MIB Viewer

LBHUB-REPEATER-MIB

184 objects
No module-level DESCRIPTION found.
Imported Objects
RFC-1212OBJECT-TYPE
RFC-1215TRAP-TYPE
RFC1155-SMICounter enterprises Gauge IpAddress mgmt NetworkAddress TimeTicks
RFC1213-MIBDisplayString PhysAddress
OIDNameAccessStatusDescription
0.0ScalarrpMauTyperead-onlymandatory
0.0NodeunknownMauType
1.3.6.1.2.1Nodemib-2
1.3.6.1.2.1.1Nodesystem
1.3.6.1.2.1.2Nodeinterfaces
1.3.6.1.2.1.3Nodeat
1.3.6.1.2.1.4Nodeip
1.3.6.1.2.1.5Nodeicmp
1.3.6.1.2.1.6Nodetcp
1.3.6.1.2.1.7Nodeudp
1.3.6.1.2.1.8Nodeegp
1.3.6.1.2.1.10Nodetransmission
1.3.6.1.2.1.11Nodesnmp
1.3.6.1.2.1.17Nodedot1dBridge
1.3.6.1.2.1.22NodesnmpDot3RptrMgt
1.3.6.1.2.1.22.1NoderptrBasicPackage
1.3.6.1.2.1.22.1.1NoderptrRptrInfo
1.3.6.1.2.1.22.1.1.1ScalarrptrGroupCapacityread-onlymandatoryThe rptrGroupCapacity is the number of groups that can be contained within the repeater. Within each managed repeater, the groups are uniquely numbered in the …
1.3.6.1.2.1.22.1.1.2ScalarrptrOperSTATUSread-onlymandatoryThe rptrOperSTATUS object indicates the operational state of the repeater. The rptrHealthText object may be consulted for more specific information about the s…
1.3.6.1.2.1.22.1.1.3ScalarrptrHealthTextread-onlymandatoryThe health text object is a text string that provides information relevant to the operational state of the repeater. Agents may use this string to provide deta…
1.3.6.1.2.1.22.1.1.4ScalarrptrResetread-writemandatorySetting this object to reset(2) causes a transition to the START state of Fig 9-2 in section 9 [IEEE 802.3 Std]. Setting this object to noReset(1) has no effec…
1.3.6.1.2.1.22.1.1.5ScalarrptrNonDisruptTestread-writemandatorySetting this object to selfTest(2) causes the repeater to perform a agent-specific, non- disruptive self-test that has the following characteristics: a) The na…
1.3.6.1.2.1.22.1.1.6ScalarrptrTotalPartitionedPortsread-onlymandatoryThis object returns the total number of ports in the repeater whose current state meets all three of the following criteria: rptrPortOperSTATUS does not have t…
1.3.6.1.2.1.22.1.2NoderptrGroupInfo
1.3.6.1.2.1.22.1.2.1TablerptrGroupTablenot-accessiblemandatoryTable of descriptive and STATUS information about the groups of ports.
1.3.6.1.2.1.22.1.2.1.1RowrptrGroupEntrynot-accessiblemandatoryAn entry in the table, containing information about a single group of ports.
1.3.6.1.2.1.22.1.2.1.1.1ColumnrptrGroupIndexread-onlymandatoryThis object identifies the group within the repeater for which this entry contains information. This value is never greater than rptrGroupCapacity.
