LENOVO-XCC-MIB
913 objects
This MIB is to be used to provide monitoring information support for Lenovo XClarity Controller (XCC)
Imported Objects
| INET-ADDRESS-MIB | InetAddressIPv6 |
| LENOVO-SMI-MIB | lenovoServerMibs |
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises Gauge IpAddress |
| RFC1213-MIB | DisplayString |
| SNMPv2-TC | -- TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.19046.11.1 | IdentitylenovoXCCMIB | This MIB is to be used to provide monitoring information support for Lenovo XClarity Controller (XCC) | ||
| 1.3.6.1.4.1.19046.11.1.1 | Nodemonitors | |||
| 1.3.6.1.4.1.19046.11.1.1.1 | Nodetemperature | |||
| 1.3.6.1.4.1.19046.11.1.1.1.1 | ScalartempNumber | read-only | mandatory | The present number of rows in the temperature table. |
| 1.3.6.1.4.1.19046.11.1.1.1.2 | TabletempTable | not-accessible | mandatory | This table contains temperature measurement information. |
| 1.3.6.1.4.1.19046.11.1.1.1.2.1 | RowtempEntry | not-accessible | mandatory | Each row contains parameters related to a temperature measurement channel. |
| 1.3.6.1.4.1.19046.11.1.1.1.2.1.1 | ColumntempIndex | read-only | mandatory | This column is used to identify a particular temperature measurement channel. |
| 1.3.6.1.4.1.19046.11.1.1.1.2.1.2 | ColumntempDescr | read-only | mandatory | A description of the temperature measurement channel. |
| 1.3.6.1.4.1.19046.11.1.1.1.2.1.3 | ColumntempReading | read-only | mandatory | The measured temperature. |
| 1.3.6.1.4.1.19046.11.1.1.1.2.1.4 | ColumntempNominalReading | read-only | mandatory | The nominal temperature, if available. |
| 1.3.6.1.4.1.19046.11.1.1.1.2.1.5 | ColumntempNonRecovLimitHigh | read-only | mandatory | The non-recoverable limit for the measured temperature. If the measured value rises above this limit a trap is sent. |
| 1.3.6.1.4.1.19046.11.1.1.1.2.1.6 | ColumntempCritLimitHigh | read-only | mandatory | The critical limit for the measured temperature. If the measured value rises above this limit a trap is sent. |
| 1.3.6.1.4.1.19046.11.1.1.1.2.1.7 | ColumntempNonCritLimitHigh | read-only | mandatory | The non-critical limit for the measured temperature. If the measured value rises above this limit a trap is sent. |
| 1.3.6.1.4.1.19046.11.1.1.1.2.1.8 | ColumntempNonRecovLimitLow | read-only | mandatory | The non-recoverable limit for the measured temperature. If the measured value falls below this limit a trap is sent. |
| 1.3.6.1.4.1.19046.11.1.1.1.2.1.9 | ColumntempCritLimitLow | read-only | mandatory | The critical limit for the measured temperature. If the measured value falls below this limit a trap is sent. |
| 1.3.6.1.4.1.19046.11.1.1.1.2.1.10 | ColumntempNonCritLimitLow | read-only | mandatory | The non-critical limit for the measured temperature. If the measured value falls below this limit a trap is sent. |
| 1.3.6.1.4.1.19046.11.1.1.1.2.1.11 | ColumntempHealthStatus | read-only | mandatory | A description of the temperature component status. |
| 1.3.6.1.4.1.19046.11.1.1.2 | Nodevoltage | |||
| 1.3.6.1.4.1.19046.11.1.1.2.1 | ScalarvoltNumber | read-only | mandatory | The present number of rows in the voltage table. |
| 1.3.6.1.4.1.19046.11.1.1.2.2 | TablevoltTable | not-accessible | mandatory | This table contains voltage measurement information. |
| 1.3.6.1.4.1.19046.11.1.1.2.2.1 | RowvoltEntry | not-accessible | mandatory | Each row contains parameters related to a voltage measurement channel. |
| 1.3.6.1.4.1.19046.11.1.1.2.2.1.1 | ColumnvoltIndex | read-only | mandatory | This column is used to identify a particular voltage measurement channel. |
| 1.3.6.1.4.1.19046.11.1.1.2.2.1.2 | ColumnvoltDescr | read-only | mandatory | A description of the voltage measurement channel. |
| 1.3.6.1.4.1.19046.11.1.1.2.2.1.3 | ColumnvoltReading | read-only | mandatory | The measured voltage. |
| 1.3.6.1.4.1.19046.11.1.1.2.2.1.4 | ColumnvoltNominalReading | read-only | mandatory | The nominal voltage, if available. |
| 1.3.6.1.4.1.19046.11.1.1.2.2.1.5 | ColumnvoltNonRecovLimitHigh | read-only | mandatory | The high non-recoverable limit for the measured voltage. If the measured value falls above this limit a trap is sent. |
| 1.3.6.1.4.1.19046.11.1.1.2.2.1.6 | ColumnvoltCritLimitHigh | read-only | mandatory | The high critical limit for the measured voltage. If the measured value rises above this limit a trap is sent. |
| 1.3.6.1.4.1.19046.11.1.1.2.2.1.7 | ColumnvoltNonCritLimitHigh | read-only | mandatory | The high non-critical limit for the measured voltage. If the measured value rises above this limit a trap is sent. |
| 1.3.6.1.4.1.19046.11.1.1.2.2.1.8 | ColumnvoltNonRecovLimitLow | read-only | mandatory | The low non-recoverable limit for the measured voltage. If the measured value falls below this limit a trap is sent. |
| 1.3.6.1.4.1.19046.11.1.1.2.2.1.9 | ColumnvoltCritLimitLow | read-only | mandatory | The low critical limit for the measured voltage. If the measured value falls below this limit a trap is sent. |
| 1.3.6.1.4.1.19046.11.1.1.2.2.1.10 | ColumnvoltNonCritLimitLow | read-only | mandatory | The low non-critical limit for the measured voltage. If the measured value falls below this limit a trap is sent. |
| 1.3.6.1.4.1.19046.11.1.1.2.2.1.11 | ColumnvoltHealthStatus | read-only | mandatory | A description of the voltage component status. |
| 1.3.6.1.4.1.19046.11.1.1.3 | Nodefans | |||
| 1.3.6.1.4.1.19046.11.1.1.3.1 | ScalarfanNumber | read-only | mandatory | The present number of rows in the fan table. |
| 1.3.6.1.4.1.19046.11.1.1.3.2 | TablefanTable | not-accessible | mandatory | This table contains fan information. |
| 1.3.6.1.4.1.19046.11.1.1.3.2.1 | RowfanEntry | not-accessible | mandatory | Each row contains parameters related to a fan. |
| 1.3.6.1.4.1.19046.11.1.1.3.2.1.1 | ColumnfanIndex | read-only | mandatory | This column is used to identify a particular fan. |
| 1.3.6.1.4.1.19046.11.1.1.3.2.1.2 | ColumnfanDescr | read-only | mandatory | A description of the fan measurement channel. |
| 1.3.6.1.4.1.19046.11.1.1.3.2.1.3 | ColumnfanSpeed | read-only | mandatory | Fan speed expressed in percent(%) of maximum RPM. An octet string expressed as 'ddd% of maximum' where: d is a decimal digit or blank space for a leading zero.… |
| 1.3.6.1.4.1.19046.11.1.1.3.2.1.4 | ColumnfanNonRecovLimitHigh | read-only | mandatory | The high non-recoverable limit for the measured fan. If the measured value falls above this limit a trap is sent. |
| 1.3.6.1.4.1.19046.11.1.1.3.2.1.5 | ColumnfanCritLimitHigh | read-only | mandatory | The high critical limit for the measured fan. If the measured value rises above this limit a trap is sent. |
| 1.3.6.1.4.1.19046.11.1.1.3.2.1.6 | ColumnfanNonCritLimitHigh | read-only | mandatory | The high non-critical limit for the measured fan. If the measured value rises above this limit a trap is sent. |
| 1.3.6.1.4.1.19046.11.1.1.3.2.1.7 | ColumnfanNonRecovLimitLow | read-only | mandatory | The low non-recoverable limit for the measured fan. If the measured value falls below this limit a trap is sent. |
| 1.3.6.1.4.1.19046.11.1.1.3.2.1.8 | ColumnfanCritLimitLow | read-only | mandatory | The low critical limit for the measured fan. If the measured value falls below this limit a trap is sent. |
| 1.3.6.1.4.1.19046.11.1.1.3.2.1.9 | ColumnfanNonCritLimitLow | read-only | mandatory | The low non-critical limit for the measured fan. If the measured value falls below this limit a trap is sent. |
| 1.3.6.1.4.1.19046.11.1.1.3.2.1.10 | ColumnfanHealthStatus | read-only | mandatory | A description of the fan component status. |
| 1.3.6.1.4.1.19046.11.1.1.4 | NodesystemHealth | |||
| 1.3.6.1.4.1.19046.11.1.1.4.1 | ScalarsystemHealthStat | read-only | mandatory | Indicates status of system health for the system in which the XCC resides. Value of 'nonRecoverable' indicates a severe error has occurred and the system may n… |
| 1.3.6.1.4.1.19046.11.1.1.4.2 | TablesystemHealthSummaryTable | not-accessible | mandatory | Table of System Health summary. Contains more detailed information about the reasons for the overall system health status. |
| 1.3.6.1.4.1.19046.11.1.1.4.2.1 | RowsystemHealthSummaryEntry | not-accessible | mandatory | System Health Summary entry |
| 1.3.6.1.4.1.19046.11.1.1.4.2.1.1 | ColumnsystemHealthSummaryIndex | read-only | mandatory | System health summary index. |
| 1.3.6.1.4.1.19046.11.1.1.4.2.1.2 | ColumnsystemHealthSummarySeverity | read-only | mandatory | System health summary severity. |
| 1.3.6.1.4.1.19046.11.1.1.4.2.1.3 | ColumnsystemHealthSummaryDescription | read-only | mandatory | System health summary description. |
| 1.3.6.1.4.1.19046.11.1.1.5 | NodevpdInformation | |||
| 1.3.6.1.4.1.19046.11.1.1.5.1 | TablexccVpdTable | not-accessible | mandatory | Table of XCC VPD. |
| 1.3.6.1.4.1.19046.11.1.1.5.1.1 | RowxccVpdEntry | not-accessible | mandatory | iMBC VPD entry. |
| 1.3.6.1.4.1.19046.11.1.1.5.1.1.1 | ColumnxccVpdIndex | read-only | mandatory | XCC VPD index. |
| 1.3.6.1.4.1.19046.11.1.1.5.1.1.2 | ColumnxccVpdType | read-only | mandatory | XCC VPD Type. Indicates either Bios or Diag or spFimware VPD |
| 1.3.6.1.4.1.19046.11.1.1.5.1.1.3 | ColumnxccVpdVersionString | read-only | mandatory | XCC VPD Version Number of the software(Bios/Diag/spFirmware). For XCC the string contains both the Build ID and the Version Number, for example, like '1AOO3A v… |
| 1.3.6.1.4.1.19046.11.1.1.5.1.1.4 | ColumnxccVpdReleaseDate | read-only | mandatory | XCC VPD Release Date of when the software(Bios/Diag/spFirmware) was released. |
| 1.3.6.1.4.1.19046.11.1.1.5.2 | NodemachineVpd | |||
| 1.3.6.1.4.1.19046.11.1.1.5.2.1 | NodemachineLevelVpd | |||
| 1.3.6.1.4.1.19046.11.1.1.5.2.1.1 | ScalarmachineLevelVpdMachineType | read-only | mandatory | Machine type VPD information. |
| 1.3.6.1.4.1.19046.11.1.1.5.2.1.2 | ScalarmachineLevelVpdMachineModel | read-only | mandatory | Machine model VPD information. |
| 1.3.6.1.4.1.19046.11.1.1.5.2.1.3 | ScalarmachineLevelSerialNumber | read-only | mandatory | Machine serial number VPD information. |
| 1.3.6.1.4.1.19046.11.1.1.5.2.1.4 | ScalarmachineLevelUUID | read-only | mandatory | Machine UUID(Universal Unique ID information). |
| 1.3.6.1.4.1.19046.11.1.1.5.2.1.5 | ScalarmachineLevelProductName | read-only | mandatory | Machine Product Name (e.g. System x3650 M2). |
| 1.3.6.1.4.1.19046.11.1.1.5.17 | TablesystemComponentLevelVpdTable | not-accessible | mandatory | Table of the system component hardware VPD information. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.17.1 | RowsystemComponentLevelVpdEntry | not-accessible | mandatory | System component hardware VPD entry. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.17.1.1 | ColumncomponentLevelVpdIndex | read-only | mandatory | System component level VPD index. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.17.1.2 | ColumncomponentLevelVpdFruNumber | read-only | mandatory | System component level VPD FRU number. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.17.1.3 | ColumncomponentLevelVpdFruName | read-only | mandatory | System component level VPD FRU name. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.17.1.4 | ColumncomponentLevelVpdSerialNumber | read-only | mandatory | System component level VPD serial number. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.17.1.5 | ColumncomponentLevelVpdManufacturingId | read-only | mandatory | System component level VPD manufacturing ID. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.18 | TablesystemComponentLevelVpdTrackingTable | not-accessible | mandatory | Table of system component hardware VPD tracking activity log. The activity log types depend on ipmifru information in the server but exclude DIMM infromation. … |
