LBMSH-MIB
700 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress mgmt NetworkAddress TimeTicks |
| RFC1213-MIB | DisplayString ifIndex PhysAddress snmp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1 | Nodemib-2 | |||
| 1.3.6.1.2.1.1 | Nodesystem | |||
| 1.3.6.1.2.1.1.1 | ScalarsysDescr | read-only | mandatory | A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-syste… |
| 1.3.6.1.2.1.1.2 | ScalarsysObjectID | read-only | mandatory | The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtr… |
| 1.3.6.1.2.1.1.3 | ScalarsysUpTime | read-only | mandatory | The time (in hundredths of a second) since the network management portion of the system was last re-initialized. |
| 1.3.6.1.2.1.1.4 | ScalarsysContact | read-write | mandatory | The textual identification of the contact person for this managed node, together with information on how to contact this person. |
| 1.3.6.1.2.1.1.5 | ScalarsysName | read-write | mandatory | An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. |
| 1.3.6.1.2.1.1.6 | ScalarsysLocation | read-write | mandatory | The physical location of this node (e.g., `telephone closet, 3rd floor'). |
| 1.3.6.1.2.1.1.7 | ScalarsysServices | read-only | mandatory | A value which indicates the set of services that this entity primarily offers. The value is a sum. This sum initially takes the value zero, Then, for each laye… |
| 1.3.6.1.2.1.2 | Nodeinterfaces | |||
| 1.3.6.1.2.1.2.1 | ScalarifNumber | read-only | mandatory | The number of network interfaces (regardless of their current state) present on this system. |
| 1.3.6.1.2.1.2.2 | TableifTable | not-accessible | mandatory | A list of interface entries. The number of entries is given by the value of ifNumber. |
| 1.3.6.1.2.1.2.2.1 | RowifEntry | not-accessible | mandatory | An interface entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.2.1.2.2.1.1 | ColumnifIndex | read-only | mandatory | A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re… |
| 1.3.6.1.2.1.2.2.1.2 | ColumnifDescr | read-only | mandatory | A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the h… |
| 1.3.6.1.2.1.2.2.1.3 | ColumnifType | read-only | mandatory | The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack. |
| 1.3.6.1.2.1.2.2.1.4 | ColumnifMtu | read-only | mandatory | The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagr… |
| 1.3.6.1.2.1.2.2.1.5 | ColumnifSpeed | read-only | mandatory | An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation ca… |
| 1.3.6.1.2.1.2.2.1.6 | ColumnifPhysAddress | read-only | mandatory | The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.… |
| 1.3.6.1.2.1.2.2.1.7 | ColumnifAdminStatus | read-write | mandatory | The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.2.1.2.2.1.8 | ColumnifOperStatus | read-only | mandatory | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.2.1.2.2.1.9 | ColumnifLastChange | read-only | mandatory | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization o… |
| 1.3.6.1.2.1.2.2.1.10 | ColumnifInOctets | read-only | mandatory | The total number of octets received on the interface, including framing characters. |
| 1.3.6.1.2.1.2.2.1.11 | ColumnifInUcastPkts | read-only | mandatory | The number of subnetwork-unicast packets delivered to a higher-layer protocol. |
| 1.3.6.1.2.1.2.2.1.12 | ColumnifInNUcastPkts | read-only | mandatory | The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. |
| 1.3.6.1.2.1.2.2.1.13 | ColumnifInDiscards | read-only | mandatory | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.2.1.2.2.1.14 | ColumnifInErrors | read-only | mandatory | The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
| 1.3.6.1.2.1.2.2.1.15 | ColumnifInUnknownProtos | read-only | mandatory | The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.2.1.2.2.1.16 | ColumnifOutOctets | read-only | mandatory | The total number of octets transmitted out of the interface, including framing characters. |
| 1.3.6.1.2.1.2.2.1.17 | ColumnifOutUcastPkts | read-only | mandatory | The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not se… |
| 1.3.6.1.2.1.2.2.1.18 | ColumnifOutNUcastPkts | read-only | mandatory | The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) addre… |
| 1.3.6.1.2.1.2.2.1.19 | ColumnifOutDiscards | read-only | mandatory | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.2.1.2.2.1.20 | ColumnifOutErrors | read-only | mandatory | The number of outbound packets that could not be transmitted because of errors. |
| 1.3.6.1.2.1.2.2.1.21 | ColumnifOutQLen | read-only | mandatory | The length of the output packet queue (in packets). |
| 1.3.6.1.2.1.2.2.1.22 | ColumnifSpecific | read-only | mandatory | A reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interface is realized by an ethernet, … |
| 1.3.6.1.2.1.3 | Nodeat | |||
| 1.3.6.1.2.1.4 | Nodeip | |||
| 1.3.6.1.2.1.4.1 | ScalaripForwarding | read-write | mandatory | The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP g… |
| 1.3.6.1.2.1.4.2 | ScalaripDefaultTTL | read-write | mandatory | The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the tra… |
| 1.3.6.1.2.1.4.3 | ScalaripInReceives | read-only | mandatory | The total number of input datagrams received from interfaces, including those received in error. |
| 1.3.6.1.2.1.4.4 | ScalaripInHdrErrors | read-only | mandatory | The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live … |
| 1.3.6.1.2.1.4.5 | ScalaripInAddrErrors | read-only | mandatory | The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. Th… |
| 1.3.6.1.2.1.4.6 | ScalaripForwDatagrams | read-only | mandatory | The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward the… |
| 1.3.6.1.2.1.4.7 | ScalaripInUnknownProtos | read-only | mandatory | The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.2.1.4.8 | ScalaripInDiscards | read-only | mandatory | The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buff… |
| 1.3.6.1.2.1.4.9 | ScalaripInDelivers | read-only | mandatory | The total number of input datagrams successfully delivered to IP user-protocols (including ICMP). |
| 1.3.6.1.2.1.4.10 | ScalaripOutRequests | read-only | mandatory | The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not in… |
| 1.3.6.1.2.1.4.11 | ScalaripOutDiscards | read-only | mandatory | The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for … |
| 1.3.6.1.2.1.4.12 | ScalaripOutNoRoutes | read-only | mandatory | The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted… |
| 1.3.6.1.2.1.4.13 | ScalaripReasmTimeout | read-only | mandatory | The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity. |
| 1.3.6.1.2.1.4.14 | ScalaripReasmReqds | read-only | mandatory | The number of IP fragments received which needed to be reassembled at this entity. |
| 1.3.6.1.2.1.4.15 | ScalaripReasmOKs | read-only | mandatory | The number of IP datagrams successfully re- assembled. |
| 1.3.6.1.2.1.4.16 | ScalaripReasmFails | read-only | mandatory | The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of di… |
| 1.3.6.1.2.1.4.17 | ScalaripFragOKs | read-only | mandatory | The number of IP datagrams that have been successfully fragmented at this entity. |
| 1.3.6.1.2.1.4.18 | ScalaripFragFails | read-only | mandatory | The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment fl… |
| 1.3.6.1.2.1.4.19 | ScalaripFragCreates | read-only | mandatory | The number of IP datagram fragments that have been generated as a result of fragmentation at this entity. |
| 1.3.6.1.2.1.4.20 | TableipAddrTable | not-accessible | mandatory | The table of addressing information relevant to this entity's IP addresses. |
| 1.3.6.1.2.1.4.20.1 | RowipAddrEntry | not-accessible | mandatory | The addressing information for one of this entity's IP addresses. |
| 1.3.6.1.2.1.4.20.1.1 | ColumnipAdEntAddr | read-only | mandatory | The IP address to which this entry's addressing information pertains. |
| 1.3.6.1.2.1.4.20.1.2 | ColumnipAdEntIfIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.2.1.4.20.1.3 | ColumnipAdEntNetMask | read-only | mandatory | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.2.1.4.20.1.4 | ColumnipAdEntBcastAddr | read-only | mandatory | The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this… |
| 1.3.6.1.2.1.4.20.1.5 | ColumnipAdEntReasmMaxSiz | read-only | mandatory | The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface. |
| 1.3.6.1.2.1.4.21 | TableipRouteTable | not-accessible | mandatory | This entity's IP Routing table. |
| 1.3.6.1.2.1.4.21.1 | RowipRouteEntry | not-accessible | mandatory | A route to a particular destination. |
| 1.3.6.1.2.1.4.21.1.1 | ColumnipRouteDest | read-write | mandatory | The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in… |
| 1.3.6.1.2.1.4.21.1.2 | ColumnipRouteIfIndex | read-write | mandatory | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu… |
| 1.3.6.1.2.1.4.21.1.3 | ColumnipRouteMetric1 | read-write | mandatory | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If … |
| 1.3.6.1.2.1.4.21.1.4 | ColumnipRouteMetric2 | read-write | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If… |
| 1.3.6.1.2.1.4.21.1.5 | ColumnipRouteMetric3 | read-write | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If… |
| 1.3.6.1.2.1.4.21.1.6 | ColumnipRouteMetric4 | read-write | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If… |
| 1.3.6.1.2.1.4.21.1.7 | ColumnipRouteNextHop | read-write | mandatory | The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is… |
| 1.3.6.1.2.1.4.21.1.8 | ColumnipRouteType | read-write | mandatory | The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this objec… |
| 1.3.6.1.2.1.4.21.1.9 | ColumnipRouteProto | read-only | mandatory | The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th… |
| 1.3.6.1.2.1.4.21.1.10 | ColumnipRouteAge | read-write | mandatory | The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except throug… |
| 1.3.6.1.2.1.4.21.1.11 | ColumnipRouteMask | read-write | mandatory | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not s… |
| 1.3.6.1.2.1.4.21.1.12 | ColumnipRouteMetric5 | read-write | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If… |
| 1.3.6.1.2.1.4.21.1.13 | ColumnipRouteInfo | read-only | mandatory | A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the rou… |
| 1.3.6.1.2.1.4.22 | TableipNetToMediaTable | not-accessible | mandatory | The IP Address Translation table used for mapping from IP addresses to physical addresses. |
| 1.3.6.1.2.1.4.22.1 | RowipNetToMediaEntry | not-accessible | mandatory | Each entry contains one IpAddress to `physical' address equivalence. |
| 1.3.6.1.2.1.4.22.1.1 | ColumnipNetToMediaIfIndex | read-write | mandatory | The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified … |
| 1.3.6.1.2.1.4.22.1.2 | ColumnipNetToMediaPhysAddress | read-write | mandatory | The media-dependent `physical' address. |
| 1.3.6.1.2.1.4.22.1.3 | ColumnipNetToMediaNetAddress | read-write | mandatory | The IpAddress corresponding to the media- dependent `physical' address. |
| 1.3.6.1.2.1.4.22.1.4 | ColumnipNetToMediaType | read-write | mandatory | The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it e… |
| 1.3.6.1.2.1.4.23 | ScalaripRoutingDiscards | read-only | mandatory | The number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free-u… |
| 1.3.6.1.2.1.5 | Nodeicmp | |||
| 1.3.6.1.2.1.5.1 | ScalaricmpInMsgs | read-only | mandatory | The total number of ICMP messages which the entity received. Note that this counter includes all those counted by icmpInErrors. |
| 1.3.6.1.2.1.5.2 | ScalaricmpInErrors | read-only | mandatory | The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.). |
| 1.3.6.1.2.1.5.3 | ScalaricmpInDestUnreachs | read-only | mandatory | The number of ICMP Destination Unreachable messages received. |
| 1.3.6.1.2.1.5.4 | ScalaricmpInTimeExcds | read-only | mandatory | The number of ICMP Time Exceeded messages received. |
| 1.3.6.1.2.1.5.5 | ScalaricmpInParmProbs | read-only | mandatory | The number of ICMP Parameter Problem messages received. |
| 1.3.6.1.2.1.5.6 | ScalaricmpInSrcQuenchs | read-only | mandatory | The number of ICMP Source Quench messages received. |
| 1.3.6.1.2.1.5.7 | ScalaricmpInRedirects | read-only | mandatory | The number of ICMP Redirect messages received. |
| 1.3.6.1.2.1.5.8 | ScalaricmpInEchos | read-only | mandatory | The number of ICMP Echo (request) messages received. |
| 1.3.6.1.2.1.5.9 | ScalaricmpInEchoReps | read-only | mandatory | The number of ICMP Echo Reply messages received. |
| 1.3.6.1.2.1.5.10 | ScalaricmpInTimestamps | read-only | mandatory | The number of ICMP Timestamp (request) messages received. |
| 1.3.6.1.2.1.5.11 | ScalaricmpInTimestampReps | read-only | mandatory | The number of ICMP Timestamp Reply messages received. |
| 1.3.6.1.2.1.5.12 | ScalaricmpInAddrMasks | read-only | mandatory | The number of ICMP Address Mask Request messages received. |
| 1.3.6.1.2.1.5.13 | ScalaricmpInAddrMaskReps | read-only | mandatory | The number of ICMP Address Mask Reply messages received. |
| 1.3.6.1.2.1.5.14 | ScalaricmpOutMsgs | read-only | mandatory | The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors. |
| 1.3.6.1.2.1.5.15 | ScalaricmpOutErrors | read-only | mandatory | The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include erro… |
| 1.3.6.1.2.1.5.16 | ScalaricmpOutDestUnreachs | read-only | mandatory | The number of ICMP Destination Unreachable messages sent. |
| 1.3.6.1.2.1.5.17 | ScalaricmpOutTimeExcds | read-only | mandatory | The number of ICMP Time Exceeded messages sent. |
| 1.3.6.1.2.1.5.18 | ScalaricmpOutParmProbs | read-only | mandatory | The number of ICMP Parameter Problem messages sent. |
| 1.3.6.1.2.1.5.19 | ScalaricmpOutSrcQuenchs | read-only | mandatory | The number of ICMP Source Quench Messages Sent. |
| 1.3.6.1.2.1.5.20 | ScalaricmpOutRedirects | read-only | mandatory | The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects. |
| 1.3.6.1.2.1.5.21 | ScalaricmpOutEchos | read-only | mandatory | The number of ICMP Echo (request) messages sent. |
| 1.3.6.1.2.1.5.22 | ScalaricmpOutEchoReps | read-only | mandatory | The number of ICMP Echo Reply messages sent. |
| 1.3.6.1.2.1.5.23 | ScalaricmpOutTimestamps | read-only | mandatory | The number of ICMP Timestamp (request) messages sent. |
| 1.3.6.1.2.1.5.24 | ScalaricmpOutTimestampReps | read-only | mandatory | The number of ICMP Timestamp Reply messages sent. |
| 1.3.6.1.2.1.5.25 | ScalaricmpOutAddrMasks | read-only | mandatory | The number of ICMP Address Mask Request messages sent. |
| 1.3.6.1.2.1.5.26 | ScalaricmpOutAddrMaskReps | read-only | mandatory | The number of ICMP Address Mask Reply messages sent. |
| 1.3.6.1.2.1.6 | Nodetcp | |||
| 1.3.6.1.2.1.6.1 | ScalartcpRtoAlgorithm | read-only | mandatory | The algorithm used to determine the timeout value used for retransmitting unacknowledged octets. |
| 1.3.6.1.2.1.6.2 | ScalartcpRtoMin | read-only | mandatory | The minimum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type d… |
| 1.3.6.1.2.1.6.3 | ScalartcpRtoMax | read-only | mandatory | The maximum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type d… |