1.3.6.1.2.1.22.1.2.1.1.2ColumnrptrGroupDescrread-onlymandatoryA textual description of the group. This value should include the full name and version identification of the group's hardware type and indicate how the group …
1.3.6.1.2.1.22.1.2.1.1.3ColumnrptrGroupObjectIDread-onlymandatoryThe vendor's authoritative identification of the group. This value may be allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straight-fo…
1.3.6.1.2.1.22.1.2.1.1.4ColumnrptrGroupOperSTATUSread-onlymandatoryAn object that indicates the operational STATUS of the group. A STATUS of notPresent(4) indicates that the group is temporarily or permanently physically and/o…
1.3.6.1.2.1.22.1.2.1.1.5ColumnrptrGroupLastOperSTATUSChangeread-onlymandatoryAn object that contains the value of sysUpTime at the time that the value of the rptrGroupOperSTATUS object for this group last changed. A value of zero indica…
1.3.6.1.2.1.22.1.2.1.1.6ColumnrptrGroupPortCapacityread-onlymandatoryThe rptrGroupPortCapacity is the number of ports that can be contained within the group. Valid range is 1-1024. Within each group, the ports are uniquely numbe…
1.3.6.1.2.1.22.1.3NoderptrPortInfo
1.3.6.1.2.1.22.1.3.1TablerptrPortTablenot-accessiblemandatoryTable of descriptive and STATUS information about the ports.
1.3.6.1.2.1.22.1.3.1.1RowrptrPortEntrynot-accessiblemandatoryAn entry in the table, containing information about a single port.
1.3.6.1.2.1.22.1.3.1.1.1ColumnrptrPortGroupIndexread-onlymandatoryThis object identifies the group containing the port for which this entry contains information.
1.3.6.1.2.1.22.1.3.1.1.2ColumnrptrPortIndexread-onlymandatoryThis object identifies the port within the group for which this entry contains information. This value can never be greater than rptrGroupPortCapacity for the …
1.3.6.1.2.1.22.1.3.1.1.3ColumnrptrPortAdminSTATUSread-writemandatorySetting this object to disabled(2) disables the port. A disabled port neither transmits nor receives. Once disabled, a port must be explicitly enabled to resto…
1.3.6.1.2.1.22.1.3.1.1.4ColumnrptrPortAutoPartitionStateread-onlymandatoryThe autoPartitionState flag indicates whether the port is currently partitioned by the repeater's auto-partition protection. The conditions that cause port par…
1.3.6.1.2.1.22.1.3.1.1.5ColumnrptrPortOperSTATUSread-onlymandatoryThis object indicates the port's operational STATUS. The notPresent(3) status indicates the port is physically removed (note this may or may not be possible de…
1.3.6.1.2.1.22.2NoderptrMonitorPackage
1.3.6.1.2.1.22.2.1NoderptrMonitorRptrInfo
1.3.6.1.2.1.22.2.1.1ScalarrptrMonitorTransmitCollisionsread-onlymandatoryThis counter is incremented every time the repeater state machine enters the TRANSMIT COLLISION state from any state other than ONE PORT LEFT (Ref: Fig 9-2, IE…
1.3.6.1.2.1.22.2.2NoderptrMonitorGroupInfo
1.3.6.1.2.1.22.2.2.1TablerptrMonitorGroupTablenot-accessiblemandatoryTable of performance and error statistics for the groups.
1.3.6.1.2.1.22.2.2.1.1RowrptrMonitorGroupEntrynot-accessiblemandatoryAn entry in the table, containing total performance and error statistics for a single group. Regular retrieval of the information in this table provides a mean…
1.3.6.1.2.1.22.2.2.1.1.1ColumnrptrMonitorGroupIndexread-onlymandatoryThis object identifies the group within the repeater for which this entry contains information.
1.3.6.1.2.1.22.2.2.1.1.2ColumnrptrMonitorGroupTotalFramesread-onlymandatoryThe total number of frames of valid frame length that have been received on the ports in this group and for which the FCSError and CollisionEvent signals were …
1.3.6.1.2.1.22.2.2.1.1.3ColumnrptrMonitorGroupTotalOctetsread-onlymandatoryThe total number of octets contained in the valid frames that have been received on the ports in this group. This counter is the summation of the values of the…
1.3.6.1.2.1.22.2.2.1.1.4ColumnrptrMonitorGroupTotalErrorsread-onlymandatoryThe total number of errors which have occurred on all of the ports in this group. This counter is the summation of the values of the rptrMonitorPortTotalErrors…
1.3.6.1.2.1.22.2.3NoderptrMonitorPortInfo
1.3.6.1.2.1.22.2.3.1TablerptrMonitorPortTablenot-accessiblemandatoryTable of performance and error statistics for the ports.