| 1.3.6.1.4.1.19046.11.1.1.5.18.1 | RowsystemComponentLevelVpdTrackingEntry | not-accessible | mandatory | System component hardware VPD tracking activity log entry. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.18.1.1 | ColumncomponentLevelVpdTrackingIndex | read-only | mandatory | System component level VPD tracking activity log index. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.18.1.2 | ColumncomponentLevelVpdTrackingFruNumber | read-only | mandatory | System component level VPD tracking activity log FRU number. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.18.1.3 | ColumncomponentLevelVpdTrackingFruName | read-only | mandatory | System component level VPD tracking activity log FRU name. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.18.1.4 | ColumncomponentLevelVpdTrackingSerialNumber | read-only | mandatory | System component level VPD tracking activity log serial number. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.18.1.5 | ColumncomponentLevelVpdTrackingManufacturingId | read-only | mandatory | System component level VPD tracking activity log manufacturing ID. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.18.1.6 | ColumncomponentLevelVpdTrackingAction | read-only | mandatory | System component level VPD tracking activity log action(added/removed). View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.18.1.7 | ColumncomponentLevelVpdTrackingTimestamp | read-only | mandatory | System component level VPD tracking activity log timestanp. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.19 | TablehostMACAddressTable | not-accessible | mandatory | Table of MAC addresses of the host NICs. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.19046.11.1.1.5.19.1 | RowhostMACAddressEntry | not-accessible | mandatory | Host MAC address entry. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.19046.11.1.1.5.19.1.1 | ColumnhostMACAddressIndex | read-only | mandatory | Host MAC address index. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.19.1.2 | ColumnhostMACAddressDescription | read-only | mandatory | Description of the MAC Address entry. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.19.1.3 | ColumnhostMACAddress | read-only | mandatory | Host MAC address must be a hexadecimal value between 000000000000 - FFFFFFFFFFFF. This value must be in the form XX:XX:XX:XX:XX:XX View as a table and not as i… |
| 1.3.6.1.4.1.19046.11.1.1.5.20 | TablesystemCPUVpdTable | not-accessible | mandatory | Table of the system CPU VPD information. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.20.1 | RowsystemCPUVpdEntry | not-accessible | mandatory | System CPU VPD entry. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.20.1.1 | ColumncpuVpdIndex | read-only | mandatory | System CPU level VPD index. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.20.1.2 | ColumncpuVpdDescription | read-only | mandatory | System CPU Description. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.20.1.3 | ColumncpuVpdSpeed | read-only | mandatory | System cpu speed in MHz. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.20.1.4 | ColumncpuVpdIdentifier | read-only | mandatory | System CPU Identifier. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.20.1.5 | ColumncpuVpdType | read-only | mandatory | System cpu Type. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.20.1.6 | ColumncpuVpdFamily | read-only | mandatory | System cpu Family. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.20.1.7 | ColumncpuVpdCores | read-only | mandatory | System cpu number of cores. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.20.1.8 | ColumncpuVpdThreads | read-only | mandatory | System cpu number of threads. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.20.1.9 | ColumncpuVpdVoltage | read-only | mandatory | System cpu voltage in millivolts (1125 = 1.125 volts). View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.20.1.10 | ColumncpuVpdDataWidth | read-only | mandatory | System cpu data width in bits. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.20.1.11 | ColumncpuVpdHealthStatus | read-only | mandatory | System cpu health status. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.20.1.12 | ColumncpuVpdCpuModel | read-only | mandatory | System cpu model. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.21 | TablesystemMemoryVpdTable | not-accessible | mandatory | Table of the system Memory VPD information. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.21.1 | RowsystemMemoryVpdEntry | not-accessible | mandatory | System Memory VPD entry. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.21.1.1 | ColumnmemoryVpdIndex | read-only | mandatory | System Memory level VPD index. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.21.1.2 | ColumnmemoryVpdDescription | read-only | mandatory | System memory Description (e.g. DIMM 1). View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.21.1.3 | ColumnmemoryVpdPartNumber | read-only | mandatory | System Memory Part Number. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.21.1.4 | ColumnmemoryVpdFRUSerialNumber | read-only | mandatory | System memory Serial Number. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.21.1.5 | ColumnmemoryVpdManufactureDate | read-only | mandatory | System memory Manufacture Date in week/year format (e.g. 3609). View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.21.1.6 | ColumnmemoryVpdType | read-only | mandatory | System memory Type (e.g. DDR III SDRAM). View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.21.1.7 | ColumnmemoryVpdSize | read-only | mandatory | System memory size in GigaBytes. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.21.1.8 | ColumnmemoryHealthStatus | read-only | mandatory | A description of the memory component status. |
| 1.3.6.1.4.1.19046.11.1.1.5.21.1.9 | ColumnmemoryConfigSpeed | read-only | mandatory | System configured memory clock speed in MHz. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.21.1.10 | ColumnmemoryRatedSpeed | read-only | mandatory | System rated memory clock speed in MB/s. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.21.1.11 | ColumnmemoryLenovoPartNumber | read-only | mandatory | System Memory Lenovo related Part Number. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.21.1.12 | ColumnmemoryVpdAEPFlag | read-only | mandatory | Judge System DIMM belong to AEP DIMM. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.22 | TablesystemAepDIMMVpdTable | not-accessible | mandatory | Table of the system AEP DIMM VPD information. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.22.1 | RowsystemAepDIMMVpdEntry | not-accessible | mandatory | System AEP DIMM VPD entry. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.22.1.1 | ColumnaepDIMMVpdIndex | read-only | mandatory | System AEP DIMM VPD index. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.22.1.2 | ColumnaepDIMMVpdMemory | read-only | mandatory | System AEP DIMM Description (e.g. DIMM 1). View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.22.1.3 | ColumnaepDIMMVpdBankLocator | read-only | mandatory | The Locator which manage AEP DIMM (e.g CPU 1) . View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.22.1.4 | ColumnaepDIMMVpdMaxSpeed | read-only | mandatory | System AEP DIMM MAX Speed. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.22.1.5 | ColumnaepDIMMVpdClockSpeed | read-only | mandatory | System AEP DIMM Clock Speed. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.22.1.6 | ColumnaepDIMMVpdManufacturer | read-only | mandatory | System AEP DIMM Manufacturer. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.22.1.7 | ColumnaepDIMMVpdSerialNumber | read-only | mandatory | System AEP DIMM Serial Number. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.22.1.8 | ColumnaepDIMMVpdPartNumber | read-only | mandatory | System AEP DIMM Part Number. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.22.1.9 | ColumnaepDIMMVpdRawCapacity | read-only | mandatory | System AEP DIMM Raw Capacity. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.22.1.10 | ColumnaepDIMMVpdMemoryCapacity | read-only | mandatory | System AEP DIMM Memory Capacity. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.22.1.11 | ColumnaepDIMMVpdAppDirectCapacity | read-only | mandatory | System AEP DIMM APP Direct Capacity. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.22.1.12 | ColumnaepDIMMVpdUnconfiguredCapacity | read-only | mandatory | System AEP DIMM Unconfigureed Capacity. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.22.1.13 | ColumnaepDIMMVpdInaccessibleCapacity | read-only | mandatory | System AEP DIMM Inaccessible Capacity. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.22.1.14 | ColumnaepDIMMVpdReservedCapacity | read-only | mandatory | System AEP DIMM Reserved Capacity. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.22.1.15 | ColumnaepDIMMVpdClassification | read-only | mandatory | System AEP DIMM Classification. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.22.1.16 | ColumnaepDIMMVpdFirmwareVersion | read-only | mandatory | System AEP DIMM Firmware Version. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.5.22.1.17 | ColumnaepDIMMVpdSoftwareID | read-only | mandatory | System AEP DIMM Software ID. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.6 | Nodeusers | |||
| 1.3.6.1.4.1.19046.11.1.1.6.1 | NodexccUsers | |||
| 1.3.6.1.4.1.19046.11.1.1.6.1.1 | TablecurrentlyLoggedInTable | not-accessible | mandatory | Table of XCC users currently logged in. |
| 1.3.6.1.4.1.19046.11.1.1.6.1.1.1 | RowcurrentlyLoggedInEntry | not-accessible | mandatory | XCC users currently logged in entries. |
| 1.3.6.1.4.1.19046.11.1.1.6.1.1.1.1 | ColumncurrentlyLoggedInEntryIndex | read-only | mandatory | Index for XCC users currently logged in. |
| 1.3.6.1.4.1.19046.11.1.1.6.1.1.1.2 | ColumncurrentlyLoggedInEntryUserId | read-only | mandatory | Name for XCC users currently logged in. |
| 1.3.6.1.4.1.19046.11.1.1.6.1.1.1.3 | ColumncurrentlyLoggedInEntryAccMethod | read-only | mandatory | Access method for XCC users currently logged in. |
| 1.3.6.1.4.1.19046.11.1.1.8 | Nodeleds | |||
| 1.3.6.1.4.1.19046.11.1.1.8.1 | ScalaridentityLED | read-only | mandatory | Indicates whether the front panel identity LED is on,off, or blinking and allows user to change it. |
| 1.3.6.1.4.1.19046.11.1.1.8.2 | TableallLEDsTable | not-accessible | mandatory | Table of LEDs detailed information. |
| 1.3.6.1.4.1.19046.11.1.1.8.2.1 | RowallLEDsEntry | not-accessible | mandatory | LEDs Details entry |
| 1.3.6.1.4.1.19046.11.1.1.8.2.1.1 | ColumnledIndex | read-only | mandatory | The LED index number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.19046.11.1.1.8.2.1.2 | ColumnledIdentifier | read-only | mandatory | The unique identifier for this LED For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.19046.11.1.1.8.2.1.4 | ColumnledLabel | read-only | mandatory | Text label for a LED. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.19046.11.1.1.8.2.1.5 | ColumnledState | read-only | mandatory | Text description which denotes color or on/off/blink state for a LED. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.19046.11.1.1.8.2.1.6 | ColumnledColor | read-only | mandatory | Color of this LED. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.19046.11.1.1.8.3 | ScalarinformationLED | read-only | mandatory | Indicates whether the front panel Information LED is on,off, or blinking and allows user to change it. The only value the user is allowed to enter is 0 for off… |
| 1.3.6.1.4.1.19046.11.1.1.10 | NodefuelGauge | |||
| 1.3.6.1.4.1.19046.11.1.1.10.1 | NodefuelGaugeInformation | |||
