LANPLEX-OPT-FDDI-MIB-1-2-2
66 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.114.1.10 | NodelanplexOptFddi | |||
| 1.3.6.1.4.1.114.1.10.1 | NodelpOptSMT | |||
| 1.3.6.1.4.1.114.1.10.1 | NodelpOptSMTHoldCondition | Generated when fddiSMTHoldState (fddimibSMTHoldState) assumes the state holding-prm or holding-sec. This notification is a Condition in the Status Report Proto… | ||
| 1.3.6.1.4.1.114.1.10.1.1 | TablelpOptSMTTable | not-accessible | mandatory | A list of optional SMT entries. The number of entries shall not exceed the value of snmpFddiSMTNumber. |
| 1.3.6.1.4.1.114.1.10.1.1.1 | RowlpOptSMTEntry | not-accessible | mandatory | An optional SMT entry containing information common to a given optional SMT. |
| 1.3.6.1.4.1.114.1.10.1.1.1.1 | ColumnlpOptSMTIndex | read-only | mandatory | A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-in… |
| 1.3.6.1.4.1.114.1.10.1.1.1.2 | ColumnlpOptSMTManufacturerOUI | read-only | mandatory | The three octets of manufacturer data which make up the manufacturerOUI component. |
| 1.3.6.1.4.1.114.1.10.1.1.1.3 | ColumnlpOptSMTManufacturerData | read-only | mandatory | The 29 octets of manufacturer data which make up the manufacturerData component. |
| 1.3.6.1.4.1.114.1.10.1.1.1.4 | ColumnlpOptSMTHoldState | read-only | mandatory | This variable indicates the current state of the Hold function. The value 'not-holding' is the default and initial value. The value must be set to 'not-holding… |
| 1.3.6.1.4.1.114.1.10.1.1.1.5 | ColumnlpOptSMTSetCount | read-only | mandatory | This variable is composed of a count incremented in response to a Set operation on the MIB, and the time of the change, however only the count is reported here… |
| 1.3.6.1.4.1.114.1.10.1.1.1.6 | ColumnlpOptSMTLastSetStationId | read-only | mandatory | The Station ID of the station that effected the last change in the FDDI MIB. |
| 1.3.6.1.4.1.114.1.10.2 | NodelpOptMAC | |||
| 1.3.6.1.4.1.114.1.10.2 | NodelpOptSMTPeerWrapCondition | This condition is active when fddiSMTPeerWrapFlag (fddimibSMTPeerWrapFlag) is set. This notification is a Condition in the Status Report Protocol (see 7.2.7 an… | ||
| 1.3.6.1.4.1.114.1.10.2.1 | TablelpOptMACBridgeFunctionTable | not-accessible | mandatory | A list of MAC bridge function entries. |
| 1.3.6.1.4.1.114.1.10.2.1.1 | RowlpOptMACBridgeFunctionEntry | not-accessible | mandatory | Bridge function information for a given MAC within a given SMT. |
| 1.3.6.1.4.1.114.1.10.2.1.1.1 | ColumnlpOptMACBridgeFunctionSMTIndex | read-only | mandatory | A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-in… |
| 1.3.6.1.4.1.114.1.10.2.1.1.2 | ColumnlpOptMACBridgeFunctionMACIndex | read-only | mandatory | Index variable for uniquely identifying the MAC object instances. |
| 1.3.6.1.4.1.114.1.10.2.1.1.3 | ColumnlpOptMACBridgeFunctions | read-only | mandatory | Indicates the MAC's optional bridging functions. The Value -1 is used to indicate that bridging is not supported by this MAC. The value is a sum. This value in… |
| 1.3.6.1.4.1.114.1.10.2.2 | TablelpOptMACTPriTable | not-accessible | mandatory | A list of MAC T-Pri entries. |
| 1.3.6.1.4.1.114.1.10.2.2.1 | RowlpOptMACTPriEntry | not-accessible | mandatory | A collection of T-Pri information for a given MAC within a given SMT. |
| 1.3.6.1.4.1.114.1.10.2.2.1.1 | ColumnlpOptMACTPriSMTIndex | read-only | mandatory | A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-in… |
| 1.3.6.1.4.1.114.1.10.2.2.1.2 | ColumnlpOptMACTPriMACIndex | read-only | mandatory | Index variable for uniquely identifying the MAC object instances. |
| 1.3.6.1.4.1.114.1.10.2.2.1.3 | ColumnlpOptMACTPri0 | read-only | mandatory | This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units. |