1.3.6.1.2.1.22.2.3.1.1RowrptrMonitorPortEntrynot-accessiblemandatoryAn entry in the table, containing performance and error statistics for a single port.
1.3.6.1.2.1.22.2.3.1.1.1ColumnrptrMonitorPortGroupIndexread-onlymandatoryThis object identifies the group containing the port for which this entry contains information.
1.3.6.1.2.1.22.2.3.1.1.2ColumnrptrMonitorPortIndexread-onlymandatoryThis object identifies the port within the group for which this entry contains information.
1.3.6.1.2.1.22.2.3.1.1.3ColumnrptrMonitorPortReadableFramesread-onlymandatoryThis object is the number of frames of valid frame length that have been received on this port. This counter is incremented by one for each frame received on t…
1.3.6.1.2.1.22.2.3.1.1.4ColumnrptrMonitorPortReadableOctetsread-onlymandatoryThis object is the number of octets contained in valid frames that have been received on this port. This counter is incremented by OctetCount for each frame re…
1.3.6.1.2.1.22.2.3.1.1.5ColumnrptrMonitorPortFCSErrorsread-onlymandatoryThis counter is incremented by one for each frame received on this port with the FCSError signal asserted and the FramingError and CollisionEvent signals deass…
1.3.6.1.2.1.22.2.3.1.1.6ColumnrptrMonitorPortAlignmentErrorsread-onlymandatoryThis counter is incremented by one for each frame received on this port with the FCSError and FramingError signals asserted and CollisionEvent signal deasserte…
1.3.6.1.2.1.22.2.3.1.1.7ColumnrptrMonitorPortFrameTooLongsread-onlymandatoryThis counter is incremented by one for each frame received on this port whose OctetCount is greater than maxFrameSize (Ref: 4.4.2.1, IEEE 802.3 Std). If rptrMo…
1.3.6.1.2.1.22.2.3.1.1.8ColumnrptrMonitorPortShortEventsread-onlymandatoryThis counter is incremented by one for each CarrierEvent on this port with ActivityDuration less than ShortEventMaxTime. ShortEventMaxTime is greater than 74 b…
1.3.6.1.2.1.22.2.3.1.1.9ColumnrptrMonitorPortRuntsread-onlymandatoryThis counter is incremented by one for each CarrierEvent on this port that meets one of the following two conditions. Only one test need be made. a) The Activi…
1.3.6.1.2.1.22.2.3.1.1.10ColumnrptrMonitorPortCollisionsread-onlymandatoryThis counter is incremented by one for any CarrierEvent signal on any port for which the CollisionEvent signal on this port is also asserted. The approximate m…
1.3.6.1.2.1.22.2.3.1.1.11ColumnrptrMonitorPortLateEventsread-onlymandatoryThis counter is incremented by one for each CarrierEvent on this port in which the CollIn(X) variable transitions to the value SQE (Ref: 9.6.6.2, IEEE 802.3 St…
1.3.6.1.2.1.22.2.3.1.1.12ColumnrptrMonitorPortVeryLongEventsread-onlymandatoryThis counter is incremented by one for each CarrierEvent on this port whose ActivityDuration is greater than the MAU Jabber Lockup Protection timer TW3 (Ref: 9…
1.3.6.1.2.1.22.2.3.1.1.13ColumnrptrMonitorPortDataRateMismatchesread-onlymandatoryThis counter is incremented by one for each frame received on this port that meets all of the following conditions: a) The CollisionEvent signal is not asserte…
1.3.6.1.2.1.22.2.3.1.1.14ColumnrptrMonitorPortAutoPartitionsread-onlymandatoryThis counter is incremented by one for each time the repeater has automatically partitioned this port. The conditions that cause port partitioning are specifie…
1.3.6.1.2.1.22.2.3.1.1.15ColumnrptrMonitorPortTotalErrorsread-onlymandatoryThe total number of errors which have occurred on this port. This counter is the summation of the values of other error counters (for the same port), namely: r…
1.3.6.1.2.1.22.3NoderptrAddrTrackPackage
1.3.6.1.2.1.22.3.1NoderptrAddrTrackRptrInfo
1.3.6.1.2.1.22.3.2NoderptrAddrTrackGroupInfo
1.3.6.1.2.1.22.3.3NoderptrAddrTrackPortInfo
1.3.6.1.2.1.22.3.3.1TablerptrAddrTrackTablenot-accessiblemandatoryTable of address mapping information about the ports.
