MIB Viewer

LBHUB-MSH-MIB

925 objects
No module-level DESCRIPTION found.
Imported Objects
RFC-1212OBJECT-TYPE
RFC-1215TRAP-TYPE
RFC1155-SMICounter enterprises Gauge IpAddress mgmt NetworkAddress TimeTicks
RFC1213-MIBDisplayString PhysAddress
OIDNameAccessStatusDescription
1.3.6.1.2.1Nodemib-2
1.3.6.1.2.1.1Nodesystem
1.3.6.1.2.1.1.1ScalarsysDescrread-onlymandatoryA textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-syste…
1.3.6.1.2.1.1.2ScalarsysObjectIDread-onlymandatoryThe vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtr…
1.3.6.1.2.1.1.3ScalarsysUpTimeread-onlymandatoryThe time (in hundredths of a second) since the network management portion of the system was last re-initialized.
1.3.6.1.2.1.1.4ScalarsysContactread-writemandatoryThe textual identification of the contact person for this managed node, together with information on how to contact this person.
1.3.6.1.2.1.1.5ScalarsysNameread-writemandatoryAn administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name.
1.3.6.1.2.1.1.6ScalarsysLocationread-writemandatoryThe physical location of this node (e.g., `telephone closet, 3rd floor').
1.3.6.1.2.1.1.7ScalarsysServicesread-onlymandatoryA value which indicates the set of services that this entity primarily offers. The value is a sum. This sum initially takes the value zero, Then, for each laye…
1.3.6.1.2.1.2Nodeinterfaces
1.3.6.1.2.1.2.1ScalarifNumberread-onlymandatoryThe number of network interfaces (regardless of their current state) present on this system.
1.3.6.1.2.1.2.2TableifTablenot-accessiblemandatoryA list of interface entries. The number of entries is given by the value of ifNumber.
1.3.6.1.2.1.2.2.1RowifEntrynot-accessiblemandatoryAn interface entry containing objects at the subnetwork layer and below for a particular interface.
1.3.6.1.2.1.2.2.1.1ColumnifIndexread-onlymandatoryA unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re…
1.3.6.1.2.1.2.2.1.2ColumnifDescrread-onlymandatoryA textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the h…
1.3.6.1.2.1.2.2.1.3ColumnifTyperead-onlymandatoryThe type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.
1.3.6.1.2.1.2.2.1.4ColumnifMturead-onlymandatoryThe size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagr…
1.3.6.1.2.1.2.2.1.5ColumnifSpeedread-onlymandatoryAn estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation ca…
1.3.6.1.2.1.2.2.1.6ColumnifPhysAddressread-onlymandatoryThe interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.…
1.3.6.1.2.1.2.2.1.7ColumnifAdminStatusread-writemandatoryThe desired state of the interface. The testing(3) state indicates that no operational packets can be passed.
1.3.6.1.2.1.2.2.1.8ColumnifOperStatusread-onlymandatoryThe current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.
1.3.6.1.2.1.2.2.1.9ColumnifLastChangeread-onlymandatoryThe value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization o…
1.3.6.1.2.1.2.2.1.10ColumnifInOctetsread-onlymandatoryThe total number of octets received on the interface, including framing characters.
1.3.6.1.2.1.2.2.1.11ColumnifInUcastPktsread-onlymandatoryThe number of subnetwork-unicast packets delivered to a higher-layer protocol.
1.3.6.1.2.1.2.2.1.12ColumnifInNUcastPktsread-onlymandatoryThe number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
1.3.6.1.2.1.2.2.1.13ColumnifInDiscardsread-onlymandatoryThe number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr…
1.3.6.1.2.1.2.2.1.14ColumnifInErrorsread-onlymandatoryThe number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
1.3.6.1.2.1.2.2.1.15ColumnifInUnknownProtosread-onlymandatoryThe number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
1.3.6.1.2.1.2.2.1.16ColumnifOutOctetsread-onlymandatoryThe total number of octets transmitted out of the interface, including framing characters.
1.3.6.1.2.1.2.2.1.17ColumnifOutUcastPktsread-onlymandatoryThe total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not se…
1.3.6.1.2.1.2.2.1.18ColumnifOutNUcastPktsread-onlymandatoryThe total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) addre…
1.3.6.1.2.1.2.2.1.19ColumnifOutDiscardsread-onlymandatoryThe number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso…
1.3.6.1.2.1.2.2.1.20ColumnifOutErrorsread-onlymandatoryThe number of outbound packets that could not be transmitted because of errors.
1.3.6.1.2.1.2.2.1.21ColumnifOutQLenread-onlymandatoryThe length of the output packet queue (in packets).
1.3.6.1.2.1.2.2.1.22ColumnifSpecificread-onlymandatoryA reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interface is realized by an ethernet, …
1.3.6.1.2.1.3Nodeat
1.3.6.1.2.1.4Nodeip
1.3.6.1.2.1.4.1ScalaripForwardingread-writemandatoryThe indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP g…
1.3.6.1.2.1.4.2ScalaripDefaultTTLread-writemandatoryThe default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the tra…
1.3.6.1.2.1.4.3ScalaripInReceivesread-onlymandatoryThe total number of input datagrams received from interfaces, including those received in error.
1.3.6.1.2.1.4.4ScalaripInHdrErrorsread-onlymandatoryThe number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live …
1.3.6.1.2.1.4.5ScalaripInAddrErrorsread-onlymandatoryThe number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. Th…
1.3.6.1.2.1.4.6ScalaripForwDatagramsread-onlymandatoryThe number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward the…
1.3.6.1.2.1.4.7ScalaripInUnknownProtosread-onlymandatoryThe number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.
1.3.6.1.2.1.4.8ScalaripInDiscardsread-onlymandatoryThe number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buff…
1.3.6.1.2.1.4.9ScalaripInDeliversread-onlymandatoryThe total number of input datagrams successfully delivered to IP user-protocols (including ICMP).
1.3.6.1.2.1.4.10ScalaripOutRequestsread-onlymandatoryThe total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not in…
1.3.6.1.2.1.4.11ScalaripOutDiscardsread-onlymandatoryThe number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for …
1.3.6.1.2.1.4.12ScalaripOutNoRoutesread-onlymandatoryThe number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted…
1.3.6.1.2.1.4.13ScalaripReasmTimeoutread-onlymandatoryThe maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity.
1.3.6.1.2.1.4.14ScalaripReasmReqdsread-onlymandatoryThe number of IP fragments received which needed to be reassembled at this entity.
1.3.6.1.2.1.4.15ScalaripReasmOKsread-onlymandatoryThe number of IP datagrams successfully re- assembled.
1.3.6.1.2.1.4.16ScalaripReasmFailsread-onlymandatoryThe number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of di…
1.3.6.1.2.1.4.17ScalaripFragOKsread-onlymandatoryThe number of IP datagrams that have been successfully fragmented at this entity.
1.3.6.1.2.1.4.18ScalaripFragFailsread-onlymandatoryThe number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment fl…
1.3.6.1.2.1.4.19ScalaripFragCreatesread-onlymandatoryThe number of IP datagram fragments that have been generated as a result of fragmentation at this entity.
1.3.6.1.2.1.4.20TableipAddrTablenot-accessiblemandatoryThe table of addressing information relevant to this entity's IP addresses.
1.3.6.1.2.1.4.20.1RowipAddrEntrynot-accessiblemandatoryThe addressing information for one of this entity's IP addresses.
1.3.6.1.2.1.4.20.1.1ColumnipAdEntAddrread-onlymandatoryThe IP address to which this entry's addressing information pertains.
1.3.6.1.2.1.4.20.1.2ColumnipAdEntIfIndexread-onlymandatoryThe index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the …
1.3.6.1.2.1.4.20.1.3ColumnipAdEntNetMaskread-onlymandatoryThe subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits …
1.3.6.1.2.1.4.20.1.4ColumnipAdEntBcastAddrread-onlymandatoryThe value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this…
1.3.6.1.2.1.4.20.1.5ColumnipAdEntReasmMaxSizeread-onlymandatoryThe size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.
1.3.6.1.2.1.4.21TableipRouteTablenot-accessiblemandatoryThis entity's IP Routing table.
1.3.6.1.2.1.4.21.1RowipRouteEntrynot-accessiblemandatoryA route to a particular destination.
1.3.6.1.2.1.4.21.1.1ColumnipRouteDestread-writemandatoryThe destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in…
1.3.6.1.2.1.4.21.1.2ColumnipRouteIfIndexread-writemandatoryThe index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu…
1.3.6.1.2.1.4.21.1.3ColumnipRouteMetric1read-writemandatoryThe primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If …
1.3.6.1.2.1.4.21.1.4ColumnipRouteMetric2read-writemandatoryAn alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If…
1.3.6.1.2.1.4.21.1.5ColumnipRouteMetric3read-writemandatoryAn alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If…
1.3.6.1.2.1.4.21.1.6ColumnipRouteMetric4read-writemandatoryAn alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If…
1.3.6.1.2.1.4.21.1.7ColumnipRouteNextHopread-writemandatoryThe IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is…
1.3.6.1.2.1.4.21.1.8ColumnipRouteTyperead-writemandatoryThe type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this objec…
1.3.6.1.2.1.4.21.1.9ColumnipRouteProtoread-onlymandatoryThe routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th…
1.3.6.1.2.1.4.21.1.10ColumnipRouteAgeread-writemandatoryThe number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except throug…
1.3.6.1.2.1.4.21.1.11ColumnipRouteMaskread-writemandatoryIndicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not s…
1.3.6.1.2.1.4.21.1.12ColumnipRouteMetric5read-writemandatoryAn alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If…
1.3.6.1.2.1.4.21.1.13ColumnipRouteInforead-onlymandatoryA reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the rou…
1.3.6.1.2.1.4.22TableipNetToMediaTablenot-accessiblemandatoryThe IP Address Translation table used for mapping from IP addresses to physical addresses.
1.3.6.1.2.1.4.22.1RowipNetToMediaEntrynot-accessiblemandatoryEach entry contains one IpAddress to `physical' address equivalence.
1.3.6.1.2.1.4.22.1.1ColumnipNetToMediaIfIndexread-writemandatoryThe interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified …
1.3.6.1.2.1.4.22.1.2ColumnipNetToMediaPhysAddressread-writemandatoryThe media-dependent `physical' address.
1.3.6.1.2.1.4.22.1.3ColumnipNetToMediaNetAddressread-writemandatoryThe IpAddress corresponding to the media- dependent `physical' address.
1.3.6.1.2.1.4.22.1.4ColumnipNetToMediaTyperead-writemandatoryThe type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it e…
1.3.6.1.2.1.4.23ScalaripRoutingDiscardsread-onlymandatoryThe number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free-u…
1.3.6.1.2.1.5Nodeicmp
1.3.6.1.2.1.5.1ScalaricmpInMsgsread-onlymandatoryThe total number of ICMP messages which the entity received. Note that this counter includes all those counted by icmpInErrors.
1.3.6.1.2.1.5.2ScalaricmpInErrorsread-onlymandatoryThe number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.).
1.3.6.1.2.1.5.3ScalaricmpInDestUnreachsread-onlymandatoryThe number of ICMP Destination Unreachable messages received.
1.3.6.1.2.1.5.4ScalaricmpInTimeExcdsread-onlymandatoryThe number of ICMP Time Exceeded messages received.
1.3.6.1.2.1.5.5ScalaricmpInParmProbsread-onlymandatoryThe number of ICMP Parameter Problem messages received.
1.3.6.1.2.1.5.6ScalaricmpInSrcQuenchsread-onlymandatoryThe number of ICMP Source Quench messages received.
1.3.6.1.2.1.5.7ScalaricmpInRedirectsread-onlymandatoryThe number of ICMP Redirect messages received.
1.3.6.1.2.1.5.8ScalaricmpInEchosread-onlymandatoryThe number of ICMP Echo (request) messages received.
1.3.6.1.2.1.5.9ScalaricmpInEchoRepsread-onlymandatoryThe number of ICMP Echo Reply messages received.
1.3.6.1.2.1.5.10ScalaricmpInTimestampsread-onlymandatoryThe number of ICMP Timestamp (request) messages received.
1.3.6.1.2.1.5.11ScalaricmpInTimestampRepsread-onlymandatoryThe number of ICMP Timestamp Reply messages received.
1.3.6.1.2.1.5.12ScalaricmpInAddrMasksread-onlymandatoryThe number of ICMP Address Mask Request messages received.
1.3.6.1.2.1.5.13ScalaricmpInAddrMaskRepsread-onlymandatoryThe number of ICMP Address Mask Reply messages received.
1.3.6.1.2.1.5.14ScalaricmpOutMsgsread-onlymandatoryThe total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors.
1.3.6.1.2.1.5.15ScalaricmpOutErrorsread-onlymandatoryThe number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include erro…
1.3.6.1.2.1.5.16ScalaricmpOutDestUnreachsread-onlymandatoryThe number of ICMP Destination Unreachable messages sent.
1.3.6.1.2.1.5.17ScalaricmpOutTimeExcdsread-onlymandatoryThe number of ICMP Time Exceeded messages sent.
1.3.6.1.2.1.5.18ScalaricmpOutParmProbsread-onlymandatoryThe number of ICMP Parameter Problem messages sent.
1.3.6.1.2.1.5.19ScalaricmpOutSrcQuenchsread-onlymandatoryThe number of ICMP Source Quench Messages Sent.
1.3.6.1.2.1.5.20ScalaricmpOutRedirectsread-onlymandatoryThe number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects.
1.3.6.1.2.1.5.21ScalaricmpOutEchosread-onlymandatoryThe number of ICMP Echo (request) messages sent.
1.3.6.1.2.1.5.22ScalaricmpOutEchoRepsread-onlymandatoryThe number of ICMP Echo Reply messages sent.
1.3.6.1.2.1.5.23ScalaricmpOutTimestampsread-onlymandatoryThe number of ICMP Timestamp (request) messages sent.
1.3.6.1.2.1.5.24ScalaricmpOutTimestampRepsread-onlymandatoryThe number of ICMP Timestamp Reply messages sent.
1.3.6.1.2.1.5.25ScalaricmpOutAddrMasksread-onlymandatoryThe number of ICMP Address Mask Request messages sent.
1.3.6.1.2.1.5.26ScalaricmpOutAddrMaskRepsread-onlymandatoryThe number of ICMP Address Mask Reply messages sent.
1.3.6.1.2.1.6Nodetcp
1.3.6.1.2.1.6.1ScalartcpRtoAlgorithmread-onlymandatoryThe algorithm used to determine the timeout value used for retransmitting unacknowledged octets.
1.3.6.1.2.1.6.2ScalartcpRtoMinread-onlymandatoryThe minimum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type d…
1.3.6.1.2.1.6.3ScalartcpRtoMaxread-onlymandatoryThe maximum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type d…
1.3.6.1.2.1.6.4ScalartcpMaxConnread-onlymandatoryThe limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should con…
1.3.6.1.2.1.6.5ScalartcpActiveOpensread-onlymandatoryThe number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state.
1.3.6.1.2.1.6.6ScalartcpPassiveOpensread-onlymandatoryThe number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state.
1.3.6.1.2.1.6.7ScalartcpAttemptFailsread-onlymandatoryThe number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of …
1.3.6.1.2.1.6.8ScalartcpEstabResetsread-onlymandatoryThe number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state.
1.3.6.1.2.1.6.9ScalartcpCurrEstabread-onlymandatoryThe number of TCP connections for which the current state is either ESTABLISHED or CLOSE- WAIT.
1.3.6.1.2.1.6.10ScalartcpInSegsread-onlymandatoryThe total number of segments received, including those received in error. This count includes segments received on currently established connections.
1.3.6.1.2.1.6.11ScalartcpOutSegsread-onlymandatoryThe total number of segments sent, including those on current connections but excluding those containing only retransmitted octets.
1.3.6.1.2.1.6.12ScalartcpRetransSegsread-onlymandatoryThe total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets.
1.3.6.1.2.1.6.13TabletcpConnTablenot-accessiblemandatoryA table containing TCP connection-specific information.
1.3.6.1.2.1.6.13.1RowtcpConnEntrynot-accessiblemandatoryInformation about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection make…
1.3.6.1.2.1.6.13.1.1ColumntcpConnStateread-writemandatoryThe state of this TCP connection. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to retu…
1.3.6.1.2.1.6.13.1.2ColumntcpConnLocalAddressread-onlymandatoryThe local IP address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IP interface assoc…
1.3.6.1.2.1.6.13.1.3ColumntcpConnLocalPortread-onlymandatoryThe local port number for this TCP connection.
1.3.6.1.2.1.6.13.1.4ColumntcpConnRemAddressread-onlymandatoryThe remote IP address for this TCP connection.
1.3.6.1.2.1.6.13.1.5ColumntcpConnRemPortread-onlymandatoryThe remote port number for this TCP connection.
1.3.6.1.2.1.6.14ScalartcpInErrsread-onlymandatoryThe total number of segments received in error (e.g., bad TCP checksums).
1.3.6.1.2.1.6.15ScalartcpOutRstsread-onlymandatoryThe number of TCP segments sent containing the RST flag.
1.3.6.1.2.1.7Nodeudp
1.3.6.1.2.1.7.1ScalarudpInDatagramsread-onlymandatoryThe total number of UDP datagrams delivered to UDP users.
1.3.6.1.2.1.7.2ScalarudpNoPortsread-onlymandatoryThe total number of received UDP datagrams for which there was no application at the destination port.
1.3.6.1.2.1.7.3ScalarudpInErrorsread-onlymandatoryThe number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port.
1.3.6.1.2.1.7.4ScalarudpOutDatagramsread-onlymandatoryThe total number of UDP datagrams sent from this entity.
1.3.6.1.2.1.7.5TableudpTablenot-accessiblemandatoryA table containing UDP listener information.
1.3.6.1.2.1.7.5.1RowudpEntrynot-accessiblemandatoryInformation about a particular current UDP listener.
1.3.6.1.2.1.7.5.1.1ColumnudpLocalAddressread-onlymandatoryThe local IP address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any IP interface associated with the node, t…
1.3.6.1.2.1.7.5.1.2ColumnudpLocalPortread-onlymandatoryThe local port number for this UDP listener.
1.3.6.1.2.1.8Nodeegp
1.3.6.1.2.1.10Nodetransmission
1.3.6.1.2.1.11Nodesnmp
1.3.6.1.2.1.11.1ScalarsnmpInPktsread-onlymandatoryThe total number of Messages delivered to the SNMP entity from the transport service.
1.3.6.1.2.1.11.2ScalarsnmpOutPktsread-onlymandatoryThe total number of SNMP Messages which were passed from the SNMP protocol entity to the transport service.
1.3.6.1.2.1.11.3ScalarsnmpInBadVersionsread-onlymandatoryThe total number of SNMP Messages which were delivered to the SNMP protocol entity and were for an unsupported SNMP version.
1.3.6.1.2.1.11.4ScalarsnmpInBadCommunityNamesread-onlymandatoryThe total number of SNMP Messages delivered to the SNMP protocol entity which used a SNMP community name not known to said entity.
1.3.6.1.2.1.11.5ScalarsnmpInBadCommunityUsesread-onlymandatoryThe total number of SNMP Messages delivered to the SNMP protocol entity which represented an SNMP operation which was not allowed by the SNMP community named i…
1.3.6.1.2.1.11.6ScalarsnmpInASNParseErrsread-onlymandatoryThe total number of ASN.1 or BER errors encountered by the SNMP protocol entity when decoding received SNMP Messages.
