Juniper-MPLS-MIB
222 objects
The MultiProtocol Label Switching (MPLS) MIB for the Juniper Networks enterprise. This MIB contains managed objects for basic MPLS configuration of: 1. Global tasks - common MPLS usage configurations on a given label switching router (LSR). 2. Interface tasks - MPLS interface (major interface) configurations. 3. Tunnel tasks - tunnel interface (minor interface) configurations. 4. Tunnel profile tasks - configured to be used by multiple MPLS tunnels. 5. Explicit paths - supports dynamic and manual configurations of explicit paths. 6. VPNs - supports constraint-based routing label distribution protocol (CR-LDP) and BGP/MPLS virtual private network (VPN) configurations.
Imported Objects
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| Juniper-MIBs | juniMibs |
| Juniper-TC | JuniNextIfIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.54 | IdentityjuniMplsMIB | The MultiProtocol Label Switching (MPLS) MIB for the Juniper Networks enterprise. This MIB contains managed objects for basic MPLS configuration of: 1. Global … | ||
| 1.3.6.1.4.1.4874.2.2.54.1 | NodejuniMplsObjects | |||
| 1.3.6.1.4.1.4874.2.2.54.1.1 | NodejuniMplsLsrGlobalConfig | |||
| 1.3.6.1.4.1.4874.2.2.54.1.1.1 | NodejuniMplsGroup | |||
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.1 | ScalarjuniMplsGroupMplsEnable | read-write | current | Enables or disables MPLS on the virtual router. When MPLS is created on the virtual router (VR), it remains adminstratively disabled untill it is enabled expli… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.2 | ScalarjuniMplsGroupReopTimer | read-write | current | All LSPs setup in MPLS domain are reoptimized for better LSPs as and when available. This object allows configuration of the frequency of reoptimization in tim… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.3 | ScalarjuniMplsGroupLabelRangeLow | read-write | current | The lower end of the range of the platform label space from which the interfaces on a given LSR derive their label space. Ethernet interfaces can use only plat… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.4 | ScalarjuniMplsGroupLabelRangeHigh | read-write | current | The higher end of the range of the platform label space from which the interfaces on a given LSR derive their label space. Ethernet interfaces can use only pla… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.5 | ScalarjuniMplsGroupLspRetryTimesNoroute | read-write | current | This object configures the number of retries for LSP setup after a failure due to no available route. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.6 | ScalarjuniMplsGroupLspRetryIntervalNoroute | read-write | current | This object configures the time interval between two successive LSP setup retries after a failure due to no available route. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.7 | ScalarjuniMplsGroupLspRetryTimes | read-write | current | Use this object to configure number of retries for LSP setup after a failure other than one due to no available route. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.8 | ScalarjuniMplsGroupLspRetryInterval | read-write | current | Use this object to configure the time interval between two LSP setup retries after a failure other than one due to no available route. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.9 | ScalarjuniMplsGroupLdpRetryTimesNoroute | read-write | obsolete | Use this object to configure the number of retries for LDP to setup LSP after a failure due to no available route. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.10 | ScalarjuniMplsGroupLdpRetryIntervalNoroute | read-write | obsolete | Use this object to configure the time interval between two successive LSP setup retries by LDP after a failure due to no available route. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.11 | ScalarjuniMplsGroupLdpRetryTimes | read-write | obsolete | Use this object to configure LSP setup retries by LDP after a failure other than one due to no available route. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.12 | ScalarjuniMplsGroupLdpRetryInterval | read-write | current | Use this object to configure time interval between two LSP setup retries by LDP after a failure other than one due to no available route. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.13 | ScalarjuniMplsGroupLdpSessionRetries | read-write | current | Use this object to configure the number of LDP session retries. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.14 | ScalarjuniMplsGroupLdpSessionRetryTimer | read-write | current | Use this object to configure the time interval between two LDP session retries. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.15 | ScalarjuniMplsGroupTopologyDrivenIpProfileName | read-write | current | Usually IP interfaces are stacked on top of the MPLS tunnels. The profiled tunnels are associated with IP interfaces with profile of IP interfaces. This object… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.16 | ScalarjuniMplsGroupTopologyDrivenLdpEgressIpIntf | read-write | current | This object allows enabling/disabling of IP interfaces created over egress LSPs setup by topology driven LSP setup configurations. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.17 | ScalarjuniMplsGroupTopologyDrivenLdpIngressIpIntf | read-write | current | This object allows enabling/disabling of IP interfaces created over ingress LSPs setup by topology driven LSP setup configurations. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.18 | ScalarjuniMplsGroupTopologyDrivenLdpEgressIpIntfHostOnly | read-write | current | This object allows enabling/disabling of IP interfaces created over egress LSPs to host only IP addresses setup by topology driven LSP setup configurations. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.19 | ScalarjuniMplsGroupTopologyDrivenLdpIngressIpIntfHostOnly | read-write | current | This object allows enabling/disabling of IP interfaces created over ingress LSPs to host only IP addresses setup by topology driven LSP setup configurations. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.20 | ScalarjuniMplsGroupTopologyDrivenLdpEgressIpIntfPolicyListType | read-write | current | There are two types of policy list type defined for the locally defined labels advertisement to neighbors; viz. accessList and prefixList. This object allows c… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.21 | ScalarjuniMplsGroupTopologyDrivenLdpIngressIpIntfPolicyListType | read-write | current | There are two types of policy list type defined for the locally defined labels advertisement to neighbors; viz. accessList and prefixList. This object allows c… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.22 | ScalarjuniMplsGroupTopologyDrivenLdpEgressIpIntfPolicyList | read-write | current | This object used to configure egress list name of topology driven LSPs over IP interfaces. For successful configurations the egress list name must be set cunnc… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.23 | ScalarjuniMplsGroupTopologyDrivenLdpIngressIpIntfPolicyList | read-write | current | This object used to configure ingress list name of topology driven LSPs over IP interfaces. For successful configurations ingress listname set cunncurently wit… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.24 | ScalarjuniMplsGroupTopologyDrivenLdp | read-write | current | LDP is used for label distributions control for setting up the LSPs. Topology driven LSPs also setup using LDP label distribution control. This object allows t… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.25 | ScalarjuniMplsGroupLspLabelDistCtrlMode | read-only | current | Some FECs correspond to address prefixes which are distributed via a dynamic routing algorithm. The setup of the LSPs for these FECs can be done in one of two … |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.26 | ScalarjuniMplsGroupLdpAdvHostOnly | read-write | current | This object allows to enable/disable LDP label advertisement mode for host only LSPs. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.27 | ScalarjuniMplsGroupLsrState | read-only | current | This object value displays the status of MPLS enabled LSR such as state is up or down etc. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.28 | ScalarjuniMplsGroupReopNow | read-write | current | All LSPs setup in MPLS domain are reoptimized for better LSPs as and when available. Setting this object forces an immediate check for better paths for the exi… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.29 | ScalarjuniMplsGroupIpTtlPropagate | read-write | current | Indicate the IP TTL propagation status on ingress LSPs. none - Not set to anything. hideForwardedAndLocal - Hide LSP topology from local and forwarded traffic.… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.2 | NodejuniMplsGroupList | |||
| 1.3.6.1.4.1.4874.2.2.54.1.1.2.1 | TablejuniMplsGroupTargetedHelloSendTable | not-accessible | current | This table contains list of send side IP addresses for LDP targeted hello messages. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.2.1.1 | RowjuniMplsGroupTargetedHelloSendEntry | not-accessible | current | Each entry represents send IP address for targeted hello message. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.2.1.1.1 | ColumnjuniMplsGroupTargetedHelloSendAddress | not-accessible | current | Configure the send side address for targeted hello messages. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.2.1.1.2 | ColumnjuniMplsGroupLdpTargetedHelloSendMode | read-create | current | Select mode to add/delete to the list of IP addresses for targeted hello messages. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.2.2 | TablejuniMplsGroupTargetedHelloReceiveTable | not-accessible | current | This table contains list of receive side IP addresses for LDP targeted hello messages. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.2.2.1 | RowjuniMplsGroupTargetedHelloReceiveEntry | not-accessible | current | Each entry represents receive IP address for targeted hello message. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.2.2.1.1 | ColumnjuniMplsGroupTargetedHelloReceiveAddress | not-accessible | current | Configure the receive side address for targeted hello messages. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.2.2.1.2 | ColumnjuniMplsGroupLdpTargetedHelloReceiveMode | read-create | current | Select mode to add/delete to the list of IP addresses for targeted hello messages. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.2.3 | TablejuniMplsGroupLdpLabelAdverRouteListTable | not-accessible | current | Table is a list of LDP label advertisement entries. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.2.3.1 | RowjuniMplsGroupLdpLabelAdverRouteListEntry | not-accessible | current | Each entry represents access list pairs for the LDP peers label advertisement. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.2.3.1.1 | ColumnjuniMplsGroupLdpLabelAdverRouteListName | not-accessible | current | This LDP label advertisement route list name for which this entry contains information. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.2.3.1.2 | ColumnjuniMplsGroupLdpLabelAdverNbrListName | not-accessible | current | The LDP label advertisement neighbor route list name for which this entry contains information. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.2.3.1.3 | ColumnjuniMplsGroupLabelAdverListMode | read-create | current | This object selects the mode of addition/deletion to the list. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.2.4 | TablejuniMplsGroupLdpProfileTable | not-accessible | current | Table is a list of LDP Profile entries. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.2.4.1 | RowjuniMplsGroupLdpProfileEntry | not-accessible | current | Each entry represents one LDP profile settings. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.2.4.1.1 | ColumnjuniMplsGroupLdpProfileName | not-accessible | current | LDP profile name identifies unique entry in the table. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.2.4.1.2 | ColumnjuniMplsGroupLdpProfileHelloHoldTime | read-create | current | Configure the LDP peers hello hold time period. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.2.4.1.3 | ColumnjuniMplsGroupLdpProfileCrLdpAdminState | read-create | obsolete | Enable or disable the constraint-based routing label distribution protocol (CR-LDP) admin state. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.2.4.1.4 | ColumnjuniMplsGroupLdpProfileRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.54.1.1.2.5 | TablejuniMplsGroupRsvpProfileTable | not-accessible | current | Table is a list of LDP Profile entries. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.2.5.1 | RowjuniMplsGroupRsvpProfileEntry | not-accessible | current | Each entry represents one LDP profile settings. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.2.5.1.1 | ColumnjuniMplsGroupRsvpProfileName | not-accessible | current | The RSVP profile name identifies unique entry in the table. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.2.5.1.2 | ColumnjuniMplsGroupRsvpProfileRefreshPeriod | read-create | current | Configure the time out period between the generation of two refresh messages. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.2.5.1.3 | ColumnjuniMplsGroupRsvpProfileCleanupTimeoutFactor | read-create | current | Confgure the number of refresh messages can be lost before PATH or RESV state is ended. |
| 1.3.6.1.4.1.4874.2.2.54.1.1.2.5.1.4 | ColumnjuniMplsGroupRsvpProfileRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.54.1.2 | NodejuniMplsMajorLayer | |||
| 1.3.6.1.4.1.4874.2.2.54.1.2.1 | NodejuniMplsIfMajorLayer | |||
| 1.3.6.1.4.1.4874.2.2.54.1.2.1.1 | ScalarjuniMplsIfMajorNextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in the juniMplsIfMajorTable. A GET of this object returns the next available ifIndex value to be used to create… |
| 1.3.6.1.4.1.4874.2.2.54.1.2.1.2 | TablejuniMplsIfMajorTable | not-accessible | current | This table contains entries for MPLS Major interfaces present in the system. |
| 1.3.6.1.4.1.4874.2.2.54.1.2.1.2.1 | RowjuniMplsIfMajorEntry | not-accessible | current | Each entry describes the characteristics of an MPLS Major interface. Creating/deleting entries in this table causes corresponding entries to be created/deleted… |
| 1.3.6.1.4.1.4874.2.2.54.1.2.1.2.1.1 | ColumnjuniMplsIfMajorIndex | not-accessible | current | The ifIndex of the MPLS Major interface. When creating entries in this table, suitable values for this object are determined by reading juniMplsIfMajorNextIfIn… |
| 1.3.6.1.4.1.4874.2.2.54.1.2.1.2.1.2 | ColumnjuniMplsIfMajorRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.54.1.2.1.2.1.3 | ColumnjuniMplsIfMajorLowerIfIndex | read-create | current | The ifIndex of an interface over which this MPLS Major interface to be layered. A value of zero indicates no layering. An implementation may choose to require … |
| 1.3.6.1.4.1.4874.2.2.54.1.2.1.2.1.4 | ColumnjuniMplsIfMajorAdminStatus | read-create | current | Use this object to create MPLS major interface stacked over any link layer interface. Lower layer(index) over which major stacks has to be specified for succes… |
| 1.3.6.1.4.1.4874.2.2.54.1.2.1.2.1.5 | ColumnjuniMplsIfMajorLdpAdminStatus | read-create | current | This object enables/disables LDP admin status on the MPLS interface. |
| 1.3.6.1.4.1.4874.2.2.54.1.2.1.2.1.6 | ColumnjuniMplsIfMajorLdpProfileName | read-create | current | All the LDP settings on the MPLS interface be will associated with the profile. This object allows to associate those configured settings to interface by using… |
| 1.3.6.1.4.1.4874.2.2.54.1.2.1.2.1.7 | ColumnjuniMplsIfMajorLdpVpiStart | read-create | current | This object is defined to support configurations of interface label space. This configures the start range of the LDP VPI. For successful configuration of inte… |
| 1.3.6.1.4.1.4874.2.2.54.1.2.1.2.1.8 | ColumnjuniMplsIfMajorLdpVpiStop | read-create | current | This object is defined to support configurations of interface label space. This configures the stop range of the LDP VPI. For successful configuration of inter… |
| 1.3.6.1.4.1.4874.2.2.54.1.2.1.2.1.9 | ColumnjuniMplsIfMajorLdpVciStart | read-create | current | This object is defined to support configurations of interface label space. This configures the start range of the LDP VCI. For successful configuration of inte… |
| 1.3.6.1.4.1.4874.2.2.54.1.2.1.2.1.10 | ColumnjuniMplsIfMajorLdpVciStop | read-create | current | This object is defined to support configurations of interface label space. This configures the stop range of the LDP VCI. For successful configuration of inter… |
| 1.3.6.1.4.1.4874.2.2.54.1.2.1.2.1.11 | ColumnjuniMplsIfMajorRsvpAdminStatus | read-create | current | This object configures RSVP admin status for MPLS interface. |
| 1.3.6.1.4.1.4874.2.2.54.1.2.1.2.1.12 | ColumnjuniMplsIfMajorRsvpProfileName | read-create | current | All the RSVP settings on the MPLS interface be will associated with the profile. This object allows to associate those configured settings to interface by usin… |