| 1.3.6.1.4.1.19046.11.1.1.10.1.1 | ScalarfuelGaugePowerCappingPolicySetting | read-only | mandatory | Power Capping Policy. Rack system only. No Power Limit - The maximum power limit will be determined by the active Power Redundancy policy. Static Power Limit -… |
| 1.3.6.1.4.1.19046.11.1.1.10.1.2 | ScalarfuelGaugeStaticPowerPcapSoftMin | read-only | mandatory | This field displays power capping soft minimum value. Rack system only. |
| 1.3.6.1.4.1.19046.11.1.1.10.1.3 | ScalarfuelGaugeStaticPowerPcapMin | read-only | mandatory | This field displays power capping minimum value. Rack system only. |
| 1.3.6.1.4.1.19046.11.1.1.10.1.4 | ScalarfuelGaugeStaticPowerPcapCurrentSetting | read-only | mandatory | This field is used to display or set the current power capping value. Rack system only. |
| 1.3.6.1.4.1.19046.11.1.1.10.1.5 | ScalarfuelGaugeStaticPowerPcapMax | read-only | mandatory | This field displays power capping maximum value. Rack system only. |
| 1.3.6.1.4.1.19046.11.1.1.10.1.6 | ScalarfuelGaugeStaticPowerPcapMode | read-only | mandatory | This field is used to display or set the all Power Cap settings to output or input. Rack system only. |
| 1.3.6.1.4.1.19046.11.1.1.10.1.7 | ScalarfuelGaugeSystemMaxPower | read-only | mandatory | This field displays the system maximum power available value. Rack system only. |
| 1.3.6.1.4.1.19046.11.1.1.10.1.8 | ScalarfuelGaugePowerRemaining | read-only | mandatory | This field displays power remaining value. Rack system only. |
| 1.3.6.1.4.1.19046.11.1.1.10.1.9 | ScalarfuelGaugeTotalPowerAvailable | read-only | mandatory | This field displays the calculated total remaining power available value. Rack system only. |
| 1.3.6.1.4.1.19046.11.1.1.10.1.10 | ScalarfuelGaugeTotalPowerInUse | read-only | mandatory | This field displays total power in use value. |
| 1.3.6.1.4.1.19046.11.1.1.10.1.11 | ScalarfuelGaugePowerConsumptionCpu | read-only | mandatory | This field displays the power consumption of the processors. |
| 1.3.6.1.4.1.19046.11.1.1.10.1.12 | ScalarfuelGaugePowerConsumptionMemory | read-only | mandatory | This field displays the power consumption of the memory. |
| 1.3.6.1.4.1.19046.11.1.1.10.1.13 | ScalarfuelGaugePowerConsumptionOther | read-only | mandatory | This field displays the power consumption of other entities than processors and memory. |
| 1.3.6.1.4.1.19046.11.1.1.10.2 | NodepowerPolicyInformation | |||
| 1.3.6.1.4.1.19046.11.1.1.10.2.1 | TablepowerPolicyTable | not-accessible | mandatory | Table of Power Policy information for all power domains. Reading this table information about the available power policies that can be configured and which is … |
| 1.3.6.1.4.1.19046.11.1.1.10.2.1.1 | RowpowerPolicyEntry | not-accessible | mandatory | Power Policy Entry |
| 1.3.6.1.4.1.19046.11.1.1.10.2.1.1.1 | ColumnpowerPolicyIndex | read-only | mandatory | The unique idenitifier of a row in the powerPolicyTable. |
| 1.3.6.1.4.1.19046.11.1.1.10.2.1.1.2 | ColumnpowerPolicyName | read-only | mandatory | The short name of the power policy. The following are the possible names and their detailed description: Power Module Redundant In redundant mode, the server i… |
| 1.3.6.1.4.1.19046.11.1.1.10.2.1.1.3 | ColumnpowerPolicyPwrSupplyFailureLimit | read-only | mandatory | The maximum number of power supplies that can fail in a chassis while still providing redundancy. |
| 1.3.6.1.4.1.19046.11.1.1.10.2.1.1.4 | ColumnpowerPolicyMaxPowerLimit | read-only | mandatory | The maximum power available (in watts), based on the number of power modules and the Power Management Policy setting. |
| 1.3.6.1.4.1.19046.11.1.1.10.2.1.1.5 | ColumnpowerPolicyEstimatedUtilization | read-only | mandatory | The estimated utilization (as a percentage) based on current power usage. |
| 1.3.6.1.4.1.19046.11.1.1.10.2.1.1.6 | ColumnpowerPolicyActivate | read-only | mandatory | This object provides the status of this power policy. If the value is enabled(1), it means this is the active power policy for the associated domain. When set … |
| 1.3.6.1.4.1.19046.11.1.1.10.2.2 | NodepowerRestorePolicyControl | |||
| 1.3.6.1.4.1.19046.11.1.1.10.2.2.1 | ScalarpowerRestorePolicy | read-only | mandatory | Power Restore Policy determines the mode of operation if a power loss occurs. This setting can also be configured via BIOS F1 setup. Rack system only. alwaysof… |
| 1.3.6.1.4.1.19046.11.1.1.10.2.2.2 | ScalarpowerRestoreDelay | read-only | mandatory | Power Restore Delay is executed when power restore policy is set to alwayson or restore(if the previous state was power-on). Rack system only. disabled: Power … |
| 1.3.6.1.4.1.19046.11.1.1.10.3 | NodepowerPowerTrending | |||
| 1.3.6.1.4.1.19046.11.1.1.10.3.1 | TablepowerTrendingSampleTable | not-accessible | mandatory | Table of Power Domain 1 Power Trending Information. |
| 1.3.6.1.4.1.19046.11.1.1.10.3.1.1 | RowpowerTrendingSampleEntry | not-accessible | mandatory | Power Domain 1 Power Trending Sample entry. |
| 1.3.6.1.4.1.19046.11.1.1.10.3.1.1.1 | ColumnpowerTrendingSampleIndex | read-only | mandatory | Power Trending Sample Table Index. |
| 1.3.6.1.4.1.19046.11.1.1.10.3.1.1.2 | ColumnpowerTrendingSampleTimeStamp | read-only | mandatory | Power Trending Sample Table Timestamp. |
| 1.3.6.1.4.1.19046.11.1.1.10.3.1.1.3 | ColumnpowerTrendingSampleInputAve | read-only | mandatory | Power Trending Table Input Average Power in the last 24 hours. |
| 1.3.6.1.4.1.19046.11.1.1.10.3.1.1.4 | ColumnpowerTrendingSampleInputMin | read-only | mandatory | Power Trending Table Input Minimum Power in the last 24 hours. |
| 1.3.6.1.4.1.19046.11.1.1.10.3.1.1.5 | ColumnpowerTrendingSampleInputMax | read-only | mandatory | Power Trending Table Input Maximum Power in the last 24 hours. |
| 1.3.6.1.4.1.19046.11.1.1.10.3.1.1.6 | ColumnpowerTrendingSampleOutputAve | read-only | mandatory | Power Trending Table Output Average Power in the last 24 hours. |
| 1.3.6.1.4.1.19046.11.1.1.10.3.1.1.7 | ColumnpowerTrendingSampleOutputMin | read-only | mandatory | Power Trending Table Output Minimum Power in the last 24 hours. |
| 1.3.6.1.4.1.19046.11.1.1.10.3.1.1.8 | ColumnpowerTrendingSampleOutputMax | read-only | mandatory | Power Trending Table Output Maximum Power in the last 24 hours. |
| 1.3.6.1.4.1.19046.11.1.1.11 | NodepowerModule | |||
| 1.3.6.1.4.1.19046.11.1.1.11.1 | ScalarpowerNumber | read-only | mandatory | The present number of rows in the power module table. Rack system only. |
| 1.3.6.1.4.1.19046.11.1.1.11.2 | TablepowerTable | not-accessible | mandatory | This table contains power inventory information. Rack system only. |
| 1.3.6.1.4.1.19046.11.1.1.11.2.1 | RowpowerEntry | not-accessible | mandatory | Each row contains parameters related to a power module inventory channel. |
| 1.3.6.1.4.1.19046.11.1.1.11.2.1.1 | ColumnpowerIndex | read-only | mandatory | This column is used to identify a particular power module inventory channel. |
| 1.3.6.1.4.1.19046.11.1.1.11.2.1.2 | ColumnpowerFruName | read-only | mandatory | power module FRU name. |
| 1.3.6.1.4.1.19046.11.1.1.11.2.1.3 | ColumnpowerPartNumber | read-only | mandatory | power module Part Number. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.11.2.1.4 | ColumnpowerFRUNumber | read-only | mandatory | power module FRU Number. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.11.2.1.5 | ColumnpowerFRUSerialNumber | read-only | mandatory | power module Serial Number. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.1.11.2.1.6 | ColumnpowerHealthStatus | read-only | mandatory | A description of the power module status. |
| 1.3.6.1.4.1.19046.11.1.1.12 | Nodedisks | |||
| 1.3.6.1.4.1.19046.11.1.1.12.1 | ScalardiskNumber | read-only | mandatory | The present number of rows in the disk module table. |
| 1.3.6.1.4.1.19046.11.1.1.12.2 | TablediskTable | not-accessible | mandatory | This table contains disk inventory information. |
| 1.3.6.1.4.1.19046.11.1.1.12.2.1 | RowdiskEntry | not-accessible | mandatory | Each row contains parameters related to a disk module inventory channel. |
| 1.3.6.1.4.1.19046.11.1.1.12.2.1.1 | ColumndiskIndex | read-only | mandatory | This column is used to identify a particular disk module inventory channel. |
| 1.3.6.1.4.1.19046.11.1.1.12.2.1.2 | ColumndiskFruName | read-only | mandatory | disk module FRU name. |
| 1.3.6.1.4.1.19046.11.1.1.12.2.1.3 | ColumndiskHealthStatus | read-only | mandatory | A description of the disk module status. |
| 1.3.6.1.4.1.19046.11.1.1.13 | NodelocalStorage | |||
| 1.3.6.1.4.1.19046.11.1.1.13.1 | Noderaid | |||
| 1.3.6.1.4.1.19046.11.1.1.13.1.1 | ScalarraidOOBCapable | read-only | mandatory | If raidOOBCapable is disabled, all the RAID information is not available. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2 | TableraidControllerTable | not-accessible | mandatory | Table of Local Storage RAID Controller information. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1 | RowraidControllerEntry | not-accessible | mandatory | RAID Controller Entry. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.1 | ColumnraidCtrlIndex | read-only | mandatory | This column is used to identify a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.2 | ColumnraidCtrlName | read-only | mandatory | This column is used to offer a name of one RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.3 | ColumnraidCtrlVPDProdName | read-only | mandatory | The Product Name of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.4 | ColumnraidCtrlFWPkgVersion | read-only | mandatory | The Firmware Package Version of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.5 | ColumnraidCtrlBatBCK | read-only | mandatory | Whether Battery Backup of a particular RAID controller is installed. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.6 | ColumnraidCtrlVPDManufacture | read-only | mandatory | The Manufacture of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.7 | ColumnraidCtrlVPDUUID | read-only | mandatory | The Device ID (UUID) of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.8 | ColumnraidCtrlVPDMachineType | read-only | mandatory | The Model Type/Model of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.9 | ColumnraidCtrlVPDModel | read-only | mandatory | The Model Type/Model of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.10 | ColumnraidCtrlVPDSerialNo | read-only | mandatory | The Serial Number of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.11 | ColumnraidCtrlVPDFRUNo | read-only | mandatory | The FRU Number of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.12 | ColumnraidCtrlVPDPartNo | read-only | mandatory | The Part Number of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.13 | ColumnraidCtrlCacheMdlStatus | read-only | mandatory | The Cache Model Status of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.14 | ColumnraidCtrlCacheMdlMemSize | read-only | mandatory | The Cache Model Memory Size of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.15 | ColumnraidCtrlCacheMdlSerialNo | read-only | mandatory | The Cache Model Serial Number of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.16 | ColumnraidCtrlPCISlotNo | read-only | mandatory | The PCI Slot Number of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.17 | ColumnraidCtrlPCIBusNo | read-only | mandatory | The PCI Bus Number of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.18 | ColumnraidCtrlPCIDevNo | read-only | mandatory | The PCI Device Number of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.19 | ColumnraidCtrlPCIFuncNo | read-only | mandatory | The PCI Function Number of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.20 | ColumnraidCtrlPCIDevID | read-only | mandatory | The PCI Device ID of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.21 | ColumnraidCtrlPCISubDevID | read-only | mandatory | The PCI Subsystem Device ID of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.22 | ColumnraidCtrlBatBCKProdName | read-only | mandatory | The Product Name of Battery Backup of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.23 | ColumnraidCtrlBatBCKManufacture | read-only | mandatory | The Manufacture of Battery Backup of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.24 | ColumnraidCtrlBatBCKStatus | read-only | mandatory | The Status of Battery Backup of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.25 | ColumnraidCtrlBatBCKType | read-only | mandatory | The Battery Type of Battery Backup of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.26 | ColumnraidCtrlBatBCKChem | read-only | mandatory | The Chemistry of Battery Backup of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.27 | ColumnraidCtrlBatBCKSerialNo | read-only | mandatory | The Serial Number of Battery Backup of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.28 | ColumnraidCtrlBatBCKChgCap | read-only | mandatory | The Charge Capacity of Battery Backup of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.29 | ColumnraidCtrlBatBCKFirmware | read-only | mandatory | The Firmware Info of Battery Backup of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.30 | ColumnraidCtrlBatBCKDgnVoltage | read-only | mandatory | The Designed Voltage of Battery Backup of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.31 | ColumnraidCtrlBatBCKVoltage | read-only | mandatory | The Voltage of Battery Backup of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.32 | ColumnraidCtrlBatCurrent | read-only | mandatory | The Current of Battery Backup of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.33 | ColumnraidCtrlBatBCKDgnChgCap | read-only | mandatory | The Design Charge Capacity of Battery Backup of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.34 | ColumnraidCtrlBatBCKCrtTemp | read-only | mandatory | The Current degree Celsius temperature of Battery Backup of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.35 | ColumnraidCtrlFWNames | read-only | mandatory | All the Firmware Names of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.36 | ColumnraidCtrlPortDetails | read-only | mandatory | All the Port Details of a particular RAID controller, including Port Address and Port Controller Type. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.37 | ColumnraidCtrlStoragepools | read-only | mandatory | The storage pools list of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.2.1.38 | ColumnraidCtrlDrives | read-only | mandatory | The Physical drives list of a particular RAID controller. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.3 | TableraidDriveTable | not-accessible | mandatory | Table of Logic Storage RAID Drive information. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.3.1 | RowraidDriveEntry | not-accessible | mandatory | RAID Drive Entry. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.3.1.1 | ColumnraidDriveIndex | read-only | mandatory | This column is used to identify a particular RAID drive. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.3.1.2 | ColumnraidDriveName | read-only | mandatory | A particular drive name. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.3.1.3 | ColumnraidDriveVPDProdName | read-only | mandatory | The Product Name of a particular RAID drive. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.3.1.4 | ColumnraidDriveState | read-only | mandatory | The State of a particular RAID drive. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.3.1.5 | ColumnraidDriveSlotNo | read-only | mandatory | The Slot No. of a particular RAID drive. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.3.1.6 | ColumnraidDriveDeviceID | read-only | mandatory | The Device ID of a particular RAID drive. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.3.1.7 | ColumnraidDriveDiskType | read-only | mandatory | The Disk Type of a particular RAID drive. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.3.1.8 | ColumnraidDriveMediaType | read-only | mandatory | The Media Type of a particular RAID drive. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.3.1.9 | ColumnraidDriveSpeed | read-only | mandatory | The Speed of a particular RAID drive. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.3.1.10 | ColumnraidDriveCurTemp | read-only | mandatory | The Current degree Celsius temperature of a particular RAID drive. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.3.1.11 | ColumnraidDriveHealthStataus | read-only | mandatory | The Health Status of a particular RAID drive. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.3.1.12 | ColumnraidDriveCapacity | read-only | mandatory | The Capacity of a particular RAID drive. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.3.1.13 | ColumnraidDriveVPDManufacture | read-only | mandatory | The Manufacture of a particular RAID drive. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.3.1.14 | ColumnraidDriveEnclosureID | read-only | mandatory | The Enclosure ID of a particular RAID drive. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.3.1.15 | ColumnraidDriveVPDMachineType | read-only | mandatory | The Machine type of a particular RAID drive. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.3.1.16 | ColumnraidDriveVPDModel | read-only | mandatory | The Model of a particular RAID drive. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.3.1.17 | ColumnraidDriveVPDSerialNo | read-only | mandatory | The Serial No. of a particular RAID drive. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.3.1.18 | ColumnraidDriveVPDFRUNo | read-only | mandatory | The FRU No. of a particular RAID drive. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.3.1.19 | ColumnraidDriveVPDPartNo | read-only | mandatory | The Part No. of a particular RAID drive. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.3.1.20 | ColumnraidDriveFWNames | read-only | mandatory | All the Firmware Names of a particular RAID drive. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.3.1.21 | ColumnraidDriveRotationRate | read-only | mandatory | The Rotation Rate of a particular RAID drive. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.3.1.22 | ColumnraidDriveMediaErrCnt | read-only | mandatory | The Media Error Count of a particular RAID drive. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.3.1.23 | ColumnraidDriveOtherErrCnt | read-only | mandatory | The Other Error Count of a particular RAID drive. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.3.1.24 | ColumnraidDrivePredFailCnt | read-only | mandatory | The Predication Fail Count of a particular RAID drive. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.3.1.25 | ColumnraidDriveRemainingLife | read-only | mandatory | The Remaining life of a particular RAID drive. It is available only for SSD Drive. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.3.1.26 | ColumnraidDriveFdeCapable | read-only | mandatory | Indicates Full Disk Encryption Capable of a particular RAID drive. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.3.1.27 | ColumnraidDriveSecured | read-only | mandatory | Indicates Secured status of a particular RAID drive. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.4 | TableraidControllerFirmwareTable | not-accessible | mandatory | Table of Logic Storage RAID Controller Firmware information. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.4.1 | RowraidControllerFirmwareEntry | not-accessible | mandatory | RAID Firmware Entry. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.4.1.1 | ColumnraidControllerFirmwareIndex | read-only | mandatory | This column is used to identify a particular RAID Controller firmware. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.4.1.2 | ColumnraidControllerFirmwareName | read-only | mandatory | The Name of a particular RAID Controller firmware. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.4.1.3 | ColumnraidControllerFirmwareCtrlName | read-only | mandatory | The controller name of the firmwares. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.4.1.4 | ColumnraidControllerFirmwareDescription | read-only | mandatory | The Description of a particular RAID Controller firmware. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.4.1.5 | ColumnraidControllerFirmwareManufacture | read-only | mandatory | The Manufacture of a particular RAID Controller firmware. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.4.1.6 | ColumnraidControllerFirmwareVersion | read-only | mandatory | The Version of a particular RAID Controller firmware. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.4.1.7 | ColumnraidControllerFirmwareReleaseDate | read-only | mandatory | The Release Date of a particular RAID Controller firmware. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.5 | TableraidDriveFirmwareTable | not-accessible | mandatory | Table of Logic Storage RAID Drive Firmware information. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.5.1 | RowraidDriveFirmwareEntry | not-accessible | mandatory | RAID Drive Firmware Entry. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.5.1.1 | ColumnraidDriveFirmwareIndex | read-only | mandatory | This column is used to identify a particular RAID Drive firmware. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.5.1.2 | ColumnraidDriveFirmwareName | read-only | mandatory | The Name of a particular RAID Drive firmware. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.5.1.3 | ColumnraidDriveFirmwareDriveName | read-only | mandatory | The drive name of the firmwares. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.5.1.4 | ColumnraidDriveFirmwareDescription | read-only | mandatory | The Description of a particular RAID Drive firmware. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.5.1.5 | ColumnraidDriveFirmwareManufacture | read-only | mandatory | The Manufacture of a particular RAID Drive firmware. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.5.1.6 | ColumnraidDriveFirmwareVersion | read-only | mandatory | The Version of a particular RAID Drive firmware. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.5.1.7 | ColumnraidDriveFirmwareReleaseDate | read-only | mandatory | The Release Date of a particular RAID Drive firmware. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.6 | TableraidStoragepoolTable | not-accessible | mandatory | Table of Logic Storage RAID Storagepool information. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.6.1 | RowraidStoragepoolEntry | not-accessible | mandatory | RAID Storagepool Entry. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.6.1.1 | ColumnraidStoragepoolIndex | read-only | mandatory | This column is used to identify a particular RAID storagepool. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.6.1.2 | ColumnraidStoragepoolName | read-only | mandatory | The name of a particular RAID storagepool. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.6.1.3 | ColumnraidStoragepoolControllerName | read-only | mandatory | The controller name of the storagepool. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.6.1.4 | ColumnraidStoragepoolState | read-only | mandatory | The RAID State of a particular RAID storagepool. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.6.1.5 | ColumnraidStoragepoolCapacity | read-only | mandatory | The Capacity of a particular RAID storagepool, including total capacity and free capacity. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.6.1.6 | ColumnraidStoragepoolVols | read-only | mandatory | The volumes list of a particular RAID storagepool. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.6.1.7 | ColumnraidStoragepoolDrives | read-only | mandatory | The physical drives list of a particular RAID storagepool. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.7 | TableraidVolumeTable | not-accessible | mandatory | Table of Logic Storage RAID Volume information. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.7.1 | RowraidVolumeEntry | not-accessible | mandatory | RAID Volume Entry. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.7.1.1 | ColumnraidVolumeIndex | read-only | mandatory | This column is used to identify a particular RAID volume. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.7.1.2 | ColumnraidVolumeName | read-only | mandatory | The Name of a particular RAID volume. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.7.1.3 | ColumnraidVolumeControllerName | read-only | mandatory | The controller name of the volume. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.7.1.4 | ColumnraidVolumeStatus | read-only | mandatory | The Status of a particular RAID volume. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.7.1.5 | ColumnraidVolumeCapacity | read-only | mandatory | The Capacity of a particular RAID volume. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.7.1.6 | ColumnraidVolumeStripSize | read-only | mandatory | The strip size of the RAID volume. |