| 1.3.6.1.2.1.6.4 | ScalartcpMaxConn | read-only | mandatory | The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should con… |
| 1.3.6.1.2.1.6.5 | ScalartcpActiveOpens | read-only | mandatory | The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state. |
| 1.3.6.1.2.1.6.6 | ScalartcpPassiveOpens | read-only | mandatory | The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state. |
| 1.3.6.1.2.1.6.7 | ScalartcpAttemptFails | read-only | mandatory | The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of … |
| 1.3.6.1.2.1.6.8 | ScalartcpEstabResets | read-only | mandatory | The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state. |
| 1.3.6.1.2.1.6.9 | ScalartcpCurrEstab | read-only | mandatory | The number of TCP connections for which the current state is either ESTABLISHED or CLOSE- WAIT. |
| 1.3.6.1.2.1.6.10 | ScalartcpInSegs | read-only | mandatory | The total number of segments received, including those received in error. This count includes segments received on currently established connections. |
| 1.3.6.1.2.1.6.11 | ScalartcpOutSegs | read-only | mandatory | The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets. |
| 1.3.6.1.2.1.6.12 | ScalartcpRetransSegs | read-only | mandatory | The total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets. |
| 1.3.6.1.2.1.6.13 | TabletcpConnTable | not-accessible | mandatory | A table containing TCP connection-specific information. |
| 1.3.6.1.2.1.6.13.1 | RowtcpConnEntry | not-accessible | mandatory | Information about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection make… |
| 1.3.6.1.2.1.6.13.1.1 | ColumntcpConnState | read-write | mandatory | The state of this TCP connection. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to retu… |
| 1.3.6.1.2.1.6.13.1.2 | ColumntcpConnLocalAddress | read-only | mandatory | The local IP address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IP interface assoc… |
| 1.3.6.1.2.1.6.13.1.3 | ColumntcpConnLocalPort | read-only | mandatory | The local port number for this TCP connection. |
| 1.3.6.1.2.1.6.13.1.4 | ColumntcpConnRemAddress | read-only | mandatory | The remote IP address for this TCP connection. |
| 1.3.6.1.2.1.6.13.1.5 | ColumntcpConnRemPort | read-only | mandatory | The remote port number for this TCP connection. |
| 1.3.6.1.2.1.6.14 | ScalartcpInErrs | read-only | mandatory | The total number of segments received in error (e.g., bad TCP checksums). |
| 1.3.6.1.2.1.6.15 | ScalartcpOutRsts | read-only | mandatory | The number of TCP segments sent containing the RST flag. |
| 1.3.6.1.2.1.7 | Nodeudp | |||
| 1.3.6.1.2.1.7.1 | ScalarudpInDatagrams | read-only | mandatory | The total number of UDP datagrams delivered to UDP users. |
| 1.3.6.1.2.1.7.2 | ScalarudpNoPorts | read-only | mandatory | The total number of received UDP datagrams for which there was no application at the destination port. |
| 1.3.6.1.2.1.7.3 | ScalarudpInErrors | read-only | mandatory | The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port. |
| 1.3.6.1.2.1.7.4 | ScalarudpOutDatagrams | read-only | mandatory | The total number of UDP datagrams sent from this entity. |
| 1.3.6.1.2.1.7.5 | TableudpTable | not-accessible | mandatory | A table containing UDP listener information. |
| 1.3.6.1.2.1.7.5.1 | RowudpEntry | not-accessible | mandatory | Information about a particular current UDP listener. |
| 1.3.6.1.2.1.7.5.1.1 | ColumnudpLocalAddress | read-only | mandatory | The local IP address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any IP interface associated with the node, t… |
| 1.3.6.1.2.1.7.5.1.2 | ColumnudpLocalPort | read-only | mandatory | The local port number for this UDP listener. |
| 1.3.6.1.2.1.8 | Nodeegp | |||
| 1.3.6.1.2.1.10 | Nodetransmission | |||
| 1.3.6.1.2.1.11 | Nodesnmp | |||
| 1.3.6.1.2.1.11.0 | NodecoldStart | A coldStart trap signifies that the sending protocol entity is reinitializing itself such that the agent's configuration or the protocol entity implementation … | ||
| 1.3.6.1.2.1.11.1 | ScalarsnmpInPkts | read-only | mandatory | The total number of Messages delivered to the SNMP entity from the transport service. |
| 1.3.6.1.2.1.11.1 | NodewarmStart | A warmStart trap signifies that the sending protocol entity is reinitializing itself such that neither the agent configuration nor the protocol entity implemen… | ||
| 1.3.6.1.2.1.11.2 | NodelinkDown | A linkDown trap signifies that the sending protocol entity recognizes a failure in one of the communication links represented in the agent's configuration. | ||
| 1.3.6.1.2.1.11.2 | ScalarsnmpOutPkts | read-only | mandatory | The total number of SNMP Messages which were passed from the SNMP protocol entity to the transport service. |
| 1.3.6.1.2.1.11.3 | NodelinkUp | A linkUp trap signifies that the sending protocol entity recognizes that one of the communication links represented in the agent's configuration has come up. | ||
| 1.3.6.1.2.1.11.3 | ScalarsnmpInBadVersions | read-only | mandatory | The total number of SNMP Messages which were delivered to the SNMP protocol entity and were for an unsupported SNMP version. |
| 1.3.6.1.2.1.11.4 | NodeauthenticationFailure | An authenticationFailure trap signifies that the sending protocol entity is the addressee of a protocol message that is not properly authenticated. While imple… | ||
| 1.3.6.1.2.1.11.4 | ScalarsnmpInBadCommunityNames | read-only | mandatory | The total number of SNMP Messages delivered to the SNMP protocol entity which used a SNMP community name not known to said entity. |
| 1.3.6.1.2.1.11.5 | ScalarsnmpInBadCommunityUses | read-only | mandatory | The total number of SNMP Messages delivered to the SNMP protocol entity which represented an SNMP operation which was not allowed by the SNMP community named i… |
| 1.3.6.1.2.1.11.6 | ScalarsnmpInASNParseErrs | read-only | mandatory | The total number of ASN.1 or BER errors encountered by the SNMP protocol entity when decoding received SNMP Messages. |
| 1.3.6.1.2.1.11.8 | ScalarsnmpInTooBigs | read-only | mandatory | The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `tooBig'. |
| 1.3.6.1.2.1.11.9 | ScalarsnmpInNoSuchNames | read-only | mandatory | The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `noSuchName'. |
| 1.3.6.1.2.1.11.10 | ScalarsnmpInBadValues | read-only | mandatory | The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `badValue'. |
| 1.3.6.1.2.1.11.11 | ScalarsnmpInReadOnlys | read-only | mandatory | The total number valid SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `readOnly'. It should be… |
| 1.3.6.1.2.1.11.12 | ScalarsnmpInGenErrs | read-only | mandatory | The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `genErr'. |
| 1.3.6.1.2.1.11.13 | ScalarsnmpInTotalReqVars | read-only | mandatory | The total number of MIB objects which have been retrieved successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and Get-Ne… |
| 1.3.6.1.2.1.11.14 | ScalarsnmpInTotalSetVars | read-only | mandatory | The total number of MIB objects which have been altered successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request PDUs. |
| 1.3.6.1.2.1.11.15 | ScalarsnmpInGetRequests | read-only | mandatory | The total number of SNMP Get-Request PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.16 | ScalarsnmpInGetNexts | read-only | mandatory | The total number of SNMP Get-Next PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.17 | ScalarsnmpInSetRequests | read-only | mandatory | The total number of SNMP Set-Request PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.18 | ScalarsnmpInGetResponses | read-only | mandatory | The total number of SNMP Get-Response PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.19 | ScalarsnmpInTraps | read-only | mandatory | The total number of SNMP Trap PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.20 | ScalarsnmpOutTooBigs | read-only | mandatory | The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `tooBig.' |
| 1.3.6.1.2.1.11.21 | ScalarsnmpOutNoSuchNames | read-only | mandatory | The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status is `noSuchName'. |
| 1.3.6.1.2.1.11.22 | ScalarsnmpOutBadValues | read-only | mandatory | The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `badValue'. |
| 1.3.6.1.2.1.11.24 | ScalarsnmpOutGenErrs | read-only | mandatory | The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `genErr'. |
| 1.3.6.1.2.1.11.25 | ScalarsnmpOutGetRequests | read-only | mandatory | The total number of SNMP Get-Request PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.26 | ScalarsnmpOutGetNexts | read-only | mandatory | The total number of SNMP Get-Next PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.27 | ScalarsnmpOutSetRequests | read-only | mandatory | The total number of SNMP Set-Request PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.28 | ScalarsnmpOutGetResponses | read-only | mandatory | The total number of SNMP Get-Response PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.29 | ScalarsnmpOutTraps | read-only | mandatory | The total number of SNMP Trap PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.30 | ScalarsnmpEnableAuthTraps | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate authentication-failure traps. The value of this object overrides any configuration informatio… |
| 1.3.6.1.2.1.22 | NodesnmpDot3RptrMgt | |||
| 1.3.6.1.2.1.22.1 | NoderptrBasicPackage | |||
| 1.3.6.1.2.1.22.1 | NoderptrHealth | The rptrHealth trap conveys information related to the operational state of the repeater. This trap is sent only when the operational status of the repeater ch… | ||
| 1.3.6.1.2.1.22.1.1 | NoderptrRptrInfo | |||
| 1.3.6.1.2.1.22.1.1.1 | ScalarrptrGroupCapacity | read-only | mandatory | The rptrGroupCapacity is the number of groups that can be contained within the repeater. Within each managed repeater, the groups are uniquely numbered in the … |
| 1.3.6.1.2.1.22.1.1.2 | ScalarrptrOperStatus | read-only | mandatory | The rptrOperStatus object indicates the operational state of the repeater. The rptrHealthText object may be consulted for more specific information about the s… |
| 1.3.6.1.2.1.22.1.1.3 | ScalarrptrHealthText | read-only | mandatory | The health text object is a text string that provides information relevant to the operational state of the repeater. Agents may use this mechanism to provide d… |
| 1.3.6.1.2.1.22.1.1.4 | ScalarrptrReset | read-write | mandatory | Setting this variable to reset(2) causes a transition to the START state of Fig 9-2 in section 9 [11]. Setting this variable to noReset(1) has no effect. The a… |
| 1.3.6.1.2.1.22.1.1.5 | ScalarrptrNonDisruptTest | read-write | mandatory | Setting this variable to selfTest(2) causes the repeater to perform a agent-specific, non- disruptive self-test that has the following characteristics: (1) The… |
| 1.3.6.1.2.1.22.1.1.6 | ScalarrptrTotalPartitionedPorts | read-only | mandatory | This object returns the total number of ports in the repeater whose current state meets all three of the following criteria: rptrPortOperStatus does not have t… |
| 1.3.6.1.2.1.22.1.2 | NoderptrGroupInfo | |||
| 1.3.6.1.2.1.22.1.2.1 | TablerptrGroupTable | not-accessible | mandatory | Table of descriptive and status information about the groups of ports. |
| 1.3.6.1.2.1.22.1.2.1.1 | RowrptrGroupEntry | not-accessible | mandatory | An entry in the table, containing information about a single group of ports. |
| 1.3.6.1.2.1.22.1.2.1.1.1 | ColumnrptrGroupIndex | read-only | mandatory | This variable identifies the group within the repeater for which this entry contains information. This value is never greater than rptrGroupCapacity. |
| 1.3.6.1.2.1.22.1.2.1.1.2 | ColumnrptrGroupDescr | read-only | mandatory | A textual description of the group. This value should include the full name and version identification of the group's hardware type and indicate how the group … |
| 1.3.6.1.2.1.22.1.2.1.1.3 | ColumnrptrGroupObjectID | read-only | mandatory | The vendor's authoritative identification of the group. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straight-forwar… |
| 1.3.6.1.2.1.22.1.2.1.1.4 | ColumnrptrGroupOperStatus | read-only | mandatory | An object that indicates the operational status of the group. A status of notPresent(4) indicates that the group has been physically removed from the repeater.… |
| 1.3.6.1.2.1.22.1.2.1.1.5 | ColumnrptrGroupLastOperStatusChange | read-only | mandatory | An object that contains the value of sysUpTime at the time that the value of the rptrGroupOperStatus object for this group last changed. A value of zero indica… |
| 1.3.6.1.2.1.22.1.2.1.1.6 | ColumnrptrGroupPortCapacity | read-only | mandatory | The rptrGroupPortCapacity is the number of ports that can be contained within the group. Valid range is 1-1024. Within each group, the ports are uniquely numbe… |
| 1.3.6.1.2.1.22.1.3 | NoderptrPortInfo | |||
| 1.3.6.1.2.1.22.1.3.1 | TablerptrPortTable | not-accessible | mandatory | Table of descriptive and status information about the ports. |
| 1.3.6.1.2.1.22.1.3.1.1 | RowrptrPortEntry | not-accessible | mandatory | An entry in the table, containing information about a single port. |
| 1.3.6.1.2.1.22.1.3.1.1.1 | ColumnrptrPortGroupIndex | read-only | mandatory | This variable identifies the group containing the port for which this entry contains information. |
| 1.3.6.1.2.1.22.1.3.1.1.2 | ColumnrptrPortIndex | read-only | mandatory | This variable identifies the port within the group within the repeater for which this entry contains management information. This value can never be greater th… |
| 1.3.6.1.2.1.22.1.3.1.1.3 | ColumnrptrPortAdminStatus | read-write | mandatory | Setting this object to disabled(2) disables the port. A disabled port neither transmits nor receives. Once disabled, a port must be explicitly enabled to resto… |
| 1.3.6.1.2.1.22.1.3.1.1.4 | ColumnrptrPortAutoPartitionState | read-only | mandatory | The autoPartitionState flag indicates whether the port is currently partitioned by the repeater's auto-partition protection. The conditions that cause port par… |
| 1.3.6.1.2.1.22.1.3.1.1.5 | ColumnrptrPortOperStatus | read-only | mandatory | This object indicates the port's operational state. The notPresent(3) state indicates the port is physically removed (note this may or may not be possible depe… |
| 1.3.6.1.2.1.22.2 | NoderptrGroupChange | This trap is sent when a change occurs in the group structure of a repeater. This occurs only when a group is logically removed from or added to a repeater. Th… | ||
| 1.3.6.1.2.1.22.2 | NoderptrMonitorPackage | |||
| 1.3.6.1.2.1.22.2.1 | NoderptrMonitorRptrInfo | |||
| 1.3.6.1.2.1.22.2.1.1 | ScalarrptrMonitorTransmitCollisions | read-only | mandatory | This counter is incremented every time the repeater state machine enters the TRANSMIT COLLISION state from any state other than ONE PORT LEFT (Ref: Fig 9-2) [1… |
| 1.3.6.1.2.1.22.2.2 | NoderptrMonitorGroupInfo | |||
