InterSeptor-MIB
175 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.19011 | Nodejacarta | |||
| 1.3.6.1.4.1.19011.1 | Nodeproduct | |||
| 1.3.6.1.4.1.19011.1.3 | NodewebAppliance | |||
| 1.3.6.1.4.1.19011.1.3.1 | NodeinSept | |||
| 1.3.6.1.4.1.19011.1.3.1.1 | NodeinSeptObjects | |||
| 1.3.6.1.4.1.19011.1.3.1.1.1 | NodeinSeptIdent | |||
| 1.3.6.1.4.1.19011.1.3.1.1.1.1 | ScalarinSeptIdentManufacturer | read-only | mandatory | The name of the interSeptor manufacturer. |
| 1.3.6.1.4.1.19011.1.3.1.1.1.2 | ScalarinSeptIdentModel | read-only | mandatory | The interSeptor Model designation. |
| 1.3.6.1.4.1.19011.1.3.1.1.1.3 | ScalarinSeptIdentAgentSoftwareVersion | read-only | mandatory | The interSeptor software/firmware version. |
| 1.3.6.1.4.1.19011.1.3.1.1.1.4 | ScalarinSeptIdentName | read-write | mandatory | A string identifying the interSeptor. This object should be set by the administrator. |
| 1.3.6.1.4.1.19011.1.3.1.1.2 | NodeinSeptConfig | |||
| 1.3.6.1.4.1.19011.1.3.1.1.2.1 | ScalarinSeptConfigMibVersion | read-only | mandatory | The version of MIB spec. |
| 1.3.6.1.4.1.19011.1.3.1.1.2.2 | NodeinSeptConfigNetwork | |||
| 1.3.6.1.4.1.19011.1.3.1.1.2.2.1 | ScalarinSeptConfigIpAddress | read-write | mandatory | The ip address that NMS can identify the managed device |
| 1.3.6.1.4.1.19011.1.3.1.1.2.2.2 | ScalarinSeptConfigGateway | read-write | mandatory | The default gateway that allows the device to be managed through routers |
| 1.3.6.1.4.1.19011.1.3.1.1.2.2.3 | ScalarinSeptConfigSubnetMask | read-write | mandatory | Internet address subnet mask |
| 1.3.6.1.4.1.19011.1.3.1.1.2.3 | NodeinSeptConfigDateTime | |||
| 1.3.6.1.4.1.19011.1.3.1.1.2.3.1 | ScalarinSeptConfigDate | read-write | mandatory | The date in inSept, format is (dd/mm/yyyy) |
| 1.3.6.1.4.1.19011.1.3.1.1.2.3.2 | ScalarinSeptConfigTime | read-write | mandatory | The time in interSeptor, format is (hh:mm:ss) |
| 1.3.6.1.4.1.19011.1.3.1.1.2.3.3 | ScalarinSeptConfigTimeFromNtp | read-write | mandatory | Enable/disable update date/time from NTP server. |
| 1.3.6.1.4.1.19011.1.3.1.1.2.3.4 | ScalarinSeptConfigNtpIpAddress | read-write | mandatory | NTP IP address. |
| 1.3.6.1.4.1.19011.1.3.1.1.2.3.5 | ScalarinSeptConfigNtpTimeZone | read-write | mandatory | Enable/disable update date/time from NTP server. |
| 1.3.6.1.4.1.19011.1.3.1.1.2.3.6 | ScalarinSeptConfigDayLightSaving | read-write | mandatory | Enable/disable daylight saving for NTP time, if enabled, the time get from NTP will be set set one hour in advance to reflect daylight saving status. |
| 1.3.6.1.4.1.19011.1.3.1.1.2.4 | NodeinSeptConfigLog | |||
| 1.3.6.1.4.1.19011.1.3.1.1.2.4.1 | ScalarinSeptConfigHistoryLogFrequency | read-write | mandatory | The frequency of the update of the history log. The value is in seconds |
| 1.3.6.1.4.1.19011.1.3.1.1.2.4.2 | ScalarinSeptConfigExtHistoryLogFrequency | read-write | mandatory | The frequency of the update of the extended history log. The value is in seconds |
| 1.3.6.1.4.1.19011.1.3.1.1.2.4.3 | ScalarinSeptConfigConfigurationLog | read-write | mandatory | Enable/disable inSept to log parameter change. |
| 1.3.6.1.4.1.19011.1.3.1.1.2.5 | ScalarinSeptConfigDhcpStatue | read-write | mandatory | Enable or disable DHCP/BootP capability |
| 1.3.6.1.4.1.19011.1.3.1.1.2.6 | ScalarinSeptConfigPingStatue | read-write | mandatory | Enable or disable Ping Echo capability |
| 1.3.6.1.4.1.19011.1.3.1.1.2.7 | ScalarinSeptConfigTftpStatue | read-write | mandatory | Enable or disable TFTP network upgrade capability |
| 1.3.6.1.4.1.19011.1.3.1.1.2.8 | NodeinSeptConfigTelnet | |||
| 1.3.6.1.4.1.19011.1.3.1.1.2.8.1 | ScalarinSeptConfigTelnetStatue | read-write | mandatory | Enable or disable telnet access |