1.3.6.1.2.1.11.8ScalarsnmpInTooBigsread-onlymandatoryThe total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `tooBig'.
1.3.6.1.2.1.11.9ScalarsnmpInNoSuchNamesread-onlymandatoryThe total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `noSuchName'.
1.3.6.1.2.1.11.10ScalarsnmpInBadValuesread-onlymandatoryThe total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `badValue'.
1.3.6.1.2.1.11.11ScalarsnmpInReadOnlysread-onlymandatoryThe total number valid SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `readOnly'. It should be…
1.3.6.1.2.1.11.12ScalarsnmpInGenErrsread-onlymandatoryThe total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `genErr'.
1.3.6.1.2.1.11.13ScalarsnmpInTotalReqVarsread-onlymandatoryThe total number of MIB objects which have been retrieved successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and Get-Ne…
1.3.6.1.2.1.11.14ScalarsnmpInTotalSetVarsread-onlymandatoryThe total number of MIB objects which have been altered successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request PDUs.
1.3.6.1.2.1.11.15ScalarsnmpInGetRequestsread-onlymandatoryThe total number of SNMP Get-Request PDUs which have been accepted and processed by the SNMP protocol entity.
1.3.6.1.2.1.11.16ScalarsnmpInGetNextsread-onlymandatoryThe total number of SNMP Get-Next PDUs which have been accepted and processed by the SNMP protocol entity.
1.3.6.1.2.1.11.17ScalarsnmpInSetRequestsread-onlymandatoryThe total number of SNMP Set-Request PDUs which have been accepted and processed by the SNMP protocol entity.
1.3.6.1.2.1.11.18ScalarsnmpInGetResponsesread-onlymandatoryThe total number of SNMP Get-Response PDUs which have been accepted and processed by the SNMP protocol entity.
1.3.6.1.2.1.11.19ScalarsnmpInTrapsread-onlymandatoryThe total number of SNMP Trap PDUs which have been accepted and processed by the SNMP protocol entity.
1.3.6.1.2.1.11.20ScalarsnmpOutTooBigsread-onlymandatoryThe total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `tooBig.'
1.3.6.1.2.1.11.21ScalarsnmpOutNoSuchNamesread-onlymandatoryThe total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status is `noSuchName'.
1.3.6.1.2.1.11.22ScalarsnmpOutBadValuesread-onlymandatoryThe total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `badValue'.
1.3.6.1.2.1.11.24ScalarsnmpOutGenErrsread-onlymandatoryThe total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `genErr'.
1.3.6.1.2.1.11.25ScalarsnmpOutGetRequestsread-onlymandatoryThe total number of SNMP Get-Request PDUs which have been generated by the SNMP protocol entity.
1.3.6.1.2.1.11.26ScalarsnmpOutGetNextsread-onlymandatoryThe total number of SNMP Get-Next PDUs which have been generated by the SNMP protocol entity.
1.3.6.1.2.1.11.27ScalarsnmpOutSetRequestsread-onlymandatoryThe total number of SNMP Set-Request PDUs which have been generated by the SNMP protocol entity.
1.3.6.1.2.1.11.28ScalarsnmpOutGetResponsesread-onlymandatoryThe total number of SNMP Get-Response PDUs which have been generated by the SNMP protocol entity.
1.3.6.1.2.1.11.29ScalarsnmpOutTrapsread-onlymandatoryThe total number of SNMP Trap PDUs which have been generated by the SNMP protocol entity.
1.3.6.1.2.1.11.30ScalarsnmpEnableAuthenTrapsread-writemandatoryIndicates whether the SNMP agent process is permitted to generate authentication-failure traps. The value of this object overrides any configuration informatio…
1.3.6.1.2.1.16Nodermon
1.3.6.1.2.1.16.1NoderisingAlarmThe SNMP trap that is generated when an alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps.
1.3.6.1.2.1.16.1Nodestatistics
1.3.6.1.2.1.16.2NodefallingAlarmThe SNMP trap that is generated when an alarm entry crosses its falling threshold and generates an event that is configured for sending SNMP traps.
1.3.6.1.2.1.16.2Nodehistory
1.3.6.1.2.1.16.3Nodealarm
1.3.6.1.2.1.16.3.1TablealarmTablenot-accessiblemandatoryA list of alarm entries.
1.3.6.1.2.1.16.3.1.1RowalarmEntrynot-accessiblemandatoryA list of parameters that set up a periodic checking for alarm conditions.
1.3.6.1.2.1.16.3.1.1.1ColumnalarmIndexread-onlymandatoryAn index that uniquely identifies an entry in the alarm table. Each such entry defines a diagnostic sample at a particular interval for an object on the device.
1.3.6.1.2.1.16.3.1.1.2ColumnalarmIntervalread-writemandatoryThe interval in seconds over which the data is sampled and compared with the rising and falling thresholds. When setting this variable, care should be given to…
1.3.6.1.2.1.16.3.1.1.3ColumnalarmVariableread-writemandatoryThe object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Counter, Gauge, or …
1.3.6.1.2.1.16.3.1.1.4ColumnalarmSampleTyperead-writemandatoryThe method of sampling the selected variable and calculating the value to be compared against the thresholds. If the value of this object is absoluteValue(1), …
1.3.6.1.2.1.16.3.1.1.5ColumnalarmValueread-onlymandatoryThe value of the statistic during the last sampling period. The value during the current sampling period is not made available until the period is completed.
1.3.6.1.2.1.16.3.1.1.6ColumnalarmStartupAlarmread-writemandatoryThe alarm that may be sent when this entry is first set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThre…
1.3.6.1.2.1.16.3.1.1.7ColumnalarmRisingThresholdread-writemandatoryA threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval w…
1.3.6.1.2.1.16.3.1.1.8ColumnalarmFallingThresholdread-writemandatoryA threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was …
1.3.6.1.2.1.16.3.1.1.9ColumnalarmRisingEventIndexread-writemandatoryThe index of the eventEntry that is used when a rising threshold is crossed. The eventEntry identified by a particular value of this index is the same as ident…
1.3.6.1.2.1.16.3.1.1.10ColumnalarmFallingEventIndexread-writemandatoryThe index of the eventEntry that is used when a falling threshold is crossed. The eventEntry identified by a particular value of this index is the same as iden…
1.3.6.1.2.1.16.3.1.1.11ColumnalarmOwnerread-writemandatoryThe entity that configured this entry and is therefore using the resources assigned to it.
1.3.6.1.2.1.16.3.1.1.12ColumnalarmStatusread-writemandatoryThe status of this alarm entry.
1.3.6.1.2.1.16.4Nodehosts
1.3.6.1.2.1.16.5NodehostTopN
1.3.6.1.2.1.16.6Nodematrix
1.3.6.1.2.1.16.7Nodefilter
1.3.6.1.2.1.16.8Nodecapture
1.3.6.1.2.1.16.9Nodeevent
1.3.6.1.2.1.16.9.1TableeventTablenot-accessiblemandatoryA list of events to be generated.
1.3.6.1.2.1.16.9.1.1RoweventEntrynot-accessiblemandatoryA set of parameters that describe an event to be generated when certain conditions are met.
1.3.6.1.2.1.16.9.1.1.1ColumneventIndexread-onlymandatoryAn index that uniquely identifies an entry in the event table. Each such entry defines one event that is to be generated when the appropriate conditions occur.
1.3.6.1.2.1.16.9.1.1.2ColumneventDescriptionread-writemandatoryA comment describing this event entry.
1.3.6.1.2.1.16.9.1.1.3ColumneventTyperead-writemandatoryThe type of notification that the probe will make about this event. In the case of log, an entry is made in the log table for each event. In the case of snmp-t…
1.3.6.1.2.1.16.9.1.1.4ColumneventCommunityread-writemandatoryIf an SNMP trap is to be sent, it will be sent to the SNMP community specified by this octet string. In the future this table will be extended to include the p…
1.3.6.1.2.1.16.9.1.1.5ColumneventLastTimeSentread-onlymandatoryThe value of sysUpTime at the time this event entry last generated an event. If this entry has not generated any events, this value will be zero.
1.3.6.1.2.1.16.9.1.1.6ColumneventOwnerread-writemandatoryThe entity that configured this entry and is therefore using the resources assigned to it. If this object contains a string starting with 'monitor' and has ass…
1.3.6.1.2.1.16.9.1.1.7ColumneventStatusread-writemandatoryThe status of this event entry. If this object is not equal to valid(1), all associated log entries shall be deleted by the agent.
1.3.6.1.2.1.16.9.2TablelogTablenot-accessiblemandatoryA list of events that have been logged.
1.3.6.1.2.1.16.9.2.1RowlogEntrynot-accessiblemandatoryA set of data describing an event that has been logged.
1.3.6.1.2.1.16.9.2.1.1ColumnlogEventIndexread-onlymandatoryThe event entry that generated this log entry. The log identified by a particular value of this index is associated with the same eventEntry as identified by t…
1.3.6.1.2.1.16.9.2.1.2ColumnlogIndexread-onlymandatoryAn index that uniquely identifies an entry in the log table amongst those generated by the same eventEntries. These indexes are assigned beginning with 1 and i…
1.3.6.1.2.1.16.9.2.1.3ColumnlogTimeread-onlymandatoryThe value of sysUpTime when this log entry was created.
1.3.6.1.2.1.16.9.2.1.4ColumnlogDescriptionread-onlymandatoryAn implementation dependent description of the event that activated this log entry.
1.3.6.1.2.1.17Nodedot1dBridge
1.3.6.1.2.1.22NodesnmpDot3RptrMgt
1.3.6.1.2.1.22.1NoderptrBasicPackage
1.3.6.1.2.1.22.1NoderptrHealthThe rptrHealth trap conveys information related to the operational state of the repeater. This trap is sent only when the operational status of the repeater ch…
1.3.6.1.2.1.22.1.1NoderptrRptrInfo
1.3.6.1.2.1.22.1.1.1ScalarrptrGroupCapacityread-onlymandatoryThe rptrGroupCapacity is the number of groups that can be contained within the repeater. Within each managed repeater, the groups are uniquely numbered in the …
1.3.6.1.2.1.22.1.1.2ScalarrptrOperStatusread-onlymandatoryThe rptrOperStatus object indicates the operational state of the repeater. The rptrHealthText object may be consulted for more specific information about the s…
1.3.6.1.2.1.22.1.1.3ScalarrptrHealthTextread-onlymandatoryThe health text object is a text string that provides information relevant to the operational state of the repeater. Agents may use this mechanism to provide d…
1.3.6.1.2.1.22.1.1.4ScalarrptrResetread-writemandatorySetting this variable to reset(2) causes a transition to the START state of Fig 9-2 in section 9 [11]. Setting this variable to noReset(1) has no effect. The a…
1.3.6.1.2.1.22.1.1.5ScalarrptrNonDisruptTestread-writemandatorySetting this variable to selfTest(2) causes the repeater to perform a agent-specific, non- disruptive self-test that has the following characteristics: (1) The…
1.3.6.1.2.1.22.1.1.6ScalarrptrTotalPartitionedPortsread-onlymandatoryThis object returns the total number of ports in the repeater whose current state meets all three of the following criteria: rptrPortOperStatus does not have t…
1.3.6.1.2.1.22.1.2NoderptrGroupInfo
1.3.6.1.2.1.22.1.2.1TablerptrGroupTablenot-accessiblemandatoryTable of descriptive and status information about the groups of ports.
1.3.6.1.2.1.22.1.2.1.1RowrptrGroupEntrynot-accessiblemandatoryAn entry in the table, containing information about a single group of ports.
1.3.6.1.2.1.22.1.2.1.1.1ColumnrptrGroupIndexread-onlymandatoryThis variable identifies the group within the repeater for which this entry contains information. This value is never greater than rptrGroupCapacity.
1.3.6.1.2.1.22.1.2.1.1.2ColumnrptrGroupDescrread-onlymandatoryA textual description of the group. This value should include the full name and version identification of the group's hardware type and indicate how the group …
1.3.6.1.2.1.22.1.2.1.1.3ColumnrptrGroupObjectIDread-onlymandatoryThe vendor's authoritative identification of the group. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straight-forwar…
1.3.6.1.2.1.22.1.2.1.1.4ColumnrptrGroupOperStatusread-onlymandatoryAn object that indicates the operational status of the group. A status of notPresent(4) indicates that the group has been physically removed from the repeater.…
1.3.6.1.2.1.22.1.2.1.1.5ColumnrptrGroupLastOperStatusChangeread-onlymandatoryAn object that contains the value of sysUpTime at the time that the value of the rptrGroupOperStatus object for this group last changed. A value of zero indica…
1.3.6.1.2.1.22.1.2.1.1.6ColumnrptrGroupPortCapacityread-onlymandatoryThe rptrGroupPortCapacity is the number of ports that can be contained within the group. Valid range is 1-1024. Within each group, the ports are uniquely numbe…
1.3.6.1.2.1.22.1.3NoderptrPortInfo
1.3.6.1.2.1.22.1.3.1TablerptrPortTablenot-accessiblemandatoryTable of descriptive and status information about the ports.
1.3.6.1.2.1.22.1.3.1.1RowrptrPortEntrynot-accessiblemandatoryAn entry in the table, containing information about a single port.
1.3.6.1.2.1.22.1.3.1.1.1ColumnrptrPortGroupIndexread-onlymandatoryThis variable identifies the group containing the port for which this entry contains information.
1.3.6.1.2.1.22.1.3.1.1.2ColumnrptrPortIndexread-onlymandatoryThis variable identifies the port within the group within the repeater for which this entry contains management information. This value can never be greater th…
1.3.6.1.2.1.22.1.3.1.1.3ColumnrptrPortAdminStatusread-writemandatorySetting this object to disabled(2) disables the port. A disabled port neither transmits nor receives. Once disabled, a port must be explicitly enabled to resto…
1.3.6.1.2.1.22.1.3.1.1.4ColumnrptrPortAutoPartitionStateread-onlymandatoryThe autoPartitionState flag indicates whether the port is currently partitioned by the repeater's auto-partition protection. The conditions that cause port par…
1.3.6.1.2.1.22.1.3.1.1.5ColumnrptrPortOperStatusread-onlymandatoryThis object indicates the port's operational state. The notPresent(3) state indicates the port is physically removed (note this may or may not be possible depe…
1.3.6.1.2.1.22.2NoderptrGroupChangeThis trap is sent when a change occurs in the group structure of a repeater. This occurs only when a group is logically removed from or added to a repeater. Th…
1.3.6.1.2.1.22.2NoderptrMonitorPackage
1.3.6.1.2.1.22.2.1NoderptrMonitorRptrInfo
1.3.6.1.2.1.22.2.1.1ScalarrptrMonitorTransmitCollisionsread-onlymandatoryThis counter is incremented every time the repeater state machine enters the TRANSMIT COLLISION state from any state other than ONE PORT LEFT (Ref: Fig 9-2) [1…
1.3.6.1.2.1.22.2.2NoderptrMonitorGroupInfo
1.3.6.1.2.1.22.2.2.1TablerptrMonitorGroupTablenot-accessiblemandatoryTable of performance and error statistics for the groups.
1.3.6.1.2.1.22.2.2.1.1RowrptrMonitorGroupEntrynot-accessiblemandatoryAn entry in the table, containing total performance and error statistics for a single group. Regular retrieval of the information in this table provides a mean…
1.3.6.1.2.1.22.2.2.1.1.1ColumnrptrMonitorGroupIndexread-onlymandatoryThis object identifies the group within the repeater for which this entry contains information.
1.3.6.1.2.1.22.2.2.1.1.2ColumnrptrMonitorGroupTotalFramesread-onlymandatoryThe total number of frames of valid frame length that have been received on the ports in this group. This counter is the summation of the values of the rptrMon…
1.3.6.1.2.1.22.2.2.1.1.3ColumnrptrMonitorGroupTotalOctetsread-onlymandatoryThe total number of octets contained in the valid frames that have been received on the ports in this group. This counter is the summation of the values of the…
1.3.6.1.2.1.22.2.2.1.1.4ColumnrptrMonitorGroupTotalErrorsread-onlymandatoryThe total number of errors which have occurred on all of the ports in this group. This counter is the summation of the values of the rptrMonitorPortTotalErrors…
1.3.6.1.2.1.22.2.3NoderptrMonitorPortInfo
1.3.6.1.2.1.22.2.3.1TablerptrMonitorPortTablenot-accessiblemandatoryTable of performance and error statistics for the ports.
1.3.6.1.2.1.22.2.3.1.1RowrptrMonitorPortEntrynot-accessiblemandatoryAn entry in the table, containing performance and error statistics for a single port.
1.3.6.1.2.1.22.2.3.1.1.1ColumnrptrMonitorPortGroupIndexread-onlymandatoryThis object identifies the group containing the port for which this entry contains information.
1.3.6.1.2.1.22.2.3.1.1.2ColumnrptrMonitorPortIndexread-onlymandatoryThis object identifies the port within the group for which this entry contains information.
1.3.6.1.2.1.22.2.3.1.1.3ColumnrptrMonitorPortReadableFramesread-onlymandatoryThis object is the number of frames of valid frame length that have been received on this port. This counter is incremented by one for each frame received on t…
1.3.6.1.2.1.22.2.3.1.1.4ColumnrptrMonitorPortReadableOctetsread-onlymandatoryThis object is the number of octets contained in valid frames that have been received on this port. This counter is incremented by OctetCount for each frame re…
1.3.6.1.2.1.22.2.3.1.1.5ColumnrptrMonitorPortFCSErrorsread-onlymandatoryThis counter is incremented by one for each frame received on this port with the FCSError signal asserted and the FramingError and CollisionEvent signals deass…
1.3.6.1.2.1.22.2.3.1.1.6ColumnrptrMonitorPortAlignmentErrorsread-onlymandatoryThis counter is incremented by one for each frame received on this port with the FCSError and FramingError signals asserted and CollisionEvent signal deasserte…
1.3.6.1.2.1.22.2.3.1.1.7ColumnrptrMonitorPortFrameTooLongsread-onlymandatoryThis counter is incremented by one for each frame received on this port whose OctetCount is greater than maxFrameSize (Ref: 4.4.2.1, IEEE 802.3 Std). If rptrMo…
1.3.6.1.2.1.22.2.3.1.1.8ColumnrptrMonitorPortShortEventsread-onlymandatoryThis counter is incremented by one for each CarrierEvent on this port with ActivityDuration less than ShortEventMaxTime. ShortEventMaxTime is greater than 74 b…
1.3.6.1.2.1.22.2.3.1.1.9ColumnrptrMonitorPortRuntsread-onlymandatoryThis counter is incremented by one for each CarrierEvent on this port that meets one of the following two conditions. Only one test need be made. a) The Activi…
1.3.6.1.2.1.22.2.3.1.1.10ColumnrptrMonitorPortCollisionsread-onlymandatoryThis counter is incremented by one for any CarrierEvent signal on any port for which the CollisionEvent signal on this port is asserted. The approximate minimu…
1.3.6.1.2.1.22.2.3.1.1.11ColumnrptrMonitorPortLateEventsread-onlymandatoryThis counter is incremented by one for each CarrierEvent on this port in which the CollIn(X) variable transitions to the value SQE (Ref: 9.6.6.2, IEEE 802.3 St…
1.3.6.1.2.1.22.2.3.1.1.12ColumnrptrMonitorPortVeryLongEventsread-onlymandatoryThis counter is incremented by one for each CarrierEvent on this port whose ActivityDuration is greater than the MAU Jabber Lockup Protection timer TW3 (Ref: 9…
1.3.6.1.2.1.22.2.3.1.1.13ColumnrptrMonitorPortDataRateMismatchesread-onlymandatoryThis counter is incremented by one for each frame received on this port that meets all of the following conditions: a) The CollisionEvent signal is not asserte…
1.3.6.1.2.1.22.2.3.1.1.14ColumnrptrMonitorPortAutoPartitionsread-onlymandatoryThis counter is incremented by one for each time the repeater has automatically partitioned this port. The conditions that cause port partitioning are specifie…
1.3.6.1.2.1.22.2.3.1.1.15ColumnrptrMonitorPortTotalErrorsread-onlymandatoryThe total number of errors which have occurred on this port. This counter is the summation of the values of other error counters (for the same port), namely: r…
1.3.6.1.2.1.22.3NoderptrAddrTrackPackage
1.3.6.1.2.1.22.3.1NoderptrAddrTrackRptrInfo
1.3.6.1.2.1.22.3.2NoderptrAddrTrackGroupInfo
1.3.6.1.2.1.22.3.3NoderptrAddrTrackPortInfo
1.3.6.1.2.1.22.3.3.1TablerptrAddrTrackTablenot-accessiblemandatoryTable of address mapping information about the ports.
