPortPacketsReceived | read-only | mandatory | The number of SLIP packets received from the port. Corresponds directly to the value labeled 'Serial Packets Received:' in the PORT COUNTERS display. |
| 1.3.6.1.4.1.33.10.5.1.1.7 | ColumnslipPortPacketsSent | read-only | mandatory | The number of SLIP packets sent to the port. Corresponds directly to the value labeled 'Serial Packets Sent:' in the PORT COUNTERS display. |
| 1.3.6.1.4.1.33.10.5.1.1.8 | ColumnslipPortPacketsDiscarded | read-only | mandatory | The number of SLIP packets received from the port and discarded. Corresponds directly to the value labeled 'Serial Packets Discarded:' in the PORT COUNTERS dis… |
| 1.3.6.1.4.1.33.10.5.1.1.9 | ColumnslipPortPacketLengthErrors | read-only | mandatory | The number of SLIP packets received from the port with an incorrect number of bytes. Corresponds directly to the value labeled 'Serial Packet Length Errors:' i… |
| 1.3.6.1.4.1.33.10.5.1.1.10 | ColumnslipPortPacketChecksumErrors | read-only | mandatory | The number of SLIP packets received from the port with an invalid checksum. Corresponds directly to the value labeled 'Serial Packet Checksum Errors:' in the P… |
| 1.3.6.1.4.1.33.10.5.1.1.11 | ColumnslipNetworkPacketsReceived | read-only | mandatory | The number of SLIP packets received from the network for this port. Corresponds directly to the value labeled 'Network Packets Received:' in the PORT COUNTERS … |
| 1.3.6.1.4.1.33.10.5.1.1.12 | ColumnslipNetworkPacketsSent | read-only | mandatory | The number of SLIP packets sent to the network from this port. Corresponds directly to the value labeled 'Network Packets Sent:' in the PORT COUNTERS display. |
| 1.3.6.1.4.1.33.10.5.1.1.13 | ColumnslipNetworkPacketsDiscarded | read-only | mandatory | The number of SLIP packets received from the network for this port and discarded. Corresponds directly to the value labeled 'Network Packets Discarded:' in the… |
| 1.3.6.1.4.1.33.10.6 | NodexTelnet | |||
| 1.3.6.1.4.1.33.10.6.1 | TabletelnetPortTable | not-accessible | mandatory | A list of Telnet character port entries. |
| 1.3.6.1.4.1.33.10.6.1.1 | RowtelnetPortEntry | not-accessible | mandatory | Telnet parameter values for a character port. |
| 1.3.6.1.4.1.33.10.6.1.1.1 | ColumntelnetPortIndex | read-only | mandatory | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the … |
| 1.3.6.1.4.1.33.10.6.1.1.2 | ColumntelnetPortIncomingTcpPort | read-write | mandatory | The TCP port number offered for incoming connections to this character port. Corresponds directly to PORT TELNET REMOTE PORT and the value labeled 'Remote Port… |
| 1.3.6.1.4.1.33.10.6.1.1.3 | ColumntelnetPortOutgoingTcpPort | read-write | mandatory | The TCP port number used by default for outgoing connections from this character port. Corresponds directly to PORT TELNET DEFAULT PORT and the value labeled '… |
| 1.3.6.1.4.1.33.10.6.1.1.4 | ColumntelnetPortNewlineTranslation | read-write | mandatory | Translation to apply to newline sequences (CR/NULL or CR/LF) received from the network, before sending the newline to the character port. The value indicates t… |
| 1.3.6.1.4.1.33.10.6.1.1.5 | ColumntelnetPortTerminalType | read-write | mandatory | The terminal type character string for Telnet negotiations. Corresponds directly to PORT TELNET TERMINALTYPE and the value labeled 'TerminalType:' in the PORT … |
| 1.3.6.1.4.1.33.10.6.1.1.6 | ColumntelnetPortEorReflection | read-write | mandatory | Control for end-of-record handshake. Corresponds directly to PORT TELNET EOR REFLECTION and the value labeled 'EOR Reflection:' in the PORT TELNET CHARACTERIST… |
| 1.3.6.1.4.1.33.10.6.1.1.7 | ColumntelnetPortBinaryMode | read-write | mandatory | Control for operation of Telnet binary mode. The value meanings are: disabled refuse binary mode negotiation (INTERACTIVE) flowControl pass all but XON and XOF… |
| 1.3.6.1.4.1.33.10.6.1.1.8 | ColumntelnetPortSendLocation | read-write | mandatory | A control indicating whether a Telnet session will initiate negotiation of the Send Location option. Corresponds directly to the PORT TELNET LOCATION and the v… |
| 1.3.6.1.4.1.33.10.6.1.1.9 | ColumntelnetPortClientLocation | read-only | mandatory | The location of the Telnet client port. Corresponds directly to the value labeled 'Telnet Client Location' in the SESSION display. |
| 1.3.6.1.4.1.33.10.6.1.1.10 | ColumntelnetPortPassiveSendLocation | read-write | mandatory | A control indicating whether a Telnet session will passively respond to negotiation of the Send Location option. When disabled and telnetPortSendLocation is di… |
| 1.3.6.1.4.1.33.10.6.2 | TabletelnetSerialPortTable | not-accessible | mandatory | A list of Telnet character port entries. |
| 1.3.6.1.4.1.33.10.6.2.1 | RowtelnetSerialPortEntry | not-accessible | mandatory | Telnet parameter values for a character port. |
| 1.3.6.1.4.1.33.10.6.2.1.1 | ColumntelnetSerialPortIndex | read-only | mandatory | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the … |
| 1.3.6.1.4.1.33.10.6.2.1.2 | ColumntelnetSerialPortOptionDisplay | read-write | mandatory | Control for display of Telnet option negotiations. Corresponds directly to PORT TELNET OPTION DISPLAY and the value labeled 'Option Display:' in the PORT TELNE… |
| 1.3.6.1.4.1.33.10.6.2.1.3 | ColumntelnetSerialPortCsiEscape | read-write | mandatory | Control for translation of 8-bit escape sequences received from the character port to 7-bit equivalents before transmission to the remote partner. Corresponds … |
| 1.3.6.1.4.1.33.10.6.2.1.4 | ColumntelnetSerialPortEchoMode | read-write | mandatory | Control for who echoes characters that come from the character port. The value meanings are: local terminal server echoes locally remote remote system echoes d… |
| 1.3.6.1.4.1.33.10.6.2.1.5 | ColumntelnetSerialPortNewlineMode | read-write | mandatory | Translation to apply to newline (carriage return) received from the character port, before sending the newline to the remote partner. The correspondence to com… |
| 1.3.6.1.4.1.33.10.6.2.1.6 | ColumntelnetSerialPortTransmitMode | read-write | mandatory | Criterion for deciding to send to the remote partner characters received from the character port. Corresponds directly to PORT TELNET TRANSMIT and the value la… |
| 1.3.6.1.4.1.33.10.6.2.1.7 | ColumntelnetSerialPortTransmitCharacterTimes | read-write | mandatory | Number of character times to wait before transmitting when telnetSerialPortTransmitMode value is 'timed'. Corresponds directly to PORT TELNET TRANSMIT IDLETIME… |
| 1.3.6.1.4.1.33.10.6.2.1.8 | ColumntelnetSerialPortAbortOutputCharacter | read-write | mandatory | Character input from the character port to cause aborting output. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET ABORT… |
| 1.3.6.1.4.1.33.10.6.2.1.9 | ColumntelnetSerialPortAttentionCharacter | read-write | mandatory | Character input from the character port to cause an attention notification to the remote partner. The value 0 indicates no character has this effect. Correspon… |
| 1.3.6.1.4.1.33.10.6.2.1.10 | ColumntelnetSerialPortEraseKeyCharacter | read-write | mandatory | Character input from the character port to cause erasure of the previous input character. The value 0 indicates no character has this effect. Corresponds direc… |
| 1.3.6.1.4.1.33.10.6.2.1.11 | ColumntelnetSerialPortEraseLineCharacter | read-write | mandatory | Character input from the character port to cause erasure of the previous line of input. The value 0 indicates no character has this effect. Corresponds directl… |
| 1.3.6.1.4.1.33.10.6.2.1.12 | ColumntelnetSerialPortInterruptCharacter | read-write | mandatory | Character input from the character port to cause sending an interrupt notification to the remote partner. The value 0 indicates no character has this effect. C… |
| 1.3.6.1.4.1.33.10.6.2.1.13 | ColumntelnetSerialPortQueryCharacter | read-write | mandatory | Character input from the character port to cause sending a status query to the remote partner. The value 0 indicates no character has this effect. Corresponds … |
| 1.3.6.1.4.1.33.10.6.2.1.14 | ColumntelnetSerialPortSynchronizeCharacter | read-write | mandatory | Character input from the character port to cause sending a synchronization attempt to the remote partner. The value 0 indicates no character has this effect. C… |
| 1.3.6.1.4.1.33.10.6.2.1.15 | ColumntelnetSerialPortUrgentBreak | read-write | mandatory | Control for encoding breaks as Telnet urgent data. Corresponds directly to PORT TELNET URGENT BREAK and the value labeled 'Urgent Break:' in the PORT TELNET CH… |
| 1.3.6.1.4.1.33.10.6.2.1.16 | ColumntelnetSerialPortRs491 | read-write | mandatory | A control to enable RS491 protocol processing on a port. |
| 1.3.6.1.4.1.33.10.6.2.1.17 | ColumntelnetSerialPortTransmitBufferedTime | read-write | mandatory | Number of milliseconds to wait before transmitting when telnetSerialPortTransmitMode value is 'timed'. Corresponds directly to PORT TELNET TRANSMIT BUFFERED an… |
| 1.3.6.1.4.1.33.10.6.2.1.18 | ColumntelnetSerialPortInterpretInterruptAsBreak | read-write | mandatory | Control to interpret a Telnet Interrupt Character coming from the network as a Telnet Break Character, and to send a break out the serial port. This control is… |
| 1.3.6.1.4.1.33.10.6.2.1.19 | ColumntelnetSerialPortPass8d | read-write | mandatory | Control to pass unaltered the hexadecimal character '8D'. This control is added to ensure that this character will pass through directly in a session with 8-bi… |
| 1.3.6.1.4.1.33.10.6.2.1.20 | ColumntelnetSerialPortComControlClient | read-write | mandatory | Control to begin Telnet comport control option negotiations as a client when a Telnet session is initiated. The comport control option enables a port to do out… |
| 1.3.6.1.4.1.33.10.6.2.1.21 | ColumntelnetSerialPortComControlServer | read-write | mandatory | Control to begin Telnet comport control option negotiations as a server when a Telnet session is initiated. Corresponds to the value labeled 'Server:' in the P… |
| 1.3.6.1.4.1.33.10.6.2.1.22 | ColumntelnetSerialPortComControlServerRaisesDtr | read-write | mandatory | Control for the client to request that the server raises its DTR signal on the port at the begining of the Telnet connection. Corresponds to the value labeled … |
| 1.3.6.1.4.1.33.10.6.2.1.23 | ColumntelnetSerialPortComControlClientTogglesDtr | read-write | mandatory | Control to respond to the server's notification that its DCD has come high (or low) by raising (or lowering) DTR accordingly on the local port. Corresponds to … |
| 1.3.6.1.4.1.33.10.7 | NodexTn3270 | |||
| 1.3.6.1.4.1.33.10.7.1 | Scalartn3270DeviceNumber | read-only | mandatory | The number of entries in the tn3270 Device table. |
| 1.3.6.1.4.1.33.10.7.2 | Scalartn3270LanguageNumber | read-only | mandatory | The number of entries in the tn3270 Language table. |
| 1.3.6.1.4.1.33.10.7.3 | Scalartn3270PortKeymapStatus | read-write | mandatory | Control for individual ports to create their own keymaps. Corresponds directly to SERVER TN3270 PORT KEYMAPS and the value labeled 'Port Keymaps:' in the SERVE… |
| 1.3.6.1.4.1.33.10.7.4 | Tabletn3270DeviceTable | not-accessible | mandatory | A list of tn3270 terminal device entries. |
| 1.3.6.1.4.1.33.10.7.4.1 | Rowtn3270DeviceEntry | not-accessible | mandatory | Tn3270 parameter values for a terminal device entry. |
| 1.3.6.1.4.1.33.10.7.4.1.1 | Columntn3270DeviceName | read-only | mandatory | The name of a generic terminal device. Corresponds directly to SERVER TN3270 DEVICE and the value labeled 'Device Name:' in the SERVER TN3270 DEVICE display. |
| 1.3.6.1.4.1.33.10.7.4.1.2 | Columntn3270DeviceStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry, corresponding directly to the PURGE SERVER TN3270 DEVICE command. It is an implemen… |
| 1.3.6.1.4.1.33.10.7.4.1.3 | Columntn3270DeviceType | read-write | mandatory | The terminal type character string for use when tn3270DeviceTn3270Type is insufficient. Corresponds directly to SERVER TN3270 DEVICE TERMINALTYPE and the value… |
| 1.3.6.1.4.1.33.10.7.4.1.4 | Columntn3270Device3278Model | read-write | mandatory | The 3278 model for the device. Corresponds directly to SERVER TN3270 DEVICE 3278Model and the value labeled '3278Model:' in the SERVER TN3270 DEVICE display. |
| 1.3.6.1.4.1.33.10.7.4.1.5 | Columntn3270DeviceKeyNumber | read-only | mandatory | The number of Key table entries for this device. |
| 1.3.6.1.4.1.33.10.7.4.1.6 | Columntn3270DeviceScreenNumber | read-only | mandatory | The number of Screen table entries for this device. |
| 1.3.6.1.4.1.33.10.7.5 | Tabletn3270KeyTable | not-accessible | mandatory | A list of tn3270 key entries by device. |
| 1.3.6.1.4.1.33.10.7.5.1 | Rowtn3270KeyEntry | not-accessible | mandatory | Tn3270 parameter values for a key entry for a device. |
| 1.3.6.1.4.1.33.10.7.5.1.1 | Columntn3270KeyDeviceName | read-only | mandatory | The name of a generic terminal device as in tn3270DeviceName. Corresponds directly to SERVER TN3270 DEVICE and the value labeled 'Device Name:' in the SERVER T… |
| 1.3.6.1.4.1.33.10.7.5.1.2 | Columntn3270KeyName | read-only | mandatory | The key name to which this entry applies. Corresponds directly to the key portion of SERVER TN3270 DEVICE KEYMAP and the value labeled '3270-key' in the 'Keyma… |
| 1.3.6.1.4.1.33.10.7.5.1.3 | Columntn3270KeyStatus | read-write | deprecated | Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalida… |
| 1.3.6.1.4.1.33.10.7.5.1.4 | Columntn3270KeyCharacterSequence | read-write | mandatory | The ASCII character sequence for the key. Corresponds directly to the escape-sequence portion of SERVER TN3270 DEVICE KEYMAP and the value labeled 'KeyCode' in… |
| 1.3.6.1.4.1.33.10.7.5.1.5 | Columntn3270KeyDescription | read-write | mandatory | Descriptive text for the key. Corresponds directly to the description portion of SERVER TN3270 DEVICE KEYMAP and the value labeled 'Description' in the SERVER … |
| 1.3.6.1.4.1.33.10.7.6 | Tabletn3270ScreenTable | not-accessible | mandatory | A list of tn3270 screen action entries by device. |
| 1.3.6.1.4.1.33.10.7.6.1 | Rowtn3270ScreenEntry | not-accessible | mandatory | Tn3270 parameter values for a screen action entry for a device. |
| 1.3.6.1.4.1.33.10.7.6.1.1 | Columntn3270ScreenDeviceName | read-only | mandatory | The name of a generic terminal device as in tn3270DeviceName. Corresponds directly to SERVER TN3270 DEVICE and the value labeled 'Device Name:' in the SERVER T… |
| 1.3.6.1.4.1.33.10.7.6.1.2 | Columntn3270ScreenActionName | read-only | mandatory | The screen action to which this entry applies. Corresponds directly to the action portion of SERVER TN3270 DEVICE SCREENMAP and the value labeled 'Terminal Fun… |
| 1.3.6.1.4.1.33.10.7.6.1.3 | Columntn3270ScreenStatus | read-write | deprecated | Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalida… |
| 1.3.6.1.4.1.33.10.7.6.1.4 | Columntn3270ScreenCharacterSequence | read-write | mandatory | The ASCII character sequence for the screen action. Some actions may have a lesser length limit. Corresponds directly to the escape-sequence portion of SERVER … |
| 1.3.6.1.4.1.33.10.7.7 | Tabletn3270LanguageTable | not-accessible | mandatory | A list of tn3270 language entries. |
| 1.3.6.1.4.1.33.10.7.7.1 | Rowtn3270LanguageEntry | not-accessible | mandatory | Tn3270 parameter values for a language entry. |
| 1.3.6.1.4.1.33.10.7.7.1.1 | Columntn3270LanguageName | read-only | mandatory | The name of language for character translation tables. Corresponds directly to SERVER TN3270 LANGUAGE and the value labeled 'Language Name:' in the SERVER LANG… |
| 1.3.6.1.4.1.33.10.7.7.1.2 | Columntn3270LanguageStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalida… |
| 1.3.6.1.4.1.33.10.7.8 | TableeToALanguageTable | not-accessible | mandatory | A list of language EBCDIC to ASCII conversion entries. |
| 1.3.6.1.4.1.33.10.7.8.1 | RoweToALanguageEntry | not-accessible | mandatory | EBCDIC to ASCII parameter values for a language entry. |
| 1.3.6.1.4.1.33.10.7.8.1.1 | ColumneToALanguageName | read-only | mandatory | The name of language from the language table. |
| 1.3.6.1.4.1.33.10.7.8.1.2 | ColumneToAOffset | read-only | mandatory | EBCDIC character offset plus one, that is, the value 1 corresponds to an operational offset of 0. Corresponds directly to the offset portion of SERVER TN3270 L… |
| 1.3.6.1.4.1.33.10.7.8.1.3 | ColumneToAValue | read-write | mandatory | ASCII character value for the EBCDIC offset. Corresponds directly to the value portion of SERVER TN3270 LANGUAGE and the values in the conversion table labeled… |
| 1.3.6.1.4.1.33.10.7.9 | TableaToELanguageTable | not-accessible | mandatory | A list of language ASCII to EBCDIC conversion entries. |
| 1.3.6.1.4.1.33.10.7.9.1 | RowaToELanguageEntry | not-accessible | mandatory | ASCII to EBCDIC parameter values for a language entry. |
| 1.3.6.1.4.1.33.10.7.9.1.1 | ColumnaToELanguageName | read-only | mandatory | The name of language from the language table. |
| 1.3.6.1.4.1.33.10.7.9.1.2 | ColumnaToEOffset | read-only | mandatory | ASCII character offset plus one, that is, the value 1 corresponds to an operational offset of 0. Corresponds directly to the offset portion of SERVER TN3270 LA… |
| 1.3.6.1.4.1.33.10.7.9.1.3 | ColumnaToEValue | read-write | mandatory | EBCDIC character value for the ASCII offset. Corresponds directly to the value portion of SERVER TN3270 LANGUAGE and the values in the conversion table labeled… |
| 1.3.6.1.4.1.33.10.7.10 | Tabletn3270PortTable | not-accessible | mandatory | A list of tn3270 character port entries. |
| 1.3.6.1.4.1.33.10.7.10.1 | Rowtn3270PortEntry | not-accessible | mandatory | Parameter values for a tn3270 port. |
| 1.3.6.1.4.1.33.10.7.10.1.1 | Columntn3270PortIndex | read-only | mandatory | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the … |
| 1.3.6.1.4.1.33.10.7.10.1.2 | Columntn3270PortDeviceName | read-write | mandatory | The name of a generic terminal device from the tn3270 device table. Corresponds directly to PORT TELNET TN3270 DEVICE and the value labeled 'Tn3270 Device:' in… |
| 1.3.6.1.4.1.33.10.7.10.1.3 | Columntn3270PortLanguageName | read-write | mandatory | The name of language from the tn3270 language table. Corresponds directly to PORT TELNET TN3270 LANGUAGE and the value labeled 'Tn3270 Language:' in the PORT T… |
| 1.3.6.1.4.1.33.10.7.10.1.4 | Columntn3270PortExtendedAttributes | read-write | mandatory | A control indicating that certain 3270 extended attributes are supported on the port. Corresponds directly to PORT TELNET TN3270 XTDATTRS and the label 'Tn3270… |
| 1.3.6.1.4.1.33.10.7.10.1.5 | Columntn3270PortEorNegotiation | read-write | mandatory | A control for negotiation of the Telnet EOR option when establishing a tn3270 session on the port. Corresponds directly to PORT TELNET TN3270 EOR and the label… |
| 1.3.6.1.4.1.33.10.7.10.1.6 | Columntn3270PortErrorLock | read-write | mandatory | A control for requiring use the RESET key when the host reports an error during a tn3270 session on the port. Corresponds directly to PORT TELNET TN3270 ERRORL… |
| 1.3.6.1.4.1.33.10.7.10.1.7 | Columntn3270PortPrinterPort | read-write | mandatory | The port number of the tn3270 printer. Corresponds directly to PORT TELNET TN3270 PRINTER and the value labeled 'Tn3270 Printer:' in the PORT TELNET display. |
| 1.3.6.1.4.1.33.10.7.10.1.8 | Columntn3270PortOutgoingTcpPort | read-write | mandatory | The TCP port which is used for a TN3270 session when connecting to a remote host from this serial port. Corresponds directly to the value labeled 'Tn3270 Defau… |
| 1.3.6.1.4.1.33.10.7.10.1.9 | Columntn3270PortSpaceInsert | read-write | mandatory | Control to allow insert mode within a space filled field, and write characters over EBCDIC spaces. Corresponds directly to the presence of 'Tn3270 Space_Insert… |
| 1.3.6.1.4.1.33.10.7.10.1.10 | Columntn3270PortTypeAhead | read-write | mandatory | Control to permit typing ahead in a tn3270 session prior to receiving a response from the host for the previous command entered. Corresponds directly to the pr… |
| 1.3.6.1.4.1.33.10.7.10.1.11 | Columntn3270PrefixKeyMap | read-write | mandatory | Control to prepend a prefix function to another function key. When the operator hits the key the prepended function(s) and then the main function for the key a… |
| 1.3.6.1.4.1.33.10.7.10.1.12 | Columntn3270PortScanner | read-write | mandatory | Indicates that this is a tn3270 scanner port. Corresponds directly to the presence of 'Tn3270 SCANNER' under the label 'Enabled Characteristics' in the PORT TE… |
| 1.3.6.1.4.1.33.10.8 | NodexKerberos | |||
| 1.3.6.1.4.1.33.10.8.1 | ScalarkerbStatus | read-write | mandatory | A control indicating the level of Kerberos operation on the system. Corresponds directly to SERVER KERBEROS STATUS and the value labeled 'Kerberos Security:' i… |
| 1.3.6.1.4.1.33.10.8.2 | ScalarkerbRealm | read-write | mandatory | The Kerberos realm with which the kerbServerName1 and kerbServerName2 are associated. Corresponds directly to SERVER KERBEROS REALM and the value labeled 'Kerb… |
| 1.3.6.1.4.1.33.10.8.3 | ScalarkerbQueryLimit | read-write | mandatory | The maximum number of attempts the system can make when trying to verify a Kerberos ID. Corresponds directly to SERVER KERBEROS QUERY LIMIT and the value label… |
| 1.3.6.1.4.1.33.10.8.4 | ScalarkerbMasterName | read-write | mandatory | The Domain name of the Kerberos master host system, which holds the Kerberos database. Corresponds directly to SERVER KERBEROS MASTER and the value labeled 'Ke… |
| 1.3.6.1.4.1.33.10.8.5 | ScalarkerbServerName1 | read-write | mandatory | The Domain name of the first Kerberos server to try when the system verifys a Kerberos ID. Corresponds directly to SERVER KERBEROS PRIMARY SERVER and the value… |
| 1.3.6.1.4.1.33.10.8.6 | ScalarkerbServerName2 | read-write | mandatory | The Domain name of the Kerberos server to try when the system verifys a Kerberos ID and cannot reach the Kerberos primary server. Corresponds directly to SERVE… |
| 1.3.6.1.4.1.33.10.8.7 | ScalarkerbInsecureLogins | read-only | mandatory | The number of user logins on ports for which Kerberos user verification is not enabled. Corresponds directly to the value labeled 'Logins without Kerberos:' in… |
| 1.3.6.1.4.1.33.10.8.8 | ScalarkerbSecureLogins | read-only | mandatory | The number of successful user logins on ports for which Kerberos user verification is enabled. Corresponds directly to the value labeled 'Successful Logins:' i… |
| 1.3.6.1.4.1.33.10.8.9 | ScalarkerbSecureLoginsFailed | read-only | mandatory | The number of verification failures due to incorrect ID or password for attempted user logins on ports for which Kerberos user verification is enabled. Corresp… |
| 1.3.6.1.4.1.33.10.8.10 | ScalarkerbPasswordChangeFailed | read-only | mandatory | The number of user failures to change their Kerberos password due to invalid old password or new password verification. Corresponds directly to the value label… |
| 1.3.6.1.4.1.33.10.8.11 | ScalarkerbError | read-only | mandatory | The error number of the most recent Kerberos-related failure. Corresponds directly to the value labeled 'Last Kerberos Error:' in the SERVER KERBEROS display. … |
| 1.3.6.1.4.1.33.10.8.12 | ScalarkerbErrorTime | read-only | mandatory | The date and time that kerbError was last updated. Corresponds directly to the value labeled 'Occurred:' in the SERVER KERBEROS display. |
| 1.3.6.1.4.1.33.10.8.13 | ScalarkerbMasterAccess | read-only | mandatory | The number of times the system successfully accessed the Kerberos master host. Corresponds directly to the value labeled 'Attempts to access:', 'Master', and '… |
| 1.3.6.1.4.1.33.10.8.14 | ScalarkerbMasterAccessFailed | read-only | mandatory | The number of times the system failed access to the Kerberos master host. Corresponds directly to the value labeled 'Attempts to access:', 'Master', and 'Unsuc… |
| 1.3.6.1.4.1.33.10.8.15 | ScalarkerbServerAccess1 | read-only | mandatory | The number of times the system successfully accessed the Kerberos primary server. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', a… |
| 1.3.6.1.4.1.33.10.8.16 | ScalarkerbServerAccessFailed1 | read-only | mandatory | The number of times the system failed access to the Kerberos primary server. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', and 'U… |
| 1.3.6.1.4.1.33.10.8.17 | ScalarkerbServerAccess2 | read-only | mandatory | The number of times the system successfully accessed the Kerberos secondary server. Corresponds directly to the value labeled 'Attempts to access:', 'Server2',… |
| 1.3.6.1.4.1.33.10.8.18 | ScalarkerbServerAccessFailed2 | read-only | mandatory | The number of times the system failed access to the Kerberos secondary server. Corresponds directly to the value labeled 'Attempts to access:', 'Server2', and … |
| 1.3.6.1.4.1.33.10.8.19 | TablekerbPortTable | not-accessible | mandatory | A list of Kerberos character port entries. |
| 1.3.6.1.4.1.33.10.8.19.1 | RowkerbPortEntry | not-accessible | mandatory | Parameter values for a Kerberos port. |
| 1.3.6.1.4.1.33.10.8.19.1.1 | ColumnkerbPortIndex | read-only | mandatory | An index value that uniquely identifies a port could relate to Kerberos. The port identified by a particular value of this index is the same port as identified… |
| 1.3.6.1.4.1.33.10.8.19.1.2 | ColumnkerbPortStatus | read-write | mandatory | A control indicating the level of Kerberos operation on the port. Corresponds directly to PORT KERBEROS and the value 'Kerberos' following the label 'Enabled C… |
| 1.3.6.1.4.1.33.10.8.20 | ScalarkerbServerPort | read-write | mandatory | The UDP port number on the Kerberos server where Kerberos messages are sent. |
| 1.3.6.1.4.1.33.10.9 | NodexPortSecurity | |||
| 1.3.6.1.4.1.33.10.9.1 | ScalarpsEntryNumber | read-only | mandatory | The number of security entries in this system's port security table with psEntryStatus of 'valid'. |
| 1.3.6.1.4.1.33.10.9.2 | ScalarpsEntryNumberLimit | read-only | mandatory | The maximum number of security entries in this system's port security table. |
| 1.3.6.1.4.1.33.10.9.3 | ScalarpsEntryInvalidIndex | read-only | mandatory | A value of psEntryIndex for an entry that has psEntryStatus of 'invalid'. A management station may choose this value when adding a new entry. Collisions betwee… |
| 1.3.6.1.4.1.33.10.9.4 | TablepsPortTable | not-accessible | mandatory | A list of port security character port entries. |
| 1.3.6.1.4.1.33.10.9.4.1 | RowpsPortEntry | not-accessible | mandatory | Port security parameter values for a port. |
| 1.3.6.1.4.1.33.10.9.4.1.1 | ColumnpsPortIndex | read-only | mandatory | An index value that uniquely identifies a port for security purposes. The port identified by a particular value of this index is the same port as identified by… |
| 1.3.6.1.4.1.33.10.9.4.1.2 | ColumnpsPortDefaultInboundAccess | read-write | mandatory | The default access to the port for incoming TCP connections. Corresponds directly to PORT INTERNET SECURITY DEFAULT INBOUND and the value labeled 'Inbound Defa… |
| 1.3.6.1.4.1.33.10.9.4.1.3 | ColumnpsPortDefaultOutboundAccess | read-write | mandatory | The default access to the port for outgoing TCP connections. Corresponds directly to PORT INTERNET SECURITY DEFAULT OUTBOUND and the value labeled 'Outbound De… |
| 1.3.6.1.4.1.33.10.9.4.1.4 | ColumnpsClrInternetSecurity | read-write | mandatory | A control for if the internet security entries for this port will be cleared upon port logout. The default is disabled. |
| 1.3.6.1.4.1.33.10.9.5 | TablepsTable | not-accessible | mandatory | A list of port security entries. |
| 1.3.6.1.4.1.33.10.9.5.1 | RowpsEntry | not-accessible | mandatory | Port security parameter values for an entry for a port. |
| 1.3.6.1.4.1.33.10.9.5.1.1 | ColumnpsEntryIndex | read-only | mandatory | A small, numeric distinguisher for port security entries. When adding a new entry, the client should specify an unused value, such as psEntryInvalidIndex. Corr… |
| 1.3.6.1.4.1.33.10.9.5.1.2 | ColumnpsEntryStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry, corresponding directly to the CLEAR INTERNET SECURITY command. It is an implementat… |
| 1.3.6.1.4.1.33.10.9.5.1.3 | ColumnpsEntryAddress | read-write | mandatory | The IP address to which the entry pertains. Corresponds directly to the PORT INTERNET SECURITY internet address and the value labeled 'Internet Address' in the… |
| 1.3.6.1.4.1.33.10.9.5.1.4 | ColumnpsEntryMask | read-write | mandatory | The mask applied to psEntryAddress when making a security check based on this entry. Corresponds directly to PORT INTERNET SECURITY MASK and the value labeled … |
| 1.3.6.1.4.1.33.10.9.5.1.5 | ColumnpsEntryAccess | read-write | mandatory | The access to the port for TCP connections when making a security check based on this entry. Corresponds directly to PORT INTERNET SECURITY ALLOW or DENY and t… |
| 1.3.6.1.4.1.33.10.9.5.1.6 | ColumnpsEntryDirection | read-write | mandatory | The direction of TCP connections to which this entry applies. Corresponds directly to PORT INTERNET SECURITY INBOUND or OUTBOUND and the value labeled 'Directi… |
| 1.3.6.1.4.1.33.10.9.5.1.7 | ColumnpsEntryPortMap | read-write | mandatory | The list of character ports to which this entry applies. The OCTET STRING contains a bitmap, with one bit for each port, and enough octets for all the ports on… |
| 1.3.6.1.4.1.33.10.10 | NodexXremote | |||
| 1.3.6.1.4.1.33.10.10.1 | ScalarxremoteServerName1 | read-write | mandatory | The Domain name of the first XREMOTE font server to try for downloading fonts. Corresponds directly to SERVER XREMOTE PRIMARY SERVER and the value labeled 'Xre… |
| 1.3.6.1.4.1.33.10.10.2 | ScalarxremoteServerName2 | read-write | mandatory | The Domain name of the XREMOTE font server to try for downloading fonts and the primary font server does not respond. Corresponds directly to SERVER XREMOTE SE… |
| 1.3.6.1.4.1.33.10.10.3 | ScalarxremoteServerAccess1 | read-only | mandatory | The number of times the system successfully accessed the XREMOTE primary font server. Corresponds directly to the value labeled 'Attempts to access:', 'Server1… |
| 1.3.6.1.4.1.33.10.10.4 | ScalarxremoteServerAccessFailed1 | read-only | mandatory | The number of times the system failed access to the XREMOTE primary font server. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', an… |
| 1.3.6.1.4.1.33.10.10.5 | ScalarxremoteServerAccess2 | read-only | mandatory | The number of times the system successfully accessed the XREMOTE secondary font server. Corresponds directly to the value labeled 'Attempts to access:', 'Serve… |
| 1.3.6.1.4.1.33.10.10.6 | ScalarxremoteServerAccessFailed2 | read-only | mandatory | The number of times the system failed access to the XREMOTE secondary font server. Corresponds directly to the value labeled 'Attempts to access:', 'Server2', … |
| 1.3.6.1.4.1.33.10.10.7 | ScalarxremoteSessions | read-only | mandatory | The number of connected XREMOTE sessions. Corresponds directly to the value labeled 'Current Number of Xremote Sessions:' in the SERVER XREMOTE display. |
| 1.3.6.1.4.1.33.10.10.8 | TablexremotePortTable | not-accessible | mandatory | A list of XREMOTE character port entries. |
| 1.3.6.1.4.1.33.10.10.8.1 | RowxremotePortEntry | not-accessible | mandatory | XREMOTE parameter values for a port. |
| 1.3.6.1.4.1.33.10.10.8.1.1 | ColumnxremotePortIndex | read-only | mandatory | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the … |
| 1.3.6.1.4.1.33.10.10.8.1.2 | ColumnxremotePortXremote | read-write | mandatory | Control for use of XREMOTE on the port. Corresponds directly to PORT XREMOTE and the presence of the label 'Xremote' following the label 'Enabled Characteristi… |
| 1.3.6.1.4.1.33.10.10.8.1.3 | ColumnxremotePortXdmQuery | read-write | mandatory | The type of query message issued by a port when searching for an X Display Manager (XDM). Corresponds directly to the PORT XDM QUERY and the 'XDM Query:' in th… |
| 1.3.6.1.4.1.33.10.10.8.1.4 | ColumnxremotePortXdmHost | read-write | mandatory | The Domain name or Internet address of the X Display Manager (XDM) for a port. Corresponds directly to the PORT XDM HOST and the 'XDM Host:' in the PORT ALTERN… |
| 1.3.6.1.4.1.33.10.10.9 | ScalarxremoteServerClients | read-only | mandatory | The number of active X clients. Corresponds directly to the value labeled 'Current Number of XClients:' in the SERVER XREMOTE display. |
| 1.3.6.1.4.1.33.10.11 | NodexRotary | |||
| 1.3.6.1.4.1.33.10.11.1 | ScalarrotaryNumber | read-only | mandatory | The number of entries in the Rotary table. |
| 1.3.6.1.4.1.33.10.11.2 | TablerotaryTable | not-accessible | mandatory | A list of rotary entries. |
| 1.3.6.1.4.1.33.10.11.2.1 | RowrotaryEntry | not-accessible | mandatory | Parameter values for a rotary. |
| 1.3.6.1.4.1.33.10.11.2.1.1 | ColumnrotaryAddress | read-only | mandatory | The internet address to be recognized as a rotary. Corresponds directly to the ip-address portion of SERVER INTERNET ROTARY and the value labeled 'Internet Add… |
| 1.3.6.1.4.1.33.10.11.2.1.2 | ColumnrotaryStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry, corresponding directly to the CLEAR SERVER INTERNET ROTARY command. It is an implem… |
| 1.3.6.1.4.1.33.10.11.2.1.3 | ColumnrotaryPortMap | read-write | mandatory | The list of character ports that compose the rotary. The OCTET STRING contains a bitmap, with one bit for each port, and enough octets for all the ports on the… |
| 1.3.6.1.4.1.33.10.12 | NodexEgp | |||
| 1.3.6.1.4.1.33.10.12.1 | ScalaregpRouting | read-write | mandatory | Control for EGP routing services. |
| 1.3.6.1.4.1.33.10.12.2 | ScalaregpStatus | read-only | mandatory | Status of the EGP routing services indicating why it is not running. |
| 1.3.6.1.4.1.33.10.12.3 | TableegpNbrTable | not-accessible | mandatory | The EGP neighbor table. |
| 1.3.6.1.4.1.33.10.12.3.1 | RowegpNbrEntry | not-accessible | mandatory | Information about this entity's relationship with a particular EGP neighbor. |
| 1.3.6.1.4.1.33.10.12.3.1.1 | ColumnegpNbrAddr | read-only | mandatory | The IP address of this entry's EGP neighbor. |
| 1.3.6.1.4.1.33.10.12.3.1.2 | ColumnegpNbrIntervalDead | read-write | mandatory | The interval upon entering the cease or idle state before automatically assuming a Start Event has occured. If a neighbor does not respond within 5 minutes, a … |