| 1.3.6.1.4.1.19011.1.3.1.1.2.8.2 | ScalarinSeptConfigTelnetPortNumber | read-write | mandatory | Setting the server port of telnet. |
| 1.3.6.1.4.1.19011.1.3.1.1.2.9 | NodeinSeptConfigHttp | |||
| 1.3.6.1.4.1.19011.1.3.1.1.2.9.1 | ScalarinSeptConfigHttpStatue | read-write | mandatory | Enable or disable HTTP access |
| 1.3.6.1.4.1.19011.1.3.1.1.2.9.2 | ScalarinSeptConfigHttpPortNumber | read-write | mandatory | Setting the server port of HTTP. |
| 1.3.6.1.4.1.19011.1.3.1.1.2.9.3 | ScalarinSeptConfigHttpSecurity | read-write | mandatory | Enable/disable HTTP access for read-only users |
| 1.3.6.1.4.1.19011.1.3.1.1.2.10 | NodeinSeptConfigSnmp | |||
| 1.3.6.1.4.1.19011.1.3.1.1.2.10.1 | ScalarinSeptConfigSnmpStatue | read-write | mandatory | Enable or disable SNMP access |
| 1.3.6.1.4.1.19011.1.3.1.1.2.10.2 | ScalarinSeptConfigSnmpPortNumber | read-write | mandatory | Setting the server port of SNMP. |
| 1.3.6.1.4.1.19011.1.3.1.1.2.11 | NodeinSeptConfigControl | |||
| 1.3.6.1.4.1.19011.1.3.1.1.2.11.1 | ScalarinSeptConfigResetToDefault | read-write | mandatory | Reset all parameters of interSeptor to default value |
| 1.3.6.1.4.1.19011.1.3.1.1.2.11.2 | ScalarinSeptConfigRestart | read-write | mandatory | Restart interSeptor |
| 1.3.6.1.4.1.19011.1.3.1.1.2.12 | NodeinSeptConfigTrap | |||
| 1.3.6.1.4.1.19011.1.3.1.1.2.12.1 | ScalarinSeptConfigTrapRetryCount | read-write | mandatory | The count of repeat traps to send to NMS before trap acknowledgement is received. |
| 1.3.6.1.4.1.19011.1.3.1.1.2.12.2 | ScalarinSeptConfigTrapRetryTime | read-write | mandatory | The time between retrying to send traps to NMS. |
| 1.3.6.1.4.1.19011.1.3.1.1.2.12.3 | ScalarinSeptConfigTrapAckSignature | read-write | mandatory | The signature of trap acknowledgement. |
| 1.3.6.1.4.1.19011.1.3.1.1.2.13 | ScalarinSeptConfigPollRate | read-write | mandatory | The frequency that interSeptor updates readings from sensors (unit : second). |
| 1.3.6.1.4.1.19011.1.3.1.1.2.14 | TableinSeptConfigTrapsReceiversTable | not-accessible | mandatory | A list of managers to send traps to. The number of entries is given by the value of inSeptConfigNumTrapReceivers |
| 1.3.6.1.4.1.19011.1.3.1.1.2.14.1 | RowinSeptConfigTrapsReceiversEntry | not-accessible | mandatory | The managers to send traps to. |
| 1.3.6.1.4.1.19011.1.3.1.1.2.14.1.1 | ColumninSepttrapsIndex | read-only | mandatory | The index to a trap receiver entry. |
| 1.3.6.1.4.1.19011.1.3.1.1.2.14.1.2 | ColumninSepttrapsReceiverAddr | read-write | mandatory | The IP address of the manager to send a trap to. |
| 1.3.6.1.4.1.19011.1.3.1.1.2.14.1.3 | ColumninSeptreceiverCommunityString | read-write | mandatory | The community name to use in the trap when sent to the manager. |
| 1.3.6.1.4.1.19011.1.3.1.1.2.14.1.4 | ColumninSeptreceiverSeverityLevel | read-write | mandatory | The severity level of traps to be received by this manager. |
| 1.3.6.1.4.1.19011.1.3.1.1.2.14.1.5 | ColumninSeptreceiverDescription | read-write | mandatory | Description of trap receivers |
| 1.3.6.1.4.1.19011.1.3.1.1.2.15 | TableinSeptConfigAccessControlTable | not-accessible | mandatory | A list of managers which can access interSeptor with private community string. |
| 1.3.6.1.4.1.19011.1.3.1.1.2.15.1 | RowinSeptConfigAccessControlEntry | not-accessible | mandatory | The managers. |
| 1.3.6.1.4.1.19011.1.3.1.1.2.15.1.1 | ColumnaccessIndex | read-only | mandatory | The index to a access control entry. |
| 1.3.6.1.4.1.19011.1.3.1.1.2.15.1.2 | ColumnaccessControlAddr | read-write | mandatory | The IP address of the manager to access interSeptor |
| 1.3.6.1.4.1.19011.1.3.1.1.2.15.1.3 | ColumnaccessCommunityString | read-write | mandatory | The community name to use in the manager when access interSeptor |