1.3.6.1.2.1.22.3.3.1.1RowrptrAddrTrackEntrynot-accessiblemandatoryAn entry in the table, containing address mapping information about a single port.
1.3.6.1.2.1.22.3.3.1.1.1ColumnrptrAddrTrackGroupIndexread-onlymandatoryThis object identifies the group containing the port for which this entry contains information.
1.3.6.1.2.1.22.3.3.1.1.2ColumnrptrAddrTrackPortIndexread-onlymandatoryThis object identifies the port within the group for which this entry contains information.
1.3.6.1.2.1.22.3.3.1.1.3ColumnrptrAddrTrackLastSourceAddressread-onlymandatoryThis object is the SourceAddress of the last readable frame (i.e., counted by rptrMonitorPortReadableFrames) received by this port.
1.3.6.1.2.1.22.3.3.1.1.4ColumnrptrAddrTrackSourceAddrChangesread-onlymandatoryThis counter is incremented by one for each time that the rptrAddrTrackLastSourceAddress attribute for this port has changed. This may indicate whether a link …
1.3.6.1.4.1.23Nodenovell
1.3.6.1.4.1.23.2NodemibDoc
1.3.6.1.4.1.23.2.5Nodeipx
1.3.6.1.4.1.23.2.5.1NodeipxSystem
1.3.6.1.4.1.23.2.5.1.1TableipxBasicSysTablenot-accessiblemandatoryThe IPX System Table - basic information.
1.3.6.1.4.1.23.2.5.1.1.1RowipxBasicSysEntrynot-accessiblemandatoryEach entry corresponds to one instance of IPX running on the system.
1.3.6.1.4.1.23.2.5.1.1.1.1ColumnipxBasicSysInstanceread-onlymandatoryThe unique identifier of the instance of IPX to which this row corresponds. This value may be written only when creating a new entry in the table.
1.3.6.1.4.1.23.2.5.1.1.1.2ColumnipxBasicSysExistStateread-writemandatoryThe validity of this entry in the IPX system table. Setting this field to off indicates that this entry may be deleted from the system table at the IPX impleme…
1.3.6.1.4.1.23.2.5.1.1.1.3ColumnipxBasicSysNetNumberread-writemandatoryThe network number portion of the IPX address of this system.
1.3.6.1.4.1.23.2.5.1.1.1.4ColumnipxBasicSysNoderead-writemandatoryThe node number portion of the IPX address of this system.
1.3.6.1.4.1.23.2.5.1.1.1.5ColumnipxBasicSysNameread-writemandatoryThe readable name for this system.
1.3.6.1.4.1.23.2.5.1.1.1.6ColumnipxBasicSysInReceivesread-onlymandatoryThe total number of IPX packets received, including those received in error.
1.3.6.1.4.1.23.2.5.1.1.1.7ColumnipxBasicSysInHdrErrorsread-onlymandatoryThe number of IPX packets discarded due to errors in their headers, including any IPX packets with a size less than the minimum of 30 bytes.
1.3.6.1.4.1.23.2.5.1.1.1.8ColumnipxBasicSysInUnknownSocketsread-onlymandatoryThe number of IPX packets discarded because the destination socket was not open.
1.3.6.1.4.1.23.2.5.1.1.1.9ColumnipxBasicSysInDiscardsread-onlymandatoryThe number of IPX packets received but discarded due to reasons other than those accounted for by ipxBasicSysInHdrErrors, ipxBasicSysInUnknownSockets, ipxAdvSy…
1.3.6.1.4.1.23.2.5.1.1.1.10ColumnipxBasicSysInBadChecksumsread-onlymandatoryThe number of IPX packets received with incorrect checksums.
1.3.6.1.4.1.23.2.5.1.1.1.11ColumnipxBasicSysInDeliversread-onlymandatoryThe total number of IPX packets delivered locally, including packets from local applications.
1.3.6.1.4.1.23.2.5.1.1.1.12ColumnipxBasicSysNoRoutesread-onlymandatoryThe number of times no route to a destination was found.
1.3.6.1.4.1.23.2.5.1.1.1.13ColumnipxBasicSysOutRequestsread-onlymandatoryThe number of IPX packets supplied locally for transmission, not including any packets counted in ipxAdvForwPackets.
1.3.6.1.4.1.23.2.5.1.1.1.14ColumnipxBasicSysOutMalformedRequestsread-onlymandatoryThe number of IPX packets supplied locally that contained errors in their structure.
1.3.6.1.4.1.23.2.5.1.1.1.15ColumnipxBasicSysOutDiscardsread-onlymandatoryThe number of outgoing IPX packets discarded due to reasons other than those accounted for in ipxBasicSysOutMalformedDiscards, ipxAdvSysOutFiltered, and ipxAdv…
1.3.6.1.4.1.23.2.5.1.1.1.16ColumnipxBasicSysOutPacketsread-onlymandatoryThe total number of IPX packets transmitted.
1.3.6.1.4.1.23.2.5.1.1.1.17ColumnipxBasicSysConfigSocketsread-onlymandatoryThe configured maximum number of IPX sockets that may be open at one time.
1.3.6.1.4.1.23.2.5.1.1.1.18ColumnipxBasicSysOpenSocketFailsread-onlymandatoryThe number of IPX socket open calls which failed.
1.3.6.1.4.1.23.2.5.1.2TableipxAdvSysTablenot-accessiblemandatoryThe IPX System Table - advanced information.
1.3.6.1.4.1.23.2.5.1.2.1RowipxAdvSysEntrynot-accessiblemandatoryEach entry corresponds to one instance of IPX running on the system.
1.3.6.1.4.1.23.2.5.1.2.1.1ColumnipxAdvSysInstanceread-writemandatoryThe unique identifer of the instance of IPX to which this row corresponds. This value may be written only when creating a new entry in the table.
1.3.6.1.4.1.23.2.5.1.2.1.2ColumnipxAdvSysMaxPathSplitsread-writemandatoryThe maximum number of paths with equal routing metric value which this instance of the IPX my split between when forwarding packets.
1.3.6.1.4.1.23.2.5.1.2.1.3ColumnipxAdvSysMaxHopsread-writemandatoryThe maximum number of hops a packet may take.
1.3.6.1.4.1.23.2.5.1.2.1.4ColumnipxAdvSysTooManyHopsread-onlymandatoryThe number of IPX packets discarded due to exceeding the maximum hop count.
1.3.6.1.4.1.23.2.5.1.2.1.5ColumnipxAdvSysInFilteredread-onlymandatoryThe number of incoming IPX packets discarded due to filtering.
1.3.6.1.4.1.23.2.5.1.2.1.6ColumnipxAdvSysCompressDiscardsread-onlymandatoryThe number of incoming IPX packets discarded due to decompression errors.
1.3.6.1.4.1.23.2.5.1.2.1.7ColumnipxAdvSysNETBIOSPacketsread-onlymandatoryThe number of NETBIOS packets received.
1.3.6.1.4.1.23.2.5.1.2.1.8ColumnipxAdvSysForwPacketsread-onlymandatoryThe number of IPX packets forwarded.
1.3.6.1.4.1.23.2.5.1.2.1.9ColumnipxAdvSysOutFilteredread-onlymandatoryThe number of outgoing IPX packets discarded due to filtering.
1.3.6.1.4.1.23.2.5.1.2.1.10ColumnipxAdvSysOutCompressDiscardsread-onlymandatoryThe number of outgoing IPX packets discarded due to compression errors.
1.3.6.1.4.1.23.2.5.1.2.1.11ColumnipxAdvSysCircCountread-onlymandatoryThe number of circuits known to this instance of IPX.
1.3.6.1.4.1.23.2.5.1.2.1.12ColumnipxAdvSysDestCountread-onlymandatoryThe number of currently reachable destinations known to this instance of IPX.
1.3.6.1.4.1.23.2.5.1.2.1.13ColumnipxAdvSysServCountread-onlymandatoryThe number of services known to this instance of IPX.
1.3.6.1.4.1.23.2.5.2NodeipxCircuit
1.3.6.1.4.1.23.2.5.3NodeipxForwarding
1.3.6.1.4.1.23.2.5.4NodeipxServices
1.3.6.1.4.1.23.2.5.5NodeipxTraps
1.3.6.1.4.1.43Nodea3Com
1.3.6.1.4.1.43.1Nodeproducts
1.3.6.1.4.1.43.1.1NodeterminalServer
1.3.6.1.4.1.43.1.2NodededicatedBridgeServer
1.3.6.1.4.1.43.1.3NodededicatedRouteServer
1.3.6.1.4.1.43.1.4Nodebrouter
1.3.6.1.4.1.43.1.5NodegenericMSWorkstation
1.3.6.1.4.1.43.1.6NodegenericMSServer
1.3.6.1.4.1.43.1.7NodegenericUnixServer
1.3.6.1.4.1.43.1.8Nodehub
1.3.6.1.4.1.43.1.8.1NodelinkBuilder3GH
1.3.6.1.4.1.43.1.8.2NodelinkBuilder10BTi
1.3.6.1.4.1.43.1.8.3NodelinkBuilderECS
1.3.6.1.4.1.43.1.8.4NodelinkBuilderMSH
1.3.6.1.4.1.43.1.8.4.1Nodemisc
1.3.6.1.4.1.43.1.8.4.1.1ScalartempSensorOutputread-onlymandatoryMounted on the Management card is a temperature sensing device. This device provides three output levels : OK, WARM and DANGER.
1.3.6.1.4.1.43.1.8.4.1.2TablestatusInputTablenot-accessiblemandatoryThis table provides information about and allows configuration of the 4 general purpose inputs provided by the MSH management card.
1.3.6.1.4.1.43.1.8.4.1.2.1RowstatusInputTableEntrynot-accessiblemandatoryThis entry describes one of the status inputs provided by the MSH management card.
1.3.6.1.4.1.43.1.8.4.1.2.1.1ColumnstatusInputIndexread-onlymandatoryIdentify one of the status inputs provided by the MSH card.
1.3.6.1.4.1.43.1.8.4.1.2.1.2ColumnstatusInputStateread-onlymandatoryEach of the MSH management general purpose input lines is actually a pair of wires. In order to use one of the lines the two wires of a particular pair must be…
1.3.6.1.4.1.43.1.8.4.1.2.1.3ColumnstatusTrapEnableread-writemandatoryBy setting the value of this object to enable, the MSH will monitor the value of statusInputState for changes. If a change from open to close or from close to …
1.3.6.1.4.1.43.1.8.4.1.2.1.4ColumnstatusNameread-writemandatoryThis is a writable string associated with one of the status inputs. By default the string will initialise to 'Status Input #x' where x is 1, 2, 3 or 4. The use…
1.3.6.1.4.1.43.1.8.4.1.3TablechassisMgmtMACTablenot-accessiblemandatoryThe chassis management card contains an 802.3 MAC and physical layer that can be used for management traffic. In some situations this interface may be inapprop…
1.3.6.1.4.1.43.1.8.4.1.3.1RowchassisMgmtMACEntrynot-accessiblemandatoryThis entry describes the abilities and the state of one of the MACs available for management use in the chassis.
1.3.6.1.4.1.43.1.8.4.1.3.1.1ColumnmacSlotNumberread-onlymandatoryIndex into the table. This is identifies the card on which the MAC that this conceptual row describes.
1.3.6.1.4.1.43.1.8.4.1.3.1.2ColumnmacIndexread-onlymandatoryIndex into the table. This object distinguishes the MAC described by this row in the conceptual table from the potentially many MACs supported by this card.
1.3.6.1.4.1.43.1.8.4.1.3.1.3ColumnmacBroadcastAvailableread-onlymandatoryThis is an informational field. It describes the capability of the MAC represented by this conceptual row to receive and transmit a 'broadcast' packet. Note th…
1.3.6.1.4.1.43.1.8.4.1.3.1.4ColumnmacLSAPFilteringread-onlymandatoryThis is an informational field. It describes the capability of the MAC represented by this conceptual row to directly filter packets based on the contents of t…
1.3.6.1.4.1.43.1.8.4.1.3.1.5ColumnmacTypeFilteringread-onlymandatoryThis is an informational field. It describes the capability of the MAC represented by this conceptual row to directly filter packets based on type field locall…
1.3.6.1.4.1.43.1.8.4.1.3.1.6ColumnmacMaxPDUsizeread-onlymandatoryThis is an informational field. It indicates the maximum number of data octets that can be transmitted or received using the shared MAC. When used for SNMP it …
1.3.6.1.4.1.43.1.8.4.1.3.1.7ColumnmacPhyAddressread-onlymandatoryThe physical MAC address of this specific MAC.
1.3.6.1.4.1.43.1.8.4.1.3.1.8ColumnmacStatusread-writemandatoryThis object is used to enable or disable a shared MAC for SNMP protocol usage. Note that if a shared MAC has insufficient capabilities to run the SNMP stack th…
1.3.6.1.4.1.43.1.8.4.1.4TablechassisLedTablenot-accessiblemandatoryThis table contains configuration information for each of the card specific LEDs on the front panel module. There is one LED for each card location.
1.3.6.1.4.1.43.1.8.4.1.4.1RowchassisLedEntrynot-accessiblemandatoryThis entry describes the abilities and the state of one of the MACs available for management use in the chassis.
1.3.6.1.4.1.43.1.8.4.1.4.1.1ColumnchassisSlotNumberread-onlymandatoryIdentifies which LED this row describes.
1.3.6.1.4.1.43.1.8.4.1.4.1.2ColumnchassisLedColourread-onlymandatoryRead the current colour of the LED. This is intended for use by FullView type applications.
1.3.6.1.4.1.43.1.8.4.1.4.1.3ColumnchassisAttentionStateread-writemandatoryWriting 'attention' to this object will cause the LED above that card to become RED. This is intended to be used to aid maintenance of a large system.
1.3.6.1.4.1.43.1.8.4.2NodemshFault
1.3.6.1.4.1.43.1.8.4.2.1ScalarmshFaultModifiedFlagread-writedeprecatedIn order to ensure a clean read of the Fault table this flag should be set to clean_read when commencing to read the table and should be examined after reading…
1.3.6.1.4.1.43.1.8.4.2.2TablemshFaultTablenot-accessibledeprecatedThe Fault Table.
1.3.6.1.4.1.43.1.8.4.2.2.1RowmshFaultEntrynot-accessibledeprecatedInformation relating to a single fault.
1.3.6.1.4.1.43.1.8.4.2.2.1.1ColumnmshFaultIndexread-onlydeprecatedThe index into the Fault table. The initial read from the table should be read as the next, from an index of 0; subsequent reads should read the next from the …
1.3.6.1.4.1.43.1.8.4.2.2.1.2ColumnmshFaultErrorNumberread-onlydeprecatedThis error number for this fault log entry.
1.3.6.1.4.1.43.1.8.4.2.2.1.3ColumnmshFaultTimeStampread-onlydeprecatedThe time since startup, in milliseconds, when the fault occurred.
1.3.6.1.4.1.43.1.8.4.2.2.1.4ColumnmshFaultRestartCountread-onlydeprecatedThe number of restarts at time of fault.
1.3.6.1.4.1.43.1.8.5NodelinkBuilderFMS
1.3.6.1.4.1.43.1.8.6NodelinkBuilderFddiWorkGroupHub
1.3.6.1.4.1.43.1.8.7NodelinkBuilderFMSII
1.3.6.1.4.1.43.1.8.8NodelinkSwitchFMS
1.3.6.1.4.1.43.1.8.9NodelinkSwitchMSH
1.3.6.1.4.1.43.1.8.10NodelinkBuilderFMSLBridge
1.3.6.1.4.1.43.1.8.11NodelinkBuilderTP8i
1.3.6.1.4.1.43.1.9Nodecards
1.3.6.1.4.1.43.1.9.1NodelinkBuilder3GH-cards
1.3.6.1.4.1.43.1.9.2NodelinkBuilder10BTi-cards
1.3.6.1.4.1.43.1.9.2.1NodelinkBuilder10BTi-cards-utp
1.3.6.1.4.1.43.1.9.2.2NodelinkBuilder10BT-cards-utp
1.3.6.1.4.1.43.1.9.3NodelinkBuilderECS-cards
1.3.6.1.4.1.43.1.9.4NodelinkBuilderMSH-cards
1.3.6.1.4.1.43.1.9.5NodelinkBuilderFMS-cards
1.3.6.1.4.1.43.1.9.5.1NodelinkBuilderFMS-cards-utp
1.3.6.1.4.1.43.1.9.5.2NodelinkBuilderFMS-cards-coax
1.3.6.1.4.1.43.1.9.5.3NodelinkBuilderFMS-cards-fiber
1.3.6.1.4.1.43.1.9.5.4NodelinkBuilderFMS-cards-12fiber
1.3.6.1.4.1.43.1.9.5.5NodelinkBuilderFMS-cards-24utp
1.3.6.1.4.1.43.1.9.6NodelinkBuilderFMSII-cards
1.3.6.1.4.1.43.1.9.6.1NodelinkBuilderFMSII-cards-12tp-rj45
1.3.6.1.4.1.43.1.9.6.2NodelinkBuilderFMSII-cards-10coax-bnc
1.3.6.1.4.1.43.1.9.6.3NodelinkBuilderFMSII-cards-6fiber-st
1.3.6.1.4.1.43.1.9.6.4NodelinkBuilderFMSII-cards-12fiber-st
1.3.6.1.4.1.43.1.9.6.5NodelinkBuilderFMSII-cards-24tp-rj45
1.3.6.1.4.1.43.1.9.6.6NodelinkBuilderFMSII-cards-24tp-telco
1.3.6.1.4.1.43.1.9.7Nodea3C512
1.3.6.1.4.1.43.1.9.8NodelinkBuilderTP8i-cards
1.3.6.1.4.1.43.1.9.8.1NodelinkBuilderTP8i-cards-8tp-rj45
1.3.6.1.4.1.43.1.10Nodechipsets
1.3.6.1.4.1.43.3Nodeamp-mib
1.3.6.1.4.1.43.4NodegenericTrap
1.3.6.1.4.1.43.5NodeviewBuilderApps
1.3.6.1.4.1.43.6NodespecificTrap
1.3.6.1.4.1.43.7NodelinkBuilder3GH-mib
1.3.6.1.4.1.43.8NodelinkBuilder10BTi-mib
1.3.6.1.4.1.43.9NodelinkBuilderECS-mib
1.3.6.1.4.1.43.10Nodegeneric
1.3.6.1.4.1.43.10.1NodegenExperimental
1.3.6.1.4.1.43.10.1.1NodetestData
1.3.6.1.4.1.43.10.1.2NodeifExtensions
1.3.6.1.4.1.43.10.2Nodesetup
1.3.6.1.4.1.43.10.2.1NodesetupGeneral
1.3.6.1.4.1.43.10.2.1.1ScalarheartbeatIntervalread-writemandatoryThe time, in seconds, between successive heartbeat events sent to the management station. An interval of 0 indicates that no heartbeat events are to be generat…
1.3.6.1.4.1.43.10.2.2NodesetupIp
1.3.6.1.4.1.43.10.2.2.1TablesetIpIfTablenot-accessiblemandatoryThis table shows the IP address and network mask to be used to initialise ipAddrTable on each network interface after the next system restart. There is one ent…
1.3.6.1.4.1.43.10.2.2.1.1RowsetIpIfEntrynot-accessiblemandatoryThe default information relating to a single IP interface.