| 1.3.6.1.4.1.19046.11.1.1.13.1.7.1.7 | ColumnraidVolumeBootable | read-only | mandatory | Whether the RAID volume is bootable. |
| 1.3.6.1.4.1.19046.11.1.1.14 | Nodeadapters | |||
| 1.3.6.1.4.1.19046.11.1.1.14.1 | ScalaradapterOOBCapable | read-only | mandatory | If adapterOOBCapable is disabled, all the adapter information is not available. |
| 1.3.6.1.4.1.19046.11.1.1.14.2 | TableadapterGenericTable | not-accessible | mandatory | Table of all adapters generic information |
| 1.3.6.1.4.1.19046.11.1.1.14.2.1 | RowadapterGenericEntry | not-accessible | mandatory | Adapters generic information entry. |
| 1.3.6.1.4.1.19046.11.1.1.14.2.1.1 | ColumnadapterGenericIndex | read-only | mandatory | This column is used to identify a particular PCI adapter. |
| 1.3.6.1.4.1.19046.11.1.1.14.2.1.2 | ColumnadapterGenericVPDProdName | read-only | mandatory | The Product Name of a particular PCI adapter. And if the Product Name contains PFA, PFA is in HEX. |
| 1.3.6.1.4.1.19046.11.1.1.14.2.1.3 | ColumnadapterGenericSlotNo | read-only | mandatory | This Slot No. of a particular PCI adapter |
| 1.3.6.1.4.1.19046.11.1.1.14.2.1.4 | ColumnadapterGenericLocation | read-only | mandatory | The Location of a particular PCI adapter. |
| 1.3.6.1.4.1.19046.11.1.1.14.2.1.5 | ColumnadapterGenericCardInterface | read-only | mandatory | The Card Interface of a particular PCI adapter. |
| 1.3.6.1.4.1.19046.11.1.1.14.3 | TableadapterNetworkFunctionTable | not-accessible | mandatory | Table of Network Function information. |
| 1.3.6.1.4.1.19046.11.1.1.14.3.1 | RowadapterNetworkFunctionEntry | not-accessible | mandatory | Network function information entry. |
| 1.3.6.1.4.1.19046.11.1.1.14.3.1.1 | ColumnadapterNetworkFunctionIndex | read-only | mandatory | This column is used to identify a particular network function. |
| 1.3.6.1.4.1.19046.11.1.1.14.3.1.2 | ColumnadapterNetworkFunctionNetworkVPDProdName | read-only | mandatory | The Product Name and PFA of a particular network function and PFA is in HEX. |
| 1.3.6.1.4.1.19046.11.1.1.14.3.1.3 | ColumnadapterNetworkFunctionAdapterVPDProdName | read-only | mandatory | The Product Name of a particular adapter providing this function. And if the Product Name contains PFA, PFA is in HEX. |
| 1.3.6.1.4.1.19046.11.1.1.14.3.1.4 | ColumnadapterNetworkFunctionNetworkVPDManufacturer | read-only | mandatory | The Manufacturer of a particular network function. |
| 1.3.6.1.4.1.19046.11.1.1.14.3.1.5 | ColumnadapterNetworkFunctionNetworkVPDUUID | read-only | mandatory | The UUID of a particular network function. |
| 1.3.6.1.4.1.19046.11.1.1.14.3.1.6 | ColumnadapterNetworkFunctionNetworkVPDModel | read-only | mandatory | The Model of a particular network function. |
| 1.3.6.1.4.1.19046.11.1.1.14.3.1.7 | ColumnadapterNetworkFunctionNetworkVPDSerialNo | read-only | mandatory | The Serial No. of a particular network function. |
| 1.3.6.1.4.1.19046.11.1.1.14.3.1.8 | ColumnadapterNetworkFunctionNetworkVPDFRUNo | read-only | mandatory | The FRU No. of a particular network function. |
| 1.3.6.1.4.1.19046.11.1.1.14.3.1.9 | ColumnadapterNetworkFunctionNetworkVPDPartNo | read-only | mandatory | The Part No. of a particular network function. |
| 1.3.6.1.4.1.19046.11.1.1.14.3.1.10 | ColumnadapterNetworkFunctionFoDUID | read-only | mandatory | The FoD UID of a particular network function. |
| 1.3.6.1.4.1.19046.11.1.1.14.3.1.11 | ColumnadapterNetworkFunctionSupportHotPlug | read-only | mandatory | Indicates whether the network function supports hot plug. |
| 1.3.6.1.4.1.19046.11.1.1.14.3.1.12 | ColumnadapterNetworkFunctionPhysicalPortNumber | read-only | mandatory | The Physical Port Number of a particular network function. |
| 1.3.6.1.4.1.19046.11.1.1.14.3.1.13 | ColumnadapterNetworkFunctionMaxPortNumber | read-only | mandatory | The Max Port Number of a particular network function. |
| 1.3.6.1.4.1.19046.11.1.1.14.3.1.14 | ColumnadapterNetworkFunctionPortNumber | read-only | mandatory | The Port Number of a particular network function. |
| 1.3.6.1.4.1.19046.11.1.1.14.3.1.15 | ColumnadapterNetworkFunctionMaxDataWidth | read-only | mandatory | The Maximum Data Width in Gbps of a particular network funtion. |
| 1.3.6.1.4.1.19046.11.1.1.14.3.1.16 | ColumnadapterNetworkFunctionPackageType | read-only | mandatory | The Package Type of a particular network function. |
| 1.3.6.1.4.1.19046.11.1.1.14.3.1.17 | ColumnadapterNetworkFunctionPCIBusNo | read-only | mandatory | The PCI Bus No. of a particular network function. |
| 1.3.6.1.4.1.19046.11.1.1.14.3.1.18 | ColumnadapterNetworkFunctionPCIDevNo | read-only | mandatory | The PCI Device No. of a particular network function. |
| 1.3.6.1.4.1.19046.11.1.1.14.3.1.19 | ColumnadapterNetworkFunctionPCIFuncNo | read-only | mandatory | The PCI Function No. of a particular network function. |
| 1.3.6.1.4.1.19046.11.1.1.14.3.1.20 | ColumnadapterNetworkFunctionPCIVendorId | read-only | mandatory | The PCI Vendor ID of a particular network function. |
| 1.3.6.1.4.1.19046.11.1.1.14.3.1.21 | ColumnadapterNetworkFunctionPCIDevId | read-only | mandatory | The PCI Device ID of a particular network function. |
| 1.3.6.1.4.1.19046.11.1.1.14.3.1.22 | ColumnadapterNetworkFunctionPCIDevType | read-only | mandatory | The PCI Device Type of a particular network function. |
| 1.3.6.1.4.1.19046.11.1.1.14.3.1.23 | ColumnadapterNetworkFunctionPCIRevId | read-only | mandatory | The PCI Revision ID of a particular network function. |
| 1.3.6.1.4.1.19046.11.1.1.14.3.1.24 | ColumnadapterNetworkFunctionPCISubVendorId | read-only | mandatory | The PCI Subsystem Vendor ID of a particular network function. |
| 1.3.6.1.4.1.19046.11.1.1.14.3.1.25 | ColumnadapterNetworkFunctionPCISubDevId | read-only | mandatory | The PCI Subsystem Device ID of a particular network function. |
| 1.3.6.1.4.1.19046.11.1.1.14.3.1.26 | ColumnadapterNetworkFunctionPCISlotDesignation | read-only | mandatory | The PCI Slot Designation of a particular network function. |
| 1.3.6.1.4.1.19046.11.1.1.14.4 | TableadapterNetworkPortTable | not-accessible | mandatory | Table of Ports of Network Function information. |
| 1.3.6.1.4.1.19046.11.1.1.14.4.1 | RowadapterNetworkPortEntry | not-accessible | mandatory | Ports of Network Function information entry. |
| 1.3.6.1.4.1.19046.11.1.1.14.4.1.1 | ColumnadapterNetworkPortIndex | read-only | mandatory | This column is used to identify a particular network port. |
| 1.3.6.1.4.1.19046.11.1.1.14.4.1.2 | ColumnadapterNetworkPortNetworkVPDProdName | read-only | mandatory | The Product Name and PFA of the network function for this port and PFA is in HEX. |
| 1.3.6.1.4.1.19046.11.1.1.14.4.1.3 | ColumnadapterNetworkPortPhyPortNo | read-only | mandatory | The Physical Port No. in the network function for this port. |
| 1.3.6.1.4.1.19046.11.1.1.14.4.1.4 | ColumnadapterNetworkPortPhyPortConnector | read-only | mandatory | The Physical Port Connector Layout in the network function for this port. |
| 1.3.6.1.4.1.19046.11.1.1.14.4.1.5 | ColumnadapterNetworkPortPhyPortBurnedinAddress | read-only | mandatory | The Physical Permanent (burned-In) Address of a particular network port. |
| 1.3.6.1.4.1.19046.11.1.1.14.4.1.6 | ColumnadapterNetworkPortNo | read-only | mandatory | The Port No. of this network port in the network function. |
| 1.3.6.1.4.1.19046.11.1.1.14.4.1.7 | ColumnadapterNetworkPortMaxDataSize | read-only | mandatory | The Port Max Data Size of this network port in the network function. |
| 1.3.6.1.4.1.19046.11.1.1.14.4.1.8 | ColumnadapterNetworkPortPermanentAddress | read-only | mandatory | The Permanent Address of a particular network port. |
| 1.3.6.1.4.1.19046.11.1.1.14.4.1.9 | ColumnadapterNetworkPortNetworkAddress | read-only | mandatory | The Network Address of a particular network port. |
| 1.3.6.1.4.1.19046.11.1.1.14.4.1.10 | ColumnadapterNetworkPortLinkTechnology | read-only | mandatory | The Link Technology of a particular network port. |
| 1.3.6.1.4.1.19046.11.1.1.14.4.1.11 | ColumnadapterNetworkPortvNICMode | read-only | mandatory | If the logical port vNIC mode is Virtual Fabric mode, Switch Independent mode, or Unified Fabric Protocol mode, this column returns 1(enabled), otherwise, the … |
| 1.3.6.1.4.1.19046.11.1.1.14.4.1.12 | ColumnadapterNetworkPortMaxSpeed | read-only | mandatory | The Maximum Bandwidth in Gbps of a particular network port. |
| 1.3.6.1.4.1.19046.11.1.1.14.4.1.13 | ColumnadapterNetworkPortProtocolType | read-only | mandatory | The Protocol Type of a particular network port. |
| 1.3.6.1.4.1.19046.11.1.1.14.4.1.14 | ColumnadapterNetworkPortCurrentProtocol | read-only | mandatory | The Current Work Protocol of a particular network port. |
| 1.3.6.1.4.1.19046.11.1.1.14.4.1.15 | ColumnadapterNetworkPortFCoEPermanentAddress | read-only | mandatory | The FCoE Permanent Address of a particular network port. |
| 1.3.6.1.4.1.19046.11.1.1.14.4.1.16 | ColumnadapterNetworkPortFCoENetworkAddress | read-only | mandatory | The FCoE Network Address of a particular network port. |
| 1.3.6.1.4.1.19046.11.1.1.14.4.1.17 | ColumnadapterNetworkPortConnectionType | read-only | mandatory | The Connection Type of a particular network port if its current work protocol is FC or FCoE. |
| 1.3.6.1.4.1.19046.11.1.1.14.4.1.18 | ColumnadapterNetworkPortRole | read-only | mandatory | The Port Role of a particular network port if its current work protocol is FC or FCoE. |
| 1.3.6.1.4.1.19046.11.1.1.14.4.1.19 | ColumnadapterNetworkPortTargetRelativePortNo | read-only | mandatory | The Target Relative Port No. of a particular network port if its current work protocol is FC or FCoE. |
| 1.3.6.1.4.1.19046.11.1.1.14.4.1.20 | ColumnadapterNetworkPortPhyPortLinkStatus | read-only | mandatory | The Physical Port Link Status in the network function for this port. |
| 1.3.6.1.4.1.19046.11.1.1.14.4.1.21 | ColumnadapterNetworkPortPhyPortLinkSpeed | read-only | mandatory | The Physical Port Link Speed in the network function for this port. |
| 1.3.6.1.4.1.19046.11.1.1.14.5 | TableadapterGPUFunctionTable | not-accessible | mandatory | Table of GPU Function information. |
| 1.3.6.1.4.1.19046.11.1.1.14.5.1 | RowadapterGPUFunctionEntry | not-accessible | mandatory | GPU function information entry. |
| 1.3.6.1.4.1.19046.11.1.1.14.5.1.1 | ColumnadapterGPUFunctionIndex | read-only | mandatory | This column is used to identify a particular GPU function. |
