LBHUB-RBLC-MIB
174 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1 | Nodemib-2 | |||
| 1.3.6.1.2.1.1 | Nodesystem | |||
| 1.3.6.1.2.1.2 | Nodeinterfaces | |||
| 1.3.6.1.2.1.3 | Nodeat | |||
| 1.3.6.1.2.1.4 | Nodeip | |||
| 1.3.6.1.2.1.5 | Nodeicmp | |||
| 1.3.6.1.2.1.6 | Nodetcp | |||
| 1.3.6.1.2.1.7 | Nodeudp | |||
| 1.3.6.1.4.1.170 | Nodebicctech | |||
| 1.3.6.1.4.1.170.1 | Nodebdn | |||
| 1.3.6.1.4.1.170.1.1 | NodebdnII | |||
| 1.3.6.1.4.1.170.1.1.3 | NodespiderII | |||
| 1.3.6.1.4.1.170.1.1.3.1 | NodespProduct | |||
| 1.3.6.1.4.1.170.1.1.3.1.1 | Nodebridge | |||
| 1.3.6.1.4.1.170.1.1.3.1.1.1 | NodebridgeID | |||
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3 | Noder285 | |||
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1 | Noder285FilterDbase | |||
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.1 | ScalarbroadcastFltr | read-write | mandatory | The state of broadcast filtering. If this object is set to ON then the bridge will not forward frames with the ethernet broadcast address. The bridge itself wi… |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.2 | ScalaraccessGroupChecking | read-write | mandatory | The state of Access Group Checking. If this object is ON, then each frame is subject to Access Group Checking. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.3 | ScalaraccessGroupLearning | read-write | mandatory | This object determines whether learned addresses belong to the Non Access Group or the Free Access Group. It is only valid when accessGroupChecking is set to O… |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4 | NodeaccessGroupDbase | |||
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.1 | ScalaraccessGroupTableMaxEntries | read-only | mandatory | The maximum number of entries in the table accessGroupTable. In the RBLC this value is 2500. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.2 | ScalaraccessGroupTableCurEntries | read-only | mandatory | The current number of entries in the table accessGroupTable. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3 | TableaccessGroupTable | not-accessible | mandatory | A list of Access Group Entries. The number is given by accessGroupTableCurEntries. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1 | RowaccessGroupEntry | not-accessible | mandatory | An Access Group Entry. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.1 | ColumnaccessGroupAddr | read-write | mandatory | The MAC address of this entry. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.2 | ColumnaccessGroupInUse | read-write | mandatory | This object is ON for valid entries. The entry may be removed by setting this object to OFF. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.3 | ColumnaccessGroupNon | read-write | mandatory | Dictates if this MAC address shall belong to the Non-Access group.Membership of this group is mutually exclusive from all other groups. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.4 | ColumnaccessGroupFree | read-write | mandatory | Dictates if this MAC address shall belong to the Free Access Group. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.5 | ColumnaccessGroupMgmt | read-write | mandatory | Dictates if this MAC address shall belong to the Management group.Membership of this group is mutually exclusive from all other groups. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.6 | ColumnaccessGroupN1 | read-write | mandatory | Dictates if this MAC address shall belong to Named Access Group 1. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.7 | ColumnaccessGroupN2 | read-write | mandatory | Dictates if this MAC address shall belong to Named Access Group 2. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.8 | ColumnaccessGroupN3 | read-write | mandatory | Dictates if this MAC address shall belong to Named Access Group 3. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.9 | ColumnaccessGroupN4 | read-write | mandatory | Dictates if this MAC address shall belong to Named Access Group 4. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.10 | ColumnaccessGroupN5 | read-write | mandatory | Dictates if this MAC address shall belong to Named Access Group 5. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.11 | ColumnaccessGroupN6 | read-write | mandatory | Dictates if this MAC address shall belong to Named Access Group 6. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.12 | ColumnaccessGroupN7 | read-write | mandatory | Dictates if this MAC address shall belong to Named Access Group 7. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.13 | ColumnaccessGroupN8 | read-write | mandatory | Dictates if this MAC address shall belong to Named Access Group 8. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.14 | ColumnaccessGroupN9 | read-write | mandatory | Dictates if this MAC address shall belong to Named Access Group 9. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.15 | ColumnaccessGroupN10 | read-write | mandatory | Dictates if this MAC address shall belong to Named Access Group 10. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.16 | ColumnaccessGroupN11 | read-write | mandatory | Dictates if this MAC address shall belong to Named Access Group 11. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.17 | ColumnaccessGroupN12 | read-write | mandatory | Dictates if this MAC address shall belong to Named Access Group 12. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.18 | ColumnaccessGroupN13 | read-write | mandatory | Dictates if this MAC address shall belong to Named Access Group 13. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.19 | ColumnaccessGroupN14 | read-write | mandatory | Dictates if this MAC address shall belong to Named Access Group 14. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.20 | ColumnaccessGroupN15 | read-write | mandatory | Dictates if this MAC address shall belong to Named Access Group 15. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.21 | ColumnaccessGroupN16 | read-write | mandatory | Dictates if this MAC address shall belong to Named Access Group 16. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.22 | ColumnaccessGroupMembers | read-write | mandatory | This is a bitmap, giving membership of the sixteen named access groups in a single integer. Bit 0 corresponds to group N1, and bit 15 to group N16. Management … |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.4 | ScalaraccessGroupNamedIdMaxEntries | read-only | mandatory | The number Named Access Groups. In the RBLC this object has the value 16. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.5 | TableaccessGroupNamedIdTable | not-accessible | mandatory | A list of Named Access Group identifiers. The number is given by accessGroupNamedIdMaxEntries. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.5.1 | RowaccessGroupNamedIdEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.5.1.1 | ColumnaccessGroupNamedIdIndex | read-only | mandatory | A unique value for each Named Access Group. Its value ranges between 1 and the value of accessGroupNamedNumber. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.5.1.2 | ColumnaccessGroupNamedIdIdentifier | read-write | mandatory | A textual identifier for this Named Access Group. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6 | NodepcolFltr | |||