1.3.6.1.4.1.43.10.2.2.1.1.1ColumnsetIpIfIndexread-onlymandatoryThe index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the …
1.3.6.1.4.1.43.10.2.2.1.1.2ColumnsetIpIfAddrread-writemandatoryThe IP address to be used for this interface.
1.3.6.1.4.1.43.10.2.2.1.1.3ColumnsetIpIfMaskread-writemandatoryThe IP network mask to be used for this interface.
1.3.6.1.4.1.43.10.2.2.2ScalarsetIpIfRouterread-writemandatoryThis is the IP address of the default router to be used for sending IP datagrams to remote destinations which have no suitable entry in the routing table. This…
1.3.6.1.4.1.43.10.2.3NodesetupStart
1.3.6.1.4.1.43.10.2.3.1ScalarstartPROMSwVerNoread-onlymandatoryThe PROM software version number.
1.3.6.1.4.1.43.10.2.3.2ScalarstartRestartCountread-onlymandatoryThe number of restarts the box has undergone, either power on or reset switch or watchdog expiries.
1.3.6.1.4.1.43.10.2.3.3ScalarstartLastRestartTyperead-onlymandatoryThe reason for the last system restart. This may be due to management command; watchdog timeout expiry; power interruption; the reset switch was pressed or sys…
1.3.6.1.4.1.43.10.2.3.4ScalarstartResetActionread-writemandatoryReset the device with manufacturers default configuration if the manDefaultReset value is written to this item.
1.3.6.1.4.1.43.10.2.3.5ScalarstartLastSystemErrorread-onlymandatoryThe last System Error experienced by the system. This is set equal to the last system error code recorded in non-volatile memory on startup. When the system is…
1.3.6.1.4.1.43.10.2.3.6ScalarstartRestartActionread-writemandatoryRestart the device with it's current configuration if the restart value is written to this item.
1.3.6.1.4.1.43.10.2.4ScalarsystemConfigChangeTimeread-onlymandatoryThis object contains the value of 'sysUpTime' for this agent at which the last configuration state change took place. For the purpose of this object the defini…
1.3.6.1.4.1.43.10.3NodesysLoader
1.3.6.1.4.1.43.10.3.1TableloadableDeviceTablenot-accessiblemandatoryA table which is used to control the loading of new software images to the devices controlled by the management agent. By convention the first entry in the tab…
1.3.6.1.4.1.43.10.3.1.1RowloadableDeviceEntrynot-accessiblemandatoryAn entry containing the objects for controlling the loading of a software image to a device controlled by the agent.
1.3.6.1.4.1.43.10.3.1.1.1ColumnslDeviceTyperead-onlymandatoryThe type of the device to load. Simple agents only contain one device type, which is always `system'. More complex agents, probably containing multiple process…
1.3.6.1.4.1.43.10.3.1.1.2ColumnslDeviceInstanceread-onlymandatoryThe instance of the device type specified by slDeviceType. By convention instance 1 of the system devices is the one containing the management agent, and alway…
1.3.6.1.4.1.43.10.3.1.1.3ColumnslLoadStatusread-onlymandatoryThe status of the last system load operation requested for this device. If the value of this object is in the range 1 to 19 inclusive, or 200 or more, the down…
1.3.6.1.4.1.43.10.3.1.1.4ColumnslSoftwareVersionread-onlymandatoryThe version identifier of the software running in the device.
1.3.6.1.4.1.43.10.3.1.1.5ColumnslHardwareVersionread-onlymandatoryThe version number identifying the revision level of the hardware of the device
1.3.6.1.4.1.43.10.3.1.1.6ColumnslFilenameread-writemandatoryThe name of the file which contains the software image to load, or which was the last loaded to the device.
1.3.6.1.4.1.43.10.3.1.1.7ColumnslServerIpAddressread-writedeprecatedThe IP address of the host containing the software image to load, or from which the last image loaded was read. This object has been deprecated in favour of wr…
1.3.6.1.4.1.43.10.3.1.1.8ColumnslLoadwrite-onlymandatoryWriting 2 to this object causes the agent to attempt to load a new software image to the corresponding device. The file to load and the address of the server t…
1.3.6.1.4.1.43.10.3.1.1.9ColumnslServerAddressread-writemandatoryThe address of the server containing the software image to load, or from which the last image was loaded. This is either an IP address in standard dotted notat…
1.3.6.1.4.1.43.10.3.1.1.10ColumnslServerProtocolread-onlymandatoryThis is the protocol to use when downloading the software from the server specified in slServerAddress. At present, this value is determined by the value of sl…
1.3.6.1.4.1.43.10.4Nodesecurity
1.3.6.1.4.1.43.10.5Nodegauges
1.3.6.1.4.1.43.10.5.1TablegaugeTablenot-accessiblemandatoryA table used to define Alarms.
1.3.6.1.4.1.43.10.5.1.1RowgaugeTableEntrynot-accessiblemandatoryThis table allows Alarms to be set-up on items in the MIB.
1.3.6.1.4.1.43.10.5.1.1.1ColumngaugeIndexread-onlymandatoryUnique identifier for a row in the Alarm Table. Allocated by the Alarms Subsystem. An integer in the range 1..gaugeTableSize.
1.3.6.1.4.1.43.10.5.1.1.2ColumngaugeItemIdread-writemandatoryThe object Id and qualifier of the item to be monitored by this alarm.
1.3.6.1.4.1.43.10.5.1.1.3ColumngaugeItemTyperead-writemandatoryA 'counter', by definition will always be a positive number. 'Meters' can be signed or unsigned.
1.3.6.1.4.1.43.10.5.1.1.4ColumngaugeSamplesPerAverageread-writemandatoryThe number of samples used to calculate the Alarm Value. The default number of samples is four. If a SamplesPerAverage value of one is used, no average is calc…
1.3.6.1.4.1.43.10.5.1.1.5ColumngaugeSamplePeriodread-writemandatoryNumber of seconds between samples. The total averaging period is given by (gaugeSamplesPerAverage * gaugeSamplePeiod) secs.
1.3.6.1.4.1.43.10.5.1.1.6ColumngaugeValueread-writemandatoryThe most recently computed average of the item being monitored. For a `meter' alarm, this is the simple average of the samples. For a 'counter' alarm, this is …
1.3.6.1.4.1.43.10.5.1.1.7ColumngaugePeakValueread-writemandatoryThe highest recorded Alarm Value. This will be either a signed or unsigned 32 bit value depending on the gaugeItemType
1.3.6.1.4.1.43.10.5.1.1.8ColumngaugeThresholdLevelread-writemandatoryThe threshold value of the the Alarm which causes the ThresholdState to move from the 'ready' state to the 'fired' state and also causes the the ThresholdActio…
1.3.6.1.4.1.43.10.5.1.1.9ColumngaugeRecoveryLevelread-writemandatoryThe threshold value of the the Alarm which causes the ThresholdState to move from the `fired' state to the `ready' state and also causes the the RecoveryAction…
1.3.6.1.4.1.43.10.5.1.1.10ColumngaugeThresholdActionread-writemandatoryThis object identifies the action to be taken when an Alarm crosses the Threshold Level. The default action will be to send a trigger event (sendTrap). The oth…
1.3.6.1.4.1.43.10.5.1.1.11ColumngaugeRecoveryActionread-writemandatoryThis object identifies the action to be taken when a 'fired' Alarm crosses the Recovery Level. The default action will be to send a recovery event (sendTrap). …
1.3.6.1.4.1.43.10.5.1.1.12ColumngaugeStateread-writemandatoryonTriggersEnabled - This is the normal active state of a alarm. The gaugeValue is updated on every sample and if it crosses the Threshold or Recovery Levels, t…
1.3.6.1.4.1.43.10.5.1.1.13ColumngaugeOwnerread-writemandatoryThe entity that configured this entry and is therefore using the resources assigned to it.
1.3.6.1.4.1.43.10.5.2ScalargaugeTableSizeread-onlymandatoryNumber of entries in Alarm Table. The size of the Alarm Table depends on the requirements and available resources of the device. The actual maximum will probab…
1.3.6.1.4.1.43.10.5.3ScalargaugeThresholdLevelScalerread-writemandatoryThe ThresholdLevel is set to this percentage of the peakValue when the Alarm is auto-calibrated. e.g gaugeThresholdLevelScaler = 120 gaugePeakValue = 360 After…
1.3.6.1.4.1.43.10.5.4ScalargaugeRecoveryLevelScalerread-writemandatoryThe RecoveryLevel is set to this percentage of the peakValue when the Alarm is auto-calibrated. e.g gaugeRecoveryLevelScaler = 90 gaugePeakValue = 360 After wr…
1.3.6.1.4.1.43.10.5.5ScalargaugeTableUpdatewrite-onlymandatoryPerforms the specified operation on every Alarm in the table.
1.3.6.1.4.1.43.10.5.6ScalargaugeConfigureObjIdwrite-onlymandatoryObject Id and qualifier of alarm(s) to be updated.
1.3.6.1.4.1.43.10.5.7ScalargaugeConfigureColumnwrite-onlymandatoryAlarm Table Column to be updated.
1.3.6.1.4.1.43.10.5.8ScalargaugeConfigureValuewrite-onlymandatoryValue to be written to the 'gaugeConfigureColumn' of the Alarms which match the 'gaugeConfigureObjId'. Writing to this value initiates the operation.
1.3.6.1.4.1.43.10.5.9ScalargaugeNextFreeIndexread-onlymandatoryIndicates the gaugeIndex which must be used to create the next alarm. Index is set to GAUGE_TABLE_FULL (zero) if there are no free rows in the table.
1.3.6.1.4.1.43.10.6NodeasciiAgent
1.3.6.1.4.1.43.10.6.1ScalarascTimeAttemptedLoginread-writemandatoryTime in hundredths of a second when the last Login was attempted. Note, that only the ASCII Agent can write to this parameter. A write operation from any other…
1.3.6.1.4.1.43.10.6.2ScalarascUserNameForLastAttemptedLoginread-writemandatoryAn ASCII string used when attempted login. Empty string is NOT valid. Note, that only the ASCII Agent can write to this parameter. A write operation from any o…
1.3.6.1.4.1.43.10.6.3ScalarascLoginStatusread-writemandatoryStatus of last attempted login. The value 'loginOKFromTelnet' or 'loginOKFromSerialPort' is used to show that the user was allowed access via Telnet or Serial …
1.3.6.1.4.1.43.10.6.4ScalarascLocalManagementBannerread-writemandatoryAn ASCII string describing the Banner to appear on the FIRST screen of the Local Management Terminal. The string of 490 characters defines a region in the cent…
1.3.6.1.4.1.43.10.7NodeserialIf
1.3.6.1.4.1.43.10.7.1ScalarsiSlipPortread-writemandatoryThis object identifies the serial port which SLIP can use to send/receive packets. If this object is set to 0xFFFF, then SLIP cannot send/receive packets.
1.3.6.1.4.1.43.10.7.2TableconfigV24Tablenot-accessiblemandatoryConfiguration parameters for all the V.24 ports in a system.
1.3.6.1.4.1.43.10.7.2.1RowconfigV24Entrynot-accessiblemandatoryConfiguration parameters for a V.24 port in the system.
1.3.6.1.4.1.43.10.7.2.1.1ColumnconfigV24PortIDread-onlymandatoryThis attribute uniquely identifies this V.24 port, it is the index for the V.24 table.
1.3.6.1.4.1.43.10.7.2.1.2ColumnconfigV24ConnTyperead-writemandatoryThis determines if the V.24 port is to be connected locally to a terminal or terminal emulator in which case no interface signals need to be asserted unless re…
1.3.6.1.4.1.43.10.7.2.1.3ColumnconfigV24AutoConfigread-writemandatoryThis determines if the configuration parameters for the V.24 port, speed, parity, stop bits, character size, are to be determined automatically from an initial…
1.3.6.1.4.1.43.10.7.2.1.4ColumnconfigV24Speedread-writemandatoryThis determines the receive and transmit speed of the V.24 port unless the autoconfigure attribute is enabled when the data rates are determined from the line.…
1.3.6.1.4.1.43.10.7.2.1.5ColumnconfigV24CharSizeread-writemandatoryThis determines the character size, unless the autoconfigure attribute is enabled when character size is determined automatically from the line, it may be set …
1.3.6.1.4.1.43.10.7.2.1.6ColumnconfigV24StopBitsread-writemandatoryThis determines the number of stop bits.
1.3.6.1.4.1.43.10.7.2.1.7ColumnconfigV24Parityread-writemandatoryThis determines the parity option to be used, unless the autoconfigure attribute is enabled when parity is determined automatically from the line, it may be se…
1.3.6.1.4.1.43.10.7.2.1.8ColumnconfigV24DSRControlread-writemandatoryThis attribute is only applicable to local connection types. It determines if DSR need be asserted for a local connection to be made and if the connection need…
1.3.6.1.4.1.43.10.7.2.1.9ColumnconfigV24DCDControlread-writemandatoryThis attribute is only applicable to local connection types. It determines if DCD need be asserted for a local connection to be made and if the connection shou…
1.3.6.1.4.1.43.10.7.2.1.10ColumnconfigV24FlowControlread-writemandatoryThis determines the flow control protocol to be used, either no flow control, xon-xoff, rts-cts full duplex or rts-cts. Full duplex rts/cts uses the rts and ct…
1.3.6.1.4.1.43.10.7.2.1.11ColumnconfigV24Updateread-writemandatoryThis attribute may be written to to force the operational V.24 port parameters to be updated.
1.3.6.1.4.1.43.10.8NoderepeaterMgmt
1.3.6.1.4.1.43.10.8.6NodemrmSecurityPackage
1.3.6.1.4.1.43.10.8.6.1TablemrmSecurePortTablenot-accessiblemandatoryA table which allows management of the secure Repeater Ports.
1.3.6.1.4.1.43.10.8.6.1.1RowmrmSecurePortEntrynot-accessiblemandatoryThis table allows repeater ports to be configured on a per port basis. It is index using the objects mrmSecRepIndex, mrmSecSlotIndex and mrmSecPortIndex.
1.3.6.1.4.1.43.10.8.6.1.1.1ColumnmrmSecRepIndexread-onlymandatoryThe secure port repeater index. This is the first of three indexes into the mrmSecurePortTable.
1.3.6.1.4.1.43.10.8.6.1.1.2ColumnmrmSecSlotIndexread-onlymandatoryThe secure port slot index. This is the second of three indexes into the mrmSecurePortTable.
1.3.6.1.4.1.43.10.8.6.1.1.3ColumnmrmSecPortIndexread-onlymandatoryThe secure port port index. This is the third of three indexes into the mrmSecurePortTable.
1.3.6.1.4.1.43.10.8.6.1.1.5ColumnmrmSecPortStateread-onlymandatoryAttribute to determine the current security status of a port. This attribute is used by the security trap to identify the reason for the trap. The range of val…
1.3.6.1.4.1.43.10.8.6.1.1.6ColumnmrmSecNTKStateread-writemandatoryAttribute to determine whether the Need to Know feature is enabled on the secure Repeater Line Card. The range of values that are valid for this object are 1 o…
1.3.6.1.4.1.43.10.8.6.1.1.7ColumnmrmSecBroadcastStateread-writemandatoryAttribute to determine whether broadcasts are allowed or not allowed to be transmitted. 1 other 2 Broadcasts are not allowed 3 Broadcasts are allowed It is onl…
1.3.6.1.4.1.43.10.8.6.1.1.8ColumnmrmSecMulticastStateread-writemandatoryAttribute to determine whether multicasts are allowed or not allowed to be transmitted. 1 other 2 Multicasts are not allowed 3 Multicasts are allowed It is onl…
1.3.6.1.4.1.43.10.8.6.1.1.9ColumnmrmSecLearnModeread-writemandatoryAttribute to determine the learning mode of the secure repeater line card. The range of values that are valid for this object are 1 no learning, the address is…
1.3.6.1.4.1.43.10.8.6.1.1.10ColumnmrmSecReportModeread-writemandatoryAttribute to determine the reporting mode of the secure repeater port. The range of values that are valid for this object are 1 Not in applicable learn state 2…
1.3.6.1.4.1.43.10.8.6.1.1.11ColumnmrmSecMACAddressread-writemandatoryThe MAC address in use by the secure repeater port.
1.3.6.1.4.1.43.10.8.6.1.1.12ColumnmrmSecRowStatusread-writemandatoryThis parameter must be set to under-modification before any changes are made to an existing configuration. Changes are not applied until this parameter is set …
1.3.6.1.4.1.43.10.9NodeendStation
1.3.6.1.4.1.43.10.9.1ScalaresDatabaseStateread-writemandatoryThis parameter is normally set to 'NO-CHANGE'. When any change is made to the database the value of this parameter becomes 'MODIFIED'. It will remain in this s…
1.3.6.1.4.1.43.10.9.2ScalaresDatabaseFlushwrite-onlymandatoryThis parameter clears the End Station Database
1.3.6.1.4.1.43.10.9.3TableesTablenot-accessiblemandatoryEnd Station Table
1.3.6.1.4.1.43.10.9.3.1RowesTableEntrynot-accessiblemandatoryThe end station database maintains information concerning end-station address information against device port for 802.3 repeater type devices. This table provi…
1.3.6.1.4.1.43.10.9.3.1.1ColumnesAddrTyperead-onlymandatoryThe end station database is capable of storing information for a number of different protocols. Each protocol has it's own addressing format. This parameter al…
1.3.6.1.4.1.43.10.9.3.1.2ColumnesAddressread-onlymandatoryThe address information held in this entry of the database. The length and format of the string depends on the address type. For example a MAC address will be …
1.3.6.1.4.1.43.10.9.3.1.3ColumnesSlotNumberread-onlymandatoryNumber of unit on which this address was learnt.
1.3.6.1.4.1.43.10.9.3.1.4ColumnesPortNumberread-onlymandatoryPort number of unit on which this address was learnt.
1.3.6.1.4.1.43.10.9.4TableesModTablenot-accessiblemandatoryEnd Station Table ( Modified )
1.3.6.1.4.1.43.10.9.4.1RowesModTableEntrynot-accessiblemandatoryThe end station database maintains information concerning end-station address information against device port for 802.3 repeater type devices. This table provi…
1.3.6.1.4.1.43.10.9.4.1.1ColumnesModAddrTyperead-onlymandatoryThe end station database is capable of storing information for a number of different protocols. Each protocol has it's own addressing format. This parameter al…
1.3.6.1.4.1.43.10.9.4.1.2ColumnesModAddressread-onlymandatoryThe address information held in this entry of the database. The length and format of the string depends on the address type. For example a MAC address will be …
1.3.6.1.4.1.43.10.9.4.1.3ColumnesModSlotNumberread-onlymandatoryUnit number on which this address was learnt.
