LBHUB-BLC-MIB
161 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 0.0 | ScalarifExtnsChipSet | read-only | mandatory | |
| 0.0 | NodeunknownChipSet | |||
| 1.3.6.1.2.1 | Nodemib-2 | |||
| 1.3.6.1.2.1.1 | Nodesystem | |||
| 1.3.6.1.2.1.2 | Nodeinterfaces | |||
| 1.3.6.1.2.1.3 | Nodeat | |||
| 1.3.6.1.2.1.4 | Nodeip | |||
| 1.3.6.1.2.1.5 | Nodeicmp | |||
| 1.3.6.1.2.1.7 | Nodeudp | |||
| 1.3.6.1.2.1.8 | Nodeegp | |||
| 1.3.6.1.2.1.9 | Nodecmot | |||
| 1.3.6.1.2.1.10 | Nodetransmission | |||
| 1.3.6.1.2.1.10.7 | Nodedot3 | |||
| 1.3.6.1.2.1.10.7.1 | Tabledot3Table | not-accessible | mandatory | Status information and control variables for a collection of ethernet-like interfaces attached to a particular system. |
| 1.3.6.1.2.1.10.7.1.1 | Rowdot3Entry | not-accessible | mandatory | Status information and control variables for a particular interface to an ethernet-like medium. |
| 1.3.6.1.2.1.10.7.1.1.1 | Columndot3Index | read-only | mandatory | An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same inter… |
| 1.3.6.1.2.1.10.7.1.1.2 | Columndot3InitializeMac | read-write | mandatory | The initialization status of the MAC and PLS (Physical Layer Signalling) subsystems for a particular interface. The value initialized(1) signifies that the sub… |
| 1.3.6.1.2.1.10.7.1.1.3 | Columndot3MacSubLayerStatus | read-write | mandatory | The operational status of the MAC sublayer for a particular interface. The value enabled(1) signifies that the MAC sublayer for said interface is operational f… |
| 1.3.6.1.2.1.10.7.1.1.4 | Columndot3MulticastReceiveStatus | read-write | mandatory | The multicast receive status for a particular interface. The value enabled(1) signifies that reception of multicast frames by the MAC sublayer is enabled on sa… |
| 1.3.6.1.2.1.10.7.1.1.5 | Columndot3TxEnabled | read-write | mandatory | The transmit layer management state variable (transmitEnabled as defined in [9]) for a particular interface. The value true(1) signifies that the MAC frame tra… |
| 1.3.6.1.2.1.10.7.1.1.6 | Columndot3TestTdrValue | read-only | mandatory | The number of 10 MHz ticks which elapsed between the beginning of a TDR measurement and the collision which ended it, for the most recently executed TDR test. … |
| 1.3.6.1.2.1.10.7.2 | Tabledot3StatsTable | not-accessible | mandatory | Statistics for a collection of ethernet-like interfaces attached to a particular system. |
| 1.3.6.1.2.1.10.7.2.1 | Rowdot3StatsEntry | not-accessible | mandatory | Statistics for a particular interface to an ethernet-like medium. |
| 1.3.6.1.2.1.10.7.2.1.1 | Columndot3StatsIndex | read-only | mandatory | An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same inter… |
| 1.3.6.1.2.1.10.7.2.1.2 | Columndot3StatsAlignmentErrors | read-only | mandatory | A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented b… |
| 1.3.6.1.2.1.10.7.2.1.3 | Columndot3StatsFCSErrors | read-only | mandatory | A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an… |
| 1.3.6.1.2.1.10.7.2.1.4 | Columndot3StatsSingleCollisionFrames | read-only | mandatory | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision. A frame that is counted by a… |
| 1.3.6.1.2.1.10.7.2.1.5 | Columndot3StatsMultipleCollisionFrames | read-only | mandatory | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by… |
| 1.3.6.1.2.1.10.7.2.1.6 | Columndot3StatsSQETestErrors | read-only | mandatory | A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section … |
| 1.3.6.1.2.1.10.7.2.1.7 | Columndot3StatsDeferredTransmissions | read-only | mandatory | A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instanc… |
| 1.3.6.1.2.1.10.7.2.1.8 | Columndot3StatsLateCollisions | read-only | mandatory | The number of times that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet. Five hundred and twelve … |
| 1.3.6.1.2.1.10.7.2.1.9 | Columndot3StatsExcessiveCollisions | read-only | mandatory | A count of frames for which transmission on a particular interface fails due to excessive collisions. |