| 1.3.6.1.4.1.33.10.12.3.1.3 | ColumnegpNbrStatus | read-write | mandatory | The status of the entry for this neighbor. Set to 'invalid' to remove the entry. |
| 1.3.6.1.4.1.33.10.13 | NodexOspf | |||
| 1.3.6.1.4.1.33.10.13.1 | ScalarospfAutoConfigure | read-write | mandatory | Control whether OSPF will automatically configure itself. |
| 1.3.6.1.4.1.33.10.13.2 | ScalarospfStatus | read-only | mandatory | Status of the OSPF routing services indicating why it is not running. |
| 1.3.6.1.4.1.33.10.13.3 | TableospfIfMtrcTable | not-accessible | mandatory | The TOS metrics for a non-virtual interface identified by the interface index. |
| 1.3.6.1.4.1.33.10.13.3.1 | RowospfIfMtrcEntry | not-accessible | mandatory | A particular TOS metric for a non-virtual interface identified by the interface index. |
| 1.3.6.1.4.1.33.10.13.3.1.1 | ColumnospfIfMtrcIpAddress | read-only | mandatory | Same as ospfIfMetricIpAddress in OSPF MIB, the IP address of this OSPF interface. |
| 1.3.6.1.4.1.33.10.13.3.1.2 | ColumnospfIfMtrcAddressLessIf | read-only | mandatory | Same as ospfIfMetricAddressLessIf in OSPF MIB, for the purpose of easing the instancing of addressed and addressless interfaces. This variable takes the value … |
| 1.3.6.1.4.1.33.10.13.3.1.3 | ColumnospfIfMtrcTos | read-only | mandatory | Same as ospfIfMetricTOS in OSPF MIB, the type of service metric being referenced. |
| 1.3.6.1.4.1.33.10.13.3.1.4 | ColumnospfIfMtrcCostActual | read-only | mandatory | The actual cost of the metric in case it was set to auto. |
| 1.3.6.1.4.1.33.10.13.4 | TableospfXIfTable | not-accessible | mandatory | The TOS metrics for a non-virtual interface identified by the interface index. |
| 1.3.6.1.4.1.33.10.13.4.1 | RowospfXIfEntry | not-accessible | mandatory | Interface parameters for OSPF. |
| 1.3.6.1.4.1.33.10.13.4.1.1 | ColumnospfXIfIpAddress | read-only | mandatory | Same as ospfIfIpAddress in OSPF MIB, the IP address of this OSPF interface. |
| 1.3.6.1.4.1.33.10.13.4.1.2 | ColumnospfXIfAddressLessIf | read-only | mandatory | Same as ospfIfAddressLessIf in OSPF MIB, for the purpose of easing the instancing of addressed and addressless interfaces. This variable takes the value 0 on i… |
| 1.3.6.1.4.1.33.10.13.4.1.3 | ColumnospfXIfTypeActual | read-only | mandatory | The interface type. |
| 1.3.6.1.4.1.33.10.13.4.1.4 | ColumnospfXIfStatus | read-write | mandatory | The status of the interface entry, including the entry in the standard OSPF MIB. Set to 'invalid' to remove the entry. |
| 1.3.6.1.4.1.33.10.13.5 | TableospfXAreaTable | not-accessible | mandatory | Parameters for an OSPF area. |
| 1.3.6.1.4.1.33.10.13.5.1 | RowospfXAreaEntry | not-accessible | mandatory | An area entry. |
| 1.3.6.1.4.1.33.10.13.5.1.1 | ColumnospfXAreaId | read-only | mandatory | Same as ospfAreaId in OSPF MIB, the ID of the area. |
| 1.3.6.1.4.1.33.10.13.5.1.2 | ColumnospfXAreaStatus | read-write | mandatory | The status of the area entry, including the entry in the standard OSPF MIB. Set to 'invalid' to remove the entry. |
| 1.3.6.1.4.1.33.10.14 | NodexRouterIp | |||
| 1.3.6.1.4.1.33.10.14.1 | TableipAdExtTable | not-accessible | mandatory | Table of additional fields indexed by local IP address. An entry in this table is created or deleted when an entry in the ipAddrTable is created or deleted. |
| 1.3.6.1.4.1.33.10.14.1.1 | RowipAdExtEntry | not-accessible | mandatory | A particular entry. |
| 1.3.6.1.4.1.33.10.14.1.1.1 | ColumnipAdEntExtAddress | read-only | mandatory | Same as ipAdEntAddr, a local address representing a network connection. |
| 1.3.6.1.4.1.33.10.14.1.1.2 | ColumnipAdEntExtProxyArp | read-write | mandatory | Controls whether proxy ARP is active for this local address. |
| 1.3.6.1.4.1.33.10.14.1.1.3 | ColumnipAdEntExtRip | read-only | deprecated | Controls whether RIP as a router discovery protocol is active for this local address. |
| 1.3.6.1.4.1.33.10.14.2 | TableipRouterIfTable | not-accessible | mandatory | Table of IP router values indexed by interface. |
| 1.3.6.1.4.1.33.10.14.2.1 | RowipRouterIfEntry | not-accessible | mandatory | A particular entry. |
| 1.3.6.1.4.1.33.10.14.2.1.1 | ColumnipRouterIfIndex | read-only | mandatory | The index of the interface; same as IfIndex. |
| 1.3.6.1.4.1.33.10.14.2.1.2 | ColumnipRouterIfProtocolPriority | read-write | mandatory | The priority at which all Internet routed packets will be placed on the WAN output queue. |
| 1.3.6.1.4.1.33.10.14.2.1.3 | ColumnipRouterIfMTU | read-write | mandatory | The size of the largest datagram that IP can transmit on this interface. The default value is actually hardware dependent. |
| 1.3.6.1.4.1.33.10.14.2.1.4 | ColumnipRouterIfRDP | read-write | mandatory | Control for whether the router side of the Router Discovery Protocol is running on this interface. |
| 1.3.6.1.4.1.33.10.14.2.1.5 | ColumnipRouterIfArpPacketsIn | read-only | mandatory | The number of ARP packets received on this interface. |
| 1.3.6.1.4.1.33.10.14.2.1.6 | ColumnipRouterIfArpPacketsOut | read-only | mandatory | The number of ARP packets sent on this interface. |
| 1.3.6.1.4.1.33.10.14.2.1.7 | ColumnipRouterIfPacketsIn | read-only | mandatory | The number of IP packets received on this interface. |
| 1.3.6.1.4.1.33.10.14.2.1.8 | ColumnipRouterIfPacketsOut | read-only | mandatory | The number of IP packets sent on this interface. |
| 1.3.6.1.4.1.33.10.14.2.1.9 | ColumnipRouterIfForwardsIn | read-only | mandatory | The number of IP packets received on this interface that were forwarded. |
| 1.3.6.1.4.1.33.10.14.2.1.10 | ColumnipRouterIfForwardsOut | read-only | mandatory | The number of IP packets sent on this interface that were forwarded. |
| 1.3.6.1.4.1.33.10.14.3 | NodexIpTraffic | |||
| 1.3.6.1.4.1.33.10.14.3.1 | ScalaripTrafficSort | read-write | mandatory | Setting to 'execute' causes the most recent traffic information to be sorted into the ipTrafficTable. The sorting precedence is: decreasing percentage, increas… |
| 1.3.6.1.4.1.33.10.14.3.2 | TableipTrafficTable | not-accessible | mandatory | A list of traffic entries, sorted in the order specified by ipTrafficSort. |
| 1.3.6.1.4.1.33.10.14.3.2.1 | RowipTrafficEntry | not-accessible | mandatory | A traffic entry. |
| 1.3.6.1.4.1.33.10.14.3.2.1.1 | ColumnipTrafficIndex | read-only | mandatory | Identification of this traffic entry. |
| 1.3.6.1.4.1.33.10.14.3.2.1.2 | ColumnipTrafficPercent | read-only | mandatory | The percentage of total traffic that this traffic entry represents, in tenths of a percent. |
| 1.3.6.1.4.1.33.10.14.3.2.1.3 | ColumnipTrafficDstAddr | read-only | mandatory | The destination IP address of the traffic entry. |
| 1.3.6.1.4.1.33.10.14.3.2.1.4 | ColumnipTrafficSrcAddr | read-only | mandatory | The source IP address of the traffic entry. |
| 1.3.6.1.4.1.33.10.14.3.2.1.5 | ColumnipTrafficProtocol | read-only | mandatory | The IP protocol type of the traffic entry. |
| 1.3.6.1.4.1.33.10.14.3.2.1.6 | ColumnipTrafficDstPort | read-only | mandatory | The destination TCP/UDP port of the traffic entry. |
| 1.3.6.1.4.1.33.10.14.3.2.1.7 | ColumnipTrafficSrcPort | read-only | mandatory | The source TCP/UDP port of the traffic entry. |
| 1.3.6.1.4.1.33.10.14.3.2.1.8 | ColumnipTrafficIf | read-only | mandatory | The inbound interface to which the traffic entry applies. This value is the same as IfIndex. |
| 1.3.6.1.4.1.33.10.14.3.3 | ScalaripTrafficMonitoring | read-write | mandatory | Control for whether the router side of the Router Discovery Protocol is running on this interface. |
| 1.3.6.1.4.1.33.10.14.4 | TablexIpNetToMediaTable | not-accessible | mandatory | iTouch extensions to the IP Address Translation Table. |
| 1.3.6.1.4.1.33.10.14.4.1 | RowxIpNetToMediaEntry | not-accessible | mandatory | Entry parameters. |
| 1.3.6.1.4.1.33.10.14.4.1.1 | ColumnxIpNetToMediaCircuit | read-write | mandatory | An additional identifier for the circuit (i.e. Frame Relay DLCI or X.25 VC) which the entry extends. |
| 1.3.6.1.4.1.33.10.14.4.1.2 | ColumnxIpNetToMediaReverseArp | read-write | mandatory | Whether reverse ARP is supported on this entry. |
| 1.3.6.1.4.1.33.10.15 | NodexRouterUdp | |||
| 1.3.6.1.4.1.33.10.15.1 | TableudpBcstServerTable | not-accessible | mandatory | Table of servers to whom UDP broadcast messages will be forwarded. |
| 1.3.6.1.4.1.33.10.15.1.1 | RowudpBcstServerEntry | not-accessible | mandatory | A particular entry. |
| 1.3.6.1.4.1.33.10.15.1.1.1 | ColumnudpBcstServerAddress | read-only | mandatory | Internet address of the server. |
| 1.3.6.1.4.1.33.10.15.1.1.2 | ColumnudpBcstServerStatus | read-write | mandatory | The status of the server. Set to 'invalid' to remove the entry. |
| 1.3.6.1.4.1.33.10.15.2 | TableudpBcstPortTable | not-accessible | mandatory | Table of incoming UDP destination port numbers for which UDP broadcasts will be forwarded. |
| 1.3.6.1.4.1.33.10.15.2.1 | RowudpBcstPortEntry | not-accessible | mandatory | A particular entry. |
| 1.3.6.1.4.1.33.10.15.2.1.1 | ColumnudpBcstPort | read-only | mandatory | The incoming destination UDP port number. |
| 1.3.6.1.4.1.33.10.15.2.1.2 | ColumnudpBcstPortStatus | read-write | mandatory | The status of broadcast forwarding for the port. Set to 'invalid' to remove the entry. |
| 1.3.6.1.4.1.33.10.15.3 | ScalarudpBcstRouting | read-write | mandatory | The indication of whether this entity forwards UDP broadcasts. |
| 1.3.6.1.4.1.33.10.16 | NodexRouterPolicy | |||
| 1.3.6.1.4.1.33.10.16.1 | NodexImport | |||
| 1.3.6.1.4.1.33.10.16.1.1 | TableimpEgpRuleTable | not-accessible | mandatory | The EGP import table. |
| 1.3.6.1.4.1.33.10.16.1.1.1 | RowimpEgpRuleEntry | not-accessible | mandatory | An EGP import rule. Each rule is keyed by the Autonomous System of the EGP neighbor and the IP network of the route learned from the neighbor. The AS can be se… |
| 1.3.6.1.4.1.33.10.16.1.1.1.1 | ColumnimpEgpRuleAs | read-only | mandatory | The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number. |
| 1.3.6.1.4.1.33.10.16.1.1.1.2 | ColumnimpEgpRuleNetwork | read-only | mandatory | The IP network learned from the neighbor. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.1.1.1.3 | ColumnimpEgpRuleAction | read-write | mandatory | Control whether the route is learned or discarded. |
| 1.3.6.1.4.1.33.10.16.1.1.1.4 | ColumnimpEgpRulePreference | read-write | mandatory | Preference to be stored with the route. The lower preference is preferred. |
| 1.3.6.1.4.1.33.10.16.1.1.1.5 | ColumnimpEgpRuleType | read-write | mandatory | Type to be stored with the route. The type is based on the OSPF external type and used to help compare metrics. Type 1 is preferred over type 2. |
| 1.3.6.1.4.1.33.10.16.1.1.1.6 | ColumnimpEgpRuleMetricAction | read-write | mandatory | How to apply the impEgpRuleMetric field to the metric learned with the route before storing it in the routing table. |
| 1.3.6.1.4.1.33.10.16.1.1.1.7 | ColumnimpEgpRuleMetric | read-write | mandatory | Metric value to be applied to the metric learned learned with the route before storing it in the routing table. |
| 1.3.6.1.4.1.33.10.16.1.1.1.8 | ColumnimpEgpRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.1.2 | TableimpOspfRuleTable | not-accessible | mandatory | The OSPF import table. |
| 1.3.6.1.4.1.33.10.16.1.2.1 | RowimpOspfRuleEntry | not-accessible | mandatory | An OSPF import rule. Each rule is keyed by the IP network of the route and the AS from which it was learned. The Ip network and the AS can both be set to a wil… |
| 1.3.6.1.4.1.33.10.16.1.2.1.1 | ColumnimpOspfRuleNetwork | read-only | mandatory | The IP network of the route. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.1.2.1.2 | ColumnimpOspfRulePreference | read-write | mandatory | Preference to be stored with the route. The lower preference is preferred. |
| 1.3.6.1.4.1.33.10.16.1.2.1.3 | ColumnimpOspfRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.1.3 | TableimpRipRuleTable | not-accessible | mandatory | The RIP import table. |
| 1.3.6.1.4.1.33.10.16.1.3.1 | RowimpRipRuleEntry | not-accessible | mandatory | A RIP import rule. Each rule is keyed by the interface and the IP network of the route learned from the neighbor. The route is either accepted or discarded and… |
| 1.3.6.1.4.1.33.10.16.1.3.1.1 | ColumnimpRipRuleFromIf | read-only | mandatory | The interface index of the interface where the rule applies, same as ifIndex. |
| 1.3.6.1.4.1.33.10.16.1.3.1.2 | ColumnimpRipRuleNetwork | read-only | mandatory | The IP network learned from the neighbor. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.1.3.1.3 | ColumnimpRipRuleAction | read-write | mandatory | Control whether the route is learned or discarded. |
| 1.3.6.1.4.1.33.10.16.1.3.1.4 | ColumnimpRipRulePreference | read-write | mandatory | Preference to be stored with the route. The lower preference are preferred. |
| 1.3.6.1.4.1.33.10.16.1.3.1.5 | ColumnimpRipRuleType | read-write | mandatory | Type to be stored with the route. The type is based on the OSPF external type and used to help compare metrics. Type 1 is preferred over type 2. |
| 1.3.6.1.4.1.33.10.16.1.3.1.6 | ColumnimpRipRuleMetricAction | read-write | mandatory | How to apply the impRipRuleMetric field to the metric learned with the route before storing it in the routing table. |
| 1.3.6.1.4.1.33.10.16.1.3.1.7 | ColumnimpRipRuleMetric | read-write | mandatory | Metric value to be applied to the metric learned learned with the route before storing it in the routing table. |
| 1.3.6.1.4.1.33.10.16.1.3.1.8 | ColumnimpRipRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.1.4 | TableimpIsisRuleTable | not-accessible | mandatory | The Isis import table. |
| 1.3.6.1.4.1.33.10.16.1.4.1 | RowimpIsisRuleEntry | not-accessible | mandatory | An Isis import rule. Each rule is keyed by the IP network of the route learned from the neighbor. The route is either accepted or discarded and its metrics are… |
| 1.3.6.1.4.1.33.10.16.1.4.1.1 | ColumnimpIsisRuleNetwork | read-only | mandatory | The IP network learned from the neighbor. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.1.4.1.2 | ColumnimpIsisRuleAction | read-write | mandatory | Control whether the route is learned or discarded. |
| 1.3.6.1.4.1.33.10.16.1.4.1.3 | ColumnimpIsisRulePreference | read-write | mandatory | Preference to be stored with the route. The lower preference are preferred. |
| 1.3.6.1.4.1.33.10.16.1.4.1.4 | ColumnimpIsisRuleType | read-write | mandatory | Type to be stored with the route. The type is based on the OSPF external type and used to help compare metrics. Type 1 is preferred over type 2. |
| 1.3.6.1.4.1.33.10.16.1.4.1.5 | ColumnimpIsisRuleMetricAction | read-write | mandatory | How to apply the impIsisRuleMetric field to the metric learned with the route before storing it in the routing table. |
| 1.3.6.1.4.1.33.10.16.1.4.1.6 | ColumnimpIsisRuleMetric | read-write | mandatory | Metric value to be applied to the metric learned learned with the route before storing it in the routing table. |
| 1.3.6.1.4.1.33.10.16.1.4.1.7 | ColumnimpIsisRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2 | NodexExport | |||
| 1.3.6.1.4.1.33.10.16.2.1 | TableexpEgpToEgpRuleTable | not-accessible | mandatory | The EGP to EGP export table. |
| 1.3.6.1.4.1.33.10.16.2.1.1 | RowexpEgpToEgpRuleEntry | not-accessible | mandatory | An EGP to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor, the IP network of the EGP route in the routing table, and the Auton… |
| 1.3.6.1.4.1.33.10.16.2.1.1.1 | ColumnexpEgpToEgpRuleToAs | read-only | mandatory | The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number. |
| 1.3.6.1.4.1.33.10.16.2.1.1.2 | ColumnexpEgpToEgpRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.1.1.3 | ColumnexpEgpToEgpRuleFromAs | read-only | mandatory | The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number. |
| 1.3.6.1.4.1.33.10.16.2.1.1.4 | ColumnexpEgpToEgpRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.1.1.5 | ColumnexpEgpToEgpRuleMetricAction | read-write | mandatory | How to apply the expEgpToEgpRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.1.1.6 | ColumnexpEgpToEgpRuleMetric | read-write | mandatory | Metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.1.1.7 | ColumnexpEgpToEgpRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.2 | TableexpOspfToEgpRuleTable | not-accessible | mandatory | The OSPF to EGP export table. |
| 1.3.6.1.4.1.33.10.16.2.2.1 | RowexpOspfToEgpRuleEntry | not-accessible | mandatory | An OSPF to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor, the IP network of the OSPF route in the routing table, and the Aut… |
| 1.3.6.1.4.1.33.10.16.2.2.1.1 | ColumnexpOspfToEgpRuleToAs | read-only | mandatory | The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number. |
| 1.3.6.1.4.1.33.10.16.2.2.1.2 | ColumnexpOspfToEgpRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.2.1.3 | ColumnexpOspfToEgpRuleFromAs | read-only | mandatory | The Autonomous System of the route in the route table. Local indicates that the route was not an external OSPF route. The value 65535 is a wild card matching a… |
| 1.3.6.1.4.1.33.10.16.2.2.1.4 | ColumnexpOspfToEgpRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.2.1.5 | ColumnexpOspfToEgpRuleMetricAction | read-write | mandatory | How to apply the expOspfToEgpRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.2.1.6 | ColumnexpOspfToEgpRuleMetric | read-write | mandatory | Metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.2.1.7 | ColumnexpOspfToEgpRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.3 | TableexpStaticToEgpRuleTable | not-accessible | mandatory | The Static to EGP export table. |
| 1.3.6.1.4.1.33.10.16.2.3.1 | RowexpStaticToEgpRuleEntry | not-accessible | mandatory | An Static to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor and the IP network of the Static route in the routing table. The … |
| 1.3.6.1.4.1.33.10.16.2.3.1.1 | ColumnexpStaticToEgpRuleToAs | read-only | mandatory | The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number. |
| 1.3.6.1.4.1.33.10.16.2.3.1.2 | ColumnexpStaticToEgpRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.3.1.3 | ColumnexpStaticToEgpRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.3.1.4 | ColumnexpStaticToEgpRuleMetricAction | read-write | mandatory | How to apply the expStaticToEgpRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.3.1.5 | ColumnexpStaticToEgpRuleMetric | read-write | mandatory | Metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.3.1.6 | ColumnexpStaticToEgpRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.4 | TableexpEgpToOspfRuleTable | not-accessible | mandatory | The EGP to OSPF export table. |
| 1.3.6.1.4.1.33.10.16.2.4.1 | RowexpEgpToOspfRuleEntry | not-accessible | mandatory | An EGP to OSPF export rule. Each rule is keyed by the IP network of the EGP route in the routing table, and the Autonomous System from which the route was lear… |
| 1.3.6.1.4.1.33.10.16.2.4.1.1 | ColumnexpEgpToOspfRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.4.1.2 | ColumnexpEgpToOspfRuleFromAs | read-only | mandatory | The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number. |
| 1.3.6.1.4.1.33.10.16.2.4.1.3 | ColumnexpEgpToOspfRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.4.1.4 | ColumnexpEgpToOspfRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.5 | TableexpRipToEgpRuleTable | not-accessible | mandatory | The Rip to EGP export table. |
| 1.3.6.1.4.1.33.10.16.2.5.1 | RowexpRipToEgpRuleEntry | not-accessible | mandatory | An Rip to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor and the IP network of the Rip route in the routing table. The neighb… |
| 1.3.6.1.4.1.33.10.16.2.5.1.1 | ColumnexpRipToEgpRuleToAs | read-only | mandatory | The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number. |
| 1.3.6.1.4.1.33.10.16.2.5.1.2 | ColumnexpRipToEgpRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.5.1.3 | ColumnexpRipToEgpRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.5.1.4 | ColumnexpRipToEgpRuleMetricAction | read-write | mandatory | How to apply the expRipToEgpRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.5.1.5 | ColumnexpRipToEgpRuleMetric | read-write | mandatory | Metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.5.1.6 | ColumnexpRipToEgpRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.6 | TableexpRipToOspfRuleTable | not-accessible | mandatory | The RIP to OSPF export table. |
| 1.3.6.1.4.1.33.10.16.2.6.1 | RowexpRipToOspfRuleEntry | not-accessible | mandatory | A RIP to OSPF export rule. Each rule is keyed by the IP network of the RIP route in the routing table. The IP network can be set to a wild card. The route is e… |
| 1.3.6.1.4.1.33.10.16.2.6.1.1 | ColumnexpRipToOspfRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.6.1.2 | ColumnexpRipToOspfRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.6.1.3 | ColumnexpRipToOspfRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.7 | TableexpEgpToRipRuleTable | not-accessible | mandatory | The EGP to RIP export table. |
| 1.3.6.1.4.1.33.10.16.2.7.1 | RowexpEgpToRipRuleEntry | not-accessible | mandatory | An EGP to RIP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor, the IP network of the EGP route in the routing table, and the Auton… |
| 1.3.6.1.4.1.33.10.16.2.7.1.1 | ColumnexpEgpToRipRuleToIf | read-only | mandatory | The IP address of the RIP interface to which the rule applies. |
| 1.3.6.1.4.1.33.10.16.2.7.1.2 | ColumnexpEgpToRipRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.7.1.3 | ColumnexpEgpToRipRuleFromAs | read-only | mandatory | The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number. |
| 1.3.6.1.4.1.33.10.16.2.7.1.4 | ColumnexpEgpToRipRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.7.1.5 | ColumnexpEgpToRipRuleMetricAction | read-write | mandatory | How to apply the expEgpToRipRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.7.1.6 | ColumnexpEgpToRipRuleMetric | read-write | mandatory | Metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.7.1.7 | ColumnexpEgpToRipRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.8 | TableexpOspfToRipRuleTable | not-accessible | mandatory | The OSPF to RIP export table. |
| 1.3.6.1.4.1.33.10.16.2.8.1 | RowexpOspfToRipRuleEntry | not-accessible | mandatory | An Ospf to RIP export rule. Each rule is keyed by the Autonomous System of the Ospf neighbor, the IP network of the Ospf route in the routing table, and the Au… |
| 1.3.6.1.4.1.33.10.16.2.8.1.1 | ColumnexpOspfToRipRuleToIf | read-only | mandatory | The IP address of the RIP interface to which the rule applies. |
| 1.3.6.1.4.1.33.10.16.2.8.1.2 | ColumnexpOspfToRipRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.8.1.3 | ColumnexpOspfToRipRuleFromAs | read-only | mandatory | The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number, and the value 65534 is for routes within the loca… |
| 1.3.6.1.4.1.33.10.16.2.8.1.4 | ColumnexpOspfToRipRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.8.1.5 | ColumnexpOspfToRipRuleMetricAction | read-write | mandatory | How to apply the expOspfToRipRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.8.1.6 | ColumnexpOspfToRipRuleMetric | read-write | mandatory | Metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.8.1.7 | ColumnexpOspfToRipRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. The same is… |
| 1.3.6.1.4.1.33.10.16.2.9 | TableexpRipToRipRuleTable | not-accessible | mandatory | The Rip to Rip export table. |
| 1.3.6.1.4.1.33.10.16.2.9.1 | RowexpRipToRipRuleEntry | not-accessible | mandatory | An Rip to Rip export rule. Each rule is keyed by the IP network of the Rip route in the routing table. The neighbor IP network can be set to a wild card. The r… |
| 1.3.6.1.4.1.33.10.16.2.9.1.1 | ColumnexpRipToRipRuleToIf | read-only | mandatory | The IP address of the RIP interface to which the rule applies. |
| 1.3.6.1.4.1.33.10.16.2.9.1.2 | ColumnexpRipToRipRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.9.1.3 | ColumnexpRipToRipRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.9.1.4 | ColumnexpRipToRipRuleMetricAction | read-write | mandatory | How to apply the expRipToRipRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.9.1.5 | ColumnexpRipToRipRuleMetric | read-write | mandatory | Metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.9.1.6 | ColumnexpRipToRipRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.10 | TableexpStaticToRipRuleTable | not-accessible | mandatory | The Static to Rip export table. |
| 1.3.6.1.4.1.33.10.16.2.10.1 | RowexpStaticToRipRuleEntry | not-accessible | mandatory | An Static to Rip export rule. Each rule is keyed by the IP network of the Static route in the routing table. The neighbor IP network can be set to a wild card.… |
| 1.3.6.1.4.1.33.10.16.2.10.1.1 | ColumnexpStaticToRipRuleToIf | read-only | mandatory | The IP address of the RIP interface to which the rule applies. |
| 1.3.6.1.4.1.33.10.16.2.10.1.2 | ColumnexpStaticToRipRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.10.1.3 | ColumnexpStaticToRipRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.10.1.4 | ColumnexpStaticToRipRuleMetricAction | read-write | mandatory | How to apply the expStaticToRipRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.10.1.5 | ColumnexpStaticToRipRuleMetric | read-write | mandatory | Metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.10.1.6 | ColumnexpStaticToRipRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.11 | TableexpIsisToEgpRuleTable | not-accessible | mandatory | The Isis to EGP export table. |
| 1.3.6.1.4.1.33.10.16.2.11.1 | RowexpIsisToEgpRuleEntry | not-accessible | mandatory | An Isis to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor and the IP network of the Isis route in the routing table. The neig… |
| 1.3.6.1.4.1.33.10.16.2.11.1.1 | ColumnexpIsisToEgpRuleToAs | read-only | mandatory | The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number. |
| 1.3.6.1.4.1.33.10.16.2.11.1.2 | ColumnexpIsisToEgpRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.11.1.3 | ColumnexpIsisToEgpRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.11.1.4 | ColumnexpIsisToEgpRuleMetricAction | read-write | mandatory | How to apply the expIsisToEgpRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.11.1.5 | ColumnexpIsisToEgpRuleMetric | read-write | mandatory | Metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.11.1.6 | ColumnexpIsisToEgpRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.12 | TableexpIsisToOspfRuleTable | not-accessible | mandatory | The Isis to Ospf export table. |
| 1.3.6.1.4.1.33.10.16.2.12.1 | RowexpIsisToOspfRuleEntry | not-accessible | mandatory | An Isis to Ospf export rule. Each rule is keyed by the IP network of the Isis route in the routing table. The IP network can be set to a wild card. The route i… |
| 1.3.6.1.4.1.33.10.16.2.12.1.1 | ColumnexpIsisToOspfRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.12.1.2 | ColumnexpIsisToOspfRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.12.1.3 | ColumnexpIsisToOspfRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.13 | TableexpIsisToRipRuleTable | not-accessible | mandatory | The Isis to Rip export table. |
| 1.3.6.1.4.1.33.10.16.2.13.1 | RowexpIsisToRipRuleEntry | not-accessible | mandatory | An Isis to Rip export rule. Each rule is keyed by the IP network of the Isis route in the routing table. The IP network can be set to a wild card. The route is… |
| 1.3.6.1.4.1.33.10.16.2.13.1.1 | ColumnexpIsisToRipRuleToIf | read-only | mandatory | The IP address of the RIP interface to which the rule applies. |
| 1.3.6.1.4.1.33.10.16.2.13.1.2 | ColumnexpIsisToRipRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.13.1.3 | ColumnexpIsisToRipRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.13.1.4 | ColumnexpIsisToRipRuleMetricAction | read-write | mandatory | How to apply the expIsisToRipRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.13.1.5 | ColumnexpIsisToRipRuleMetric | read-write | mandatory | Metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.13.1.6 | ColumnexpIsisToRipRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.14 | TableexpEgpToIsisRuleTable | not-accessible | mandatory | The EGP to Isis export table. |
| 1.3.6.1.4.1.33.10.16.2.14.1 | RowexpEgpToIsisRuleEntry | not-accessible | mandatory | An EGP to Isis export rule. Each rule is keyed by the Autonomous System of the EGP neighbor, the IP network of the EGP route in the routing table, and the Auto… |
| 1.3.6.1.4.1.33.10.16.2.14.1.1 | ColumnexpEgpToIsisRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.14.1.2 | ColumnexpEgpToIsisRuleFromAs | read-only | mandatory | The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number. |
| 1.3.6.1.4.1.33.10.16.2.14.1.3 | ColumnexpEgpToIsisRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.14.1.4 | ColumnexpEgpToIsisRuleMetricType | read-write | mandatory | Whether to advertise the metric as Internal or External. |
| 1.3.6.1.4.1.33.10.16.2.14.1.5 | ColumnexpEgpToIsisRuleDefaultMetricAction | read-write | mandatory | How to apply the expEgpToIsisDefaultRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.14.1.6 | ColumnexpEgpToIsisRuleDefaultMetric | read-write | mandatory | Default metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.14.1.7 | ColumnexpEgpToIsisRuleDelayMetricAction | read-write | mandatory | How to apply the expEgpToIsisDelayRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.14.1.8 | ColumnexpEgpToIsisRuleDelayMetric | read-write | mandatory | Delay metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.14.1.9 | ColumnexpEgpToIsisRuleErrorMetricAction | read-write | mandatory | How to apply the expEgpToIsisErrorRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.14.1.10 | ColumnexpEgpToIsisRuleErrorMetric | read-write | mandatory | Error metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.14.1.11 | ColumnexpEgpToIsisRuleExpenseMetricAction | read-write | mandatory | How to apply the expEgpToIsisExpenseRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.14.1.12 | ColumnexpEgpToIsisRuleExpenseMetric | read-write | mandatory | Expense metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.14.1.13 | ColumnexpEgpToIsisRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.15 | TableexpOspfToIsisRuleTable | not-accessible | mandatory | The Ospf to Isis export table. |
| 1.3.6.1.4.1.33.10.16.2.15.1 | RowexpOspfToIsisRuleEntry | not-accessible | mandatory | An Ospf to Isis export rule. Each rule is keyed by the Autonomous System of the Ospf neighbor, the IP network of the Ospf route in the routing table, and the A… |
| 1.3.6.1.4.1.33.10.16.2.15.1.1 | ColumnexpOspfToIsisRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.15.1.2 | ColumnexpOspfToIsisRuleFromAs | read-only | mandatory | The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number, and the value 65534 is for routes within the loca… |
| 1.3.6.1.4.1.33.10.16.2.15.1.3 | ColumnexpOspfToIsisRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.15.1.4 | ColumnexpOspfToIsisRuleMetricType | read-write | mandatory | Whether to advertise the metric as Internal or External. |
| 1.3.6.1.4.1.33.10.16.2.15.1.5 | ColumnexpOspfToIsisRuleDefaultMetricAction | read-write | mandatory | How to apply the expOspfToIsisDefaultRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.15.1.6 | ColumnexpOspfToIsisRuleDefaultMetric | read-write | mandatory | Default metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.15.1.7 | ColumnexpOspfToIsisRuleDelayMetricAction | read-write | mandatory | How to apply the expOspfToIsisDelayRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.15.1.8 | ColumnexpOspfToIsisRuleDelayMetric | read-write | mandatory | Delay metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.15.1.9 | ColumnexpOspfToIsisRuleErrorMetricAction | read-write | mandatory | How to apply the expOspfToIsisErrorRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.15.1.10 | ColumnexpOspfToIsisRuleErrorMetric | read-write | mandatory | Error metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.15.1.11 | ColumnexpOspfToIsisRuleExpenseMetricAction | read-write | mandatory | How to apply the expOspfToIsisExpenseRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.15.1.12 | ColumnexpOspfToIsisRuleExpenseMetric | read-write | mandatory | Expense metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.15.1.13 | ColumnexpOspfToIsisRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. The same is… |
| 1.3.6.1.4.1.33.10.16.2.16 | TableexpRipToIsisRuleTable | not-accessible | mandatory | The Isis to Isis export table. |
| 1.3.6.1.4.1.33.10.16.2.16.1 | RowexpRipToIsisRuleEntry | not-accessible | mandatory | An Isis to Isis export rule. Each rule is keyed by the IP network of the Isis route in the routing table. The neighbor IP network can be set to a wild card. Th… |
| 1.3.6.1.4.1.33.10.16.2.16.1.1 | ColumnexpRipToIsisRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.16.1.2 | ColumnexpRipToIsisRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.16.1.3 | ColumnexpRipToIsisRuleMetricType | read-write | mandatory | Whether to advertise the metric as Internal or External. |
| 1.3.6.1.4.1.33.10.16.2.16.1.4 | ColumnexpRipToIsisRuleDefaultMetricAction | read-write | mandatory | How to apply the expRipToIsisDefaultRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.16.1.5 | ColumnexpRipToIsisRuleDefaultMetric | read-write | mandatory | Default metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.16.1.6 | ColumnexpRipToIsisRuleDelayMetricAction | read-write | mandatory | How to apply the expRipToIsisDelayRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.16.1.7 | ColumnexpRipToIsisRuleDelayMetric | read-write | mandatory | Delay metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.16.1.8 | ColumnexpRipToIsisRuleErrorMetricAction | read-write | mandatory | How to apply the expRipToIsisErrorRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.16.1.9 | ColumnexpRipToIsisRuleErrorMetric | read-write | mandatory | Error metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.16.1.10 | ColumnexpRipToIsisRuleExpenseMetricAction | read-write | mandatory | How to apply the expRipToIsisExpenseRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.16.1.11 | ColumnexpRipToIsisRuleExpenseMetric | read-write | mandatory | Expense metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.16.1.12 | ColumnexpRipToIsisRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.17 | TableexpStaticToIsisRuleTable | not-accessible | mandatory | The Static to Isis export table. |
