Juniper-SMDS-MIB
38 objects
The Switched Multimegabit Data Service (SMDS) MIB for the Juniper Networks enterprise.
Imported Objects
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| Juniper-MIBs | juniMibs |
| Juniper-TC | JuniNextIfIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.50 | IdentityjuniSmdsMIB | The Switched Multimegabit Data Service (SMDS) MIB for the Juniper Networks enterprise. | ||
| 1.3.6.1.4.1.4874.2.2.50.1 | NodejuniSmdsObjects | |||
| 1.3.6.1.4.1.4874.2.2.50.1.1 | ScalarjuniSmdsNextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in juniSmdsIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry… |
| 1.3.6.1.4.1.4874.2.2.50.1.2 | TablejuniSmdsIfTable | not-accessible | current | This table contains entries for SMDS interfaces present in the system. |
| 1.3.6.1.4.1.4874.2.2.50.1.2.1 | RowjuniSmdsIfEntry | not-accessible | current | Each entry describes the characteristics of an SMDS interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in i… |
| 1.3.6.1.4.1.4874.2.2.50.1.2.1.1 | ColumnjuniSmdsIfIndex | not-accessible | current | The ifIndex of the SMDS interface. When creating entries in this table, suitable values for this object are determined by reading juniSmdsNextIfIndex. |
| 1.3.6.1.4.1.4874.2.2.50.1.2.1.2 | ColumnjuniSmdsIfRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.50.1.2.1.3 | ColumnjuniSmdsIfLowerIfIndex | read-create | current | The ifIndex of an interface over which this SMDS interface is to be layered. A value of zero indicates no layering. An implementation may choose to require tha… |
| 1.3.6.1.4.1.4874.2.2.50.1.3 | ScalarjuniSmdsMajorNextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in juniSmdsMajorIfTable. A GET of this object returns the next available ifIndex value to be used to create an … |
| 1.3.6.1.4.1.4874.2.2.50.1.4 | TablejuniSmdsMajorIfTable | not-accessible | current | This table contains entries for SMDS major interfaces present in the system. |
| 1.3.6.1.4.1.4874.2.2.50.1.4.1 | RowjuniSmdsMajorIfEntry | not-accessible | current | Each entry describes the characteristics of an SMDS major interface. Creating/deleting entries in this table causes corresponding entries for be created/delete… |
| 1.3.6.1.4.1.4874.2.2.50.1.4.1.1 | ColumnjuniSmdsMajorIfIndex | not-accessible | current | The ifIndex of the SMDS major interface. When creating entries in this table, suitable values for this object are determined by reading juniSmdsMajorNextIfInde… |
| 1.3.6.1.4.1.4874.2.2.50.1.4.1.2 | ColumnjuniSmdsMajorIfRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.50.1.4.1.3 | ColumnjuniSmdsMajorIfLowerIfIndex | read-create | current | The ifIndex of an interface over which this SMDS major interface is to be layered. A value of zero indicates no layering. An implementation may choose to requi… |
| 1.3.6.1.4.1.4874.2.2.50.1.4.1.4 | ColumnjuniSmdsMajorIfKeepalive | read-create | current | Keepalive interval in seconds. A value of zero disables keepalive. |
| 1.3.6.1.4.1.4874.2.2.50.1.5 | ScalarjuniSmdsSubNextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in juniSmdsSubIfTable. A GET of this object returns the next available ifIndex value to be used to create an en… |
| 1.3.6.1.4.1.4874.2.2.50.1.6 | TablejuniSmdsSubIfTable | not-accessible | current | This table contains entries for SMDS subinterfaces present in the system. |
| 1.3.6.1.4.1.4874.2.2.50.1.6.1 | RowjuniSmdsSubIfEntry | not-accessible | current | Each entry describes the characteristics of an SMDS subinterface. Creating/deleting entries in this table causes corresponding entries for be created/deleted i… |