| 1.3.6.1.4.1.19046.11.1.1.14.5.1.2 | ColumnadapterGPUFunctionGpuVPDProdName | read-only | mandatory | The Product Name and PFA of a particular GPU function and PFA is in HEX. |
| 1.3.6.1.4.1.19046.11.1.1.14.5.1.3 | ColumnadapterGPUFunctionAdapterVPDProdName | read-only | mandatory | The Product Name of a particular adapter providing this function. And if the Product Name contains PFA, PFA is in HEX. |
| 1.3.6.1.4.1.19046.11.1.1.14.5.1.4 | ColumnadapterGPUFunctionGpuVPDManufacturer | read-only | mandatory | The Manufacturer of a particular GPU function. |
| 1.3.6.1.4.1.19046.11.1.1.14.5.1.5 | ColumnadapterGPUFunctionGpuVPDUUID | read-only | mandatory | The UUID of a particular GPU function. |
| 1.3.6.1.4.1.19046.11.1.1.14.5.1.6 | ColumnadapterGPUFunctionGpuVPDModel | read-only | mandatory | The Model of a particular GPU function. |
| 1.3.6.1.4.1.19046.11.1.1.14.5.1.7 | ColumnadapterGPUFunctionGpuVPDSerialNo | read-only | mandatory | The Serial No. of a particular GPU function. |
| 1.3.6.1.4.1.19046.11.1.1.14.5.1.8 | ColumnadapterGPUFunctionGpuVPDFRUNo | read-only | mandatory | The FRU No. of a particular GPU function. |
| 1.3.6.1.4.1.19046.11.1.1.14.5.1.9 | ColumnadapterGPUFunctionGpuVPDPartNo | read-only | mandatory | The Part No. of a particular GPU function. |
| 1.3.6.1.4.1.19046.11.1.1.14.5.1.10 | ColumnadapterGPUFunctionFoDUID | read-only | mandatory | The FoD UID of a particular GPU function. |
| 1.3.6.1.4.1.19046.11.1.1.14.5.1.11 | ColumnadapterGPUFunctionSupportHotPlug | read-only | mandatory | Indicates whether the GPU function supports hot plug. |
| 1.3.6.1.4.1.19046.11.1.1.14.5.1.12 | ColumnadapterGPUFunctionVideoMemorySize | read-only | mandatory | The Video Memory Size of a particular GPU function. |
| 1.3.6.1.4.1.19046.11.1.1.14.5.1.13 | ColumnadapterGPUFunctionVideoMemoryType | read-only | mandatory | The Video Memory Type of a particular GPU function. |
| 1.3.6.1.4.1.19046.11.1.1.14.5.1.14 | ColumnadapterGPUFunctionChipNumber | read-only | mandatory | The Chip Number of a particular GPU function. |
| 1.3.6.1.4.1.19046.11.1.1.14.5.1.15 | ColumnadapterGPUFunctionMaxDataWidth | read-only | mandatory | The Maximum Data Width in Gbps of a particular GPU funtion. |
| 1.3.6.1.4.1.19046.11.1.1.14.5.1.16 | ColumnadapterGPUFunctionPackageType | read-only | mandatory | The Package Type of a particular GPU function. |
| 1.3.6.1.4.1.19046.11.1.1.14.5.1.17 | ColumnadapterGPUFunctionPCIBusNo | read-only | mandatory | The PCI Bus No. of a particular GPU function. |
| 1.3.6.1.4.1.19046.11.1.1.14.5.1.18 | ColumnadapterGPUFunctionPCIDevNo | read-only | mandatory | The PCI Device No. of a particular GPU function. |
| 1.3.6.1.4.1.19046.11.1.1.14.5.1.19 | ColumnadapterGPUFunctionPCIFuncNo | read-only | mandatory | The PCI Function No. of a particular GPU function. |
| 1.3.6.1.4.1.19046.11.1.1.14.5.1.20 | ColumnadapterGPUFunctionPCIVendorId | read-only | mandatory | The PCI Vendor ID of a particular GPU function. |
| 1.3.6.1.4.1.19046.11.1.1.14.5.1.21 | ColumnadapterGPUFunctionPCIDevId | read-only | mandatory | The PCI Device ID of a particular GPU function. |
| 1.3.6.1.4.1.19046.11.1.1.14.5.1.22 | ColumnadapterGPUFunctionPCIDevType | read-only | mandatory | The PCI Device Type of a particular GPU function. |
| 1.3.6.1.4.1.19046.11.1.1.14.5.1.23 | ColumnadapterGPUFunctionPCIRevId | read-only | mandatory | The PCI Revision ID of a particular GPU function. |
| 1.3.6.1.4.1.19046.11.1.1.14.5.1.24 | ColumnadapterGPUFunctionPCISubVendorId | read-only | mandatory | The PCI Subsystem Vendor ID of a particular GPU function. |
| 1.3.6.1.4.1.19046.11.1.1.14.5.1.25 | ColumnadapterGPUFunctionPCISubDevId | read-only | mandatory | The PCI Subsystem Device ID of a particular GPU function. |
| 1.3.6.1.4.1.19046.11.1.1.14.5.1.26 | ColumnadapterGPUFunctionPCISlotDesignation | read-only | mandatory | The PCI Slot Designation of a particular GPU function. |
| 1.3.6.1.4.1.19046.11.1.1.14.6 | TableadapterGPUChipTable | not-accessible | mandatory | Table of Chips of GPU Function information. |
| 1.3.6.1.4.1.19046.11.1.1.14.6.1 | RowadapterGPUChipEntry | not-accessible | mandatory | GPU function chip information entry. |
| 1.3.6.1.4.1.19046.11.1.1.14.6.1.1 | ColumnadapterGPUChipIndex | read-only | mandatory | This column is used to identify a particular GPU chip |
| 1.3.6.1.4.1.19046.11.1.1.14.6.1.2 | ColumnadapterGPUChipGpuVPDProdName | read-only | mandatory | The Product Name and PFA of the GPU function for this chip and PFA is in HEX. |
| 1.3.6.1.4.1.19046.11.1.1.14.6.1.3 | ColumnadapterGPUChipNo | read-only | mandatory | The Index of the GPU chip in the GPU adapter. |
| 1.3.6.1.4.1.19046.11.1.1.14.6.1.4 | ColumnadapterGPUChipName | read-only | mandatory | The Name of a particular GPU chip. |
| 1.3.6.1.4.1.19046.11.1.1.14.6.1.5 | ColumnadapterGPUChipFamily | read-only | mandatory | The Family Name of a particular GPU chip. |
| 1.3.6.1.4.1.19046.11.1.1.14.6.1.6 | ColumnadapterGPUChipManufacturer | read-only | mandatory | The Manufacturer of a particular GPU chip. |
| 1.3.6.1.4.1.19046.11.1.1.14.6.1.7 | ColumnadapterGPUChipCoresEnabled | read-only | mandatory | Indicates whether enable cores of a particular GPU chip. |
| 1.3.6.1.4.1.19046.11.1.1.14.6.1.8 | ColumnadapterGPUChipMaxClockSpeed | read-only | mandatory | The Maximum Clock Speed in MHz of a particular GPU chip. |
| 1.3.6.1.4.1.19046.11.1.1.14.6.1.9 | ColumnadapterGPUChipExtBusClockSpeed | read-only | mandatory | The External Bus Clock Speed in MHz of a particular GPU chip. |
| 1.3.6.1.4.1.19046.11.1.1.14.6.1.10 | ColumnadapterGPUChipAddressWidth | read-only | mandatory | The Address Width of a particular GPU chip. |
| 1.3.6.1.4.1.19046.11.1.1.14.6.1.11 | ColumnadapterGPUChipDataWidth | read-only | mandatory | The Data Width of a particular GPU chip. |
| 1.3.6.1.4.1.19046.11.1.1.14.6.1.12 | ColumnadapterGPUChipFormFactor | read-only | mandatory | The Form Factor of a particular GPU chip. |
| 1.3.6.1.4.1.19046.11.1.1.14.6.1.13 | ColumnadapterGPUChipModel | read-only | mandatory | The Model of a particular GPU chip. |
| 1.3.6.1.4.1.19046.11.1.1.14.6.1.14 | ColumnadapterGPUChipSerialNo | read-only | mandatory | The Serial No. of a particular GPU chip. |
| 1.3.6.1.4.1.19046.11.1.1.14.6.1.15 | ColumnadapterGPUChipFRUNo | read-only | mandatory | The FRU No. of a particular GPU chip. |
| 1.3.6.1.4.1.19046.11.1.1.14.6.1.16 | ColumnadapterGPUChipPartNo | read-only | mandatory | The Part No. of a particular GPU chip. |
| 1.3.6.1.4.1.19046.11.1.1.14.6.1.17 | ColumnadapterGPUChipUniqueID | read-only | mandatory | The Unique ID of a particular GPU chip. |
| 1.3.6.1.4.1.19046.11.1.1.14.7 | TableadapterRAIDFunctionTable | not-accessible | mandatory | Table of RAID Function information. |
| 1.3.6.1.4.1.19046.11.1.1.14.7.1 | RowadapterRAIDFunctionEntry | not-accessible | mandatory | RAID function information entry. |
| 1.3.6.1.4.1.19046.11.1.1.14.7.1.1 | ColumnadapterRAIDFunctionIndex | read-only | mandatory | This column is used to identify a particular RAID function. |
| 1.3.6.1.4.1.19046.11.1.1.14.7.1.2 | ColumnadapterRAIDFunctionRaidVPDProdName | read-only | mandatory | The Product Name and PFA of a particular RAID function and PFA is in HEX. |
| 1.3.6.1.4.1.19046.11.1.1.14.7.1.3 | ColumnadapterRAIDFunctionAdapterVPDProdName | read-only | mandatory | The Product Name of a particular adapter providing this function. And if the Product Name contains PFA, PFA is in HEX. |
| 1.3.6.1.4.1.19046.11.1.1.14.7.1.4 | ColumnadapterRAIDFunctionRaidVPDManufacturer | read-only | mandatory | The Manufacturer of a particular RAID function. |
| 1.3.6.1.4.1.19046.11.1.1.14.7.1.5 | ColumnadapterRAIDFunctionRaidVPDUUID | read-only | mandatory | The UUID of a particular RAID function. |
| 1.3.6.1.4.1.19046.11.1.1.14.7.1.6 | ColumnadapterRAIDFunctionRaidVPDModel | read-only | mandatory | The Model of a particular RAID function. |
| 1.3.6.1.4.1.19046.11.1.1.14.7.1.7 | ColumnadapterRAIDFunctionRaidVPDSerialNo | read-only | mandatory | The Serial No. of a particular RAID function. |
| 1.3.6.1.4.1.19046.11.1.1.14.7.1.8 | ColumnadapterRAIDFunctionRaidVPDFRUNo | read-only | mandatory | The FRU No. of a particular RAID function. |
| 1.3.6.1.4.1.19046.11.1.1.14.7.1.9 | ColumnadapterRAIDFunctionRaidVPDPartNo | read-only | mandatory | The Part No. of a particular RAID function. |
| 1.3.6.1.4.1.19046.11.1.1.14.7.1.10 | ColumnadapterRAIDFunctionFoDUID | read-only | mandatory | The FoD UID of a particular RAID function. |
| 1.3.6.1.4.1.19046.11.1.1.14.7.1.11 | ColumnadapterRAIDFunctionSupportHotPlug | read-only | mandatory | Indicates whether the RAID function supports hot plug. |
| 1.3.6.1.4.1.19046.11.1.1.14.7.1.12 | ColumnadapterRAIDFunctionMaxDataWidth | read-only | mandatory | The Maximum Data Width in Gbps of a particular RAID funtion. |
| 1.3.6.1.4.1.19046.11.1.1.14.7.1.13 | ColumnadapterRAIDFunctionPackageType | read-only | mandatory | The Package Type of a particular RAID function. |
| 1.3.6.1.4.1.19046.11.1.1.14.7.1.14 | ColumnadapterRAIDFunctionPCIBusNo | read-only | mandatory | The PCI Bus No. of a particular RAID function. |
| 1.3.6.1.4.1.19046.11.1.1.14.7.1.15 | ColumnadapterRAIDFunctionPCIDevNo | read-only | mandatory | The PCI Device No. of a particular RAID function. |
| 1.3.6.1.4.1.19046.11.1.1.14.7.1.16 | ColumnadapterRAIDFunctionPCIFuncNo | read-only | mandatory | The PCI Function No. of a particular RAID function. |
| 1.3.6.1.4.1.19046.11.1.1.14.7.1.17 | ColumnadapterRAIDFunctionPCIVendorId | read-only | mandatory | The PCI Vendor ID of a particular RAID function. |
| 1.3.6.1.4.1.19046.11.1.1.14.7.1.18 | ColumnadapterRAIDFunctionPCIDevId | read-only | mandatory | The PCI Device ID of a particular RAID function. |
| 1.3.6.1.4.1.19046.11.1.1.14.7.1.19 | ColumnadapterRAIDFunctionPCIDevType | read-only | mandatory | The PCI Device Type of a particular RAID function. |
| 1.3.6.1.4.1.19046.11.1.1.14.7.1.20 | ColumnadapterRAIDFunctionPCIRevId | read-only | mandatory | The PCI Revision ID of a particular RAID function. |
| 1.3.6.1.4.1.19046.11.1.1.14.7.1.21 | ColumnadapterRAIDFunctionPCISubVendorId | read-only | mandatory | The PCI Subsystem Vendor ID of a particular RAID function. |
| 1.3.6.1.4.1.19046.11.1.1.14.7.1.22 | ColumnadapterRAIDFunctionPCISubDevId | read-only | mandatory | The PCI Subsystem Device ID of a particular RAID function. |
| 1.3.6.1.4.1.19046.11.1.1.14.7.1.23 | ColumnadapterRAIDFunctionPCISlotDesignation | read-only | mandatory | The PCI Slot Designation of a particular RAID function. |
| 1.3.6.1.4.1.19046.11.1.1.14.8 | TableadapterFirmwareTable | not-accessible | mandatory | Table of PCI Function Firmware information. |
| 1.3.6.1.4.1.19046.11.1.1.14.8.1 | RowadapterFirmwareEntry | not-accessible | mandatory | Adapter Firmware Entry. |
| 1.3.6.1.4.1.19046.11.1.1.14.8.1.1 | ColumnadapterFwIndex | read-only | mandatory | This column is used to identify a particular function firmware. |
| 1.3.6.1.4.1.19046.11.1.1.14.8.1.2 | ColumnadapterFwFunctionVPDProdName | read-only | mandatory | The Product Name and PFA of a particular function for this firmware and PFA is in HEX. |
| 1.3.6.1.4.1.19046.11.1.1.14.8.1.3 | ColumnadapterFwName | read-only | mandatory | The name of a particular PCI function firmware. |
| 1.3.6.1.4.1.19046.11.1.1.14.8.1.4 | ColumnadapterFwClassification | read-only | mandatory | The classification of a particular PCI function firmware. |
| 1.3.6.1.4.1.19046.11.1.1.14.8.1.5 | ColumnadapterFwDescription | read-only | mandatory | The description of a particular PCI function firmware. |
| 1.3.6.1.4.1.19046.11.1.1.14.8.1.6 | ColumnadapterFwManufacture | read-only | mandatory | The manufacturer of a particular PCI function firmware. |
| 1.3.6.1.4.1.19046.11.1.1.14.8.1.7 | ColumnadapterFwVersion | read-only | mandatory | The version of a particular PCI function firmware. |