| 1.3.6.1.2.1.22.2.2.1 | TablerptrMonitorGroupTable | not-accessible | mandatory | Table of performance and error statistics for the groups. |
| 1.3.6.1.2.1.22.2.2.1.1 | RowrptrMonitorGroupEntry | not-accessible | mandatory | An entry in the table, containing total performance and error statistics for a single group. Regular retrieval of the information in this table provides a mean… |
| 1.3.6.1.2.1.22.2.2.1.1.1 | ColumnrptrMonitorGroupIndex | read-only | mandatory | This object identifies the group within the repeater for which this entry contains information. |
| 1.3.6.1.2.1.22.2.2.1.1.2 | ColumnrptrMonitorGroupTotalFrames | read-only | mandatory | The total number of frames of valid frame length that have been received on the ports in this group. This counter is the summation of the values of the rptrMon… |
| 1.3.6.1.2.1.22.2.2.1.1.3 | ColumnrptrMonitorGroupTotalOctets | read-only | mandatory | The total number of octets contained in the valid frames that have been received on the ports in this group. This counter is the summation of the values of the… |
| 1.3.6.1.2.1.22.2.2.1.1.4 | ColumnrptrMonitorGroupTotalErrors | read-only | mandatory | The total number of errors which have occurred on all of the ports in this group. This counter is the summation of the values of the rptrMonitorPortTotalErrors… |
| 1.3.6.1.2.1.22.2.3 | NoderptrMonitorPortInfo | |||
| 1.3.6.1.2.1.22.2.3.1 | TablerptrMonitorPortTable | not-accessible | mandatory | Table of performance and error statistics for the ports. |
| 1.3.6.1.2.1.22.2.3.1.1 | RowrptrMonitorPortEntry | not-accessible | mandatory | An entry in the table, containing performance and error statistics for a single port. |
| 1.3.6.1.2.1.22.2.3.1.1.1 | ColumnrptrMonitorPortGroupIndex | read-only | mandatory | This object identifies the group containing the port for which this entry contains information. |
| 1.3.6.1.2.1.22.2.3.1.1.2 | ColumnrptrMonitorPortIndex | read-only | mandatory | This object identifies the port within the group for which this entry contains information. |
| 1.3.6.1.2.1.22.2.3.1.1.3 | ColumnrptrMonitorPortReadableFrames | read-only | mandatory | This object is the number of frames of valid frame length that have been received on this port. This counter is incremented by one for each frame received on t… |
| 1.3.6.1.2.1.22.2.3.1.1.4 | ColumnrptrMonitorPortReadableOctets | read-only | mandatory | This object is the number of octets contained in valid frames that have been received on this port. This counter is incremented by OctetCount for each frame re… |
| 1.3.6.1.2.1.22.2.3.1.1.5 | ColumnrptrMonitorPortFCSErrors | read-only | mandatory | This counter is incremented by one for each frame received on this port with the FCSError signal asserted and the FramingError and CollisionEvent signals deass… |
| 1.3.6.1.2.1.22.2.3.1.1.6 | ColumnrptrMonitorPortAlignmentErrors | read-only | mandatory | This counter is incremented by one for each frame received on this port with the FCSError and FramingError signals asserted and CollisionEvent signal deasserte… |
| 1.3.6.1.2.1.22.2.3.1.1.7 | ColumnrptrMonitorPortFrameTooLongs | read-only | mandatory | This counter is incremented by one for each frame received on this port whose OctetCount is greater than maxFrameSize (Ref: 4.4.2.1, IEEE 802.3 Std). If rptrMo… |
| 1.3.6.1.2.1.22.2.3.1.1.8 | ColumnrptrMonitorPortShortEvents | read-only | mandatory | This counter is incremented by one for each CarrierEvent on this port with ActivityDuration less than ShortEventMaxTime. ShortEventMaxTime is greater than 74 b… |
| 1.3.6.1.2.1.22.2.3.1.1.9 | ColumnrptrMonitorPortRunts | read-only | mandatory | This counter is incremented by one for each CarrierEvent on this port that meets one of the following two conditions. Only one test need be made. a) The Activi… |
| 1.3.6.1.2.1.22.2.3.1.1.10 | ColumnrptrMonitorPortCollisions | read-only | mandatory | This counter is incremented by one for any CarrierEvent signal on any port for which the CollisionEvent signal on this port is asserted. The approximate minimu… |
| 1.3.6.1.2.1.22.2.3.1.1.11 | ColumnrptrMonitorPortLateEvents | read-only | mandatory | This counter is incremented by one for each CarrierEvent on this port in which the CollIn(X) variable transitions to the value SQE (Ref: 9.6.6.2, IEEE 802.3 St… |
| 1.3.6.1.2.1.22.2.3.1.1.12 | ColumnrptrMonitorPortVeryLongEvents | read-only | mandatory | This counter is incremented by one for each CarrierEvent on this port whose ActivityDuration is greater than the MAU Jabber Lockup Protection timer TW3 (Ref: 9… |
| 1.3.6.1.2.1.22.2.3.1.1.13 | ColumnrptrMonitorPortDataRateMismatches | read-only | mandatory | This counter is incremented by one for each frame received on this port that meets all of the following conditions: a) The CollisionEvent signal is not asserte… |
| 1.3.6.1.2.1.22.2.3.1.1.14 | ColumnrptrMonitorPortAutoPartitions | read-only | mandatory | This counter is incremented by one for each time the repeater has automatically partitioned this port. The conditions that cause port partitioning are specifie… |
| 1.3.6.1.2.1.22.2.3.1.1.15 | ColumnrptrMonitorPortTotalErrors | read-only | mandatory | The total number of errors which have occurred on this port. This counter is the summation of the values of other error counters (for the same port), namely: r… |
| 1.3.6.1.2.1.22.3 | NoderptrAddrTrackPackage | |||
| 1.3.6.1.2.1.22.3 | NoderptrResetEvent | The rptrReset trap conveys information related to the operational state of the repeater. This trap is sent on completion of a repeater reset action. A repeater… | ||
| 1.3.6.1.2.1.22.3.1 | NoderptrAddrTrackRptrInfo | |||
| 1.3.6.1.2.1.22.3.2 | NoderptrAddrTrackGroupInfo | |||
| 1.3.6.1.2.1.22.3.3 | NoderptrAddrTrackPortInfo | |||
| 1.3.6.1.2.1.22.3.3.1 | TablerptrAddrTrackTable | not-accessible | mandatory | Table of address mapping information about the ports. |
| 1.3.6.1.2.1.22.3.3.1.1 | RowrptrAddrTrackEntry | not-accessible | mandatory | An entry in the table, containing address mapping information about a single port. |
| 1.3.6.1.2.1.22.3.3.1.1.1 | ColumnrptrAddrTrackGroupIndex | read-only | mandatory | This object identifies the group containing the port for which this entry contains information. |
| 1.3.6.1.2.1.22.3.3.1.1.2 | ColumnrptrAddrTrackPortIndex | read-only | mandatory | This object identifies the port within the group for which this entry contains information. |
| 1.3.6.1.2.1.22.3.3.1.1.3 | ColumnrptrAddrTrackLastSourceAddress | read-only | mandatory | This object is the SourceAddress of the last readable frame (i.e., counted by rptrMonitorPortReadableFrames) received by this port. |
| 1.3.6.1.2.1.22.3.3.1.1.4 | ColumnrptrAddrTrackSourceAddrChanges | read-only | mandatory | This counter is incremented by one for each time that the rptrAddrTrackLastSourceAddress attribute for this port has changed. This may indicate whether a link … |
| 1.3.6.1.4.1.43 | Nodea3Com | |||
| 1.3.6.1.4.1.43.1 | Nodeproducts | |||
| 1.3.6.1.4.1.43.1.1 | NodeterminalServer | |||
| 1.3.6.1.4.1.43.1.2 | NodededicatedBridgeServer | |||
| 1.3.6.1.4.1.43.1.3 | NodededicatedRouteServer | |||
| 1.3.6.1.4.1.43.1.4 | Nodebrouter | |||
| 1.3.6.1.4.1.43.1.5 | NodegenericMSWorkstation | |||
| 1.3.6.1.4.1.43.1.6 | NodegenericMSServer | |||
| 1.3.6.1.4.1.43.1.7 | NodegenericUnixServer | |||
| 1.3.6.1.4.1.43.1.8 | Nodehub | |||
| 1.3.6.1.4.1.43.1.8.1 | NodelinkBuilder3GH | |||
| 1.3.6.1.4.1.43.1.8.2 | NodelinkBuilder10BTi | |||
| 1.3.6.1.4.1.43.1.8.3 | NodelinkBuilderECS | |||
| 1.3.6.1.4.1.43.1.8.4 | NodelinkBuilderMSH | |||
| 1.3.6.1.4.1.43.1.8.4.1 | Nodemisc | |||
| 1.3.6.1.4.1.43.1.8.4.1.1 | ScalartempSensorOutput | read-only | mandatory | Mounted on the Management card is a temperature sensing device. This device provides three output levels : OK, WARM and DANGER. |
| 1.3.6.1.4.1.43.1.8.4.1.2 | TablestatusInputTable | not-accessible | mandatory | This table provides information about and allows configuration of the 4 general purpose inputs provided by the MSH management card. |
| 1.3.6.1.4.1.43.1.8.4.1.2.1 | RowstatusInputTableEntry | not-accessible | mandatory | This entry describes one of the status inputs provided by the MSH management card. |
| 1.3.6.1.4.1.43.1.8.4.1.2.1.1 | ColumnstatusInputIndex | read-only | mandatory | Identify one of the status inputs provided by the MSH card. |
| 1.3.6.1.4.1.43.1.8.4.1.2.1.2 | ColumnstatusInputState | read-only | mandatory | Each of the MSH management general purpose input lines is actually a pair of wires. In order to use one of the lines the two wires of a particular pair must be… |
| 1.3.6.1.4.1.43.1.8.4.1.2.1.3 | ColumnstatusTrapEnable | read-write | mandatory | By setting the value of this object to enable, the MSH will monitor the value of statusInputState for changes. If a change from open to close or from close to … |
| 1.3.6.1.4.1.43.1.8.4.1.2.1.4 | ColumnstatusName | read-write | mandatory | This is a writable string associated with one of the status inputs. By default the string will initialise to 'Status Input #x' where x is 1, 2, 3 or 4. The use… |
| 1.3.6.1.4.1.43.1.8.4.1.3 | TablechassisMgmtMACTable | not-accessible | mandatory | The chassis management card contains an 802.3 MAC and physical layer that can be used for management traffic. In some situations this interface may be inapprop… |
| 1.3.6.1.4.1.43.1.8.4.1.3.1 | RowchassisMgmtMACEntry | not-accessible | mandatory | This entry describes the abilities and the state of one of the MACs available for management use in the chassis. |
| 1.3.6.1.4.1.43.1.8.4.1.3.1.1 | ColumnmacSlotNumber | read-only | mandatory | Index into the table. This is identifies the card on which the MAC that this conceptual row describes. |
| 1.3.6.1.4.1.43.1.8.4.1.3.1.2 | ColumnmacIndex | read-only | mandatory | Index into the table. This object distinguishes the MAC described by this row in the conceptual table from the potentially many MACs supported by this card. |
| 1.3.6.1.4.1.43.1.8.4.1.3.1.3 | ColumnmacBroadcastAvailable | read-only | mandatory | This is an informational field. It describes the capability of the MAC represented by this conceptual row to receive and transmit a 'broadcast' packet. Note th… |
| 1.3.6.1.4.1.43.1.8.4.1.3.1.4 | ColumnmacLSAPFiltering | read-only | mandatory | This is an informational field. It describes the capability of the MAC represented by this conceptual row to directly filter packets based on the contents of t… |
| 1.3.6.1.4.1.43.1.8.4.1.3.1.5 | ColumnmacTypeFiltering | read-only | mandatory | This is an informational field. It describes the capability of the MAC represented by this conceptual row to directly filter packets based on type field locall… |
| 1.3.6.1.4.1.43.1.8.4.1.3.1.6 | ColumnmacMaxPDUsize | read-only | mandatory | This is an informational field. It indicates the maximum number of data octets that can be transmitted or received using the shared MAC. When used for SNMP it … |
| 1.3.6.1.4.1.43.1.8.4.1.3.1.7 | ColumnmacPhyAddress | read-only | mandatory | The physical MAC address of this specific MAC. |
| 1.3.6.1.4.1.43.1.8.4.1.3.1.8 | ColumnmacStatus | read-write | mandatory | This object is used to enable or disable a shared MAC for SNMP protocol usage. Note that if a shared MAC has insufficient capabilities to run the SNMP stack th… |
| 1.3.6.1.4.1.43.1.8.4.1.4 | TablechassisLedTable | not-accessible | mandatory | This table contains configuration information for each of the card specific LEDs on the front panel module. There is one LED for each card location. |
| 1.3.6.1.4.1.43.1.8.4.1.4.1 | RowchassisLedEntry | not-accessible | mandatory | This entry describes the abilities and the state of one of the MACs available for management use in the chassis. |
| 1.3.6.1.4.1.43.1.8.4.1.4.1.1 | ColumnchassisSlotNumber | read-only | mandatory | Identifies which LED this row describes. |
| 1.3.6.1.4.1.43.1.8.4.1.4.1.2 | ColumnchassisLedColour | read-only | mandatory | Read the current colour of the LED. This is intended for use by FullView type applications. |
| 1.3.6.1.4.1.43.1.8.4.1.4.1.3 | ColumnchassisAttentionState | read-write | mandatory | Writing 'attention' to this object will cause the LED above that card to become RED. This is intended to be used to aid maintenance of a large system. |
| 1.3.6.1.4.1.43.1.8.4.2 | NodemshFault | |||
| 1.3.6.1.4.1.43.1.8.4.2.1 | ScalarmshFaultModifiedFlag | read-write | mandatory | In order to ensure a clean read of the Fault table this flag should be set to clean_read when commencing to read the table and should be examined after reading… |
| 1.3.6.1.4.1.43.1.8.4.2.2 | TablemshFaultTable | not-accessible | mandatory | The Fault Table. |
| 1.3.6.1.4.1.43.1.8.4.2.2.1 | RowmshFaultEntry | not-accessible | mandatory | Information relating to a single fault. |
| 1.3.6.1.4.1.43.1.8.4.2.2.1.1 | ColumnmshFaultIndex | read-only | mandatory | The index into the Fault table. The initial read from the table should be read as the next, from an index of 0; subsequent reads should read the next from the … |
| 1.3.6.1.4.1.43.1.8.4.2.2.1.2 | ColumnmshFaultErrorNumber | read-only | mandatory | This error number for this fault log entry. |
| 1.3.6.1.4.1.43.1.8.4.2.2.1.3 | ColumnmshFaultTimeStamp | read-only | mandatory | The time since startup, in milliseconds, when the fault occurred. |
| 1.3.6.1.4.1.43.1.8.4.2.2.1.4 | ColumnmshFaultRestartCount | read-only | mandatory | The number of restarts at time of fault. |
| 1.3.6.1.4.1.43.1.8.5 | NodelinkBuilderFMS | |||
| 1.3.6.1.4.1.43.1.9 | Nodecards | |||
| 1.3.6.1.4.1.43.1.9.1 | NodelinkBuilder3GH-cards | |||
| 1.3.6.1.4.1.43.1.9.2 | NodelinkBuilder10BTi-cards | |||
| 1.3.6.1.4.1.43.1.9.2.1 | NodelinkBuilder10BTi-cards-utp | |||
| 1.3.6.1.4.1.43.1.9.3 | NodelinkBuilderECS-cards | |||
| 1.3.6.1.4.1.43.1.9.4 | NodelinkBuilderMSH-cards | |||
| 1.3.6.1.4.1.43.1.9.5 | NodelinkBuilderFMS-cards | |||
| 1.3.6.1.4.1.43.1.9.5.1 | NodelinkBuilderFMS-cards-utp | |||
| 1.3.6.1.4.1.43.1.9.5.2 | NodelinkBuilderFMS-cards-coax | |||
| 1.3.6.1.4.1.43.1.9.5.3 | NodelinkBuilderFMS-cards-fiber | |||
| 1.3.6.1.4.1.43.3 | Nodeamp-mib | |||
| 1.3.6.1.4.1.43.4 | NodegenericTrap | |||
| 1.3.6.1.4.1.43.5 | NodeviewBuilderApps | |||
| 1.3.6.1.4.1.43.6 | NodespecificTrap | |||
| 1.3.6.1.4.1.43.7 | NodelinkBuilder3GH-mib | |||
| 1.3.6.1.4.1.43.8 | NodelinkBuilder10BTi-mib | |||
| 1.3.6.1.4.1.43.9 | NodelinkBuilderECS-mib | |||
| 1.3.6.1.4.1.43.10 | Nodegeneric | |||
| 1.3.6.1.4.1.43.10.1 | NodegenExperimental | |||
| 1.3.6.1.4.1.43.10.1.1 | NodetestData | |||
| 1.3.6.1.4.1.43.10.2 | Nodesetup | |||
| 1.3.6.1.4.1.43.10.2.1 | NodesetupGeneral | |||
| 1.3.6.1.4.1.43.10.2.1.1 | ScalarheartbeatInterval | read-write | mandatory | The time, in seconds, between successive heartbeat events sent to the management station. An interval of 0 indicates that no heartbeat events are to be generat… |
| 1.3.6.1.4.1.43.10.2.2 | NodesetupIp | |||
| 1.3.6.1.4.1.43.10.2.2.1 | TablesetIpIfTable | not-accessible | mandatory | This table shows the IP address and network mask to be used to initialise ipAddrTable on each network interface after the next system restart. There is one ent… |