| 1.3.6.1.4.1.4874.2.2.50.1.6.1.1 | ColumnjuniSmdsSubIfIndex | not-accessible | current | The ifIndex of the SMDS subinterface. When creating entries in this table, suitable values for this object are determined by reading juniSmdsSubNextIfIndex. |
| 1.3.6.1.4.1.4874.2.2.50.1.6.1.2 | ColumnjuniSmdsSubIfRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.50.1.6.1.3 | ColumnjuniSmdsSubIfLowerIfIndex | read-create | current | The ifIndex of an interface over which this SMDS subinterface is to be layered. A value of zero indicates no layering. An implementation may choose to require … |
| 1.3.6.1.4.1.4874.2.2.50.1.6.1.4 | ColumnjuniSmdsSubIfSmdsAddress | read-create | current | The 64 bit E.164 SMDS address that has been assigned to this SMDS subinterface. A value of 0 indicates no address is configured. |
| 1.3.6.1.4.1.4874.2.2.50.1.6.1.5 | ColumnjuniSmdsSubIfSmdsMulticastIpAddress | read-create | current | The 64 bit E.164 SMDS ip multicast address that has been assigned to this SMDS subinterface. A value of 0 indicates no address is configured. |
| 1.3.6.1.4.1.4874.2.2.50.1.6.1.6 | ColumnjuniSmdsSubIfSmdsMulticastArpAddress | read-create | current | The 64 bit E.164 SMDS multicast arp address that has been assigned to this SMDS subinterface. A value of 0 indicates no address is configured. |
| 1.3.6.1.4.1.4874.2.2.50.1.7 | TablejuniSmdsMajorIfStatsTable | not-accessible | current | This table contains entries for SMDS major interface statistics present in the system. |
| 1.3.6.1.4.1.4874.2.2.50.1.7.1 | RowjuniSmdsMajorIfStatsEntry | not-accessible | current | Each entry describes the statistics of an SMDS major interface. |
| 1.3.6.1.4.1.4874.2.2.50.1.7.1.1 | ColumnjuniSmdsMajorIfStatsInKeepaliveRequests | read-only | current | The number of keepalive requests received. |
| 1.3.6.1.4.1.4874.2.2.50.1.7.1.2 | ColumnjuniSmdsMajorIfStatsOutKeepaliveRequests | read-only | current | The number of keepalive requests transmitted. |
| 1.3.6.1.4.1.4874.2.2.50.1.7.1.3 | ColumnjuniSmdsMajorIfStatsInKeepaliveReplies | read-only | current | The number of keepalive replies received. |
| 1.3.6.1.4.1.4874.2.2.50.1.7.1.4 | ColumnjuniSmdsMajorIfStatsOutKeepaliveReplies | read-only | current | The number of keepalive replies transmitted. |
| 1.3.6.1.4.1.4874.2.2.50.1.7.1.5 | ColumnjuniSmdsMajorIfStatsKeepaliveFailures | read-only | current | The number of keepalive failures detected. |
| 1.3.6.1.4.1.4874.2.2.50.4 | NodejuniSmdsConformance | |||
| 1.3.6.1.4.1.4874.2.2.50.4.1 | NodejuniSmdsCompliances | |||
| 1.3.6.1.4.1.4874.2.2.50.4.1.1 | CompliancejuniSmdsCompliance | obsolete | Obsolete compliance statement for entities which implement the Juniper SMDS MIB. This statement became obsolete when support was added for major and sub interf… | |
| 1.3.6.1.4.1.4874.2.2.50.4.1.2 | CompliancejuniSmdsCompliance2 | current | The compliance statement for entities which implement the Juniper SMDS MIB. | |
| 1.3.6.1.4.1.4874.2.2.50.4.2 | NodejuniSmdsGroups | |||
| 1.3.6.1.4.1.4874.2.2.50.4.2.1 | GroupjuniSmdsGroup | obsolete | Obsolete collection of objects providing management of SMDS interfaces in a Juniper product. This group became obsolete when support was added for major and su… | |
| 1.3.6.1.4.1.4874.2.2.50.4.2.2 | GroupjuniSmdsGroup2 | current | A collection of objects providing management of SMDS interfaces in a Juniper product. |