1.3.6.1.2.1.22.3.3.1.1RowrptrAddrTrackEntrynot-accessiblemandatoryAn entry in the table, containing address mapping information about a single port.
1.3.6.1.2.1.22.3.3.1.1.1ColumnrptrAddrTrackGroupIndexread-onlymandatoryThis object identifies the group containing the port for which this entry contains information.
1.3.6.1.2.1.22.3.3.1.1.2ColumnrptrAddrTrackPortIndexread-onlymandatoryThis object identifies the port within the group for which this entry contains information.
1.3.6.1.2.1.22.3.3.1.1.3ColumnrptrAddrTrackLastSourceAddressread-onlydeprecatedThis object is the SourceAddress of the last readable frame (i.e., counted by rptrMonitorPortReadableFrames) received by this port. This object has been deprec…
1.3.6.1.2.1.22.3.3.1.1.4ColumnrptrAddrTrackSourceAddrChangesread-onlymandatoryThis counter is incremented by one for each time that the rptrAddrTrackLastSourceAddress attribute for this port has changed. This may indicate whether a link …
1.3.6.1.2.1.22.3.3.1.1.5ColumnrptrAddrTrackNewLastSrcAddressread-onlymandatoryThis object is the SourceAddress of the last readable frame (i.e., counted by rptrMonitorPortReadableFrames) received by this port. If no frames have been rece…
1.3.6.1.2.1.26NodesnmpDot3MauMgt
1.3.6.1.2.1.26.1Nodedot3RpMauBasicGroup
1.3.6.1.2.1.26.1.1TablerpMauTablenot-accessiblemandatoryTable of descriptive and status information about the MAU(s) attached to the ports of a repeater.
1.3.6.1.2.1.26.1.1.1RowrpMauEntrynot-accessiblemandatoryAn entry in the table, containing information about a single MAU.
1.3.6.1.2.1.26.1.1.1.1ColumnrpMauGroupIndexread-onlymandatoryThis variable uniquely identifies the repeater group containing the port to which the MAU described by this entry is connected.
1.3.6.1.2.1.26.1.1.1.2ColumnrpMauPortIndexread-onlymandatoryThis variable uniquely identifies the repeater port within group rpMauGroupIndex to which the MAU described by this entry is connected.
1.3.6.1.2.1.26.1.1.1.3ColumnrpMauIndexread-onlymandatoryThis variable uniquely identifies the MAU connected to port rpMauPortIndex within group rpMauGroupIndex that is described by this entry.
1.3.6.1.2.1.26.1.1.1.5ColumnrpMauStatusread-writemandatoryThe current state of the MAU. This object may be implemented as a read-only object by those agents and MAUs that do not implement software control of the MAU s…
1.3.6.1.2.1.26.1.1.1.6ColumnrpMauMediaAvailableread-onlymandatoryIf the MAU is a link or fiber type (FOIRL, 10BASE-T, 10BASE-F) then this is equivalent to the link test fail state/low light function. For an AUI or a coax (in…
1.3.6.1.2.1.26.1.1.1.7ColumnrpMauMediaAvailableStateExitsread-onlymandatoryA count of the number of times that rpMauMediaAvailable for this MAU instance leaves the state available(3).