| 1.3.6.1.4.1.43.10.2.2.1.1 | RowsetIpIfEntry | not-accessible | mandatory | The default information relating to a single IP interface. |
| 1.3.6.1.4.1.43.10.2.2.1.1.1 | ColumnsetIpIfIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.43.10.2.2.1.1.2 | ColumnsetIpIfAddr | read-write | mandatory | The IP address to be used for this interface. |
| 1.3.6.1.4.1.43.10.2.2.1.1.3 | ColumnsetIpIfMask | read-write | mandatory | The IP network mask to be used for this interface. |
| 1.3.6.1.4.1.43.10.2.2.2 | ScalarsetIpIfRouter | read-write | mandatory | This is the IP address of the default router to be used for sending IP datagrams to remote destinations which have no suitable entry in the routing table. This… |
| 1.3.6.1.4.1.43.10.2.3 | NodesetupStart | |||
| 1.3.6.1.4.1.43.10.2.3.1 | ScalarstartPROMSwVerNo | read-only | mandatory | The PROM software version number. |
| 1.3.6.1.4.1.43.10.2.3.2 | ScalarstartRestartCount | read-only | mandatory | The number of restarts the box has undergone, either power on or reset switch or watchdog expiries. |
| 1.3.6.1.4.1.43.10.2.3.3 | ScalarstartLastRestartType | read-only | mandatory | The reason for the last system restart. This may be due to management command; watchdog timeout expiry; power interruption; the reset switch was pressed or sys… |
| 1.3.6.1.4.1.43.10.2.3.4 | ScalarstartResetAction | read-write | mandatory | Reset the device with manufacturers default configuration if the manDefaultReset value is written to this item. |
| 1.3.6.1.4.1.43.10.2.3.5 | ScalarstartLastSystemError | read-only | mandatory | The last System Error experienced by the system. This is set equal to the last system error code recorded in non-volatile memory on startup. When the system is… |
| 1.3.6.1.4.1.43.10.2.3.6 | ScalarstartRestartAction | read-write | mandatory | Restart the device with it's current configuration if the restart value is written to this item. |
| 1.3.6.1.4.1.43.10.3 | NodesysLoader | |||
| 1.3.6.1.4.1.43.10.3.1 | TableloadableDeviceTable | not-accessible | mandatory | A table which is used to control the loading of new software images to the devices controlled by the management agent. By convention the first entry in the tab… |
| 1.3.6.1.4.1.43.10.3.1.1 | RowloadableDeviceEntry | not-accessible | mandatory | An entry containing the objects for controlling the loading of a software image to a single device within the system. |
| 1.3.6.1.4.1.43.10.3.1.1.1 | ColumnslDeviceType | read-only | mandatory | The type of the device to load. Simple devices only contain one device type, which is always `system'. More complex devices, probably containing multiple proce… |
| 1.3.6.1.4.1.43.10.3.1.1.2 | ColumnslDeviceInstance | read-only | mandatory | The instance of the device type specified by slDeviceType. By convention instance 1 of the system devices is the one containing the management agent, and alway… |
| 1.3.6.1.4.1.43.10.3.1.1.3 | ColumnslLoadStatus | read-only | mandatory | The status of the last system load operation requested for this device. If the value of this object is in the range 1 to 18 inclusive, the download failed, and… |
| 1.3.6.1.4.1.43.10.3.1.1.4 | ColumnslSoftwareVersion | read-only | mandatory | The version identifier of the software running in the device. |
| 1.3.6.1.4.1.43.10.3.1.1.5 | ColumnslHardwareVersion | read-only | mandatory | The version number identifying the revision level of the hardware of the device |
| 1.3.6.1.4.1.43.10.3.1.1.6 | ColumnslFilename | read-write | mandatory | The name of the file which contains the software image to load, or which was the last loaded to the device. |
| 1.3.6.1.4.1.43.10.3.1.1.7 | ColumnslServerIpAddress | read-write | mandatory | The IP address of the host containing the software image to load, or from which the last image loaded was read. |
| 1.3.6.1.4.1.43.10.3.1.1.8 | ColumnslLoad | write-only | mandatory | Writing 2 to this object causes the agent to attempt to load a new software image to the corresponding device. The file to load and the IP address of the stati… |
| 1.3.6.1.4.1.43.10.4 | Nodesecurity | |||
| 1.3.6.1.4.1.43.10.5 | Nodegauges | |||
| 1.3.6.1.4.1.43.10.5.1 | TablegaugeTable | not-accessible | mandatory | A table used to define Alarms. |
| 1.3.6.1.4.1.43.10.5.1.1 | RowgaugeTableEntry | not-accessible | mandatory | This table allows Alarms to be set-up on items in the MIB. |
| 1.3.6.1.4.1.43.10.5.1.1.1 | ColumngaugeIndex | read-only | mandatory | Unique identifier for a row in the Alarm Table. Allocated by the Alarms Subsystem. An integer in the range 1..gaugeTableSize. |
| 1.3.6.1.4.1.43.10.5.1.1.2 | ColumngaugeItemId | read-write | mandatory | The object Id and qualifier of the item to be monitored by this alarm. |
| 1.3.6.1.4.1.43.10.5.1.1.3 | ColumngaugeItemType | read-write | mandatory | A 'counter', by definition will always be a positive number. 'Meters' can be signed or unsigned. |
| 1.3.6.1.4.1.43.10.5.1.1.4 | ColumngaugeSamplesPerAverage | read-write | mandatory | The number of samples used to calculate the Alarm Value. The default number of samples is four. If a SamplesPerAverage value of one is used, no average is calc… |
| 1.3.6.1.4.1.43.10.5.1.1.5 | ColumngaugeSamplePeriod | read-write | mandatory | Number of seconds between samples. The total averaging period is given by (gaugeSamplesPerAverage * gaugeSamplePeiod) secs. |
| 1.3.6.1.4.1.43.10.5.1.1.6 | ColumngaugeValue | read-write | mandatory | The most recently computed average of the item being monitored. For a `meter' alarm, this is the simple average of the samples. For a 'counter' alarm, this is … |
| 1.3.6.1.4.1.43.10.5.1.1.7 | ColumngaugePeakValue | read-write | mandatory | The highest recorded Alarm Value. This will be either a signed or unsigned 32 bit value depending on the gaugeItemType |
| 1.3.6.1.4.1.43.10.5.1.1.8 | ColumngaugeThresholdLevel | read-write | mandatory | The threshold value of the the Alarm which causes the ThresholdState to move from the 'ready' state to the 'fired' state and also causes the the ThresholdActio… |
| 1.3.6.1.4.1.43.10.5.1.1.9 | ColumngaugeRecoveryLevel | read-write | mandatory | The threshold value of the the Alarm which causes the ThresholdState to move from the `fired' state to the `ready' state and also causes the the RecoveryAction… |
| 1.3.6.1.4.1.43.10.5.1.1.10 | ColumngaugeThresholdAction | read-write | mandatory | This object identifies the action to be taken when an Alarm crosses the Threshold Level. The default action will be to send a trigger event (sendTrap). The act… |
| 1.3.6.1.4.1.43.10.5.1.1.11 | ColumngaugeRecoveryAction | read-write | mandatory | This object identifies the action to be taken when a 'fired' Alarm crosses the Recovery Level. The default action will be to send a recovery event (sendTrap). … |
| 1.3.6.1.4.1.43.10.5.1.1.12 | ColumngaugeState | read-write | mandatory | onTriggersEnabled - This is the normal active state of a alarm. The gaugeValue is updated on every sample and if it crosses the Threshold or Recovery Levels, t… |
| 1.3.6.1.4.1.43.10.5.2 | ScalargaugeTableSize | read-only | mandatory | Number of entries in Alarm Table. The size of the Alarm Table depends on the requirements and available resources of the device. The actual maximum will probab… |
| 1.3.6.1.4.1.43.10.5.3 | ScalargaugeThresholdLevelScaler | read-write | mandatory | The ThresholdLevel is set to this percentage of the peakValue when the Alarm is auto-calibrated. e.g gaugeThresholdLevelScaler = 120 gaugePeakValue = 360 After… |
| 1.3.6.1.4.1.43.10.5.4 | ScalargaugeRecoveryLevelScaler | read-write | mandatory | The RecoveryLevel is set to this percentage of the peakValue when the Alarm is auto-calibrated. e.g gaugeRecoveryLevelScaler = 90 gaugePeakValue = 360 After wr… |
| 1.3.6.1.4.1.43.10.5.5 | ScalargaugeTableUpdate | write-only | mandatory | Performs the specified operation on every Alarm in the table. |
| 1.3.6.1.4.1.43.10.5.6 | ScalargaugeConfigureObjId | write-only | mandatory | Object Id and qualifier of alarm(s) to be updated. |
| 1.3.6.1.4.1.43.10.5.7 | ScalargaugeConfigureColumn | write-only | mandatory | Alarm Table Column to be updated. |
| 1.3.6.1.4.1.43.10.5.8 | ScalargaugeConfigureValue | write-only | mandatory | Value to be written to the 'gaugeConfigureColumn' of the Alarms which match the 'gaugeConfigureObjId'. Writing to this value initiates the operation. |
| 1.3.6.1.4.1.43.10.5.9 | ScalargaugeNextFreeIndex | read-only | mandatory | Indicates the gaugeIndex which must be used to create the next alarm. Index is set to GAUGE_TABLE_FULL (zero) if there are no free rows in the table. |
| 1.3.6.1.4.1.43.10.6 | NodeasciiAgent | |||
| 1.3.6.1.4.1.43.10.6.1 | ScalarascTimeAttemptedLogin | read-write | mandatory | Time in hundredths of a second when the last Login was attempted. Note, that only the ASCII Agent can write to this parameter. A write operation from any other… |
| 1.3.6.1.4.1.43.10.6.2 | ScalarascUserNameForLastAttemptedLogin | read-write | mandatory | An ASCII string used when attempted login. Empty string is NOT valid. Note, that only the ASCII Agent can write to this parameter. A write operation from any o… |
| 1.3.6.1.4.1.43.10.6.3 | ScalarascLoginStatus | read-write | mandatory | Status of last attempted login. The value 'loginOKFromTelnet' or 'loginOKFromSerialPort' is used to show that the user was allowed access via Telnet or Serial … |
| 1.3.6.1.4.1.43.10.6.4 | ScalarascLocalManagementBanner | read-write | mandatory | An ASCII string describing the Banner to appear on the FIRST screen of the Local Management Terminal. The string of 490 characters defines a region in the cent… |
| 1.3.6.1.4.1.43.10.7 | NodeserialIf | |||
| 1.3.6.1.4.1.43.10.7.1 | ScalarsiSlipPort | read-write | mandatory | This object identifies the serial port which SLIP can use to send/receive packets. If this object is set to 0xFFFF, then SLIP cannot send/receive packets. |
| 1.3.6.1.4.1.43.10.7.2 | TableconfigV24Table | not-accessible | mandatory | Configuration parameters for all the V.24 ports in a system. |
| 1.3.6.1.4.1.43.10.7.2.1 | RowconfigV24Entry | not-accessible | mandatory | Configuration parameters for a V.24 port in the system. |
| 1.3.6.1.4.1.43.10.7.2.1.1 | ColumnconfigV24PortID | read-only | mandatory | This attribute uniquely identifies this V.24 port, it is the index for the V.24 table. |
| 1.3.6.1.4.1.43.10.7.2.1.2 | ColumnconfigV24ConnType | read-write | mandatory | This determines if the V.24 port is to be connected locally to a terminal or terminal emulator in which case no interface signals need to be asserted unless re… |
| 1.3.6.1.4.1.43.10.7.2.1.3 | ColumnconfigV24AutoConfig | read-write | mandatory | This determines if the configuration parameters for the V.24 port, speed, parity, stop bits, character size, are to be determined automatically from an initial… |
| 1.3.6.1.4.1.43.10.7.2.1.4 | ColumnconfigV24Speed | read-write | mandatory | This determines the receive and transmit speed of the V.24 port unless the autoconfigure attribute is enabled when the data rates are determined from the line.… |
| 1.3.6.1.4.1.43.10.7.2.1.5 | ColumnconfigV24CharSize | read-write | mandatory | This determines the character size, unless the autoconfigure attribute is enabled when character size is determined automatically from the line, it may be set … |
| 1.3.6.1.4.1.43.10.7.2.1.6 | ColumnconfigV24StopBits | read-write | mandatory | This determines the number of stop bits. |
| 1.3.6.1.4.1.43.10.7.2.1.7 | ColumnconfigV24Parity | read-write | mandatory | This determines the parity option to be used, unless the autoconfigure attribute is enabled when parity is determined automatically from the line, it may be se… |
| 1.3.6.1.4.1.43.10.7.2.1.8 | ColumnconfigV24DSRControl | read-write | mandatory | This attribute is only applicable to local connection types. It determines if DSR need be asserted for a local connection to be made and if the connection need… |
| 1.3.6.1.4.1.43.10.7.2.1.9 | ColumnconfigV24DCDControl | read-write | mandatory | This attribute is only applicable to local connection types. It determines if DCD need be asserted for a local connection to be made and if the connection shou… |
| 1.3.6.1.4.1.43.10.7.2.1.10 | ColumnconfigV24FlowControl | read-write | mandatory | This determines the flow control protocol to be used, either no flow control, xon-xoff, rts-cts full duplex or rts-cts. Full duplex rts/cts uses the rts and ct… |
| 1.3.6.1.4.1.43.10.7.2.1.11 | ColumnconfigV24Update | read-write | mandatory | This attribute may be written to to force the operational V.24 port parameters to be updated. |
| 1.3.6.1.4.1.43.10.8 | NoderepeaterMgmt | |||
| 1.3.6.1.4.1.43.10.8.6 | NodemrmSecurityPackage | |||
| 1.3.6.1.4.1.43.10.8.6.1 | TablemrmSecurePortTable | not-accessible | mandatory | A table which allows management of the secure Repeater Ports. |
| 1.3.6.1.4.1.43.10.8.6.1.1 | RowmrmSecurePortEntry | not-accessible | mandatory | This table allows repeater ports to be configured on a per port basis. It is index using the objects mrmSecRepIndex, mrmSecSlotIndex and mrmSecPortIndex. |
| 1.3.6.1.4.1.43.10.8.6.1.1.1 | ColumnmrmSecRepIndex | read-only | mandatory | The secure port repeater index. This is the first of three indexes into the mrmSecurePortTable. |
| 1.3.6.1.4.1.43.10.8.6.1.1.2 | ColumnmrmSecSlotIndex | read-only | mandatory | The secure port slot index. This is the second of three indexes into the mrmSecurePortTable. |
| 1.3.6.1.4.1.43.10.8.6.1.1.3 | ColumnmrmSecPortIndex | read-only | mandatory | The secure port port index. This is the third of three indexes into the mrmSecurePortTable. |
| 1.3.6.1.4.1.43.10.8.6.1.1.5 | ColumnmrmSecPortState | read-only | mandatory | Attribute to determine the current security status of a port. This attribute is used by the security trap to identify the reason for the trap. The range of val… |
| 1.3.6.1.4.1.43.10.8.6.1.1.6 | ColumnmrmSecNTKState | read-write | mandatory | Attribute to determine whether the Need to Know feature is enabled on the secure Repeater Line Card. The range of values that are valid for this object are 1 o… |
| 1.3.6.1.4.1.43.10.8.6.1.1.7 | ColumnmrmSecBroadcastState | read-write | mandatory | Attribute to determine whether broadcasts are allowed or not allowed to be transmitted. 1 other 2 Broadcasts are not allowed 3 Broadcasts are allowed It is onl… |
| 1.3.6.1.4.1.43.10.8.6.1.1.8 | ColumnmrmSecMulticastState | read-write | mandatory | Attribute to determine whether multicasts are allowed or not allowed to be transmitted. 1 other 2 Multicasts are not allowed 3 Multicasts are allowed It is onl… |
| 1.3.6.1.4.1.43.10.8.6.1.1.9 | ColumnmrmSecLearnMode | read-write | mandatory | Attribute to determine the learning mode of the secure repeater line card. The range of values that are valid for this object are 1 no learning, the address is… |
| 1.3.6.1.4.1.43.10.8.6.1.1.10 | ColumnmrmSecReportMode | read-write | mandatory | Attribute to determine the reporting mode of the secure repeater port. The range of values that are valid for this object are 1 Not in applicable learn state 2… |
