KST-2000AB
38 objects
Module Identity for KST-2000A/B Transceiver.
Imported Objects
| ComtechEFData | comtechEFData |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6247.30 | Identitykst2000AB | Module Identity for KST-2000A/B Transceiver. | ||
| 1.3.6.1.4.1.6247.30.1 | Nodekst2000ABObjects | |||
| 1.3.6.1.4.1.6247.30.1.1 | NodekstSystemInfo | |||
| 1.3.6.1.4.1.6247.30.1.1.1 | ScalarkstEquipmentType | read-only | current | KST Equipment Type. (RET?) |
| 1.3.6.1.4.1.6247.30.1.1.2 | ScalarkstSerialNumbers | read-only | current | KST-2000A/B Serial Numbers. (SNM?) |
| 1.3.6.1.4.1.6247.30.1.1.3 | ScalarkstAssemblyNumbers | read-only | current | KST-2000A/B Assembly Numbers. (ANM?) |
| 1.3.6.1.4.1.6247.30.1.1.4 | ScalarkstFirmwareNumbers | read-only | current | KST-2000A/B Firmware Numbers and Versions. (FRM?) |
| 1.3.6.1.4.1.6247.30.1.2 | NodekstUnitParameters | |||
| 1.3.6.1.4.1.6247.30.1.2.1 | ScalarkstCircuitID | read-write | current | KST-2000A/B Unit Circuit ID. (CID?, CID=) |
| 1.3.6.1.4.1.6247.30.1.2.2 | ScalarkstAgc | read-write | current | KST-2000A/B Unit AGC. (AGC?, AGC=) |
| 1.3.6.1.4.1.6247.30.1.2.3 | ScalarkstRefOscillatorAdjust | read-write | current | KST-2000A/B Reference Oscillator Adjust. (REF?, REF=) |
| 1.3.6.1.4.1.6247.30.1.2.4 | ScalarkstLockMode | read-write | current | KST-2000A/B Lock Mode. (LOK?, LOK=) |
| 1.3.6.1.4.1.6247.30.1.3 | NodekstTxParameters | |||
| 1.3.6.1.4.1.6247.30.1.3.1 | ScalarkstUpConvFrequency | read-write | current | KST-2000A/B Up Converter Frequency. (UFQ?, UFQ=) |
| 1.3.6.1.4.1.6247.30.1.3.2 | ScalarkstUpConvAttenuation | read-write | current | KST-2000A/B Up Converter Attenuation. (UAT?, UAT=) |
| 1.3.6.1.4.1.6247.30.1.3.3 | ScalarkstUpConvOutput | read-write | current | KST-2000A/B Up Converter Output. (UMU?, UMU=) |
| 1.3.6.1.4.1.6247.30.1.3.4 | ScalarkstHpaPowerEnable | read-write | current | KST-2000A/B HPA Power Enable. (AMP?, AMP=) |
| 1.3.6.1.4.1.6247.30.1.3.5 | ScalarkstHpaFaultLogic | read-write | current | KST-2000A/B HPA Fault Logic. (KFE?, KFE=) |
| 1.3.6.1.4.1.6247.30.1.4 | NodekstRxParameters | |||
| 1.3.6.1.4.1.6247.30.1.4.1 | ScalarkstDownConvFrequency | read-write | current | KST-2000A/B Down Converter Frequency. (DFQ?, DFQ=) |
| 1.3.6.1.4.1.6247.30.1.4.2 | ScalarkstDownConvAttenuation | read-write | current | KST-2000A/B Down Converter Attenuation. (DAT?, DAT=) |
| 1.3.6.1.4.1.6247.30.1.4.3 | ScalarkstReceiveBand | read-write | current | KST-2000B Receive Band. (SRB?, SRB=) SRB=x, where x is, A = band 10950 to 11700 MHz B = band 11700 to 12200 MHz C = band 12250 to 12750 MHz |