| 1.3.6.1.4.1.19046.11.1.1.14.8.1.8 | ColumnadapterFwReleaseDate | read-only | mandatory | The release date of a particular PCI function firmware. |
| 1.3.6.1.4.1.19046.11.1.1.14.8.1.9 | ColumnadapterFwSoftwareID | read-only | mandatory | The Software ID of a particular PCI function firmware. |
| 1.3.6.1.4.1.19046.11.1.2 | NodeerrorLogs | |||
| 1.3.6.1.4.1.19046.11.1.2.1 | NodeeventLog | |||
| 1.3.6.1.4.1.19046.11.1.2.1.1 | TableeventLogTable | not-accessible | mandatory | Table of event logs. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.2.1.1.1 | RoweventLogEntry | not-accessible | mandatory | Event log entries. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.2.1.1.1.1 | ColumneventLogIndex | read-only | mandatory | Event log index number. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.2.1.1.1.2 | ColumneventLogString | read-only | mandatory | Contains a string of information to detail the event. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.2.1.1.1.3 | ColumneventLogSeverity | read-only | mandatory | Contains a information to detail the severity of the event. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.2.1.1.1.4 | ColumneventLogDate | read-only | mandatory | The Date of the Event occured. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.2.1.1.1.5 | ColumneventLogTime | read-only | mandatory | The Time of the Event occured. View as a table and not as individual entries for consistent results. |
| 1.3.6.1.4.1.19046.11.1.3 | NodeconfigureSP | |||
| 1.3.6.1.4.1.19046.11.1.3.1 | NoderemoteAccessConfig | |||
| 1.3.6.1.4.1.19046.11.1.3.1.1 | NodegeneralRemoteCfg | |||
| 1.3.6.1.4.1.19046.11.1.3.1.1.1 | ScalarremoteAlertRetryDelay | read-only | mandatory | Number in seconds to delay between retries if sending a remote alert is unsuccessful. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.2 | ScalarremoteAlertRetryCount | read-only | mandatory | Number of additional times a remote alert will be retried if not succesfully sent. A value of zero indicates no retries will be attempted. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.3 | ScalarremoteAlertEntryDelay | read-only | mandatory | Number in seconds to delay between entries if sending a remote alert is unsuccessful. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.4 | ScalarsnmpCriticalAlerts | read-only | mandatory | If Enabled,criticalAlerts will be sent to SNMP, else critical alerts will not be sent. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.5 | ScalarsnmpWarningAlerts | read-only | mandatory | If Enabled,warningAlerts will be sent to SNMP , else warning alerts will not be sent. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.6 | ScalarsnmpSystemAlerts | read-only | mandatory | If Enabled,systemAlerts will be sent to SNMP , else system alerts will not be sent. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.7 | ScalarremoteAccessTamperDelay | read-only | mandatory | Number in minutes to prohibit a remote login attempt after more than maximum login attempts have failed. The minimum value is 0 and the maximum value is 2880 m… |
| 1.3.6.1.4.1.19046.11.1.3.1.1.8 | ScalaruserAuthenticationMethod | read-only | mandatory | Use this field to specify how users attempting to login should be authenticated. There are two methods: Local authentication. Userid and password are verified … |
| 1.3.6.1.4.1.19046.11.1.3.1.1.9 | ScalarwebInactivityTimeout | read-only | mandatory | The amount of time, in minutes, that a user session established with the management server can be inactive before the user is logged out. The minimum value is … |
| 1.3.6.1.4.1.19046.11.1.3.1.1.10 | NodesnmpAlertFilters | |||
| 1.3.6.1.4.1.19046.11.1.3.1.1.10.2 | ScalarsafSpTrapTempC | read-only | mandatory | Critical Alert: Temperature threshold exceeded. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.10.3 | ScalarsafSpTrapVoltC | read-only | mandatory | Critical Alert: Voltage threshold exceeded. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.10.4 | ScalarsafSpTrapPowerC | read-only | mandatory | Critical Alert: Power failure. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.10.5 | ScalarsafSpTrapHdC | read-only | mandatory | Critical Alert: Hard disk drive failure. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.10.6 | ScalarsafSpTrapFanC | read-only | mandatory | Critical Alert: Single Fan failure. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.10.7 | ScalarsafSpTrapIhcC | read-only | mandatory | Critical Alert: Incompatible hardware configuration. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.10.8 | ScalarsafSpTrapCPUC | read-only | mandatory | Critical Alert: CPU Error. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.10.9 | ScalarsafSpTrapMemoryC | read-only | mandatory | Critical Alert: Memory Error. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.10.10 | ScalarsafSpTrapRdpsC | read-only | mandatory | Critical Alert: Redundant Power Supply failure. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.10.11 | ScalarsafSpTrapHardwareC | read-only | mandatory | Critical Alert: Other Failure - refer to Message ID for specific condition. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.10.12 | ScalarsafSpTrapRdpsN | read-only | mandatory | Non-Critical Alert: Redundant Power Supply failure. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.10.13 | ScalarsafSpTrapTempN | read-only | mandatory | Non-Critical Alert: Temperature threshold exceeded. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.10.14 | ScalarsafSpTrapVoltN | read-only | mandatory | Non-Critical Alert: Voltage threshold exceeded. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.10.15 | ScalarsafSpTrapPowerN | read-only | mandatory | Non-Critical Alert: Power. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.10.16 | ScalarsafSpTrapFanN | read-only | mandatory | Non-Critical Alert: Fan Error. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.10.17 | ScalarsafSpTrapCPUN | read-only | mandatory | Non-Critical Alert: Memory Error. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.10.18 | ScalarsafSpTrapMemoryN | read-only | mandatory | Non-Critical Alert: Memory Error. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.10.19 | ScalarsafSpTrapHardwareN | read-only | mandatory | Non-Critical Alert: Warning - refer to Message ID for specific condition. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.10.20 | ScalarsafSpTrapRLogin | read-only | mandatory | Sev-Off Alert: Event Remote Login. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.10.21 | ScalarsafSpTrapOsToS | read-only | mandatory | System Alert: OS Timeout value exceeded. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.10.22 | ScalarsafSpTrapAppS | read-only | mandatory | System Alert: Application Alert. Refer to Message ID for specific condition. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.10.23 | ScalarsafSpTrapPowerS | read-only | mandatory | System Alert: Power on or off. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.10.24 | ScalarsafSpTrapBootS | read-only | mandatory | System Alert: System Boot Failure. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.10.25 | ScalarsafSpTrapLdrToS | read-only | mandatory | System Alert: OS Loader Timeout. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.10.26 | ScalarsafSpTrapPFAS | read-only | mandatory | System Alert: Predictive Failure Analysis(PFA) information. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.10.27 | ScalarsafSpTrapSysLogS | read-only | mandatory | System Alert: System Log 75% full. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.10.28 | ScalarsafSpTrapNwChangeS | read-only | mandatory | System Alert: Network change notification. |
| 1.3.6.1.4.1.19046.11.1.3.1.1.20 | NodecustomSecuritySettings | |||
| 1.3.6.1.4.1.19046.11.1.3.1.1.20.1 | ScalarpasswordExpirationWarningPeriod | read-only | mandatory | The amount of time, in days, before password expiration that users will begin to receive warnings about the impending expiration of the user password. The mini… |
| 1.3.6.1.4.1.19046.11.1.3.1.1.20.2 | ScalarpasswordExpirationPeriod | read-only | mandatory | The amount of time, in days, that a user may use a password before it must be changed. Smaller values reduce the amount of time for attackers to guess password… |
| 1.3.6.1.4.1.19046.11.1.3.1.1.20.3 | ScalarminimumPasswordReuseCycle | read-only | mandatory | The minimum number of the times that a user must enter a unique password before the user can start to reuse passwords. A higher number enhances security. The m… |
| 1.3.6.1.4.1.19046.11.1.3.1.1.20.5 | ScalarminimumPasswordLength | read-only | mandatory | The minimum number of characters that can be used to specify a valid password. The minimum value is 8 characters and the maximum value is 20 characters. The de… |
| 1.3.6.1.4.1.19046.11.1.3.1.1.20.6 | ScalardefaultAdminPasswordExpired | read-only | mandatory | A value of 1 means that the factory default 'USERID' account password must be changed on next login. A value of 0 means that there is no such requirement. The … |
| 1.3.6.1.4.1.19046.11.1.3.1.1.20.8 | ScalarchangePasswordFirstAccess | read-only | mandatory | A value of 1 means that a user is required to change the password when the user logs in to the management server for the first time. A value of 0 means no such… |
| 1.3.6.1.4.1.19046.11.1.3.1.1.20.9 | ScalaraccountLockoutPeriod | read-only | mandatory | The minimum about of time, in minutes, that must pass before a user that was locked out can attempt to log back in again. The minimum value is 0 and the maximu… |
| 1.3.6.1.4.1.19046.11.1.3.1.1.20.10 | ScalarmaxLoginFailures | read-only | mandatory | The maximum number of times that a user can attempt to log in with an incorrect password before the user account is locked out. The number specified for the lo… |
| 1.3.6.1.4.1.19046.11.1.3.1.1.20.11 | ScalarpasswordChangeInterval | read-only | mandatory | The minimum about of time, in hours, that must elapse before a user may change a password again after it has been changed once. The value specified for this se… |
| 1.3.6.1.4.1.19046.11.1.3.1.2 | NodeserialPortCfg | |||
| 1.3.6.1.4.1.19046.11.1.3.1.2.1 | ScalarportBaud | read-only | mandatory | Baud rate for the serial port. |
| 1.3.6.1.4.1.19046.11.1.3.1.2.2 | ScalarportParity | read-only | mandatory | Parity setting for the serial port. |
| 1.3.6.1.4.1.19046.11.1.3.1.2.3 | NodeserialRedirect | |||
| 1.3.6.1.4.1.19046.11.1.3.1.2.3.1 | ScalarenterCLIkeySeq | read-only | mandatory | This is the keystroke sequence used to enter the CLI. This sequence must have at least one character. The caret symbol (^) has a special meaning in this sequen… |
| 1.3.6.1.4.1.19046.11.1.3.1.2.4 | ScalarportStopBits | read-only | mandatory | Number of stop bits for the serial port. |
| 1.3.6.1.4.1.19046.11.1.3.1.2.18 | ScalarportCLImode | read-only | mandatory | Use this field to select the CLI (command line interface) mode for this port. The CLI mode disablies serial redirect, or pecifies the type of keystroke sequenc… |
| 1.3.6.1.4.1.19046.11.1.3.1.3 | NoderemoteAlertIds | |||