| 1.3.6.1.4.1.19011.1.3.1.1.2.15.1.4 | ColumnaccessControlMode | read-write | mandatory | Access type, only read/Write access type can change parameter of interSeptor |
| 1.3.6.1.4.1.19011.1.3.1.1.2.16 | ScalarinSeptConfigTemperatureUnit | read-write | mandatory | The temperature unit of the system, can be Celsius or Farenheit |
| 1.3.6.1.4.1.19011.1.3.1.1.2.17 | ScalarinSeptConfigDateFormat | read-write | mandatory | The date format of the system, can be dd/mm/yyyy or mm/dd/yyyy |
| 1.3.6.1.4.1.19011.1.3.1.1.3 | NodeinSeptsensorMonitor | |||
| 1.3.6.1.4.1.19011.1.3.1.1.3.1 | ScalarinSeptsensorMonitorSensorNumber | read-only | mandatory | The number of sensors that can be monitored. |
| 1.3.6.1.4.1.19011.1.3.1.1.3.2 | TableinSeptsensorMonitorSensorTable | not-accessible | mandatory | A list of sensor devices to be monitored. |
| 1.3.6.1.4.1.19011.1.3.1.1.3.2.1 | RowinSeptsensorMonitorSensorEntry | not-accessible | mandatory | The sensor device. |
| 1.3.6.1.4.1.19011.1.3.1.1.3.2.1.1 | ColumninSeptsensorMonitorDeviceIndex | read-only | mandatory | The index to a sensor device entry. |
| 1.3.6.1.4.1.19011.1.3.1.1.3.2.1.2 | ColumninSeptsensorMonitorDeviceStatus | read-only | mandatory | The device type connected to interSeptor. |
| 1.3.6.1.4.1.19011.1.3.1.1.3.2.1.3 | ColumninSeptsensorMonitorDeviceTemperature | read-only | mandatory | The temperature of sensor on device interSeptor, the unit is 0.1 degree. |
| 1.3.6.1.4.1.19011.1.3.1.1.3.2.1.4 | ColumninSeptsensorMonitorDeviceTemperatureAlarm | read-only | mandatory | The alarm type of sensor on device interSeptor. |
| 1.3.6.1.4.1.19011.1.3.1.1.3.2.1.5 | ColumninSeptsensorMonitorDeviceHumidity | read-only | mandatory | The humidity of sensor on device interSeptor, the unit is 0.1%. |
| 1.3.6.1.4.1.19011.1.3.1.1.3.2.1.6 | ColumninSeptsensorMonitorDeviceHumidityAlarm | read-only | mandatory | The alarm type of sensor on device interSeptor. |
| 1.3.6.1.4.1.19011.1.3.1.1.3.2.1.7 | ColumninSeptsensorMonitorAlarm1 | read-only | mandatory | The device status of sensor 1 connected to interSeptor. |
| 1.3.6.1.4.1.19011.1.3.1.1.3.2.1.8 | ColumninSeptsensorMonitorAlarm2 | read-only | mandatory | The device status of sensor 2 connected to interSeptor. |
| 1.3.6.1.4.1.19011.1.3.1.1.4 | NodeinSeptsensorConfig | |||
| 1.3.6.1.4.1.19011.1.3.1.1.4.1 | ScalarinSeptsensorConfigSensorNumber | read-only | mandatory | The number of sensors that are connected to interSeptor. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.2 | TableinSeptsensorConfigSensorTable | not-accessible | mandatory | A list of sensor devices to be configured. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.2.1 | RowinSeptsensorConfigSensorEntry | not-accessible | mandatory | The sensor device. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.2.1.1 | ColumninSeptsensorConfigDeviceIndex | read-only | mandatory | The index to a sensor device entry. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.2.1.2 | ColumninSeptsensorConfigDeviceName | read-write | mandatory | The name of the sensor device for identification. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.2.1.3 | ColumninSeptsensorConfigDeviceState | read-write | mandatory | The setup of sensor device type. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3 | NodeinSeptsensorConfigSensor1 | |||
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.1 | ScalarinSeptsensorConfigSensor1DeviceName | read-write | mandatory | The name of sensor device. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.2 | ScalarinSeptsensorConfigSensor1DeviceState | read-write | mandatory | The setup of sensor device type. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.3 | NodeinSeptsensorConfigSensor1Temperature | |||