| 1.3.6.1.4.1.33.10.16.2.17.1 | RowexpStaticToIsisRuleEntry | not-accessible | mandatory | An Static to Isis export rule. Each rule is keyed by the IP network of the Static route in the routing table. The neighbor IP network can be set to a wild card… |
| 1.3.6.1.4.1.33.10.16.2.17.1.1 | ColumnexpStaticToIsisRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.17.1.2 | ColumnexpStaticToIsisRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.17.1.3 | ColumnexpStaticToIsisRuleMetricType | read-write | mandatory | Whether to advertise the metric as Internal or External. |
| 1.3.6.1.4.1.33.10.16.2.17.1.4 | ColumnexpStaticToIsisRuleDefaultMetricAction | read-write | mandatory | How to apply the expStaticToIsisDefaultRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.17.1.5 | ColumnexpStaticToIsisRuleDefaultMetric | read-write | mandatory | Default metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.17.1.6 | ColumnexpStaticToIsisRuleDelayMetricAction | read-write | mandatory | How to apply the expStaticToIsisDelayRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.17.1.7 | ColumnexpStaticToIsisRuleDelayMetric | read-write | mandatory | Delay metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.17.1.8 | ColumnexpStaticToIsisRuleErrorMetricAction | read-write | mandatory | How to apply the expStaticToIsisErrorRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.17.1.9 | ColumnexpStaticToIsisRuleErrorMetric | read-write | mandatory | Error metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.17.1.10 | ColumnexpStaticToIsisRuleExpenseMetricAction | read-write | mandatory | How to apply the expStaticToIsisExpenseRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.17.1.11 | ColumnexpStaticToIsisRuleExpenseMetric | read-write | mandatory | Expense metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.17.1.12 | ColumnexpStaticToIsisRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.3 | NodexFilter | |||
| 1.3.6.1.4.1.33.10.16.3.1 | TableipIfFilterTable | not-accessible | deprecated | Table of filter entries. |
| 1.3.6.1.4.1.33.10.16.3.1.1 | RowipIfFilterEntry | not-accessible | deprecated | A particular entry. |
| 1.3.6.1.4.1.33.10.16.3.1.1.1 | ColumnipIfFilterIndex | read-only | deprecated | The interface index with which this entry is associated. This value is the same as IfIndex. |
| 1.3.6.1.4.1.33.10.16.3.1.1.2 | ColumnipIfFilterDstAddr | read-only | deprecated | The destination IP address to use in the filter match. |
| 1.3.6.1.4.1.33.10.16.3.1.1.3 | ColumnipIfFilterDstMask | read-only | deprecated | The destination IP mask to use in the filter match. |
| 1.3.6.1.4.1.33.10.16.3.1.1.4 | ColumnipIfFilterSrcAddr | read-only | deprecated | The source IP address to use in the filter match. |
| 1.3.6.1.4.1.33.10.16.3.1.1.5 | ColumnipIfFilterSrcMask | read-only | deprecated | The source IP mask to use in the filter match. |
| 1.3.6.1.4.1.33.10.16.3.1.1.6 | ColumnipIfFilterProtocol | read-only | deprecated | The protocol to use in the filter match. The value 256 indicates any protocol. |
| 1.3.6.1.4.1.33.10.16.3.1.1.7 | ColumnipIfFilterDstPort | read-only | deprecated | The destination port to use in the filter match. This field only applies to TCP and UDP protocol packets. The value 65536 indicates any destination port. |
| 1.3.6.1.4.1.33.10.16.3.1.1.8 | ColumnipIfFilterSrcPort | read-only | deprecated | The source port to use in the filter match. This field only applies to TCP and UDP protocol packets. The value 65536 indicates any source port. |
| 1.3.6.1.4.1.33.10.16.3.1.1.9 | ColumnipIfFilterAction | read-write | deprecated | Control whether the packet for which this filter is the best match should be forwarded or discarded. |
| 1.3.6.1.4.1.33.10.16.3.1.1.10 | ColumnipIfFilterStatus | read-write | deprecated | The status of the filter entry. Set to 'invalid' to remove the entry. |
| 1.3.6.1.4.1.33.10.16.3.2 | ScalaripFilterState | read-write | mandatory | The indication of whether this system does IP filtering. |
| 1.3.6.1.4.1.33.10.16.3.3 | TableipIfFilter2Table | not-accessible | mandatory | Table of filter entries. |
| 1.3.6.1.4.1.33.10.16.3.3.1 | RowipIfFilter2Entry | not-accessible | mandatory | A particular entry. |
| 1.3.6.1.4.1.33.10.16.3.3.1.1 | ColumnipIfFilter2Index | read-only | mandatory | The interface index with which this entry is associated. This value is the same as IfIndex. |
| 1.3.6.1.4.1.33.10.16.3.3.1.2 | ColumnipIfFilter2DstAddr | read-only | mandatory | The destination IP address to use in the filter match. |
| 1.3.6.1.4.1.33.10.16.3.3.1.3 | ColumnipIfFilter2DstMask | read-only | mandatory | The destination IP mask to use in the filter match. |
| 1.3.6.1.4.1.33.10.16.3.3.1.4 | ColumnipIfFilter2SrcAddr | read-only | mandatory | The source IP address to use in the filter match. |
| 1.3.6.1.4.1.33.10.16.3.3.1.5 | ColumnipIfFilter2SrcMask | read-only | mandatory | The source IP mask to use in the filter match. |
| 1.3.6.1.4.1.33.10.16.3.3.1.6 | ColumnipIfFilter2Protocol | read-only | mandatory | The protocol to use in the filter match. The value 256 indicates any protocol. |
| 1.3.6.1.4.1.33.10.16.3.3.1.7 | ColumnipIfFilter2DstPortStart | read-only | mandatory | The starting destination port in a range of destination ports to use in the filter match. This field only applies to TCP and UDP protocol packets. |
| 1.3.6.1.4.1.33.10.16.3.3.1.8 | ColumnipIfFilter2SrcPortStart | read-only | mandatory | The starting source port in a range of source ports to use in the filter match. This field only applies to TCP and UDP protocol packets. |
| 1.3.6.1.4.1.33.10.16.3.3.1.9 | ColumnipIfFilter2Action | read-write | mandatory | Control whether the packet for which this filter is the best match should be forwarded or discarded. |
| 1.3.6.1.4.1.33.10.16.3.3.1.10 | ColumnipIfFilter2Status | read-write | mandatory | The status of the filter entry. Set to 'invalid' to remove the entry. |
| 1.3.6.1.4.1.33.10.16.3.3.1.11 | ColumnipIfFilter2DstPortEnd | read-only | mandatory | The ending destination port in a range of destination ports to use in the filter match. This field only applies to TCP and UDP protocol packets. This filed mus… |
| 1.3.6.1.4.1.33.10.16.3.3.1.12 | ColumnipIfFilter2SrcPortEnd | read-only | mandatory | The starting source port in a range of source ports to use in the filter match. This field only applies to TCP and UDP protocol packets. This filed must also b… |
| 1.3.6.1.4.1.33.10.16.3.3.1.13 | ColumnipIfFilter2TcpSyn | read-only | mandatory | The value of the TCP SYN and ACK bit to ues in the filter match. This field only applies to TCP packets. On indicates that the SYN bit is on and the ACK bit is… |
| 1.3.6.1.4.1.33.10.16.3.3.1.14 | ColumnipIfFilter2ProtocolPriority | read-write | mandatory | Control the priority at which the packet for which this filter is the best match should be placed on the WAN output queue. None indicates that the sending inte… |
| 1.3.6.1.4.1.33.10.18 | NodexRip | |||
| 1.3.6.1.4.1.33.10.18.1 | ScalarripState | read-write | mandatory | The indication of whether this system participates in RIP. |
| 1.3.6.1.4.1.33.10.18.2 | ScalarripStatus | read-only | mandatory | The status of the RIP software. |
| 1.3.6.1.4.1.33.10.18.3 | TableripNetTable | not-accessible | mandatory | Table of RIP entries. |
| 1.3.6.1.4.1.33.10.18.3.1 | RowripNetEntry | not-accessible | mandatory | A particular entry. |
| 1.3.6.1.4.1.33.10.18.3.1.1 | ColumnripNetNet | read-only | mandatory | The IP Network to which this entry applies. |
| 1.3.6.1.4.1.33.10.18.3.1.2 | ColumnripNetState | read-write | mandatory | This value controls the RIP protocol on this network. |
| 1.3.6.1.4.1.33.10.18.3.1.3 | ColumnripNetRipsIn | read-only | mandatory | The number of RIP packets received from routers on this IP network. |
| 1.3.6.1.4.1.33.10.18.3.1.4 | ColumnripNetRipsOut | read-only | mandatory | The number of RIP packets sent to routers on this IP network. |
| 1.3.6.1.4.1.33.10.18.3.1.5 | ColumnripNetAlgorithm | read-write | mandatory | This value controls the RIP algorithm on this network. |
| 1.3.6.1.4.1.33.10.19 | Nodexlpd | |||
| 1.3.6.1.4.1.33.10.19.1 | TablelpdQueueTable | not-accessible | mandatory | A list of lpd queues on the server. |
| 1.3.6.1.4.1.33.10.19.1.1 | RowlpdQueueEntry | not-accessible | mandatory | Lpd parameter values plus counters for an individual lpd queue. |
| 1.3.6.1.4.1.33.10.19.1.1.1 | ColumnlpdQueueStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry, corresponding directly to the CLEAR/PURGE SERVER LPD QUEUE command. Setting the val… |
| 1.3.6.1.4.1.33.10.19.1.1.2 | ColumnlpdQueueName | read-only | mandatory | Name of the LPD queue, case sensitive. |
| 1.3.6.1.4.1.33.10.19.1.1.3 | ColumnlpdQueuePorts | read-write | mandatory | List of ports assigned to the queue. An lpd queue can be associated with more than 1 port. This object corresponds to the port-list in the DEF/SET SERVER LPD Q… |
| 1.3.6.1.4.1.33.10.19.1.1.4 | ColumnlpdQueueEnabled | read-write | mandatory | Flag indicates if the queue is enabled. A 'disabled' queue will reject print requests from remote systems. A 'enabled' queue accepts requests for printing. |
| 1.3.6.1.4.1.33.10.19.1.1.5 | ColumnlpdQueueLfConversion | read-write | mandatory | Flag indicates if the queue is converting linefeeds to linefeeds, carriagereturns. 'lfcr' does the converion, 'lf' does not. |
| 1.3.6.1.4.1.33.10.19.1.1.6 | ColumnlpdQueueTotalJobs | read-only | mandatory | The total number of jobs on the queue. This number should be equal to the number of active and waiting jobs. (lpdQueueActive + lpdQueueWaiting) |
| 1.3.6.1.4.1.33.10.19.1.1.7 | ColumnlpdQueueActiveJobs | read-only | mandatory | The number of active jobs on the queue. An active job is a job that has been assigned a port is in the process of receiving data from a remote host and sending… |
| 1.3.6.1.4.1.33.10.19.1.1.8 | ColumnlpdQueueWaitingJobs | read-only | mandatory | The number of waiting jobs on the queue. A waiting job is a job that needs a port to send its data to. This implies that the ports associated with this queue a… |
| 1.3.6.1.4.1.33.10.19.1.1.9 | ColumnlpdQueueProcessedJobs | read-only | mandatory | The total number of jobs processed by this queue since server boot. |
| 1.3.6.1.4.1.33.10.19.1.1.10 | ColumnlpdQueueFormFeed | read-write | mandatory | A control to determine how we will send out a formfeed when printing a lpd job. formfeedafter: Send after job, formfeedbefore: Send before job, formfeednone: S… |
| 1.3.6.1.4.1.33.10.19.1.1.11 | ColumnlpdQueueBypass | read-write | mandatory | Control for a queue to bypass a LPD port which has output inhibited via flow control. Corresponds directly to the value labeled 'Bypass' in the SERVER LPD QUEU… |
| 1.3.6.1.4.1.33.10.19.2 | TablelpdJobTable | not-accessible | mandatory | A list of lpd jobs. |
| 1.3.6.1.4.1.33.10.19.2.1 | RowlpdJobEntry | not-accessible | mandatory | A single lpd Job. |
| 1.3.6.1.4.1.33.10.19.2.1.1 | ColumnlpdJobStatus | read-write | mandatory | Status of this entry. Setting this object to 'invalid' will remove the job from the queue. Setting this object ot 'valid' has no effect since the only way to c… |
| 1.3.6.1.4.1.33.10.19.2.1.2 | ColumnlpdJobNumber | read-only | mandatory | The queue relative job number for this lpd job. Job numbers are assigned as jobs are accepted onto the queue. Job numbers are reset to 1 when they reach a valu… |
| 1.3.6.1.4.1.33.10.19.2.1.3 | ColumnlpdJobAssignedPort | read-only | mandatory | The number of the port assigned to the lpd job. |
| 1.3.6.1.4.1.33.10.19.2.1.4 | ColumnlpdJobFileSize | read-only | mandatory | The size of the file being sent from the remote system. |
| 1.3.6.1.4.1.33.10.19.2.1.5 | ColumnlpdJobHostName | read-only | mandatory | The name of the host sending the job. |
| 1.3.6.1.4.1.33.10.19.2.1.6 | ColumnlpdJobFileName | read-only | mandatory | The name of the file being sent. |
| 1.3.6.1.4.1.33.10.19.2.1.7 | ColumnlpdJobState | read-only | mandatory | The current state of the lpd job. A typical job transistions through the following states: initialize->waiting->assigned->printingdata-> printingcontrol->compl… |
| 1.3.6.1.4.1.33.10.20 | NodexSecurID | |||
| 1.3.6.1.4.1.33.10.20.1 | ScalarsecurIDServerName0 | read-write | mandatory | The Domain name of the first SecurID server to try when the system verifies a SecurID PASSCODE. Corresponds directly to SERVER SECURID SERVER0 and the value la… |
| 1.3.6.1.4.1.33.10.20.2 | ScalarsecurIDServerName1 | read-write | mandatory | The Domain name of the second SecurID server to try when the system verifies a SecurID PASSCODE. Corresponds directly to SERVER SECURID SERVER1 and the value l… |
| 1.3.6.1.4.1.33.10.20.3 | ScalarsecurIDServerName2 | read-write | mandatory | The Domain name of the third SecurID server to try when the system verifies a SecurID PASSCODE. Corresponds directly to SERVER SECURID SERVER2 and the value la… |
| 1.3.6.1.4.1.33.10.20.4 | ScalarsecurIDServerName3 | read-write | mandatory | The Domain name of the fourth SecurID server to try when the system verifies a SecurID PASSCODE. Corresponds directly to SERVER SECURID SERVER3 and the value l… |
| 1.3.6.1.4.1.33.10.20.5 | ScalarsecurIDServerName4 | read-write | mandatory | The Domain name of the fifth SecurID server to try when the system verifies a SecurID PASSCODE. Corresponds directly to SERVER SECURID SERVER4 and the value la… |
| 1.3.6.1.4.1.33.10.20.6 | ScalarsecurIDMaxRetries | read-write | mandatory | The maximum number of times the server will try any single SecurID server to validate a PASSCODE. Corresponds directly to SERVER SECURID ACMMAXRETRIES and the … |
| 1.3.6.1.4.1.33.10.20.7 | ScalarsecurIDBaseTimeout | read-write | mandatory | The initial timeout value to be used between prompts for a SecurID PASSCODE. Corresponds directly to SERVER SECURID ACMBASETIMEOUT and the value labeled 'Secur… |
| 1.3.6.1.4.1.33.10.20.8 | ScalarsecurIDPort | read-write | mandatory | The UDP port number to be used when communicating with the SecurID servers. Corresponds directly to SERVER SECURID ACM_PORT and the value labeled 'SecurID ACM_… |
| 1.3.6.1.4.1.33.10.20.9 | ScalarsecurIDQueryLimit | read-write | mandatory | The maximum number of times a user will be queried for a SecurID PASSCODE before being logged out. Corresponds directly to SERVER SECURID QUERY LIMIT and the v… |
| 1.3.6.1.4.1.33.10.20.10 | ScalarsecurIDEncryptionMode | read-write | mandatory | The type of encryption to use in SecurID validation. Corresponds directly to the value labeled 'Encryption Mode' in the SERVER SECURID display. |
| 1.3.6.1.4.1.33.10.20.11 | ScalarsecurIDInsecureLogins | read-only | mandatory | The number of user logins on ports for which SecurID user verification is not enabled. Corresponds directly to the value labeled 'Logins without SecurID:' in t… |
| 1.3.6.1.4.1.33.10.20.12 | ScalarsecurIDSecureLogins | read-only | mandatory | The number of successful user logins on ports for which SecurID user verification is enabled. Corresponds directly to the value labeled 'Successful Logins:' in… |
| 1.3.6.1.4.1.33.10.20.13 | ScalarsecurIDSecureLoginsFailed | read-only | mandatory | The number of verification failures due to incorrect PASSCODE for attempted user logins on ports for which SecurID user verification is enabled. Corresponds di… |
| 1.3.6.1.4.1.33.10.20.14 | ScalarsecurIDServerAccess0 | read-only | mandatory | The number of times the system successfully accessed the SecurID server0. Corresponds directly to the value labeled 'Attempts to access:', 'Server0', and 'Succ… |
| 1.3.6.1.4.1.33.10.20.15 | ScalarsecurIDServerAccessFailed0 | read-only | mandatory | The number of times the system unsuccessfully accessed the SecurID server0. Corresponds directly to the value labeled 'Attempts to access:', 'Server0', and 'Un… |
| 1.3.6.1.4.1.33.10.20.16 | ScalarsecurIDServerAccess1 | read-only | mandatory | The number of times the system successfully accessed the SecurID server1. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', and 'Succ… |
| 1.3.6.1.4.1.33.10.20.17 | ScalarsecurIDServerAccessFailed1 | read-only | mandatory | The number of times the system unsuccessfully accessed the SecurID server1. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', and 'Un… |
| 1.3.6.1.4.1.33.10.20.18 | ScalarsecurIDServerAccess2 | read-only | mandatory | The number of times the system successfully accessed the SecurID server2. Corresponds directly to the value labeled 'Attempts to access:', 'Server2', and 'Succ… |
| 1.3.6.1.4.1.33.10.20.19 | ScalarsecurIDServerAccessFailed2 | read-only | mandatory | The number of times the system unsuccessfully accessed the SecurID server2. Corresponds directly to the value labeled 'Attempts to access:', 'Server2', and 'Un… |
| 1.3.6.1.4.1.33.10.20.20 | ScalarsecurIDServerAccess3 | read-only | mandatory | The number of times the system successfully accessed the SecurID server3. Corresponds directly to the value labeled 'Attempts to access:', 'Server3', and 'Succ… |
| 1.3.6.1.4.1.33.10.20.21 | ScalarsecurIDServerAccessFailed3 | read-only | mandatory | The number of times the system unsuccessfully accessed the SecurID server3. Corresponds directly to the value labeled 'Attempts to access:', 'Server3', and 'Un… |
| 1.3.6.1.4.1.33.10.20.22 | ScalarsecurIDServerAccess4 | read-only | mandatory | The number of times the system successfully accessed the SecurID server4. Corresponds directly to the value labeled 'Attempts to access:', 'Server4', and 'Succ… |
| 1.3.6.1.4.1.33.10.20.23 | ScalarsecurIDServerAccessFailed4 | read-only | mandatory | The number of times the system unsuccessfully accessed the SecurID server4. Corresponds directly to the value labeled 'Attempts to access:', 'Server4', and 'Un… |
| 1.3.6.1.4.1.33.10.20.24 | ScalarsecurIDErrorPortIndex | read-only | mandatory | The index of the most recent port on which a SecurID access violation occurred. Corresponds directly to the value labeled 'Last Unsuccessful Login:' in the SER… |
| 1.3.6.1.4.1.33.10.20.25 | ScalarsecurIDError | read-only | mandatory | The error number of the most recent SecurID-related error. Corresponds directly to the value labeled 'Reason:' in the SERVER SECURID display. See iTouch docume… |
| 1.3.6.1.4.1.33.10.20.26 | ScalarsecurIDErrorUsername | read-only | mandatory | The username associated with the most recent SecurID-related error. Corresponds directly to the value labeled 'Username:' in the SERVER SECURID display. |
| 1.3.6.1.4.1.33.10.20.27 | TablesecurIDPortTable | not-accessible | mandatory | A list of SecurID character port entries. |
| 1.3.6.1.4.1.33.10.20.27.1 | RowsecurIDPortEntry | not-accessible | mandatory | Parameter values for a SecurID port. |
| 1.3.6.1.4.1.33.10.20.27.1.1 | ColumnsecurIDPortIndex | read-only | mandatory | An index value that uniquely identifies a port could relate to SecurID. The port identified by a particular value of this index is the same port as identified … |
| 1.3.6.1.4.1.33.10.20.27.1.2 | ColumnsecurIDPortStatus | read-write | mandatory | A control indicating the level of SecurID operation on the port. Corresponds directly to PORT SECURID and the value 'SecurID' following the label 'Enabled Char… |
| 1.3.6.1.4.1.33.10.23 | NodexSsh | |||
| 1.3.6.1.4.1.33.10.23.1 | TablesshPortTable | not-accessible | mandatory | A list of SSH port entries |
| 1.3.6.1.4.1.33.10.23.1.1 | RowsshPortEntry | not-accessible | mandatory | Parameter values for an SSH port. |
| 1.3.6.1.4.1.33.10.23.1.1.1 | ColumnsshPortIndex | read-only | mandatory | An index value that uniquely identifies an SSH port. The port identified by a particular value of this index is the same port as identified by charPortIndex in… |
| 1.3.6.1.4.1.33.10.23.1.1.2 | ColumnsshPortIncomingTcpPort | read-write | mandatory | Specifies the TCP port number used to identify the port when a SSH connection request arrives at the server. The default for a physical port is 2022 + 100 * po… |
| 1.3.6.1.4.1.33.10.23.1.1.3 | ColumnsshPortNewlineFiltering | read-write | mandatory | Translation to apply to newline sequences (CR/NULL or CR/LF) received from the network during a SSH session, before sending the newline to the character port. … |
| 1.3.6.1.4.1.33.10.23.1.1.4 | ColumnsshPortNewline | read-write | mandatory | Translation to apply to newline (carriage return) received from the character port during an SSH session, before sending the newline to the remote partner. Cor… |
| 1.3.6.1.4.1.33.10.23.1.1.5 | ColumnsshPortTransmitBufferedTime | read-write | mandatory | Number of milliseconds to wait before transmitting data received from a character port during an interactive SSH session. Corresponds directly to the value lab… |
| 1.3.6.1.4.1.33.10.23.1.1.6 | ColumnsshPortRemoteProtocol | read-write | mandatory | Indicates which remote protocols will be accepted at this port. Corresponds indirectly to the presence of 'Telnet' or 'SSH' under the label 'Enabled Characteri… |
| 1.3.6.1.4.1.33.10.23.2 | ScalarsshCipherMask | read-write | mandatory | This is a list of the encryption methods supported. The OCTET STRING contains a bitmap, with one bit for each cipher type. Corresponding bit numbers start with… |
| 1.3.6.1.4.1.33.10.23.3 | ScalarsshAuthenticationTimeout | read-write | mandatory | The timeout in minutes before disconnecting if no successful authentication of SSH parties has been made. Corresponds directly to the value labeled 'Authentica… |
| 1.3.6.1.4.1.33.10.23.4 | ScalarsshHostKeyLength | read-write | mandatory | The bit length of the SSH host encryption key. When modified, the desired change does not occur until the next system initialization. Corresponds directly to t… |
| 1.3.6.1.4.1.33.10.23.5 | ScalarsshHostKeyGenerate | read-write | mandatory | For a set-request with a value of generate or update, a new host key will be generated in the background. When modified with generate, the desired change does … |
| 1.3.6.1.4.1.33.10.23.6 | ScalarsshServerKeyLength | read-write | mandatory | The bit length of the SSH server encryption key. The difference between the server and host key lengths should be greater than 128 bits. Corresponds directly t… |
| 1.3.6.1.4.1.33.10.23.7 | ScalarsshServerKeyTtl | read-write | mandatory | The time in minutes that the server key remains valid. After this time the server key is automatically re-generated. Corresponds directly to the value labeled … |
| 1.3.6.1.4.1.33.10.23.8 | ScalarsshServerMaxBufferSize | read-write | mandatory | The size of the four buffers used by SSH for input and output. These buffers are used for data coming from the console, going to the network, coming from the n… |
| 1.3.6.1.4.1.33.11 | NodexEthernet | |||
| 1.3.6.1.4.1.33.11.1 | TableetherTable | not-accessible | mandatory | A list of generic entries. |
| 1.3.6.1.4.1.33.11.1.1 | RowetherEntry | not-accessible | mandatory | Generic status and parameter values for an Ethernet interface. |
| 1.3.6.1.4.1.33.11.1.1.1 | ColumnetherIndex | read-only | mandatory | An index value that uniquely identifies an Ethernet interface. The interface identified by a particular value of this index is the same interface as identified… |
| 1.3.6.1.4.1.33.11.1.1.2 | ColumnetherAlignmentErrors | read-only | mandatory | A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. |
| 1.3.6.1.4.1.33.11.1.1.3 | ColumnetherFCSErrors | read-only | mandatory | A count of frames received on a particular interface that are an integral number of octets in length that do not pass the FCS check. |
| 1.3.6.1.4.1.33.11.2 | TableetherTxTable | not-accessible | mandatory | A list of Ethernet transmit entries. |
| 1.3.6.1.4.1.33.11.2.1 | RowetherTxEntry | not-accessible | mandatory | Transmit status and parameter values for an Ethernet interface. |
| 1.3.6.1.4.1.33.11.2.1.1 | ColumnetherTxIndex | read-only | mandatory | An index value that uniquely identifies an Ethernet interface. The interface identified by a particular value of this index is the same interface as identified… |
| 1.3.6.1.4.1.33.11.2.1.2 | ColumnetherTxSingleCollisionFrames | read-only | mandatory | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision. A frame that is counted by a… |
| 1.3.6.1.4.1.33.11.2.1.3 | ColumnetherTxMultipleCollisionFrames | read-only | mandatory | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by… |
| 1.3.6.1.4.1.33.11.3 | TableetherMulticastTable | not-accessible | mandatory | A list of etherMulticast entries. |
| 1.3.6.1.4.1.33.11.3.1 | RowetherMulticastEntry | not-accessible | mandatory | EtherMulticast status and parameter values for an Ethernet interface. |
| 1.3.6.1.4.1.33.11.3.1.1 | ColumnetherMulticastIndex | read-only | mandatory | An index value that uniquely identifies an Ethernet interface. The interface identified by a particular value of this index is the same interface as identified… |
| 1.3.6.1.4.1.33.11.3.1.2 | ColumnetherMulticastBytesIn | read-only | mandatory | A count of frames successfully received on a particular interface and for which the destination address multicast bit was set. Bytes that are counted by an ins… |
| 1.3.6.1.4.1.33.11.3.1.3 | ColumnetherMulticastBytesOut | read-only | mandatory | A count of successfully frames successfully transmitted on a particular interface and for which the destination address multicast bit was set. Bytes that are c… |
| 1.3.6.1.4.1.33.11.4 | TableetherXTxTable | not-accessible | mandatory | A list of Ethernet extended transmit entries. |
| 1.3.6.1.4.1.33.11.4.1 | RowetherXTxEntry | not-accessible | mandatory | Extended transmit status and parameter values for an Ethernet interface. |
| 1.3.6.1.4.1.33.11.4.1.1 | ColumnetherXTxIndex | read-only | mandatory | An index value that uniquely identifies an Ethernet interface. The interface identified by a particular value of this index is the same interface as identified… |
| 1.3.6.1.4.1.33.11.4.1.2 | ColumnetherXTxExcessiveCollisions | read-only | mandatory | A count of frames for which transmission on a particular interface fails due to excessive collisions. |
| 1.3.6.1.4.1.33.14 | NodexDecnet | |||
| 1.3.6.1.4.1.33.14.1 | NodexRcp | |||
| 1.3.6.1.4.1.33.14.1.1 | ScalarrcpRemoteAddress | read-only | mandatory | If a remote console session exists, the Ethernet address of the remote partner, otherwise zero length. |
| 1.3.6.1.4.1.33.14.2 | NodexPhiv | |||
| 1.3.6.1.4.1.33.14.2.1 | NodexPhivRoute | |||
| 1.3.6.1.4.1.33.14.2.1.1 | ScalarphivPathSelection | read-write | mandatory | The algorithm used to balance traffic between equal next hop paths. 'roundRobin' selects the next hop using a round robin algorithm for each hop. 'samePath' se… |
| 1.3.6.1.4.1.33.14.2.1.2 | ScalarphivMaxPaths | read-write | mandatory | The maximum number of equal cost next hops that the router can remember and successfully load balance between. |
| 1.3.6.1.4.1.33.14.2.1.3 | ScalarphivStatus | read-only | mandatory | The status of the DECnet routing software. |
| 1.3.6.1.4.1.33.14.2.2 | NodexPhivCircuit | |||
| 1.3.6.1.4.1.33.14.2.2.1 | TablephivCircuitTable | not-accessible | mandatory | A list of DECnet circuit entries. |
| 1.3.6.1.4.1.33.14.2.2.1.1 | RowphivCircuitEntry | not-accessible | mandatory | Parameter values for a DECnet circuit. |
| 1.3.6.1.4.1.33.14.2.2.1.1.1 | ColumnxPhivCircuitIndex | read-only | mandatory | Identification of a circuit entry. Same as an interface index (ifIndex). |
| 1.3.6.1.4.1.33.14.2.2.1.1.2 | ColumnphivCircuitRoutingTimer | read-write | mandatory | The maximum time in seconds allowed between Routing updates on the circuit. Different values for LANs vs. WANs. |
| 1.3.6.1.4.1.33.14.2.2.1.1.3 | ColumnphivCircuitOperCost | read-only | mandatory | The actual cost associated with the circuit. |
| 1.3.6.1.4.1.33.14.2.2.1.1.4 | ColumnphivCircuitErrors | read-only | mandatory | The number of routed DECnet packets received in error on this circuit. |
| 1.3.6.1.4.1.33.14.2.2.1.1.5 | ColumnphivCircuitLastError | read-only | mandatory | The error of the last routed DECnet packet received in error on this circuit. |
| 1.3.6.1.4.1.33.14.2.2.1.1.6 | ColumnphivCircuitLastErrorTime | read-only | mandatory | The date and time that the last routed DECnet packet was received in error on this circuit. |
| 1.3.6.1.4.1.33.14.2.2.1.1.7 | ColumnphivCircuitLastErrorData | read-only | mandatory | The first 22 bytes of the last routed DECnet packet received in error on this circuit. |
| 1.3.6.1.4.1.33.14.2.2.1.1.8 | ColumnphivCircuitProtocolPriority | read-write | mandatory | The priority at which all DECnet routed packets will be placed on the WAN output queue. |
| 1.3.6.1.4.1.33.14.2.2.1.1.9 | ColumnphivCircuitRoutingPriority | read-write | mandatory | Router's priority to be designated router on this circuit. |
| 1.3.6.1.4.1.33.14.2.3 | NodexPhivImport | |||
| 1.3.6.1.4.1.33.14.2.3.1 | TablephivCircuitImportTable | not-accessible | mandatory | A list of circuit import filter entries. |
| 1.3.6.1.4.1.33.14.2.3.1.1 | RowphivCircuitImportEntry | not-accessible | mandatory | Parameter values for an import filter. |
| 1.3.6.1.4.1.33.14.2.3.1.1.1 | ColumnphivCircuitImportIf | read-only | mandatory | The interface associated with the import routing filter. |
| 1.3.6.1.4.1.33.14.2.3.1.1.2 | ColumnphivCircuitImportAddr | read-only | mandatory | The address (node or area) to match against learned route entries to decide whether to import the entry to the routing database. |
| 1.3.6.1.4.1.33.14.2.3.1.1.3 | ColumnphivCircuitImportMask | read-only | mandatory | The mask which is ANDed with the address field as well as the route entries address to determine whether the address matches the route entry. |
| 1.3.6.1.4.1.33.14.2.3.1.1.4 | ColumnphivCircuitImportAction | read-write | mandatory | The action to take if the address field along with the mask field matches the route entry. |
| 1.3.6.1.4.1.33.14.2.3.1.1.5 | ColumnphivCircuitImportStatus | read-write | mandatory | Setting to 'invalid' removes this import filter from the table. Setting to 'valid' has no effect. |
| 1.3.6.1.4.1.33.14.2.4 | NodexPhivImportArea | |||
| 1.3.6.1.4.1.33.14.2.4.1 | TablephivCircuitImportAreaTable | not-accessible | mandatory | A list of circuit import area filter entries. |
| 1.3.6.1.4.1.33.14.2.4.1.1 | RowphivCircuitImportAreaEntry | not-accessible | mandatory | Parameter values for an import area filter. |
| 1.3.6.1.4.1.33.14.2.4.1.1.1 | ColumnphivCircuitImportAreaIf | read-only | mandatory | The interface associated with the import area routing filter. |
| 1.3.6.1.4.1.33.14.2.4.1.1.2 | ColumnphivCircuitImportAreaAddr | read-only | mandatory | The address (node or area) to match against learned route entries to decide whether to import the entry to the routing database. |
| 1.3.6.1.4.1.33.14.2.4.1.1.3 | ColumnphivCircuitImportAreaMask | read-only | mandatory | The mask which is ANDed with the address field as well as the route entries address to determine whether the address matches the route entry. |
| 1.3.6.1.4.1.33.14.2.4.1.1.4 | ColumnphivCircuitImportAreaAction | read-write | mandatory | The action to take if the address field along with the mask field matches the route entry. |
| 1.3.6.1.4.1.33.14.2.4.1.1.5 | ColumnphivCircuitImportAreaStatus | read-write | mandatory | Setting to 'invalid' removes this import area filter from the table. Setting to 'valid' has no effect. |
| 1.3.6.1.4.1.33.14.2.5 | NodexPhivExport | |||
| 1.3.6.1.4.1.33.14.2.5.1 | TablephivCircuitExportTable | not-accessible | mandatory | A list of circuit export filter entries. |
| 1.3.6.1.4.1.33.14.2.5.1.1 | RowphivCircuitExportEntry | not-accessible | mandatory | Parameter values for an export filter. |
| 1.3.6.1.4.1.33.14.2.5.1.1.1 | ColumnphivCircuitExportIf | read-only | mandatory | The interface associated with the export routing filter. |
| 1.3.6.1.4.1.33.14.2.5.1.1.2 | ColumnphivCircuitExportAddr | read-only | mandatory | The address (node or area) to match against learned route entries to decide whether to export the entry to the routing database. |
| 1.3.6.1.4.1.33.14.2.5.1.1.3 | ColumnphivCircuitExportMask | read-only | mandatory | The mask which is ANDed with the address field as well as the route entries address to determine whether the address matches the route entry. |
| 1.3.6.1.4.1.33.14.2.5.1.1.4 | ColumnphivCircuitExportAction | read-write | mandatory | The action to take if the address field along with the mask field matches the route entry. |
| 1.3.6.1.4.1.33.14.2.5.1.1.5 | ColumnphivCircuitExportStatus | read-write | mandatory | Setting to 'invalid' removes this export filter from the table. Setting to 'valid' has no effect. |
| 1.3.6.1.4.1.33.14.2.6 | NodexPhivExportArea | |||
| 1.3.6.1.4.1.33.14.2.6.1 | TablephivCircuitExportAreaTable | not-accessible | mandatory | A list of circuit export area filter entries. |
| 1.3.6.1.4.1.33.14.2.6.1.1 | RowphivCircuitExportAreaEntry | not-accessible | mandatory | Parameter values for an export area filter. |
| 1.3.6.1.4.1.33.14.2.6.1.1.1 | ColumnphivCircuitExportAreaIf | read-only | mandatory | The interface associated with the export area routing filter. |
| 1.3.6.1.4.1.33.14.2.6.1.1.2 | ColumnphivCircuitExportAreaAddr | read-only | mandatory | The address (node or area) to match against learned route entries to decide whether to export the entry to the routing database. |
| 1.3.6.1.4.1.33.14.2.6.1.1.3 | ColumnphivCircuitExportAreaMask | read-only | mandatory | The mask which is ANDed with the address field as well as the route entries address to determine whether the address matches the route entry. |
| 1.3.6.1.4.1.33.14.2.6.1.1.4 | ColumnphivCircuitExportAreaAction | read-write | mandatory | The action to take if the address field along with the mask field matches the route entry. |
| 1.3.6.1.4.1.33.14.2.6.1.1.5 | ColumnphivCircuitExportAreaStatus | read-write | mandatory | Setting to 'invalid' removes this export area filter from the table. Setting to 'valid' has no effect. |
| 1.3.6.1.4.1.33.14.2.7 | NodexPhivFilter | |||
| 1.3.6.1.4.1.33.14.2.7.1 | TablephivCircuitFilterTable | not-accessible | mandatory | A list of circuit filter entries. |