| 1.3.6.1.4.1.43.10.8.6.1.1.11 | ColumnmrmSecMACAddress | read-write | mandatory | The MAC address in use by the secure repeater port. |
| 1.3.6.1.4.1.43.10.8.6.1.1.12 | ColumnmrmSecRowStatus | read-write | mandatory | This parameter must be set to under-modification before any changes are made to an existing configuration. Changes are not applied until this parameter is set … |
| 1.3.6.1.4.1.43.10.9 | NodeendStation | |||
| 1.3.6.1.4.1.43.10.9.1 | ScalaresDatabaseState | read-write | mandatory | This parameter is normally set to 'NO-CHANGE'. When any change is made to the database the value of this parameter becomes 'MODIFIED'. It will remain in this s… |
| 1.3.6.1.4.1.43.10.9.2 | ScalaresDatabaseFlush | write-only | mandatory | This parameter clears the End Station Database |
| 1.3.6.1.4.1.43.10.9.3 | TableesTable | not-accessible | mandatory | End Station Table |
| 1.3.6.1.4.1.43.10.9.3.1 | RowesTableEntry | not-accessible | mandatory | The end station database maintains information concerning end-station address information against device port for 802.3 repeater type devices. This table provi… |
| 1.3.6.1.4.1.43.10.9.3.1.1 | ColumnesAddrType | read-only | mandatory | The end station database is capable of storing information for a number of different protocols. Each protocol has it's own addressing format. This parameter al… |
| 1.3.6.1.4.1.43.10.9.3.1.2 | ColumnesAddress | read-only | mandatory | The address information held in this entry of the database. The length and format of the string depends on the address type. For example a MAC address will be … |
| 1.3.6.1.4.1.43.10.9.3.1.3 | ColumnesSlotNumber | read-only | mandatory | Number of unit on which this address was learnt. |
| 1.3.6.1.4.1.43.10.9.3.1.4 | ColumnesPortNumber | read-only | mandatory | Port number of unit on which this address was learnt. |
| 1.3.6.1.4.1.43.10.9.4 | TableesModTable | not-accessible | mandatory | End Station Table ( Modified ) |
| 1.3.6.1.4.1.43.10.9.4.1 | RowesModTableEntry | not-accessible | mandatory | The end station database maintains information concerning end-station address information against device port for 802.3 repeater type devices. This table provi… |
| 1.3.6.1.4.1.43.10.9.4.1.1 | ColumnesModAddrType | read-only | mandatory | The end station database is capable of storing information for a number of different protocols. Each protocol has it's own addressing format. This parameter al… |
| 1.3.6.1.4.1.43.10.9.4.1.2 | ColumnesModAddress | read-only | mandatory | The address information held in this entry of the database. The length and format of the string depends on the address type. For example a MAC address will be … |
| 1.3.6.1.4.1.43.10.9.4.1.3 | ColumnesModSlotNumber | read-only | mandatory | Unit number on which this address was learnt. |
| 1.3.6.1.4.1.43.10.9.4.1.4 | ColumnesModPortNumber | read-only | mandatory | Port number of unit on which this address was learnt. |
| 1.3.6.1.4.1.43.10.9.5 | TableesPortAccessTable | not-accessible | mandatory | End Station Table ( Port Access ) |
| 1.3.6.1.4.1.43.10.9.5.1 | RowesPortAccessEntry | not-accessible | mandatory | The end station database maintains information concerning end-station address information against device port for 802.3 repeater type devices. This table provi… |
| 1.3.6.1.4.1.43.10.9.5.1.2 | ColumnecPortCardNo | read-only | mandatory | Unit part of the identifier for this port. |
| 1.3.6.1.4.1.43.10.9.5.1.3 | ColumnecPortPortNo | read-only | mandatory | Port number on unit of port for which end station information is required. |
| 1.3.6.1.4.1.43.10.9.5.1.4 | ColumnecPortIndex | read-only | mandatory | Each port may have a number of addresses against it. This index allows these various addresses to be distinguished. The only stipulation on this number is that… |
| 1.3.6.1.4.1.43.10.9.5.1.5 | ColumnecPortAddrType | read-only | mandatory | The end station database is capable of storing information for a number of different protocols. Each protocol has it's own addressing format. This parameter id… |
| 1.3.6.1.4.1.43.10.9.5.1.6 | ColumnecPortAddress | read-only | mandatory | The address information held in this entry of the database. The length and format of the string depends on the address type. For example a MAC address will be … |
| 1.3.6.1.4.1.43.10.10 | NodelocalSnmp | |||
| 1.3.6.1.4.1.43.10.10.1 | TabletrapTable | not-accessible | mandatory | The snmp Trap database |
| 1.3.6.1.4.1.43.10.10.1.1 | RowtrapEntry | not-accessible | mandatory | A single snmp Trap entry |
| 1.3.6.1.4.1.43.10.10.1.1.1 | ColumntrapStatus | read-write | mandatory | The Status of the Entry valid(1) or invalid(2), writing invalid(2) will delete the entry from the table |
| 1.3.6.1.4.1.43.10.10.1.1.2 | ColumntrapDestination | read-only | mandatory | The Destination IP Address |
| 1.3.6.1.4.1.43.10.10.1.1.3 | ColumntrapCommunity | read-write | mandatory | SNMP Community to be used to send traps to destination trapDestination |
| 1.3.6.1.4.1.43.10.10.1.1.4 | ColumntrapSubject | read-write | mandatory | SNMP Subject Party used to generate traps to destination trapDestination |
| 1.3.6.1.4.1.43.10.10.1.1.5 | ColumntrapCategory | read-write | mandatory | 32 Bit Mask indicating which trap categories trapDestination is interested in |
| 1.3.6.1.4.1.43.10.10.1.1.6 | ColumntrapThrottle | read-write | mandatory | The Maximum rate at which that trapDestination is willing to receive traps, specified as the minimum interval in milliseconds between traps. A value of zero in… |
| 1.3.6.1.4.1.43.10.11 | Nodemanager | |||
| 1.3.6.1.4.1.43.10.12 | Nodeietf8023RptrMgmtTmp | |||
| 1.3.6.1.4.1.43.10.14 | Nodechassis | |||
| 1.3.6.1.4.1.43.10.14.1 | Nodeenclosure | |||
| 1.3.6.1.4.1.43.10.14.1.1 | ScalarenclosureName | read-only | mandatory | A text string describing the chassis that this MIB describes. |
| 1.3.6.1.4.1.43.10.14.1.2 | ScalarenclosureObjId | read-only | mandatory | An OBJECT IDENTIFIER specific to this type of this chassis. |
| 1.3.6.1.4.1.43.10.14.1.3 | ScalarenclosureHardwareVers | read-only | mandatory | The hardware version number of the chassis. This is a string which includes the major and minor revision levels of the hardware. |
| 1.3.6.1.4.1.43.10.14.2 | NodephysicalConfig | |||
| 1.3.6.1.4.1.43.10.14.2.1 | TablephyConfigTable | not-accessible | mandatory | This table specifies the current physical configuration of the chassis. This table defines a chassis to contain a number of physical entities. Each such entity… |
| 1.3.6.1.4.1.43.10.14.2.1.1 | RowphyConfigEntry | not-accessible | mandatory | This is one entry in the Physical Configuration Table. It is indexed by physical location. |
| 1.3.6.1.4.1.43.10.14.2.1.1.1 | ColumnphyLocationType | read-only | mandatory | A chassis contains a number of physical entities such as power supplies and cards. Each physical entity resides at some location. A chassis can contain a numbe… |
| 1.3.6.1.4.1.43.10.14.2.1.1.2 | ColumnphyLocation | read-only | mandatory | A chassis contains a number of physical entities such as power supplies and cards. Each physical entity resides at some location. Some locations are known and … |
| 1.3.6.1.4.1.43.10.14.2.1.1.3 | ColumnphySysObjId | read-only | mandatory | This object is the OBJECT ID of the entity at this location. |
| 1.3.6.1.4.1.43.10.14.2.1.1.4 | ColumnphyServiceType | read-only | mandatory | This object idendifies what kind of entity is present at this location. The value represents a category of entity, for example '802.3 Repeater' or 'power suppl… |
| 1.3.6.1.4.1.43.10.14.2.1.1.5 | ColumnphyEntityType | read-only | mandatory | This object is read in conjunction with service type to uniquely identify the specific physical entity. For example the service type may indicate '802.3 Repeat… |
| 1.3.6.1.4.1.43.10.14.2.1.1.6 | ColumnphyHwVersion | read-only | mandatory | This string identifies the major and minor revision level of the entity at this location. |
| 1.3.6.1.4.1.43.10.14.2.1.1.7 | ColumnphySwVersion | read-only | mandatory | If the entity at this location contains a processor there will be some programme code present. This parameter specifies the version number of that code. The ve… |
| 1.3.6.1.4.1.43.10.14.2.1.1.8 | ColumnphyServiceId | read-only | mandatory | Every chassis is considered as a collection of services. Each service is implemented using the resources of one or more physical entities within the rack. For … |
| 1.3.6.1.4.1.43.10.14.2.1.1.9 | ColumnphyEntityName | read-only | mandatory | This item is a text string describing the entity at this location. |
| 1.3.6.1.4.1.43.10.14.2.1.1.10 | ColumnphyPowerReq | read-only | mandatory | This item takes the +5V and +12V current requirements of the entity and uses the values to obtain a power consumption requirement for the entity. A power suppl… |
| 1.3.6.1.4.1.43.10.14.2.1.1.11 | ColumnphyNumberOfPorts | read-only | mandatory | This object contains the number of physical, external ports this entity is known to have. Note this value only applies to entities that communicate with the ma… |
| 1.3.6.1.4.1.43.10.14.2.1.1.12 | ColumnphyLampTest | write-only | mandatory | This object allows a visual test to be performed on entities contained in the rack. The state will be recorded against the card even if that entity does not ac… |
| 1.3.6.1.4.1.43.10.14.2.1.1.13 | ColumnphyEntityState | read-only | mandatory | Each entity in the chassis has a basic state independent of what function that entity performs within the chassis. If the agent cannot determine the state of a… |
| 1.3.6.1.4.1.43.10.14.2.1.1.14 | ColumnphyAction | write-only | mandatory | This parameter allows a number of actions to be defined for cards in a chassis. Currently only one action is defined: reset. Invoking this operation will reset… |
| 1.3.6.1.4.1.43.10.14.2.2 | TablephyLimits | not-accessible | mandatory | The physical config table describes the chassis as a number of physical entities, each of which has some physical location. This table defines the number of ph… |
| 1.3.6.1.4.1.43.10.14.2.2.1 | RowphyLimitEntry | not-accessible | mandatory | This entry provides information on the number of physical locations present in this chassis for the specified type of location. Practically this is interpreted… |
| 1.3.6.1.4.1.43.10.14.2.2.1.1 | ColumnphyLimLocationType | read-only | mandatory | A chassis contains a number of physical entities such as power supplies and cards. Each physical entity resides at some location. A chassis can contain a numbe… |
| 1.3.6.1.4.1.43.10.14.2.2.1.2 | ColumnphyLimLimit | read-only | mandatory | A chassis contains a number of physical entities such as power supplies and cards. Each physical entity resides at some location. A chassis can contain a numbe… |
| 1.3.6.1.4.1.43.10.14.2.3 | ScalarfrontPanelDisplayMessage | read-write | mandatory | This is a string which may be user-defined for display on the lower line of the front panel display. |
| 1.3.6.1.4.1.43.10.14.3 | NodelogicalConfig | |||
| 1.3.6.1.4.1.43.10.14.3.1 | TableserviceTable | not-accessible | mandatory | An MSH chassis is logically comprised of a number of services, e.g. a repeater, bridge etc. Each service is implemented by one or more physical entities. This … |
| 1.3.6.1.4.1.43.10.14.3.1.1 | RowserviceEntry | not-accessible | mandatory | This is an entry in the Service Table which is indexed by the Service Index for that service. |
| 1.3.6.1.4.1.43.10.14.3.1.1.1 | ColumnserviceId | read-only | mandatory | This is a number representing the service in the rack. This id can be used to reference the service elsewhere in the MIB. There are several conventions used to… |
| 1.3.6.1.4.1.43.10.14.3.1.1.2 | ColumnserviceName | read-only | mandatory | This is a text string describing the service at a particular Service Index. |
| 1.3.6.1.4.1.43.10.14.3.1.1.3 | ColumnserviceReset | write-only | mandatory | This action will reset all the cards that belong to this service. |
| 1.3.6.1.4.1.43.10.14.3.2 | TableaddressTable | not-accessible | mandatory | An MSH chassis contains a number of services. Each service is implemented by one or more cards. A number of services are 'intelligent' in that they communicate… |
| 1.3.6.1.4.1.43.10.14.3.2.1 | RowaddressTableEntry | not-accessible | mandatory | text |
| 1.3.6.1.4.1.43.10.14.3.2.1.1 | ColumnmgmtServiceId | read-only | mandatory | Identifies the service for which this row provides address information. |
| 1.3.6.1.4.1.43.10.14.3.2.1.2 | ColumnmgmtSubIndex | read-only | mandatory | Used to distinguish between multiple addresses for a service in the chassis. |
| 1.3.6.1.4.1.43.10.14.3.2.1.3 | ColumnmgmtAddressType | read-only | mandatory | A card in the chassis can have several addresses, either because of multiple stacks and/or for each relevant level in the stack(s). Each relevant address is re… |
| 1.3.6.1.4.1.43.10.14.3.2.1.4 | ColumnmgmtAddress | read-only | mandatory | The address as block of bytes. An IP address would occupy 4 bytes and a MAC address 6 bytes. |
| 1.3.6.1.4.1.43.10.14.3.3 | TablefacilityTable | not-accessible | mandatory | The MSH chassis can simultaneously maintain a number of different sub-networks. Examples of these are the independent repeaters and a number of Token Rings. Th… |
| 1.3.6.1.4.1.43.10.14.3.3.1 | RowfacilityEntry | not-accessible | mandatory | This is an entry in the Facility Table for a particular slot. There may be more than one entry per slot, each entry being distinguished by FacilityIndex. |
| 1.3.6.1.4.1.43.10.14.3.3.1.1 | ColumnfcSlotNumber | read-only | mandatory | Allows access to the table for a particular card. One can use this in conjunction with get-next to read all the facility associations for a particular card. |
| 1.3.6.1.4.1.43.10.14.3.3.1.2 | ColumnfcFacilityIndex | read-only | mandatory | Each card may have multiple entries in the Facility Table. This object provides the means of uniquely identifying each of these entries. Note: It is a conventi… |
| 1.3.6.1.4.1.43.10.14.3.3.1.3 | ColumnfcType | read-only | mandatory | Each entry in the facility table represents an association between a physical module and one of the facilities provided by the particular configuration of this… |
| 1.3.6.1.4.1.43.10.14.3.3.1.4 | ColumnfcConnection | read-write | mandatory | This object identifies the current assignment of this attachment point in this card. The legal values of this object depends on the type card. Writing an illeg… |
| 1.3.6.1.4.1.43.10.15 | NodemrmResilience | |||
| 1.3.6.1.4.1.43.10.15.1 | TableresTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.10.15.1.1 | RowresTableEntry | not-accessible | mandatory | An MSH may be configured to contain a number of 'resilient pairs'. These are 802.3 point to point connections, e.g. UTP, that allow two repeaters to be connect… |
| 1.3.6.1.4.1.43.10.15.1.1.1 | ColumnresRepeater | read-only | mandatory | A resilient pair must be attached to one of the repeaters in the chassis. This is part of the index value required to access this table. |