1.3.6.1.4.1.43.10.9.4.1.4ColumnesModPortNumberread-onlymandatoryPort number of unit on which this address was learnt.
1.3.6.1.4.1.43.10.9.5TableesPortAccessTablenot-accessiblemandatoryEnd Station Table ( Port Access )
1.3.6.1.4.1.43.10.9.5.1RowesPortAccessEntrynot-accessiblemandatoryThe end station database maintains information concerning end-station address information against device port for 802.3 repeater type devices. This table provi…
1.3.6.1.4.1.43.10.9.5.1.2ColumnecPortCardNoread-onlymandatoryUnit part of the identifier for this port.
1.3.6.1.4.1.43.10.9.5.1.3ColumnecPortPortNoread-onlymandatoryPort number on unit of port for which end station information is required.
1.3.6.1.4.1.43.10.9.5.1.4ColumnecPortIndexread-onlymandatoryEach port may have a number of addresses against it. This index allows these various addresses to be distinguished. The only stipulation on this number is that…
1.3.6.1.4.1.43.10.9.5.1.5ColumnecPortAddrTyperead-onlymandatoryThe end station database is capable of storing information for a number of different protocols. Each protocol has it's own addressing format. This parameter id…
1.3.6.1.4.1.43.10.9.5.1.6ColumnecPortAddressread-onlymandatoryThe address information held in this entry of the database. The length and format of the string depends on the address type. For example a MAC address will be …
1.3.6.1.4.1.43.10.10NodelocalSnmp
1.3.6.1.4.1.43.10.10.1TabletrapTablenot-accessibledeprecatedThe snmp Trap database
1.3.6.1.4.1.43.10.10.1.1RowtrapEntrynot-accessibledeprecatedA single snmp Trap entry
1.3.6.1.4.1.43.10.10.1.1.1ColumntrapStatusread-writedeprecatedThe Status of the Entry valid(1) or invalid(2), writing invalid(2) will delete the entry from the table
1.3.6.1.4.1.43.10.10.1.1.2ColumntrapDestinationread-onlydeprecatedThe Destination IP Address
1.3.6.1.4.1.43.10.10.1.1.3ColumntrapCommunityread-writedeprecatedSNMP Community to be used to send traps to destination trapDestination
1.3.6.1.4.1.43.10.10.1.1.4ColumntrapSubjectread-writedeprecatedSNMP Subject Party used to generate traps to destination trapDestination
1.3.6.1.4.1.43.10.10.1.1.5ColumntrapCategoryread-writedeprecated32 Bit Mask indicating which Trap categories that the snmpTrapDestination is interested in. '00000001'h - High Priority Configuration Traps '00000002'h - Low P…
1.3.6.1.4.1.43.10.10.1.1.6ColumntrapThrottleread-writedeprecatedThe Maximum rate at which that trapDestination is willing to receive traps, specified as the minimum interval in milliseconds between traps. A value of zero in…
1.3.6.1.4.1.43.10.10.2TablesnmpTrapTablenot-accessiblemandatoryThis table can store the destination addresses of SNMP managers that wish to receive traps from this device.
1.3.6.1.4.1.43.10.10.2.1RowsnmpTrapEntrynot-accessiblemandatoryThis table can store the destination addresses of SNMP managers that wish to receive traps from this device.
1.3.6.1.4.1.43.10.10.2.1.1ColumnsnmpTrapIndexread-onlymandatoryThis is the unique identifier for this row in the snmpTrapTable. When creating a new row, a manager can read the value of the snmpTrapNextFreeIndex object and …
1.3.6.1.4.1.43.10.10.2.1.2ColumnsnmpTrapDestinationread-writemandatoryThis DisplayString is the network address of the device to which SNMP traps will be sent. This is an IP or IPX address. The following formats can be used. IP n…
1.3.6.1.4.1.43.10.10.2.1.3ColumnsnmpTrapProtocolread-onlymandatoryThis defines the transport protocol to use when sending an SNMP trap. At present, this value is determined by the format/value of snmpTrapDestionation which is…
1.3.6.1.4.1.43.10.10.2.1.4ColumnsnmpTrapCommunityread-writemandatorySNMP Community String to be used when sending Traps to this destination.
1.3.6.1.4.1.43.10.10.2.1.5ColumnsnmpTrapCategoryread-writemandatory32 Bit Mask indicating which Trap categories that the snmpTrapDestination is interested in. '00000001'h - High Priority Configuration Traps '00000002'h - Low P…
1.3.6.1.4.1.43.10.10.2.1.6ColumnsnmpTrapThrottleread-writemandatoryThe maximum rate at which that snmpTrapDestination is willing to receive traps, specified as the minimum interval in milliseconds between traps. For example, a…
1.3.6.1.4.1.43.10.10.2.1.7ColumnsnmpTrapRowStatusread-writemandatoryThe SNMPv2 RowStatus convention. Notes: Because this is such a simple table:- 1) Writing any data to a destroyed row, changes its state to active. 2) There is …
1.3.6.1.4.1.43.10.10.3ScalarsnmpTrapNextFreeIndexread-onlymandatoryIndicates the the next value of snmpTrapIndex which can be used to create a new trap destination entry. This value is zero if there are no free rows in the tab…
1.3.6.1.4.1.43.10.11Nodemanager
1.3.6.1.4.1.43.10.12NodeunusedGeneric12
1.3.6.1.4.1.43.10.14Nodechassis
1.3.6.1.4.1.43.10.14.1Nodeenclosure
1.3.6.1.4.1.43.10.14.1.1ScalarenclosureNameread-onlymandatoryA text string describing the chassis that this MIB describes.
1.3.6.1.4.1.43.10.14.1.2ScalarenclosureObjIdread-onlymandatoryAn OBJECT IDENTIFIER specific to this type of this chassis.
1.3.6.1.4.1.43.10.14.1.3ScalarenclosureHardwareVersread-onlymandatoryThe hardware version number of the chassis. This is a string which includes the major and minor revision levels of the hardware.
1.3.6.1.4.1.43.10.14.2NodephysicalConfig
1.3.6.1.4.1.43.10.14.2.1TablephyConfigTablenot-accessiblemandatoryThis table specifies the current physical configuration of the chassis. This table defines a chassis to contain a number of physical entities. Each such entity…
1.3.6.1.4.1.43.10.14.2.1.1RowphyConfigEntrynot-accessiblemandatoryThis is one entry in the Physical Configuration Table. It is indexed by physical location.
1.3.6.1.4.1.43.10.14.2.1.1.1ColumnphyLocationTyperead-onlymandatoryA chassis contains a number of physical entities such as power supplies and cards. Each physical entity resides at some location. A chassis can contain a numbe…
1.3.6.1.4.1.43.10.14.2.1.1.2ColumnphyLocationread-onlymandatoryA chassis contains a number of physical entities such as power supplies and cards. Each physical entity resides at some location. Some locations are known and …
1.3.6.1.4.1.43.10.14.2.1.1.3ColumnphySysObjIdread-onlymandatoryThis object is the OBJECT ID of the entity at this location.
1.3.6.1.4.1.43.10.14.2.1.1.4ColumnphyServiceTyperead-onlymandatoryThis object identifies what kind of entity is present at this location. The value represents a category of entity, for example '802.3 Repeater' or 'power suppl…
1.3.6.1.4.1.43.10.14.2.1.1.5ColumnphyEntityTyperead-onlymandatoryThis object is read in conjunction with service type to uniquely identify the specific physical entity. For example the service type may indicate '802.3 Repeat…
1.3.6.1.4.1.43.10.14.2.1.1.6ColumnphyHwVersionread-onlymandatoryThis string identifies the major and minor revision level of the entity at this location.
1.3.6.1.4.1.43.10.14.2.1.1.7ColumnphySwVersionread-onlymandatoryIf the entity at this location contains a processor there will be some programme code present. This parameter specifies the version number of that code. The ve…
1.3.6.1.4.1.43.10.14.2.1.1.8ColumnphyServiceIdread-onlymandatoryEvery chassis is considered as a collection of services. Each service is implemented using the resources of one or more physical entities within the rack. For …
1.3.6.1.4.1.43.10.14.2.1.1.9ColumnphyEntityNameread-onlymandatoryThis item is a text string describing the entity at this location.
1.3.6.1.4.1.43.10.14.2.1.1.10ColumnphyPowerReqread-onlymandatoryThis item takes the +5V and +12V current requirements of the entity and uses the values to obtain a power consumption requirement for the entity. A power suppl…
1.3.6.1.4.1.43.10.14.2.1.1.11ColumnphyNumberOfPortsread-onlymandatoryThis object contains the number of physical, external ports this entity is known to have. Note this value only applies to entities that communicate with the ma…
1.3.6.1.4.1.43.10.14.2.1.1.12ColumnphyLampTestwrite-onlymandatoryThis object allows a visual test to be performed on entities contained in the rack. The state will be recorded against the card even if that entity does not ac…
1.3.6.1.4.1.43.10.14.2.1.1.13ColumnphyEntityStateread-onlymandatoryEach entity in the chassis has a basic state independent of what function that entity performs within the chassis. If the agent cannot determine the state of a…
1.3.6.1.4.1.43.10.14.2.1.1.14ColumnphyActionwrite-onlymandatoryThis parameter allows a number of actions to be defined for cards in a chassis. Currently only one action is defined: reset. Invoking this operation will reset…
1.3.6.1.4.1.43.10.14.2.2TablephyLimitsnot-accessiblemandatoryThe physical config table describes the chassis as a number of physical entities, each of which has some physical location. This table defines the number of ph…
1.3.6.1.4.1.43.10.14.2.2.1RowphyLimitEntrynot-accessiblemandatoryThis entry provides information on the number of physical locations present in this chassis for the specified type of location. Practically this is interpreted…
1.3.6.1.4.1.43.10.14.2.2.1.1ColumnphyLimLocationTyperead-onlymandatoryA chassis contains a number of physical entities such as power supplies and cards. Each physical entity resides at some location. A chassis can contain a numbe…
1.3.6.1.4.1.43.10.14.2.2.1.2ColumnphyLimLimitread-onlymandatoryA chassis contains a number of physical entities such as power supplies and cards. Each physical entity resides at some location. A chassis can contain a numbe…
1.3.6.1.4.1.43.10.14.2.3ScalarfrontPanelDisplayMessageread-writemandatoryThis is a string which may be user-defined for display on the lower line of the front panel display.
1.3.6.1.4.1.43.10.14.3NodelogicalConfig
1.3.6.1.4.1.43.10.14.3.1TableserviceTablenot-accessiblemandatoryAn MSH chassis is logically comprised of a number of services, e.g. a repeater, bridge etc. Each service is implemented by one or more physical entities. This …
1.3.6.1.4.1.43.10.14.3.1.1RowserviceEntrynot-accessiblemandatoryThis is an entry in the Service Table which is indexed by the Service Index for that service.
1.3.6.1.4.1.43.10.14.3.1.1.1ColumnserviceIdread-onlymandatoryThis is a number representing the service in the rack. This id can be used to reference the service elsewhere in the MIB. There are several conventions used to…
1.3.6.1.4.1.43.10.14.3.1.1.2ColumnserviceNameread-onlymandatoryThis is a text string describing the service at a particular Service Index.
1.3.6.1.4.1.43.10.14.3.1.1.3ColumnserviceResetwrite-onlymandatoryThis action will reset all the cards that belong to this service.
1.3.6.1.4.1.43.10.14.3.2TableaddressTablenot-accessiblemandatoryAn MSH chassis contains a number of services. Each service is implemented by one or more cards. A number of services are 'intelligent' in that they communicate…
1.3.6.1.4.1.43.10.14.3.2.1RowaddressTableEntrynot-accessiblemandatorytext
1.3.6.1.4.1.43.10.14.3.2.1.1ColumnmgmtServiceIdread-onlymandatoryIdentifies the service for which this row provides address information.
1.3.6.1.4.1.43.10.14.3.2.1.2ColumnmgmtSubIndexread-onlymandatoryUsed to distinguish between multiple addresses for a service in the chassis.
1.3.6.1.4.1.43.10.14.3.2.1.3ColumnmgmtAddressTyperead-onlymandatoryA card in the chassis can have several addresses, either because of multiple stacks and/or for each relevant level in the stack(s). Each relevant address is re…
1.3.6.1.4.1.43.10.14.3.2.1.4ColumnmgmtAddressread-onlymandatoryThe address as block of bytes. An IP address would occupy 4 bytes and a MAC address 6 bytes.
1.3.6.1.4.1.43.10.14.3.3TablefacilityTablenot-accessiblemandatoryThe MSH chassis can simultaneously maintain a number of different sub-networks. Examples of these are the independent repeaters and a number of Token Rings. Th…
1.3.6.1.4.1.43.10.14.3.3.1RowfacilityEntrynot-accessiblemandatoryThis is an entry in the Facility Table for a particular slot. There may be more than one entry per slot, each entry being distinguished by FacilityIndex.
1.3.6.1.4.1.43.10.14.3.3.1.1ColumnfcSlotNumberread-onlymandatoryAllows access to the table for a particular card. One can use this in conjunction with get-next to read all the facility associations for a particular card.
1.3.6.1.4.1.43.10.14.3.3.1.2ColumnfcFacilityIndexread-onlymandatoryEach card may have multiple entries in the Facility Table. This object provides the means of uniquely identifying each of these entries. Note: It is a conventi…
1.3.6.1.4.1.43.10.14.3.3.1.3ColumnfcTyperead-onlymandatoryEach entry in the facility table represents an association between a physical module and one of the facilities provided by the particular configuration of this…
1.3.6.1.4.1.43.10.14.3.3.1.4ColumnfcConnectionread-writemandatoryThis object identifies the current assignment of this attachment point in this card. The legal values of this object depends on the type card. Writing an illeg…
1.3.6.1.4.1.43.10.15NodemrmResilience
1.3.6.1.4.1.43.10.15.1TableresTablenot-accessiblemandatory
1.3.6.1.4.1.43.10.15.1.1RowresTableEntrynot-accessiblemandatoryAn MSH may be configured to contain a number of 'resilient pairs'. These are 802.3 point to point connections, e.g. UTP, that allow two repeaters to be connect…
1.3.6.1.4.1.43.10.15.1.1.1ColumnresRepeaterread-onlymandatoryA resilient pair must be attached to one of the repeaters in the chassis. This is part of the index value required to access this table.
1.3.6.1.4.1.43.10.15.1.1.2ColumnresMainSlotread-onlymandatoryThis is the second key in the index to this table. This is the slot number of the main port in this pair.
1.3.6.1.4.1.43.10.15.1.1.3ColumnresMainPortread-onlymandatoryThis is the final, key used to index entries in this table. It is the port number of the main port in the pair.
1.3.6.1.4.1.43.10.15.1.1.4ColumnresMainStateread-onlymandatoryEach port in a pair is constantly monitored for signs of failure. Failure information is used to automatically change the active port from main to standby or v…
1.3.6.1.4.1.43.10.15.1.1.5ColumnresStandbySlotread-writemandatoryThis is the slot number of the standby port for this pair. The port must be present on the same repeater as the main port and so this information is not duplic…
1.3.6.1.4.1.43.10.15.1.1.6ColumnresStandbyPortread-writemandatoryThis is the port number of the standby port.
1.3.6.1.4.1.43.10.15.1.1.7ColumnresStandbyStateread-onlymandatoryEach port in a pair is constantly monitored for signs of failure. Failure information is used to automatically change the active port from main to standby or v…
1.3.6.1.4.1.43.10.15.1.1.8ColumnresPairStateread-onlymandatoryEach row in the table is in one of two states, 'invalid' or 'operational'. If the state is 'invalid', the resilient pair represented by this row is not active.…
1.3.6.1.4.1.43.10.15.1.1.9ColumnresPairModificationStatusread-writemandatoryThis parameter must be set to under-modification before any changes are made to an existing configuration. Changes are not applied until this parameter is set …
1.3.6.1.4.1.43.10.15.1.1.10ColumnresPairActionwrite-onlymandatoryThis is object allows the state of a resilient pair to be modified. The create operation configures the resilient port from this table entry. The delete operat…
1.3.6.1.4.1.43.10.15.1.1.11ColumnresPairEnableread-writemandatoryThis parameter controls whether the resilient pair is enabled or not. In the disabled state , both ports of the resilient pair are disabled. The default value …
1.3.6.1.4.1.43.10.15.2TableresStandbyMapTablenot-accessiblemandatory
1.3.6.1.4.1.43.10.15.2.1RowresStandbyMapTableEntrynot-accessiblemandatoryThis table is read-only. If provides shortcut information to allow for the translation of a port number to a corresponding main port number. This value can the…
1.3.6.1.4.1.43.10.15.2.1.1ColumnresSbRepeaterread-onlymandatoryThe repeater index of the port being accessed. This is the first of three indices on this table.
1.3.6.1.4.1.43.10.15.2.1.2ColumnresSbSlotread-onlymandatorySecond index on this table.
1.3.6.1.4.1.43.10.15.2.1.3ColumnresSbPortread-onlymandatoryThird index on this table.
1.3.6.1.4.1.43.10.15.2.1.4ColumnresSbTyperead-onlymandatoryThis attribute specifies whether the port indexed is a main or standby port in the resilient pair table. If the port is neither then there will not be a row in…
1.3.6.1.4.1.43.10.15.2.1.5ColumnresSbMainSlotread-onlymandatoryThis is the slot number of the main port for the pair in which the indexed port participates. NOTE if the index port is the main port of a pair (resSbType is '…
1.3.6.1.4.1.43.10.15.2.1.6ColumnresSbMainPortread-onlymandatoryThis is the port number of the main port for the pair in which the indexed port participates. NOTE if the index port is the main port of a pair (resSbType is '…
1.3.6.1.4.1.43.10.15.3ScalarresFlushTablewrite-onlymandatoryThis parameter causes all entries in the resilience table to be flushed. Flushing the resilience table does not affect the state of any of the resilient links …
1.3.6.1.4.1.43.10.16NodetokenRing
1.3.6.1.4.1.43.10.16.1Nodea3ComRingParams
1.3.6.1.4.1.43.10.16.1.1Tablea3ComRingConfignot-accessiblemandatoryThis table contains information about the ring configuration, such as ring speed and wrap state.
1.3.6.1.4.1.43.10.16.1.1.1Rowa3ComRingConfigEntrynot-accessiblemandatoryThis row contains information about a specific ring
1.3.6.1.4.1.43.10.16.1.1.1.1Columna3ComRingConfigServiceIdread-onlymandatoryThis parameter is used to select information about the ring from one of a number of logical devices within the same chassis. For devices that only contain a si…
1.3.6.1.4.1.43.10.16.1.1.1.2Columna3ComRingNumberread-onlymandatoryEach ring has a ring number. This is only relevant in the case of a bridged network. When there are multiple bridged token ring segments the ring number is use…
1.3.6.1.4.1.43.10.16.1.1.1.3Columna3ComRingSpeedread-onlymandatoryToken ring standards currently exist for 4 Mbps and 16 Mbps operation. This parameter reports the actual speed of the ring to the parent. If a device cannot de…
1.3.6.1.4.1.43.10.16.1.1.1.4Columna3ComRingStateread-onlymandatoryThis object reflects the operational mode of the main ring. The ring is either in 'normal' or some error state. In this list the highest numbered error 'wins'.…
1.3.6.1.4.1.43.10.16.1.1.1.5Columna3ComRingBackupStateread-onlymandatoryThis object reflects the operational mode of the backup ring. The ring is either in 'normal' or some error state. In this list the highest numbered error 'wins…
1.3.6.1.4.1.43.10.16.1.1.1.6Columna3ComRingWrapStateread-onlymandatoryThis object indicates whether or not the main and backup rings are wrapped together. If the ring is wrapped it does not necessarily mean that it is wrapped at …
1.3.6.1.4.1.43.10.16.1.1.1.7Columna3ComRingMapChangedread-writemandatoryIf the ring topology changes, because end stations join or leave the ring, a trap is generated and this variable is set to `true'. If the topology changes agai…
1.3.6.1.4.1.43.10.16.1.1.1.8Columna3ComRingMapChangeTimeread-onlymandatoryThis is the value of sysUpTime when the ring topology changed last, irrespective of whether or not a trap was generated.