| 1.3.6.1.4.1.114.1.10.2.2.1.4 | ColumnlpOptMACTPri1 | read-only | mandatory | This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units. |
| 1.3.6.1.4.1.114.1.10.2.2.1.5 | ColumnlpOptMACTPri2 | read-only | mandatory | This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units. |
| 1.3.6.1.4.1.114.1.10.2.2.1.6 | ColumnlpOptMACTPri3 | read-only | mandatory | This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units. |
| 1.3.6.1.4.1.114.1.10.2.2.1.7 | ColumnlpOptMACTPri4 | read-only | mandatory | This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units. |
| 1.3.6.1.4.1.114.1.10.2.2.1.8 | ColumnlpOptMACTPri5 | read-only | mandatory | This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units. |
| 1.3.6.1.4.1.114.1.10.2.2.1.9 | ColumnlpOptMACTPri6 | read-only | mandatory | This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units. |
| 1.3.6.1.4.1.114.1.10.3 | NodelpOptMACDuplicateAddressCondition | This condition is active when either fddiMACDA-Flag (fddimibMACDaFlag) or fddiMACUNDA-Flag (fddimibMACUnaDaFlag) is set. This event is handled as a Condition i… | ||
| 1.3.6.1.4.1.114.1.10.3 | NodelpOptPATH | |||
| 1.3.6.1.4.1.114.1.10.3.1 | TablelpOptPATHRingTable | not-accessible | mandatory | A list of PATH ring entries. |
| 1.3.6.1.4.1.114.1.10.3.1.1 | RowlpOptPATHRingEntry | not-accessible | mandatory | Ring latency, trace status, and T-Rmode information for a given PATH within a given SMT. |
| 1.3.6.1.4.1.114.1.10.3.1.1.1 | ColumnlpOptPATHRingSMTIndex | read-only | mandatory | A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-in… |
| 1.3.6.1.4.1.114.1.10.3.1.1.2 | ColumnlpOptPATHRingPATHIndex | read-only | mandatory | Index variable for uniquely identifying the primary, secondary and local PATH object instances. Local PATH object instances are represented with integer values… |
| 1.3.6.1.4.1.114.1.10.3.1.1.3 | ColumnlpOptPATHRingLatency | read-write | mandatory | Gives the total accumulated latency of the ring associated with this path. May be measured directly by the station or calculated by a management station. Value… |
| 1.3.6.1.4.1.114.1.10.3.1.1.4 | ColumnlpOptPATHTraceStatus | read-only | mandatory | This attribute indicates the current trace status of the path. The value is a sum which represents all of the trace status information which applies. This valu… |
| 1.3.6.1.4.1.114.1.10.3.1.1.5 | ColumnlpOptPATHT-Rmode | read-write | mandatory | Used by RMT to limit the duration of restricted dialogs on a path. This object is reported in 1 ns units. |
| 1.3.6.1.4.1.114.1.10.3.2 | TablelpOptPATHSbaTable | not-accessible | mandatory | A list of PATH Sba entries. |
| 1.3.6.1.4.1.114.1.10.3.2.1 | RowlpOptPATHSbaEntry | not-accessible | mandatory | Sba information for a given PATH within a given SMT. |
| 1.3.6.1.4.1.114.1.10.3.2.1.1 | ColumnlpOptPATHSbaSMTIndex | read-only | mandatory | A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-in… |
| 1.3.6.1.4.1.114.1.10.3.2.1.2 | ColumnlpOptPATHSbaPATHIndex | read-only | mandatory | Index variable for uniquely identifying the primary, secondary and local PATH object instances. Local PATH object instances are represented with integer values… |
| 1.3.6.1.4.1.114.1.10.3.2.1.3 | ColumnlpOptPATHSbaPayload | read-write | mandatory | The payload portion of the Synchronous Bandwidth Allocation for thi path. This value represents the maximum number of bytes of data allocated for transmission … |
| 1.3.6.1.4.1.114.1.10.3.2.1.4 | ColumnlpOptPATHSbaOverhead | read-write | mandatory | The overhead portion of the Synchronous Bandwith Allocation for this path. This value repersents the maximum number of bytes overhead (token capture, frame hea… |
| 1.3.6.1.4.1.114.1.10.3.2.1.5 | ColumnlpOptPATHSbaAvailable | read-write | mandatory | This value is the maximum Synchronous Bandwith available for a path in bytes per second. |