1.3.6.1.2.1.26.1.1.1.8ColumnrpMauJabberStateread-onlymandatoryThe value other(1) is returned if the jabber state is not 2, 3, or 4. The agent must always return other(1) for MAU type dot3MauTypeAUI. The value unknown(2) i…
1.3.6.1.2.1.26.1.1.1.9ColumnrpMauJabberingStateEntersread-onlymandatoryA count of the number of times that rpMauJabberState for this MAU instance enters the state jabbering(4). For a MAU of type dot3MauTypeAUI, this counter will a…
1.3.6.1.2.1.26.2Nodedot3IfMauBasicGroup
1.3.6.1.2.1.26.3Nodedot3BroadMauBasicGroup
1.3.6.1.2.1.26.4Nodedot3MauType
1.3.6.1.2.1.26.4.1Nodedot3MauTypeAUI
1.3.6.1.2.1.26.4.2Nodedot3MauType10Base5
1.3.6.1.2.1.26.4.3Nodedot3MauTypeFoirl
1.3.6.1.2.1.26.4.4Nodedot3MauType10Base2
1.3.6.1.2.1.26.4.5Nodedot3MauType10BaseT
1.3.6.1.2.1.26.4.6Nodedot3MauType10BaseFP
1.3.6.1.2.1.26.4.7Nodedot3MauType10BaseFB
1.3.6.1.2.1.26.4.8Nodedot3MauType10BaseFL
1.3.6.1.2.1.26.4.9Nodedot3MauType10Broad36
1.3.6.1.4.1.43Nodea3Com
1.3.6.1.4.1.43.1Nodeproducts
1.3.6.1.4.1.43.1.1NodeterminalServer
1.3.6.1.4.1.43.1.2NodededicatedBridgeServer
1.3.6.1.4.1.43.1.3NodededicatedRouteServer
1.3.6.1.4.1.43.1.4Nodebrouter
1.3.6.1.4.1.43.1.5NodegenericMSWorkstation
1.3.6.1.4.1.43.1.6NodegenericMSServer
1.3.6.1.4.1.43.1.7NodegenericUnixServer
1.3.6.1.4.1.43.1.8Nodehub
1.3.6.1.4.1.43.1.8.1NodelinkBuilder3GH
1.3.6.1.4.1.43.1.8.2NodelinkBuilder10BTi
1.3.6.1.4.1.43.1.8.3NodelinkBuilderECS
1.3.6.1.4.1.43.1.8.4NodelinkBuilderMSH
1.3.6.1.4.1.43.1.8.5NodelinkBuilderFMS
1.3.6.1.4.1.43.1.8.6NodelinkBuilderFDDIwg
1.3.6.1.4.1.43.1.8.7NodelinkBuilderFMSII
1.3.6.1.4.1.43.1.8.8NodelinkSwitchFMS
1.3.6.1.4.1.43.1.8.9NodelinkSwitchMSH
1.3.6.1.4.1.43.1.8.10NodelinkBuilderFMSLBridge
1.3.6.1.4.1.43.1.9Nodecards
1.3.6.1.4.1.43.1.9.1NodelinkBuilder3GH-cards
1.3.6.1.4.1.43.1.9.2NodelinkBuilder10BTi-cards
1.3.6.1.4.1.43.1.9.2.1NodelinkBuilder10BTi-cards-utp
1.3.6.1.4.1.43.1.9.2.2NodelinkBuilder10BT-cards-utp
1.3.6.1.4.1.43.1.9.3NodelinkBuilderECS-cards
1.3.6.1.4.1.43.1.9.4NodelinkBuilderMSH-cards
1.3.6.1.4.1.43.1.9.5NodelinkBuilderFMS-cards
1.3.6.1.4.1.43.1.9.5.1NodelinkBuilderFMS-cards-utp