| 1.3.6.1.4.1.4874.2.2.54.1.2.1.2.1.13 | ColumnjuniMplsIfMajorRsvpVpiStart | read-create | current | This object is defined to support configurations of interface label space. This configures the start range of the RSVP VPI. For successful configuration of int… |
| 1.3.6.1.4.1.4874.2.2.54.1.2.1.2.1.14 | ColumnjuniMplsIfMajorRsvpVpiStop | read-create | current | This object is defined to support configurations of interface label space. This configures the stop range of the RSVP VPI. For successful configuration of inte… |
| 1.3.6.1.4.1.4874.2.2.54.1.2.1.2.1.15 | ColumnjuniMplsIfMajorRsvpVciStart | read-create | current | This object is defined to support configurations of interface label space. This configures the start range of the RSVP VCI. For successful configuration of int… |
| 1.3.6.1.4.1.4874.2.2.54.1.2.1.2.1.16 | ColumnjuniMplsIfMajorRsvpVciStop | read-create | current | This object is defined to support configurations of interface label space. This configures the stop range of the RSVP VCI. For successful configuration of inte… |
| 1.3.6.1.4.1.4874.2.2.54.1.2.1.2.1.17 | ColumnjuniMplsIfMajorLabelSpaceType | read-only | current | Displays the label space type for the MPLS interface. |
| 1.3.6.1.4.1.4874.2.2.54.1.2.1.2.1.18 | ColumnjuniMplsIfMajorOpState | read-only | current | This object displays MPLS major interface operation state. |
| 1.3.6.1.4.1.4874.2.2.54.1.2.1.2.1.19 | ColumnjuniMplsIfMajorCrLdpAdminState | read-only | obsolete | This object displays the admin state of CR-LDP. |
| 1.3.6.1.4.1.4874.2.2.54.1.3 | NodejuniMplsMinorLayer | |||
| 1.3.6.1.4.1.4874.2.2.54.1.3.1 | NodejuniMplsIfMinorLayer | |||
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.1 | ScalarjuniMplsIfMinorNextIfIndex | read-only | current | Coordinates ifIndex value allocation for entries in the juniMplsIfMinorTable. A GET of this object returns the next available ifIndex value to be used to creat… |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2 | TablejuniMplsIfMinorTable | not-accessible | current | This table contains entries for MPLS Minor interfaces present in the system. |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2.1 | RowjuniMplsIfMinorEntry | not-accessible | current | Each entry describes the characteristics of an MPLS Minor interface. Creating/deleting entries in this table causes corresponding entries for be created/delete… |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2.1.1 | ColumnjuniMplsIfMinorIndex | not-accessible | current | The ifIndex of the MPLS Minor interface. When creating entries in this table, suitable values for this object are determined by reading juniMplsMinorNextIfInde… |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2.1.2 | ColumnjuniMplsIfMinorRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2.1.3 | ColumnjuniMplsIfMinorLowerIfIndex | read-only | current | The ifIndex of an interface over which this MPLS Minor interface is to be layered. A value of zero indicates no layering. As minor interface can be created wit… |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2.1.4 | ColumnjuniMplsIfMinorAdminStatus | read-create | current | With this object minor interface admin status can be enabled/disabled. |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2.1.5 | ColumnjuniMplsIfMinorEndpointAddress | read-create | current | This object configures the IP address of the tunnel destination. This object can be set along with the juniMplsIfMinorEndpointDstMask to configure the tunnel d… |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2.1.6 | ColumnjuniMplsIfMinorEndpointDstMask | read-create | current | This object configures the tunnel destination mask. It can be set along with the juniMplsIfMinorEndpointAddress. |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2.1.7 | ColumnjuniMplsIfMinorTunnelMetricMode | read-create | current | Select the relative or absolute mode to configure the absolute or relative tunnel metric. To set the tunnel to relative metric, juniMplsIfMinorRelativeTunnelMe… |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2.1.8 | ColumnjuniMplsIfMinorAbsoluteTunnelMetric | read-create | current | This object allows configuration of absolute metric values. Refer to juniMplsIfMinorTunnelMetricMode for how set it. |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2.1.9 | ColumnjuniMplsIfMinorRelativeTunnelMetric | read-create | current | This object allows configuration of relative metric values. Refer to juniMplsIfMinorTunnelMetricMode for how set it. |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2.1.10 | ColumnjuniMplsIfMinorLabelDistProto | read-create | obsolete | This object allows to select label distribution protocol. Label distribution protocols are used by two LSRs to negotiate label to FEC binding to set up tunnels. |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2.1.11 | ColumnjuniMplsIfMinorAnnounceToOspf | read-create | current | This object allows to register LSP endpoints to OSPF to next hop calculation. |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2.1.12 | ColumnjuniMplsIfMinorAnnounceToIsis | read-create | current | This object allows to register LSP endpoints to IS-IS for next hop calculation. |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2.1.13 | ColumnjuniMplsIfMinorAnnounceToBgp | read-create | current | This object allows to register LSP endpoints to BGP for next hop calculation. |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2.1.14 | ColumnjuniMplsIfMinorBandwidth | read-create | current | This object allows configuration of bandwidth requirements for the tunnel. |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2.1.15 | ColumnjuniMplsIfMinorAffinity | read-create | current | This object allows configuration of resource class affinity for the tunnel. |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2.1.16 | ColumnjuniMplsIfMinorAffinityMask | read-create | current | This allows to set the resource class affinity mask. Since it is a mask, set along with the affinity for successful configurations. |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2.1.17 | ColumnjuniMplsIfMinorSetupPriority | read-create | current | This object allows configuration of preemption setup priority for the tunnel before and after it has been established. Lower the value higher the priority. |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2.1.18 | ColumnjuniMplsIfMinorHoldingPriority | read-create | current | This object allows configuration of the preemption holding priority for the tunnel before and after it has been established. Lower the value higher the priorit… |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2.1.19 | ColumnjuniMplsIfMinorTunnelName | read-create | current | This object allows configuration of the tunnel name to be associated with tunnel settings. |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2.1.20 | ColumnjuniMplsIfMinorTunnelRetryTimes | read-create | current | This object allows configuration of the number of retries for tunnel setup. |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2.1.21 | ColumnjuniMplsIfMinorTunnelRetryInterval | read-create | current | This object allows configuration of retry interval for tunnel setup. |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2.1.22 | ColumnjuniMplsIfMinorTunnelRetryTimesNoroute | read-create | current | This object allows configuration of the tunnel retries when no route notifications are received. |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2.1.23 | ColumnjuniMplsIfMinorTunnelRetryIntervalNoroute | read-create | current | This object allows configuration of the tunnel retry interval when no route notifications are received. |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2.1.24 | ColumnjuniMplsIfMinorBaseTunnelName | read-create | obsolete | This object allows configuration of the base tunnel name over which all the tunnels are stacked over. |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2.1.25 | ColumnjuniMplsIfMinorVpnOuiNumber | read-create | obsolete | This object allows configuration of the OUI part of VPN ID. |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2.1.26 | ColumnjuniMplsIfMinorVpnIndex | read-create | obsolete | This object allows configuration of the index part of VPN ID. |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2.1.27 | ColumnjuniMplsIfMinorTunnelOpState | read-only | current | This object displays the tunnel operation state. established : Tunnel established teNegotiation : TE Negotiation up : Tunnel Up down : Tunnel Down cfgChanged :… |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2.1.28 | ColumnjuniMplsIfMinorTargetedDynamicTunnel | read-create | obsolete | Configure targeted dynamic tunnel. |
| 1.3.6.1.4.1.4874.2.2.54.1.3.1.2.1.29 | ColumnjuniMplsIfMinorReoptimization | read-create | current | Configure tunnel reoptimization. |
| 1.3.6.1.4.1.4874.2.2.54.1.3.2 | NodejuniMplsMinorLayerList | |||
| 1.3.6.1.4.1.4874.2.2.54.1.3.2.1 | TablejuniMplsIfMinorPathOptionTable | not-accessible | current | Table is a list of different LSP paths as option for each LSP setup. |
| 1.3.6.1.4.1.4874.2.2.54.1.3.2.1.1 | RowjuniMplsIfMinorPathOptionEntry | not-accessible | current | Each entry represents one path option for the LSP. |
| 1.3.6.1.4.1.4874.2.2.54.1.3.2.1.1.1 | ColumnjuniMplsIfMinorPathOptionIndex | not-accessible | current | Minor interface unique ID. |
| 1.3.6.1.4.1.4874.2.2.54.1.3.2.1.1.2 | ColumnjuniMplsIfMinorPathOptionNumber | not-accessible | current | Unique number to identify each path option configured. |
| 1.3.6.1.4.1.4874.2.2.54.1.3.2.1.1.3 | ColumnjuniMplsIfMinorPathOptionProtocol | read-create | current | Select the each path option explicit routing protocol. |
| 1.3.6.1.4.1.4874.2.2.54.1.3.2.1.1.4 | ColumnjuniMplsIfMinorPathOptionLockdown | read-create | current | Enable/disable each configured path option reoptimization. |
| 1.3.6.1.4.1.4874.2.2.54.1.3.2.1.1.5 | ColumnjuniMplsIfMinorPathOptionPathName | read-create | current | Configure the name for each path option. |
| 1.3.6.1.4.1.4874.2.2.54.1.3.2.1.1.6 | ColumnjuniMplsIfMinorPathOptionPathId | read-create | current | Configure the path option ID. Either the name or ID will be associated with a path at a time. If the path name and ID are set at a same time for the path, the … |
| 1.3.6.1.4.1.4874.2.2.54.1.3.2.1.1.7 | ColumnjuniMplsIfMinorPathOptionRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.54.1.4 | NodejuniMplsTunnelProfile | |||
| 1.3.6.1.4.1.4874.2.2.54.1.4.1 | NodejuniMplsTunnelProfileGroup | |||
| 1.3.6.1.4.1.4874.2.2.54.1.4.1.1 | TablejuniMplsTunnelProfileTable | not-accessible | current | Table is a list of tunnel profiles for a given VR. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.1.1.1 | RowjuniMplsTunnelProfileEntry | not-accessible | current | Each entry represents one tunnel profile. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.1.1.1.1 | ColumnjuniMplsTunnelProfileName | not-accessible | current | Associate a name for the configured tunnel profile settings. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.1.1.1.2 | ColumnjuniMplsTunnelProfileAdminStatus | read-create | current | Enable/disable the adminstatus of the tunnel profile. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.1.1.1.3 | ColumnjuniMplsTunnelProfileBaseTunnelName | read-create | obsolete | Configure the base tunnel name in tunnel profile settings. This base tunnel is the one over which all the other tunnels are stacked over. Configured base tunne… |