1.3.6.1.4.1.43.10.16.1.1.1.9Columna3ComRingActionread-writemandatorySetting this object to clearRingCounters(2) causes all the counters in this table to be reset to zero. Alternatively, clearAllcounters(3) causes all the ring s…
1.3.6.1.4.1.43.10.16.1.2Tablea3ComRingStdStatsnot-accessiblemandatoryThis table contains an entry per ring device within the physical device supporting this MIB. Two entries may refer to the same physical ring if two logical dev…
1.3.6.1.4.1.43.10.16.1.2.1Rowa3ComRingStdStatsEntrynot-accessiblemandatoryThis row contains statistics about a ring
1.3.6.1.4.1.43.10.16.1.2.1.1Columna3ComRingStdStatsServiceIdread-onlymandatoryThis parameter is used to select information about the ring from one of a number of logical devices within the same chassis. For devices that only contain a si…
1.3.6.1.4.1.43.10.16.1.2.1.2Columna3ComRingBeaconCountread-onlymandatoryThis object counts the number of ring state transitions from normal operation to beacon mode. The higher the rate of transitions the worse the reliability of t…
1.3.6.1.4.1.43.10.16.1.2.1.3Columna3ComRingSoftErrorsread-onlymandatoryThis is the total number of isolating soft errors reported by stations on the ring. If the rate of soft errors becomes high this is a good indicator of a fault…
1.3.6.1.4.1.43.10.16.1.2.1.4Columna3ComRingActiveMonitorChangesread-onlymandatoryEvery operational ring has exactly one active monitor. Due to errors it is possible that one of the standby monitors may fail to hear from the active monitor a…
1.3.6.1.4.1.43.10.16.1.4Tablea3ComRingTopnot-accessiblemandatoryThis table contains an ordered list of addresses currently present on the token ring. The table should start from some known MAC on the managed device.
1.3.6.1.4.1.43.10.16.1.4.1Rowa3ComRingTopEntrynot-accessiblemandatoryThis row contains information about a specific station currently present on the token ring.
1.3.6.1.4.1.43.10.16.1.4.1.1Columna3ComRingTopServiceIdread-onlymandatoryThis parameter is used to select topology information from one of a number of logical devices within the same chassis. For devices that only contain a single d…
1.3.6.1.4.1.43.10.16.1.4.1.2Columna3ComRingTopIndexread-onlymandatoryAll token ring managed devices must learn the ring topology. Each logical token device has a concept of the ring topology from it's position within the ring. F…
1.3.6.1.4.1.43.10.16.1.4.1.3Columna3ComRingTopStationAddressread-onlymandatoryThis is the physical (MAC) address for the station at this position in the ring.
1.3.6.1.4.1.43.10.16.1.4.1.4Columna3ComRingTopMonitorread-onlymandatoryEach token ring segment contains an active monitor. Any station can become the active monitor, this is determined by a special active monitor protocol. The act…
1.3.6.1.4.1.43.10.16.2Nodea3ComRingStationParams
1.3.6.1.4.1.43.10.16.2.1Tablea3ComRingStatConfignot-accessiblemandatoryThis table contains information about the configuration of stations on the ring. Stations are identified by their MAC address and the ring service identifier. …
1.3.6.1.4.1.43.10.16.2.1.1Rowa3ComRingStatConfigEntrynot-accessiblemandatoryThis entry contains information about a specific ring station.
1.3.6.1.4.1.43.10.16.2.1.1.1Columna3ComRingStatConfigServiceIdread-onlymandatoryThis parameter is used to select topology information from one of a number of logical devices within the same chassis. For devices that only contain a single d…
1.3.6.1.4.1.43.10.16.2.1.1.2Columna3ComRingStatConfigAddressread-onlymandatoryThis is the physical (MAC) address of this station. Information in this table is keyed on the address.
1.3.6.1.4.1.43.10.16.2.1.1.3Columna3ComRingStatStateread-onlymandatoryThis table includes information about stations that have at some time been present on the ring. A new entry is created in this table when a new station appears…
1.3.6.1.4.1.43.10.16.2.1.1.4Columna3ComRingStatLocationread-onlymandatoryThis is the token ring physical location parameter for the station.
1.3.6.1.4.1.43.10.16.2.1.1.5Columna3ComRingStatActionread-writemandatoryThis object allows actions to be performed either on the station or the entry in this table representing that station. Not every managed device will be capable…
1.3.6.1.4.1.43.10.16.2.2Tablea3ComRingStatStandardStatsnot-accessiblemandatoryThis table contains station statistics. Stations are identified by their MAC address and the ring service identifier. NOTE: This table includes information abo…
1.3.6.1.4.1.43.10.16.2.2.1Rowa3ComRingStatStdStatsEntrynot-accessiblemandatoryThis entry contains information about a specific ring station.
1.3.6.1.4.1.43.10.16.2.2.1.1Columna3ComRingStatStdStatsServiceIdread-onlymandatoryThis parameter is used to select topology information from one of a number of logical devices within the same chassis. For devices that only contain a single d…
1.3.6.1.4.1.43.10.16.2.2.1.2Columna3ComRingStatStdStatsAddressread-onlymandatoryThis is the physical (MAC) address of this station. Information in this table is keyed on the address.
1.3.6.1.4.1.43.10.16.2.2.1.3Columna3ComRingStatLineErrorsread-onlymandatoryThis object is the sum of Line Errors reported by the station. This is an Isolating error. This counter is incremented by a station when a frame or token is re…
1.3.6.1.4.1.43.10.16.2.2.1.4Columna3ComRingStatInternalErrorsread-onlymandatoryThis object is incremented when a station detects a recoverable internal error. This can be used to detect a ring station that may be error prone. GENERAL: Sof…
1.3.6.1.4.1.43.10.16.2.2.1.5Columna3ComRingStatBurstErrorsread-onlymandatoryThe token ring receiver portion of the station expects to see continuous signal transitions on the input. This counter is incremented if the station fails to s…
1.3.6.1.4.1.43.10.16.2.2.1.6Columna3ComRingStatMonitorErrorsread-onlymandatoryA token ring always includes an active monitor station. Periodically this station initiates an active monitor poll by sending an Active Monitor Present MAC fra…
1.3.6.1.4.1.43.10.16.2.2.1.7Columna3ComRingStatLostFramesread-onlymandatoryIn the token ring architecture a station that transmits a frame will eventually receive that frame after it has gone all the way around the ring. The station t…
1.3.6.1.4.1.43.10.16.2.2.1.8Columna3ComRingStatFrameCopyErrorsread-onlymandatoryEvery frame on a token ring contains an Address Recognised bit and a Frame Copied bit. These are collectively known as the AC bits. When a station processes a …
1.3.6.1.4.1.43.10.16.2.2.1.9Columna3ComRingStatRxCongestionread-onlymandatoryA station increases this counter when it detects a packet addressed to itself but cannot copy that frame due to lack of resource. GENERAL: Soft Errors The toke…
1.3.6.1.4.1.43.10.16.2.2.1.10Columna3ComRingStatTokenErrorsread-onlymandatoryThis counter is incremented whenever a station recognises an error condition resulting in the need to generate a token. This counter will only be incremented b…
1.3.6.1.4.1.43.10.16.2.2.1.11Columna3ComRingStatFreqErrorsread-onlymandatoryThis counter is incremented whenever a station detects an error in the frequency of the received signal. GENERAL: Soft Errors The token ring architecture inclu…
1.3.6.1.4.1.43.10.16.2.2.1.12Columna3ComRingStatSoftErrorsread-onlymandatoryThis counter is the total of the isolating soft error counters in the station. The total does NOT include non- isolating errors because these do not localise a…
1.3.6.1.4.1.43.10.17NodemultiRepeater
1.3.6.1.4.1.43.10.17.1NodemrmBasicPackage
1.3.6.1.4.1.43.10.17.1.1NodemrmBasCardPackage
1.3.6.1.4.1.43.10.17.1.1.1TablemrmCardTablenot-accessiblemandatoryTable of descriptive and status information about the groups of ports.
1.3.6.1.4.1.43.10.17.1.1.1.1RowmrmCardEntrynot-accessiblemandatoryAn entry in the table, containing information about a single group of ports.
1.3.6.1.4.1.43.10.17.1.1.1.1.1ColumnmrmCardServiceIdread-onlymandatoryThis identifies one of the repeaters within the chassis as the target of a request.
1.3.6.1.4.1.43.10.17.1.1.1.1.2ColumnmrmCardIndexread-onlymandatoryThis object identifies the card within the repeater for which this entry contains information.
1.3.6.1.4.1.43.10.17.1.1.1.1.3ColumnmrmCardPortCapacityread-onlymandatoryThe mrmCardPortCapacity is the number of ports that can be contained within the group. Valid range is 1-1024. Within each group, the ports are uniquely numbere…
1.3.6.1.4.1.43.10.17.1.1.1.1.4ColumnmrmCardTestread-writemandatoryAn object that allows the user to test the operation of a card. Writing test(2) to this object forces the card to perform a disruptive test to determine if the…
1.3.6.1.4.1.43.10.17.1.1.1.1.5ColumnmrmCardDOBPortsread-onlymandatoryMSH Repeater Cards have the ability to disable ports at power up or reset. Ports configured in this way are useful for configuring resilient links because they…
1.3.6.1.4.1.43.10.17.1.1.1.1.6ColumnmrmCardMDIenableread-onlymandatory10Base-T line cards are normally configured (mdi_disabled(2)) to link to an external network device ( internal crossover ). Port 1 may be configured ( mdi_enab…
1.3.6.1.4.1.43.10.17.1.2NodemrmBasPortPackage
1.3.6.1.4.1.43.10.17.1.2.1TablemrmPortTablenot-accessiblemandatoryTable of descriptive and status information about the ports.
1.3.6.1.4.1.43.10.17.1.2.1.1RowmrmPortEntrynot-accessiblemandatoryAn entry in the table, containing information about a single port.
1.3.6.1.4.1.43.10.17.1.2.1.1.1ColumnmrmPortServiceIdread-onlymandatoryThis object identifies the repeater which this entry contains information.
1.3.6.1.4.1.43.10.17.1.2.1.1.2ColumnmrmPortCardIndexread-onlymandatoryThis object identifies the group containing the port for which this entry contains information.
1.3.6.1.4.1.43.10.17.1.2.1.1.3ColumnmrmPortIndexread-onlymandatoryThis object identifies the port within the group for which this entry contains information. This value can never be greater than mrmCardPortCapacity for the as…
1.3.6.1.4.1.43.10.17.1.2.1.1.4ColumnmrmPortInterfaceTyperead-onlymandatoryThis object specifies the type of electrical interface made available at the interface to the card for this port. The interface does not necessarily specify wh…
1.3.6.1.4.1.43.10.17.1.2.1.1.5ColumnmrmPortConnectorTyperead-onlymandatoryThis specifies the type of the physical connector through which one would attach to this card. This is distinct from the media type. For example UTP may be con…
1.3.6.1.4.1.43.10.17.1.2.1.1.6ColumnmrmPortAdminStatusread-writemandatorySetting this object to disabled(2) disables the port. A disabled port neither transmits nor receives. Once disabled, a port must be explicitly enabled to resto…
1.3.6.1.4.1.43.10.17.1.2.1.1.7ColumnmrmPortAutoPartitionStateread-onlymandatoryThe autoPartitionState flag indicates whether the port is currently partitioned by the repeater's auto-partition protection. The conditions that cause port par…
1.3.6.1.4.1.43.10.17.1.2.1.1.8ColumnmrmPortLinkStateread-onlymandatoryThis object reflects the presence or absence of signal on this port. The signal may be either light in the case of fiber, or general link present in the case o…
1.3.6.1.4.1.43.10.17.1.2.1.1.9ColumnmrmPortBootStateread-onlymandatoryA repeater port may be enabled or disabled after a reset. This parameter indicates the default for this port.
1.3.6.1.4.1.43.10.17.1.2.1.1.10ColumnmrmPortESTFilterread-writemandatoryThis attribute determines whether and which address information is extracted from packets received on a port and forwarded to the end station database. It is r…
1.3.6.1.4.1.43.10.17.1.2.1.1.11ColumnmrmPortPartitionEventread-writemandatorySpecifies whether a trap should be sent if the port partition state changes.
1.3.6.1.4.1.43.10.17.1.2.1.1.12ColumnmrmPortLinkStateEventread-writemandatorySpecifies whether a trap should be sent if the link state changes.
1.3.6.1.4.1.43.10.17.1.2.1.1.13ColumnmrmPortSecurityAvailableread-onlymandatorySpecifies whether security is an available feature on this port. Only ports that have this feature available can have an entry in the repeater security table.
1.3.6.1.4.1.43.10.17.1.2.1.1.14ColumnmrmPortLinkPulseread-writemandatoryThis attribute determines if link pulse generating and monitoring is enabled or disabled for a 10BaseT port. The attribute may take the values of enabled (stan…
1.3.6.1.4.1.43.10.17.2NodemrmMonitorPackage
1.3.6.1.4.1.43.10.17.2.1NodemrmMonRepeaterPackage
1.3.6.1.4.1.43.10.17.2.1.1TablemrmMonitorRepTablenot-accessiblemandatoryTable of performance and error statistics for the ports.
1.3.6.1.4.1.43.10.17.2.1.1.1RowmrmMonitorRepEntrynot-accessiblemandatoryThis table provides statistical and control information concerning the entire repeater.
1.3.6.1.4.1.43.10.17.2.1.1.1.1ColumnmrmMonRepServiceIdread-onlymandatoryThis parameter is used as the index in this table. A modular chassis contains potentially many repeater services. Each repeater service contains a number of ca…
1.3.6.1.4.1.43.10.17.2.1.1.1.2ColumnmrmMonRepReadableFramesread-onlymandatoryThis counter is incremented by one for each frame whose OctetCount is greater than or equal to minFrameSize and less than or equal to maxFrameSize and for whic…
1.3.6.1.4.1.43.10.17.2.1.1.1.3ColumnmrmMonRepUnicastFramesread-onlymandatoryThis counter is incremented by one for each readable frame seen by the Repeater that is addressed to a unicast (non Card) address.
1.3.6.1.4.1.43.10.17.2.1.1.1.4ColumnmrmMonRepMulticastFramesread-onlymandatoryThis counter is incremented by one for each readable frame seen by the Repeater that is addressed to a multicast (non broadcast) address.
1.3.6.1.4.1.43.10.17.2.1.1.1.5ColumnmrmMonRepBroadcastFramesread-onlymandatoryThis counter is incremented by one for each readable frame seen by the Repeater that is addressed to the broadcast address ffffffffffff.
1.3.6.1.4.1.43.10.17.2.1.1.1.6ColumnmrmMonRepReadableOctetsread-onlymandatoryThis counter is incremented by the octet count for each readable frame received by the repeater. NOTE: This counter does not really exist. It is calculated by …
1.3.6.1.4.1.43.10.17.2.1.1.1.7ColumnmrmMonRepUnicastOctetsread-onlymandatoryThis object is the number of octets contained in valid frames that have been received on this port in which the destination field was a unicast address. The ap…
1.3.6.1.4.1.43.10.17.2.1.1.1.8ColumnmrmMonRepMulticastOctetsread-onlymandatoryThis object is the number of octets contained in valid frames that have been received on this port in which the destination was a multicast address. The approx…
1.3.6.1.4.1.43.10.17.2.1.1.1.9ColumnmrmMonRepBroadcastOctetsread-onlymandatoryThis object is the number of octets contained in valid frames that have been received on this port in which the destination was the broadcast address fffffffff…
1.3.6.1.4.1.43.10.17.2.1.1.1.10ColumnmrmMonRepFCSErrorsread-onlymandatoryThis counter is incremented by one for each frame with an FCS error that does not have a framing error and which is of legal frame size received by the repeate…
1.3.6.1.4.1.43.10.17.2.1.1.1.11ColumnmrmMonRepAlignmentErrorsread-onlymandatoryThis counter is incremented by one for each frame with an FCS error that does have a framing error and which is of legal frame size received by the repeater. N…
1.3.6.1.4.1.43.10.17.2.1.1.1.12ColumnmrmMonRepFrameTooLongsread-onlymandatoryThis counter is incremented by one for each frame whose octet count is greater than the max frame size that is received by the repeater. NOTE: This counter doe…
1.3.6.1.4.1.43.10.17.2.1.1.1.13ColumnmrmMonRepShortEventsread-onlymandatoryThis counter is incremented by one for each carrier event whose duration is less than short event max time that is detected by the repeater. NOTE: This counter…
1.3.6.1.4.1.43.10.17.2.1.1.1.14ColumnmrmMonRepRuntsread-onlymandatoryThis counter is incremented by one for each carrier event whose duration is greater than short event max time and less than valid packet min time and which doe…
1.3.6.1.4.1.43.10.17.2.1.1.1.15ColumnmrmMonRepTxCollisionsread-onlymandatoryThis counter is incremented by one for any CarrierEvent signal on any port of this repeater for which the CollisionEvent signal on this port is asserted. The a…
1.3.6.1.4.1.43.10.17.2.1.1.1.16ColumnmrmMonRepLateEventsread-onlymandatoryThis counter is incremented by one each time a collisions occurs after valid packet min time, a late event is counted as both a collision and as a late event. …
1.3.6.1.4.1.43.10.17.2.1.1.1.17ColumnmrmMonRepVeryLongEventsread-onlymandatoryThis counter is incremented by one each time a carrier event occurs whose duration is greater than the MAU Jabber Lockup Protection time. NOTE: This counter do…
1.3.6.1.4.1.43.10.17.2.1.1.1.18ColumnmrmMonRepDataRateMismatchesread-onlymandatoryThis counter is incremented by one each time a packet has been received by this repeater with the data rate detectably mismatched from the local frequency. NOT…
1.3.6.1.4.1.43.10.17.2.1.1.1.19ColumnmrmMonRepAutoPartitionsread-onlymandatoryThis counter is incremented by one each time the repeater has automatically partitioned any port. NOTE: This counter does not really exist. It is calculated by…
1.3.6.1.4.1.43.10.17.2.1.1.1.20ColumnmrmMonRepTotalErrorsread-onlymandatoryThe total number of errors which have occurred on all ports on all groups of this repeater. This counter is the summation of the values of the mrmMonCardTotalE…
1.3.6.1.4.1.43.10.17.2.1.1.1.21ColumnmrmMonRepBound0read-onlymandatoryThis object is a summation of the number of frames (including error frames) with a length of 64 octets which were received by each port on every card of this r…
1.3.6.1.4.1.43.10.17.2.1.1.1.22ColumnmrmMonRepBound1read-onlymandatoryThis object is a summation of the number of frames (including error frames) with a length of between 65 and 127 octets inclusive which were received by each po…
1.3.6.1.4.1.43.10.17.2.1.1.1.23ColumnmrmMonRepBound2read-onlymandatoryThis object is a summation of the number of frames (including error frames) with a length of between 128 and 255 octets inclusive which were received by each p…
1.3.6.1.4.1.43.10.17.2.1.1.1.24ColumnmrmMonRepBound3read-onlymandatoryThis object is a summation of the number of frames (including error frames) with a length of between 256 and 511 octets inclusive which were received by each p…
1.3.6.1.4.1.43.10.17.2.1.1.1.25ColumnmrmMonRepBound4read-onlymandatoryThis object is a summation of the number of frames (including error frames) with a length of between 512 and 1023 octets inclusive which were received by each …
1.3.6.1.4.1.43.10.17.2.1.1.1.26ColumnmrmMonRepBound5read-onlymandatoryThis object is a summation of the number of frames (including error frames) with a length of between 1024 and 1518 octets inclusive which were received by each…
1.3.6.1.4.1.43.10.17.2.1.1.1.27ColumnmrmMonRepActionwrite-onlymandatoryThis object allows repeater stats specific actions to be implemented. There is only one action currently defined, 'clearCounters'. Writing this value to a repe…
1.3.6.1.4.1.43.10.17.2.2NodemrmMonCardPackage
1.3.6.1.4.1.43.10.17.2.2.1TablemrmMonitorCardTablenot-accessiblemandatoryThis table contains parameters about the various repeater cards within the chassis. The table is indexed using the 'serviceIndex' for the repeater and the slot…
1.3.6.1.4.1.43.10.17.2.2.1.1RowmrmMonitorCardEntrynot-accessiblemandatoryStatus information and control variables for the ports on a single card.