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.1 | ScalarpcolOperation | read-write | mandatory | The logical operation of the individual protocol filters. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.2 | ScalarpcolNumber | read-only | mandatory | The number of individual protocol filters. For the RBLC this value will be 8. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3 | TablepcolTable | not-accessible | mandatory | A list of protocol filter entries. The number is given by pcolNumber. This size is fixed. No gaps are allowed in the table. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3.1 | RowpcolEntry | not-accessible | mandatory | A protocol filter entry. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3.1.1 | ColumnpcolIndex | read-only | mandatory | A unique value for each protocol filter. Its value ranges between 1 and the value of pcolNumber. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3.1.2 | ColumnpcolInUse | read-write | mandatory | This object controls the appearance of valid protocol filter table entries, i.e. entries which contain a meaningful filter. Setting this field to 'notinuse' ca… |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3.1.3 | ColumnpcolState | read-write | mandatory | This object is ON if the protocol filter in this entry is being used to filter frames. This object is only meaningful if pcolInUse is set to 'inuse'. This prot… |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3.1.4 | ColumnpcolIdentifier | read-write | mandatory | A string used to identify this protocol filter. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3.1.5 | ColumnpcolOffset | read-write | mandatory | Offset within the frame of the 4-byte field on which filtering is to be performed. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3.1.6 | ColumnpcolMask | read-write | mandatory | This object is ANDed with the 4-byte field in the frame. The result is compared with pcolMatch. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3.1.7 | ColumnpcolMatch | read-write | mandatory | This object is compared with the result of ANDing pcolMask with the 4-byte field. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3.1.8 | ColumnpcolDecision | read-write | mandatory | Determines whether the comparison of pcolMatch and the masked data field will cause the action specified in pcolAction to be taken on a match, or not. |
| 1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3.1.9 | ColumnpcolAction | read-write | mandatory | The action specified for this individual protocol filter. |
| 1.3.6.1.4.1.170.1.1.3.1.1.2 | NodebridgeData | |||
| 1.3.6.1.4.1.170.1.1.3.1.1.2.1 | NodebridgeMgmt | |||
| 1.3.6.1.4.1.170.1.1.3.1.1.2.1.1 | ScalarbrgMgmtMyName | read-write | mandatory | The name associated with this bridge for the purpose of remote management. It is this name which shall be used within multicast name PDU's |
| 1.3.6.1.4.1.170.1.1.3.1.1.2.1.2 | ScalarbrgMgmtHelloTime | read-only | mandatory | The time interval, in seconds, between the transmission of successive bridge management hello packets |
| 1.3.6.1.4.1.170.1.1.3.1.1.2.1.3 | ScalarbrgMgmtManagerAddr | read-only | mandatory | The IP Address of the remote station currently managing the bridge. This remote station can be another bridge, or any device supporting Telnet. Note, that this… |
| 1.3.6.1.4.1.170.1.1.3.1.1.2.1.4 | ScalarbrgMgmtTableMaxEntries | read-only | mandatory | The maximum size of the Bridge Name Table. |
| 1.3.6.1.4.1.170.1.1.3.1.1.2.1.5 | ScalarbrgMgmtTableCurEntries | read-only | mandatory | The current number of known remote bridges in the Bridge Name Table. |
| 1.3.6.1.4.1.170.1.1.3.1.1.2.1.6 | TablebrgMgmtTable | not-accessible | mandatory | The table of known remote bridges which can be managed by this bridge. |
| 1.3.6.1.4.1.170.1.1.3.1.1.2.1.6.1 | RowbrgMgmtEntry | not-accessible | mandatory | An entry in the Remote Bridge Table. |
| 1.3.6.1.4.1.170.1.1.3.1.1.2.1.6.1.1 | ColumnbrgMgmtAddr | read-only | mandatory | The IP address of a remote bridge |
| 1.3.6.1.4.1.170.1.1.3.1.1.2.1.6.1.2 | ColumnbrgMgmtName | read-only | mandatory | The name of the bridge to use when trying to remotely administer it. |
| 1.3.6.1.4.1.170.1.1.3.1.1.2.2 | NodefilterDataBase | |||
| 1.3.6.1.4.1.170.1.1.3.1.1.2.2.1 | NodedynDBase | |||
| 1.3.6.1.4.1.170.1.1.3.1.1.2.2.1.1 | ScalardynType | read-only | mandatory | This object specifies how the dynamic filtering is implemented. |