| 1.3.6.1.4.1.4874.2.2.54.1.4.1.1.1.4 | ColumnjuniMplsTunnelProfileIpProfileName | read-create | current | Configures the name for IP profile settings for the IP interfaces over which MPLS tunnels are stacked. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.1.1.1.5 | ColumnjuniMplsTunnelProfileLabelDistProto | read-create | obsolete | Configure the label distribution protocol to associate with a tunnel profile. Label distribution protocols are used by two LSRs to negotiate label to FEC bindi… |
| 1.3.6.1.4.1.4874.2.2.54.1.4.1.1.1.6 | ColumnjuniMplsTunnelProfileAnnounceToOspf | read-create | current | Configure the routing protocol for next hop calculations as OSPF. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.1.1.1.7 | ColumnjuniMplsTunnelProfileAnnounceToIsis | read-create | current | Configure routing protocol for next hop calculations as ISIS. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.1.1.1.8 | ColumnjuniMplsTunnelProfileAnnounceToBgp | read-create | current | Configure routing protocol for next hop calculations as BGP. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.1.1.1.9 | ColumnjuniMplsTunnelProfileMetricMode | read-create | current | Select the relative or absolute mode to configure the absolute or relative tunnel profile metric. To set the tunnel profile to relative metric, juniMplsTunnelP… |
| 1.3.6.1.4.1.4874.2.2.54.1.4.1.1.1.10 | ColumnjuniMplsTunnelProfileAbsoluteMetric | read-create | current | This object allows configuration of the absolute metric values. Refer to juniMplsTunnelProfileMetricMode for how set it. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.1.1.1.11 | ColumnjuniMplsTunnelProfileRelativeMetric | read-create | current | This object allows configuration of the relative metric values. Refer to juniMplsTunnelProfileMetricMode for how set it. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.1.1.1.12 | ColumnjuniMplsTunnelProfileBandwidth | read-create | current | This object allows configuration of bandwidth requirements for the tunnel. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.1.1.1.13 | ColumnjuniMplsTunnelProfileAffinity | read-create | current | This object allows configuration of the resource class affinity for the tunnel. This can set independently of juniMplsTunnelProfileAffinityMask. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.1.1.1.14 | ColumnjuniMplsTunnelProfileAffinityMask | read-create | current | This allows configuration of which bits in the affinity must match the resource class bits. Can't be set independently; always with juniMplsTunnelProfileAffini… |
| 1.3.6.1.4.1.4874.2.2.54.1.4.1.1.1.15 | ColumnjuniMplsTunnelProfileSetupPriority | read-create | current | This object configuration of the preemption setup priority for the tunnel before and after it has been established. Lower the value higher the priority. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.1.1.1.16 | ColumnjuniMplsTunnelProfileHoldingPriority | read-create | current | This object allows configuration of the preemption holding priority for the tunnel before and after it has been established. Lower the value higher the priorit… |
| 1.3.6.1.4.1.4874.2.2.54.1.4.1.1.1.17 | ColumnjuniMplsTunnelProfileRetryTimes | read-create | current | This object allows configuration of the number of retries for the tunnel setup. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.1.1.1.18 | ColumnjuniMplsTunnelProfileRetryInterval | read-create | current | This object allows configuration of retry interval for tunnel setup. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.1.1.1.19 | ColumnjuniMplsTunnelProfileRetryTimesNoroute | read-create | current | This object allows configuration of the tunnel retries when no route notifications are received. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.1.1.1.20 | ColumnjuniMplsTunnelProfileRetryIntervalNoroute | read-create | current | This object allows configuration of the tunnel retry interval when no route notifications are received. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.1.1.1.21 | ColumnjuniMplsTunnelProfileVpnOuiNumber | read-create | obsolete | This object allows configuration of the OUI part of VPN ID. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.1.1.1.22 | ColumnjuniMplsTunnelProfileVpnIndex | read-create | obsolete | This object allows configuration of the index part of VPN ID. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.1.1.1.23 | ColumnjuniMplsTunnelProfileRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.54.1.4.1.1.1.24 | ColumnjuniMplsTunnelProfileTargetedDynamicTunnel | read-create | obsolete | Configure targeted dynamic tunnel. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.2 | NodejuniMplsTunnelProfileList | |||
| 1.3.6.1.4.1.4874.2.2.54.1.4.2.1 | TablejuniMplsTunnelProfilePathOptionTable | not-accessible | current | Table is a list of different LSP paths as option for each LSP setup, configured as part of tunnel profile settings |