| 1.3.6.1.2.1.10.7.2.1.10 | Columndot3StatsInternalMacTransmitErrors | read-only | mandatory | A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance… |
| 1.3.6.1.2.1.10.7.2.1.11 | Columndot3StatsCarrierSenseErrors | read-only | mandatory | The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface. The count repres… |
| 1.3.6.1.2.1.10.7.2.1.12 | Columndot3StatsExcessiveDeferrals | read-only | mandatory | A count of frames for which transmission on a particular interface is deferred for an excessive period of time. |
| 1.3.6.1.2.1.10.7.2.1.13 | Columndot3StatsFrameTooLongs | read-only | mandatory | A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incre… |
| 1.3.6.1.2.1.10.7.2.1.14 | Columndot3StatsInRangeLengthErrors | read-only | mandatory | A count of frames received on a particular interface with a length field value that falls between the minimum unpadded LLC data size and the maximum allowed LL… |
| 1.3.6.1.2.1.10.7.2.1.15 | Columndot3StatsOutOfRangeLengthFields | read-only | mandatory | A count of frames received on a particular interface for which the length field value exceeds the maximum allowed LLC data size. The count represented by an in… |
| 1.3.6.1.2.1.10.7.2.1.16 | Columndot3StatsInternalMacReceiveErrors | read-only | mandatory | A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of … |
| 1.3.6.1.2.1.10.7.8 | Nodedot3ChipSets | |||
| 1.3.6.1.2.1.10.7.8.1 | Nodedot3ChipSetAMD | |||
| 1.3.6.1.2.1.10.7.8.1.1 | Nodedot3ChipSetAMD7990 | |||
| 1.3.6.1.2.1.11 | Nodesnmp | |||
| 1.3.6.1.2.1.12 | NodeifExtensions | |||
| 1.3.6.1.2.1.12.1 | TableifExtnsTable | not-accessible | mandatory | A list of interfaces extension entries. The number of entries is given by the value of ifNumber, defined in [4,6]. |
| 1.3.6.1.2.1.12.1.1 | RowifExtnsEntry | not-accessible | mandatory | An extension to the interfaces entry, defined in [4,6], containing additional objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.2.1.12.1.1.1 | ColumnifExtnsIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains extended management information. The value of this object for a particular inte… |
| 1.3.6.1.2.1.12.1.1.3 | ColumnifExtnsRevWare | read-only | mandatory | An arbitrary octet string that describes the firmware version of this interface. It is intended that this should be human readable. It must only contain ASCII … |
| 1.3.6.1.2.1.12.1.1.4 | ColumnifExtnsMulticastsTransmittedOks | read-only | mandatory | The count of frames successfully transmitted to a subnetwork or link-layer multicast destination address other than a broadcast address. For a MAC layer protoc… |
| 1.3.6.1.2.1.12.1.1.5 | ColumnifExtnsBroadcastsTransmittedOks | read-only | mandatory | The count of frames successfully transmitted to a subnetwork or link-layer broadcast addresses. It does not include frames sent to a multicast address. |
| 1.3.6.1.2.1.12.1.1.6 | ColumnifExtnsMulticastsReceivedOks | read-only | mandatory | The count of frames successfully received that are directed to an active subnetwork or link-layer multicast address (for a MAC layer protocol, this includes bo… |
| 1.3.6.1.2.1.12.1.1.7 | ColumnifExtnsBroadcastsReceivedOks | read-only | mandatory | The count of frames successfully received that are directed to a subnetwork or link-layer broadcast address. This does not include frames received with errors. |
| 1.3.6.1.2.1.12.1.1.8 | ColumnifExtnsPromiscuous | read-only | mandatory | This object has a value of false(2) if this interface only accepts packets/frames that are addressed to this station. This object has a value of true(1) when t… |
| 1.3.6.1.2.1.12.3 | TableifExtnsRcvAddrTable | not-accessible | mandatory | This table contains an entry for each address (broadcast, multicast, or uni-cast) for which the system will receive packets/ frames on a particular interface. … |
| 1.3.6.1.2.1.12.3.1 | RowifExtnsRcvAddrEntry | not-accessible | mandatory | A list of objects identifying an address for which the system will accept packets/ frames on a particular interface. |