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.3.1 | ScalarinSeptsensorConfigSensor1TemperatureName | read-write | mandatory | The temperature sensor name. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.3.2 | ScalarinSeptsensorConfigSensor1TemperatureLowWarning | read-write | mandatory | The set point to trigger low warning alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.3.3 | ScalarinSeptsensorConfigSensor1TemperatureLowCritical | read-write | mandatory | The threshold to trigger low critical alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.3.4 | ScalarinSeptsensorConfigSensor1TemperatureHighWarning | read-write | mandatory | The threshold to trigger high warning alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.3.5 | ScalarinSeptsensorConfigSensor1TemperatureHighCritical | read-write | mandatory | The threshold to trigger high critical alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.3.6 | ScalarinSeptsensorConfigSensor1TemperatureHysteresis | read-write | mandatory | The set value to prevent too many alarms when temperature is hovering around the set threshold. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.3.7 | ScalarinSeptsensorConfigSensor1TemperatureCalibration | read-write | mandatory | The set value to get the correct temperature according to your reference temperature. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.3.8 | ScalarinSeptsensorConfigSensor1TemperatureLowWarningStatus | read-write | mandatory | Enable/disable the set point to trigger low warning alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.3.9 | ScalarinSeptsensorConfigSensor1TemperatureLowCriticalStatus | read-write | mandatory | Enable/disable the set point to trigger low critical alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.3.10 | ScalarinSeptsensorConfigSensor1TemperatureHighWarningStatus | read-write | mandatory | Enable/disable the set point to trigger high warning alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.3.11 | ScalarinSeptsensorConfigSensor1TemperatureHighCriticalStatus | read-write | mandatory | Enable/disable the set point to trigger high critical alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.4 | NodeinSeptsensorConfigSensor1Humidity | |||
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.4.1 | ScalarinSeptsensorConfigSensor1HumdityName | read-write | mandatory | The humidity sensor name. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.4.2 | ScalarinSeptsensorConfigSensor1HumidityLowWarning | read-write | mandatory | The set point to trigger low warning alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.4.3 | ScalarinSeptsensorConfigSensor1HumidityLowCritical | read-write | mandatory | The threshole to trigger low critical alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.4.4 | ScalarinSeptsensorConfigSensor1HumidityHighWarning | read-write | mandatory | The threshold to trigger high warning alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.4.5 | ScalarinSeptsensorConfigSensor1HumidityHighCritical | read-write | mandatory | The threshold to trigger high critical alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.4.6 | ScalarinSeptsensorConfigSensor1HumidityHysteresis | read-write | mandatory | The set value to prevent too many alarms when Humidity is hovering around the set threshold. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.4.7 | ScalarinSeptsensorConfigSensor1HumidityCalibration | read-write | mandatory | The set value to get the correct temperature according to your reference temperature. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.4.8 | ScalarinSeptsensorConfigSensor1HumidityLowWarningStatus | read-write | mandatory | Enable/disable the set point to trigger low warning alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.4.9 | ScalarinSeptsensorConfigSensor1HumidityLowCriticalStatus | read-write | mandatory | Enable/disable the set point to trigger low critical alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.4.10 | ScalarinSeptsensorConfigSensor1HumidityHighWarningStatus | read-write | mandatory | Enable/disable the set point to trigger high warning alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.4.11 | ScalarinSeptsensorConfigSensor1HumidityHighCriticalStatus | read-write | mandatory | Enable/disable the set point to trigger high critical alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.5 | NodeinSeptsensorConfigSensor1Alarm1 | |||
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.5.1 | ScalarinSeptsensorConfigSensor1Alarm1Name | read-write | mandatory | The name of alarm-1. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.5.2 | ScalarinSeptsensorConfigSensor1Alarm1State | read-write | mandatory | Setup the signal type to trigger alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.5.3 | ScalarinSeptsensorConfigSensor1Alarm1Hysteresis | read-write | mandatory | The set value to delay the alarm triggered when event occurs. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.6 | NodeinSeptsensorConfigSensor1Alarm2 | |||
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.6.1 | ScalarinSeptsensorConfigSensor1Alarm2Name | read-write | mandatory | The name of alarm-1. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.6.2 | ScalarinSeptsensorConfigSensor1Alarm2State | read-write | mandatory | Setup the signal type to trigger alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.6.3 | ScalarinSeptsensorConfigSensor1Alarm2Hysteresis | read-write | mandatory | The set value to delay the alarm triggered when event occurs. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.4 | NodeinSeptsensorConfigSensor2 | |||
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.1 | ScalarinSeptsensorConfigSensor2DeviceName | read-write | mandatory | The name of sensor device. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.2 | ScalarinSeptsensorConfigSensor2DeviceState | read-write | mandatory | The setup of sensor device type. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.3 | NodeinSeptsensorConfigSensor2Temperature | |||
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.3.1 | ScalarinSeptsensorConfigSensor2TemperatureName | read-write | mandatory | The temperature sensor name. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.3.2 | ScalarinSeptsensorConfigSensor2TemperatureLowWarning | read-write | mandatory | The set point to trigger low warning alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.3.3 | ScalarinSeptsensorConfigSensor2TemperatureLowCritical | read-write | mandatory | The threshold to trigger low critical alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.3.4 | ScalarinSeptsensorConfigSensor2TemperatureHighWarning | read-write | mandatory | The threshold to trigger high warning alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.3.5 | ScalarinSeptsensorConfigSensor2TemperatureHighCritical | read-write | mandatory | The threshold to trigger high critical alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.3.6 | ScalarinSeptsensorConfigSensor2TemperatureHysteresis | read-write | mandatory | The set value to prevent too many alarms when temperature is hovering around the set threshold. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.3.7 | ScalarinSeptsensorConfigSensor2TemperatureCalibration | read-write | mandatory | The set value to get the correct temperature according to your reference temperature. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.3.8 | ScalarinSeptsensorConfigSensor2TemperatureLowWarningStatus | read-write | mandatory | Enable/disable the set point to trigger low warning alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.3.9 | ScalarinSeptsensorConfigSensor2TemperatureLowCriticalStatus | read-write | mandatory | Enable/disable the set point to trigger low critical alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.3.10 | ScalarinSeptsensorConfigSensor2TemperatureHighWarningStatus | read-write | mandatory | Enable/disable the set point to trigger high warning alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.3.11 | ScalarinSeptsensorConfigSensor2TemperatureHighCriticalStatus | read-write | mandatory | Enable/disable the set point to trigger high critical alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.4 | NodeinSeptsensorConfigSensor2Humidity | |||
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.4.1 | ScalarinSeptsensorConfigSensor2HumdityName | read-write | mandatory | The humidity sensor name. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.4.2 | ScalarinSeptsensorConfigSensor2HumidityLowWarning | read-write | mandatory | The set point to trigger low warning alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.4.3 | ScalarinSeptsensorConfigSensor2HumidityLowCritical | read-write | mandatory | The threshold to trigger low critical alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.4.4 | ScalarinSeptsensorConfigSensor2HumidityHighWarning | read-write | mandatory | The threshold to trigger high warning alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.4.5 | ScalarinSeptsensorConfigSensor2HumidityHighCritical | read-write | mandatory | The threshold to trigger high critical alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.4.6 | ScalarinSeptsensorConfigSensor2HumidityHysteresis | read-write | mandatory | The set value to prevent too many alarms when Humidity is hovering around the set threshold. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.4.7 | ScalarinSeptsensorConfigSensor2HumidityCalibration | read-write | mandatory | The set value to get the correct temperature according to your reference temperature. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.4.8 | ScalarinSeptsensorConfigSensor2HumidityLowWarningStatus | read-write | mandatory | Enable/disable the set point to trigger low warning alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.4.9 | ScalarinSeptsensorConfigSensor2HumidityLowCriticalStatus | read-write | mandatory | Enable/disable the set point to trigger low critical alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.4.10 | ScalarinSeptsensorConfigSensor2HumidityHighWarningStatus | read-write | mandatory | Enable/disable the set point to trigger high warning alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.4.11 | ScalarinSeptsensorConfigSensor2HumidityHighCriticalStatus | read-write | mandatory | Enable/disable the set point to trigger high critical alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.5 | NodeinSeptsensorConfigSensor2Alarm1 | |||
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.5.1 | ScalarinSeptsensorConfigSensor2Alarm1Name | read-write | mandatory | The name of alarm-1. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.5.2 | ScalarinSeptsensorConfigSensor2Alarm1State | read-write | mandatory | Setup the signal type to trigger alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.5.3 | ScalarinSeptsensorConfigSensor2Alarm1Hysteresis | read-write | mandatory | The set value to delay the alarm triggered when event occurs. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.6 | NodeinSeptsensorConfigSensor2Alarm2 | |||