| 1.3.6.1.4.1.33.14.2.7.1.1 | RowphivCircuitFilterEntry | not-accessible | mandatory | Parameter values for a filter. |
| 1.3.6.1.4.1.33.14.2.7.1.1.1 | ColumnphivCircuitFilterIf | read-only | mandatory | The interface associated with the filter entry. |
| 1.3.6.1.4.1.33.14.2.7.1.1.2 | ColumnphivCircuitFilterDstAddr | read-only | mandatory | The address (node or area) to match against the destination address of the packet to decide whether to forward the packet. |
| 1.3.6.1.4.1.33.14.2.7.1.1.3 | ColumnphivCircuitFilterDstMask | read-only | mandatory | The mask which is ANDed with the destination address field and the packet's destination address to determine whether the address matches the packet's address. |
| 1.3.6.1.4.1.33.14.2.7.1.1.4 | ColumnphivCircuitFilterSrcAddr | read-only | mandatory | The address (node or area) to match against the source address of the packet to decide whether to forward the packet. |
| 1.3.6.1.4.1.33.14.2.7.1.1.5 | ColumnphivCircuitFilterSrcMask | read-only | mandatory | The mask which is ANDed with the source address field and the packet's source address to determine whether the address matches the packet's address. |
| 1.3.6.1.4.1.33.14.2.7.1.1.6 | ColumnphivCircuitFilterAction | read-write | mandatory | The action to take if the address fields along with the mask fields match the packet. |
| 1.3.6.1.4.1.33.14.2.7.1.1.7 | ColumnphivCircuitFilterStatus | read-write | mandatory | Setting to 'invalid' removes this Filter filter from the table. Setting to 'valid' has no effect. |
| 1.3.6.1.4.1.33.14.2.8 | NodexPhivTraffic | |||
| 1.3.6.1.4.1.33.14.2.8.1 | ScalarphivTrafficSort | read-write | mandatory | Setting to 'execute' causes the most recent traffic information to be sorted into the phivTrafficTable. The sorting precedence is: decreasing percentage, incre… |
| 1.3.6.1.4.1.33.14.2.8.2 | TablephivTrafficTable | not-accessible | mandatory | A list of traffic entries, sorted in the order specified by phivTrafficSort. |
| 1.3.6.1.4.1.33.14.2.8.2.1 | RowphivTrafficEntry | not-accessible | mandatory | A traffic entry. |
| 1.3.6.1.4.1.33.14.2.8.2.1.1 | ColumnphivTrafficIndex | read-only | mandatory | Identification of this traffic entry. |
| 1.3.6.1.4.1.33.14.2.8.2.1.2 | ColumnphivTrafficPercent | read-only | mandatory | The percentage of total traffic that this traffic entry represents, in tenths of a percent. |
| 1.3.6.1.4.1.33.14.2.8.2.1.3 | ColumnphivTrafficDst | read-only | mandatory | The destination to which the traffic entry applies. |
| 1.3.6.1.4.1.33.14.2.8.2.1.4 | ColumnphivTrafficSrc | read-only | mandatory | The source to which the traffic entry applies. |
| 1.3.6.1.4.1.33.14.2.8.2.1.5 | ColumnphivTrafficIf | read-only | mandatory | The inbound interface to which the traffic entry applies. This value is the same as IfIndex. |
| 1.3.6.1.4.1.33.15 | NodexIpx | |||
| 1.3.6.1.4.1.33.15.1 | NodexIpxSystem | |||
| 1.3.6.1.4.1.33.15.1.1 | ScalaripxRouting | read-write | mandatory | Control for IPX routing services. |
| 1.3.6.1.4.1.33.15.1.2 | ScalaripxInternalNetwork | read-write | mandatory | The IPX Internal Network to use on the the IPX Router. |
| 1.3.6.1.4.1.33.15.2 | NodexIpxIf | |||
| 1.3.6.1.4.1.33.15.2.1 | TableipxIfTable | not-accessible | mandatory | A list of IPX interface entries. |
| 1.3.6.1.4.1.33.15.2.1.1 | RowipxIfEntry | not-accessible | mandatory | IPX interface parameters and counters. |
| 1.3.6.1.4.1.33.15.2.1.1.1 | ColumnipxIfIndex | read-only | mandatory | An index value that uniquely identifies an IPX interface. The interface identified by a particular value of this index is the same interface as identified by t… |
| 1.3.6.1.4.1.33.15.2.1.1.2 | ColumnipxIfState | read-write | mandatory | Control for IPX routing services for this interface. |
| 1.3.6.1.4.1.33.15.2.1.1.3 | ColumnipxIfNetwork | read-write | mandatory | The IPX network number of the network to which this interface is attached. |
| 1.3.6.1.4.1.33.15.2.1.1.4 | ColumnipxIfFrameStyle | read-write | mandatory | Control for the CSMA/CD frame style to use on this interface. |
| 1.3.6.1.4.1.33.15.2.1.1.5 | ColumnipxIfFramesIn | read-only | mandatory | The number of IPX frames received on this interface. |
| 1.3.6.1.4.1.33.15.2.1.1.6 | ColumnipxIfFramesOut | read-only | mandatory | The number of IPX frames sent on this interface. |
| 1.3.6.1.4.1.33.15.2.1.1.7 | ColumnipxIfErrors | read-only | mandatory | The number of IPX errors seen on this interface. |
| 1.3.6.1.4.1.33.15.2.1.1.8 | ColumnipxIfTransitDelay | read-write | mandatory | The number of 55 millisecond ticks it takes for a packet to travel from one destination to another on the interface. A value of 0 means that the system will ca… |
| 1.3.6.1.4.1.33.15.2.1.1.9 | ColumnipxIfTransitDelayActual | read-only | mandatory | The number of 55 millisecond ticks it takes for a packet to travel from one destination to another on the interface. |
| 1.3.6.1.4.1.33.15.2.1.1.10 | ColumnipxIfProtocolPriority | read-write | mandatory | This value defines the priority at which all Internet Routed packets will be placed on the WAN output queue. |
| 1.3.6.1.4.1.33.15.2.1.1.11 | ColumnipxIfWatchdogSpoof | read-write | mandatory | Control for whether or not this router responds to IPX watchog requests on this interface. |
| 1.3.6.1.4.1.33.15.2.1.1.12 | ColumnipxIfStatusNetwork | read-only | mandatory | The IPX network number that is actually in use on the attached interface. This value may have been learned via listening to the attached network. |
| 1.3.6.1.4.1.33.15.3 | NodexIpxNetbios | |||
| 1.3.6.1.4.1.33.15.3.1 | ScalaripxNetbiosHopLimit | read-write | mandatory | Maximum number of hops that an IPX Netbios packet may make. |
| 1.3.6.1.4.1.33.15.3.2 | TableipxNetbiosIfTable | not-accessible | mandatory | A list of IPX interface entries. |
| 1.3.6.1.4.1.33.15.3.2.1 | RowipxNetbiosIfEntry | not-accessible | mandatory | IPX interface parameters and counters. |
| 1.3.6.1.4.1.33.15.3.2.1.1 | ColumnipxNetbiosIfIndex | read-only | mandatory | An index value that uniquely identifies an IPX interface. The interface identified by a particular value of this index is the same interface as identified by t… |
| 1.3.6.1.4.1.33.15.3.2.1.2 | ColumnipxIfNetbiosForwarding | read-write | mandatory | Control whether Netbios packet will be forwarded in or out on this interface. |
| 1.3.6.1.4.1.33.15.3.2.1.3 | ColumnipxIfNetbiosIn | read-only | mandatory | The number of IPX Netbios frames received on this interface. |
| 1.3.6.1.4.1.33.15.3.2.1.4 | ColumnipxIfNetbiosOut | read-only | mandatory | The number of IPX Netbios frames sent on this interface. |
| 1.3.6.1.4.1.33.15.4 | NodexIpxRip | |||
| 1.3.6.1.4.1.33.15.4.1 | TableipxRipIfTable | not-accessible | mandatory | A list of IPX interface entries. |
| 1.3.6.1.4.1.33.15.4.1.1 | RowipxRipIfEntry | not-accessible | mandatory | IPX interface parameters and counters. |
| 1.3.6.1.4.1.33.15.4.1.1.1 | ColumnipxRipIfIndex | read-only | mandatory | An index value that uniquely identifies an IPX interface. The interface identified by a particular value of this index is the same interface as identified by t… |
| 1.3.6.1.4.1.33.15.4.1.1.2 | ColumnipxIfRipBcst | read-write | mandatory | Control whether RIP packets will be broadcasted out this interface. |
| 1.3.6.1.4.1.33.15.4.1.1.3 | ColumnipxIfRipBcstDiscardTimeout | read-write | mandatory | The number of seconds to wait before discarding information learned from a RIP broadcast. |
| 1.3.6.1.4.1.33.15.4.1.1.4 | ColumnipxIfRipBcstTimer | read-write | mandatory | The number of seconds to wait between sending out RIP broadcasts. |
| 1.3.6.1.4.1.33.15.4.1.1.5 | ColumnipxIfRipIn | read-only | mandatory | The number of RIP broadcasts received on this interface. |
| 1.3.6.1.4.1.33.15.4.1.1.6 | ColumnipxIfRipOut | read-only | mandatory | The number of RIP broadcasts sent on this interface. |
| 1.3.6.1.4.1.33.15.4.1.1.7 | ColumnipxIfRipAgedOut | read-only | mandatory | The number of entries timed out and discarded on this interface. |
| 1.3.6.1.4.1.33.15.4.2 | TableipxRipTable | not-accessible | mandatory | A list of RIP entries. |
| 1.3.6.1.4.1.33.15.4.2.1 | RowipxRipEntry | not-accessible | mandatory | IPX interface parameters and counters. |
| 1.3.6.1.4.1.33.15.4.2.1.1 | ColumnipxRipNetwork | read-only | mandatory | An IPX network number to which this router knows a path. |
| 1.3.6.1.4.1.33.15.4.2.1.2 | ColumnipxRipRouter | read-only | mandatory | The Ethernet address of an IPX router on this network. |
| 1.3.6.1.4.1.33.15.4.2.1.3 | ColumnipxRipInterface | read-only | mandatory | The interface to reach the router. A value of ifIndex. |
| 1.3.6.1.4.1.33.15.4.2.1.4 | ColumnipxRipHops | read-only | mandatory | The number of hops to reach the router. |
| 1.3.6.1.4.1.33.15.4.2.1.5 | ColumnipxRipTransTime | read-only | mandatory | The number of 55 millisecond ticks it takes for a packet to travel to the router. |
| 1.3.6.1.4.1.33.15.4.2.1.6 | ColumnipxRipAge | read-only | mandatory | The age of the RIP entry in seconds. |
| 1.3.6.1.4.1.33.15.4.3 | TableipxRipRtTable | not-accessible | mandatory | A list of RIP Routing entries. |
| 1.3.6.1.4.1.33.15.4.3.1 | RowipxRipRtEntry | not-accessible | mandatory | IPX Routing Entry information |
| 1.3.6.1.4.1.33.15.4.3.1.1 | ColumnipxRipRtNetwork | read-only | mandatory | An IPX network number to which this router knows a path. |
| 1.3.6.1.4.1.33.15.4.3.1.2 | ColumnipxRipRtRouter | read-only | mandatory | The Ethernet address of an IPX router on this network. |
| 1.3.6.1.4.1.33.15.4.3.1.3 | ColumnipxRipRtInterface | read-only | mandatory | The interface to reach the router. A value of ifIndex. |
| 1.3.6.1.4.1.33.15.4.3.1.4 | ColumnipxRipRtHops | read-write | mandatory | The number of hops to reach the router. |
| 1.3.6.1.4.1.33.15.4.3.1.5 | ColumnipxRipRtTransTime | read-write | mandatory | The number of 55 millisecond ticks it takes for a packet to travel to the router. |
| 1.3.6.1.4.1.33.15.4.3.1.6 | ColumnipxRipRtOrigin | read-only | mandatory | The source of the RIP entry, either Learned via RIP or Static. |
| 1.3.6.1.4.1.33.15.4.3.1.7 | ColumnipxRipRtRowStatus | read-write | mandatory | Create or Delete RIP routing table entries. |
| 1.3.6.1.4.1.33.15.5 | NodexIpxSap | |||
| 1.3.6.1.4.1.33.15.5.1 | TableipxSapIfTable | not-accessible | mandatory | A list of IPX interface entries. |
| 1.3.6.1.4.1.33.15.5.1.1 | RowipxSapIfEntry | not-accessible | mandatory | IPX interface parameters and counters. |
| 1.3.6.1.4.1.33.15.5.1.1.1 | ColumnipxSapIfIndex | read-only | mandatory | An index value that uniquely identifies an IPX interface. The interface identified by a particular value of this index is the same interface as identified by t… |
| 1.3.6.1.4.1.33.15.5.1.1.2 | ColumnipxIfSapBcst | read-write | mandatory | Control whether SAP packets will be broadcasted out this interface. |
| 1.3.6.1.4.1.33.15.5.1.1.3 | ColumnipxIfSapBcstDiscardTimeout | read-write | mandatory | The number of seconds to wait before discarding information learned from a SAP broadcast. |
| 1.3.6.1.4.1.33.15.5.1.1.4 | ColumnipxIfSapBcstTimer | read-write | mandatory | The number of seconds to wait between sending out SAP broadcasts. |
| 1.3.6.1.4.1.33.15.5.1.1.5 | ColumnipxIfSapIn | read-only | mandatory | The number SAP broadcasts received on this interface. |
| 1.3.6.1.4.1.33.15.5.1.1.6 | ColumnipxIfSapOut | read-only | mandatory | The number SAP broadcasts sent on this interface. |
| 1.3.6.1.4.1.33.15.5.1.1.7 | ColumnipxIfSapAgedOut | read-only | mandatory | The number entries for this interface discarded due to aging timeout. |
| 1.3.6.1.4.1.33.15.5.2 | TableipxSapTable | not-accessible | mandatory | A list of SAP entries. |
| 1.3.6.1.4.1.33.15.5.2.1 | RowipxSapEntry | not-accessible | mandatory | IPX interface parameters and counters. |
| 1.3.6.1.4.1.33.15.5.2.1.1 | ColumnipxSapName | read-only | mandatory | The name of the service, null filled. |
| 1.3.6.1.4.1.33.15.5.2.1.2 | ColumnipxSapNetwork | read-only | mandatory | The IPX network number on which the service's host resides. |
| 1.3.6.1.4.1.33.15.5.2.1.3 | ColumnipxSapHost | read-only | mandatory | The Ethernet address of the IPX host of the service. |
| 1.3.6.1.4.1.33.15.5.2.1.4 | ColumnipxSapSocket | read-only | mandatory | The socket number of the service on the host. |
| 1.3.6.1.4.1.33.15.5.2.1.5 | ColumnipxSapInterface | read-only | mandatory | The interface of the router in the direction of the service. A value of ifIndex. |
| 1.3.6.1.4.1.33.15.5.2.1.6 | ColumnipxSapType | read-only | mandatory | The type of the service. The enumeration is an incomplete set of all possible values. |
| 1.3.6.1.4.1.33.15.5.2.1.7 | ColumnipxSapAge | read-only | mandatory | The age of the Sap entry in seconds. |
| 1.3.6.1.4.1.33.15.5.3 | TableipxSapSvTable | not-accessible | mandatory | A list of SAP entries. |
| 1.3.6.1.4.1.33.15.5.3.1 | RowipxSapSvEntry | not-accessible | mandatory | IPX interface parameters and counters. |
| 1.3.6.1.4.1.33.15.5.3.1.1 | ColumnipxSapSvName | read-only | mandatory | The name of the service. |
| 1.3.6.1.4.1.33.15.5.3.1.2 | ColumnipxSapSvNetwork | read-only | mandatory | The IPX network number on which the service's host resides. |
| 1.3.6.1.4.1.33.15.5.3.1.3 | ColumnipxSapSvHost | read-only | mandatory | The Ethernet address of the IPX host of the service. |
| 1.3.6.1.4.1.33.15.5.3.1.4 | ColumnipxSapSvSocket | read-only | mandatory | The socket number of the service on the host. |
| 1.3.6.1.4.1.33.15.5.3.1.5 | ColumnipxSapSvInterface | read-only | mandatory | The interface of the router in the direction of the service. A value of ifIndex. |
| 1.3.6.1.4.1.33.15.5.3.1.6 | ColumnipxSapSvOrigin | read-only | mandatory | The source of the RIP entry, either Learned via RIP or Static. |
| 1.3.6.1.4.1.33.15.5.3.1.7 | ColumnipxSapSvType | read-only | mandatory | The type of the service. The enumeration is an incomplete set of all possible values. |
| 1.3.6.1.4.1.33.15.5.3.1.8 | ColumnipxSapSvHops | read-write | mandatory | The number of hops to the Service. |
| 1.3.6.1.4.1.33.15.5.3.1.9 | ColumnipxSapSvRowStatus | read-write | mandatory | Create or Delete SAP Service table entries. |
| 1.3.6.1.4.1.33.15.5.3.1.10 | ColumnipxSapSvAge | read-only | mandatory | The age of the Sap entry in seconds. |
| 1.3.6.1.4.1.33.15.6 | NodexIpxFilter | |||
| 1.3.6.1.4.1.33.15.6.1 | TableipxIfFilterTable | not-accessible | mandatory | A list of IPX interface Source and Destination address Filter entries. |
| 1.3.6.1.4.1.33.15.6.1.1 | RowipxIfFilterEntry | not-accessible | mandatory | IPX Source and Destination interface Filters. |
| 1.3.6.1.4.1.33.15.6.1.1.1 | ColumnipxIfFilterIndex | read-only | mandatory | The interface to which this IPX Address filter applies. A value of ifIndex. |
| 1.3.6.1.4.1.33.15.6.1.1.2 | ColumnipxIfFilterDestNetwork | read-only | mandatory | The destination IPX network to be filtered. |
| 1.3.6.1.4.1.33.15.6.1.1.3 | ColumnipxIfFilterDestNode | read-only | mandatory | The destination IPX node to be filtered. |
| 1.3.6.1.4.1.33.15.6.1.1.4 | ColumnipxIfFilterSourceNetwork | read-only | mandatory | The destination IPX network to be filtered. |
| 1.3.6.1.4.1.33.15.6.1.1.5 | ColumnipxIfFilterSourceNode | read-only | mandatory | The destination IPX node to be filtered. |
| 1.3.6.1.4.1.33.15.6.1.1.6 | ColumnipxIfFilterPacketType | read-only | mandatory | The IPX packet type to be filtered. |
| 1.3.6.1.4.1.33.15.6.1.1.7 | ColumnipxIfFilterAction | read-write | mandatory | The IPX filter action to be taken, either Forward or Discard. |
| 1.3.6.1.4.1.33.15.6.1.1.8 | ColumnipxIfFilterRowStatus | read-write | mandatory | The IPX Filter create or delete function. |
| 1.3.6.1.4.1.33.15.6.1.1.9 | ColumnipxIfFilterStatusDestNetworkAll | read-only | mandatory | The IPX Filter flag meaning ALL destination networks. |
| 1.3.6.1.4.1.33.15.6.1.1.10 | ColumnipxIfFilterStatusDestNodeAll | read-only | mandatory | The IPX Filter flag meaning ALL destination nodes. |
| 1.3.6.1.4.1.33.15.6.1.1.11 | ColumnipxIfFilterStatusSourceNetworkAll | read-only | mandatory | The IPX Filter flag meaning ALL source networks. |
| 1.3.6.1.4.1.33.15.6.1.1.12 | ColumnipxIfFilterStatusSourceNodeAll | read-only | mandatory | The IPX Filter flag meaning ALL source nodes. |
| 1.3.6.1.4.1.33.15.6.1.1.13 | ColumnipxIfFilterStatusPacketTypeAll | read-only | mandatory | The IPX Filter flag meaning ALL packet types. |
| 1.3.6.1.4.1.33.15.6.2 | TableipxIfRipFilterTable | not-accessible | mandatory | A list of IPX interface RIP Filter entries. |
| 1.3.6.1.4.1.33.15.6.2.1 | RowipxIfRipFilterEntry | not-accessible | mandatory | IPX RIP interface Filters. |
| 1.3.6.1.4.1.33.15.6.2.1.1 | ColumnipxIfRipFilterNetwork | read-only | mandatory | The IPX RIP network to be filtered. |
| 1.3.6.1.4.1.33.15.6.2.1.2 | ColumnipxIfRipFilterType | read-only | mandatory | The IPX RIP filter type, either IMPORT or EXPORT. |
| 1.3.6.1.4.1.33.15.6.2.1.3 | ColumnipxIfRipFilterAction | read-write | mandatory | The IPX RIP filter action to be taken, either ALLOW or DENY. |
| 1.3.6.1.4.1.33.15.6.2.1.4 | ColumnipxIfRipFilterRowStatus | read-write | mandatory | The IPX RIP Filter create or delete function. |
| 1.3.6.1.4.1.33.15.6.2.1.5 | ColumnipxIfRipFilterNetworkAll | read-only | mandatory | The IPX RIP Filter flag meaning filter ALL networks. |
| 1.3.6.1.4.1.33.15.6.2.1.6 | ColumnipxIfRipFilterHost | read-only | mandatory | The RIP Filter IPX Host Address from which RIP will ALLOW/DENY IMPORT of routes. |
| 1.3.6.1.4.1.33.15.6.3 | TableipxIfSapFilterTable | not-accessible | mandatory | A list of IPX interface SAP Filter entries. |
| 1.3.6.1.4.1.33.15.6.3.1 | RowipxIfSapFilterEntry | not-accessible | mandatory | IPX SAP interface Filters. |
| 1.3.6.1.4.1.33.15.6.3.1.1 | ColumnipxIfSapFilterNetwork | read-only | mandatory | The IPX SAP network to be filtered. |
| 1.3.6.1.4.1.33.15.6.3.1.2 | ColumnipxIfSapFilterType | read-only | mandatory | The IPX SAP filter type, either IMPORT or EXPORT. |
| 1.3.6.1.4.1.33.15.6.3.1.3 | ColumnipxIfSapFilterServiceType | read-only | mandatory | The IPX SAP service type to which this filter applies. |
| 1.3.6.1.4.1.33.15.6.3.1.4 | ColumnipxIfSapFilterAction | read-write | mandatory | The IPX SAP filter action to be taken, either ALLOW or DENY. |
| 1.3.6.1.4.1.33.15.6.3.1.5 | ColumnipxIfSapFilterRowStatus | read-write | mandatory | The IPX SAP Filter create or delete function. |
| 1.3.6.1.4.1.33.15.6.3.1.6 | ColumnipxIfSapFilterNetworkAll | read-only | mandatory | The IPX SAP Filter flag meaning filter ALL networks. |
| 1.3.6.1.4.1.33.15.6.3.1.7 | ColumnipxIfSapFilterServiceTypeAll | read-only | mandatory | The IPX SAP Filter flag meaning filter ALL service types. |
| 1.3.6.1.4.1.33.15.6.3.1.8 | ColumnipxIfSapFilterName | read-only | mandatory | The name of the service to be filtered. |
| 1.3.6.1.4.1.33.15.6.3.1.9 | ColumnipxIfSapFilterHost | read-only | mandatory | The IPX Host address from which SAP will ALLOW/DENY IMPORT of services . |
| 1.3.6.1.4.1.33.15.8 | NodexIpxPrinter | |||
| 1.3.6.1.4.1.33.15.8.1 | TableipxPrinterPortTable | not-accessible | mandatory | A list of IPX printer character port entries. |
| 1.3.6.1.4.1.33.15.8.1.1 | RowipxPrinterPortEntry | not-accessible | mandatory | IPX printer parameter values for a character port. |
| 1.3.6.1.4.1.33.15.8.1.1.1 | ColumnipxPrinterPortIndex | read-only | mandatory | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the … |
| 1.3.6.1.4.1.33.15.8.1.1.2 | ColumnipxPrinterPortStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalida… |
| 1.3.6.1.4.1.33.15.8.1.1.3 | ColumnipxPrinterPortServer | read-write | mandatory | The name of an active print server on the network. |
| 1.3.6.1.4.1.33.15.8.1.1.4 | ColumnipxPrinterPortPrinter | read-write | mandatory | An available remote printer on ixpPrinterPortServer. |
| 1.3.6.1.4.1.33.15.8.1.1.5 | ColumnipxTimeout | read-write | mandatory | A control to set the the time at which a print job from a print server will be timed out and the port freed. |
| 1.3.6.1.4.1.33.15.8.2 | ScalaripxPrinterEthernet | read-write | mandatory | Control for use of Ethernet-style message framing, with the IPX protocol type. Mutually exclusive with ipxPrinterMac, ipxPrinterMac802_2_Snap, and ipxPrinterMa… |
| 1.3.6.1.4.1.33.15.8.3 | ScalaripxPrinterMac | read-write | mandatory | Control for use of MAC-only message framing, with no protocol type. Mutually exclusive with ipxPrinterEthernet, ipxPrinterMac802_2_Snap, and ipxPrinterMac802_2. |
| 1.3.6.1.4.1.33.15.8.4 | ScalaripxPrinterMac802-2 | read-write | mandatory | Control for use of MAC message framing with 802.2 framing. Mutually exclusive with ipxPrinterEthernet, ipxPrinterMac, and ipxPrinterMac802_2_Snap. |
| 1.3.6.1.4.1.33.15.8.5 | ScalaripxPrinterMac802-2-Snap | read-write | mandatory | Control for use of MAC-only message framing with 802 Snap framing. Mutually exclusive with ipxPrinterEthernet, ipxPrinterMac, and ipxPrinterMac802_2. |
| 1.3.6.1.4.1.33.16 | NodexChassis | |||
| 1.3.6.1.4.1.33.16.1 | NodexChassisBasic | |||
| 1.3.6.1.4.1.33.16.1.1 | ScalarbasicBase802Address | read-only | mandatory | Base IEEE 802 global address for the chassis. |
| 1.3.6.1.4.1.33.16.1.2 | ScalarbasicSlot | read-only | mandatory | Chassis slot number (slotIndex) of the system whose agent is supplying this MIB. |
| 1.3.6.1.4.1.33.16.1.3 | ScalarbasicSlotNumber | read-only | mandatory | Number of slots in the chassis. |
| 1.3.6.1.4.1.33.16.1.4 | ScalarbasicNewBase802Address | read-write | mandatory | New base IEEE 802 global address for the chassis. Must be set in conjunction with featType 'changeEthernetAddress' and featKey from the ITouch System MIB. |
| 1.3.6.1.4.1.33.16.2 | NodexSegment | |||
| 1.3.6.1.4.1.33.16.2.1 | TablesegmentTable | not-accessible | mandatory | A list of segment entries, one for each segment of each type on the chassis. |
| 1.3.6.1.4.1.33.16.2.1.1 | RowsegmentEntry | not-accessible | mandatory | Values for a chassis segment. |
| 1.3.6.1.4.1.33.16.2.1.1.1 | ColumnsegmentType | read-only | mandatory | The segment type. |
| 1.3.6.1.4.1.33.16.2.1.1.2 | ColumnsegmentIndex | read-only | mandatory | An index value that uniquely identifies a segment. |
| 1.3.6.1.4.1.33.16.3 | NodexPort | |||
| 1.3.6.1.4.1.33.16.3.1 | ScalarportIOCardType | read-only | mandatory | The hardware type of the I/O card in this slot. |
| 1.3.6.1.4.1.33.16.3.2 | ScalarportIOCardSerialNumber | read-only | mandatory | The ITouch serial number of the I/O card in this slot. |
| 1.3.6.1.4.1.33.16.3.3 | ScalarportIOCardOperStatus | read-only | mandatory | Status of the I/O card relative to the function card in this slot. |
| 1.3.6.1.4.1.33.16.3.4 | TableportTable | not-accessible | mandatory | A list of port entries, one for each port of each type on the slots I/O card. |
| 1.3.6.1.4.1.33.16.3.4.1 | RowportEntry | not-accessible | mandatory | Values for an I/O card port. |
| 1.3.6.1.4.1.33.16.3.4.1.1 | ColumnportType | read-only | mandatory | The port type. |
| 1.3.6.1.4.1.33.16.3.4.1.2 | ColumnportIndex | read-only | mandatory | An index value that uniquely identifies a port. |
| 1.3.6.1.4.1.33.16.4 | NodexController | |||
| 1.3.6.1.4.1.33.16.4.1 | TablecontrollerTable | not-accessible | mandatory | A list of controller entries, one for each controller of each type on the local system. |
| 1.3.6.1.4.1.33.16.4.1.1 | RowcontrollerEntry | not-accessible | mandatory | Values for a controller. |
| 1.3.6.1.4.1.33.16.4.1.1.1 | ColumncontrollerType | read-only | mandatory | The controller type. |
| 1.3.6.1.4.1.33.16.4.1.1.2 | ColumncontrollerIndex | read-only | mandatory | An index value that uniquely identifies a controller. |
| 1.3.6.1.4.1.33.16.4.1.1.3 | ColumncontrollerNetwork | read-write | mandatory | The instance identifier of the first object in the conceptual row entry for the segment, port, or controller this controller is to use, that is, segmentType, p… |
| 1.3.6.1.4.1.33.16.5 | NodexInterface | |||
| 1.3.6.1.4.1.33.16.5.1 | TableinterfaceTable | not-accessible | mandatory | A list of interface entries, corresponding to the MIB II Interface group. These are directly equivalent to hardware network controllers, and must be the lowest… |
| 1.3.6.1.4.1.33.16.5.1.1 | RowinterfaceEntry | not-accessible | mandatory | Values for an interface. |
| 1.3.6.1.4.1.33.16.5.1.1.1 | ColumninterfaceIndex | read-only | mandatory | An index value that uniquely identifies an interface. The interface identified by a particular value of this index is the same interface as identified by the s… |
| 1.3.6.1.4.1.33.16.5.1.1.2 | ColumninterfaceNetwork | read-write | mandatory | The instance identifier of the first object in the conceptual row entry for the segment, port, or controller this interface is to use, that is, segmentType, po… |
| 1.3.6.1.4.1.33.16.6 | NodexSlotBootControl | |||
| 1.3.6.1.4.1.33.16.6.1 | TableslotBootControlTable | not-accessible | mandatory | A list of slot boot control entries. |
| 1.3.6.1.4.1.33.16.6.1.1 | RowslotBootControlEntry | not-accessible | mandatory | Values for a chassis slot. |
| 1.3.6.1.4.1.33.16.6.1.1.1 | ColumnslotBootControlSlot | read-only | mandatory | An index value that uniquely identifies a slot, defined the same as slotIndex. |
| 1.3.6.1.4.1.33.16.6.1.1.2 | ColumnslotBootControlIndex | read-only | mandatory | An index value that uniquely identifies a boot control entry, from 1 to the number of entries for the slot. |
| 1.3.6.1.4.1.33.16.6.1.1.3 | ColumnslotBootControlStatus | read-write | mandatory | The status of the entry. Set to 'disabled' to disable the entry. |
| 1.3.6.1.4.1.33.16.6.1.1.4 | ColumnslotBootControlController | read-write | mandatory | The instance identifier of the first object in the conceptual row entry for the controller this entry selects for bootstrap operation, that is, controllerType.… |
| 1.3.6.1.4.1.33.16.6.1.1.5 | ColumnslotBootControlNetwork | read-write | mandatory | The instance identifier of the first object in the conceptual row entry for the segment or port this entry selects for bootstrap operation, that is, segmentTyp… |
| 1.3.6.1.4.1.33.16.6.1.1.6 | ColumnslotBootControlMopFile | read-write | mandatory | The software file name to request for down-line load of the server via MOP or XMOP. |
| 1.3.6.1.4.1.33.16.6.1.1.7 | ColumnslotBootControlInternetFile | read-write | mandatory | The filename to request when loading an image via TFTP. |
| 1.3.6.1.4.1.33.16.6.1.1.8 | ColumnslotBootControlInternetAddress | read-write | mandatory | The internet address of the system is to use for itself when loading via TFTP. The value 0.0.0.0 indicates default action. |
| 1.3.6.1.4.1.33.16.6.1.1.9 | ColumnslotBootControlInternetServer | read-write | mandatory | The internet address of the server to use when loading an image via TFTP. The value 0.0.0.0 indicates default action. |
| 1.3.6.1.4.1.33.16.6.1.1.10 | ColumnslotBootControlInternetGateway | read-write | mandatory | The internet address of the gateway to use when loading an image via TFTP. The value 0.0.0.0 indicates default action. |
| 1.3.6.1.4.1.33.16.6.1.1.11 | ColumnslotBootControlInternetDelimiter | read-write | mandatory | The character separating the load file directory name from the file name. |
| 1.3.6.1.4.1.33.16.6.2 | TableslotBootControlFlagTable | not-accessible | mandatory | A list of slot boot control source flag entries. |
| 1.3.6.1.4.1.33.16.6.2.1 | RowslotBootControlFlagEntry | not-accessible | mandatory | Values for a boot control flag. |
| 1.3.6.1.4.1.33.16.6.2.1.1 | ColumnslotBootControlFlagLoadBootpTftp | read-write | mandatory | Control for performing load over BOOTP/TFTP. |
| 1.3.6.1.4.1.33.16.6.2.1.2 | ColumnslotBootControlFlagParamBootpTftp | read-write | mandatory | Control for performing parameter load over BOOTP/TFTP. |
| 1.3.6.1.4.1.33.16.6.2.1.3 | ColumnslotBootControlFlagDumpBootpTftp | read-write | mandatory | Control for performing dump over BOOTP/TFTP. |
| 1.3.6.1.4.1.33.16.6.2.1.4 | ColumnslotBootControlFlagLoadTftpDirect | read-write | mandatory | Control for performing load over direct TFTP. |
| 1.3.6.1.4.1.33.16.6.2.1.5 | ColumnslotBootControlFlagParamTftpDirect | read-write | mandatory | Control for performing parameter load over direct TFTP. |
| 1.3.6.1.4.1.33.16.6.2.1.6 | ColumnslotBootControlFlagDumpTftpDirect | read-write | mandatory | Control for performing dump over direct TFTP. |
| 1.3.6.1.4.1.33.16.6.2.1.7 | ColumnslotBootControlFlagLoadLocal | read-write | mandatory | Control for performing load from a local device. |
| 1.3.6.1.4.1.33.16.6.2.1.8 | ColumnslotBootControlFlagParamLocal | read-write | mandatory | Control for performing parameter load from a local device. |
| 1.3.6.1.4.1.33.16.6.2.1.9 | ColumnslotBootControlFlagDumpLocal | read-write | mandatory | Control for performing dump from a local device. |
| 1.3.6.1.4.1.33.16.6.2.1.10 | ColumnslotBootControlFlagLoadMop | read-write | mandatory | Control for performing load over Digital's MOP. |
| 1.3.6.1.4.1.33.16.6.2.1.11 | ColumnslotBootControlFlagParamMop | read-write | mandatory | Control for performing parameter load over Digital's MOP. |
| 1.3.6.1.4.1.33.16.6.2.1.12 | ColumnslotBootControlFlagDumpMop | read-write | mandatory | Control for performing dump over Digital's MOP. |
| 1.3.6.1.4.1.33.16.6.2.1.13 | ColumnslotBootControlFlagLoadXmop | read-write | mandatory | Control for performing load over ITouch extended MOP. |
| 1.3.6.1.4.1.33.16.6.2.1.14 | ColumnslotBootControlFlagParamXmop | read-write | mandatory | Control for performing parameter load over ITouch extended MOP. |
| 1.3.6.1.4.1.33.16.6.2.1.15 | ColumnslotBootControlFlagDumpXmop | read-write | mandatory | Control for performing dump over ITouch extended MOP. |
| 1.3.6.1.4.1.33.16.6.2.1.16 | ColumnslotBootControlFlagLoadRarpTftp | read-write | mandatory | Control for performing load over RARP/TFTP. |
| 1.3.6.1.4.1.33.16.6.2.1.17 | ColumnslotBootControlFlagParamRarpTftp | read-write | mandatory | Control for performing parameter load over RARP/TFTP. |
| 1.3.6.1.4.1.33.16.6.2.1.18 | ColumnslotBootControlFlagDumpRarpTftp | read-write | mandatory | Control for performing dump over RARP/TFTP. |
| 1.3.6.1.4.1.33.16.6.3 | TableslotBootControlStorageTable | not-accessible | mandatory | A list of slot boot control Storage entries. |
| 1.3.6.1.4.1.33.16.6.3.1 | RowslotBootControlStorageEntry | not-accessible | mandatory | Values for a chassis slot. |
| 1.3.6.1.4.1.33.16.6.3.1.1 | ColumnslotBootControlStorageClientSlot | read-only | mandatory | An index value that uniquely identifies a slot, defined the same as slotIndex. |
| 1.3.6.1.4.1.33.16.6.3.1.2 | ColumnslotBootControlStorageServerSlot | read-only | mandatory | An index value that uniquely identifies the slot in which the Storage record resides, with the same values as slotIndex. |
| 1.3.6.1.4.1.33.16.6.3.1.3 | ColumnslotBootControlStorageStatus | read-only | mandatory | The status of the entry. |
| 1.3.6.1.4.1.33.16.6.3.1.4 | ColumnslotBootControlStorageFailures | read-only | mandatory | The number of times a read from or write to a given Storage location failed |
| 1.3.6.1.4.1.33.16.7 | NodexSlot | |||
| 1.3.6.1.4.1.33.16.7.1 | TableslotTable | not-accessible | mandatory | A list of slot entries. |
| 1.3.6.1.4.1.33.16.7.1.1 | RowslotEntry | not-accessible | mandatory | Values for a chassis slot. |
| 1.3.6.1.4.1.33.16.7.1.1.1 | ColumnslotIndex | read-only | mandatory | An index value that uniquely identifies a slot, in the range 0 to basicSlotNumber, where the value 0 indicates the same slot as basicSlot. As the objects found… |
| 1.3.6.1.4.1.33.16.7.1.1.2 | ColumnslotAdminAction | read-write | mandatory | Control to cause reset of the system in a slot. When read, the value is always 'ready'. Setting to 'reset' or 'resetHold' causes a single attempt to take that … |
| 1.3.6.1.4.1.33.16.7.1.1.3 | ColumnslotOperStatus | read-only | mandatory | Relative to the chassis, the current operating status of the system in the slot. |
| 1.3.6.1.4.1.33.16.7.1.1.4 | ColumnslotSecondsSinceReset | read-only | mandatory | The number of seconds since the system in the slot was last reset by hardware or software. |
| 1.3.6.1.4.1.33.16.7.1.1.5 | ColumnslotHardwareType | read-only | mandatory | The type of hardware in the slot. |
| 1.3.6.1.4.1.33.16.7.1.1.6 | ColumnslotHardwareSerialNumber | read-only | mandatory | The ITouch serial number of the function card hardware in this slot. |
| 1.3.6.1.4.1.33.16.7.1.1.7 | ColumnslotHardwareRevision | read-only | mandatory | This revision level of the function card hardware in the slot. |
| 1.3.6.1.4.1.33.16.7.1.1.8 | ColumnslotIOCardType | read-only | mandatory | The hardware type of the I/O card in this slot. |
| 1.3.6.1.4.1.33.16.7.1.1.9 | ColumnslotIOCardSerialNumber | read-only | mandatory | The ITouch serial number of the I/O card in this slot. |
| 1.3.6.1.4.1.33.16.7.1.1.10 | ColumnslotIOCardOperStatus | read-only | mandatory | Status of the I/O card relative to the function card in this slot. |
| 1.3.6.1.4.1.33.16.7.1.1.11 | ColumnslotBootstrapFirmwareRevision | read-only | mandatory | The firmware revision level of the bootstrap ROM installed in the system in the slot. |
| 1.3.6.1.4.1.33.16.7.1.1.12 | ColumnslotElementalFirmwareRevision | read-only | mandatory | The firmware revision level of the minimal function ROM (management bus microprocessor) installed in the system in the slot. |
| 1.3.6.1.4.1.33.16.7.1.1.13 | ColumnslotMemorySize | read-only | mandatory | The number of bytes of memory installed in the system in the slot. |
| 1.3.6.1.4.1.33.16.7.1.1.14 | ColumnslotLedNumber | read-only | mandatory | The number of LEDs on the system in the slot. A value of 0 indicates none, unknown, or status not readable. |
| 1.3.6.1.4.1.33.16.7.1.1.15 | ColumnslotLedStatus | read-only | mandatory | The status of the LEDs displayed on the front and back of the system in the slot. The first bit is the high-order bit of the first byte of the value, proceedin… |
| 1.3.6.1.4.1.33.16.7.1.1.16 | ColumnslotBase802Address | read-only | mandatory | Base IEEE 802 global address for the slot. |
| 1.3.6.1.4.1.33.16.7.1.1.17 | ColumnslotIpAddress | read-only | mandatory | An internet address to which the system in this slot might respond. May be one of many. |
| 1.3.6.1.4.1.33.16.7.1.1.18 | ColumnslotPlus5Status | read-only | mandatory | Status of the +5 volt power to the slot. |
| 1.3.6.1.4.1.33.16.7.1.1.19 | ColumnslotPlus12Status | read-only | mandatory | Status of the +12 volt power to the slot. |