| 1.3.6.1.4.1.170.1.1.3.1.1.2.2.1.2 | ScalardynTableMaxEntries | read-only | mandatory | The maximum number of entries in the dynamic filter table. |
| 1.3.6.1.4.1.170.1.1.3.1.1.2.2.1.3 | ScalardynTableCurEntries | read-only | mandatory | The current number of entries in the dynamic filter table. |
| 1.3.6.1.4.1.170.1.1.3.1.1.2.2.1.4 | TabledynTable | not-accessible | mandatory | The dynamic filter table |
| 1.3.6.1.4.1.170.1.1.3.1.1.2.2.1.4.1 | RowdynEntry | not-accessible | mandatory | A dynamic table entry. |
| 1.3.6.1.4.1.170.1.1.3.1.1.2.2.1.4.1.1 | ColumndynAddr | read-only | mandatory | The dynamically learned MAC source address. |
| 1.3.6.1.4.1.170.1.1.3.1.1.2.2.1.4.1.2 | ColumndynHomePort | read-only | mandatory | The port number, sptreePortIndex, on which the dynamic source address was received. |
| 1.3.6.1.4.1.170.1.1.3.1.1.2.2.1.4.1.3 | ColumndynInUse | read-write | mandatory | This object is INUSE for valid dynamic table entries. Entries may be removed by setting it to NOTINUSE. |
| 1.3.6.1.4.1.170.1.1.3.1.1.2.2.5 | NodetypeFltr | |||
| 1.3.6.1.4.1.170.1.1.3.1.1.2.2.5.1 | ScalartypeFltrStt | read-write | mandatory | State of type filtering. |
| 1.3.6.1.4.1.170.1.1.3.1.1.2.2.5.2 | ScalartypeFltrMaxEntries | read-only | mandatory | The maximum number of entries allowed in the static type filter table. |
| 1.3.6.1.4.1.170.1.1.3.1.1.2.2.5.3 | ScalartypeFltrCurEntries | read-only | mandatory | The current number of entries in the static type filter table. |
| 1.3.6.1.4.1.170.1.1.3.1.1.2.2.5.4 | TabletypeFltrTable | not-accessible | mandatory | Static type filter table. |
| 1.3.6.1.4.1.170.1.1.3.1.1.2.2.5.4.1 | RowtypeFltrEntry | not-accessible | mandatory | An entry in the static type filter table. |
| 1.3.6.1.4.1.170.1.1.3.1.1.2.2.5.4.1.1 | ColumntypeFltrFrom | read-write | mandatory | Type filter table 'from' type (inclusive). |
| 1.3.6.1.4.1.170.1.1.3.1.1.2.2.5.4.1.2 | ColumntypeFltrTo | read-write | mandatory | Type filter table 'to' type (inclusive). |
| 1.3.6.1.4.1.170.1.1.3.1.1.2.2.5.4.1.3 | ColumntypeFltrInUse | read-write | mandatory | Entries are removed by setting this object to NOTINUSE. |
| 1.3.6.1.4.1.170.1.1.3.1.1.2.3 | NodebridgeRestart | |||
| 1.3.6.1.4.1.170.1.1.3.1.1.2.3.1 | ScalarbridgeBootCount | read-only | mandatory | The number of times this system has been auto-booted. (This refers to auto-reboots only.) |
| 1.3.6.1.4.1.170.1.1.3.1.1.2.3.2 | ScalarbridgeRestartCause1 | read-only | mandatory | A code for a system error that causes a self-initiated restart. These codes are ordered from the earliest to the latest ie bridgeRestartCause1 is the earliest,… |
| 1.3.6.1.4.1.170.1.1.3.1.1.2.3.3 | ScalarbridgeRestartCause2 | read-only | mandatory | A code for a system error that causes a self-initiated restart. These codes are ordered from the earliest to the latest ie bridgeRestartCause1 is the earliest,… |
| 1.3.6.1.4.1.170.1.1.3.1.1.2.3.4 | ScalarbridgeRestartCause3 | read-only | mandatory | A code for a system error that causes a self-initiated restart. These codes are ordered from the earliest to the latest ie bridgeRestartCause1 is the earliest,… |
| 1.3.6.1.4.1.170.1.1.3.1.1.2.3.5 | ScalarbridgeRestartCause4 | read-only | mandatory | A code for a system error that causes a self-initiated restart. These codes are ordered from the earliest to the latest ie bridgeRestartCause1 is the earliest,… |
| 1.3.6.1.4.1.170.1.1.3.2 | NodespIndex | |||
| 1.3.6.1.4.1.170.1.1.3.2.1 | ScalarsupportedMaxEntries | read-only | mandatory | Number of entries in the supported table. |
| 1.3.6.1.4.1.170.1.1.3.2.2 | TablesupportedTable | not-accessible | mandatory | A table of OBJECT IDENTIFIERs, pointing to MIB groups which are supported in this agent. |
| 1.3.6.1.4.1.170.1.1.3.2.2.1 | RowsupportedEntry | not-accessible | mandatory | The OBJECT IDENTIFIER for a portion of the MIB, showing which parts of the MIB are implemented by the product. |