1.3.6.1.4.1.43.10.17.2.2.1.1.1ColumnmrmMonCardServiceIdread-onlymandatoryThis parameter is used as the first of two indices in this table. A modular chassis contains potentially many repeater services. Each repeater service contains…
1.3.6.1.4.1.43.10.17.2.2.1.1.2ColumnmrmMonCardIndexread-onlymandatoryThis is the second part of the key on this table. Having selected one of the repeaters within the chassis it is necessary to identify the card within that repe…
1.3.6.1.4.1.43.10.17.2.2.1.1.3ColumnmrmMonCardReadableFramesread-onlymandatoryThis counter is incremented by one for each frame whose OctetCount is greater than or equal to minFrameSize and less than or equal to maxFrameSize and for whic…
1.3.6.1.4.1.43.10.17.2.2.1.1.4ColumnmrmMonCardUnicastFramesread-onlymandatoryThis counter is incremented by one for each readable frame seen by the Card that is addressed to a unicast (non Card) address.
1.3.6.1.4.1.43.10.17.2.2.1.1.5ColumnmrmMonCardMulticastFramesread-onlymandatoryThis counter is incremented by one for each readable frame seen by the Card that is addressed to a multicast (non broadcast) address.
1.3.6.1.4.1.43.10.17.2.2.1.1.6ColumnmrmMonCardBroadcastFramesread-onlymandatoryThis counter is incremented by one for each readable frame seen by the Card that is addressed to the broadcast address ffffffffffff.
1.3.6.1.4.1.43.10.17.2.2.1.1.7ColumnmrmMonCardReadableOctetsread-onlymandatoryThis counter is incremented by the octet count for each readable frame received by any port on this card.
1.3.6.1.4.1.43.10.17.2.2.1.1.8ColumnmrmMonCardUnicastOctetsread-onlymandatoryThis object is the number of octets contained in valid frames that have been received on this port in which the destination field was a unicast address. The ap…
1.3.6.1.4.1.43.10.17.2.2.1.1.9ColumnmrmMonCardMulticastOctetsread-onlymandatoryThis object is the number of octets contained in valid frames that have been received on this port in which the destination was a multicast address. The approx…
1.3.6.1.4.1.43.10.17.2.2.1.1.10ColumnmrmMonCardBroadcastOctetsread-onlymandatoryThis object is the number of octets contained in valid frames that have been received on this port in which the destination was the broadcast address fffffffff…
1.3.6.1.4.1.43.10.17.2.2.1.1.11ColumnmrmMonCardFCSErrorsread-onlymandatoryThis counter is incremented by one for each frame with an FCS error that does not have a framing error and which is of legal frame size.
1.3.6.1.4.1.43.10.17.2.2.1.1.12ColumnmrmMonCardAlignmentErrorsread-onlymandatoryThis counter is incremented by one for each frame with an FCS error that does have a framing error and which is of legal frame size .
1.3.6.1.4.1.43.10.17.2.2.1.1.13ColumnmrmMonCardFrameTooLongsread-onlymandatoryThis counter is incremented by one for each frame whose octet count is greater than the max frame size that is received by the repeater.
1.3.6.1.4.1.43.10.17.2.2.1.1.14ColumnmrmMonCardShortEventsread-onlymandatoryThis counter is incremented by one for each carrier event whose duration is less than short event max time that is detected.
1.3.6.1.4.1.43.10.17.2.2.1.1.15ColumnmrmMonCardRuntsread-onlymandatoryThis counter is incremented by one for each carrier event whose duration is greater than short event max time and less than valid packet min time and which doe…
1.3.6.1.4.1.43.10.17.2.2.1.1.16ColumnmrmMonCardLateEventsread-onlymandatoryThis counter is incremented by one each time a collisions occurs after valid packet min time, a late event is counted as both a collision and as a late event.
1.3.6.1.4.1.43.10.17.2.2.1.1.17ColumnmrmMonCardVeryLongEventsread-onlymandatoryThis counter is incremented by one each time a carrier event occurs whose duration is greater than the MAU Jabber Lockup Protection time.
1.3.6.1.4.1.43.10.17.2.2.1.1.18ColumnmrmMonCardDataRateMismatchesread-onlymandatoryThis counter is incremented by one each time a packet has been received with the data rate detectably mismatched from the local frequency.
1.3.6.1.4.1.43.10.17.2.2.1.1.19ColumnmrmMonCardAutoPartitionsread-onlymandatoryThis counter is incremented by one each time the repeater has automatically partitioned any port.
1.3.6.1.4.1.43.10.17.2.2.1.1.20ColumnmrmMonCardTotalErrorsread-onlymandatoryThe total number of errors which have occurred on all ports of this card. This counter is the summation of the values of other error counters (for each port), …
1.3.6.1.4.1.43.10.17.2.2.1.1.21ColumnmrmMonCardBound0read-onlymandatoryThis object is a summation of the number of frames (including error frames) with a length of 64 octets which were received by each port on this card.
1.3.6.1.4.1.43.10.17.2.2.1.1.22ColumnmrmMonCardBound1read-onlymandatoryThis object is a summation of the number of frames (including error frames) with a length of between 65 and 127 octets inclusive which were received by each po…
1.3.6.1.4.1.43.10.17.2.2.1.1.23ColumnmrmMonCardBound2read-onlymandatoryThis object is a summation of the number of frames (including error frames) with a length of between 128 and 255 octets inclusive which were received by each p…
1.3.6.1.4.1.43.10.17.2.2.1.1.24ColumnmrmMonCardBound3read-onlymandatoryThis object is a summation of the number of frames (including error frames) with a length of between 256 and 511 octets inclusive which were received by each p…
1.3.6.1.4.1.43.10.17.2.2.1.1.25ColumnmrmMonCardBound4read-onlymandatoryThis object is a summation of the number of frames (including error frames) with a length of between 512 and 1023 octets inclusive which were received by each …
1.3.6.1.4.1.43.10.17.2.2.1.1.26ColumnmrmMonCardBound5read-onlymandatoryThis object is a summation of the number of frames (including error frames) with a length of between 1024 and 1518 octets inclusive which were received by each…
1.3.6.1.4.1.43.10.17.2.2.1.1.27ColumnmrmMonCardClearCounterswrite-onlymandatoryThis attribute allows all counters on this Card to be cleared.
1.3.6.1.4.1.43.10.17.2.3NodemrmMonPortPackage
1.3.6.1.4.1.43.10.17.2.3.1TablemrmMonitorPortTablenot-accessiblemandatoryTable of performance and error statistics for the ports.
1.3.6.1.4.1.43.10.17.2.3.1.1RowmrmMonitorPortEntrynot-accessiblemandatoryPerformance and error statistics for a single port.
1.3.6.1.4.1.43.10.17.2.3.1.1.1ColumnmrmMonPortServiceIdread-onlymandatoryThis parameter selects one of the repeaters within the chassis. This forms the first, most significant index column. Having selected a repeater one must select…
1.3.6.1.4.1.43.10.17.2.3.1.1.2ColumnmrmMonPortCardIndexread-onlymandatoryThis attribute uniquely identifies this Card within the repeater, it is part of the index for the port table.
1.3.6.1.4.1.43.10.17.2.3.1.1.3ColumnmrmMonPortIndexread-onlymandatoryThis attribute uniquely identifies this port within the Card, it is part of the index for the port table.
1.3.6.1.4.1.43.10.17.2.3.1.1.4ColumnmrmMonPortReadableFramesread-onlymandatoryThis object is the number of frames of valid frame length that have been received on this port. This counter is incremented by one for each frame received on t…
1.3.6.1.4.1.43.10.17.2.3.1.1.5ColumnmrmMonPortUnicastFramesread-onlymandatoryThis counter is incremented by one for each readable frame seen by the Card that is addressed to a unicast (non Card) address.
1.3.6.1.4.1.43.10.17.2.3.1.1.6ColumnmrmMonPortMulticastFramesread-onlymandatoryThis counter is incremented by one for each readable frame seen by the Card that is addressed to a multicast (non broadcast) address.
1.3.6.1.4.1.43.10.17.2.3.1.1.7ColumnmrmMonPortBroadcastFramesread-onlymandatoryThis counter is incremented by one for each readable frame seen by the Card that is addressed to the broadcast address.
1.3.6.1.4.1.43.10.17.2.3.1.1.8ColumnmrmMonPortReadableOctetsread-onlymandatoryThis object is the number of octets contained in valid frames that have been received on this port. This counter is incremented by OctetCount for each frame re…
1.3.6.1.4.1.43.10.17.2.3.1.1.9ColumnmrmMonPortUnicastOctetsread-onlymandatoryThis object is the number of octets contained in valid frames that have been received on this port in which the destination field was a unicast address. The ap…
1.3.6.1.4.1.43.10.17.2.3.1.1.10ColumnmrmMonPortMulticastOctetsread-onlymandatoryThis object is the number of octets contained in valid frames that have been received on this port in which the destination was a multicast address. The approx…
1.3.6.1.4.1.43.10.17.2.3.1.1.11ColumnmrmMonPortBroadcastOctetsread-onlymandatoryThis object is the number of octets contained in valid frames that have been received on this port in which the destination was the broadcast address fffffffff…
1.3.6.1.4.1.43.10.17.2.3.1.1.12ColumnmrmMonPortFCSErrorsread-onlymandatoryThis counter is incremented by one for each frame received on this port with the FCSError signal asserted and the FramingError and CollisionEvent signals deass…
1.3.6.1.4.1.43.10.17.2.3.1.1.13ColumnmrmMonPortAlignmentErrorsread-onlymandatoryThis counter is incremented by one for each frame received on this port with the FCSError and FramingError signals asserted and CollisionEvent signal deasserte…
1.3.6.1.4.1.43.10.17.2.3.1.1.14ColumnmrmMonPortFrameTooLongsread-onlymandatoryThis counter is incremented by one for each frame received on this port whose OctetCount is greater than maxFrameSize (Ref: 4.4.2.1, IEEE 802.3 Std). If this p…
1.3.6.1.4.1.43.10.17.2.3.1.1.15ColumnmrmMonPortShortEventsread-onlymandatoryThis counter is incremented by one for each CarrierEvent on this port with ActivityDuration less than ShortEventMaxTime. ShortEventMaxTime is greater than 74 b…
1.3.6.1.4.1.43.10.17.2.3.1.1.16ColumnmrmMonPortRuntsread-onlymandatoryThis counter is incremented by one for each CarrierEvent on this port that meets one of the following two conditions. Only one test need be made. a) The Activi…
1.3.6.1.4.1.43.10.17.2.3.1.1.17ColumnmrmMonPortCollisionsread-onlymandatoryThis counter is incremented by one each time a collision is detected on this port or when the CollisionEvent signal is asserted on this port. The approximate m…
1.3.6.1.4.1.43.10.17.2.3.1.1.18ColumnmrmMonPortLateEventsread-onlymandatoryThis counter is incremented by one for each CarrierEvent on this port in which the CollIn(X) variable transitions to the value SQE (Ref: 9.6.6.2, IEEE 802.3 St…
1.3.6.1.4.1.43.10.17.2.3.1.1.19ColumnmrmMonPortVeryLongEventsread-onlymandatoryThis counter is incremented by one for each CarrierEvent on this port whose ActivityDuration is greater than the MAU Jabber Lockup Protection timer TW3 (Ref: 9…
1.3.6.1.4.1.43.10.17.2.3.1.1.20ColumnmrmMonPortDataRateMismatchesread-onlymandatoryThis counter is incremented by one for each frame received on this port that meets all of the following conditions: a) The CollisionEvent signal is not asserte…
1.3.6.1.4.1.43.10.17.2.3.1.1.21ColumnmrmMonPortAutoPartitionsread-onlymandatoryThis counter is incremented by one for each time the repeater has automatically partitioned this port. The conditions that cause port partitioning are specifie…
1.3.6.1.4.1.43.10.17.2.3.1.1.22ColumnmrmMonPortTotalErrorsread-onlymandatoryThe total number of errors which have occurred on this port. This counter is the summation of the values of other error counters (for the same port), namely: F…
1.3.6.1.4.1.43.10.17.2.3.1.1.23ColumnmrmMonPortBound0read-onlymandatoryThis object is the number of frames (including error frames) with a length of 64 octets which were received on this port.
1.3.6.1.4.1.43.10.17.2.3.1.1.24ColumnmrmMonPortBound1read-onlymandatoryThis object is the number of frames (including error frames) with a length of between 65 and 127 octets inclusive which were received on this port.
1.3.6.1.4.1.43.10.17.2.3.1.1.25ColumnmrmMonPortBound2read-onlymandatoryThis object is the number of frames (including error frames) with a length of between 128 and 255 octets inclusive which were received on this port.
1.3.6.1.4.1.43.10.17.2.3.1.1.26ColumnmrmMonPortBound3read-onlymandatoryThis object is the number of frames (including error frames) with a length of between 256 and 511 octets inclusive which were received on this port.
1.3.6.1.4.1.43.10.17.2.3.1.1.27ColumnmrmMonPortBound4read-onlymandatoryThis object is the number of frames (including error frames) with a length of between 512 and 1023 octets inclusive which were received on this port.
1.3.6.1.4.1.43.10.17.2.3.1.1.28ColumnmrmMonPortBound5read-onlymandatoryThis object is the number of frames (including error frames) with a length of between 1024 and 1518 octets inclusive which were received on this port.
1.3.6.1.4.1.43.10.17.2.3.1.1.29ColumnmrmMonPortBandwidthUsedread-onlymandatoryThis is a high level 'smart MIB' object. This object provides a running average of the bandwidth in use. This value is calculated locally on the agent and so d…
1.3.6.1.4.1.43.10.17.2.3.1.1.30ColumnmrmMonPortErrorsPer10000Packetsread-onlymandatoryThis is a high level 'smart MIB' object. This object provides a running average of the bandwidth in use. The value of this value is calculated locally on the a…
1.3.6.1.4.1.43.10.17.2.3.1.1.31ColumnmrmMonPortClearCounterswrite-onlymandatoryThis attribute allows all counters on this Port to be cleared.
1.3.6.1.4.1.43.10.17.2.3.1.1.32ColumnmrmMonPortLastAddressread-onlymandatoryThis is the last MAC address seen on this port.
1.3.6.1.4.1.43.10.17.2.3.1.1.33ColumnmrmMonPortAddressChangesread-onlymandatoryThis is a count of the number of times the MAC address on this port has changed. A high number of changes indicates this is either an inter-repeater link or a …
1.3.6.1.4.1.43.10.17.2.4NodemrmMonDummyPackage
1.3.6.1.4.1.43.10.17.2.4.1ScalartrafficLevelread-onlymandatoryThis is a dummy 'smart MIB' object which is used internally by the agent to provide a running average of the bandwidth in use. It should not be accessed by a m…
1.3.6.1.4.1.43.10.17.2.4.2ScalarerrorFramesread-onlymandatoryThis is a dummy 'smart MIB' object which is used internally by the agent to provide a running average of the error rate. It should not be accessed by a managem…
1.3.6.1.4.1.43.10.18NodebridgeMgmt
1.3.6.1.4.1.43.10.19Nodefault
1.3.6.1.4.1.43.10.19.1ScalarfaultModifiedFlagread-writemandatoryIn order to ensure a clean read of the Fault table this flag should be set to clean_read when commencing to read the table and should be examined after reading…
1.3.6.1.4.1.43.10.19.2TablefaultTablenot-accessiblemandatoryThe Fault Table.
1.3.6.1.4.1.43.10.19.2.1RowfaultEntrynot-accessiblemandatoryInformation relating to a single fault.
1.3.6.1.4.1.43.10.19.2.1.1ColumnfaultIndexread-onlymandatoryThe index into the Fault table. The initial read from the table should be read as the next, from an index of 0; subsequent reads should read the next from the …
1.3.6.1.4.1.43.10.19.2.1.2ColumnfaultErrorNumberread-onlymandatoryThis error number for this fault log entry.
1.3.6.1.4.1.43.10.19.2.1.3ColumnfaultTimeStampread-onlymandatoryThe time since startup, in milliseconds, when the fault occurred.
1.3.6.1.4.1.43.10.19.2.1.4ColumnfaultRestartCountread-onlymandatoryThe number of restarts at time of fault.
1.3.6.1.4.1.43.10.20Nodepoll
1.3.6.1.4.1.43.10.20.1TablepollTablenot-accessiblemandatoryThis table is used to provide remote device monitoring facilities. This table allows a list of network devices to be set up and polled regularly (or only once)…
1.3.6.1.4.1.43.10.20.1.1RowpollTableEntrynot-accessiblemandatoryA table used to define device monitoring.
1.3.6.1.4.1.43.10.20.1.1.1ColumnpollIndexread-onlymandatoryUnique identifier of a row in the Poll Table. The actual number of rows that can be created on any particular device depends on the memory and processing resou…
1.3.6.1.4.1.43.10.20.1.1.2ColumnpollAddressread-writemandatoryThis DisplayString is the network address of the device to monitor. Typically this is an IP, MAC or IPX address. The following formats can be used. IP nnn.nnn.…
1.3.6.1.4.1.43.10.20.1.1.3ColumnpollProtocolread-writemandatoryThis defines the protocol to use with which to monitor the device. Writing an address to the pollAddress field causes a default pollProtocol value to be setup.…
1.3.6.1.4.1.43.10.20.1.1.4ColumnpollRateread-writemandatoryThis defines how often a poll packet is sent to the device. If once-only(1) is chosen, then when the RowStatus is set to active, a single poll packet is to be …
1.3.6.1.4.1.43.10.20.1.1.5ColumnpollTargetTyperead-writemandatoryThis field is provided solely for the purpose of the Network Management station to allow extra information to be stored about this poll table entry. This value…
1.3.6.1.4.1.43.10.20.1.1.6ColumnpollLastPollSentread-onlymandatoryReading this variable returns the sysUpTime at which the last poll was sent to the device. A value of 0 means that no polls have been sent or that the poll cou…
1.3.6.1.4.1.43.10.20.1.1.7ColumnpollRoundTripTimeread-onlymandatoryThis is the round trip time in milli-seconds of the most recent poll to the pollAddress device. A value of 0 means that no reply has been received from the las…
1.3.6.1.4.1.43.10.20.1.1.8ColumnpollInformationread-onlymandatoryAfter each successful poll, this field is updated with some protocol specific information that was gleaned from the packet exchange. For the IPX protocol, this…
1.3.6.1.4.1.43.10.20.1.1.9ColumnpollAlarmIndexread-onlymandatoryThis is a value of alarmIndex from the RMON Alarm Table. The alarm indicated is being used by the PollTable to provide the timing and trap generation facilitie…
1.3.6.1.4.1.43.10.20.1.1.10ColumnpollOwnerread-writemandatoryThe RMON OwnerString conventions are used here to help control the multi-manager situations. This data type is used to model an administratively assigned name …
1.3.6.1.4.1.43.10.20.1.1.11ColumnpollRowStatusread-writemandatoryThe SNMPv2 RowStatus convention. Notes: 1) Writing any data to a destroyed row, changes its state to notReady. 2) If the status is active or notInService and a…
1.3.6.1.4.1.43.10.20.2ScalarpollNextFreeIndexread-onlymandatoryIndicates the the next value of pollIndex which can be used to create the next poll entry. This value is set to zero if there are no free rows in the table.