| 1.3.6.1.2.1.12.3.1.1 | ColumnifExtnsRcvAddrIfIndex | read-only | mandatory | The value of ifIndex, defined in [4,6], of an interface which recognizes this entry's address. |
| 1.3.6.1.2.1.12.3.1.2 | ColumnifExtnsRcvAddress | read-only | mandatory | An address for which the system will accept packets/frames on this entry's interface. |
| 1.3.6.1.2.1.12.3.1.3 | ColumnifExtnsRcvAddrStatus | read-write | mandatory | This object has the value nonVolatile(4) for those entries in the table which are valid and will not be deleted by the next restart of the managed system. Entr… |
| 1.3.6.1.2.1.17 | Nodedot1dBridge | |||
| 1.3.6.1.2.1.17.1 | Nodedot1dBase | |||
| 1.3.6.1.2.1.17.1 | NodenewRoot | The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new… | ||
| 1.3.6.1.2.1.17.2 | Nodedot1dStp | |||
| 1.3.6.1.2.1.17.2 | NodetopologyChange | A topologyChange trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding … | ||
| 1.3.6.1.2.1.17.4 | Nodedot1dTp | |||
| 1.3.6.1.2.1.17.5 | Nodedot1dStatic | |||
| 1.3.6.1.4 | Nodeprivate | |||
| 1.3.6.1.4.1 | Nodeenterprises | |||
| 1.3.6.1.4.1.43 | Nodea3Com | |||
| 1.3.6.1.4.1.43.1 | Nodeproducts | |||
| 1.3.6.1.4.1.43.1.4 | Nodebrouter | |||
| 1.3.6.1.4.1.43.1.4.3 | NodelBridgeECS | |||
| 1.3.6.1.4.1.43.1.4.3.1 | NodefilteringDataBaseFull | The filtering database within the bridge has become overloaded or full. | ||
| 1.3.6.1.4.1.43.1.4.3.2 | NodepermanentDataBaseFull | The maximum number of permanent entries in the filtering database has been exceeded. | ||
| 1.3.6.1.4.1.43.1.4.3.3 | NodeaccessGroupViolation | A recent attempt has been made to violate the access groups in the bridge. | ||
| 1.3.6.1.4.1.43.12 | Nodeblc | |||
| 1.3.6.1.4.1.43.12.1 | NodeblcAgent | |||
| 1.3.6.1.4.1.43.12.1.1 | ScalarblcAgentIpAddr | read-write | mandatory | The network management module's administrative IpAddress. The current operational IpAddress can be obtained from the ipAdEntAddr entry in the ipAddrTable. |
| 1.3.6.1.4.1.43.12.1.2 | ScalarblcAgentIpNetmask | read-write | mandatory | The network management module's administrative subnet mask. The current operational subnet mask can be obtained from the ipAdEntNetMask entry in the ipAddrTabl… |
| 1.3.6.1.4.1.43.12.1.3 | ScalarblcAgentIpBroadAddr | read-write | mandatory | The network management module's adminstrative default broadcast address |
| 1.3.6.1.4.1.43.12.1.4 | ScalarblcAgentDefaultGateway | read-write | mandatory | The network management module's administrative default gateway IpAddress. The current operational default gateway's IpAddress can be obtained from the ipRoutin… |
| 1.3.6.1.4.1.43.12.1.5 | ScalarblcAgentMACAddress | read-only | mandatory | The MAC address of the BLC Agent. |
| 1.3.6.1.4.1.43.12.1.6 | ScalarblcAgentAuthenticationStatus | read-only | mandatory | Indicates whether management frames are checked against entries in the management tranmiter table. |
| 1.3.6.1.4.1.43.12.1.7 | ScalarblcAgentResetDevice | read-write | mandatory | Network management module reset status. Writing a 2 to this object will reset the management agent. |
| 1.3.6.1.4.1.43.12.1.8 | ScalarblcAgentDefaultConfig | read-write | mandatory | The device is returned to its factory settings. |
| 1.3.6.1.4.1.43.12.1.9 | TableblcAgentManagementTable | not-accessible | mandatory | This entity's management address table. (10 entries) |
| 1.3.6.1.4.1.43.12.1.9.1 | RowblcAgentManagementEntry | not-accessible | mandatory | A source address address and privileges of a particular management station. |
| 1.3.6.1.4.1.43.12.1.9.1.1 | ColumnblcAgentManagementAddr | read-write | mandatory | IpAddress of the manager. |
| 1.3.6.1.4.1.43.12.1.9.1.2 | ColumnblcAgentManagementAccess | read-write | mandatory | Setting this object to the value invalid(2) invalidates the corresponding entry in the ECSAgentTrapReceiverTable. That is, it effectively disassociates the add… |