| 1.3.6.1.4.1.4874.2.2.54.1.4.2.1.1 | RowjuniMplsTunnelProfilePathOptionEntry | not-accessible | current | Each entry represents one path option for the LSP setup, configured as a part of tunnel profile settings. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.2.1.1.1 | ColumnjuniMplsTunnelProfileNamePathOption | not-accessible | current | Name of the path option. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.2.1.1.2 | ColumnjuniMplsTunnelProfilePathOptionNumber | not-accessible | current | Unique identifier for the path option. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.2.1.1.3 | ColumnjuniMplsTunnelProfilePathOptionProtocol | read-create | current | Path selection option protocol. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.2.1.1.4 | ColumnjuniMplsTunnelProfilePathOptionLockdown | read-create | current | Enable/disable path selection option reoptimization. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.2.1.1.5 | ColumnjuniMplsTunnelProfilePathOptionPathName | read-create | current | Associate a name with each explicit path. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.2.1.1.6 | ColumnjuniMplsTunnelProfilePathOptionPathId | read-create | current | Each explicit path can be associated either name or ID. This object allows configuration of the ID for the explicit path. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.2.1.1.7 | ColumnjuniMplsTunnelProfilePathOptionRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.54.1.4.2.2 | TablejuniMplsTunnelProfileDynamicEndpointTable | not-accessible | current | This table contains entries for the dynamic endpoints configured for each tunnel profile. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.2.2.1 | RowjuniMplsTunnelProfileDynamicEndpointEntry | not-accessible | current | Dynamic endpoint entries for each tunnel profile. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.2.2.1.1 | ColumnjuniMplsTunnelProfileNameDynamicEndpoint | not-accessible | current | Configure the tunnel dynamic endpoint in tunnel profile settings. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.2.2.1.2 | ColumnjuniMplsTunnelProfileDynamicEndpointType | not-accessible | current | Configure the dynamic endpoint type for the tunnel. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.2.2.1.3 | ColumnjuniMplsTunnelProfileDynamicEndpointPolicyListType | not-accessible | current | This object allows configuration of the dynamic tunnel policy type selection. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.2.2.1.4 | ColumnjuniMplsTunnelProfileDynamicEndpointListName | not-accessible | current | This object allows configuration of the dynamic endpoints access list name. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.2.2.1.5 | ColumnjuniMplsTunnelProfileDynamicEndpointRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.54.1.4.2.3 | TablejuniMplsTunnelProfileTunnelEndpointTable | not-accessible | current | Table contains list of tunnel static enpoints configured for each tunnel profile. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.2.3.1 | RowjuniMplsTunnelProfileTunnelEndpointEntry | not-accessible | current | Each entry represents one static endpoint configuration for the tunnel. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.2.3.1.1 | ColumnjuniMplsTunnelProfileNameTunnelEndpoint | not-accessible | current | This object configures the tunnel profile name. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.2.3.1.2 | ColumnjuniMplsTunnelProfileTunnelEndpointAddress | not-accessible | current | This object configures the IP address of the tunnel destination. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.2.3.1.3 | ColumnjuniMplsTunnelProfileTunnelEndpointDstMask | not-accessible | current | This object configures the tunnel destination mask. A value of 255.255.255.255 is expected. |
| 1.3.6.1.4.1.4874.2.2.54.1.4.2.3.1.4 | ColumnjuniMplsTunnelProfileTunnelEndpointRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.54.1.5 | NodejuniMplsExplicitPath | |||
| 1.3.6.1.4.1.4874.2.2.54.1.5.1 | NodejuniMplsExplicitPathGroup | |||
| 1.3.6.1.4.1.4874.2.2.54.1.5.1.1 | TablejuniMplsExplicitPathTable | not-accessible | current | Table is a list of hops configurations for explicit paths. |
| 1.3.6.1.4.1.4874.2.2.54.1.5.1.1.1 | RowjuniMplsExplicitPathEntry | not-accessible | current | Each entry represents one hop configuration for the particular explicit path. |
| 1.3.6.1.4.1.4874.2.2.54.1.5.1.1.1.1 | ColumnjuniMplsExplicitPathName | not-accessible | current | Configure the name for the explicit path used as table index. |
| 1.3.6.1.4.1.4874.2.2.54.1.5.1.1.1.2 | ColumnjuniMplsExplicitPathAdminState | read-create | current | Enable/disable explicit path adminstatus. |
| 1.3.6.1.4.1.4874.2.2.54.1.5.1.1.1.3 | ColumnjuniMplsExplicitPathRowStatus | read-create | current | Creation/deletion of the explicit path is done through setting this object. |
| 1.3.6.1.4.1.4874.2.2.54.1.5.1.2 | TablejuniMplsExplicitPathNodeTable | not-accessible | current | Table is a list of configured explicit paths. |
| 1.3.6.1.4.1.4874.2.2.54.1.5.1.2.1 | RowjuniMplsExplicitPathNodeEntry | not-accessible | current | Each entry represents one hop in a particular explicit path. |
| 1.3.6.1.4.1.4874.2.2.54.1.5.1.2.1.1 | ColumnjuniMplsExplicitPathNodeName | not-accessible | current | Configure the name for the explicit path used in the table index. |
| 1.3.6.1.4.1.4874.2.2.54.1.5.1.2.1.2 | ColumnjuniMplsExplicitPathNodeIndexNumber | not-accessible | current | Each explicit path hop will have an index associated with it. Configure each path hop index using this object. |
| 1.3.6.1.4.1.4874.2.2.54.1.5.1.2.1.3 | ColumnjuniMplsExplicitPathNodeLoose | read-create | current | Configure the explicit path hop as strict or loose. Set along with HopAddress. |
| 1.3.6.1.4.1.4874.2.2.54.1.5.1.2.1.4 | ColumnjuniMplsExplicitPathNodeHopAddress | read-create | current | Configure the hop IP address to setup explicit path. Explicit path next hop will be created when the mentioned hop IP address doesn't belong to any of the exis… |
| 1.3.6.1.4.1.4874.2.2.54.1.5.1.2.1.5 | ColumnjuniMplsExplicitPathNodeHopAddressMask | read-create | current | Configure the hop IP address mask. Set along with hop address. |
| 1.3.6.1.4.1.4874.2.2.54.1.5.1.2.1.6 | ColumnjuniMplsExplicitPathNodeRowStatus | read-create | current | Use this object for deletion of the node. For node creation, this value have no effect. Setting the node with IP address create the node. To delete the node se… |