| 1.3.6.1.4.1.33.16.7.1.1.20 | ColumnslotMinus12Status | read-only | mandatory | Status of the -12 volt power to the slot. |
| 1.3.6.1.4.1.33.16.7.1.1.21 | ColumnslotPlus5Watts | read-only | mandatory | Tenths of watts of +5 volt power currently drawn by the slot. |
| 1.3.6.1.4.1.33.16.7.1.1.22 | ColumnslotPlus12Watts | read-only | mandatory | Tenths of watts of +12 volt power currently drawn by the slot. |
| 1.3.6.1.4.1.33.16.7.1.1.23 | ColumnslotMinus12Watts | read-only | mandatory | Tenths of watts of -12 volt power currently drawn by the slot. |
| 1.3.6.1.4.1.33.16.7.1.1.24 | ColumnslotIOCardHardwareVersion | read-only | mandatory | Version number of I/O card in the slot. |
| 1.3.6.1.4.1.33.16.7.1.1.25 | ColumnslotRestoreNVS | read-write | mandatory | Setting to 'execute' causes the non-volatile parameter storage to be restored from an installed memory card. Setting to 'ready' has no effect. |
| 1.3.6.1.4.1.33.16.7.1.1.26 | ColumnslotDefaultNVS | read-write | mandatory | Setting to 'execute' causes non-volatile stored parameters to be reset to factory defaults. Setting to 'ready' has no effect. |
| 1.3.6.1.4.1.33.16.7.2 | TableslotBootTable | not-accessible | mandatory | A list of slot bootstrap status entries. A given slot has an entry in this table only when slotOperStatus is one of: loadRequested, loading, dumpRequested, dum… |
| 1.3.6.1.4.1.33.16.7.2.1 | RowslotBootEntry | not-accessible | mandatory | Bootstrap status values for a chassis slot. |
| 1.3.6.1.4.1.33.16.7.2.1.1 | ColumnslotBootIndex | read-only | mandatory | An index value that uniquely identifies a slot, defined the same as slotIndex. |
| 1.3.6.1.4.1.33.16.7.2.1.2 | ColumnslotBootIfIndex | read-only | mandatory | An index value that uniquely identifies the interface in use for bootstrap functions. The interface identified by a particular value of this index is the same … |
| 1.3.6.1.4.1.33.16.7.2.1.3 | ColumnslotBootNetwork | read-only | mandatory | The instance identifier of the first object in the conceptual row entry for the segment or port this interface is using, that is, segmentType or portType. |
| 1.3.6.1.4.1.33.16.7.2.1.4 | ColumnslotBootProtocol | read-only | mandatory | The protocol in use for bootstrap operation. |
| 1.3.6.1.4.1.33.16.7.2.1.5 | ColumnslotBoot802Address | read-only | mandatory | IEEE 802 global address in use for bootstrap operation. |
| 1.3.6.1.4.1.33.16.7.2.1.6 | ColumnslotBootAddressType | read-only | mandatory | The type of network address contained in slotBootAddress. |
| 1.3.6.1.4.1.33.16.7.2.1.7 | ColumnslotBootAddress | read-only | mandatory | The network address the system in the slot is using to identify itself for bootstrap operation. |
| 1.3.6.1.4.1.33.16.7.2.1.8 | ColumnslotBootServerAddressType | read-only | mandatory | The type of network address contained in slotBootServerAddress. |
| 1.3.6.1.4.1.33.16.7.2.1.9 | ColumnslotBootServerAddress | read-only | mandatory | The network address of the system supplying bootstrap services to the system in the slot. |
| 1.3.6.1.4.1.33.16.7.2.1.10 | ColumnslotBootGatewayAddress | read-only | mandatory | The internet address of the router in use for bootstrap operation. |
| 1.3.6.1.4.1.33.16.7.2.1.11 | ColumnslotBootFileName | read-only | mandatory | The full name of the file in use for bootstrap operation. |
| 1.3.6.1.4.1.33.16.7.2.1.12 | ColumnslotBootBlockNumber | read-only | mandatory | The current block number being transferred for bootstrap operation, zero if unknown or not applicable. |
| 1.3.6.1.4.1.33.16.7.2.1.13 | ColumnslotBootCrashCode | read-only | mandatory | If slotOperStatus is dumpRequested or dumping, a code number to identify the crash reason; otherwise zero length. |
| 1.3.6.1.4.1.33.16.7.3 | TableslotControllerTable | not-accessible | mandatory | A list of controller entries, one for each controller of each type in each slot. |
| 1.3.6.1.4.1.33.16.7.3.1 | RowslotControllerEntry | not-accessible | mandatory | Values for a controller. |
| 1.3.6.1.4.1.33.16.7.3.1.1 | ColumnslotControllerType | read-only | mandatory | The controller type. |
| 1.3.6.1.4.1.33.16.7.3.1.2 | ColumnslotControllerIndex | read-only | mandatory | An index value that uniquely identifies a controller. |
| 1.3.6.1.4.1.33.16.7.3.1.3 | ColumnslotControllerNetwork | read-only | mandatory | The instance identifier of the first object in the conceptual row entry for the segment or port this controller is to use, that is, segmentType or portType. |
| 1.3.6.1.4.1.33.16.8 | NodexPowerSupply | |||
| 1.3.6.1.4.1.33.16.8.1 | TablepowerSupplyTable | not-accessible | mandatory | A list of power supply entries. |
| 1.3.6.1.4.1.33.16.8.1.1 | RowpowerSupplyEntry | not-accessible | mandatory | Values for a chassis power supply. |
| 1.3.6.1.4.1.33.16.8.1.1.1 | ColumnpowerSupplyIndex | read-only | mandatory | An index value that uniquely identifies a power supply, in the range 1 to the number of power supply slots in the chassis. |
| 1.3.6.1.4.1.33.16.8.1.1.2 | ColumnpowerSupplyAdminAction | read-write | mandatory | Control to cause reset of the power supply. When read, the value is always 'ready'. Setting to 'reset' or 'resetHold' causes a single attempt to take that acti… |
| 1.3.6.1.4.1.33.16.8.1.1.3 | ColumnpowerSupplyFirmwareVersion | read-only | mandatory | Version number of power supply firmware. |
| 1.3.6.1.4.1.33.16.8.1.1.4 | ColumnpowerSupplyRedundancyStatus | read-only | mandatory | The current redundancy status of the power supply. |
| 1.3.6.1.4.1.33.16.8.1.1.5 | ColumnpowerSupplyPlus5Status | read-only | mandatory | Status of the +5 volt power from the power supply. |
| 1.3.6.1.4.1.33.16.8.1.1.6 | ColumnpowerSupplyPlus12Status | read-only | mandatory | Status of the +12 volt power from the power supply. |
| 1.3.6.1.4.1.33.16.8.1.1.7 | ColumnpowerSupplyMinus12Status | read-only | mandatory | Status of the -12 volt power from the power supply. |
| 1.3.6.1.4.1.33.16.8.1.1.8 | ColumnpowerSupplyThermalWarningStatus | read-only | mandatory | The current thermal warning status of the power supply. |
| 1.3.6.1.4.1.33.16.8.1.1.9 | ColumnpowerSupplyThermalShutdownStatus | read-only | mandatory | The current thermal shutdown status of the power supply. |
| 1.3.6.1.4.1.33.16.8.1.1.10 | ColumnpowerSupplyFanStatus | read-only | mandatory | The current status of the power supply's fan. |
| 1.3.6.1.4.1.33.16.8.1.1.11 | ColumnpowerSupplyHardwareInhibitStatus | read-only | mandatory | The current status of the power supply's hardware inhibit. |
| 1.3.6.1.4.1.33.16.8.1.1.12 | ColumnpowerSupplyPlus5History | read-only | mandatory | History of the +5 volt power from the power supply. |
| 1.3.6.1.4.1.33.16.8.1.1.13 | ColumnpowerSupplyPlus12History | read-only | mandatory | History of the +12 volt power from the power supply. |
| 1.3.6.1.4.1.33.16.8.1.1.14 | ColumnpowerSupplyMinus12History | read-only | mandatory | History of the -12 volt power from the power supply. |
| 1.3.6.1.4.1.33.16.8.1.1.15 | ColumnpowerSupplyThermalWarningHistory | read-only | mandatory | The thermal warning history of the power supply. |
| 1.3.6.1.4.1.33.16.8.1.1.16 | ColumnpowerSupplyThermalShutdownHistory | read-only | mandatory | The thermal shutdown history of the power supply. |
| 1.3.6.1.4.1.33.16.8.1.1.17 | ColumnpowerSupplyFanHistory | read-only | mandatory | The status history of the power supply's fan. |
| 1.3.6.1.4.1.33.16.8.1.1.18 | ColumnpowerSupplyHardwareInhibitHistory | read-only | mandatory | The status history of the power supply's hardware inhibit. |
| 1.3.6.1.4.1.33.16.8.1.1.19 | ColumnpowerSupplyPlus5Volts | read-only | mandatory | In hundredths, volts of +5 volt power currently provided by the power supply. A value of 0 indicates unknown. |
| 1.3.6.1.4.1.33.16.8.1.1.20 | ColumnpowerSupplyPlus12Volts | read-only | mandatory | In hundredths, volts of +12 volt power currently provided by the power supply. A value of 0 indicates unknown. |
| 1.3.6.1.4.1.33.16.8.1.1.21 | ColumnpowerSupplyMinus12Volts | read-only | mandatory | In hundredths, volts of -12 volt power currently provided by the power supply. A value of 0 indicates unknown. |
| 1.3.6.1.4.1.33.16.8.1.1.22 | ColumnpowerSupplyWatts | read-only | mandatory | Watts of power currently drawn from this power supply. A value of 0 indicates unknown. |
| 1.3.6.1.4.1.33.16.8.1.1.23 | ColumnpowerSupplyWattsMax | read-only | mandatory | Maximum watts of power available from this power supply. A value of 0 indicates unknown. |
| 1.3.6.1.4.1.33.16.8.1.1.24 | ColumnpowerSupplyChassisWatts | read-only | mandatory | Total watts of power currently drawn by the entire chassis. A value of 0 indicates unknown. |
| 1.3.6.1.4.1.33.16.8.1.1.25 | ColumnpowerSupplyChassisWattsMax | read-only | mandatory | Total maximum watts of power available from all the power supplies in the chassis. A value of 0 indicates unknown. |
| 1.3.6.1.4.1.33.16.8.1.1.26 | ColumnpowerSupplyHardwareType | read-only | mandatory | The type of power supply. |
| 1.3.6.1.4.1.33.16.9 | NodexFirmwareUpdate | |||
| 1.3.6.1.4.1.33.16.9.1 | TablefirmwareUpdateTable | not-accessible | mandatory | Table of descriptive and status information concerning the writing of firmware to a target I/O card. |
| 1.3.6.1.4.1.33.16.9.1.1 | RowfirmwareUpdateEntry | not-accessible | mandatory | An entry in the table concerning the writing of firmware to a target I/O card. |
| 1.3.6.1.4.1.33.16.9.1.1.1 | ColumnfirmwareUpdateSlotIndex | read-only | mandatory | This variable identifies the slot to which is to be the target of the firmware update. |
| 1.3.6.1.4.1.33.16.9.1.1.2 | ColumnfirmwareUpdateDefaultFileName | read-only | mandatory | This variable when read will obtain the default file name from the target. |
| 1.3.6.1.4.1.33.16.9.1.1.3 | ColumnfirmwareUpdateFileName | read-write | mandatory | This variable contains the name of the file to be read from the flash memory card and written to the target. |
| 1.3.6.1.4.1.33.16.9.1.1.4 | ColumnfirmwareUpdateStatus | read-write | mandatory | This variable is used to start the update process. The agent always 'ready' for this value. Setting this value to 'execute' causes the agent to write the file … |
| 1.3.6.1.4.1.33.16.9.1.1.5 | ColumnfirmwareUpdateState | read-only | mandatory | This variable indicates the current state of firmware update, 'idle' indicates that firmware update may be initiated, and 'writing' indicates that an update is… |
| 1.3.6.1.4.1.33.16.9.1.1.6 | ColumnfirmwareUpdateCompletionStatus | read-only | mandatory | This variable indicates the completion status of the the last firmware update attempt. 'none' indicates that no firmware update has yet been attempted. |
| 1.3.6.1.4.1.33.16.9.1.1.7 | ColumnfirmwareUpdateMethod | read-write | mandatory | This variable indicates the method of update of the firmware update attempt. |
| 1.3.6.1.4.1.33.17 | NodexRepeater | |||
| 1.3.6.1.4.1.33.17.1 | NodeaccessViolation | Access violation by connected system with Ethernet address not allowed by repeaterPortAccessTable and repeaterPortAccessAction. | ||
| 1.3.6.1.4.1.33.17.1 | NodexRepeaterInfo | |||
| 1.3.6.1.4.1.33.17.1.1 | ScalarrepeaterAccessViolation | read-write | mandatory | Controls action to take when an access violation occurs. |
| 1.3.6.1.4.1.33.17.1.2 | ScalarrepeaterMyGroup | read-only | mandatory | The index value of the group that is directly associated with the agent. The snmp support for the group associated with the agent is a superset of the support … |
| 1.3.6.1.4.1.33.17.1.3 | ScalarrepeaterFifoOverflows | read-only | deprecated | Deprecated, use repeaterRepeaterFifoOverflows in the repeaterRepeater group for the desired repeater. |
| 1.3.6.1.4.1.33.17.1.4 | ScalarrepeaterLEDDisplay | read-write | mandatory | Controls reason for flashing front panel LEDs. |
| 1.3.6.1.4.1.33.17.1.5 | ScalarrepeaterReports | read-write | deprecated | Deprecated, use repeaterRepeaterReports in the repeaterRepeater group for the desired repeater on which report generation is to be controlled. |
| 1.3.6.1.4.1.33.17.1.6 | ScalarrepeaterHealthTrap | read-write | mandatory | Controls the generation of the repeater health trap. |
| 1.3.6.1.4.1.33.17.1.7 | ScalarrepeaterStatusChangeTrap | read-write | mandatory | Controls the generation of the repeater status change trap. |
| 1.3.6.1.4.1.33.17.1.8 | ScalarrepeaterAccessViolationTrap | read-write | mandatory | Controls the generation of the repeater access violation trap. |
| 1.3.6.1.4.1.33.17.1.9 | ScalarrepeaterIntegrityLossTrap | read-write | mandatory | Controls the generation of the repeater integrity loss trap. |
| 1.3.6.1.4.1.33.17.1.10 | ScalarrepeaterRedundancyPathChangeTrap | read-write | mandatory | Controls the generation of the repeater redundancy path change trap. |
| 1.3.6.1.4.1.33.17.2 | NodeintegrityLoss | This port has lost link integrity. | ||
| 1.3.6.1.4.1.33.17.2 | NodexRepeaterGroupInfo | |||
| 1.3.6.1.4.1.33.17.2.1 | TablerepeaterGroupTable | not-accessible | mandatory | Table of descriptive and status information about the groups. |
| 1.3.6.1.4.1.33.17.2.1.1 | RowrepeaterGroupEntry | not-accessible | mandatory | An entry in the table, containing information about a group. |
| 1.3.6.1.4.1.33.17.2.1.1.1 | ColumnrepeaterGroupIndex | read-only | mandatory | This variable identifies the group within the repeater for which this entry contains information. This value is the same as rptrGroupIndex. |
| 1.3.6.1.4.1.33.17.2.1.1.2 | ColumnrepeaterGroupSQE | read-only | deprecated | Deprecated, use repeaterRepeaterSQE in the repeaterRepeaterGroup for the SQE count on the desired repeater. This object will always return the count for repeat… |
| 1.3.6.1.4.1.33.17.2.1.1.3 | ColumnrepeaterGroupJabbers | read-only | deprecated | Deprecated, use repeaterRepeaterJabbers in the repeaterRepeaterGroup for the Jabber count on the desired repeater. This object will always return the count for… |
| 1.3.6.1.4.1.33.17.2.1.1.4 | ColumnrepeaterGroupSegment | read-write | deprecated | Deprecated, use repeaterRepeaterSegment in the repeaterRepeaterGroup to control the segment mapping for the desired repeater. This object will always control t… |
| 1.3.6.1.4.1.33.17.2.1.1.5 | ColumnrepeaterGroupSecurityLock | read-write | mandatory | This variable indicates the state of security lockdown on an unmanaged repeater. The only writable value is 'unlocked'. |
| 1.3.6.1.4.1.33.17.2.1.1.6 | ColumnrepeaterGroupIOCardType | read-only | mandatory | The hardware type of the I/O card, as defined in ITouch Assigned Numbers. |
| 1.3.6.1.4.1.33.17.2.1.1.7 | ColumnrepeaterGroupIOCardFirmwareVersion | read-only | mandatory | The firmware revision level of the I/O card ROM. |
| 1.3.6.1.4.1.33.17.2.1.1.8 | ColumnrepeaterGroupIOCardOperStatus | read-only | mandatory | Relative to the chassis, the current operating status of the I/O card. |
| 1.3.6.1.4.1.33.17.2.1.1.9 | ColumnrepeaterGroupManagement | read-only | mandatory | This variable indicates the level of management control and observation available. |
| 1.3.6.1.4.1.33.17.2.1.1.10 | ColumnrepeaterGroupRepeaterNumber | read-only | mandatory | The number of logical repeaters visible via this repeater. |
| 1.3.6.1.4.1.33.17.2.1.1.11 | ColumnrepeaterGroupRepeaterHardwareVersion | read-only | mandatory | The repeater chip set hardware revision level. |
| 1.3.6.1.4.1.33.17.2.1.1.12 | ColumnrepeaterGroupManagerRepeater | read-write | mandatory | The logical repeater to which the manager card, if present, is attached. |
| 1.3.6.1.4.1.33.17.2.1.1.13 | ColumnrepeaterGroupFifoErrors | read-only | mandatory | This variable will reflect the number of times that the report FIFO has gone out of synchronization. |
| 1.3.6.1.4.1.33.17.2.1.1.14 | ColumnrepeaterGroupCpuUtilization | read-only | mandatory | The average CPU utilization for the processor which maintains statistics and implements monitoring for the group, expressed as percentage times 100. |
| 1.3.6.1.4.1.33.17.2.1.1.15 | ColumnrepeaterGroupMemoryUtilization | read-only | mandatory | The current memory utilization for the processor which maintains statistics and implements monitoring for the group, expressed as percentage used times 100. |
| 1.3.6.1.4.1.33.17.2.1.1.16 | ColumnrepeaterGroupAlarmCount | read-only | mandatory | The number of alarms currently being monitored by the processor for comparison with RMON thresholds. |
| 1.3.6.1.4.1.33.17.3 | NoderedundancyPathChange | This trap issued to indicate that a redundancy group has experienced a path change. The offending group and the new path are included in the trap. | ||
| 1.3.6.1.4.1.33.17.3 | NodexRepeaterPortInfo | |||
| 1.3.6.1.4.1.33.17.3.1 | TablerepeaterPortTable | not-accessible | mandatory | Table of descriptive and status information about the ports. |
| 1.3.6.1.4.1.33.17.3.1.1 | RowrepeaterPortEntry | not-accessible | mandatory | An entry in the table, containing information about a port. |
| 1.3.6.1.4.1.33.17.3.1.1.1 | ColumnrepeaterPortGroupIndex | read-only | mandatory | This variable identifies the group containing the port for which this entry contains infromation. |
| 1.3.6.1.4.1.33.17.3.1.1.2 | ColumnrepeaterPortIndex | read-only | mandatory | This variable identifies the port within the group within the repeater for which this entry contains management information. This value can never be greater th… |
| 1.3.6.1.4.1.33.17.3.1.1.3 | ColumnrepeaterPortName | read-write | mandatory | The port's display name. |
| 1.3.6.1.4.1.33.17.3.1.1.4 | ColumnrepeaterPortAutoPolarity | read-write | mandatory | Controls whether the port will automatically determine its polarity. |
| 1.3.6.1.4.1.33.17.3.1.1.5 | ColumnrepeaterPortPolarityDirection | read-only | mandatory | If repeaterPortAutoPolarity is enabled, this is the current polarity of the port. |
| 1.3.6.1.4.1.33.17.3.1.1.6 | ColumnrepeaterPortPulse | read-write | mandatory | Controls whether the port will periodically generate a test pulse to determine the status of the port. |
| 1.3.6.1.4.1.33.17.3.1.1.7 | ColumnrepeaterPortPulseStatus | read-only | mandatory | If repeaterPortPulse is enabled, this is indicates whether the test pulse response is being detected. |
| 1.3.6.1.4.1.33.17.3.1.1.8 | ColumnrepeaterPortPulseLosses | read-only | mandatory | The number of times that a test pulse has been sent and a response was not received. |
| 1.3.6.1.4.1.33.17.3.1.1.9 | ColumnrepeaterPortDistance | read-write | mandatory | Controls whether the port will support extended distances on the port. |
| 1.3.6.1.4.1.33.17.3.1.1.10 | ColumnrepeaterPortSofMissing | read-only | mandatory | The number of times that alternating zero/one bits were seen after an inter-packet gap and were not followed by two one bits. |
| 1.3.6.1.4.1.33.17.3.1.1.11 | ColumnrepeaterPortMCVs | read-only | mandatory | The number of manchester violation errors detected on this port. |
| 1.3.6.1.4.1.33.17.3.1.1.12 | ColumnrepeaterPortZero | read-write | mandatory | Control to zero the hub port's counters. The agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. |
| 1.3.6.1.4.1.33.17.3.1.1.13 | ColumnrepeaterPortSinceZero | read-only | mandatory | Number of time ticks since the port's counters were zeroed. |
| 1.3.6.1.4.1.33.17.3.1.1.14 | ColumnrepeaterPortAccessAction | read-write | mandatory | Control whether packets will be accepted or discarded if they are in the access list. The inverse action is applied to packets from all addresses not in the li… |
| 1.3.6.1.4.1.33.17.3.1.1.15 | ColumnrepeaterPortAccessState | read-only | mandatory | Indicates whether the port was disabled due to receiving a frame from an invalid source address. |
| 1.3.6.1.4.1.33.17.3.1.1.16 | ColumnrepeaterPortAccessType | read-only | mandatory | Indicates the type of the port. |
| 1.3.6.1.4.1.33.17.3.1.1.17 | ColumnrepeaterPortAccessAllStatus | read-write | mandatory | Setting this field to invalid will delete all access addresses associated with this port. Setting this field to valid has no effect. |
| 1.3.6.1.4.1.33.17.3.1.1.18 | ColumnrepeaterPortPortLastViolationAddress | read-only | mandatory | Address that last caused an access violation. |
| 1.3.6.1.4.1.33.17.3.1.1.19 | ColumnrepeaterPortPortAddressViolations | read-only | mandatory | Number of access violations. |
| 1.3.6.1.4.1.33.17.3.1.1.20 | ColumnrepeaterPortSegment | read-only | mandatory | Returns the indirect mapping of the ethernet repeater to which this port is connected. |
| 1.3.6.1.4.1.33.17.3.1.1.21 | ColumnrepeaterPortAccessLearn | read-write | mandatory | Controls how the port will learn the source addresses that can come in on the port. |
| 1.3.6.1.4.1.33.17.3.1.1.22 | ColumnrepeaterPortEthernetRepeater | read-write | mandatory | For repeaters that implement non-proxy management of logical repeaters, this variable selects the logical Ethernet repeater to which the port is attached. |
| 1.3.6.1.4.1.33.17.3.1.1.23 | ColumnrepeaterPortRepeatersAllowed | read-only | mandatory | The list of repeaters to which this port can be attached. The OCTET STRING contains a bitmap, with a bit for 'none' and one bit for each repeater, and enough o… |
| 1.3.6.1.4.1.33.17.3.1.1.24 | ColumnrepeaterPortGlobalSecurityAddress | read-only | mandatory | This variable represents the global address which is currently applied to the port. |
| 1.3.6.1.4.1.33.17.3.1.1.25 | ColumnrepeaterPortGlobalAddressChanges | read-only | mandatory | This variable represents the number of times since counters have been zeroed, that a global address change occured on the port. |
| 1.3.6.1.4.1.33.17.3.1.1.26 | ColumnrepeaterPortPercentUtilization | read-only | mandatory | This variable will reflect the percentage of a full ethernet load that this port has received since last zeroed. The value is calculated as '(8(bytesReceived +… |
| 1.3.6.1.4.1.33.17.3.2 | TablerepeaterPortAccessTable | not-accessible | mandatory | Table of access control for the ports. |
| 1.3.6.1.4.1.33.17.3.2.1 | RowrepeaterPortAccessEntry | not-accessible | mandatory | An entry in the table, containing access information about a port. |
| 1.3.6.1.4.1.33.17.3.2.1.1 | ColumnrepeaterPortAccessGroupIndex | read-only | mandatory | This variable identifies the group containing the access entry for which this entry contains information. The group ID may only be that of the target agent. Sp… |
| 1.3.6.1.4.1.33.17.3.2.1.2 | ColumnrepeaterPortAccessPortIndex | read-only | mandatory | This variable identifies the port containing the access entry for which this entry contains information. |
| 1.3.6.1.4.1.33.17.3.2.1.3 | ColumnrepeaterPortAccessAddress | read-only | mandatory | This value will be compared to the source address of all packets received on the port in applying the access action |
| 1.3.6.1.4.1.33.17.3.2.1.4 | ColumnrepeaterPortAccessStatus | read-write | mandatory | The status of the entry. Set to 'invalid' to remove the rule. |
| 1.3.6.1.4.1.33.17.3.3 | ScalarrepeaterPortAccessGroupIndexShadow | read-write | mandatory | This variable identifies the group which contains a port to which an access address is to be assigned. The group ID may only be that of the target agent. Speci… |
| 1.3.6.1.4.1.33.17.3.4 | ScalarrepeaterPortAccessPortIndexShadow | read-write | mandatory | This variable identifies the port of a group to which an access address is to be assigned. |
| 1.3.6.1.4.1.33.17.3.5 | ScalarrepeaterPortAccessAddressShadow | read-write | mandatory | This value contains the ethernet address which is to be added to the access address table for the port specified by repeaterPortAccessGroupIndexShadow and repe… |
| 1.3.6.1.4.1.33.17.3.6 | ScalarrepeaterPortAccessStatusShadow | read-write | mandatory | When read, this variable will always return 'ready'. When this variable is set to 'execute' the address specified by repeaterPortAccessAddressShadow will be ad… |
| 1.3.6.1.4.1.33.17.3.7 | TablerepeaterPort2Table | not-accessible | mandatory | Table of more descriptive and status information about the ports. |
| 1.3.6.1.4.1.33.17.3.7.1 | RowrepeaterPort2Entry | not-accessible | mandatory | An entry in the table, containing information about a port. Index is identical to repeaterPortTable. |
| 1.3.6.1.4.1.33.17.3.7.1.1 | ColumnrepeaterPort2RmonOctets | read-only | mandatory | The total number of octets of data (including those in bad packets) received on the port (excluding framing bits but including FCS octets). |
| 1.3.6.1.4.1.33.17.3.7.1.2 | ColumnrepeaterPort2RmonPkts | read-only | mandatory | The total number of packets (including error packets) received on the port. |
| 1.3.6.1.4.1.33.17.3.7.1.3 | ColumnrepeaterPort2RmonBroadcastPkts | read-only | mandatory | The total number of good packets received on the port that were directed to the broadcast address. |
| 1.3.6.1.4.1.33.17.3.7.1.4 | ColumnrepeaterPort2RmonMulticastPkts | read-only | mandatory | The total number of good packets received on the port that were directed to a multicast address. Note that this number does not include packets directed to the… |
| 1.3.6.1.4.1.33.17.3.7.1.5 | ColumnrepeaterPort2RmonCRCAlignErrors | read-only | mandatory | The total number of packets received on the port that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive,… |
| 1.3.6.1.4.1.33.17.3.7.1.6 | ColumnrepeaterPort2RmonPkts64Octets | read-only | mandatory | The total number of packets (including error packets) received on the port that were 64 octets in length (excluding framing bits but including FCS octets). |
| 1.3.6.1.4.1.33.17.3.7.1.7 | ColumnrepeaterPort2RmonPkts65to127Octets | read-only | mandatory | The total number of packets (including error packets) received on the port that were between 65 and 127 octets in length inclusive (excluding framing bits but … |
| 1.3.6.1.4.1.33.17.3.7.1.8 | ColumnrepeaterPort2RmonPkts128to255Octets | read-only | mandatory | The total number of packets (including error packets) received on the port that were between 128 and 255 octets in length inclusive (excluding framing bits but… |
| 1.3.6.1.4.1.33.17.3.7.1.9 | ColumnrepeaterPort2RmonPkts256to511Octets | read-only | mandatory | The total number of packets (including error packets) received on the port that were between 256 and 511 octets in length inclusive (excluding framing bits but… |
| 1.3.6.1.4.1.33.17.3.7.1.10 | ColumnrepeaterPort2RmonPkts512to1023Octets | read-only | mandatory | The total number of packets (including error packets) received on the port that were between 512 and 1023 octets in length inclusive (excluding framing bits bu… |
| 1.3.6.1.4.1.33.17.3.7.1.11 | ColumnrepeaterPort2RmonPkts1024to1518Octets | read-only | mandatory | The total number of packets (including error packets) received on the port that were between 1024 and 1518 octets in length inclusive (excluding framing bits b… |
| 1.3.6.1.4.1.33.17.3.7.1.12 | ColumnrepeaterPort2TrafficRatio | read-only | mandatory | The portion of segment bandwidth used by the port over a 5 second interval, expressed as percentage times 100. |
| 1.3.6.1.4.1.33.17.3.7.1.13 | ColumnrepeaterPort2CollisionRatio | read-only | mandatory | The ratio of collisions the port participated in to total packets over a 5 second interval, expressed as percentage times 100. |
| 1.3.6.1.4.1.33.17.3.7.1.14 | ColumnrepeaterPort2ErrorRatio | read-only | mandatory | The ratio of total number of error frames on the port to total packets over a 5 second interval, expressed as percentage times 100. |
| 1.3.6.1.4.1.33.17.3.7.1.15 | ColumnrepeaterPort2BroadcastRatio | read-only | mandatory | The ratio of good packets directed by the port to the broadcast address to total packets over a 5 second interval, expressed as percentage times 100. |
| 1.3.6.1.4.1.33.17.3.7.1.16 | ColumnrepeaterPort2MulticastRatio | read-only | mandatory | The ratio of good packets directed by the port to any multicast address (but not the broadcast address) to total packets over a 5 second interval, expressed as… |
| 1.3.6.1.4.1.33.17.3.7.1.17 | ColumnrepeaterPort2UnicastRatio | read-only | mandatory | The ratio of good packets directed by the port to any address other than a multicast or broadcast address to total packets over a 5 second interval, expressed … |
| 1.3.6.1.4.1.33.17.4 | NodexRepeaterSlotInfo | |||
| 1.3.6.1.4.1.33.17.4.1 | TablerepeaterSlotSegmentTable | not-accessible | deprecated | Deprecated, no replacement. |
| 1.3.6.1.4.1.33.17.4.1.1 | RowrepeaterSlotSegmentEntry | not-accessible | deprecated | Deprecated, no replacement. |
| 1.3.6.1.4.1.33.17.4.1.1.1 | ColumnrepeaterSlotIndex | read-only | deprecated | Deprecated, no replacement. |
| 1.3.6.1.4.1.33.17.4.1.1.2 | ColumnrepeaterSlotSegment | read-only | deprecated | Deprecated, no replacement. |
| 1.3.6.1.4.1.33.17.4.1.1.3 | ColumnrepeaterSlotSegmentStatus | read-write | deprecated | Deprecated, no replacement. |
| 1.3.6.1.4.1.33.17.5 | NodexRepeaterSecurity | |||
| 1.3.6.1.4.1.33.17.5.1 | ScalarrepeaterSecurityState | read-write | mandatory | Controls whether security operation will be applied to all ports on the repeater. If security is not supported by the device, 'badValue' will be returned if th… |
| 1.3.6.1.4.1.33.17.5.2 | TablerepeaterSecurityPortTable | not-accessible | mandatory | Table of descriptive and status information about the ports. |
| 1.3.6.1.4.1.33.17.5.2.1 | RowrepeaterSecurityPortEntry | not-accessible | mandatory | An entry in the table, containing information about a port. |
| 1.3.6.1.4.1.33.17.5.2.1.1 | ColumnrepeaterSecurityPortUnicast | read-write | mandatory | The action to take when the destination address is unicast and does not have an entry in repeaterSecurityTable. If repeaterPortGroupIndex is equal to the group… |
| 1.3.6.1.4.1.33.17.5.2.1.2 | ColumnrepeaterSecurityPortMulticast | read-write | mandatory | The action to take when the destination address is multicast and does not have an entry in repeaterSecurityTable. If repeaterPortGroupIndex is equal to the gro… |
| 1.3.6.1.4.1.33.17.5.2.1.3 | ColumnrepeaterSecurityPortAllStatus | read-write | mandatory | Setting this field to invalid will delete all security addresses associated with this port. Setting this field to valid has no effect. If repeaterPortGroupInde… |
| 1.3.6.1.4.1.33.17.5.2.1.4 | ColumnrepeaterSecurityPortSecurityLearn | read-write | mandatory | Controls how the port will learn the destination addresses that can be sent to the port. If repeaterPortGroupIndex is equal to the group number of the agent, t… |
| 1.3.6.1.4.1.33.17.5.3 | TablerepeaterSecurityTable | not-accessible | mandatory | Table of security control for the ports. |
| 1.3.6.1.4.1.33.17.5.3.1 | RowrepeaterSecurityEntry | not-accessible | mandatory | An entry in the table, containing security information about a port. |
| 1.3.6.1.4.1.33.17.5.3.1.1 | ColumnrepeaterSecurityGroupIndex | read-only | mandatory | This variable identifies the group containing the security entry for which this entry contains information. The group ID may only be that of the target agent. … |
| 1.3.6.1.4.1.33.17.5.3.1.2 | ColumnrepeaterSecurityPortIndex | read-only | mandatory | This variable identifies the port containing the security entry for which this entry contains infromation. |
| 1.3.6.1.4.1.33.17.5.3.1.3 | ColumnrepeaterSecurityAddress | read-only | mandatory | This value will be compared to the destination address of all packets received on the port in applying the security action. |
| 1.3.6.1.4.1.33.17.5.3.1.4 | ColumnrepeaterSecurityStatus | read-write | mandatory | The status of the entry. Set to 'invalid' to remove the rule. |
| 1.3.6.1.4.1.33.17.5.3.1.5 | ColumnrepeaterSecurityAction | read-write | mandatory | The action to take when the destination address matches. |
| 1.3.6.1.4.1.33.17.5.4 | ScalarrepeaterSecurityGroupIndexShadow | read-write | mandatory | This variable identifies the group containing a port to which a security address is to be assigned. The group ID may only be that of the target agent. Specifyi… |
| 1.3.6.1.4.1.33.17.5.5 | ScalarrepeaterSecurityPortIndexShadow | read-write | mandatory | This variable identifies the port of a group to which a security address is to be assigned. |
| 1.3.6.1.4.1.33.17.5.6 | ScalarrepeaterSecurityAddressShadow | read-write | mandatory | This value contains the ethernet address which is to be added to the security address table for the port specified by repeaterSecurityGroupIndexShadow and repe… |
| 1.3.6.1.4.1.33.17.5.7 | ScalarrepeaterSecurityStatusShadow | read-write | mandatory | When read, this variable will always return 'ready'. When this variable is set to 'execute' the address specified by repeaterSecurityAddressShadow will be adde… |
| 1.3.6.1.4.1.33.17.5.8 | TablerepeaterSecurityGlobalAddressTable | not-accessible | mandatory | Table of ethernet addresses which are applied globally (intra Network 9000 chassis) to ports. |
| 1.3.6.1.4.1.33.17.5.8.1 | RowrepeaterSecurityGlobalAddressEntry | not-accessible | mandatory | An entry in the table containing information about a specific address. |
| 1.3.6.1.4.1.33.17.5.8.1.1 | ColumnrepeaterSecurityGlobalAddress | read-only | mandatory | This variable identifies the address. |
| 1.3.6.1.4.1.33.17.5.8.1.2 | ColumnrepeaterSecurityGlobalAddressStatus | read-write | mandatory | This variable represents the status of the entry. Setting this object (or any other writable object) to 'valid' will cause the row in the table to be created. … |
| 1.3.6.1.4.1.33.17.5.8.1.3 | ColumnrepeaterSecurityGlobalAddressAction | read-write | mandatory | This variable determines the action which is applied to the packet in the event of an address match. The packet is either passed untouched when set to 'pass', … |
| 1.3.6.1.4.1.33.17.5.9 | ScalarrepeaterSecurityGlobalDBID | read-only | mandatory | This variable contains the current version number of the global security database. |
| 1.3.6.1.4.1.33.17.5.10 | ScalarrepeaterSecurityGlobalSecurityAdminState | read-write | mandatory | This variable controls whether global security is enabled or disabled. Global security will not function unless repeaterSecurityState and this variable are bot… |
| 1.3.6.1.4.1.33.17.5.11 | ScalarrepeaterSecurityGlobalSecurityOperState | read-only | mandatory | This variable indicates the operational state of global security. If repeaterSecurityState is set to 'enabled' this variable will reflect the value of repeater… |
| 1.3.6.1.4.1.33.17.6 | NodexRepeaterRepeater | |||