| 1.3.6.1.4.1.43.12.1.10 | TableblcAgentTrapReceiverTable | not-accessible | mandatory | This entity's Trap Receiver Table. (10 entries) |
| 1.3.6.1.4.1.43.12.1.10.1 | RowblcAgentTrapReceiverEntry | not-accessible | mandatory | A destination address and community string for a particular trap receiver. |
| 1.3.6.1.4.1.43.12.1.10.1.1 | ColumnblcAgentTrapReceiverAddr | read-write | mandatory | IpAddress for trap receiver. |
| 1.3.6.1.4.1.43.12.1.10.1.2 | ColumnblcAgentTrapType | write-only | mandatory | Setting this object to the value invalid(2) invalidates the corresponding entry in the blcAgentTrapReceiverTable. That is, it effectively disassociates the add… |
| 1.3.6.1.4.1.43.12.1.10.1.3 | ColumnblcAgentTrapReceiverComm | read-write | mandatory | Community string used for traps. |
| 1.3.6.1.4.1.43.12.1.10.1.4 | ColumnblcAgentTrapLevel | read-only | mandatory | Indicates the type of traps that will be sent to this address. |
| 1.3.6.1.4.1.43.12.2 | NodeblcControl | |||
| 1.3.6.1.4.1.43.12.2.1 | ScalarblcForwardingMode | read-write | mandatory | Determines the forwarding mode of the bridge. If set to filtering then the bridge is filtering and forwarding packets by destination address, if transparent th… |
| 1.3.6.1.4.1.43.12.2.2 | ScalarblcSTAPMode | read-write | mandatory | Determines whether the STAP algorithm is on or off. |
| 1.3.6.1.4.1.43.12.2.3 | ScalarblcAccessGroupCheckingMode | read-write | mandatory | Determines whether access group checking is on or off. |
| 1.3.6.1.4.1.43.12.2.4 | ScalarblcLearnMode | read-write | mandatory | Determines whether the bridge is not learning addresses (off), learning into free access group or the null access group. |
| 1.3.6.1.4.1.43.12.2.5 | ScalarblcProtocolFilterMode | read-write | mandatory | A flag to specify whether the bridge relay will soft filter frames passing through it. |
| 1.3.6.1.4.1.43.12.2.6 | ScalarblcAgingMode | read-write | mandatory | Determines whether the addresses held in the filtering database are aged (on) or not-aged (off). |
| 1.3.6.1.4.1.43.12.2.7 | ScalarblcBroadcastForward | read-write | mandatory | Determines whether the bridge will forward packets with the broadcast address. |
| 1.3.6.1.4.1.43.12.2.8 | ScalarblcDuplicateAddressCheckingMode | read-write | mandatory | Determines whether the bridge will forward packets with the same source and destination address. |
| 1.3.6.1.4.1.43.12.2.9 | ScalarblcReportAccessGroupViolationMode | read-write | mandatory | Determines whether Access Group Violations are reported or not. |
| 1.3.6.1.4.1.43.12.3 | NodeblcDataBase | |||
| 1.3.6.1.4.1.43.12.3.1 | ScalarblcSizeOfTransparentDataBase | read-only | mandatory | The maximum possible number of the Transparent database entries. |
| 1.3.6.1.4.1.43.12.3.2 | ScalarblcNumberOfStaticEntries | read-only | mandatory | The number of entries currently in the transparent database that cannot be aged out, and are not in the permanent database. |
| 1.3.6.1.4.1.43.12.3.3 | ScalarblcNumberOfDynamicEntries | read-only | mandatory | The number of entries currently in the transparent database that can be aged out, and not held in the permanent database. |
| 1.3.6.1.4.1.43.12.3.4 | ScalarblcClearTransparentDataBase | read-write | mandatory | An attribute to clear all entries in the transparent database except for those which are permanent. |
| 1.3.6.1.4.1.43.12.3.5 | ScalarblcMaxNumberOfPermanentEntries | read-only | mandatory | The maximum number of entries in the filtering database that can be permanent. |
| 1.3.6.1.4.1.43.12.3.6 | ScalarblcNumberOfPermanentEntries | read-only | mandatory | The number of permanent entries in the filtering database. |
| 1.3.6.1.4.1.43.12.3.7 | ScalarblcClearPermanentEntries | read-write | mandatory | An attribute to clear the permanent entries from the filtering database. |
| 1.3.6.1.4.1.43.12.3.8 | ScalarblcSaveLearntAddresses | read-write | mandatory | An attribute to make the leanrt addresses held in the transparent database to become permanent entries. |