| 1.3.6.1.4.1.6247.30.1.4.4 | ScalarkstLnaPowerEnable | read-write | current | KST-2000A/B LNA Power Enable. (LCS?, LCS=) |
| 1.3.6.1.4.1.6247.30.1.4.5 | ScalarkstLnaFaultLogic | read-write | current | KST-2000A/B LNA Fault Logic. (LFL?, LFL=) |
| 1.3.6.1.4.1.6247.30.1.5 | NodekstUnitStatus | |||
| 1.3.6.1.4.1.6247.30.1.5.1 | ScalarkstUnitFaultStatus | read-only | current | KST-2000A/B Unit Fault Status. (CFS?, CFS=) CFS=ABCDEFG, where A = Common Equipment Status, 0=OK, 1=FLT B = Reference Status, 0=OK, 1=FLT C = AGC Status, 0=OK,… |
| 1.3.6.1.4.1.6247.30.1.5.2 | ScalarkstCommonEquipmentStatus | read-only | current | KST-2000A/B Common Equipment Status. (CES?, CES=) CES=ABCD, where A = -7V PS Status, 0=OK, 1=FLT B = +7V PS Status, 0=OK, 1=FLT C = +12V PS Status, 0=OK, 1=FLT… |
| 1.3.6.1.4.1.6247.30.1.5.3 | ScalarkstReferenceStatus | read-only | current | KST-2000A/B Reference Status. (CRS?, CRS=) CRS=ABCDEF, where A = REF Source, 0=INT, 1=EXT B = Oscillator State, 0=COLD, 1=WARM C = 72M Lock Status, 0=OK, 1=FLT… |
| 1.3.6.1.4.1.6247.30.1.5.4 | ScalarkstAgcStatus | read-only | current | KST-2000A/B AGC Status. (CAS?, CAS=) CAS=ABC, where A = Loop Convergence, 0=OK, 1=FLT B = Excessive Input Power (EIP), 0=OK, 1=FLT C = Insufficient Input Power… |
| 1.3.6.1.4.1.6247.30.1.5.5 | ScalarkstUpConvStatus | read-only | current | KST-2000A/B Up Converter Status. (CUS?, CUS=) CUS=ABCD, where A = Overtemperature Status, 0=OK, 1=FLT B = L-Band Synthesizer Lock Status, 0=OK, 1=FLT C = Ku-Ba… |
| 1.3.6.1.4.1.6247.30.1.5.6 | ScalarkstDownConvStatus | read-only | current | KST-2000A/B Down Converter Status. (CDS?, CDS=) CDS=ABCD, where A = Overtemperature Status, 0=OK, 1=FLT B = L-Band Synthesizer Lock Status, 0=OK, 1=FLT C = Ku-… |
| 1.3.6.1.4.1.6247.30.1.5.7 | ScalarkstHpaStatus | read-only | current | KST-2000A/B HPA Status. (CHS?, CHS=) CHS=ABCDE, where A = Overtemperature Status, 0=OK, 1=FLT, 2=NA B = +9.5V Status, 0=OK, 1=FLT, 2=NA C = -5V Status, 0=OK, 1… |
| 1.3.6.1.4.1.6247.30.1.5.8 | ScalarkstLnaStatus | read-only | current | KST-2000A/B LNA Status. 0=OK, 1=FLT |
| 1.3.6.1.4.1.6247.30.2 | Nodekst2000ABConformance | |||
| 1.3.6.1.4.1.6247.30.2.1 | Nodekst2000ABGroups | |||
| 1.3.6.1.4.1.6247.30.2.1.1 | Groupkst2000ABObjectsGroup | current | KST-2000A/B Objects Group. | |
| 1.3.6.1.4.1.6247.30.2.2 | Nodekst2000ABCompliances | |||
| 1.3.6.1.4.1.6247.30.2.2.1 | Compliancekst2000ABCompliance | current | KST-2000A/B Compliance. |