| 1.3.6.1.4.1.33.17.6.1 | TablerepeaterRepeaterTable | not-accessible | mandatory | For repeaters that implement non-proxy management of logical repeaters, a table of descriptive and status information about a logical Ethernet repeater. |
| 1.3.6.1.4.1.33.17.6.1.1 | RowrepeaterRepeaterEntry | not-accessible | mandatory | An entry for a logical Ethernet repeater. |
| 1.3.6.1.4.1.33.17.6.1.1.1 | ColumnrepeaterRepeaterGroupIndex | read-only | mandatory | The slot of the chassis. |
| 1.3.6.1.4.1.33.17.6.1.1.2 | ColumnrepeaterRepeaterIndex | read-only | mandatory | The logical Ethernet repeater within the group. |
| 1.3.6.1.4.1.33.17.6.1.1.3 | ColumnrepeaterRepeaterSegment | read-write | mandatory | The Network 9000 Ethernet network segment to which the logical repeater is attached. |
| 1.3.6.1.4.1.33.17.6.1.1.4 | ColumnrepeaterRepeaterReports | read-write | mandatory | Control for whether statistical reports will be collected for this logical repeater. |
| 1.3.6.1.4.1.33.17.6.1.1.5 | ColumnrepeaterRepeaterCollisions | read-only | mandatory | The number of packet collisions detected on the Ethernet network segment to which this logical repeater is attached. |
| 1.3.6.1.4.1.33.17.6.1.1.6 | ColumnrepeaterRepeaterJabbers | read-only | mandatory | The number of Jabber events detected for this logical repeater. |
| 1.3.6.1.4.1.33.17.6.1.1.7 | ColumnrepeaterRepeaterSQE | read-only | mandatory | The number of SQE failure events detected for this logical repeater. |
| 1.3.6.1.4.1.33.17.6.1.1.8 | ColumnrepeaterRepeaterFifoOverflows | read-only | mandatory | The number of times the report FIFO was full when this logical repeater attemped to write a packet report. |
| 1.3.6.1.4.1.33.17.6.1.1.9 | ColumnrepeaterRepeaterZero | read-write | mandatory | Control for zeroing the logical repeater's counters. The agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting the v… |
| 1.3.6.1.4.1.33.17.6.1.1.10 | ColumnrepeaterRepeaterSinceZero | read-only | mandatory | The number of hundredths of a second since the counters for this logical repeater were last zeroed. This variable is set to zero when repeaterRepeaterZero is w… |
| 1.3.6.1.4.1.33.17.6.1.1.11 | ColumnrepeaterRepeaterSegmentsAllowed | read-only | mandatory | The list of segments to which this repeater can be attached. The OCTET STRING contains a bitmap, with a bit for 'none' and one bit for each segment, and enough… |
| 1.3.6.1.4.1.33.17.6.1.1.12 | ColumnrepeaterRepeaterTotalOctets | read-only | mandatory | This variable will reflect the total number of bytes that the repeater both received from and sent to the segment. Bytes in both good and error frames are coun… |
| 1.3.6.1.4.1.33.17.6.1.1.13 | ColumnrepeaterRepeaterTotalFrames | read-only | mandatory | This variable will reflect the total number of frames that the repeater both received from and sent to the segment. Both good and error frames are counted. |
| 1.3.6.1.4.1.33.17.6.1.1.14 | ColumnrepeaterRepeaterPercentUtilization | read-only | mandatory | This variable will reflect the percentage of a full ethernet load that this repeater has handled since last zeroed. The value is calculated as `(8(totalBytes +… |
| 1.3.6.1.4.1.33.17.7 | NodexRepeaterRedundancy | |||
| 1.3.6.1.4.1.33.17.7.1 | ScalarrepeaterRedundancyState | read-write | mandatory | This variable controls whether hub redundancy is enabled |
| 1.3.6.1.4.1.33.17.7.2 | TablerepeaterRedundancyGroupTable | not-accessible | mandatory | Table of descriptive and status information concerning hub redundancy groups. |
| 1.3.6.1.4.1.33.17.7.2.1 | RowrepeaterRedundancyGroupEntry | not-accessible | mandatory | An entry in the table containing information about a specific hub redundancy group. |
| 1.3.6.1.4.1.33.17.7.2.1.1 | ColumnrepeaterRedundancyGroupGroupIndex | read-only | mandatory | This variable identifies the group. |
| 1.3.6.1.4.1.33.17.7.2.1.2 | ColumnrepeaterRedundancyGroupStatus | read-write | mandatory | This variable represents the status of the entry. Setting this object (or any other writable object) to 'valid' will cause the row in the table to be created. … |
| 1.3.6.1.4.1.33.17.7.2.1.3 | ColumnrepeaterRedundancyGroupName | read-write | mandatory | This variable represents the definable name of the group. Prior to being set, this object will return the default name 'Groupn' where n is the value of repeate… |
| 1.3.6.1.4.1.33.17.7.2.1.4 | ColumnrepeaterRedundancyGroupAdminState | read-write | mandatory | This variable represents the desired state of the group. When this variable is set to 'enabled', the group will be activly monitored for integrity, and back- u… |
| 1.3.6.1.4.1.33.17.7.2.1.5 | ColumnrepeaterRedundancyGroupTestInterval | read-write | mandatory | This variable determines the rate at which testing is performed on the path which is currently active (repeaterRedundancyGroupOperPath) in order to determine i… |
| 1.3.6.1.4.1.33.17.7.2.1.6 | ColumnrepeaterRedundancyGroupRollbackAdminState | read-write | mandatory | This variable represents the desired state of path rollback. Path rollback is defined as the automatic testing and reactivation of higher priority paths. It sh… |
| 1.3.6.1.4.1.33.17.7.2.1.7 | ColumnrepeaterRedundancyGroupRollbackInterval | read-write | mandatory | This variable determines the rate at which rollback testing is performed. The value is in milliseconds. |
| 1.3.6.1.4.1.33.17.7.2.1.8 | ColumnrepeaterRedundancyGroupOperPath | read-only | mandatory | This variable represents the index of the path which is currently being used as the active path. This value may be used as the value for repeaterRedundancyPath… |
| 1.3.6.1.4.1.33.17.7.2.1.9 | ColumnrepeaterRedundancyGroupPathChanges | read-only | mandatory | The value of this variable represents the number of times that this group has changed paths. |
| 1.3.6.1.4.1.33.17.7.2.1.10 | ColumnrepeaterRedundancyGroupRollbackAttempts | read-only | mandatory | The value of this variable represents the number of times that the current path has been interrupted in interest of testing a higher priority path. |
| 1.3.6.1.4.1.33.17.7.2.1.11 | ColumnrepeaterRedundancyGroupZero | read-write | mandatory | This variable is used to zero all counters associated with a group. This variable when read will always read 'ready'. When set to 'execute', all counters assoc… |
| 1.3.6.1.4.1.33.17.7.2.1.12 | ColumnrepeaterRedundancyGroupSinceZero | read-only | mandatory | The value of this variable represents the number of seconds which have elapsed since the counters associated with the group have been zeroed. |
| 1.3.6.1.4.1.33.17.7.2.1.13 | ColumnrepeaterRedundancyGroupConfigStatus | read-only | mandatory | In order for a particular redundancy group to be used by the system, it must have at least one redundancy path defined. This variable indicates whether a redun… |
| 1.3.6.1.4.1.33.17.7.3 | TablerepeaterRedundancyPathTable | not-accessible | mandatory | Table of descriptive and status information concerning hub redundancy paths. |
| 1.3.6.1.4.1.33.17.7.3.1 | RowrepeaterRedundancyPathEntry | not-accessible | mandatory | An entry in the table containing information about a specific hub redundancy path. |
| 1.3.6.1.4.1.33.17.7.3.1.1 | ColumnrepeaterRedundancyPathGroupIndex | read-only | mandatory | This variable identifies the group. |
| 1.3.6.1.4.1.33.17.7.3.1.2 | ColumnrepeaterRedundancyPathPathIndex | read-only | mandatory | This variable identifies the path of the group. |
| 1.3.6.1.4.1.33.17.7.3.1.3 | ColumnrepeaterRedundancyPathStatus | read-write | mandatory | This variable represents the status of the entry. Setting this object (or any other writable object) to 'valid' will cause the row in the table to be created. … |
| 1.3.6.1.4.1.33.17.7.3.1.4 | ColumnrepeaterRedundancyPathSlot | read-write | mandatory | This variable represents the slot of the Network 9000 chassis which contains the repeater on which the path interface resides. |
| 1.3.6.1.4.1.33.17.7.3.1.5 | ColumnrepeaterRedundancyPathPort | read-write | mandatory | This variable represents the port of the repeater to which the path is connected. |
| 1.3.6.1.4.1.33.17.7.3.1.6 | ColumnrepeaterRedundancyPathPriority | read-write | mandatory | This variable represents the order of preferred priority for the path. Lower numbed paths are preferred over higher numbered paths. |
| 1.3.6.1.4.1.33.17.7.3.1.7 | ColumnrepeaterRedundancyPathActivate | read-write | mandatory | This variable is used to immediately make a specific path active. This variable when read will always read 'ready'. When set to 'execute', the selected path wi… |
| 1.3.6.1.4.1.33.17.7.3.1.8 | ColumnrepeaterRedundancyPathTimeout | read-write | mandatory | This variable represents the amount of time in milliseconds that the syatem will wait for test responses from targets on the path. |
| 1.3.6.1.4.1.33.17.7.3.1.9 | ColumnrepeaterRedundancyPathRetryCount | read-write | mandatory | This variable represents the number of times a test is retried on the path in the event of a timeout before the path is considered useless. |
| 1.3.6.1.4.1.33.17.7.3.1.10 | ColumnrepeaterRedundancyPathTestAttempts | read-only | mandatory | The value of this variable represents the number of times that an integrity test was performed on the path. |
| 1.3.6.1.4.1.33.17.7.3.1.11 | ColumnrepeaterRedundancyPathLastTestStatus | read-only | mandatory | This variable indicates the result of the last test of the path. 'notTested' indicates that the path has yet to be tested. 'responded' indicates that a target … |
| 1.3.6.1.4.1.33.17.7.3.1.12 | ColumnrepeaterRedundancyPathDisposition | read-write | mandatory | This variable controls the action that will be taken when a path is considered bad. 'disable' indicates that the path is to be disabled prior to switching to a… |
| 1.3.6.1.4.1.33.17.7.3.1.13 | ColumnrepeaterRedundancyPathConfigStatus | read-only | mandatory | In order for a particular redundancy path to be used by the system, it must have at least one target address and the slot and the port on which it originates d… |
| 1.3.6.1.4.1.33.17.7.3.1.14 | ColumnrepeaterRedundancyPathAdminState | read-write | mandatory | This variable represents the desired state of the path. When this variable is set to 'disabled' the path will not be used by the group. When set to 'enabled', … |
| 1.3.6.1.4.1.33.17.7.4 | TablerepeaterRedundancyAddressTable | not-accessible | mandatory | Table of descriptive and status information concerning hub redundancy target addresses. |
| 1.3.6.1.4.1.33.17.7.4.1 | RowrepeaterRedundancyAddressEntry | not-accessible | mandatory | An entry in the table containing information about a specific target address associated with a hub redundancy path. |
| 1.3.6.1.4.1.33.17.7.4.1.1 | ColumnrepeaterRedundancyAddressGroupIndex | read-only | mandatory | This variable identifies the group. |
| 1.3.6.1.4.1.33.17.7.4.1.2 | ColumnrepeaterRedundancyAddressPathIndex | read-only | mandatory | This variable identifies the path of the group. |
| 1.3.6.1.4.1.33.17.7.4.1.3 | ColumnrepeaterRedundancyAddressAddress | read-only | mandatory | This variable identifies the specific target address. |
| 1.3.6.1.4.1.33.17.7.4.1.4 | ColumnrepeaterRedundancyAddressStatus | read-write | mandatory | This variable represents the status of the entry. Setting this object (or any other writable object) to 'valid' will cause the row in the table to be created. … |
| 1.3.6.1.4.1.33.17.7.4.1.5 | ColumnrepeaterRedundancyAddressResponses | read-only | mandatory | This value of this variable represents the number of times this specific address has responded to a test attempt. |
| 1.3.6.1.4.1.33.17.7.4.1.6 | ColumnrepeaterRedundancyAddressLastTestStatus | read-only | mandatory | This variable indicates whether this particular address responded to the last test of the path. 'notTested' indicates that the path has yet to be tested. 'resp… |
| 1.3.6.1.4.1.33.19 | NodexBridge | |||
| 1.3.6.1.4.1.33.19.1 | NodexBridgeSystem | |||
| 1.3.6.1.4.1.33.19.1.1 | ScalarbridgeState | read-write | mandatory | Controls whether the bridge will perform bridging. |
| 1.3.6.1.4.1.33.19.1.2 | ScalarbridgeEarlyLoopState | read-write | mandatory | Controls whether the bridge will implement the early loop detection algorithm of restarting the Spanning Tree Protocol when a packet is received from a source … |
| 1.3.6.1.4.1.33.19.1.3 | ScalarbridgeEarlyLoopCount | read-only | mandatory | The number of times that an early loop was detected while the early loop state was enabled. |
| 1.3.6.1.4.1.33.19.1.4 | ScalarbridgeEarlyLoopAddress | read-only | mandatory | The last address to cause an early loop to be detected while the early loop state was enabled. |
| 1.3.6.1.4.1.33.19.1.5 | ScalarbridgeSpanningTreeState | read-write | mandatory | Controls whether the bridge will run the Spanning Tree Protocol. |
| 1.3.6.1.4.1.33.19.1.6 | ScalarbridgeFilterDiscardTimeout | read-write | mandatory | The number of seconds before an inactive filter is deleted. Learned filters become inactive when the use timeout (dot1dTpAgingTime) has been exceeded. |
| 1.3.6.1.4.1.33.19.1.7 | ScalarbridgeTopologyState | read-only | mandatory | Indicates whether the Spanning Tree Protocol's topology is stable or changing. |
| 1.3.6.1.4.1.33.19.1.8 | ScalarbridgeTopologyChangeAddr | read-only | mandatory | The ethernet address of the last bridge from which a Topology Change Notification packet was received. |
| 1.3.6.1.4.1.33.19.3 | NodexBridgeProtocol | |||
| 1.3.6.1.4.1.33.19.3.1 | ScalarbridgeProtocolFilterState | read-write | mandatory | Controls whether protocol filtering is active. |
| 1.3.6.1.4.1.33.19.3.2 | ScalarbridgeProtocolDefaultPriority | read-write | mandatory | Controls the default priority if no entry exists for the protocol. |
| 1.3.6.1.4.1.33.19.3.3 | TablebridgeProtocolTable | not-accessible | mandatory | A list of bridge protocol filters. |
| 1.3.6.1.4.1.33.19.3.3.1 | RowbridgeProtocolEntry | not-accessible | mandatory | Bridge protocol filter entry. |
| 1.3.6.1.4.1.33.19.3.3.1.1 | ColumnbridgeProtocolProtocol | read-only | mandatory | The protocol type associated with the entry. The value 65536 is for all 802.3 MAC frames. |
| 1.3.6.1.4.1.33.19.3.3.1.2 | ColumnbridgeProtocolName | read-write | mandatory | The name associated with the protocol. |
| 1.3.6.1.4.1.33.19.3.3.1.3 | ColumnbridgeProtocolPriority | read-write | mandatory | The priority or action to take with the protocol. |
| 1.3.6.1.4.1.33.19.3.3.1.4 | ColumnbridgeProtocolUses | read-only | mandatory | The number of times the filter has been used. |
| 1.3.6.1.4.1.33.19.3.3.1.5 | ColumnbridgeProtocolStatus | read-write | mandatory | The status of the protocol entry. Set to 'invalid' to remove the entry. |
| 1.3.6.1.4.1.33.19.4 | NodexBridgeFilter | |||
| 1.3.6.1.4.1.33.19.4.1 | TablebridgeFilterTable | not-accessible | mandatory | A list of bridge filters. |
| 1.3.6.1.4.1.33.19.4.1.1 | RowbridgeFilterEntry | not-accessible | mandatory | Bridge filter entry. |
| 1.3.6.1.4.1.33.19.4.1.1.1 | ColumnbridgeFilterForwardSubPort | read-write | mandatory | The unique identifier from which the address has been seen within the port. It is the DLCI for frame relay or VC for X25. |
| 1.3.6.1.4.1.33.19.4.1.1.2 | ColumnbridgeFilterUses | read-only | mandatory | The number of times the filter has been used for forwarding packets. |
| 1.3.6.1.4.1.33.19.4.1.1.3 | ColumnbridgeFilterAge | read-only | mandatory | The number of seconds that a learned filter has been active or inactive. This value has no meaning for non-learned filters. |
| 1.3.6.1.4.1.33.19.4.2 | TablebridgeFilterLinkTable | not-accessible | mandatory | Bridge filtering characteristics of all links. |
| 1.3.6.1.4.1.33.19.4.2.1 | RowbridgeFilterLinkEntry | not-accessible | mandatory | Bridge filtering characteristics of a specific link. |
| 1.3.6.1.4.1.33.19.4.2.1.1 | ColumnbridgeFilterLinkOverflowCam | read-write | mandatory | Identifies the number of extra entries in a hardware assist filter CAM that the user wants to have available to cover CAM entry overflow conditions. If filteri… |
| 1.3.6.1.4.1.33.20 | NodexX25 | |||
| 1.3.6.1.4.1.33.20.4 | TablexX25ChannelTable | not-accessible | mandatory | Entries of xX25Channel Table. |
| 1.3.6.1.4.1.33.20.4.1 | RowxX25ChannelEntry | not-accessible | mandatory | Entries of xX25ChannelTable. |
| 1.3.6.1.4.1.33.20.4.1.1 | ColumnxX25ChannelIndex | read-only | mandatory | The ifIndex value for the X.25 physical link. |
| 1.3.6.1.4.1.33.20.4.1.2 | ColumnxX25ChannelLowPVC | read-write | mandatory | Lowest PVC channel. Setting it to zero indicates 'none', and will also set the xX25ChannelHighPVC to zero. If set to a non-zero value and xX25ChannelHighPVC is… |
| 1.3.6.1.4.1.33.20.4.1.3 | ColumnxX25ChannelHighPVC | read-write | mandatory | Highest PVC channel. Setting it to 0 indicates none, and will also set the xX25ChannelLowPVC to 0. If set to a non-zero value and xX25ChannelLowPVC is zero, xX… |
| 1.3.6.1.4.1.33.20.4.1.4 | ColumnxX25ChannelNetwork | read-write | mandatory | The type of network being run. |
| 1.3.6.1.4.1.33.20.4.1.5 | ColumnxX25ChannelMaxPrecedence | read-write | mandatory | The maximum level of IP precedence supported. |
| 1.3.6.1.4.1.33.20.4.1.6 | ColumnxX25ChannelStdVersion | read-write | mandatory | The standard year supported by x25. Values are usually 1980 or 1984 (the default). |
| 1.3.6.1.4.1.33.20.6 | TablexX25VcCfgTable | not-accessible | mandatory | These objects contain information about the virtual circuit configuration in an X.25 PLE. These values are the configured values for circuits that may or may n… |
| 1.3.6.1.4.1.33.20.6.1 | RowxX25VcCfgEntry | not-accessible | mandatory | Entries of the xX25VcCfgTable. |
| 1.3.6.1.4.1.33.20.6.1.1 | ColumnxX25VcCfgIndex | read-only | mandatory | An arbitrary index value for the virtual circuit. |
| 1.3.6.1.4.1.33.20.6.1.2 | ColumnxX25VcCfgPartnerAddr | read-write | mandatory | Partner's X.121 Address. |
| 1.3.6.1.4.1.33.20.6.1.3 | ColumnxX25VcCfgInterfaceIndex | read-write | mandatory | ifIndex of ITouch logical interface associated with this VC. |
| 1.3.6.1.4.1.33.20.6.1.4 | ColumnxX25VcCfgLinkIndex | read-write | mandatory | ifIndex of physical link on which this VC resides. |
| 1.3.6.1.4.1.33.20.6.1.5 | ColumnxX25VcCfgProtocol | read-write | mandatory | Protocol which is being encapsulated by this VC. |
| 1.3.6.1.4.1.33.20.6.1.6 | ColumnxX25VcCfgEncapsulation | read-write | mandatory | Encapsulation method used by this VC. |
| 1.3.6.1.4.1.33.20.6.1.7 | ColumnxX25VcCfgPvc | read-write | mandatory | Channel number if VC is a PVC, else 0. The value must be in the range of xX25ChannelLowPVC to xX25ChannelHighPVC |
| 1.3.6.1.4.1.33.20.6.1.8 | ColumnxX25VcCfgPartnerIpAddress | read-write | mandatory | IP address of the partner over this VC. This must be configured if IP packets will not be MAC-encapsulated. |
| 1.3.6.1.4.1.33.20.6.1.9 | ColumnxX25VcCfgClearFacilities | read-write | mandatory | Control to clear the VC call facilities string. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the … |
| 1.3.6.1.4.1.33.20.6.1.10 | ColumnxX25VcCfgStatus | read-write | mandatory | Setting to 'invalid' removes this VC from the table. If 'valid', setting to 'valid' has no effect, otherwise it creates an entry. |
| 1.3.6.1.4.1.33.20.7 | TablexX25LinkTable | not-accessible | mandatory | These objects contain information about the configuration of the X.25 physical links necessary for the ITouch Bridge/Router. Unless otherwise noted, changes to… |
| 1.3.6.1.4.1.33.20.7.1 | RowxX25LinkEntry | not-accessible | mandatory | Entries of the xX25LinkTable. |
| 1.3.6.1.4.1.33.20.7.1.1 | ColumnxX25LinkIndex | read-only | mandatory | The ifIndex value for a ITouch physical link. |
| 1.3.6.1.4.1.33.20.7.1.2 | ColumnxX25LinkRRDelay | read-write | mandatory | Number of packets received before an RR will be sent. The value must be less than the xX25CallParmInWindowSize. Modifying this object does not require the X.25… |
| 1.3.6.1.4.1.33.20.7.1.3 | ColumnxX25LinkIdleTimeout | read-write | mandatory | Length of time in minutes that a virtual circuit may be idle before the circuit will be cleared. Modifying this object does not require the X.25 physical link … |
| 1.3.6.1.4.1.33.20.7.1.4 | ColumnxX25LinkHoldDownTimer | read-write | mandatory | Length of time in minutes after a virtual circuit has been cleared before it may make a call again. Modifying this object does not require the X.25 physical li… |
| 1.3.6.1.4.1.33.20.7.1.5 | ColumnxX25LinkAccUncfgCalls | read-write | mandatory | Indicates whether unconfigured, non-reverse charged calls will be accepted. Modifying this object does not require the X.25 physical link to be restarted. |
| 1.3.6.1.4.1.33.20.7.1.6 | ColumnxX25LinkDefWindSize | read-write | mandatory | Default packet level window size for this link. |
| 1.3.6.1.4.1.33.20.7.1.7 | ColumnxX25LinkMaxWindSize | read-write | mandatory | Maximum packet level window size for this link. |
| 1.3.6.1.4.1.33.20.7.1.8 | ColumnxX25LinkDefPktSize | read-write | mandatory | Default packet size for this link. |
| 1.3.6.1.4.1.33.20.7.1.9 | ColumnxX25LinkDefThrptClassIn | read-write | mandatory | Default input throughput class for this link. |
| 1.3.6.1.4.1.33.20.7.1.10 | ColumnxX25LinkDefThrptClassOut | read-write | mandatory | Default output throughput class for this link. |
| 1.3.6.1.4.1.33.20.7.1.11 | ColumnxX25LinkDefThrptClassInMsk | read-write | deprecated | Default incoming throughput class mask for this link. |
| 1.3.6.1.4.1.33.20.7.1.12 | ColumnxX25LinkDefThrptClassOutMsk | read-write | deprecated | Default outgoing throughput class mask for this link. |
| 1.3.6.1.4.1.33.20.7.1.13 | ColumnxX25LinkFlowCtrlNeg | read-write | mandatory | Indicates whether flow control negotiation will be performed on this link. |
| 1.3.6.1.4.1.33.20.7.1.14 | ColumnxX25LinkThrptClassNeg | read-write | mandatory | Indicates whether throughput class negotiation will be performed on this link. |
| 1.3.6.1.4.1.33.20.7.1.15 | ColumnxX25LinkICallBarred | read-write | mandatory | Indicates whether incoming calls are barred on this link. |
| 1.3.6.1.4.1.33.20.7.1.16 | ColumnxX25LinkOCallBarred | read-write | mandatory | Indicates whether outgoing calls are barred on this link. |
| 1.3.6.1.4.1.33.20.7.1.17 | ColumnxX25LinkOneOut | read-write | mandatory | Indicates whether the link supports one way outgoing channels. |
| 1.3.6.1.4.1.33.20.7.1.18 | ColumnxX25LinkOneIn | read-write | mandatory | Indicates whether the link supports one way incoming channels. |
| 1.3.6.1.4.1.33.20.7.1.19 | ColumnxX25LinkRevChargeAcc | read-write | mandatory | Indicates whether reverse charge acceptance may be configured on this link. |
| 1.3.6.1.4.1.33.20.7.1.20 | ColumnxX25LinkLocalChargePrevent | read-write | mandatory | Indicates whether local charge prevention may be configured on the link. |
| 1.3.6.1.4.1.33.20.7.1.21 | ColumnxX25LinkRpoa | read-write | mandatory | Indicates whether RPOA may be configured on the link. |
| 1.3.6.1.4.1.33.20.7.1.22 | ColumnxX25LinkNui | read-write | mandatory | Indicates whether NUI may be configured on the link. |
| 1.3.6.1.4.1.33.20.7.1.23 | ColumnxX25LinkMaxPacketSize | read-write | mandatory | Maximum size of packets on the link. |
| 1.3.6.1.4.1.33.20.7.1.24 | ColumnxX25LinkInsertCallingAddr | read-write | mandatory | Indicates whether the caller's X.121 address should be inserted into the the call request packet. |
| 1.3.6.1.4.1.33.20.7.1.25 | ColumnxX25LinkDefaultInterface | read-write | mandatory | The ITouch logical ifIndex to which new SVCs should be attached, when 'accept unconfigured calls' is enabled. A value of zero means 'create a new interface'. |
| 1.3.6.1.4.1.33.21 | NodexApple | |||
| 1.3.6.1.4.1.33.21.1 | NodexAppleSystem | |||
| 1.3.6.1.4.1.33.21.1.1 | ScalarappleState | read-write | mandatory | Controls whether the router will perform AppleTalk routing. |
| 1.3.6.1.4.1.33.21.1.2 | ScalarappleStatus | read-only | mandatory | Indicates whether the router is performing AppleTalk routing. |
| 1.3.6.1.4.1.33.21.1.3 | ScalarappleStatusIf | read-only | mandatory | The ifIndex of the bad interface if appleStatus is 'badConfig'. |
| 1.3.6.1.4.1.33.21.2 | NodexApplePort | |||
| 1.3.6.1.4.1.33.21.2.1 | TableapplePortTable | not-accessible | mandatory | Table of fields indexed by interface. |
| 1.3.6.1.4.1.33.21.2.1.1 | RowapplePortEntry | not-accessible | mandatory | A particular entry. |
| 1.3.6.1.4.1.33.21.2.1.1.1 | ColumnapplePortIndex | read-only | mandatory | The index of the interface; same as IfIndex. |
| 1.3.6.1.4.1.33.21.2.1.1.2 | ColumnapplePortProtocolPriority | read-write | mandatory | This value defines the priority at which all Apple routed packets will be placed on the WAN output queue. |
| 1.3.6.1.4.1.33.21.2.1.1.3 | ColumnapplePortArpInterval | read-write | mandatory | The interval at which ARP messages should be sent during the process of selecting a network address. |
| 1.3.6.1.4.1.33.21.2.1.1.4 | ColumnapplePortArpRetransmitCount | read-write | mandatory | The number of ARP messages that should be sent during the process of selecting a network address. |
| 1.3.6.1.4.1.33.21.2.1.1.5 | ColumnapplePortChecksum | read-write | mandatory | Controls whether checksums are generated on all DDP packets sent out the interface. |
| 1.3.6.1.4.1.33.21.2.1.1.6 | ColumnapplePortPacketsIn | read-only | mandatory | The number of AppleTalk packets received on this interface. |
| 1.3.6.1.4.1.33.21.2.1.1.7 | ColumnapplePortPacketsOut | read-only | mandatory | The number of AppleTalk packets transmitted on this interface. |
| 1.3.6.1.4.1.33.21.2.1.1.8 | ColumnapplePortForwardsIn | read-only | mandatory | The number of AppleTalk packets received on this interface which were not addressed to this router. |
| 1.3.6.1.4.1.33.21.2.1.1.9 | ColumnapplePortForwardsOut | read-only | mandatory | The number of AppleTalk packets transmitted on this interface which were not originated by this router. |
| 1.3.6.1.4.1.33.21.2.1.1.10 | ColumnapplePortNetAddress | read-only | mandatory | The actual address used by this port. |
| 1.3.6.1.4.1.33.21.2.1.1.11 | ColumnapplePortNetStart | read-only | mandatory | The start of the actual network range used by this port. |
| 1.3.6.1.4.1.33.21.2.1.1.12 | ColumnapplePortNetEnd | read-only | mandatory | The end of the actual network range used by this port. |
| 1.3.6.1.4.1.33.21.2.1.1.13 | ColumnapplePortErrors | read-only | mandatory | The number of AppleTalk packets received in error. |
| 1.3.6.1.4.1.33.21.2.1.1.14 | ColumnapplePortLastError | read-only | mandatory | The type of the most recent error counted in applePortErrors. A value of zero means no error. |
| 1.3.6.1.4.1.33.21.2.1.1.15 | ColumnapplePortLastErrorTime | read-only | mandatory | The value of sysUptime when applePortLastError last occured. |
| 1.3.6.1.4.1.33.21.2.1.1.16 | ColumnapplePortLastErrorData | read-only | mandatory | The first 22 bytes of the packet from applePortLastError. |
| 1.3.6.1.4.1.33.21.2.1.1.17 | ColumnapplePortBringBackTime | read-write | mandatory | The number of seconds to shut down an interface while waiting for a manager-initiated configuration change to propagate. |
| 1.3.6.1.4.1.33.21.2.1.1.18 | ColumnapplePortUseNeighborNotify | read-write | mandatory | Controls generation of neighbor notify messages when an interface is disabled or system is shut down. |
| 1.3.6.1.4.1.33.21.2.1.1.19 | ColumnapplePortRouterType | read-write | mandatory | Type of router operation over this port. |
| 1.3.6.1.4.1.33.21.2.2 | TableapplePortZoneTable | not-accessible | mandatory | Table of fields indexed by interface and zone. |
| 1.3.6.1.4.1.33.21.2.2.1 | RowapplePortZoneEntry | not-accessible | mandatory | A particular entry. |
| 1.3.6.1.4.1.33.21.2.2.1.1 | ColumnapplePortZoneIndex | read-only | mandatory | The index of the interface; same as IfIndex. |
| 1.3.6.1.4.1.33.21.2.2.1.2 | ColumnapplePortZoneName | read-only | mandatory | The name of the zone. |
| 1.3.6.1.4.1.33.21.2.2.1.3 | ColumnapplePortZoneStatus | read-write | mandatory | The status of the entry. Set to 'invalid' to remove the entry. |
| 1.3.6.1.4.1.33.21.3 | NodexApplePolicy | |||
| 1.3.6.1.4.1.33.21.3.1 | TableapplePortExportTable | not-accessible | mandatory | Table of fields indexed by interface and zone. |
| 1.3.6.1.4.1.33.21.3.1.1 | RowapplePortExportEntry | not-accessible | mandatory | A particular entry. |
| 1.3.6.1.4.1.33.21.3.1.1.1 | ColumnapplePortExportIndex | read-only | mandatory | The index of the interface; same as IfIndex. |
| 1.3.6.1.4.1.33.21.3.1.1.2 | ColumnapplePortExportZone | read-only | mandatory | The name of the zone. |
| 1.3.6.1.4.1.33.21.3.1.1.3 | ColumnapplePortExportName | read-only | mandatory | The name of the name. |
| 1.3.6.1.4.1.33.21.3.1.1.4 | ColumnapplePortExportType | read-only | mandatory | The name of the type. |
| 1.3.6.1.4.1.33.21.3.1.1.5 | ColumnapplePortExportAction | read-write | mandatory | Control whether the data will be hidden or advertised. |
| 1.3.6.1.4.1.33.21.3.1.1.6 | ColumnapplePortExportStatus | read-write | mandatory | The status of the entry. Set to 'invalid' to remove the entry. |
| 1.3.6.1.4.1.33.21.3.2 | TableapplePortImportTable | not-accessible | mandatory | Table of fields indexed by interface and zone. |
| 1.3.6.1.4.1.33.21.3.2.1 | RowapplePortImportEntry | not-accessible | mandatory | A particular entry. |
| 1.3.6.1.4.1.33.21.3.2.1.1 | ColumnapplePortImportIndex | read-only | mandatory | The index of the interface; same as IfIndex. |
| 1.3.6.1.4.1.33.21.3.2.1.2 | ColumnapplePortImportZone | read-only | mandatory | The name of the zone. |
| 1.3.6.1.4.1.33.21.3.2.1.3 | ColumnapplePortImportName | read-only | mandatory | The name of the name. |
| 1.3.6.1.4.1.33.21.3.2.1.4 | ColumnapplePortImportType | read-only | mandatory | The name of the type. |
| 1.3.6.1.4.1.33.21.3.2.1.5 | ColumnapplePortImportAction | read-write | mandatory | Control whether the data will be discarded or accepted. |
| 1.3.6.1.4.1.33.21.3.2.1.6 | ColumnapplePortImportStatus | read-write | mandatory | The status of the entry. Set to 'invalid' to remove the entry. |
| 1.3.6.1.4.1.33.21.4 | NodexAppleNbp | |||
| 1.3.6.1.4.1.33.21.4.1 | TableappleNbpTable | not-accessible | mandatory | Table of fields indexed by interface and zone. |
| 1.3.6.1.4.1.33.21.4.1.1 | RowappleNbpEntry | not-accessible | mandatory | A particular entry. |
| 1.3.6.1.4.1.33.21.4.1.1.1 | ColumnappleNbpZone | read-only | mandatory | The name of the zone. |
| 1.3.6.1.4.1.33.21.4.1.1.2 | ColumnappleNbpName | read-only | mandatory | The name of the name. |
| 1.3.6.1.4.1.33.21.4.1.1.3 | ColumnappleNbpType | read-only | mandatory | The name of the type. |
| 1.3.6.1.4.1.33.21.4.1.1.4 | ColumnappleNbpNode | read-only | mandatory | The address of the node who offers the service associated with this entry. |
| 1.3.6.1.4.1.33.21.4.1.1.5 | ColumnappleNbpSocket | read-only | mandatory | The socket of the service associated with this entry. The value 0 means no socket. |
| 1.3.6.1.4.1.33.21.5 | NodexAppleTraffic | |||
| 1.3.6.1.4.1.33.21.5.1 | ScalarappleTrafficSort | read-write | mandatory | Setting to EXECUTE causes the most recent traffic information to be sorted into the appleTrafficTable. The sorting precedence is: decreasing percentage, increa… |
| 1.3.6.1.4.1.33.21.5.2 | TableappleTrafficTable | not-accessible | mandatory | A list of traffic entries, sorted in the order specified by appleTrafficSort. |
| 1.3.6.1.4.1.33.21.5.2.1 | RowappleTrafficEntry | not-accessible | mandatory | Parameter values for an Filter filter. |
| 1.3.6.1.4.1.33.21.5.2.1.1 | ColumnappleTrafficIndex | read-only | mandatory | Identification of a traffic entry. |
| 1.3.6.1.4.1.33.21.5.2.1.2 | ColumnappleTrafficPercent | read-only | mandatory | The percent of total traffic that this traffic entryrepresents, in tenths of a percent. |
| 1.3.6.1.4.1.33.21.5.2.1.3 | ColumnappleTrafficDst | read-only | mandatory | The destination to which the traffic entry applies. |
| 1.3.6.1.4.1.33.21.5.2.1.4 | ColumnappleTrafficSrc | read-only | mandatory | The source to which the traffic entry applies. |
| 1.3.6.1.4.1.33.21.5.2.1.5 | ColumnappleTrafficIntf | read-only | mandatory | The inbound interface to which the traffic entry applies. |
| 1.3.6.1.4.1.33.21.5.3 | ScalarappleTrafficMonitoring | read-write | mandatory | Controls whether internet traffic information will be recorded. |
| 1.3.6.1.4.1.33.21.6 | NodexAppleRemoteAccess | |||
| 1.3.6.1.4.1.33.21.6.1 | ScalararapPassword | read-write | mandatory | The server's ARAP password. To increase security, Gets of this object return the NULL string. |
| 1.3.6.1.4.1.33.21.6.2 | ScalararapDefaultZoneName | read-write | mandatory | The name of the AppleTalk zone that the server should try to choose at boot time. |
| 1.3.6.1.4.1.33.21.6.3 | TablearapPortTable | not-accessible | mandatory | A list of ARAP port entries. |
| 1.3.6.1.4.1.33.21.6.3.1 | RowarapPortEntry | not-accessible | mandatory | ARAP parameter values for a port. |
| 1.3.6.1.4.1.33.21.6.3.1.1 | ColumnarapPortEnabled | read-write | mandatory | Indicates if ARAP connections are allowed on this port. |
| 1.3.6.1.4.1.33.21.6.3.1.2 | ColumnarapPortZoneAccess | read-write | mandatory | Indicates the AppleTalk zones that ARAP connections on this port may access: none, local, all, or named zone. |
| 1.3.6.1.4.1.33.21.6.3.1.3 | ColumnarapPortZoneName | read-write | mandatory | If this port's arapPortZoneAccess field indicates a named zone, this field contains the zone name. |
| 1.3.6.1.4.1.33.21.6.3.1.4 | ColumnarapPortMaxConnectTime | read-write | mandatory | Maximum number of minutes a single ARAP connection may exist on the port before a server initiated disconnect. To set no limit on the amount of time that an AR… |
| 1.3.6.1.4.1.33.21.6.3.1.5 | ColumnarapPortGuestLoginsOk | read-write | mandatory | Indicates if 'Guest' logins (with no password) are allowed on the port. |
| 1.3.6.1.4.1.33.21.6.3.1.6 | ColumnarapPortTimeConnected | read-only | mandatory | Indicates the number of minutes the current ARAP connection has been established on the port, rounded up to the nearest minute. Gets return -1 if no ARAP user … |
| 1.3.6.1.4.1.33.21.6.3.1.7 | ColumnarapPortTimeRemaining | read-write | mandatory | Indicates the number of minutes the current ARAP connection may remain on the port before a server initiated disconnect will occur, rounded up to the nearest m… |
| 1.3.6.1.4.1.33.23 | NodexFrameRelay | |||