| 1.3.6.1.4.1.43.12.4 | NodeblcPcolFilter | |||
| 1.3.6.1.4.1.43.12.4.1 | ScalarblcNumberOfProtocolFilters | read-only | mandatory | The maximum number of protocol filters that can be used. |
| 1.3.6.1.4.1.43.12.4.2 | ScalarblcProtocolFilterOperation | read-write | mandatory | An attribute to determine whether the resultant filter is a composite OR or AND operation of the individual protocol filters. |
| 1.3.6.1.4.1.43.12.4.3 | TableblcProtocolFilterTable | not-accessible | mandatory | A list of protocol filter entries. The maximum number of entries is given by blcNumberOfProtocolFilters. |
| 1.3.6.1.4.1.43.12.4.3.1 | RowblcProtocolFilterEntry | not-accessible | mandatory | A protocol filter entry. |
| 1.3.6.1.4.1.43.12.4.3.1.1 | ColumnblcProtocolIndex | read-only | mandatory | A unique value for each protocol filter. Its value ranges from 1 to blcNumberOfProtocolFilters. |
| 1.3.6.1.4.1.43.12.4.3.1.2 | ColumnblcProtocolValid | read-write | mandatory | The object is valid for valid protocol filter entries. The object is removed from the table by setting the value to invalid. |
| 1.3.6.1.4.1.43.12.4.3.1.3 | ColumnblcProtocolState | read-write | mandatory | The object is on if the protocol filter is being used for filtering frames. The filter is not used, but remains in the table if the value is set to off. |
| 1.3.6.1.4.1.43.12.4.3.1.4 | ColumnblcProtocolIdentifier | read-write | mandatory | A string used to identify this protocol filter. |
| 1.3.6.1.4.1.43.12.4.3.1.5 | ColumnblcProtocolOffset | read-write | mandatory | Offset within the frame of the 4-byte field on which filtering is to be performed. |
| 1.3.6.1.4.1.43.12.4.3.1.6 | ColumnblcProtocolMask | read-write | mandatory | This object is ANDed with the 4-byte field in the frame. The result is compared with blcProtocolMatch. |
| 1.3.6.1.4.1.43.12.4.3.1.7 | ColumnblcProtocolMatch | read-write | mandatory | This object is compared with the reault of the ANDing. with blcProtocolMask. |
| 1.3.6.1.4.1.43.12.4.3.1.8 | ColumnblcProtocolDecision | read-write | mandatory | Determines whether the comparison of blcProtocolMatch and the masked data field will cause the action specified in blcProtocolAction to be taken on a match, or… |
| 1.3.6.1.4.1.43.12.4.3.1.9 | ColumnblcProtocolAction | read-write | mandatory | As a result of the descision made in blcProtocolDecision the frame will be either filterd or forwarded, depending on the setting of this object. |
| 1.3.6.1.4.1.43.12.4.4 | ScalarblcProtocolFilterDefaultAction | read-write | mandatory | The action to be taken if the filters specified in the protocol filter table are not satisfied. |
| 1.3.6.1.4.1.43.12.5 | NodeaccessGroupDBase | |||
| 1.3.6.1.4.1.43.12.5.1 | ScalaraccessGroupDBMaxEntries | read-only | mandatory | The maximum number of entries in the access group table. |
| 1.3.6.1.4.1.43.12.5.2 | ScalaraccessGroupDBValidEntries | read-only | mandatory | The current number of user group entries in the access group table. |
| 1.3.6.1.4.1.43.12.5.3 | TableaccessGroupDBShortTable | not-accessible | mandatory | A list of Access Group entries. |
| 1.3.6.1.4.1.43.12.5.3.1 | RowaccessGroupMemberShortTableEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.12.5.3.1.1 | ColumnagsMemberAddress | read-write | mandatory | The MAC address of this entry. |
| 1.3.6.1.4.1.43.12.5.3.1.2 | ColumnagsMemberValid | read-write | mandatory | This object specifies whether the MAC address is a member of the access groups database (valid). To remove the MAC address from the access group database set t… |
| 1.3.6.1.4.1.43.12.5.3.1.3 | ColumnagsMembers | read-write | mandatory | This corresponds to a bit map of the access group membership for the associated address. This includes normal Closed User Groups (CUGs) the Free Access Group a… |
| 1.3.6.1.4.1.43.12.5.4 | TableaccessGroupDBFullTable | not-accessible | mandatory | A list of Access Group entries. |