1.3.6.1.4.1.43.10.21NodepowerSupply
1.3.6.1.4.1.43.11NodenetBuilder-mib
1.3.6.1.4.1.43.12NodelBridgeECS-mib
1.3.6.1.4.1.43.13NodedeskMan-mib
1.3.6.1.4.1.43.13NodeheartbeatEventGenerated at a regular interval to inform the manager this device is still operating and can be reached on the network.
1.3.6.1.4.1.43.14NodelinkBuilderMSH-mib
1.3.6.1.4.1.43.14NodelocalManagementUpdateA local management update trap indicates that the configuration of the device has been modified via the ascii agent. This may be through Telnet or the V24 port.
1.3.6.1.4.1.43.14.2NodesnmpDot3RpMauMgt
1.3.6.1.4.1.43.14.2.1NoderpMauBasicGroup
1.3.6.1.4.1.43.14.2.1.1TablerpMauTablenot-accessiblemandatoryTable of descriptive and status information about the groups of ports.
1.3.6.1.4.1.43.14.2.1.1.1RowrpMauEntrynot-accessiblemandatoryAn entry in the table, containing information about a single group of ports.
1.3.6.1.4.1.43.14.2.1.1.1.1ColumnrpMauGroupIndexread-onlymandatoryThis variable uniquely identifies the repeater group that contains the port to which is connected the MAU for which this entry contains information.
1.3.6.1.4.1.43.14.2.1.1.1.2ColumnrpMauPortIndexread-onlymandatoryThis variable uniquely identifies the repeater port to which is connected the MAU for which this entry contains information.
1.3.6.1.4.1.43.14.2.1.1.1.3ColumnrpMauIndexread-onlymandatoryThis variable uniquely identifies the MAU for which this entry contains information.
1.3.6.1.4.1.43.14.2.1.1.1.4ColumnrpMauTyperead-onlymandatoryA value that identifies the 10 Mb/s baseband MAU type. The enumeration of the type is such that the value matches the section number of the IEEE 802.3 standard…
1.3.6.1.4.1.43.14.2.1.1.1.5ColumnrpMauAdminStateread-writemandatoryThe administrative state of the MAU. This object may be implemented as a read-only object by those agents and MAUs that do not implement software control of th…
1.3.6.1.4.1.43.14.2.1.1.1.6ColumnrpMauMediaAvailableread-onlymandatoryIf the MAU is a link or fiber type (FOIRL, 10BASE-T, 10BASE-F) then this is equivalent to the link integrity/low light state. For an AUI or coax MAU this indic…
1.3.6.1.4.1.43.14.2.1.1.1.7ColumnrpMauLostMediasread-onlymandatoryA count of the number of times that rpMauMediaAvailable for this MAU instance leaves the state available(3). Implementation of this object is mandatory for MAU…
1.3.6.1.4.1.43.14.2.1.1.1.8ColumnrpMauJabberStateread-onlymandatoryIf the MAU is in jabber state the attribute is set to the jabbering(4) value. This object returns the value other(1) for MAU type AUI.
1.3.6.1.4.1.43.14.2.1.1.1.9ColumnrpMauJabbersread-onlymandatoryA count of the number of times that rpMauJabberState for this MAU instance enters the state jabbering(4).
1.3.6.1.4.1.43.14.3NoderingBuilder
1.3.6.1.4.1.43.14.3.1TableringBuilderTablenot-accessiblemandatoryThis table contains information about the LinkBuilder MSH Ring Builder module.
1.3.6.1.4.1.43.14.3.1.1RowringBuilderTableEntrynot-accessiblemandatoryThis table contains an entry for each ring builder in a chassis.
1.3.6.1.4.1.43.14.3.1.1.1ColumnrbServiceIdread-onlymandatoryThis identifies one of potentially several ring builders within the chassis.
1.3.6.1.4.1.43.14.3.1.1.3ColumnrbRingInMediaread-onlymandatoryThis object identifies the physical media to which the Ring In port of the Ring Builder is, or could be, connected.
1.3.6.1.4.1.43.14.3.1.1.4ColumnrbRingInModeread-writemandatoryEach ring builder has two external trunk connections by which a ring builder may be connected to other token ring devices capable of supporting a backup path, …
1.3.6.1.4.1.43.14.3.1.1.5ColumnrbRingInStateread-onlymandatoryEach ring builder has two external trunk connections by which a ring builder may be connected to other token ring devices capable of supporting a backup path, …
1.3.6.1.4.1.43.14.3.1.1.6ColumnrbRingOutMediaread-onlymandatoryThis object identifies the physical media to which the Ring Out port of the Ring Builder is, or could be, connected.
1.3.6.1.4.1.43.14.3.1.1.7ColumnrbRingOutModeread-writemandatoryEach ring builder has two external trunk connections by which a ring builder may be connected to other token ring devices capable of supporting a backup path, …
1.3.6.1.4.1.43.14.3.1.1.8ColumnrbRingOutStateread-onlymandatoryEach ring builder has two external trunk connections by which a ring builder may be connected to other token ring devices capable of supporting a backup path, …
1.3.6.1.4.1.43.14.3.1.1.9ColumnrbModeread-writemandatoryAs well as providing control over network connection at the ring in and ring out ports, the Ringbuilder has three modes that also control the interaction with …
1.3.6.1.4.1.43.14.3.1.1.10ColumnrbTestread-writemandatorySetting this object to test(2) causes the Ringbuilder to execute a test by transmitting a frame to itself and checking that it is properly received. The test d…
1.3.6.1.4.1.43.14.3.1.1.11ColumnrbDRIStateread-writemandatoryDistributive Recovery Interface ( DRI ) allows the Active MAU to determine which of its stations are beaconing or causing problems on the ring. MAU ports are d…
1.3.6.1.4.1.43.14.3.2TableringMauPortTablenot-accessiblemandatoryThis table contains an entry for every port on every MAU in the local ring section controlled by the ring builder.
1.3.6.1.4.1.43.14.3.2.1RowringMauPortTableEntrynot-accessiblemandatoryThis table contains an entry for every MAU port in the local ring section.
1.3.6.1.4.1.43.14.3.2.1.1ColumnrbMauServiceIdread-onlymandatoryThis identifies one of potentially several ring builders within the chassis.
1.3.6.1.4.1.43.14.3.2.1.2ColumnrbMauSlotread-onlymandatoryEach ring service is implemented by a ring builder and a number of MAU cards. Each MAU card provides a number of ports to which Token Ring stations connect. Th…
1.3.6.1.4.1.43.14.3.2.1.3ColumnrbMauPortread-onlymandatoryEach MAU card contains a number of ports. A row in this table represents one of those ports. This index identifies that port.
1.3.6.1.4.1.43.14.3.2.1.4ColumnrbMauMediaread-onlymandatoryThis object identifies the physical media to which this MAU port is, or could be, connected.
1.3.6.1.4.1.43.14.3.2.1.5ColumnrbMauPortAdminStateread-writemandatoryEach MAU port may be enabled or disabled for insertion. Enabling a port means that if some station should attempt to insert on that port then it will be connec…
1.3.6.1.4.1.43.14.3.2.1.6ColumnrbMauPortAttachStateread-onlymandatoryEach MAU port is capable of determining whether a station is currently asserting phantom voltage on that port. This indicates that a station is successfully at…
1.3.6.1.4.1.43.14.3.2.1.8ColumnrbMauPortZDLStateread-writemandatoryZero Delay Lock-out(ZDL) enables the Active MAU to lock-out any station which is transmitting poor quality data , or is set to the wrong ring speed. ZDL locks …
1.3.6.1.4.1.43.14.3.2.1.9ColumnrbMauPortDisableReasonread-onlymandatoryThis item indicates the reason for disabling a port.
1.3.6.1.4.1.43.14.3.3TableringBuilderMACTablenot-accessiblemandatoryThis is a table of the MAC address(es) assigned to the Ringbuilder card.
1.3.6.1.4.1.43.14.3.3.1RowringBuilderMACTableEntrynot-accessiblemandatoryThis table contains an entry for each MAC on each ring builder in a chassis.
1.3.6.1.4.1.43.14.3.3.1.1ColumnrbMACServiceIdread-onlymandatoryThis identifies one of potentially several ring builders within the chassis.
1.3.6.1.4.1.43.14.3.3.1.2ColumnrbMACinstanceread-onlymandatoryA Ringbuilder has two MACs, one for the main ring and one for the backup ring. The main ring is MAC instance 1, and the backup ring MAC instance 2.
1.3.6.1.4.1.43.14.3.3.1.3ColumnrbMACAddressread-onlymandatoryThis is the MAC address for the specified Ringbuilder and MAC instance.
1.3.6.1.4.1.43.15NodelinkBuilderFMS-mib
1.3.6.1.4.1.43.15NodesecurityViolationA security violation trap indicates that a user has attempted to login and failed to enter the correct password Three times consecutively.
1.3.6.1.4.1.43.16NodegaugesThresholdTrapGenerated when the Alarm value for this Alarm crosses the Threshold Level.
1.3.6.1.4.1.43.16NodelinkBuilderFDDI-wghub-mib
1.3.6.1.4.1.43.17NodegaugesRecoveryTrapGenerated when the Alarm value for this Alarm crosses the Recovery Level.
1.3.6.1.4.1.43.17NodelinkSwitch-mib
1.3.6.1.4.1.43.18NodeslFailedWhen a system load is requested, a response is returned immediately and the load proceeds in the background. If an error is detected this trap is generated ind…
1.3.6.1.4.1.43.19NodeestStateChangeWhen the end-station table moves from the noChange to modified state this trap is generated. The trap is sent once on this transition and not subsequently unti…
1.3.6.1.4.1.43.20NodeestTableFullWhen the end-station table becomes full this trap is generated.
1.3.6.1.4.1.43.27NodephyEntityInsertedThis trap is sent when a new entity is detected in the chassis. The entity is identified both by its location in the chassis and it's type information. The dis…
1.3.6.1.4.1.43.28NodephyEntityRemovedThis trap is sent when an entity is removed. The qualifier information on the variables identify the location of the entity that has been removed while the ent…
1.3.6.1.4.1.43.29NodephyFacilityChangedThis trap is sent when the facility table is changed. This trap is only send when the change is made as the result of a local management request. The trap incl…
1.3.6.1.4.1.43.30NodeserviceEntityAddedThis trap is sent when a card is added to a service. This trap is always sent, regardless of how the card addition occurred. There are two situations in which …
1.3.6.1.4.1.43.31NodeserviceEntityRemovedThis trap is sent when an entity is removed from a service. This trap is always sent, regardless of how the card removal occurred. There are two situations in …
1.3.6.1.4.1.43.32NodephysicalStateChangeA physical entity in the rack has changed state. This can be the result of a failure or recovery. The variables accompanying this trap identify the entity whic…
1.3.6.1.4.1.43.33NodepsuCapacityExceededThe combination of the power requirements of all the entities in the chassis has been calculated to exceed the power capacity of the power supplies present in …
1.3.6.1.4.1.43.34NodetempStateChangeMounted on the Management card is a temperature sensing device. This device provides three output levels : OK, WARM and DANGER. DANGER causes a trap to be gene…
1.3.6.1.4.1.43.35NodestatusInputStateChangeSent when the state of one of the management card status inputs changes from open to close or vice-versa and the value of statusTrapEnable is 'enable'
1.3.6.1.4.1.43.36NodemrmStationLearnTrapThis trap indicates that this port has autolearnt an end station address.
1.3.6.1.4.1.43.37NodemrmSecurityTrapThis trap indicates that this port has detected a security violation.
1.3.6.1.4.1.43.38NoderepPartitionStateChangeThis trap is sent when the partition state of a port changes. The trap is accompanied by the new partition state of the port.
1.3.6.1.4.1.43.39NoderepLinkStateChangeThis trap is sent when the link state of a port changes. The var-bind identifies which port has changed state and what the new state of that port is.
1.3.6.1.4.1.43.40NoderepAdminStateChangeThis trap is only sent when the administration state of a port is changed by a gauge. It is not sent if a user initiates a state change via SNMP, Telnet or the…
1.3.6.1.4.1.43.41NoderepPortTopUsageThis trap is sent when the port bandwidth used exceeds the defined threshold. This threshold is by default 15%, although this may have been changed on a partic…
1.3.6.1.4.1.43.42NoderepPortErrorsThis trap is sent when the errors per packet exceeds the the defined threshold.
1.3.6.1.4.1.43.43NoderesResilienceSwitchThis trap is generated when a change of state of one of the ports in a resilient pair does not result in a switch of active port. If such a switch were to occu…
1.3.6.1.4.1.43.44NoderesStateChangeThis trap is generated when a change of state of one of the ports in a resilient pair does not result in a switch of active port. If such a switch were to occu…
1.3.6.1.4.1.43.45Nodea3ComRingTopologyChangeThis trap is sent when a logical device detects a change in the topology of the ring. The var-bind list identifies which of the logical devices detected the ch…
1.3.6.1.4.1.43.46Nodea3ComRingStateChangeThis trap is sent when the state of the main ring is seen to change. The var-bind specifies the new state of the ring.
1.3.6.1.4.1.43.47Nodea3ComRingBackupStateChangeThis trap is sent when the state of the backup ring is seen to change. The var-bind specifies the new state of the ring.
1.3.6.1.4.1.43.48Nodea3ComRingWrapChangeThis trap indicates either that the main and backup rings have wrapped, or that the wrap condition has been removed. The var-bind indicates the new state.
1.3.6.1.4.1.43.49Nodea3ComAttachStateChangeThis trap is sent if the value of the attach state for a particular port changes AND the admin state of that port is disabled.
1.3.6.1.4.1.43.50NoderbRingInStateChangeThis trap is sent if the Ring In port changes state while the mode of the port is 'fail safe'.
1.3.6.1.4.1.43.51NoderbRingOutStateChangeThis trap is sent if the Ring Out port changes state while the mode of the port is 'fail safe'.
1.3.6.1.4.1.43.60NoderbMauPortStateChangeThis trap is sent if the MAU port changes state due to operation of ZDL or DRI.
1.3.6.1.4.1.43.61NodepollTableSuccessTrapThis trap is generated when the PollTable in the managed agent receives a reply to a poll after a sequence of four or more un-successful polls.
1.3.6.1.4.1.43.62NodepollTableFailedTrapThis trap is generated when the PollTable in the managed agent fails to receive a reply to four successive polls.
1.3.6.1.5.1TablesecurityEnableTablenot-accessiblemandatoryA table of permissions for access to the managed device from each of its interfaces, at each security access level. The table is fixed at 5 rows, indexed by th…
1.3.6.1.5.1.1RowsecurityEnableTableEntrynot-accessiblemandatoryThis table allows individual interfaces to be enabled or disabled separately for each security level.
1.3.6.1.5.1.1.1ColumnsecurityLevelread-onlymandatoryIndex to the security enable table.
1.3.6.1.5.1.1.2ColumnsecurityCommunityEnableread-writemandatoryCommunity SNMP access permission
1.3.6.1.5.1.1.3ColumnsecuritySecureEnableread-writemandatorySecure SNMP access permission
1.3.6.1.5.1.1.4ColumnsecurityTermEnableread-writemandatoryLocal Terminal access permission
1.3.6.1.5.1.1.5ColumnsecurityTelnetEnableread-writemandatoryTelnet access permission
1.3.6.1.5.1.1.6ColumnsecurityFrontPanelEnableread-writemandatoryFront Panel access permission
1.3.6.1.5.2TablesecurityUserTablenot-accessiblemandatoryA table used to define Users. Users can be created/modified or deleted, with the exception of the default Users which cannot be deleted.
1.3.6.1.5.2.1RowsecurityUserTableEntrynot-accessiblemandatory1. Creating a new user is done by using the username as a qualifier and SETting any of the items in the row - defaults will be used for the remaining values. 2…
1.3.6.1.5.2.1.1ColumnsecurityUserStatusread-writemandatoryUser Status. `invalid' is used to indicate this user is no longer allowed to access this device, and the table entry may subsequently be re-used. Note that the…
1.3.6.1.5.2.1.2ColumnsecurityUserNameread-onlymandatoryAn ASCII string for the User Name. Empty strings are not allowed. The index column for the User Table.
1.3.6.1.5.2.1.3ColumnsecurityUserLevelread-writemandatoryUser Access Level defining the scope of management allowed for this user. Note that the access level of default Users cannot be changed.
1.3.6.1.5.2.1.4ColumnsecurityUserPasswordwrite-onlymandatoryThe password required for user confirmation, when access is made via the local serial port, the front panel, or via Telnet.
1.3.6.1.5.2.1.5ColumnsecurityUserCommunityread-writemandatoryThe community string identifying this user, when access is made via the original community-based SNMP (RFC1157).
1.3.6.1.5.2.1.6ColumnsecurityUserLocPartyread-writemandatoryThe local party identity of this user, when access is made via secure SNMP.
1.3.6.1.5.2.1.7ColumnsecurityUserMgrPartyread-writemandatoryThe manager party identity for this user, when access is made via secure SNMP.
1.3.6.1.5.3TablesecurityAuditLogTablenot-accessiblemandatoryThe audit log is a circular table recording all updates to the managed database on the device. The log must be read regularly by a management device, to mainta…
1.3.6.1.5.3.1RowsecurityAuditLogEntrynot-accessiblemandatoryEach entry contains the time an update was made, by whom, the item referenced, the new value and the result of this request.
1.3.6.1.5.3.1.1ColumnsecurityAuditIndexread-onlymandatoryAudit Log Index. A monotonically increasing value to uniquely identify an entry in the audit log. This value wraps around (to 1) after reaching the maximum val…
1.3.6.1.5.3.1.2ColumnsecurityAuditTimeread-onlymandatoryThe time, in hundredths of a second since the last system restart, of the update request.
1.3.6.1.5.3.1.3ColumnsecurityAuditUserread-onlymandatoryThe name of the user making the request.
1.3.6.1.5.3.1.4ColumnsecurityAuditObjectread-onlymandatoryThe object identifier of the item being updated. This includes any qualifier for the item.
1.3.6.1.5.3.1.5ColumnsecurityAuditValueread-onlymandatoryThe new value for the item.
1.3.6.1.5.3.1.6ColumnsecurityAuditResultread-onlymandatoryThe result of the update request may indicate that it was applied successfully, that it failed (for one of a number of reasons) or that it is still in progress.
Type Definitions
NameSyntaxStatusDescription
DisplayStringOCTET STRING
PhysAddressOCTET STRING