1.3.6.1.4.1.43.1.9.5.2NodelinkBuilderFMS-cards-coax
1.3.6.1.4.1.43.1.9.5.3NodelinkBuilderFMS-cards-fiber
1.3.6.1.4.1.43.1.9.5.4NodelinkBuilderFMS-cards-12fiber
1.3.6.1.4.1.43.1.9.5.5NodelinkBuilderFMS-cards-24utp
1.3.6.1.4.1.43.1.9.6NodelinkBuilderFMSII-cards
1.3.6.1.4.1.43.1.9.6.1NodelinkBuilderFMSII-cards-12tp-rj45
1.3.6.1.4.1.43.1.9.6.2NodelinkBuilderFMSII-cards-10coax-bnc
1.3.6.1.4.1.43.1.9.6.3NodelinkBuilderFMSII-cards-6fiber-st
1.3.6.1.4.1.43.1.9.6.4NodelinkBuilderFMSII-cards-12fiber-st
1.3.6.1.4.1.43.1.9.6.5NodelinkBuilderFMSII-cards-24tp-rj45
1.3.6.1.4.1.43.1.9.6.6NodelinkBuilderFMSII-cards-24tp-telco
1.3.6.1.4.1.43.1.10Nodechipsets
1.3.6.1.4.1.43.3Nodeamp-mib
1.3.6.1.4.1.43.4NodegenericTrap
1.3.6.1.4.1.43.5NodeviewBuilderApps
1.3.6.1.4.1.43.6NodespecificTrap
1.3.6.1.4.1.43.7NodelinkBuilder3GH-mib
1.3.6.1.4.1.43.8NodelinkBuilder10BTi-mib
1.3.6.1.4.1.43.9NodelinkBuilderECS-mib
1.3.6.1.4.1.43.10Nodegeneric
1.3.6.1.4.1.43.10.1NodegenExperimental
1.3.6.1.4.1.43.10.1.1NodetestData
1.3.6.1.4.1.43.10.1.2NodeifExtensions
1.3.6.1.4.1.43.10.2Nodesetup
1.3.6.1.4.1.43.10.3NodesysLoader
1.3.6.1.4.1.43.10.4Nodesecurity
1.3.6.1.4.1.43.10.5Nodegauges
1.3.6.1.4.1.43.10.6NodeasciiAgent
1.3.6.1.4.1.43.10.7NodeserialIf
1.3.6.1.4.1.43.10.8NoderepeaterMgmt
1.3.6.1.4.1.43.10.9NodeendStation
1.3.6.1.4.1.43.10.10NodelocalSnmp
1.3.6.1.4.1.43.10.11Nodemanager
1.3.6.1.4.1.43.10.12NodeunusedGeneric12
1.3.6.1.4.1.43.10.14Nodechassis
1.3.6.1.4.1.43.10.15NodemrmResilience
1.3.6.1.4.1.43.10.16NodetokenRing
1.3.6.1.4.1.43.10.17NodemultiRepeater
1.3.6.1.4.1.43.10.18NodebridgeMgmt
1.3.6.1.4.1.43.10.19Nodefault
1.3.6.1.4.1.43.10.20Nodepoll
1.3.6.1.4.1.43.10.21NodepowerSupply
1.3.6.1.4.1.43.11NodenetBuilder-mib
1.3.6.1.4.1.43.12NodelBridgeECS-mib
1.3.6.1.4.1.43.13NodedeskMan-mib
1.3.6.1.4.1.43.14NodelinkBuilderMSH-mib
1.3.6.1.4.1.43.15NodelinkBuilderFMS-mib
1.3.6.1.4.1.43.16NodelinkBuilderFDDI-wghub-mib
1.3.6.1.4.1.43.17NodelinkSwitch-mib
Type Definitions
NameSyntaxStatusDescription
DisplayStringOCTET STRING
MacAddressOCTET STRING (SIZE(6))
PhysAddressOCTET STRING