| 1.3.6.1.4.1.43.10.15.1.1.2 | ColumnresMainSlot | read-only | mandatory | This is the second key in the index to this table. This is the slot number of the main port in this pair. |
| 1.3.6.1.4.1.43.10.15.1.1.3 | ColumnresMainPort | read-only | mandatory | This is the final, key used to index entries in this table. It is the port number of the main port in the pair. |
| 1.3.6.1.4.1.43.10.15.1.1.4 | ColumnresMainState | read-only | mandatory | Each port in a pair is constantly monitored for signs of failure. Failure information is used to automatically change the active port from main to standby or v… |
| 1.3.6.1.4.1.43.10.15.1.1.5 | ColumnresStandbySlot | read-write | mandatory | This is the slot number of the standby port for this pair. The port must be present on the same repeater as the main port and so this information is not duplic… |
| 1.3.6.1.4.1.43.10.15.1.1.6 | ColumnresStandbyPort | read-write | mandatory | This is the port number of the standby port. |
| 1.3.6.1.4.1.43.10.15.1.1.7 | ColumnresStandbyState | read-only | mandatory | Each port in a pair is constantly monitored for signs of failure. Failure information is used to automatically change the active port from main to standby or v… |
| 1.3.6.1.4.1.43.10.15.1.1.8 | ColumnresPairState | read-only | mandatory | Each row in the table is in one of two states, 'invalid' or 'operational'. If the state is 'invalid', the resilient pair represented by this row is not active.… |
| 1.3.6.1.4.1.43.10.15.1.1.9 | ColumnresPairModificationStatus | read-write | mandatory | This parameter must be set to under-modification before any changes are made to an existing configuration. Changes are not applied until this parameter is set … |
| 1.3.6.1.4.1.43.10.15.1.1.10 | ColumnresPairAction | write-only | mandatory | This is object allows the state of a resilient pair to be modified. The create operation configures the resilient port from this table entry. The delete operat… |
| 1.3.6.1.4.1.43.10.15.1.1.11 | ColumnresPairEnable | read-write | mandatory | This parameter controls whether the resilient pair is enabled or not. In the disabled state , both ports of the resilient pair are disabled. The default value … |
| 1.3.6.1.4.1.43.10.15.2 | TableresStandbyMapTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.10.15.2.1 | RowresStandbyMapTableEntry | not-accessible | mandatory | This table is read-only. If provides shortcut information to allow for the translation of a port number to a corresponding main port number. This value can the… |
| 1.3.6.1.4.1.43.10.15.2.1.1 | ColumnresSbRepeater | read-only | mandatory | The repeater index of the port being accessed. This is the first of three indices on this table. |
| 1.3.6.1.4.1.43.10.15.2.1.2 | ColumnresSbSlot | read-only | mandatory | Second index on this table. |
| 1.3.6.1.4.1.43.10.15.2.1.3 | ColumnresSbPort | read-only | mandatory | Third index on this table. |
| 1.3.6.1.4.1.43.10.15.2.1.4 | ColumnresSbType | read-only | mandatory | This attribute specifies whether the port indexed is a main or standby port in the resilient pair table. If the port is neither then there will not be a row in… |
| 1.3.6.1.4.1.43.10.15.2.1.5 | ColumnresSbMainSlot | read-only | mandatory | This is the slot number of the main port for the pair in which the indexed port participates. NOTE if the index port is the main port of a pair (resSbType is '… |
| 1.3.6.1.4.1.43.10.15.2.1.6 | ColumnresSbMainPort | read-only | mandatory | This is the port number of the main port for the pair in which the indexed port participates. NOTE if the index port is the main port of a pair (resSbType is '… |
| 1.3.6.1.4.1.43.10.15.3 | ScalarresFlushTable | write-only | mandatory | This parameter causes all entries in the resilience table to be flushed. Flushing the resilience table does not affect the state of any of the resilient links … |
| 1.3.6.1.4.1.43.10.16 | NodetokenRing | |||
| 1.3.6.1.4.1.43.10.17 | NodemultiRepeater | |||
| 1.3.6.1.4.1.43.10.17.1 | NodemrmBasicPackage | |||
| 1.3.6.1.4.1.43.10.17.1.1 | NodemrmBasCardPackage | |||
| 1.3.6.1.4.1.43.10.17.1.1.1 | TablemrmCardTable | not-accessible | mandatory | Table of descriptive and status information about the groups of ports. |
| 1.3.6.1.4.1.43.10.17.1.1.1.1 | RowmrmCardEntry | not-accessible | mandatory | An entry in the table, containing information about a single group of ports. |
| 1.3.6.1.4.1.43.10.17.1.1.1.1.1 | ColumnmrmCardServiceId | read-only | mandatory | This identifies one of the repeaters within the chassis as the target of a request. |
| 1.3.6.1.4.1.43.10.17.1.1.1.1.2 | ColumnmrmCardIndex | read-only | mandatory | This object identifies the card within the repeater for which this entry contains information. |
| 1.3.6.1.4.1.43.10.17.1.1.1.1.3 | ColumnmrmCardPortCapacity | read-only | mandatory | The mrmCardPortCapacity is the number of ports that can be contained within the group. Valid range is 1-1024. Within each group, the ports are uniquely numbere… |
| 1.3.6.1.4.1.43.10.17.1.1.1.1.4 | ColumnmrmCardTest | read-write | mandatory | An object that allows the user to test the operation of a card. Writing test(2) to this object forces the card to perform a disruptive test to determine if the… |
| 1.3.6.1.4.1.43.10.17.1.1.1.1.5 | ColumnmrmCardDOBPorts | read-only | mandatory | MSH Repeater Cards have the ability to disable ports at power up or reset. Ports configured in this way are useful for configuring resilient links because they… |
| 1.3.6.1.4.1.43.10.17.1.2 | NodemrmBasPortPackage | |||
| 1.3.6.1.4.1.43.10.17.1.2.1 | TablemrmPortTable | not-accessible | mandatory | Table of descriptive and status information about the ports. |
| 1.3.6.1.4.1.43.10.17.1.2.1.1 | RowmrmPortEntry | not-accessible | mandatory | An entry in the table, containing information about a single port. |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.1 | ColumnmrmPortServiceId | read-only | mandatory | This object identifies the repeater which this entry contains information. |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.2 | ColumnmrmPortCardIndex | read-only | mandatory | This object identifies the group containing the port for which this entry contains information. |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.3 | ColumnmrmPortIndex | read-only | mandatory | This object identifies the port within the group for which this entry contains information. This value can never be greater than mrmCardPortCapacity for the as… |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.4 | ColumnmrmPortInterfaceType | read-only | mandatory | This object specifies the type of electrical interface made available at the interface to the card for this port. The interface does not necessarily specify wh… |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.5 | ColumnmrmPortConnectorType | read-only | mandatory | This specifies the type of the physical connector through which one would attach to this card. This is distinct from the media type. For example UTP may be con… |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.6 | ColumnmrmPortAdminStatus | read-write | mandatory | Setting this object to disabled(2) disables the port. A disabled port neither transmits nor receives. Once disabled, a port must be explicitly enabled to resto… |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.7 | ColumnmrmPortAutoPartitionState | read-only | mandatory | The autoPartitionState flag indicates whether the port is currently partitioned by the repeater's auto-partition protection. The conditions that cause port par… |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.8 | ColumnmrmPortLinkState | read-only | mandatory | This object reflects the presence or absence of signal on this port. The signal may be either light in the case of fiber, or general link present in the case o… |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.9 | ColumnmrmPortBootState | read-only | mandatory | A repeater port may be enabled or disabled after a reset. This parameter indicates the default for this port. |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.10 | ColumnmrmPortESTFilter | read-write | mandatory | This attribute determines whether and which address information is extracted from packets received on a port and forwarded to the end station database. It is r… |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.11 | ColumnmrmPortPartitionEvent | read-write | mandatory | Specifies whether a trap should be sent if the port partition state changes. |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.12 | ColumnmrmPortLinkStateEvent | read-write | mandatory | Specifies whether a trap should be sent if the link state changes. |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.13 | ColumnmrmPortSecurityAvailable | read-only | mandatory | Specifies whether security is an available feature on this port. Only ports that have this feature available can have an entry in the repeater security table. |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.14 | ColumnmrmPortLinkPulse | read-write | mandatory | This attribute determines if link pulse generating and monitoring is enabled or disabled for a 10BaseT port. The attribute may take the values of enabled (stan… |
| 1.3.6.1.4.1.43.10.17.2 | NodemrmMonitorPackage | |||
| 1.3.6.1.4.1.43.10.17.2.1 | NodemrmMonRepeaterPackage | |||
| 1.3.6.1.4.1.43.10.17.2.1.1 | TablemrmMonitorRepTable | not-accessible | mandatory | Table of performance and error statistics for the ports. |
| 1.3.6.1.4.1.43.10.17.2.1.1.1 | RowmrmMonitorRepEntry | not-accessible | mandatory | This table provides statistical and control information concerning the entire repeater. |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.1 | ColumnmrmMonRepServiceId | read-only | mandatory | This parameter is used as the index in this table. A modular chassis contains potentially many repeater services. Each repeater service contains a number of ca… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.2 | ColumnmrmMonRepReadableFrames | read-only | mandatory | This counter is incremented by one for each frame whose OctetCount is greater than or equal to minFrameSize and less than or equal to maxFrameSize and for whic… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.3 | ColumnmrmMonRepUnicastFrames | read-only | mandatory | This counter is incremented by one for each readable frame seen by the Repeater that is addressed to a unicast (non Card) address. |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.4 | ColumnmrmMonRepMulticastFrames | read-only | mandatory | This counter is incremented by one for each readable frame seen by the Repeater that is addressed to a multicast (non broadcast) address. |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.5 | ColumnmrmMonRepBroadcastFrames | read-only | mandatory | This counter is incremented by one for each readable frame seen by the Repeater that is addressed to the broadcast address ffffffffffff. |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.6 | ColumnmrmMonRepReadableOctets | read-only | mandatory | This counter is incremented by the octet count for each readable frame received by the repeater. NOTE: This counter does not really exist. It is calculated by … |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.7 | ColumnmrmMonRepUnicastOctets | read-only | mandatory | This object is the number of octets contained in valid frames that have been received on this port in which the destination field was a unicast address. The ap… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.8 | ColumnmrmMonRepMulticastOctets | read-only | mandatory | This object is the number of octets contained in valid frames that have been received on this port in which the destination was a multicast address. The approx… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.9 | ColumnmrmMonRepBroadcastOctets | read-only | mandatory | This object is the number of octets contained in valid frames that have been received on this port in which the destination was the broadcast address fffffffff… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.10 | ColumnmrmMonRepFCSErrors | read-only | mandatory | This counter is incremented by one for each frame with an FCS error that does not have a framing error and which is of legal frame size received by the repeate… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.11 | ColumnmrmMonRepAlignmentErrors | read-only | mandatory | This counter is incremented by one for each frame with an FCS error that does have a framing error and which is of legal frame size received by the repeater. N… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.12 | ColumnmrmMonRepFrameTooLongs | read-only | mandatory | This counter is incremented by one for each frame whose octet count is greater than the max frame size that is received by the repeater. NOTE: This counter doe… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.13 | ColumnmrmMonRepShortEvents | read-only | mandatory | This counter is incremented by one for each carrier event whose duration is less than short event max time that is detected by the repeater. NOTE: This counter… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.14 | ColumnmrmMonRepRunts | read-only | mandatory | This counter is incremented by one for each carrier event whose duration is greater than short event max time and less than valid packet min time and which doe… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.15 | ColumnmrmMonRepTxCollisions | read-only | mandatory | This counter is incremented by one for any CarrierEvent signal on any port of this repeater for which the CollisionEvent signal on this port is asserted. The a… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.16 | ColumnmrmMonRepLateEvents | read-only | mandatory | This counter is incremented by one each time a collisions occurs after valid packet min time, a late event is counted as both a collision and as a late event. … |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.17 | ColumnmrmMonRepVeryLongEvents | read-only | mandatory | This counter is incremented by one each time a carrier event occurs whose duration is greater than the MAU Jabber Lockup Protection time. NOTE: This counter do… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.18 | ColumnmrmMonRepDataRateMismatches | read-only | mandatory | This counter is incremented by one each time a packet has been received by this repeater with the data rate detectably mismatched from the local frequency. NOT… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.19 | ColumnmrmMonRepAutoPartitions | read-only | mandatory | This counter is incremented by one each time the repeater has automatically partitioned any port. NOTE: This counter does not really exist. It is calculated by… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.20 | ColumnmrmMonRepTotalErrors | read-only | mandatory | The total number of errors which have occurred on all ports on all groups of this repeater. This counter is the summation of the values of the mrmMonCardTotalE… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.21 | ColumnmrmMonRepBound0 | read-only | mandatory | This object is a summation of the number of frames (including error frames) with a length of 64 octets which were received by each port on every card of this r… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.22 | ColumnmrmMonRepBound1 | read-only | mandatory | This object is a summation of the number of frames (including error frames) with a length of between 65 and 127 octets inclusive which were received by each po… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.23 | ColumnmrmMonRepBound2 | read-only | mandatory | This object is a summation of the number of frames (including error frames) with a length of between 128 and 255 octets inclusive which were received by each p… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.24 | ColumnmrmMonRepBound3 | read-only | mandatory | This object is a summation of the number of frames (including error frames) with a length of between 256 and 511 octets inclusive which were received by each p… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.25 | ColumnmrmMonRepBound4 | read-only | mandatory | This object is a summation of the number of frames (including error frames) with a length of between 512 and 1023 octets inclusive which were received by each … |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.26 | ColumnmrmMonRepBound5 | read-only | mandatory | This object is a summation of the number of frames (including error frames) with a length of between 1024 and 1518 octets inclusive which were received by each… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.27 | ColumnmrmMonRepAction | write-only | mandatory | This object allows repeater stats specific actions to be implemented. There is only one action currently defined, 'clearCounters'. Writing this value to a repe… |