| 1.3.6.1.4.1.43.12.5.4.1 | RowaccessGroupMemberFullTableEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.12.5.4.1.1 | ColumnagfMemberAddress | read-write | mandatory | The MAC address of this entry. |
| 1.3.6.1.4.1.43.12.5.4.1.2 | ColumnagfMemberValid | read-write | mandatory | This object specifies whether the MAC address can be a memember of access groups (enabled) or not. To remove the MAC address from the access groups database se… |
| 1.3.6.1.4.1.43.12.5.4.1.3 | ColumnagfMemberFreeUserGroup | read-write | mandatory | This object specifies whether the MAC address is a member of the free access group (free) or the closed access group. |
| 1.3.6.1.4.1.43.12.5.4.1.4 | ColumnagfMemberUserGroup1 | read-write | mandatory | This object specifies whether the MAC address is a memember of access user group 1 (yes) or not (no). To remove the MAC address from this access group set the … |
| 1.3.6.1.4.1.43.12.5.4.1.5 | ColumnagfMemberUserGroup2 | read-write | mandatory | This object specifies whether the MAC address is a memember of access user group 2 (yes) or not (no). To remove the MAC address from this access group set the … |
| 1.3.6.1.4.1.43.12.5.4.1.6 | ColumnagfMemberUserGroup3 | read-write | mandatory | This object specifies whether the MAC address is a memember of access user group 3 (yes) or not (no). To remove the MAC address from this access group set the … |
| 1.3.6.1.4.1.43.12.5.4.1.7 | ColumnagfMemberUserGroup4 | read-write | mandatory | This object specifies whether the MAC address is a memember of access user group 4 (yes) or not (no). To remove the MAC address from this access group set the … |
| 1.3.6.1.4.1.43.12.5.4.1.8 | ColumnagfMemberUserGroup5 | read-write | mandatory | This object specifies whether the MAC address is a memember of access user group 5 (yes) or not (no). To remove the MAC address from this access group set the … |
| 1.3.6.1.4.1.43.12.5.4.1.9 | ColumnagfMemberUserGroup6 | read-write | mandatory | This object specifies whether the MAC address is a memember of access user group 6 (yes) or not (no). To remove the MAC address from this access group set the … |
| 1.3.6.1.4.1.43.12.5.4.1.10 | ColumnagfMemberUserGroup7 | read-write | mandatory | This object specifies whether the MAC address is a memember of access user group 7 (yes) or not (no). To remove the MAC address from this access group set the … |
| 1.3.6.1.4.1.43.12.5.4.1.11 | ColumnagfMemberUserGroup8 | read-write | mandatory | This object specifies whether the MAC address is a memember of access user group 8 (yes) or not (no). To remove the MAC address from this access group set the … |
| 1.3.6.1.4.1.43.12.5.5 | ScalaraccessUserGroupCount | read-only | mandatory | The maximum number of User Access Groups supported by the system. |
| 1.3.6.1.4.1.43.12.5.6 | TableaccessUserGroupNameTable | not-accessible | mandatory | A list of names for each access group. |
| 1.3.6.1.4.1.43.12.5.6.1 | RowaccessUserGroupNameTableEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.12.5.6.1.1 | ColumnaccessUserGroupNameIndex | read-only | mandatory | A unique value for each Access Group. Its value ranges between 1 and the value of the accessGroupEntries. |
| 1.3.6.1.4.1.43.12.5.6.1.2 | ColumnaccessUserGroupNameIdentifier | read-write | mandatory | The name associated with this access group. |
| 1.3.6.1.4.1.43.12.5.7 | TableaccessGroupViolationTable | not-accessible | mandatory | The number of access group violations on a per port basis. |
| 1.3.6.1.4.1.43.12.5.7.1 | RowaccessGroupViolationTableEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.12.5.7.1.1 | ColumnagViolationPort | read-only | mandatory | The port for which cug violations have been detected. |
| 1.3.6.1.4.1.43.12.5.7.1.2 | ColumnagViolations | read-only | mandatory | The number of CUG violations that have been attempted on the port indicated by agViolationPort |
| 1.3.6.1.4.1.43.12.255 | NodeecsXENDOFMIB |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING | ||
| PhysAddress | OCTET STRING |