| 1.3.6.1.4.1.114.1.10.4 | NodelpOptMACFrameErrorCondition | Generated when the fddiMACFrameErrorRatio (fddimibMACFrameErrorRatio) is greater than or equal to fddiMACFrameErrorThreshold (fddimibMACFrameErrorThreshold). T… | ||
| 1.3.6.1.4.1.114.1.10.4 | NodelpOptPORT | |||
| 1.3.6.1.4.1.114.1.10.4.1 | TablelpOptPORTTable | not-accessible | mandatory | A list of optional PORT entries. |
| 1.3.6.1.4.1.114.1.10.4.1.1 | RowlpOptPORTEntry | not-accessible | mandatory | MAC loop time and EB error count information for a given PORT within a given SMT. |
| 1.3.6.1.4.1.114.1.10.4.1.1.1 | ColumnlpOptPORTSMTIndex | read-only | mandatory | A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-in… |
| 1.3.6.1.4.1.114.1.10.4.1.1.2 | ColumnlpOptPORTIndex | read-only | mandatory | Index variable for uniquely identifying the PORT object instances. |
| 1.3.6.1.4.1.114.1.10.4.1.1.3 | ColumnlpOptPORTMACLoopTime | read-write | mandatory | This attribute controls the value used for T_Next(9) (see 9.4.4.2.3). This object is reported in 1 ns units. |
| 1.3.6.1.4.1.114.1.10.4.1.1.4 | ColumnlpOptPORTEBErrorCt | read-only | mandatory | A count that should as closely as possible match the times an Elasticity Buffer Error has occurred while in active line state. |
| 1.3.6.1.4.1.114.1.10.4.2 | TablelpOptPORTLSTable | not-accessible | mandatory | A list of optional PORT line state entries. |
| 1.3.6.1.4.1.114.1.10.4.2.1 | RowlpOptPORTLSEntry | not-accessible | mandatory | Maintenance line state and PC line state information for a given PORT within a given SMT. |
| 1.3.6.1.4.1.114.1.10.4.2.1.1 | ColumnlpOptPORTLSSMTIndex | read-only | mandatory | A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-in… |
| 1.3.6.1.4.1.114.1.10.4.2.1.2 | ColumnlpOptPORTLSPORTIndex | read-only | mandatory | Index variable for uniquely identifying the PORT object instances. |
| 1.3.6.1.4.1.114.1.10.4.2.1.3 | ColumnlpOptPORTMaintLS | read-write | mandatory | The PORT Maintenance Line State specifies the line state (Maint_LS) to be transmitted when the PCM state machine for the port is in state PC9 Maint. |
| 1.3.6.1.4.1.114.1.10.4.2.1.4 | ColumnlpOptPORTPCLS | read-only | mandatory | This attribute indicates the line state (PC_LS) received by the port. |
| 1.3.6.1.4.1.114.1.10.5 | NodelpOptMACNotCopiedCondition | Generated when the fddiMACNotCopiedRatio (fddimibMACNotCopiedRatio) is greater than or equal to the fddiMACNotCopiedThreshold (lpOptMACNotCopiedThreshold). Thi… | ||
| 1.3.6.1.4.1.114.1.10.6 | NodelpOptMACNeighborChangeEvent | Generated when a change in a MAC's upstream neighbor address or downstream neighbor address is detected. (see 7.2.7 and 8.3). | ||
| 1.3.6.1.4.1.114.1.10.7 | NodelpOptMACPathChangeEvent | This event is generated when the value of the fddiMACCurrentPath (fddimibMACCurrentPath) changes. This event shall be supressed if the value changes from isola… | ||
| 1.3.6.1.4.1.114.1.10.8 | NodelpOptPORTLerCondition | This condition becomes active when the value of fddiPORTLer-Estimate (fddimibPORTLerEstimate) is less than or equal to fddiPORTLer-Alarm (fddimibPORTLerAlarm).… | ||
| 1.3.6.1.4.1.114.1.10.9 | NodelpOptPORTUndesiredConnAttemptEvent | Generated when an undesired connection attempt has been made (see 5.2.4, 7.2.7, and 8.3). | ||
| 1.3.6.1.4.1.114.1.10.10 | NodelpOptPORTEBErrorCondition | Generated when the Elasticity Buffer Error-Ct (lpOptPORTEBErrorCt) increments. This is handled as a condition in the Status Report Protocol. It is generated wh… | ||
| 1.3.6.1.4.1.114.1.10.11 | NodelpOptPORTPathChangeEvent | This event is generated when the value of the fddiPORTCurrentPath (lpOptPORTCurrentPath) changes. This event shall be surpressed if the value changes from isol… |