| 1.3.6.1.4.1.4874.2.2.54.2 | NodejuniMplsConformance | |||
| 1.3.6.1.4.1.4874.2.2.54.2.1 | NodejuniMplsCompliances | |||
| 1.3.6.1.4.1.4874.2.2.54.2.1.1 | CompliancejuniMplsCompliance | obsolete | Obsolete compliance statement for entities which implement the Juniper MPLS MIB. This statement became obsolete when RowStatus support was added to some of the… | |
| 1.3.6.1.4.1.4874.2.2.54.2.1.2 | CompliancejuniMplsCompliance2 | obsolete | Obsolete compliance statement for entities which implement the Juniper MPLS MIB. This statement became obsolete when the juniMplsGroupIpTtlPropagate object was… | |
| 1.3.6.1.4.1.4874.2.2.54.2.1.3 | CompliancejuniMplsCompliance3 | obsolete | Obsolete compliance statement for entities which implement the Juniper MPLS MIB. This statement become obsolete when the objects juniMplsIfMajorCrLdpAdminState… | |
| 1.3.6.1.4.1.4874.2.2.54.2.1.4 | CompliancejuniMplsCompliance4 | current | The compliance statement for entities which implement the Juniper MPLS MIB. | |
| 1.3.6.1.4.1.4874.2.2.54.2.2 | NodejuniMplsConfGroups | |||
| 1.3.6.1.4.1.4874.2.2.54.2.2.1 | GroupjuniMplsLsrGlobalConfGroup | obsolete | Obsolete collection of objects providing management of MPLS global configurations in a Juniper product. This group became obsolete when the object juniMplsGrou… | |
| 1.3.6.1.4.1.4874.2.2.54.2.2.2 | GroupjuniMplsMajorLayerConfGroup | obsolete | A collection of objects providing management of major MPLS interfaces in a Juniper product. This group became obsolete when the object juniMplsIfMajorCrLdpAdmi… | |
| 1.3.6.1.4.1.4874.2.2.54.2.2.3 | GroupjuniMplsMinorLayerConfGroup | obsolete | Obsolete collection of objects providing management of minor MPLS (tunnel) in a Juniper product. This group became obsolete when the juniMplsIfMinorPathOptionR… | |
| 1.3.6.1.4.1.4874.2.2.54.2.2.4 | GroupjuniMplsTunnelProfileConfGroup | obsolete | Obsolete collection of objects providing management of MPLS tunnel profiles in a Juniper product. This group became obsolete when RowStatus objects were added … | |
| 1.3.6.1.4.1.4874.2.2.54.2.2.5 | GroupjuniMplsExplicitPathConfGroup | current | A collection of objects providing management of MPLS explicit paths in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.54.2.2.6 | GroupjuniMplsMinorLayerConfGroup2 | obsolete | A collection of objects providing management of minor MPLS (tunnel) interfaces in a Juniper product. This group became obsolete when the objects juniMplsIfMino… | |
| 1.3.6.1.4.1.4874.2.2.54.2.2.7 | GroupjuniMplsTunnelProfileConfGroup2 | obsolete | A collection of objects providing management of MPLS tunnel profiles in a Juniper product. This group became oboslete when the objects juniMplsTunnelProfileBas… | |
| 1.3.6.1.4.1.4874.2.2.54.2.2.8 | GroupjuniMplsLsrGlobalConfGroup2 | obsolete | A collection of objects providing management of MPLS label switching routers (LSRs) in a Juniper product. This group became obsolete when the object juniMplsGr… | |
| 1.3.6.1.4.1.4874.2.2.54.2.2.9 | GroupjuniMplsLsrGlobalConfGroup3 | current | A collection of objects providing management of MPLS label switching routers (LSRs) in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.54.2.2.10 | GroupjuniMplsMajorLayerConfGroup2 | current | A collection of objects providing management of major MPLS interfaces in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.54.2.2.11 | GroupjuniMplsMinorLayerConfGroup3 | current | A collection of objects providing management of minor MPLS (tunnel) interfaces in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.54.2.2.12 | GroupjuniMplsTunnelProfileConfGroup3 | current | A collection of objects providing management of MPLS tunnel profiles in a Juniper product |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| JuniMajorCfgVciRanges | Integer32 (33..65535) | current | Generic VCI label range specifier for both resource reservation protocol (RSVP) and label distribution protocol (LDP). |
| JuniMajorCfgVpiRanges | Integer32 (0..255) | current | Generic VPI label range specifier for both resource reservation protocol (RSVP) and label distribution protocol (LDP). |
| JuniMinorCfgBWRanges | Unsigned32 | current | Specifies bandwidth requirements for each MPLS tunnel. |
| JuniMinorCfgHoldingAndSetupPriorityRanges | Integer32 (0..7) | current | Each LSP has a setup and hold priority before setting it up or preempting it relative to the other LSPs. This convention specifies those ranges. |
| JuniMinorCfgRetryIntervalAndNorouteRanges | Integer32 (0..60) | current | RSVP/LDP will have time interval between two successive retries for setting up tunnel successfully. This value specifies the interval ranges for LDP/RSVP with or without no-route notification. |
| JuniMinorCfgRetryTimesAndNorouteRanges | Integer32 (0..65535) | current | RSVP/LDP will have a number of retries for successfully setting up a tunnel. This value specifies retry value ranges for LDP/RSVP with or without no-route notification. |
| JuniProfileCfgBWRanges | Unsigned32 | current | Bandwidth range specified for each tunnel in tunnel profiling. |
| JuniProfileCfgHoldingAndSetupPriorityRanges | Integer32 (0..7) | current | Tunnel setup and hold priority range specified for each tunnel in tunnel profile configuration. |
| JuniProfileCfgRetryIntervalAndNorouteRanges | Integer32 (0..60) | current | Range specified for retry interval for tunnel with or without no-route notification for RSVP/LDP. |
| JuniProfileCfgRetryTimesAndNorouteRanges | Integer32 (0..65535) | current | Range specified for number of retries for tunnel with or without no-route notification for RSVP/LDP. |