| 1.3.6.1.4.1.43.10.17.2.2 | NodemrmMonCardPackage | |||
| 1.3.6.1.4.1.43.10.17.2.2.1 | TablemrmMonitorCardTable | not-accessible | mandatory | This table contains parameters about the various repeater cards within the chassis. The table is indexed using the 'serviceIndex' for the repeater and the slot… |
| 1.3.6.1.4.1.43.10.17.2.2.1.1 | RowmrmMonitorCardEntry | not-accessible | mandatory | Status information and control variables for the ports on a single card. |
| 1.3.6.1.4.1.43.10.17.2.2.1.1.1 | ColumnmrmMonCardServiceId | read-only | mandatory | This parameter is used as the first of two indices in this table. A modular chassis contains potentially many repeater services. Each repeater service contains… |
| 1.3.6.1.4.1.43.10.17.2.2.1.1.2 | ColumnmrmMonCardIndex | read-only | mandatory | This is the second part of the key on this table. Having selected one of the repeaters within the chassis it is necessary to identify the card within that repe… |
| 1.3.6.1.4.1.43.10.17.2.2.1.1.3 | ColumnmrmMonCardReadableFrames | read-only | mandatory | This counter is incremented by one for each frame whose OctetCount is greater than or equal to minFrameSize and less than or equal to maxFrameSize and for whic… |
| 1.3.6.1.4.1.43.10.17.2.2.1.1.4 | ColumnmrmMonCardUnicastFrames | read-only | mandatory | This counter is incremented by one for each readable frame seen by the Card that is addressed to a unicast (non Card) address. |
| 1.3.6.1.4.1.43.10.17.2.2.1.1.5 | ColumnmrmMonCardMulticastFrames | read-only | mandatory | This counter is incremented by one for each readable frame seen by the Card that is addressed to a multicast (non broadcast) address. |
| 1.3.6.1.4.1.43.10.17.2.2.1.1.6 | ColumnmrmMonCardBroadcastFrames | read-only | mandatory | This counter is incremented by one for each readable frame seen by the Card that is addressed to the broadcast address ffffffffffff. |
| 1.3.6.1.4.1.43.10.17.2.2.1.1.7 | ColumnmrmMonCardReadableOctets | read-only | mandatory | This counter is incremented by the octet count for each readable frame received by any port on this card. |
| 1.3.6.1.4.1.43.10.17.2.2.1.1.8 | ColumnmrmMonCardUnicastOctets | read-only | mandatory | This object is the number of octets contained in valid frames that have been received on this port in which the destination field was a unicast address. The ap… |
| 1.3.6.1.4.1.43.10.17.2.2.1.1.9 | ColumnmrmMonCardMulticastOctets | read-only | mandatory | This object is the number of octets contained in valid frames that have been received on this port in which the destination was a multicast address. The approx… |
| 1.3.6.1.4.1.43.10.17.2.2.1.1.10 | ColumnmrmMonCardBroadcastOctets | read-only | mandatory | This object is the number of octets contained in valid frames that have been received on this port in which the destination was the broadcast address fffffffff… |
| 1.3.6.1.4.1.43.10.17.2.2.1.1.11 | ColumnmrmMonCardFCSErrors | read-only | mandatory | This counter is incremented by one for each frame with an FCS error that does not have a framing error and which is of legal frame size. |
| 1.3.6.1.4.1.43.10.17.2.2.1.1.12 | ColumnmrmMonCardAlignmentErrors | read-only | mandatory | This counter is incremented by one for each frame with an FCS error that does have a framing error and which is of legal frame size . |
| 1.3.6.1.4.1.43.10.17.2.2.1.1.13 | ColumnmrmMonCardFrameTooLongs | read-only | mandatory | This counter is incremented by one for each frame whose octet count is greater than the max frame size that is received by the repeater. |
| 1.3.6.1.4.1.43.10.17.2.2.1.1.14 | ColumnmrmMonCardShortEvents | read-only | mandatory | This counter is incremented by one for each carrier event whose duration is less than short event max time that is detected. |
| 1.3.6.1.4.1.43.10.17.2.2.1.1.15 | ColumnmrmMonCardRunts | read-only | mandatory | This counter is incremented by one for each carrier event whose duration is greater than short event max time and less than valid packet min time and which doe… |
| 1.3.6.1.4.1.43.10.17.2.2.1.1.16 | ColumnmrmMonCardLateEvents | read-only | mandatory | This counter is incremented by one each time a collisions occurs after valid packet min time, a late event is counted as both a collision and as a late event. |
| 1.3.6.1.4.1.43.10.17.2.2.1.1.17 | ColumnmrmMonCardVeryLongEvents | read-only | mandatory | This counter is incremented by one each time a carrier event occurs whose duration is greater than the MAU Jabber Lockup Protection time. |
| 1.3.6.1.4.1.43.10.17.2.2.1.1.18 | ColumnmrmMonCardDataRateMismatches | read-only | mandatory | This counter is incremented by one each time a packet has been received with the data rate detectably mismatched from the local frequency. |
| 1.3.6.1.4.1.43.10.17.2.2.1.1.19 | ColumnmrmMonCardAutoPartitions | read-only | mandatory | This counter is incremented by one each time the repeater has automatically partitioned any port. |
| 1.3.6.1.4.1.43.10.17.2.2.1.1.20 | ColumnmrmMonCardTotalErrors | read-only | mandatory | The total number of errors which have occurred on all ports of this card. This counter is the summation of the values of other error counters (for each port), … |
| 1.3.6.1.4.1.43.10.17.2.2.1.1.21 | ColumnmrmMonCardBound0 | read-only | mandatory | This object is a summation of the number of frames (including error frames) with a length of 64 octets which were received by each port on this card. |
| 1.3.6.1.4.1.43.10.17.2.2.1.1.22 | ColumnmrmMonCardBound1 | read-only | mandatory | This object is a summation of the number of frames (including error frames) with a length of between 65 and 127 octets inclusive which were received by each po… |
| 1.3.6.1.4.1.43.10.17.2.2.1.1.23 | ColumnmrmMonCardBound2 | read-only | mandatory | This object is a summation of the number of frames (including error frames) with a length of between 128 and 255 octets inclusive which were received by each p… |
| 1.3.6.1.4.1.43.10.17.2.2.1.1.24 | ColumnmrmMonCardBound3 | read-only | mandatory | This object is a summation of the number of frames (including error frames) with a length of between 256 and 511 octets inclusive which were received by each p… |
| 1.3.6.1.4.1.43.10.17.2.2.1.1.25 | ColumnmrmMonCardBound4 | read-only | mandatory | This object is a summation of the number of frames (including error frames) with a length of between 512 and 1023 octets inclusive which were received by each … |
| 1.3.6.1.4.1.43.10.17.2.2.1.1.26 | ColumnmrmMonCardBound5 | read-only | mandatory | This object is a summation of the number of frames (including error frames) with a length of between 1024 and 1518 octets inclusive which were received by each… |
| 1.3.6.1.4.1.43.10.17.2.2.1.1.27 | ColumnmrmMonCardClearCounters | write-only | mandatory | This attribute allows all counters on this Card to be cleared. |
| 1.3.6.1.4.1.43.10.17.2.3 | NodemrmMonPortPackage | |||
| 1.3.6.1.4.1.43.10.17.2.3.1 | TablemrmMonitorPortTable | not-accessible | mandatory | Table of performance and error statistics for the ports. |
| 1.3.6.1.4.1.43.10.17.2.3.1.1 | RowmrmMonitorPortEntry | not-accessible | mandatory | Performance and error statistics for a single port. |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.1 | ColumnmrmMonPortServiceId | read-only | mandatory | This parameter selects one of the repeaters within the chassis. This forms the first, most significant index column. Having selected a repeater one must select… |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.2 | ColumnmrmMonPortCardIndex | read-only | mandatory | This attribute uniquely identifies this Card within the repeater, it is part of the index for the port table. |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.3 | ColumnmrmMonPortIndex | read-only | mandatory | This attribute uniquely identifies this port within the Card, it is part of the index for the port table. |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.4 | ColumnmrmMonPortReadableFrames | read-only | mandatory | This object is the number of frames of valid frame length that have been received on this port. This counter is incremented by one for each frame received on t… |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.5 | ColumnmrmMonPortUnicastFrames | read-only | mandatory | This counter is incremented by one for each readable frame seen by the Card that is addressed to a unicast (non Card) address. |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.6 | ColumnmrmMonPortMulticastFrames | read-only | mandatory | This counter is incremented by one for each readable frame seen by the Card that is addressed to a multicast (non broadcast) address. |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.7 | ColumnmrmMonPortBroadcastFrames | read-only | mandatory | This counter is incremented by one for each readable frame seen by the Card that is addressed to the broadcast address. |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.8 | ColumnmrmMonPortReadableOctets | read-only | mandatory | This object is the number of octets contained in valid frames that have been received on this port. This counter is incremented by OctetCount for each frame re… |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.9 | ColumnmrmMonPortUnicastOctets | read-only | mandatory | This object is the number of octets contained in valid frames that have been received on this port in which the destination field was a unicast address. The ap… |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.10 | ColumnmrmMonPortMulticastOctets | read-only | mandatory | This object is the number of octets contained in valid frames that have been received on this port in which the destination was a multicast address. The approx… |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.11 | ColumnmrmMonPortBroadcastOctets | read-only | mandatory | This object is the number of octets contained in valid frames that have been received on this port in which the destination was the broadcast address fffffffff… |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.12 | ColumnmrmMonPortFCSErrors | read-only | mandatory | This counter is incremented by one for each frame received on this port with the FCSError signal asserted and the FramingError and CollisionEvent signals deass… |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.13 | ColumnmrmMonPortAlignmentErrors | read-only | mandatory | This counter is incremented by one for each frame received on this port with the FCSError and FramingError signals asserted and CollisionEvent signal deasserte… |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.14 | ColumnmrmMonPortFrameTooLongs | read-only | mandatory | This counter is incremented by one for each frame received on this port whose OctetCount is greater than maxFrameSize (Ref: 4.4.2.1, IEEE 802.3 Std). If this p… |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.15 | ColumnmrmMonPortShortEvents | read-only | mandatory | This counter is incremented by one for each CarrierEvent on this port with ActivityDuration less than ShortEventMaxTime. ShortEventMaxTime is greater than 74 b… |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.16 | ColumnmrmMonPortRunts | read-only | mandatory | This counter is incremented by one for each CarrierEvent on this port that meets one of the following two conditions. Only one test need be made. a) The Activi… |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.17 | ColumnmrmMonPortCollisions | read-only | mandatory | This counter is incremented by one each time a collision is detected on this port or when the CollisionEvent signal is asserted on this port. The approximate m… |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.18 | ColumnmrmMonPortLateEvents | read-only | mandatory | This counter is incremented by one for each CarrierEvent on this port in which the CollIn(X) variable transitions to the value SQE (Ref: 9.6.6.2, IEEE 802.3 St… |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.19 | ColumnmrmMonPortVeryLongEvents | read-only | mandatory | This counter is incremented by one for each CarrierEvent on this port whose ActivityDuration is greater than the MAU Jabber Lockup Protection timer TW3 (Ref: 9… |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.20 | ColumnmrmMonPortDataRateMismatches | read-only | mandatory | This counter is incremented by one for each frame received on this port that meets all of the following conditions: a) The CollisionEvent signal is not asserte… |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.21 | ColumnmrmMonPortAutoPartitions | read-only | mandatory | This counter is incremented by one for each time the repeater has automatically partitioned this port. The conditions that cause port partitioning are specifie… |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.22 | ColumnmrmMonPortTotalErrors | read-only | mandatory | The total number of errors which have occurred on this port. This counter is the summation of the values of other error counters (for the same port), namely: F… |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.23 | ColumnmrmMonPortBound0 | read-only | mandatory | This object is the number of frames (including error frames) with a length of 64 octets which were received on this port. |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.24 | ColumnmrmMonPortBound1 | read-only | mandatory | This object is the number of frames (including error frames) with a length of between 65 and 127 octets inclusive which were received on this port. |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.25 | ColumnmrmMonPortBound2 | read-only | mandatory | This object is the number of frames (including error frames) with a length of between 128 and 255 octets inclusive which were received on this port. |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.26 | ColumnmrmMonPortBound3 | read-only | mandatory | This object is the number of frames (including error frames) with a length of between 256 and 511 octets inclusive which were received on this port. |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.27 | ColumnmrmMonPortBound4 | read-only | mandatory | This object is the number of frames (including error frames) with a length of between 512 and 1023 octets inclusive which were received on this port. |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.28 | ColumnmrmMonPortBound5 | read-only | mandatory | This object is the number of frames (including error frames) with a length of between 1024 and 1518 octets inclusive which were received on this port. |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.29 | ColumnmrmMonPortBandwidthUsed | read-only | mandatory | This is a high level 'smart MIB' object. This object provides a running average of the bandwidth in use. This value is calculated locally on the agent and so d… |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.30 | ColumnmrmMonPortErrorsPer10000Packets | read-only | mandatory | This is a high level 'smart MIB' object. This object provides a running average of the bandwidth in use. The value of this value is calculated locally on the a… |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.31 | ColumnmrmMonPortClearCounters | write-only | mandatory | This attribute allows all counters on this Port to be cleared. |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.32 | ColumnmrmMonPortLastAddress | read-only | mandatory | This is the last MAC address seen on this port. |