| 1.3.6.1.4.1.170.1.1.3.2.2.1.1 | ColumnsupportedIndex | read-only | mandatory | A simple numeric index into the supported table, to assist with indexing. |
| 1.3.6.1.4.1.170.1.1.3.2.2.1.2 | ColumnsupportedID | read-only | mandatory | A pointer to a supported MIB sub-tree |
| 1.3.6.1.4.1.170.1.1.3.2.3 | ScalarunSupportedMaxEntries | read-only | mandatory | Number of entries in the unsupported table. |
| 1.3.6.1.4.1.170.1.1.3.2.4 | TableunSupportedTable | not-accessible | mandatory | A table of OBJECT IDENTIFIERs, pointing to MIB groups, tables OR variables which are NOT supported in this agent. The unsupported OBJECT IDENTIFIERs are always… |
| 1.3.6.1.4.1.170.1.1.3.2.4.1 | RowunSupportedEntry | not-accessible | mandatory | The OBJECT IDENTIFIER for a portion of the MIB, showing which parts of the supported MIB are not implemented by the product. |
| 1.3.6.1.4.1.170.1.1.3.2.4.1.1 | ColumnunSupportedIndex | read-only | mandatory | A simple numeric index into the unsupported table, to assist with indexing. |
| 1.3.6.1.4.1.170.1.1.3.2.4.1.2 | ColumnunSupportedID | read-only | mandatory | A pointer to an unsupported sub-tree of a supported MIB sub-tree |
| 1.3.6.1.4.1.170.1.1.3.3 | NodespGeneral | |||
| 1.3.6.1.4.1.170.1.1.3.3.1 | ScalarmibVersion | read-only | mandatory | This is an object which is unique to a particular MIB in a particular product. It is read by the SpiderManager and is broken down into the following structure:… |
| 1.3.6.1.4.1.170.1.1.3.3.2 | Nodeadmin | |||
| 1.3.6.1.4.1.170.1.1.3.3.2.1 | ScalaradmSessionStt | read-only | mandatory | The state of the management session on the product. Management sessions can only be invoked if the value of this object is noManagementSession(1). Traps may be… |
| 1.3.6.1.4.1.170.1.1.3.3.2.2 | ScalaradmManagerAddr | read-only | mandatory | The IP address of the product initiating an SNMP or Telnet management session. This object is 0.0.0.0 when no management session is underway, and is set to thi… |
| 1.3.6.1.4.1.170.1.1.3.3.2.3 | ScalaradmLockDevice | read-write | mandatory | The host sets this variable to prevent other hosts from being able to use SNMP SET requests. This is intended for use when a host needs to carry out a series o… |
| 1.3.6.1.4.1.170.1.1.3.3.2.4 | ScalaradmOverrideDevice | read-write | mandatory | The host sets this variable to override the current lock owner. This has the effect of zeroing the 'admLockDevice' and 'admManagerAddr' variables, and cancelli… |
| 1.3.6.1.4.1.170.1.1.3.3.2.5 | ScalaradmPrompt | read-write | mandatory | The string used for the command line prompt in a local or remote administration session. |
| 1.3.6.1.4.1.170.1.1.3.3.2.6 | ScalaradmPassword | read-write | mandatory | The password required to start a management session to the administration mode of the product. It is intended that this be encrypted by a simple algorithm befo… |
| 1.3.6.1.4.1.170.1.1.3.3.2.7 | ScalaradmSignOnMsg | read-write | mandatory | The sign on message presented at the start of a local or remote administration session. This is typically the product type, name and version. |
| 1.3.6.1.4.1.170.1.1.3.3.2.8 | ScalaradmMgmtSessionTime | read-only | mandatory | The timeout used for management session closure. If a management session is idle for this time it will close automatically and no configuration change will be … |
| 1.3.6.1.4.1.170.1.1.3.3.2.9 | ScalaradmLastWriteAddr | read-only | mandatory | The IP address of the source of the last received SNMP SET request. |
| 1.3.6.1.4.1.170.1.1.3.3.2.10 | ScalaradmRemManagerAddr | read-only | mandatory | The address of the product initiating a management session corresponding to admSessionStt. This object is of zero length when no management session is underway… |
| 1.3.6.1.4.1.170.1.1.3.3.4 | Noderesources | |||