| 1.3.6.1.4.1.33.23.1 | TablexFrCircuitTable | not-accessible | mandatory | A table containing iTouch extensions to the standard Frame Relay Circuit table. |
| 1.3.6.1.4.1.33.23.1.1 | RowxFrCircuitEntry | not-accessible | mandatory | Entry parameters. |
| 1.3.6.1.4.1.33.23.1.1.1 | ColumnxFrCircuitIf | read-write | mandatory | The ifIndex value of the corresponding ifEntry, that is, the interface to which the DLCI is attached. |
| 1.3.6.1.4.1.33.24 | NodexLink | |||
| 1.3.6.1.4.1.33.24.1 | NodexLinkBasic | |||
| 1.3.6.1.4.1.33.24.1.1 | TablelinkTable | not-accessible | mandatory | A list of links. |
| 1.3.6.1.4.1.33.24.1.1.1 | RowlinkEntry | not-accessible | mandatory | Link entry. |
| 1.3.6.1.4.1.33.24.1.1.1.1 | ColumnlinkNoBuffers | read-only | mandatory | The number of packets discarded because of lack of buffers. |
| 1.3.6.1.4.1.33.24.1.1.1.2 | ColumnlinkDelayExceeded | read-only | mandatory | The number of packets discarded because they were held to long. |
| 1.3.6.1.4.1.33.24.1.1.1.3 | ColumnlinkOutputQFull | read-only | mandatory | The number of packets discarded because the output queue was full. |
| 1.3.6.1.4.1.33.24.1.1.1.4 | ColumnlinkDownTime | read-only | mandatory | Total number of seconds that the link has been down. |
| 1.3.6.1.4.1.33.24.1.1.1.5 | ColumnlinkDownCount | read-only | mandatory | Number of times that the link has been down. |
| 1.3.6.1.4.1.33.24.1.1.1.6 | ColumnlinkDownLastStart | read-only | mandatory | Value of sysUpTime when the link last went down. If the link is up the value is 0. |
| 1.3.6.1.4.1.33.24.1.1.1.7 | ColumnlinkStatus | read-only | mandatory | The status of the link |
| 1.3.6.1.4.1.33.24.1.1.1.8 | ColumnlinkLostBuffers | read-only | mandatory | Number of packets discarded because of lost buffers |
| 1.3.6.1.4.1.33.24.1.2 | TablelinkResourceTable | not-accessible | mandatory | A list of link resources. |
| 1.3.6.1.4.1.33.24.1.2.1 | RowlinkResourceEntry | not-accessible | mandatory | link entry. |
| 1.3.6.1.4.1.33.24.1.2.1.1 | ColumnlinkResourceType | read-only | mandatory | The resource type. |
| 1.3.6.1.4.1.33.24.1.2.1.2 | ColumnlinkResourceCurrent | read-only | mandatory | The current percent of the resource used. |
| 1.3.6.1.4.1.33.24.1.2.1.3 | ColumnlinkResourceHigh | read-only | mandatory | The highest percent of the resource used. |
| 1.3.6.1.4.1.33.24.1.2.1.4 | ColumnlinkResourceAverage | read-only | mandatory | The average percent of the resource used. |
| 1.3.6.1.4.1.33.24.3 | NodexWan | |||
| 1.3.6.1.4.1.33.24.3.1 | TablewanTable | not-accessible | mandatory | A list of WANs. |
| 1.3.6.1.4.1.33.24.3.1.1 | RowwanEntry | not-accessible | mandatory | WAN entry. |
| 1.3.6.1.4.1.33.24.3.1.1.1 | ColumnwanProtocol | read-write | mandatory | Controls the protocol run on the link, changes ifType, typically to 'other'. |
| 1.3.6.1.4.1.33.24.3.1.1.2 | ColumnwanCompressionAdminStatus | read-write | mandatory | Controls whether link compression will be run if the link is running the xyplex protocol. Auto will enable compression for links slower than 67000. |
| 1.3.6.1.4.1.33.24.3.1.1.3 | ColumnwanMaxForwardDelay | read-write | mandatory | The number of milliseconds that a packet may be held on the Wan link before it will be discarded. The value 0 indicates no limit. |
| 1.3.6.1.4.1.33.24.3.1.1.4 | ColumnwanMaxMultiForwardDelay | read-write | mandatory | The number of milliseconds that a multicast packet may be held on the Wan link before it will be discarded. The value 0 indicates no delay. |
| 1.3.6.1.4.1.33.24.3.1.1.5 | ColumnwanAdminSpeed | read-write | mandatory | The speed that the software should use for the wan link. The value 0 indicates that the measured speed should be used. |
| 1.3.6.1.4.1.33.24.3.1.1.6 | ColumnwanCompressionOperStatus | read-only | mandatory | If the link is running the Xyplex protocol, indicates whether link compression is running. |
| 1.3.6.1.4.1.33.25 | NodexConcentrator | |||
| 1.3.6.1.4.1.33.25.1 | ScalarconcentratorMode | read-write | mandatory | This variable controls the ring mode of the chassis. |
| 1.3.6.1.4.1.33.25.2 | ScalarconcentratorManagement | read-write | mandatory | This variable controls the ability to manage token ring concentrators. |
| 1.3.6.1.4.1.33.25.3 | ScalarconcentratorBuildTopology | read-write | mandatory | This variable causes the chassis token ring topology database to be constructed. |
| 1.3.6.1.4.1.33.25.4 | ScalarconcentratorTopologyLastBuild | read-only | mandatory | This variable contains the value of sysUpTime at the time the chassis token ring topology database was last constructed. |
| 1.3.6.1.4.1.33.25.5 | ScalarconcentratorChassisRingDefaults | read-write | mandatory | This variable causes the chassis ring area of NVS to be set to defaults. |
| 1.3.6.1.4.1.33.25.6 | TableconcentratorSlotTable | not-accessible | mandatory | Table of descriptive and status information about a Token Ring Concentrator. |
| 1.3.6.1.4.1.33.25.6.1 | RowconcentratorSlotEntry | not-accessible | mandatory | An entry in the table containing information about a specific concentrator. |
| 1.3.6.1.4.1.33.25.6.1.1 | ColumnconcentratorSlotIndex | read-only | mandatory | This variable identifies the slot of the chassis. |
| 1.3.6.1.4.1.33.25.6.1.2 | ColumnconcentratorSlotIOType | read-only | mandatory | This variable represents the type of the I/O card. |
| 1.3.6.1.4.1.33.25.6.1.3 | ColumnconcentratorSlotIOFirmwareVersion | read-only | mandatory | This variable represents the revision level of the firmware on the I/O card. |
| 1.3.6.1.4.1.33.25.6.1.4 | ColumnconcentratorSlotIOOperStatus | read-only | mandatory | This variable represents the current operating status of the I/O card. |
| 1.3.6.1.4.1.33.25.6.1.5 | ColumnconcentratorSlotUptime | read-only | mandatory | This variable contains the value of sysUpTime at the time the concentrator was last reset. |
| 1.3.6.1.4.1.33.25.6.1.6 | ColumnconcentratorSlotNumPorts | read-only | mandatory | This variable represents the number of Token Ring ports supported by the concentrator. |
| 1.3.6.1.4.1.33.25.7 | TableconcentratorSlotRingTable | not-accessible | mandatory | Table of descriptive and status information about the rings of a controller. |
| 1.3.6.1.4.1.33.25.7.1 | RowconcentratorSlotRingEntry | not-accessible | mandatory | An entry in the table containing information about a specific ring. |
| 1.3.6.1.4.1.33.25.7.1.1 | ColumnconcentratorSlotSlotIndex | read-only | mandatory | This variable identifies the slot of the chassis. |
| 1.3.6.1.4.1.33.25.7.1.2 | ColumnconcentratorSlotRingIndex | read-only | mandatory | This variable identifies the ring within the slot. |
| 1.3.6.1.4.1.33.25.7.1.3 | ColumnconcentratorSlotRingAdminName | read-write | mandatory | This variable represents the user defined name of the ring. |
| 1.3.6.1.4.1.33.25.7.1.4 | ColumnconcentratorSlotRingAdminSpeed | read-write | mandatory | This variable represents the user defined speed of the ring. |
| 1.3.6.1.4.1.33.25.7.1.5 | ColumnconcentratorSlotRingAdminState | read-write | mandatory | This variable defines whether the slot ring is to be inserted into the defined chassis ring or is to be isolated. |
| 1.3.6.1.4.1.33.25.7.1.6 | ColumnconcentratorSlotRingZero | read-write | mandatory | This variable is used to control the slot ring's counters. The agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. |
| 1.3.6.1.4.1.33.25.7.1.7 | ColumnconcentratorSlotRingSinceZero | read-only | mandatory | This variable reflects the number of time ticks since the counters were last zeroed. This variable is set to zero when concentratoSlotRingZero is written with … |
| 1.3.6.1.4.1.33.25.7.1.8 | ColumnconcentratorSlotRingChassisRing | read-write | mandatory | This variable represents the chassis ring into which the slot ring is to be inserted if it is to be inserted. |
| 1.3.6.1.4.1.33.25.7.1.9 | ColumnconcentratorSlotRingOperName | read-only | mandatory | This variable represents the name currently being used to identify the slot ring. If inserted, this name will be the user defined name of the chassis ring into… |
| 1.3.6.1.4.1.33.25.7.1.10 | ColumnconcentratorSlotRingOperSpeed | read-only | mandatory | This variable represents the current speed of the slot ring. If inserted, this speed will be the user defined speed of the chassis ring into which it is insert… |
| 1.3.6.1.4.1.33.25.7.1.11 | ColumnconcentratorSlotRingOperState | read-only | mandatory | This variable indicates whether the slot ring is inserted into the defined chassis ring or is isolated. |
| 1.3.6.1.4.1.33.25.7.1.12 | ColumnconcentratorSlotRingChassisRingsAllowed | read-only | mandatory | The list of chassis rings into which this slot ring may be inserted. The OCTET STRING contains a bit map, with a bit for 'none' (indicating it may be isolated)… |
| 1.3.6.1.4.1.33.25.8 | TableconcentratorChassisRingTable | not-accessible | mandatory | Table of descriptive and status information about the rings of a the chassis. |
| 1.3.6.1.4.1.33.25.8.1 | RowconcentratorChassisRingEntry | not-accessible | mandatory | An entry in the table containing information about a specific ring. |
| 1.3.6.1.4.1.33.25.8.1.1 | ColumnconcentratorChassisRingIndex | read-only | mandatory | This variable identifies the ring of the chassis. |
| 1.3.6.1.4.1.33.25.8.1.2 | ColumnconcentratorChassisRingName | read-write | mandatory | This variable represents the name of the ring. All segments of a given chassis ring will have the same base name, All segment of that ring will appear as 'base… |
| 1.3.6.1.4.1.33.25.8.1.3 | ColumnconcentratorChassisRingSpeed | read-write | mandatory | This variable indicates the speed of the ring segment. All segments of a given chassis ring are at the same speed. |
| 1.3.6.1.4.1.33.25.8.1.4 | ColumnconcentratorChassisRingTopologyChanges | read-only | mandatory | This variable reflects the number of times the topology has changed for this ring. This variable is set to zero when concentratorChassisRingZero is written wit… |
| 1.3.6.1.4.1.33.25.8.1.5 | ColumnconcentratorChassisRingZero | read-write | mandatory | This variable is used to control the ring's counters. The agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. |
| 1.3.6.1.4.1.33.25.8.1.6 | ColumnconcentratorChassisRingSinceZero | read-only | mandatory | This variable reflects the number of time ticks since the counters were last zeroed. This variable is set to zero when concentratoChassisRingZero is written wi… |
| 1.3.6.1.4.1.33.25.9 | TableconcentratorChassisRingTopologyTable | not-accessible | mandatory | Table of descriptive and status information about the segments of the chassis rings. |
| 1.3.6.1.4.1.33.25.9.1 | RowconcentratorChassisRingTopologyEntry | not-accessible | mandatory | An entry in the table containing information about a specific ring segment. |
| 1.3.6.1.4.1.33.25.9.1.1 | ColumnconcentratorChassisRingTopologySlotIndex | read-only | mandatory | This variable identifies a slot number that is included in the ring segment. |
| 1.3.6.1.4.1.33.25.9.1.2 | ColumnconcentratorChassisRingTopologyRingIndex | read-only | mandatory | This variable identifies the ring of the chassis. |
| 1.3.6.1.4.1.33.25.9.1.3 | ColumnconcentratorChassisRingTopologyWrapUp | read-only | mandatory | This variable represents the upper wrap state for the chassis ring which passes through this slot. By setting this variable to Wrap, the user can create a segm… |
| 1.3.6.1.4.1.33.25.9.1.4 | ColumnconcentratorChassisRingTopologyWrapDown | read-only | mandatory | This variable represents the lower wrap state for the chassis ring which passes through this slot. By setting this variable to Wrap, the user can create a segm… |
| 1.3.6.1.4.1.33.25.9.1.5 | ColumnconcentratorChassisRingTopologyUpState | read-only | mandatory | This variable represents the type of upper wrap for the chassis ring which passes through this slot. |
| 1.3.6.1.4.1.33.25.9.1.6 | ColumnconcentratorChassisRingTopologyDownState | read-only | mandatory | This variable represents the type of lower wrap for the chassis ring which passes through this slot. |
| 1.3.6.1.4.1.33.25.9.1.7 | ColumnconcentratorChassisRingTopologySegment | read-only | mandatory | This variable represents the segment number for the chassis ring which passes through this slot. |
| 1.3.6.1.4.1.33.25.9.1.8 | ColumnconcentratorChassisRingTopologyName | read-only | mandatory | This variable represents the name of the ring segment. The ring segment name is the base ring name with '-segment number' appended to the end. |
| 1.3.6.1.4.1.33.25.9.1.9 | ColumnconcentratorChassisRingTopologySpeed | read-only | mandatory | This variable indicates the speed of the ring segment. All segments of a given chassis ring are at the same speed as the parent ring. |
| 1.3.6.1.4.1.33.25.9.1.10 | ColumnconcentratorChassisRingTopologyCardType | read-only | mandatory | This variable represents the type of the I/O card. |
| 1.3.6.1.4.1.33.25.9.1.11 | ColumnconcentratorChassisRingTopologyAutoUpChanges | read-only | mandatory | This variable reflects the number of times the topology has changed for this ring due to a dynamic wrap up. This variable is set to zero when concentratorSlotR… |
| 1.3.6.1.4.1.33.25.9.1.12 | ColumnconcentratorChassisRingTopologyAutoDownChanges | read-only | mandatory | This variable reflects the number of times the topology has changed for this ring due to a dynamic wrap down. This variable is set to zero when concentratorSlo… |
| 1.3.6.1.4.1.33.25.10 | TableconcentratorPortTable | not-accessible | mandatory | Table of information and status concerning the ports of a concentrator. |
| 1.3.6.1.4.1.33.25.10.1 | RowconcentratorPortEntry | not-accessible | mandatory | An entry in the table containing control and status information for a port. |
| 1.3.6.1.4.1.33.25.10.1.1 | ColumnconcentratorPortSlotIndex | read-only | mandatory | This variable identifies the slot of the chassis. |
| 1.3.6.1.4.1.33.25.10.1.2 | ColumnconcentratorPortIndex | read-only | mandatory | This variable identifies target port. |
| 1.3.6.1.4.1.33.25.10.1.3 | ColumnconcentratorPortName | read-write | mandatory | This variable represents the user defined name of the port. |
| 1.3.6.1.4.1.33.25.10.1.4 | ColumnconcentratorPortType | read-only | mandatory | This variable represents the type of connector provided for the port. |
| 1.3.6.1.4.1.33.25.10.1.5 | ColumnconcentratorPortZero | read-write | mandatory | This variable is used to control the ports counters. The agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. |
| 1.3.6.1.4.1.33.25.10.1.6 | ColumnconcentratorPortSinceZero | read-only | mandatory | This variable reflects the number of time ticks since the counters were las zeroed. This variable is set to zero when concentratorPortZero is written with the … |
| 1.3.6.1.4.1.33.25.10.1.7 | ColumnconcentratorPortAdminState | read-write | mandatory | This variable reflects the enable/disable state of the port. |
| 1.3.6.1.4.1.33.25.10.1.8 | ColumnconcentratorPortOperState | read-only | mandatory | This variable reflects the enable/disable state of the port. |
| 1.3.6.1.4.1.33.25.10.1.9 | ColumnconcentratorPortInsertions | read-only | mandatory | This variable reflects the number of times the port was inserted into the ring. |
| 1.3.6.1.4.1.33.25.10.1.10 | ColumnconcentratorPortInsertFailures | read-only | mandatory | This variable reflects the number of times the port was not inserted due to a data rate mismatch. |
| 1.3.6.1.4.1.33.25.10.1.11 | ColumnconcentratorPortAdminInsert | read-write | mandatory | This variable reflects the desired insertion of the port. Auto indicates to insert the port into the first slot ring with a matching data rate beginning with 1. |
| 1.3.6.1.4.1.33.25.10.1.12 | ColumnconcentratorPortOperInsert | read-only | mandatory | This variable reflects the slot ring to which the port is attached. |
| 1.3.6.1.4.1.33.25.10.1.13 | ColumnconcentratorPortSpeed | read-only | mandatory | This variable reflects the measured speed of the port. |
| 1.3.6.1.4.1.33.25.10.1.14 | ColumnconcentratorPortAdminLoopback | read-write | mandatory | This variable reflects the whether this port will be inserted into a ring or the data loop backed. |
| 1.3.6.1.4.1.33.25.10.1.15 | ColumnconcentratorPortStationType | read-write | mandatory | This variable reflects the concentrator port type. |
| 1.3.6.1.4.1.33.25.10.1.16 | ColumnconcentratorPortAdminTrunkInsert | read-write | mandatory | This variable is used to control the insertion of trunk ports. When set to 'execute' the trunk port will be inserted into the ring immediately and not wait for… |
| 1.3.6.1.4.1.33.25.10.1.17 | ColumnconcentratorPortSlotRingsAllowed | read-only | mandatory | The list of slot rings into which this port may be inserted. The OCTET STRING contains a bit map, with a bit for 'none' (indicating it may be isolated) and one… |
| 1.3.6.1.4.1.33.26 | NodexIsis | |||
| 1.3.6.1.4.1.33.26.1 | NodexIsisSystem | |||
| 1.3.6.1.4.1.33.26.1.1 | TablexIsisSysTable | not-accessible | mandatory | The set of instances of the Integrated IS-IS protocol existing on the system. |
| 1.3.6.1.4.1.33.26.1.1.1 | RowxIsisSysEntry | not-accessible | mandatory | Each row defines information specific to a single instance of the protocol existing on the system. |
| 1.3.6.1.4.1.33.26.1.1.1.1 | ColumnxIsisSysInstance | read-only | mandatory | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.33.26.1.1.1.2 | ColumnxIsisSysExistState | read-only | mandatory | The validity of this instance of the Integrated IS-IS protocol. This object follows the existenceState behaviour. |
| 1.3.6.1.4.1.33.26.1.1.1.3 | ColumnxIsisSysVersion | read-only | mandatory | The version number of the IS-IS protocol to which this instance conforms. This value must be set by the implementation when the row is valid. |
| 1.3.6.1.4.1.33.26.1.1.1.4 | ColumnxIsisSysType | read-write | mandatory | The type of this instance of the Integrated IS-IS protocol. This object follows the replaceOnlyWhileDisabled behaviour. |
| 1.3.6.1.4.1.33.26.1.1.1.5 | ColumnxIsisSysNET | read-only | mandatory | The ID for this instance of the Integrated IS-IS protocol. This value is appended to each of the instance's area addresses to form the Network Entity Titles va… |
| 1.3.6.1.4.1.33.26.1.1.1.6 | ColumnxIsisSysMaxPathSplits | read-write | mandatory | Maximum number of paths with equal routing metric value which it is permitted to split between. This object follows the replaceOnlyWhileDisabled behaviour. |
| 1.3.6.1.4.1.33.26.1.1.1.7 | ColumnxIsisSysMinLSPTransInt | read-write | mandatory | Minimum interval, in seconds, between re-transmission of an LSP. This object follows the resettingTimer behaviour. |
| 1.3.6.1.4.1.33.26.1.1.1.8 | ColumnxIsisSysMaxLSPGenInt | read-write | mandatory | Maximum interval, in seconds, between generated LSPs by this instance. This object follows the resettingTimer behaviour. |
| 1.3.6.1.4.1.33.26.1.1.1.9 | ColumnxIsisSysMinBroadLSPTransInt | read-write | mandatory | Minimum interval, in milliseconds, between transmission of LSPs on a broadcast circuit. This object follows the resettingTimer behaviour. This timer shall be c… |
| 1.3.6.1.4.1.33.26.1.1.1.10 | ColumnxIsisSysCompSNPInt | read-write | mandatory | Interval, in seconds, between generation of Complete Sequence Numbers PDUs by a designated Intermediate System on a broadcast circuit. This object follows the … |
| 1.3.6.1.4.1.33.26.1.1.1.11 | ColumnxIsisSysOrigL1LSPBuffSize | read-write | mandatory | The maximum size of Level 1 LSPs and SNPs originated by this instance. This object follows the replaceOnlyWhileDisabled behaviour. |
| 1.3.6.1.4.1.33.26.1.1.1.12 | ColumnxIsisSysMaxAreaAddr | read-write | mandatory | The maximum number of area addresses to be permitted for the area in which this instance exists. Note that all Intermediate Systems in the same area must have … |
| 1.3.6.1.4.1.33.26.1.1.1.13 | ColumnxIsisSysMinLSPGenInt | read-write | mandatory | Minimum interval, in seconds, between successive generation of LSPs with the same LSPID by this instance. This object follows the resettingTimer behaviour. |
| 1.3.6.1.4.1.33.26.1.1.1.14 | ColumnxIsisSysPollESHelloRate | read-write | mandatory | The value, in seconds, to be used for the suggested ES configuration timer in ISH PDUs when soliciting the ES configuration. |
| 1.3.6.1.4.1.33.26.1.1.1.15 | ColumnxIsisSysPartSNPInt | read-write | mandatory | Minimum interval between sending Partial Sequence Number PDUs. This object follows the resettingTimer behaviour. |
| 1.3.6.1.4.1.33.26.1.1.1.16 | ColumnxIsisSysWaitTime | read-write | mandatory | Number of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behaviour. |
| 1.3.6.1.4.1.33.26.1.1.1.17 | ColumnxIsisSysDRISISHelloTimer | read-write | mandatory | The interval, in seconds, between the generation of IIH PDUs by the designated IS on a LAN. This object follows the resettingTimer behaviour. |
| 1.3.6.1.4.1.33.26.1.1.1.18 | ColumnxIsisSysOperState | read-write | mandatory | The operational state of this instance of the Integrated IS-IS protocol. Setting this object to the value on when its current value is off enables operation of… |
| 1.3.6.1.4.1.33.26.1.1.1.19 | ColumnxIsisSysL1State | read-only | mandatory | The state of the Level 1 database. |
| 1.3.6.1.4.1.33.26.1.1.1.20 | ColumnxIsisSysCorrLSPs | read-only | mandatory | Number of corrupted LSPs detected. |
| 1.3.6.1.4.1.33.26.1.1.1.21 | ColumnxIsisSysL1LSPDbaseOloads | read-only | mandatory | Number of times the LSP L1 database has become overloaded. |
| 1.3.6.1.4.1.33.26.1.1.1.22 | ColumnxIsisSysManAddrsDropFromArea | read-only | mandatory | Number of times a manual address has been dropped from the area. |
| 1.3.6.1.4.1.33.26.1.1.1.23 | ColumnxIsisSysAttmptsToExMaxSeqNum | read-only | mandatory | Number of times the IS has attempted to exceed the maximum sequence number. |
| 1.3.6.1.4.1.33.26.1.1.1.24 | ColumnxIsisSysSeqNumSkips | read-only | mandatory | Number of times a sequence number skip has occurred. |
| 1.3.6.1.4.1.33.26.1.1.1.25 | ColumnxIsisSysOwnLSPPurges | read-only | mandatory | Number of times a zero-aged copy of the system's own LSP is received from some other node. |
| 1.3.6.1.4.1.33.26.1.1.1.26 | ColumnxIsisSysIDFieldLenMismatches | read-only | mandatory | Number of times a PDU is received with a different value for ID field length to that of the receiving system. |
| 1.3.6.1.4.1.33.26.1.1.1.27 | ColumnxIsisSysMaxAreaMis | read-only | mandatory | Number of times a PDU is received with a different value for MaximumAreaAddresses from that of the receiving system. |
| 1.3.6.1.4.1.33.26.1.1.1.28 | ColumnxIsisSysOrigL2LSPBuffSize | read-write | mandatory | The maximum size of Level 2 LSPs and SNPs originated by this system. This object follows the replaceOnlyWhileDisabled behaviour. |
| 1.3.6.1.4.1.33.26.1.1.1.29 | ColumnxIsisSysL2State | read-only | mandatory | The state of the Level 2 database. |
| 1.3.6.1.4.1.33.26.1.1.1.30 | ColumnxIsisSysL2LSPDbaseOloads | read-only | mandatory | Number of times the Level 2 LSP database has become overloaded. |
| 1.3.6.1.4.1.33.26.1.1.1.31 | ColumnxIsisSysMaxAreaCheck | read-write | mandatory | When on, enables checking of maximum area addresses per IS version of ISO10589. |
| 1.3.6.1.4.1.33.26.1.2 | TablexIsisManAreaAddrTable | not-accessible | mandatory | The set of manual area addresses configured on this Intermediate System. |
| 1.3.6.1.4.1.33.26.1.2.1 | RowxIsisManAreaAddrEntry | not-accessible | mandatory | Each entry contains one area address manually configured on this system |
| 1.3.6.1.4.1.33.26.1.2.1.1 | ColumnxIsisManAreaAddrSysInstance | read-only | mandatory | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.33.26.1.2.1.2 | ColumnxIsisManAreaAddr | read-only | mandatory | A manually configured area address for this system. This object follows the index behaviour. |
| 1.3.6.1.4.1.33.26.1.2.1.3 | ColumnxIsisManAreaAddrExistState | read-write | mandatory | The state of the xIsisManAreaAddrEntry. This object follows the ExistenceState behaviour. If an attempt is made to set this object to the value off when the co… |
| 1.3.6.1.4.1.33.26.1.3 | TablexIsisAreaAddrTable | not-accessible | mandatory | The union of the sets of area addresses reported in all Level 1 LSPs received by this instance of the protocol. |
| 1.3.6.1.4.1.33.26.1.3.1 | RowxIsisAreaAddrEntry | not-accessible | mandatory | Each entry contains one area address reported in a Level 1 LSP received by this instance of the protocol. |
| 1.3.6.1.4.1.33.26.1.3.1.1 | ColumnxIsisAreaAddrSysInstance | read-only | mandatory | The unique identifier of the Integrated IS-IS instance to which this row corresponds. |
| 1.3.6.1.4.1.33.26.1.3.1.2 | ColumnxIsisAreaAddr | read-only | mandatory | An area address reported in a Level 1 LSP received by this instance of the protocol. |
| 1.3.6.1.4.1.33.26.1.4 | TablexIsisSysProtSuppTable | not-accessible | mandatory | This table contains the manually configured set of protocols supported by each instance of the Integrated ISIS protocol. |
| 1.3.6.1.4.1.33.26.1.4.1 | RowxIsisSysProtSuppEntry | not-accessible | mandatory | Each entry contains one protocol supported by an instance of the Integrated ISIS protocol. |
| 1.3.6.1.4.1.33.26.1.4.1.1 | ColumnxIsisSysProtSuppSysInstance | read-only | mandatory | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.33.26.1.4.1.2 | ColumnxIsisSysProtSuppProtocol | read-only | mandatory | One supported protocol. This object follows the index behaviour. |
| 1.3.6.1.4.1.33.26.1.4.1.3 | ColumnxIsisSysProtSuppExistState | read-write | mandatory | The state of the xIsisSysProtSuppEntry. This object follows the ExistenceState and ReplaceOnlyWhileInstanceDisabled behaviours. |
| 1.3.6.1.4.1.33.26.2 | NodexIsisCirc | |||
| 1.3.6.1.4.1.33.26.2.1 | TablexIsisCircTable | not-accessible | mandatory | The table of circuits used by each instance of Integrated IS-IS on this system. |
| 1.3.6.1.4.1.33.26.2.1.1 | RowxIsisCircEntry | not-accessible | mandatory | An xIsisCircEntry exists for each circuit used by Integrated IS-IS on this system. |
| 1.3.6.1.4.1.33.26.2.1.1.1 | ColumnxIsisCircSysInstance | read-only | mandatory | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.33.26.2.1.1.2 | ColumnxIsisCircIndex | read-only | mandatory | The identifier of this circuit, unique within the instance of the protocol. This object follows the index behaviour. |
| 1.3.6.1.4.1.33.26.2.1.1.3 | ColumnxIsisCircIfIndex | read-only | mandatory | The value of ifIndex for the interface to which this circuit corresponds. This object follows the replaceOnlyWhileDisabled behaviour. |
| 1.3.6.1.4.1.33.26.2.1.1.4 | ColumnxIsisCircOperState | read-write | mandatory | The operational state of the circuit. This object follows the operationalState behaviour. |
| 1.3.6.1.4.1.33.26.2.1.1.5 | ColumnxIsisCircExistState | read-only | mandatory | The existence state of this circuit. This object follows the ExistenceState behaviour. |
| 1.3.6.1.4.1.33.26.2.1.1.6 | ColumnxIsisCircType | read-write | mandatory | The type of the circuit. This object follows the replaceOnlyWhileDisabled behaviour. The type specified must be compatible with the type of the interface defin… |
| 1.3.6.1.4.1.33.26.2.1.1.7 | ColumnxIsisCircHelloTimer | read-write | mandatory | The period, in seconds, between IIH PDUs. It is also used as the period between ISH PDUs when polling the ES configuration. This object follows the resettingTi… |
| 1.3.6.1.4.1.33.26.2.1.1.8 | ColumnxIsisCircL1DefaultMetric | read-write | mandatory | The default metric value of this circuit for Level 1 traffic. 0 means the IS will automatically generate Level 1 default metric for the circuit. |
| 1.3.6.1.4.1.33.26.2.1.1.9 | ColumnxIsisCircL1DelayMetric | read-write | mandatory | The delay metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported. |
| 1.3.6.1.4.1.33.26.2.1.1.10 | ColumnxIsisCircL1ExpenseMetric | read-write | mandatory | The expense metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported. |
| 1.3.6.1.4.1.33.26.2.1.1.11 | ColumnxIsisCircL1ErrorMetric | read-write | mandatory | The error metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported. |
| 1.3.6.1.4.1.33.26.2.1.1.12 | ColumnxIsisCircExtDomain | read-write | mandatory | If true, suppress normal transmission of and interpretation of Intra-domain ISIS PDUs on this circuit. |
| 1.3.6.1.4.1.33.26.2.1.1.13 | ColumnxIsisCircAdjChanges | read-only | mandatory | The number of times an adjacency state change has occurred on this circuit. |
| 1.3.6.1.4.1.33.26.2.1.1.14 | ColumnxIsisCircInitFails | read-only | mandatory | The number of times initialization of this circuit has failed. |
| 1.3.6.1.4.1.33.26.2.1.1.15 | ColumnxIsisCircRejAdjs | read-only | mandatory | The number of times an adjacency has been rejected on this circuit. |
| 1.3.6.1.4.1.33.26.2.1.1.16 | ColumnxIsisCircOutCtrlPDUs | read-only | mandatory | The number of IS-IS control PDUs sent on this circuit. |
| 1.3.6.1.4.1.33.26.2.1.1.17 | ColumnxIsisCircInCtrlPDUs | read-only | mandatory | The number of IS-IS control PDUs received on this circuit. |
| 1.3.6.1.4.1.33.26.2.1.1.18 | ColumnxIsisCircIDFieldLenMismatches | read-only | mandatory | The number of times an IS-IS control PDU with an ID field length different to that for this system has been received. |
| 1.3.6.1.4.1.33.26.2.1.1.20 | ColumnxIsisCircL2DefaultMetric | read-write | mandatory | The default metric value of this circuit for level 2 traffic. 0 means the IS will automatically generate the Level 2 default metric for this circuit. |
| 1.3.6.1.4.1.33.26.2.1.1.21 | ColumnxIsisCircL2DelayMetric | read-write | mandatory | The delay metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported. |
| 1.3.6.1.4.1.33.26.2.1.1.22 | ColumnxIsisCircL2ExpenseMetric | read-write | mandatory | The expense metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported. |
| 1.3.6.1.4.1.33.26.2.1.1.23 | ColumnxIsisCircL2ErrorMetric | read-write | mandatory | The error metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported. |
| 1.3.6.1.4.1.33.26.2.1.1.24 | ColumnxIsisCircManL2Only | read-write | mandatory | When true, indicates that this circuit is to be used only for level 2. This object follows the replaceOnlyWhileDisabled behaviour. |
| 1.3.6.1.4.1.33.26.2.1.1.25 | ColumnxIsisCircL1ISPriority | read-write | mandatory | The priority for becoming LAN Level 1 Deignated Intermediate System on a broadcast circuit. |
| 1.3.6.1.4.1.33.26.2.1.1.26 | ColumnxIsisCircL1CircID | read-only | mandatory | The LAN ID allocated by the LAN Level 1 Designated Intermediate System. Where this system is not aware of the value (because it is not participating in the Lev… |
| 1.3.6.1.4.1.33.26.2.1.1.27 | ColumnxIsisCircL1DesIS | read-only | mandatory | The ID of the LAN Level 1 Designated Intermediate System on this circuit. If, for any reason this system is not partaking in the relevant Designated Intermedia… |
| 1.3.6.1.4.1.33.26.2.1.1.28 | ColumnxIsisCircLANL1DesISChanges | read-only | mandatory | The number of times the LAN Level 1 Designated Intermediate System has changed. |
| 1.3.6.1.4.1.33.26.2.1.1.29 | ColumnxIsisCircL2ISPriority | read-write | mandatory | The priority for becoming LAN level 2 Designated Intermediate System. |
| 1.3.6.1.4.1.33.26.2.1.1.30 | ColumnxIsisCircL2CircID | read-only | mandatory | The LAN ID allocated by the LAN Level 2 Designated Intermediate System. Where this system is not aware of this value (because it is not participating in the Le… |
| 1.3.6.1.4.1.33.26.2.1.1.31 | ColumnxIsisCircL2DesIS | read-only | mandatory | The ID of the LAN Level 2 Designated Intermediate System on this circuit. If, for any reason, this system is not partaking in the relevant Designated Intermedi… |
| 1.3.6.1.4.1.33.26.2.1.1.32 | ColumnxIsisCircLANL2DesISChanges | read-only | mandatory | The number of times the LAN Level 2 Designated Intermediate System has changed. |
| 1.3.6.1.4.1.33.26.2.2 | TablexIsisCircISTable | not-accessible | mandatory | The set of objects controlling the operation of the IS functions of the ES-IS protocol (ISO 9542) on each circuit over which ISIS is run. |
| 1.3.6.1.4.1.33.26.2.2.1 | RowxIsisCircISEntry | not-accessible | mandatory | Each entry contains objects controlling the operation of the IS functions of the ES-IS protocol (ISO 9542) on one circuit. |
| 1.3.6.1.4.1.33.26.2.2.1.1 | ColumnxIsisCircISSysInstance | read-only | mandatory | The identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index and manualOrAutomatic behaviours. |
| 1.3.6.1.4.1.33.26.2.2.1.2 | ColumnxIsisCircISIndex | read-only | mandatory | The unique identifier of this row. This value is the same as the value of the ifIndex object which identifies the interface which corresponds to this circuit. … |
| 1.3.6.1.4.1.33.26.2.2.1.3 | ColumnxIsisCircISExistState | read-only | mandatory | The existence state of this row. This object follows the ExistenceState behaviour. |
| 1.3.6.1.4.1.33.26.2.2.1.4 | ColumnxIsisCircISOperState | read-write | mandatory | The operational state of the row. This object follows the operationalState behaviour. |
| 1.3.6.1.4.1.33.26.2.2.1.5 | ColumnxIsisCircISHoldTimerMult | read-only | mandatory | The factor to derive holding timer from configuration timer. This value when multipled by a configuration timer yields the value of the holding timer parameter… |
| 1.3.6.1.4.1.33.26.2.2.1.6 | ColumnxIsisCircISConfTimer | read-write | mandatory | Value in seconds for the ISO 9542 IS configuration timer. It is used to determine how often an IS reports configuration information to ESs. This object follows… |
| 1.3.6.1.4.1.33.26.2.2.1.7 | ColumnxIsisCircISSuggESConfTimer | read-write | mandatory | Value to be used for the ISO 9542 suggested ES configuration timer value (in seconds), advertised in IS Hellos generated by the system on this circuit. This ob… |
| 1.3.6.1.4.1.33.26.2.2.1.8 | ColumnxIsisCircISRedHoldTime | read-write | mandatory | The holding time (in seconds) to be specified in Redirect PDUs generated by the system on this circuit. |
| 1.3.6.1.4.1.33.26.2.2.1.9 | ColumnxIsisCircISESReachChgs | read-only | mandatory | Count of the number of changes in reachability of End Systems from this circuit. |
| 1.3.6.1.4.1.33.26.2.2.1.10 | ColumnxIsisCircISInv9542PDUs | read-only | mandatory | Counter of invalid 9542 PDUs received. This is the number of ISO 9452 PDUs received which are discarded as a result of the PDU Header Error Detection or Protoc… |