| 1.3.6.1.4.1.43.10.17.2.3.1.1.33 | ColumnmrmMonPortAddressChanges | read-only | mandatory | This is a count of the number of times the MAC address on this port has changed. A high number of changes indicates this is either an inter-repeater link or a … |
| 1.3.6.1.4.1.43.10.17.2.4 | NodemrmMonDummyPackage | |||
| 1.3.6.1.4.1.43.10.17.2.4.1 | ScalartrafficLevel | read-only | mandatory | This is a dummy 'smart MIB' object which is used internally by the agent to provide a running average of the bandwidth in use. It should not be accessed by a m… |
| 1.3.6.1.4.1.43.10.17.2.4.2 | ScalarerrorFrames | read-only | mandatory | This is a dummy 'smart MIB' object which is used internally by the agent to provide a running average of the error rate. It should not be accessed by a managem… |
| 1.3.6.1.4.1.43.11 | NodenetBuilder-mib | |||
| 1.3.6.1.4.1.43.12 | NodelBridgeECS-mib | |||
| 1.3.6.1.4.1.43.13 | NodedeskMan-mib | |||
| 1.3.6.1.4.1.43.13 | NodeheartbeatEvent | Generated at a regular interval to inform the manager this device is still operating and can be reached on the network. | ||
| 1.3.6.1.4.1.43.14 | NodelinkBuilderMSH-mib | |||
| 1.3.6.1.4.1.43.14 | NodelocalManagementUpdate | A local management update trap indicates that the configuration of the device has been modified via the ascii agent. This may be through Telnet or the V24 port. | ||
| 1.3.6.1.4.1.43.14.2 | NodesnmpDot3RpMauMgt | |||
| 1.3.6.1.4.1.43.14.2.1 | NoderpMauBasicGroup | |||
| 1.3.6.1.4.1.43.14.2.1.1 | TablerpMauTable | not-accessible | mandatory | Table of descriptive and status information about the groups of ports. |
| 1.3.6.1.4.1.43.14.2.1.1.1 | RowrpMauEntry | not-accessible | mandatory | An entry in the table, containing information about a single group of ports. |
| 1.3.6.1.4.1.43.14.2.1.1.1.1 | ColumnrpMauGroupIndex | read-only | mandatory | This variable uniquely identifies the repeater group that contains the port to which is connected the MAU for which this entry contains information. |
| 1.3.6.1.4.1.43.14.2.1.1.1.2 | ColumnrpMauPortIndex | read-only | mandatory | This variable uniquely identifies the repeater port to which is connected the MAU for which this entry contains information. |
| 1.3.6.1.4.1.43.14.2.1.1.1.3 | ColumnrpMauIndex | read-only | mandatory | This variable uniquely identifies the MAU for which this entry contains information. |
| 1.3.6.1.4.1.43.14.2.1.1.1.4 | ColumnrpMauType | read-only | mandatory | A value that identifies the 10 Mb/s baseband MAU type. The enumeration of the type is such that the value matches the section number of the IEEE 802.3 standard… |
| 1.3.6.1.4.1.43.14.2.1.1.1.5 | ColumnrpMauAdminState | read-write | mandatory | The administrative state of the MAU. This object may be implemented as a read-only object by those agents and MAUs that do not implement software control of th… |
| 1.3.6.1.4.1.43.14.2.1.1.1.6 | ColumnrpMauMediaAvailable | read-only | mandatory | If the MAU is a link or fiber type (FOIRL, 10BASE-T, 10BASE-F) then this is equivalent to the link integrity/low light state. For an AUI or coax MAU this indic… |
| 1.3.6.1.4.1.43.14.2.1.1.1.7 | ColumnrpMauLostMedias | read-only | mandatory | A count of the number of times that rpMauMediaAvailable for this MAU instance leaves the state available(3). Implementation of this object is mandatory for MAU… |
| 1.3.6.1.4.1.43.14.2.1.1.1.8 | ColumnrpMauJabberState | read-only | mandatory | If the MAU is in jabber state the attribute is set to the jabbering(4) value. This object returns the value other(1) for MAU type AUI. |
| 1.3.6.1.4.1.43.14.2.1.1.1.9 | ColumnrpMauJabbers | read-only | mandatory | A count of the number of times that rpMauJabberState for this MAU instance enters the state jabbering(4). |
| 1.3.6.1.4.1.43.15 | NodelinkBuilderFMS-mib | |||
| 1.3.6.1.4.1.43.15 | NodesecurityViolation | A security violation trap indicates that a user has attempted to login and failed to enter the correct password Three times consecutively. | ||
| 1.3.6.1.4.1.43.16 | NodegaugesThresholdTrap | Generated when the Alarm value for this Alarm crosses the Threshold Level. | ||
| 1.3.6.1.4.1.43.17 | NodegaugesRecoveryTrap | Generated when the Alarm value for this Alarm crosses the Recovery Level. | ||
| 1.3.6.1.4.1.43.18 | NodeslFailed | When a system load is requested, a response is returned immediately and the load proceeds in the background. If an error is detected this trap is generated ind… | ||
| 1.3.6.1.4.1.43.19 | NodeestStateChange | When the end-station table moves from the noChange to modified state this trap is generated. The trap is sent once on this transition and not subsequently unti… | ||
| 1.3.6.1.4.1.43.20 | NodeestTableFull | When the end-station table becomes full this trap is generated. | ||
| 1.3.6.1.4.1.43.24 | NoderpMauJabberTrap | This trap is sent whenever a managed MAU enters the jabber state. The agent must throttle the generation of consecutive rpMauJabberTraps so that there is at le… | ||
| 1.3.6.1.4.1.43.27 | NodephyEntityInserted | This trap is sent when a new entity is detected in the chassis. The entity is identified both by its location in the chassis and it's type information. The dis… | ||
| 1.3.6.1.4.1.43.28 | NodephyEntityRemoved | This trap is sent when an entity is removed. The qualifier information on the variables identify the location of the entity that has been removed while the ent… | ||
| 1.3.6.1.4.1.43.29 | NodephyFacilityChanged | This trap is sent when the facility table is changed. This trap is only send when the change is made as the result of a local management request. The trap incl… | ||
| 1.3.6.1.4.1.43.30 | NodeserviceEntityAdded | This trap is sent when a card is added to a service. This trap is always sent, regardless of how the card addition occurred. There are two situations in which … | ||
| 1.3.6.1.4.1.43.31 | NodeserviceEntityRemoved | This trap is sent when an entity is removed from a service. This trap is always sent, regardless of how the card removal occurred. There are two situations in … | ||
| 1.3.6.1.4.1.43.32 | NodephysicalStateChange | A physical entity in the rack has changed state. This can be the result of a failure or recovery. The variables accompanying this trap identify the entity whic… | ||
| 1.3.6.1.4.1.43.33 | NodepsuCapacityExceeded | The combination of the power requirements of all the entities in the chassis has been calculated to exceed the power capacity of the power supplies present in … | ||
| 1.3.6.1.4.1.43.34 | NodetempStateChange | Mounted on the Management card is a temperature sensing device. This device provides three output levels : OK, WARM and DANGER. DANGER causes a trap to be gene… | ||
| 1.3.6.1.4.1.43.35 | NodestatusInputStateChange | Sent when the state of one of the management card status inputs changes from open to close or vice-versa and the value of statusTrapEnable is 'enable' | ||
| 1.3.6.1.4.1.43.36 | NodemrmStationLearnTrap | This trap indicates that this port has autolearnt an end station address. | ||
| 1.3.6.1.4.1.43.37 | NodemrmSecurityTrap | This trap indicates that this port has detected a security violation. | ||
| 1.3.6.1.4.1.43.38 | NoderepPartitionStateChange | This trap is sent when the partition state of a port changes. The trap is accompanied by the new partition state of the port. | ||
| 1.3.6.1.4.1.43.39 | NoderepLinkStateChange | This trap is sent when the link state of a port changes. The var-bind identifies which port has changed state and what the new state of that port is. | ||
| 1.3.6.1.4.1.43.40 | NoderepAdminStateChange | This trap is only sent when the administration state of a port is changed by a gauge. It is not sent if a user initiates a state change via SNMP, Telnet or the… | ||
| 1.3.6.1.4.1.43.41 | NoderepPortTopUsage | This trap is sent when the port bandwidth used exceeds the defined threshold. This threshold is by default 15%, although this may have been changed on a partic… | ||
| 1.3.6.1.4.1.43.42 | NoderepPortErrors | This trap is sent when the errors per packet exceeds the the defined threshold. | ||
| 1.3.6.1.4.1.43.43 | NoderesResilienceSwitch | This trap is generated when a change of state of one of the ports in a resilient pair does not result in a switch of active port. If such a switch were to occu… | ||
| 1.3.6.1.4.1.43.44 | NoderesStateChange | This trap is generated when a change of state of one of the ports in a resilient pair does not result in a switch of active port. If such a switch were to occu… | ||
| 1.3.6.1.5.1 | TablesecurityEnableTable | not-accessible | mandatory | A table of permissions for access to the managed device from each of its interfaces, at each security access level. The table is fixed at 5 rows, indexed by th… |
| 1.3.6.1.5.1.1 | RowsecurityEnableTableEntry | not-accessible | mandatory | This table allows individual interfaces to be enabled or disabled separately for each security level. |
| 1.3.6.1.5.1.1.1 | ColumnsecurityLevel | read-only | mandatory | Index to the security enable table. |
| 1.3.6.1.5.1.1.2 | ColumnsecurityCommunityEnable | read-write | mandatory | Community SNMP access permission |
| 1.3.6.1.5.1.1.3 | ColumnsecuritySecureEnable | read-write | mandatory | Secure SNMP access permission |
| 1.3.6.1.5.1.1.4 | ColumnsecurityTermEnable | read-write | mandatory | Local Terminal access permission |
| 1.3.6.1.5.1.1.5 | ColumnsecurityTelnetEnable | read-write | mandatory | Telnet access permission |
| 1.3.6.1.5.1.1.6 | ColumnsecurityFrontPanelEnable | read-write | mandatory | Front Panel access permission |
| 1.3.6.1.5.2 | TablesecurityUserTable | not-accessible | mandatory | A table used to define Users. Users can be created/modified or deleted, with the exception of the default Users which cannot be deleted. |
| 1.3.6.1.5.2.1 | RowsecurityUserTableEntry | not-accessible | mandatory | 1. Creating a new user is done by using the username as a qualifier and SETting any of the items in the row - defaults will be used for the remaining values. 2… |
| 1.3.6.1.5.2.1.1 | ColumnsecurityUserStatus | read-write | mandatory | User Status. `invalid' is used to indicate this user is no longer allowed to access this device, and the table entry may subsequently be re-used. Note that the… |
| 1.3.6.1.5.2.1.2 | ColumnsecurityUserName | read-only | mandatory | An ASCII string for the User Name. Empty strings are not allowed. The index column for the User Table. |
| 1.3.6.1.5.2.1.3 | ColumnsecurityUserLevel | read-write | mandatory | User Access Level defining the scope of management allowed for this user. Note that the access level of default Users cannot be changed. |
| 1.3.6.1.5.2.1.4 | ColumnsecurityUserPassword | write-only | mandatory | The password required for user confirmation, when access is made via the local serial port, the front panel, or via Telnet. |
| 1.3.6.1.5.2.1.5 | ColumnsecurityUserCommunity | read-write | mandatory | The community string identifying this user, when access is made via the original community-based SNMP (RFC1157). |
| 1.3.6.1.5.2.1.6 | ColumnsecurityUserLocParty | read-write | mandatory | The local party identity of this user, when access is made via secure SNMP. |
| 1.3.6.1.5.2.1.7 | ColumnsecurityUserMgrParty | read-write | mandatory | The manager party identity for this user, when access is made via secure SNMP. |
| 1.3.6.1.5.3 | TablesecurityAuditLog | not-accessible | mandatory | The audit log is a circular table recording all updates to the managed database on the device. The log must be read regularly by a management device, to mainta… |
| 1.3.6.1.5.3.1 | RowsecurityAuditLogEntry | not-accessible | mandatory | Each entry contains the time an update was made, by whom, the item referenced, the new value and the result of this request. |
| 1.3.6.1.5.3.1.1 | ColumnsecurityAuditIndex | read-only | mandatory | Audit Log Index. A monotonically increasing value to uniquely identify an entry in the audit log. This value wraps around (to 1) after reaching the maximum val… |
| 1.3.6.1.5.3.1.2 | ColumnsecurityAuditTime | read-only | mandatory | The time, in hundredths of a second since the last system restart, of the update request. |
| 1.3.6.1.5.3.1.3 | ColumnsecurityAuditUser | read-only | mandatory | The name of the user making the request. |
| 1.3.6.1.5.3.1.4 | ColumnsecurityAuditObject | read-only | mandatory | The object identifier of the item being updated. This includes any qualifier for the item. |
| 1.3.6.1.5.3.1.5 | ColumnsecurityAuditValue | read-only | mandatory | The new value for the item. |
| 1.3.6.1.5.3.1.6 | ColumnsecurityAuditResult | read-only | mandatory | The result of the update request may indicate that it was applied successfully, that it failed (for one of a number of reasons) or that it is still in progress. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING | ||
| PhysAddress | OCTET STRING |