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.6.1 | ScalarinSeptsensorConfigSensor2Alarm2Name | read-write | mandatory | The name of alarm-1. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.6.2 | ScalarinSeptsensorConfigSensor2Alarm2State | read-write | mandatory | Setup the signal type to trigger alarm. |
| 1.3.6.1.4.1.19011.1.3.1.1.4.4.6.3 | ScalarinSeptsensorConfigSensor2Alarm2Hysteresis | read-write | mandatory | The set value to delay the alarm triggered when event occurs. |
| 1.3.6.1.4.1.19011.1.3.1.2 | NodeinSeptTraps | |||
| 1.3.6.1.4.1.19011.1.3.1.2.1 | NodeinSeptCommunicationRestored | INFORMATION: Communication between interSeptor and sensor has been established. | ||
| 1.3.6.1.4.1.19011.1.3.1.2.2 | NodeinSeptCommunicationLost | WARNING: Communication between interSeptor and sensor has been lost. | ||
| 1.3.6.1.4.1.19011.1.3.1.2.3 | NodeinSeptAlarm1Inactive | INFORMATION: Alarm1 of sensor has returned from active state. | ||
| 1.3.6.1.4.1.19011.1.3.1.2.4 | NodeinSeptAlarm1Active | WARNING: Alarm1 has become active. | ||
| 1.3.6.1.4.1.19011.1.3.1.2.5 | NodeinSeptAlarm2Inactive | INFORMATION: Alarm2 of sensor has returned from active state. | ||
| 1.3.6.1.4.1.19011.1.3.1.2.6 | NodeinSeptAlarm2Active | WARNING: Alarm2 has become active. | ||
| 1.3.6.1.4.1.19011.1.3.1.2.7 | NodeinSeptTemperatureNotHighWarning | INFORMATION: The temperature of sensor has returned from High warning to normal. | ||
| 1.3.6.1.4.1.19011.1.3.1.2.8 | NodeinSeptTemperatureHighWarning | WARNING: The temperature of sensor is higher than High warning set point. | ||
| 1.3.6.1.4.1.19011.1.3.1.2.9 | NodeinSeptTemperatureNotLowWarning | INFORMATION: The temperature of sensor has returned from low warning to normal. | ||
| 1.3.6.1.4.1.19011.1.3.1.2.10 | NodeinSeptTemperatureLowWarning | WARNING: The temperature of sensor is lower than low warning set point. | ||
| 1.3.6.1.4.1.19011.1.3.1.2.11 | NodeinSeptTemperatureNotHighCritical | INFORMATION: The temperature of sensor is lower than high critical set point. | ||
| 1.3.6.1.4.1.19011.1.3.1.2.12 | NodeinSeptTemperatureHighCritical | CRITICAL: The temperature of sensor is higher than high critical set point. | ||
| 1.3.6.1.4.1.19011.1.3.1.2.13 | NodeinSeptTemperatureNotLowCritical | INFORMATION: The temperature of sensor is higher than low critical set point. | ||
| 1.3.6.1.4.1.19011.1.3.1.2.14 | NodeinSeptTemperatureLowCritical | CRITICAL: The temperature of sensor is lower than low critical set point. | ||
| 1.3.6.1.4.1.19011.1.3.1.2.15 | NodeinSeptHumidityNotHighWarning | INFORMATION: The humidity of sensor has returned from High warning to normal. | ||
| 1.3.6.1.4.1.19011.1.3.1.2.16 | NodeinSeptHumidityHighWarning | WARNING: The humidity of sensor is higher than High warning set point. | ||
| 1.3.6.1.4.1.19011.1.3.1.2.17 | NodeinSeptHumidityNotLowWarning | INFORMATION: The humidity of sensor has returned from low warning to normal. | ||
| 1.3.6.1.4.1.19011.1.3.1.2.18 | NodeinSeptHumidityLowWarning | WARNING: The humidity of sensor is lower than low warning set point. | ||
| 1.3.6.1.4.1.19011.1.3.1.2.19 | NodeinSeptHumidityNotHighCritical | INFORMATION: The humidity of sensor is lower than high critical set point. | ||
| 1.3.6.1.4.1.19011.1.3.1.2.20 | NodeinSeptHumidityHighCritical | CRITICAL: The humidity of sensor is higher than high critical set point. | ||
| 1.3.6.1.4.1.19011.1.3.1.2.21 | NodeinSeptHumidityNotLowCritical | INFORMATION: The humidity of sensor is higher than low critical set point. | ||
| 1.3.6.1.4.1.19011.1.3.1.2.22 | NodeinSeptHumidityLowCritical | CRITICAL: The humidity of sensor is lower than low critical set point. |