| 1.3.6.1.4.1.170.1.1.3.3.4.3 | ScalarresSmartGatewayAddr | read-write | mandatory | The IP address of the default gateway for the product. A value of 0.0.0.0 is used if there is no default gateway. |
| 1.3.6.1.4.1.170.1.1.3.3.5 | Noderestart | |||
| 1.3.6.1.4.1.170.1.1.3.3.5.1 | ScalarrstDoBoot | read-write | mandatory | When set to doBoot(1) the product should send the getResponse message using the parameters rstBootFrom and rstBootfilename(if applicable), and then reboot. Rea… |
| 1.3.6.1.4.1.170.1.1.3.3.5.4 | ScalarrstDoRestart | read-write | mandatory | When set to doRestart(1) the product should restart after sending the getResponse message. Reading this object always returns a value of noMeaning(2). |
| 1.3.6.1.4.1.170.1.1.3.3.5.5 | ScalarrstNeedRestart | read-only | mandatory | If the value of this object is needRestart(2) some configuration parameters have been changed which will not take effect until the product is restarted using r… |
| 1.3.6.1.4.1.170.1.1.3.3.5.6 | ScalarrstDownLoadStt | read-write | mandatory | If the value of this object is downLoading(2) a configuration download is in progress. The following rules apply: If a management session closes normally and r… |
| 1.3.6.1.4.1.170.1.1.3.3.5.7 | ScalarrstNumberRestarts | read-only | mandatory | A count of the number of restarts (this includes reboots) the product has undergone. |
| 1.3.6.1.4.1.170.1.1.3.3.5.8 | ScalarrstLastConfigChngTime | read-only | mandatory | The time at which the configuration of the agent was last changed. A configuration change is considered to have been made when non-volatile memory is updated a… |
| 1.3.6.1.4.1.170.1.1.3.4 | NodespSnmp | |||
| 1.3.6.1.4.1.170.1.1.3.4.1 | NodetrapCount | |||
| 1.3.6.1.4.1.170.1.1.3.4.1.1 | ScalartrapCountClear | read-write | mandatory | When set to clearCounts(1) the count of all traps in the trapCountTable is reset to zero. Reading this object always returns a value of noMeaning(2). |
| 1.3.6.1.4.1.170.1.1.3.4.1.2 | ScalartrapCountMaxEntries | read-only | mandatory | The maximum number of entries allowed in the trapCountTable. The actual number is the total of all of the types of generic and enterprise traps that the device… |
| 1.3.6.1.4.1.170.1.1.3.4.1.3 | TabletrapCountTable | not-accessible | mandatory | A list of the numbers of traps of each type sent. |
| 1.3.6.1.4.1.170.1.1.3.4.1.3.1 | RowtrapCountEntry | not-accessible | mandatory | An entry of trap counts for a particular trap type. |
| 1.3.6.1.4.1.170.1.1.3.4.1.3.1.1 | ColumntrapCountIndex | read-only | mandatory | A numeric index used to index the trapCountTable. Its value ranges between 1 and the value of trapCountMaxEntries. |
| 1.3.6.1.4.1.170.1.1.3.4.1.3.1.2 | ColumntrapCountType | read-only | mandatory | The type of trap, generic or enterprise. |
| 1.3.6.1.4.1.170.1.1.3.4.1.3.1.3 | ColumntrapCountCode | read-only | mandatory | The enumerated code for the trap, generic as specified in [3] or enterprise as specified in the management information document associated with the product. |
| 1.3.6.1.4.1.170.1.1.3.4.1.3.1.4 | ColumntrapCountEnable | read-write | mandatory | When the value is enableTrap(1) traps of this type are forwarded to all stations in the trapDestsTable, counted in the trapCountTable and stored in the allTrap… |
| 1.3.6.1.4.1.170.1.1.3.4.1.3.1.5 | ColumntrapCountCount | read-only | mandatory | A count of the number of traps sent of each type since the last reset of the product. |
| 1.3.6.1.4.1.170.1.1.3.4.1.3.1.6 | ColumntrapCountTime | read-only | mandatory | The time of the last occurrence of a particular trap type since the last reset of the product in one hundredths of a second. |
| 1.3.6.1.4.1.170.1.1.3.4.1.3.1.7 | ColumntrapCountDescr | read-only | mandatory | A description of the type of enterprise trap being transmitted. |
| 1.3.6.1.4.1.170.1.1.3.4.3 | NodetrapDests | |||
| 1.3.6.1.4.1.170.1.1.3.4.3.1 | ScalartrapDestsCheckAddr | read-write | mandatory | The trapDestsCheckAddr object selects whether the IP address of a station requesting a management session is validated for presence in the trapDests table. If … |