| 1.3.6.1.4.1.33.26.2.3 | TablexIsisCircClnsTable | not-accessible | mandatory | The set of objects controlling the operation of the CLNS protocol (ISO 8473) on each circuit over which ISIS is run. |
| 1.3.6.1.4.1.33.26.2.3.1 | RowxIsisCircClnsEntry | not-accessible | mandatory | Each entry contains objects controlling the operation of the CLNS protocol (ISO 8473) on one circuit. |
| 1.3.6.1.4.1.33.26.2.3.1.1 | ColumnxIsisCircClnsSysInstance | read-only | mandatory | The identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index and manualOrAutomatic behaviours. |
| 1.3.6.1.4.1.33.26.2.3.1.2 | ColumnxIsisCircClnsIndex | read-only | mandatory | The unique identifier of this row. This value is the same as the value of the ifIndex object which identifies the interface which corresponds to this circuit. … |
| 1.3.6.1.4.1.33.26.2.3.1.3 | ColumnxIsisCircClnsExistState | read-only | mandatory | The existence state of this row. This object follows the ExistenceState behaviour. |
| 1.3.6.1.4.1.33.26.2.3.1.4 | ColumnxIsisCircClnsOperState | read-write | mandatory | The operational state of the row. This object follows the operationalState behaviour. |
| 1.3.6.1.4.1.33.26.2.3.1.5 | ColumnxIsisCircClnsRxPDUs | read-only | mandatory | Counter of number of CLNS PDUs received on this circuit. |
| 1.3.6.1.4.1.33.26.2.3.1.6 | ColumnxIsisCircClnsTxPDUs | read-only | mandatory | Counter of number of CLNS PDUs transmitted on this circuit. |
| 1.3.6.1.4.1.33.26.3 | NodexIsisISAdj | |||
| 1.3.6.1.4.1.33.26.3.1 | TablexIsisISAdjTable | not-accessible | mandatory | The table of adjacencies to Intermediate Systems. |
| 1.3.6.1.4.1.33.26.3.1.1 | RowxIsisISAdjEntry | not-accessible | mandatory | Each entry corresponds to one adjacency to an Intermediate System on this system. |
| 1.3.6.1.4.1.33.26.3.1.1.1 | ColumnxIsisISAdjSysInstance | read-only | mandatory | The unique identifier of the Integrated IS-IS instance to which this row corresponds. |
| 1.3.6.1.4.1.33.26.3.1.1.2 | ColumnxIsisISAdjCircIndex | read-only | mandatory | The identifier of the Circuit which is the parent of the IS adjacency. |
| 1.3.6.1.4.1.33.26.3.1.1.3 | ColumnxIsisISAdjIndex | read-only | mandatory | A unique value identifying the IS adjacency from all other such adjacencies on this circuit. This value is assigned by the system when the adjacency is created… |
| 1.3.6.1.4.1.33.26.3.1.1.4 | ColumnxIsisISAdjState | read-only | mandatory | The state of the adjacency |
| 1.3.6.1.4.1.33.26.3.1.1.5 | ColumnxIsisISAdjNeighSNPAAddress | read-only | mandatory | The SNPA address of the neighboring system. |
| 1.3.6.1.4.1.33.26.3.1.1.6 | ColumnxIsisISAdjNeighSysType | read-only | mandatory | The type of the neighboring system. |
| 1.3.6.1.4.1.33.26.3.1.1.7 | ColumnxIsisISAdjNeighSysID | read-only | mandatory | The system ID of the neighboring Intermediate System set from the source ID field of the neighbor's IIH PDUs. |
| 1.3.6.1.4.1.33.26.3.1.1.8 | ColumnxIsisISAdjUsage | read-only | mandatory | The usage of the adjacency. An adjacency of type level1 will be used for level 1 traffic only. An adjacency of type level2 will be used for level 2 traffic onl… |
| 1.3.6.1.4.1.33.26.3.1.1.9 | ColumnxIsisISAdjHoldTimer | read-only | mandatory | The holding time for this adjacency updated from received IIH PDUs. |
| 1.3.6.1.4.1.33.26.3.1.1.10 | ColumnxIsisISAdjNeighPriority | read-only | mandatory | Priority of the neighboring Intermediate System for becoming the LAN Level 1 Designated Intermediate System if the value of xIsisISAdjNeighSysType is L1Interme… |
| 1.3.6.1.4.1.33.26.3.2 | TablexIsisISAdjAreaAddrTable | not-accessible | mandatory | This table contains the set of Area Addresses of neighboring Intermediate Systems as reported in received IIH PDUs. |
| 1.3.6.1.4.1.33.26.3.2.1 | RowxIsisISAdjAreaAddrEntry | not-accessible | mandatory | Each entry contains one Area Address reported by a neighboring Intermediate System in its IIH PDUs. |
| 1.3.6.1.4.1.33.26.3.2.1.1 | ColumnxIsisISAdjAreaAddrSysInstance | read-only | mandatory | The unique identifier of the Integrated IS-IS instance to which this row corresponds. |
| 1.3.6.1.4.1.33.26.3.2.1.2 | ColumnxIsisISAdjAreaAddrCircIndex | read-only | mandatory | The identifier of the Circuit which is the parent of the IS adjacency to which this Area Address entry corresponds. |
| 1.3.6.1.4.1.33.26.3.2.1.3 | ColumnxIsisISAdjAreaAddrAdjIndex | read-only | mandatory | The identifier of the IS adjacency to which this entry belongs. |
| 1.3.6.1.4.1.33.26.3.2.1.4 | ColumnxIsisISAdjAreaAddress | read-only | mandatory | One Area Address as reported in IIH PDUs received from the neighbor. |
| 1.3.6.1.4.1.33.26.3.3 | TablexIsisISAdjIPAddrTable | not-accessible | mandatory | This table contains the set of IP Addresses of neighboring Intermediate Systems as reported in received IIH PDUs. |
| 1.3.6.1.4.1.33.26.3.3.1 | RowxIsisISAdjIPAddrEntry | not-accessible | mandatory | Each entry contains one IP Address reported by a neighboring Intermediate System in its IIH PDUs. |
| 1.3.6.1.4.1.33.26.3.3.1.1 | ColumnxIsisISAdjIPAddrSysInstance | read-only | mandatory | The unique identifier of the Integrated IS-IS instance to which this row corresponds. |
| 1.3.6.1.4.1.33.26.3.3.1.2 | ColumnxIsisISAdjIPAddrCircIndex | read-only | mandatory | The identifier of the Circuit which is the parent of the IS adjacency to which this IP Address entry corresponds. |
| 1.3.6.1.4.1.33.26.3.3.1.3 | ColumnxIsisISAdjIPAddrAdjIndex | read-only | mandatory | The identifier of the IS adjacency to which this entry belongs. |
| 1.3.6.1.4.1.33.26.3.3.1.4 | ColumnxIsisISAdjIPAddress | read-only | mandatory | One IP Address as reported in IIH PDUs received from the neighbor. |
| 1.3.6.1.4.1.33.26.3.4 | TablexIsisISAdjProtSuppTable | not-accessible | mandatory | This table contains the set of protocols supported by neighboring Intermediate Systems as reported in received IIH PDUs. |
| 1.3.6.1.4.1.33.26.3.4.1 | RowxIsisISAdjProtSuppEntry | not-accessible | mandatory | Each entry contains one protocol supported by a neighboring Intermediate System as reported in its IIH PDUs. |
| 1.3.6.1.4.1.33.26.3.4.1.1 | ColumnxIsisISAdjProtSuppSysInstance | read-only | mandatory | The unique identifier of the Integrated IS-IS instance to which this row corresponds. |
| 1.3.6.1.4.1.33.26.3.4.1.2 | ColumnxIsisISAdjProtSuppCircIndex | read-only | mandatory | The identifier of the Circuit which is the parent of the IS adjacency to which this supported protocol entry corresponds. |
| 1.3.6.1.4.1.33.26.3.4.1.3 | ColumnxIsisISAdjProtSuppAdjIndex | read-only | mandatory | The identifier the IS adjacency to which this entry corresponds. |
| 1.3.6.1.4.1.33.26.3.4.1.4 | ColumnxIsisISAdjProtSuppProtocol | read-only | mandatory | One supported protocol as reported in IIH PDUs received from the neighbor. |
| 1.3.6.1.4.1.33.26.4 | NodexIsisESAdj | |||
| 1.3.6.1.4.1.33.26.4.1 | TablexIsisESAdjTable | not-accessible | mandatory | The table of End System IDs of neighboring End Systems as reported in their ESH PDUs or as configured manually |
| 1.3.6.1.4.1.33.26.4.1.1 | RowxIsisESAdjEntry | not-accessible | mandatory | Each entry contains one End System ID of a neighboring End System as reported in an ESH PDU or as configured manually. |
| 1.3.6.1.4.1.33.26.4.1.1.1 | ColumnxIsisESAdjSysInstance | read-only | mandatory | The identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index and manualOrAutomatic behaviours. |
| 1.3.6.1.4.1.33.26.4.1.1.2 | ColumnxIsisESAdjCircIndex | read-only | mandatory | The identifier of the Circuit which is the parent of the ES adjacency to which this End System ID entry corresponds. This object follows the index and manualOr… |
| 1.3.6.1.4.1.33.26.4.1.1.3 | ColumnxIsisESAdjIndex | read-only | mandatory | The identifier of the ES adjacency to which this entry belongs. This object follows the index and manualOrAutomatic behaviours. |
| 1.3.6.1.4.1.33.26.4.1.1.4 | ColumnxIsisESAdjType | read-only | mandatory | The indication of whether this adjacency was created manually by management action or automatically by the implementation. |
| 1.3.6.1.4.1.33.26.4.1.1.5 | ColumnxIsisESAdjState | read-write | mandatory | The state of the adjacency. Adjacencies created manually always have this value set to up. |
| 1.3.6.1.4.1.33.26.4.1.1.6 | ColumnxIsisESAdjNeighSNPAAddress | read-write | mandatory | The SNPA address of the neighboring system. This object follows the manualOrAutomatic behaviour. |
| 1.3.6.1.4.1.33.26.4.1.1.7 | ColumnxIsisESAdjExistState | read-write | mandatory | The existence state of this ES Adjacency. This object follows the ExistenceState behaviour. This object follows the manualOrAutomatic behaviour. |
| 1.3.6.1.4.1.33.26.4.1.1.8 | ColumnxIsisESAdjESID | read-only | mandatory | An End System ID of a neighboring End System. This object follows the index and manualOrAutomatic behaviour. |
| 1.3.6.1.4.1.33.26.5 | NodexIsisReachAddr | |||
| 1.3.6.1.4.1.33.26.5.1 | TablexIsisRATable | not-accessible | mandatory | The table of Reachable Addresses to NSAPs or Address Prefixes. |
| 1.3.6.1.4.1.33.26.5.1.1 | RowxIsisRAEntry | not-accessible | mandatory | Each entry defines a Reachable Address to a NSAP or Address Prefix. |
| 1.3.6.1.4.1.33.26.5.1.1.1 | ColumnxIsisRASysInstance | read-only | mandatory | The identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index and manualOrAutomatic behaviours. |
| 1.3.6.1.4.1.33.26.5.1.1.2 | ColumnxIsisRACircIndex | read-only | mandatory | The identifier of the Circuit over which this destination is reachable. This object follows the index and manualOrAutomatic behaviours. |
| 1.3.6.1.4.1.33.26.5.1.1.3 | ColumnxIsisRAIndex | read-only | mandatory | The identifier for this xIsisRAEntry. This value must be unique amongst all Reachable Addresses on the same parent Circuit. This object follows the index and m… |
| 1.3.6.1.4.1.33.26.5.1.1.4 | ColumnxIsisRAExistState | read-write | mandatory | The existence state of this Reachable Address. This object follows the ExistenceState and manualOrAutomatic behaviours. |
| 1.3.6.1.4.1.33.26.5.1.1.5 | ColumnxIsisRAOperState | read-write | mandatory | The operational state of the Reachable Address. This object follows the operationalState and manualOrAutomatic behaviours. |
| 1.3.6.1.4.1.33.26.5.1.1.6 | ColumnxIsisRAAddrPrefix | read-write | mandatory | The destination of this Reachable Address. This is an Address Prefix. This object follows the replaceOnlyWhileDisabled and manualOrAutomatic behaviours. |
| 1.3.6.1.4.1.33.26.5.1.1.7 | ColumnxIsisRAMapType | read-write | mandatory | The type of mapping to be employed to ascertain the SNPA Address which should be used in forwarding PDUs for this Reachable Address prefix. This object follows… |
| 1.3.6.1.4.1.33.26.5.1.1.8 | ColumnxIsisRADefMetric | read-write | mandatory | The default metric value for reaching the specified prefix over this circuit. This object follows the manualOrAutomatic behaviour. |
| 1.3.6.1.4.1.33.26.5.1.1.9 | ColumnxIsisRADelMetric | read-write | mandatory | The delay metric for reaching the specified prefix over this circuit. This object follows the manualOrAutomatic behaviour. The value zero is reserved to indica… |
| 1.3.6.1.4.1.33.26.5.1.1.10 | ColumnxIsisRAExpMetric | read-write | mandatory | The expense metric for reaching the specified prefix over this circuit. This object follows the manualOrAutomatic behaviour. The value zero is reserved to indi… |
| 1.3.6.1.4.1.33.26.5.1.1.11 | ColumnxIsisRAErrMetric | read-write | mandatory | The error metric for reaching the specified prefix over this circuit. This object follows the manualOrAutomatic behaviour. The value zero is reserved to indica… |
| 1.3.6.1.4.1.33.26.5.1.1.12 | ColumnxIsisRADefMetricType | read-write | mandatory | Indicates whether the default metric is internal or external. This object follows the manualOrAutomatic behaviour. |
| 1.3.6.1.4.1.33.26.5.1.1.13 | ColumnxIsisRADelMetricType | read-write | mandatory | Indicates whether the delay metric is internal or external. This object follows the manualOrAutomatic behaviour. |
| 1.3.6.1.4.1.33.26.5.1.1.14 | ColumnxIsisRAExpMetricType | read-write | mandatory | Indicates whether the expense metric is internal or external. This object follows the manualOrAutomatic behaviour. |
| 1.3.6.1.4.1.33.26.5.1.1.15 | ColumnxIsisRAErrMetricType | read-write | mandatory | Indicates whether the error metric is internal or external. This object follows the manualOrAutomatic behaviour. |
| 1.3.6.1.4.1.33.26.5.1.1.16 | ColumnxIsisRASNPAAddress | read-write | mandatory | The SNPA Address to which a PDU may be forwarded in order to reach a destination which matches the address prefix of the Reachable Address. This object follows… |
| 1.3.6.1.4.1.33.26.5.1.1.17 | ColumnxIsisRASNPAMask | read-write | mandatory | A bit mask with 1 bits indicating the positions in the effective destination address from which embedded SNPA information is to be extracted. For the extractio… |
| 1.3.6.1.4.1.33.26.5.1.1.18 | ColumnxIsisRASNPAPrefix | read-write | mandatory | A fixed SNPA prefix for use when the xIsisRAMapType is extractDSP. The SNPA Address to use is formed by concatenating the fixed SNPA prefix with a variable SNP… |
| 1.3.6.1.4.1.33.26.5.1.1.20 | ColumnxIsisRAType | read-only | mandatory | The type of Reachable address. Those of type manual are created by the network manager. Those of type automatic are created through propogation of routing info… |
| 1.3.6.1.4.1.33.26.7 | NodexIsisCLNPDest | |||
| 1.3.6.1.4.1.33.26.7.1 | TablexIsisL1CLNPDestTable | not-accessible | mandatory | The Level 1 CLNP Destination Table records information about each end system ID destination known to the Intermediate System. |
| 1.3.6.1.4.1.33.26.7.1.1 | RowxIsisL1CLNPDestEntry | not-accessible | mandatory | Each entry records information about one CLNP end system ID destination known to the Intermediate System. |
| 1.3.6.1.4.1.33.26.7.1.1.1 | ColumnxIsisL1CLNPSysInstance | read-only | mandatory | If the value of xIsisL1CLNPRouteSource is manual or level1 then this is the identifier of the Integrated IS-IS Level 1 instance from which this reachability in… |
| 1.3.6.1.4.1.33.26.7.1.1.2 | ColumnxIsisL1CLNPRouteDest | read-only | mandatory | The destination end system ID. |
| 1.3.6.1.4.1.33.26.7.1.1.3 | ColumnxIsisL1CLNPRouteMetricQOS | read-only | mandatory | The QOS metric for this destination. |
| 1.3.6.1.4.1.33.26.7.1.1.4 | ColumnxIsisL1CLNPRouteMetricType | read-only | mandatory | Indicates whether the metric has an external component or not |
| 1.3.6.1.4.1.33.26.7.1.1.5 | ColumnxIsisL1CLNPRouteMetricValue | read-only | mandatory | The path metric value for this destination. |
| 1.3.6.1.4.1.33.26.7.1.1.6 | ColumnxIsisL1CLNPRouteForw | read-only | mandatory | The OBJECT IDENTIFIER for the first object in the table entry which corresponds to the entry used for forwarding packets to this destination. This value is an … |
| 1.3.6.1.4.1.33.26.7.1.1.7 | ColumnxIsisL1CLNPRouteSource | read-only | mandatory | The source of the destination. Manual is used if the source is manually configured information on the system. Level1 is used if the source is Level 1 LSPs. Esi… |
| 1.3.6.1.4.1.33.26.7.2 | TablexIsisL2CLNPDestTable | not-accessible | mandatory | The Level 2 CLNP Destination Table records information about each NSAP Address Prefix known to the Intermediate System. |
| 1.3.6.1.4.1.33.26.7.2.1 | RowxIsisL2CLNPDestEntry | not-accessible | mandatory | Each entry records information about one NSAP Address Prefix known to the Intermediate System. |
| 1.3.6.1.4.1.33.26.7.2.1.1 | ColumnxIsisL2CLNPSysInstance | read-only | mandatory | The identifier of the Integrated IS-IS Level 2 instance from which this reachability information was learned. |
| 1.3.6.1.4.1.33.26.7.2.1.2 | ColumnxIsisL2CLNPRouteDest | read-only | mandatory | The destination address prefix. |
| 1.3.6.1.4.1.33.26.7.2.1.3 | ColumnxIsisL2CLNPRouteMetricQOS | read-only | mandatory | The QOS metric for this destination. |
| 1.3.6.1.4.1.33.26.7.2.1.4 | ColumnxIsisL2CLNPRouteMetricType | read-only | mandatory | Indicates whether the metric has an external component or not |
| 1.3.6.1.4.1.33.26.7.2.1.5 | ColumnxIsisL2CLNPRouteMetricValue | read-only | mandatory | The path metric value for this destination. |
| 1.3.6.1.4.1.33.26.7.2.1.6 | ColumnxIsisL2CLNPRouteForw | read-only | mandatory | The OBJECT IDENTIFIER for the first object in the table entry which corresponds to the entry used for forwarding packets to this destination. This value is an … |
| 1.3.6.1.4.1.33.26.7.2.1.7 | ColumnxIsisL2CLNPRouteSource | read-only | mandatory | The source of the destination. Manual is used if the source is manually configured information on the system. Level2 is used if the source is Level 2 LSPs. |
| 1.3.6.1.4.1.33.26.7.3 | TablexIsisL3CLNPDestTable | not-accessible | mandatory | The Level 3 CLNP Destination Table records information about each Reachable Address Prefix known to the Intermediate System. |
| 1.3.6.1.4.1.33.26.7.3.1 | RowxIsisL3CLNPDestEntry | not-accessible | mandatory | Each entry records information about one Address Prefix known to the Intermediate System. |
| 1.3.6.1.4.1.33.26.7.3.1.1 | ColumnxIsisL3CLNPSysInstance | read-only | mandatory | The identifier of the Integrated IS-IS Level 3 instance from which this reachability information was learned. |
| 1.3.6.1.4.1.33.26.7.3.1.2 | ColumnxIsisL3CLNPRouteDest | read-only | mandatory | The destination address prefix. |
| 1.3.6.1.4.1.33.26.7.3.1.3 | ColumnxIsisL3CLNPRouteMetricQOS | read-only | mandatory | The QOS metric for this destination. |
| 1.3.6.1.4.1.33.26.7.3.1.4 | ColumnxIsisL3CLNPRouteMetricType | read-only | mandatory | Indicates whether the metric has an external component or not |
| 1.3.6.1.4.1.33.26.7.3.1.5 | ColumnxIsisL3CLNPRouteMetricValue | read-only | mandatory | The path metric value for this destination. |
| 1.3.6.1.4.1.33.26.7.3.1.6 | ColumnxIsisL3CLNPRouteForw | read-only | mandatory | The OBJECT IDENTIFIER for the first object in the table entry which corresponds to the entry used for forwarding packets to this destination. This value is an … |
| 1.3.6.1.4.1.33.26.7.3.1.7 | ColumnxIsisL3CLNPRouteSource | read-only | mandatory | The source of the destination. Manual is used if the source is manually configured information on the system. Level3 is used if the source is Level 3 LSPs. |
| 1.3.6.1.4.1.33.31 | NodexRmon | |||
| 1.3.6.1.4.1.33.31.1 | NodeiTouchAlarm | The SNMP trap that is generated when xRmonTrapType is set to iTouchFormat(2). These traps, like the RMON standardFormat(1) traps, occur when an alarm variable … | ||
| 1.3.6.1.4.1.33.31.1 | NodexRmonMonitor | |||
| 1.3.6.1.4.1.33.31.1.1 | ScalarxRmonMonitorRemote | read-only | mandatory | Once an alarm is 'completed', monitoring for that variable may be distributed within an enclosure to another processor. Factors affecting this decision include… |
| 1.3.6.1.4.1.33.31.1.2 | ScalarxRmonMonitorLocal | read-only | mandatory | Once an alarm is 'completed', monitoring for that variable may be distributed within an enclosure to another processor. Factors affecting this decision include… |
| 1.3.6.1.4.1.33.31.1.3 | ScalarxRmonLogClear | read-write | mandatory | Set this field to 'execute' to delete all RMON log table entries. Setting to 'ready' has no effect. |
| 1.3.6.1.4.1.33.31.1.4 | ScalarxRmonLogTotal | read-only | mandatory | This field reports the total number of RMON log entries created since the system was initialized. Clearing the log table does not change this value. |
| 1.3.6.1.4.1.33.31.1.5 | ScalarxRmonLogLastDateTime | read-only | mandatory | The local date and time of the system at the time an RMON log entry was last created. |
| 1.3.6.1.4.1.33.31.1.6 | ScalarxRmonTrapType | read-write | mandatory | Use this field to specify the type of SNMP trap to generate when an alarm event occurs. The value 'standardFormat' formats the trap as a standard, RMON-complia… |
| 1.3.6.1.4.1.33.31.1.7 | ScalarxRmonRepeaterManagement | read-write | mandatory | This field enables and disables RMON monitoring of certain repeater related variables in the chassis. Set this field to 'enabled' to allow this slot to activat… |
| 1.3.6.1.4.1.33.31.1.8 | ScalarxRmonAlarmActivate | read-write | mandatory | Use this field to change the states of all completed alarms to 'active' or 'inactive'. Select 'activateAll' to make all completed alarms not in the 'active' st… |
| 1.3.6.1.4.1.33.31.1.9 | ScalarxRmonAlarmClear | read-write | mandatory | Set this field to 'deleteAll' to delete all alarm table entries and their associated event entries. Setting to 'noAction' has no effect. |
| 1.3.6.1.4.1.33.31.1.10 | NodexRmonAlarmCount | |||
| 1.3.6.1.4.1.33.31.1.10.1 | ScalarxRmonAlarmsIncomplete | read-only | mandatory | This value represents the number of alarms that are not completed. Completing these alarms will make them active. |
| 1.3.6.1.4.1.33.31.1.10.2 | ScalarxRmonAlarmsActive | read-only | mandatory | This value represents the number of alarms whose state is 'active'. These are completed alarms which are actively monitored. |
| 1.3.6.1.4.1.33.31.1.10.3 | ScalarxRmonAlarmsHeld | read-only | mandatory | This value represents the number of alarms whose state is 'held'. These are completed alarms which will not be actively monitored because the Repeater Manageme… |
| 1.3.6.1.4.1.33.31.1.10.4 | ScalarxRmonAlarmsOther | read-only | mandatory | This value represents the number of completed alarms that are not 'active' and not 'held'. Monitoring is not active for these alarms. |
| 1.3.6.1.4.1.33.31.1.11 | ScalarxRmonAlarmInitAction | read-write | mandatory | Use this field to specify whether all alarms read from the parameter file should be placed in the 'active' state or the 'inactive' state upon system initializa… |
| 1.3.6.1.4.1.33.31.2 | NodexRmonMB | |||
| 1.3.6.1.4.1.33.31.2.1 | NodexRmonMBConfig | |||
| 1.3.6.1.4.1.33.31.2.1.1 | ScalarmbAlarmIndex | read-write | mandatory | This field can be either the index of an existing alarm (as seen in the alarm summary view) or a new number to create a new alarm. Specify the index of an exis… |
| 1.3.6.1.4.1.33.31.2.1.2 | ScalarmbAlarmInterval | read-write | mandatory | The interval in seconds over which the variable is sampled and compared with the rising and falling thresholds. If the monitored variable exceeds the limit 2^3… |
| 1.3.6.1.4.1.33.31.2.1.3 | ScalarmbAlarmVariable | read-write | mandatory | This value shows the SNMP object identifier of the variable being sampled. Only variables that have an SNMP 'SYNTAX' of INTEGER, Counter, Gauge, or TimeTicks m… |
| 1.3.6.1.4.1.33.31.2.1.4 | ScalarmbAlarmInterpretation | read-write | mandatory | Use this field when you want to select an alarm variable without specifying its entire SNMP object identifier. First, modify this field by selecting a variable… |
| 1.3.6.1.4.1.33.31.2.1.5 | ScalarmbAlarmKey1Meaning | read-only | mandatory | This field describes how its adjacent key value field will be interpreted when building a complete SNMP object identifier for the alarm variable. The value of … |
| 1.3.6.1.4.1.33.31.2.1.6 | ScalarmbAlarmKey1 | read-write | mandatory | Specify a value here according the the instructions given in its adjacent prompt field. That prompt explains how this field will be used. You may still modify … |
| 1.3.6.1.4.1.33.31.2.1.7 | ScalarmbAlarmKey2Meaning | read-only | mandatory | This field describes how its adjacent key value field will be interpreted when building a complete SNMP object identifier for the alarm variable. The value of … |
| 1.3.6.1.4.1.33.31.2.1.8 | ScalarmbAlarmKey2 | read-write | mandatory | Specify a value here according the the instructions given in its adjacent prompt field. That prompt explains how this field will be used. In some cases, the va… |
| 1.3.6.1.4.1.33.31.2.1.9 | ScalarmbAlarmSampleType | read-write | mandatory | Use this field to select the method of calculating the value to be compared against the thresholds. When you set this to 'absoluteValue', the variable you spec… |
| 1.3.6.1.4.1.33.31.2.1.10 | ScalarmbAlarmValue | read-only | mandatory | This field shows the value of the alarm variable at the end of the most recent monitoring interval. If the alarm sample type is 'changeInValue', it instead sho… |
| 1.3.6.1.4.1.33.31.2.1.11 | ScalarmbAlarmRisingThreshold | read-write | mandatory | This is the rising threshold value for the alarm. When the current alarm value, specified by the alarm sample type, is greater than or equal to this threshold,… |
| 1.3.6.1.4.1.33.31.2.1.12 | ScalarmbAlarmFallingThreshold | read-write | mandatory | This is the falling threshold value for the alarm. When the current alarm value, specified by the alarm sample type, is less than or equal to this threshold, a… |
| 1.3.6.1.4.1.33.31.2.1.13 | ScalarmbAlarmRisingEventType | read-write | mandatory | Use this field to indicate the type of notification to make when the alarm variable exceeds its rising threshold. The default action is to generate both a log … |
| 1.3.6.1.4.1.33.31.2.1.14 | ScalarmbAlarmFallingEventType | read-write | mandatory | Use this field to indicate the type of notification to make when the alarm variable exceeds its falling threshold. The default action is to generate both a log… |
| 1.3.6.1.4.1.33.31.2.1.15 | ScalarmbAlarmSummary | read-only | mandatory | As you make changes to the to alarm settings, this field is filled with an easily readable summary of the alarm parameters. This is to make it easy for you to … |
| 1.3.6.1.4.1.33.31.2.1.16 | ScalarmbAlarmStatus | read-write | mandatory | Describes the current operational state of the alarm and allows you to make limited changes in the state of the alarm for purposes of managing its state. You m… |
| 1.3.6.1.4.1.33.31.2.2 | TablembAlarmTable | not-accessible | mandatory | A list of RMON alarms. This table is indexed by alarmIndex to provide an intuitive mapping between alarms and descriptions. |
| 1.3.6.1.4.1.33.31.2.2.1 | RowmbAlarmEntry | not-accessible | mandatory | A description of an RMON alarm which summarizes the actual RMON alarm and event parameters corresponding to this entry. |
| 1.3.6.1.4.1.33.31.2.2.1.1 | ColumnmbAlarmCondition | read-write | mandatory | Describes the current operational state of the alarm and allows you to make limited changes in the state of the alarm for purposes of managing its state. You m… |
| 1.3.6.1.4.1.33.31.2.2.1.2 | ColumnmbAlarmDescription | read-only | mandatory | An easily-readable summary of an RMON alarm. The general format is: ' when is >= or <= .' is from: 'Do nothing', 'Create log record', 'Generate trap', 'Create … |
| 1.3.6.1.4.1.33.31.2.3 | TablembLogTable | not-accessible | mandatory | A list of RMON logTable entries. |
| 1.3.6.1.4.1.33.31.2.3.1 | RowmbLogEntry | not-accessible | mandatory | A human-readable description of an RMON event. |
| 1.3.6.1.4.1.33.31.2.3.1.1 | ColumnmbLogIndex | read-only | mandatory | An index uniquely identifying an entry in this log table. Each such entry describes, in human-readable format, an RMON event occurring for an alarm. All RMON l… |
| 1.3.6.1.4.1.33.31.2.3.1.2 | ColumnmbLogDescription | read-only | mandatory | An easily-readable summary of an RMON log entry. The general format is: ': alarm is .' is the date and time the entry was created. is the alarm index causing t… |
| 1.3.6.1.4.1.33.31.2.4 | TablembResourceTable | not-accessible | mandatory | A list of RMON resource entries. |
| 1.3.6.1.4.1.33.31.2.4.1 | RowmbResourceEntry | not-accessible | mandatory | Values to control and monitor RMON resources. |
| 1.3.6.1.4.1.33.31.2.4.1.1 | ColumnmbResourceType | read-only | mandatory | Identification of an RMON resource type. Typically each type corresponds to an RMON table whose size is to be controlled and monitored. |
| 1.3.6.1.4.1.33.31.2.4.1.2 | ColumnmbResourceCurrent | read-only | mandatory | The number of entries currently allocated by RMON. |
| 1.3.6.1.4.1.33.31.2.4.1.3 | ColumnmbResourceWorst | read-only | mandatory | The highest number of entries ever allocated by RMON since system initialization. |
| 1.3.6.1.4.1.33.31.2.4.1.4 | ColumnmbResourceMaximum | read-write | mandatory | The desired maximum possible number of resources of this type RMON is permitted to use at any one time. Changes to alarm, event, and log entry resource setting… |
| 1.3.6.1.4.1.33.31.2.4.1.5 | ColumnmbResourceOperMaximum | read-only | mandatory | The actual maximum number of resources of this type RMON will attempt to use at any one time. This is the limit in effect for the current system. |
| 1.3.6.1.4.1.33.31.3 | TablexRmonMapTable | not-accessible | mandatory | A list of RMON map entries. |
| 1.3.6.1.4.1.33.31.3.1 | RowxRmonMapEntry | not-accessible | mandatory | Values to create RMON statistics tables for repeater ports. |
| 1.3.6.1.4.1.33.31.3.1.1 | ColumnxRmonMapSlot | read-write | mandatory | The slot the statistics will come from. |
| 1.3.6.1.4.1.33.31.3.1.2 | ColumnxRmonMapPort | read-write | mandatory | The port the statistics will come from. |
| 1.3.6.1.4.1.33.31.3.1.3 | ColumnxRmonMapIfIndex | read-only | mandatory | The interface index (ifIndex) corresponding to this statistics table. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AddressType | INTEGER { unknown(1), other(2), local(3), ip(4), ethernet(5) } | ||
| AutonomousType | OBJECT IDENTIFIER | ||
| BigMetric | INTEGER (1..'FFFFFF'h) | ||
| BridgeId | OCTET STRING (SIZE (8)) | ||
| ChassisType | INTEGER { other(1), mx45xx(2), net9000(3), net9000SWITCH(4) } | ||
| DateTime | OCTET STRING (SIZE (8)) | ||
| DdpAddress | OCTET STRING (SIZE (3)) | ||
| DesignatedRouterPriority | INTEGER (0..'FF'h) | ||
| DialogStatus | INTEGER { none(1), fileTooLarge(2), notImageFile(3), notExecutableFile(4), badFileData(5), deviceWriteProtected(6), operationTimeout(7), remoteFileNotFound(8), remoteFileAccessViolation(9), protocolError(10), fileSystemError(11), temporaryResourceConflict(12), success(13) } | ||
| DisplayString | OCTET STRING | ||
| DLCI | INTEGER | ||
| EntryStatus | INTEGER { valid(1), createRequest(2), underCreation(3), invalid(4) } | ||
| ExistState | INTEGER { off(1), on(2) } | ||
| HardwareType | INTEGER { unknown(1), em1608(29), ir7520(30), ir9020(31), ir7020(32), mxTServJ8(33), mxTservJ16(34), mxManF2(35), mx1500(36), mx1100(37), mx1800(38), mxNpcP1(39), mxTsrLJ16(40), mxTsrvLJ8(41), mxTsrvMj8(42), mxTsrvNJ8(43), mxTsrvOJ8(44), mx1400(45), mx6510(46), mxRb2(47), mx1500x8(49), mx1710(50), mx2710(51), ts3395(52), mx1120(53), mx1520(54), mx1820(55), mx2220(56), mx3510(57), mx6625(58), mx2120(59), mx6020(60), mx3610(61), etsmim(62), mx3010(63), mx6025(64), lannetTs(65), fn1500(66), dpXp1(67), mx3710(68), mx3210(69), mx6710(70), mx6220(71), mx1600a(74), mx1450(75), ts720(76), so3395aTs(77), mx1608(78), mx2210a(79), br401(80), mx6800a(81), notApplicable(83), rp210(84), mx6800b(85), mx1620(86), mx2240(87), ps3m(88), lb2Wan(89), nio1600(90), asy160(91), mx1640(92), br220(93), rp211(94), br221(95), mx2210b(96), mx1600b(97), mx1600c(98), mx800a(99), mx1600d(100), tokenRing(101), mx800b(102), br501(103), br350(105), br350ExpansionSlot(107), n3000(108), br402(109), sw610(110), sw610S(111), br501s(112), br501c(113), br501sc(114), routeRunnerIsdnSt(115), routeRunner(116), mx1608a(117), routerRunnerIsdnU(118), mx1608b(119), mx1604(120), n3000Ias(123), irMgr0Rdc(124), ir9040(125), ir7040(126), irMgr0(127), irM800(128), irM700(129), ir8020(130), ir8040(131), ir7004(132), ir7008(133), ir8004(134), ir8008(135), irM900(136), irMGR0AC(137), irMGR0AC-IN(138), ir9004(139), ir9008(140), n3000SP(230) } | ||
| HelloRange | INTEGER (1..'FFFF'h) | ||
| IfIndexType | INTEGER (1..2147483647) | ||
| Index | INTEGER | ||
| InstancePointer | OBJECT IDENTIFIER | ||
| InterfaceIndex | INTEGER | ||
| IOType | INTEGER { io616(16), dualE175(32), dualT1(33), bri8(34), io351d(35), io352d(36), dualE1120(37), singleT1(38), singleE175(39), singleE1120(40), io625(128), io626(129), io601(144), io602(145), io603(146), io601A(147), io602A(148), io603A(149), io604(150), io621(155), io622(156), io623(157), io624(158), io301x12(160), io521(174), io522(175), io512x3(176), io511x3(177), io520(178), io514(179), io513(180), io470x4(182), io469x2(183), io467x4(184), io467x2(185), io468x4(186), io468x2(187), io466x4(188), io465x2(189), io464x4(190), io463x2(191), io201(192), io202(193), io204(194), io203(195), io251(196), io231(197), io254(198), io206(199), io253(200), io256(201), io201a(202), io202a(203), io203a(204), ioRepeater(207), io205x12(209), io205(210), io255(214), io722(224), io721(225), io411(226), io724(227), io725(231), io723(232), io462(233), io412(234), ioTS16a(235), ioTS16b(236), io461(237), io101(238), io119(239) } | ||
| Letter | INTEGER { a(1), b(2), c(3), d(4), e(5), f(6), g(7), h(8), i(9), j(10), k(11), l(12), m(13), n(14), o(15), p(16), q(17), r(18), s(19), t(20), u(21), v(22), w(23), x(24), y(25), z(26) } | ||
| MacAddress | OCTET STRING (SIZE (6)) | ||
| Metric | INTEGER (1..'FFFF'h) | ||
| NetworkType | INTEGER { unknown(1), other(2), ethernet(3), tokenRing(4), fddi(5), wan(6), ethernetRepeater(7), tokenRingConcentrator(8), fddiConcentrator(9), atm(10), isdn(11), switchplane(12), switchedEthernet(13) } | ||
| PhivAddr | OCTET STRING (SIZE (2)) | ||
| PhivCounter | INTEGER | ||
| PhysAddress | OCTET STRING | ||
| PositiveInteger | INTEGER (1..'FFFFFFFF'h) | ||
| Repeater | INTEGER { notApplicable(1), repeater1(2), repeater2(3), repeater3(4) } | ||
| Segment | INTEGER { a(1), b(2), c(3), d(4), e(5), f(6), g(7), h(8), i(9), j(10), k(11), l(12), m(13), n(14), o(15), p(16), q(17), r(18), s(19), t(20), u(21), v(22), w(23), x(24), y(25), z(26), disabled(27), notApplicable(28) } | ||
| SerialNumber | OCTET STRING (SIZE (0..6)) | ||
| SoftwareType | INTEGER { terminalServer(1), bridge(3), repeater(4), bridgeRouter(5), router(6), bridgeRouterRepeater(7), switch(8), oem(9) } | ||
| Status | INTEGER { enabled (1), disabled (2) } | ||
| SupportedProtocol | INTEGER { iso8473(129), ip(204) } | ||
| Timeout | INTEGER | ||
| TOSType | INTEGER (0..31) | ||
| TruthValue | INTEGER { true (1), false (2) } | ||
| TypedAddress | OCTET STRING (SIZE (1..32)) | ||
| UpToMaxAge | INTEGER (1..3600) | ||
| Validation | INTEGER { valid (1), invalid (2) } | ||
| X121Address | OCTET STRING (SIZE(0..17)) |