| 1.3.6.1.4.1.170.1.1.3.4.3.2 | ScalartrapDestsMaxEntries | read-only | mandatory | The maximum number of entries in the trapDestsTable. |
| 1.3.6.1.4.1.170.1.1.3.4.3.3 | ScalartrapDestsCurEntries | read-only | mandatory | The number of traps in the trapDestsTable at any instant. |
| 1.3.6.1.4.1.170.1.1.3.4.3.4 | TabletrapDestsTable | not-accessible | mandatory | A list of the destinations to which traps are sent. |
| 1.3.6.1.4.1.170.1.1.3.4.3.4.1 | RowtrapDestsEntry | not-accessible | mandatory | An entry for a station address to which traps are sent |
| 1.3.6.1.4.1.170.1.1.3.4.3.4.1.1 | ColumntrapDestsIpAddr | read-write | mandatory | The IP address of a station to which traps are sent. |
| 1.3.6.1.4.1.170.1.1.3.4.3.4.1.2 | ColumntrapDestsSerialAddr | read-write | mandatory | The serial IP address of a station to which traps are sent. |
| 1.3.6.1.4.1.170.1.1.3.4.3.4.1.3 | ColumntrapDestsPhoneNumber | read-write | mandatory | The telephone number of a modem connected to the product which can be dialed up to send traps. |
| 1.3.6.1.4.1.170.1.1.3.4.3.4.1.4 | ColumntrapDestsSendTo | read-write | mandatory | The interface to send traps to. This selects whether to send traps via the primary medium or the serial line. |
| 1.3.6.1.4.1.170.1.1.3.4.3.4.1.5 | ColumntrapDestsEnable | read-write | mandatory | When the value is sendTraps(1) traps are sent to this address and are counted in the trapCountTable and entered in the allTrapTable. When the value is dontSend… |
| 1.3.6.1.4.1.170.1.1.3.4.3.4.1.6 | ColumntrapDestsCommunityName | read-write | mandatory | The community name to use when sending traps to this address. |
| 1.3.6.1.4.1.170.1.1.3.4.3.4.1.7 | ColumntrapDestsInUse | read-write | mandatory | Whether this entry is in use or not. This field is used to delete entries from this table. |
| 1.3.6.1.4.1.170.1.1.3.6 | NodespProtocols | |||
| 1.3.6.1.4.1.170.1.1.3.6.14 | Nodespantree | |||
| 1.3.6.1.4.1.170.1.1.3.6.14.15 | ScalarsptreeGroupAddr | read-only | mandatory | The multicast address used by BPDUs. |
| 1.3.6.1.4.1.170.1.1.3.6.14.16 | ScalarsptreeStt | read-write | mandatory | The Spanning Tree State of the bridge. |
| 1.3.6.1.4.1.170.1.1.3.6.14.17 | ScalarsptreeInit | read-write | mandatory | When set to INITIALISE the parameters and timers of the Spanning Tree algorithm and protocol are initialised. |
| 1.3.6.1.4.1.170.1.1.3.6.16 | NodespIp | |||
| 1.3.6.1.4.1.170.1.1.3.6.16.1 | ScalarsipNxtBootTableMaxEntries | read-only | mandatory | The maximum number of entries allowed in the NxtBootTable. |
| 1.3.6.1.4.1.170.1.1.3.6.16.2 | TablesipNxtBootTable | not-accessible | mandatory | A table of IP interfaces, used to change the IP address, subnet mask and broadcast address, the next time the system is booted. The table indexed by the curren… |
| 1.3.6.1.4.1.170.1.1.3.6.16.2.1 | RowsipNxtBootEntry | not-accessible | mandatory | This table entry consists of the current IP address of this interface, followed by the new IP address, broadcast form and subnet masks. These will not take eff… |
| 1.3.6.1.4.1.170.1.1.3.6.16.2.1.1 | ColumnsipNxtBootCurIp | read-only | mandatory | This is the current IP address of the interface. |
| 1.3.6.1.4.1.170.1.1.3.6.16.2.1.2 | ColumnsipNxtBootNxtIp | read-write | mandatory | The desired IP address of this interface, once the system is rebooted. The subnetmask will be changed accordingly, to cover the default mask for that IP addres… |
| 1.3.6.1.4.1.170.1.1.3.6.16.2.1.3 | ColumnsipNxtBootBbdCast | read-write | mandatory | Sets the broadcast address to be all ones, or all zeroes. |
| 1.3.6.1.4.1.170.1.1.3.6.16.2.1.4 | ColumnsipNxtBootSubnetMask | read-write | mandatory | The subnet mask associated with the IP address entry. If sipNxtBootNxtIp is specified, then the subnet mask automatically changes to the default mask for the n… |