| 1.3.6.1.4.1.19046.11.1.3.1.3.1 | TableremoteAlertIdsTable | not-accessible | mandatory | Table of remote alert entries. This table lets you configure remote alert recipients. You can define up to 12 unique recipients. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.1.1 | RowremoteAlertIdsEntry | not-accessible | mandatory | Remote alert entries. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.1.1.1 | ColumnremoteAlertIdEntryIndex | read-only | mandatory | Index for remote alert entry. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.1.1.2 | ColumnremoteAlertIdEntryStatus | read-only | mandatory | If enabled alerts will be sent to this alert recipient else alerts will not be sent. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.1.1.3 | ColumnremoteAlertIdEntryName | read-only | mandatory | A null terminated string that contains a text description of this entry. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.1.1.4 | ColumnremoteAlertIdEmailAddr | read-only | mandatory | A null terminated string that contains a E-Mail Address. For example '[email protected]'. Used only for a E-mail over Lan. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.1.1.5 | ColumnremoteAlertIdEntryCriticalAlert | read-only | mandatory | If Enabled,criticalAlerts will be sent to this remote alert receipient,else critical alerts will not be sent. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.1.1.6 | ColumnremoteAlertIdEntryWarningAlert | read-only | mandatory | If Enabled,warningAlerts will be sent to this remote alert receipient,else warningAlerts will not be sent. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.1.1.7 | ColumnremoteAlertIdEntrySystemAlert | read-only | mandatory | If Enabled,systemAlerts will be sent to this remote alert receipient,else systemAlerts will not be sent. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.1.1.8 | ColumnremoteAlertIdEntryAuditAlert | read-only | mandatory | If Enabled,systemAlerts will be sent to this remote alert receipient,else systemAlerts will not be sent. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.1.1.9 | ColumnremoteAlertIdEntryAttachmentsToEmailAlerts | read-only | mandatory | Indicates if the event log should be attached to a email alert. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.1.1.10 | ColumnremoteAlertIdEntrySyslogPortAssignment | read-only | mandatory | Syslog port number. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.1.1.11 | ColumnremoteAlertIdEntrySyslogHostname | read-only | mandatory | Syslog hostname or IP address. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.1.1.12 | ColumnremoteAlertIdEntryType | read-only | mandatory | Alert recipient type. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2 | TableremoteAlertFiltersTable | not-accessible | mandatory | Table of Alert Filters. The entries (rows) in this table correspond 1-1 with the entries in the remoteAlertIdsTable. They are correlated by index. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2.1 | RowremoteAlertFiltersEntry | not-accessible | mandatory | Remote Filters entries. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2.1.1 | ColumnrafIndex | read-only | mandatory | Index for User Authority Level entry. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2.1.2 | ColumnrafSpTrapTempC | read-only | mandatory | Critical Alert: Temperature threshold exceeded. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2.1.3 | ColumnrafSpTrapVoltC | read-only | mandatory | Critical Alert: Voltage threshold exceeded. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2.1.4 | ColumnrafSpTrapPowerC | read-only | mandatory | Critical Alert: Power failure. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2.1.5 | ColumnrafSpTrapHdC | read-only | mandatory | Critical Alert: Hard disk drive failure. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2.1.6 | ColumnrafSpTrapFanC | read-only | mandatory | Critical Alert: Single Fan failure. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2.1.7 | ColumnrafSpTrapIhcC | read-only | mandatory | Critical Alert: Incompatible hardware configuration. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2.1.8 | ColumnrafSpTrapCPUC | read-only | mandatory | Critical Alert: CPU Error. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2.1.9 | ColumnrafSpTrapMemoryC | read-only | mandatory | Critical Alert: Memory Error. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2.1.10 | ColumnrafSpTrapRdpsC | read-only | mandatory | Critical Alert: Redundant Power Supply failure. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2.1.11 | ColumnrafSpTrapHardwareC | read-only | mandatory | Critical Alert: Other Failure - refer to Message ID for specific condition. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2.1.12 | ColumnrafSpTrapRdpsN | read-only | mandatory | Non-Critical Alert: Redundant Power Supply failure. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2.1.13 | ColumnrafSpTrapTempN | read-only | mandatory | Non-Critical Alert: Temperature threshold exceeded. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2.1.14 | ColumnrafSpTrapVoltN | read-only | mandatory | Non-Critical Alert: Voltage threshold exceeded. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2.1.15 | ColumnrafSpTrapPowerN | read-only | mandatory | Non-Critical Alert: Power. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2.1.16 | ColumnrafSpTrapFanN | read-only | mandatory | Non-Critical Alert: Fan Error. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2.1.17 | ColumnrafSpTrapCPUN | read-only | mandatory | Non-Critical Alert: Memory Error. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2.1.18 | ColumnrafSpTrapMemoryN | read-only | mandatory | Non-Critical Alert: Memory Error. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2.1.19 | ColumnrafSpTrapHardwareN | read-only | mandatory | Non-Critical Alert: Warning - refer to Message ID for specific condition. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2.1.20 | ColumnrafSpTrapRLogin | read-only | mandatory | Sev-Off Alert: Event Remote Login. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2.1.21 | ColumnrafSpTrapOsToS | read-only | mandatory | System Alert: OS Timeout value exceeded. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2.1.22 | ColumnrafSpTrapAppS | read-only | mandatory | System Alert: Application Alert. Refer to Message ID for specific condition. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2.1.23 | ColumnrafSpTrapPowerS | read-only | mandatory | System Alert: Power On or Off. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2.1.24 | ColumnrafSpTrapBootS | read-only | mandatory | System Alert: System Boot Failure. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2.1.25 | ColumnrafSpTrapLdrToS | read-only | mandatory | System Alert: OS Loader Timeout. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2.1.26 | ColumnrafSpTrapPFAS | read-only | mandatory | System Alert: Predictive Failure Analysis(PFA) information. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2.1.27 | ColumnrafSpTrapSysLogS | read-only | mandatory | System Alert: System Log 75% full. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2.1.28 | ColumnrafSpTrapNwChangeS | read-only | mandatory | System Alert: Network change notification. |
| 1.3.6.1.4.1.19046.11.1.3.1.3.2.1.29 | ColumnrafSpTrapAllAuditS | read-only | mandatory | System Alert: All Audit Events notification. |
| 1.3.6.1.4.1.19046.11.1.3.1.4 | NoderemoteAccessIds | |||
| 1.3.6.1.4.1.19046.11.1.3.1.4.1 | TableremoteAccessIdsTable | not-accessible | mandatory | Table of remote access profiles. This table lets you to configure all login profiles. You can define up to 12 unique profiles. Note: By default, the remote sup… |
| 1.3.6.1.4.1.19046.11.1.3.1.4.1.1 | RowremoteAccessIdsEntry | not-accessible | mandatory | Remote access entries. |
| 1.3.6.1.4.1.19046.11.1.3.1.4.1.1.1 | ColumnremoteAccessIdEntryIndex | read-only | mandatory | Index for Remote access entry. |
| 1.3.6.1.4.1.19046.11.1.3.1.4.1.1.2 | ColumnremoteAccessIdEntryUserId | read-only | mandatory | Remote access entry null terminated string that contains the user-id. This can only be modified from blank to non-blank, then back to blank. |
| 1.3.6.1.4.1.19046.11.1.3.1.4.1.1.3 | ColumnremoteAccessIdEntryUserPwdLeftDays | read-only | mandatory | left days before password expired for selected user |
| 1.3.6.1.4.1.19046.11.1.3.1.4.2 | TableremoteAccessUserAuthorityLevelTable | not-accessible | mandatory | Table of user authority level profiles. |
| 1.3.6.1.4.1.19046.11.1.3.1.4.2.1 | RowremoteAccessUserAuthorityLevelEntry | not-accessible | mandatory | User authority level entries. |
| 1.3.6.1.4.1.19046.11.1.3.1.4.2.1.1 | ColumnualIndex | read-only | mandatory | Index for User Authority Level entry. |
| 1.3.6.1.4.1.19046.11.1.3.1.4.2.1.2 | ColumnualId | read-only | mandatory | User ID |
| 1.3.6.1.4.1.19046.11.1.3.1.4.2.1.3 | ColumnualSupervisor | read-only | mandatory | User has no restrictions. |
| 1.3.6.1.4.1.19046.11.1.3.1.4.2.1.4 | ColumnualReadOnly | read-only | mandatory | User has only read-only access, and cannot perform any save, modify, clear, or state affecting operations (eg. restart XCC, restore defaults, upgrade the firmw… |
| 1.3.6.1.4.1.19046.11.1.3.1.4.2.1.5 | ColumnualAccountManagement | read-only | mandatory | It is custom user authority level. User can add/modify/delete users and change the global login settings in the Login Profiles panel. NOTE: The value is meanin… |
| 1.3.6.1.4.1.19046.11.1.3.1.4.2.1.6 | ColumnualConsoleAccess | read-only | mandatory | It is custom user authority level. User can access the remote console. NOTE: The value is meaningless for this MIB object if the ualSupervisor or ualReadOnly i… |
| 1.3.6.1.4.1.19046.11.1.3.1.4.2.1.7 | ColumnualConsoleAndVirtualMediaAccess | read-only | mandatory | It is custom user authority level. User can access both the remote console and the virtual media feature. NOTE: The value is meaningless for this MIB object if… |
| 1.3.6.1.4.1.19046.11.1.3.1.4.2.1.8 | ColumnualServerPowerAccess | read-only | mandatory | It is custom user authority level. User can access the power on and restart functions for the remote server. These functions are available via the Power/Restar… |
| 1.3.6.1.4.1.19046.11.1.3.1.4.2.1.9 | ColumnualAllowClearLog | read-only | mandatory | It is custom user authority level. User can clear the event logs. Everyone can look at the event logs, but this particular permission is required to clear the … |
| 1.3.6.1.4.1.19046.11.1.3.1.4.2.1.10 | ColumnualAdapterBasicConfig | read-only | mandatory | It is custom user authority level. User can modify configuration parameters in the System Settings and Alerts panels. NOTE: The value is meaningless for this M… |
| 1.3.6.1.4.1.19046.11.1.3.1.4.2.1.11 | ColumnualAdapterNetworkAndSecurityConfig | read-only | mandatory | It is custom user authority level. User can modify configuration parameters in the Security, Network Protocols, Network Interface, Port Assignments, and Serial… |
| 1.3.6.1.4.1.19046.11.1.3.1.4.2.1.12 | ColumnualAdapterAdvancedConfig | read-only | mandatory | It is custom user authority level. User has no restrictions when configuring the adapter. In addition, the user is said to have administrative access to the XC… |
| 1.3.6.1.4.1.19046.11.1.3.1.5 | NodegroupProfiles | |||
| 1.3.6.1.4.1.19046.11.1.3.1.5.1 | TablegroupIdsTable | not-accessible | mandatory | Table of Group profiles. This table lets you to configure all group profiles. You can define up to 16 unique profiles. |
| 1.3.6.1.4.1.19046.11.1.3.1.5.1.1 | RowgroupIdsEntry | not-accessible | mandatory | Group ID entries. |
| 1.3.6.1.4.1.19046.11.1.3.1.5.1.1.1 | ColumngroupIndex | read-only | mandatory | Index for Group IDs entry. |
| 1.3.6.1.4.1.19046.11.1.3.1.5.1.1.2 | ColumngroupId | read-only | mandatory | Group ID. It is a null terminated string that contains the group-id. It must not be a duplicate of any previously configured ones. |
| 1.3.6.1.4.1.19046.11.1.3.1.5.1.1.3 | ColumngroupRole | read-only | mandatory | Group Role. It indicates if the group has supervisor, operator, or custom access. |
| 1.3.6.1.4.1.19046.11.1.3.1.5.2 | TablegroupRBSroleTable | not-accessible | mandatory | Table of Group Role profiles. |
| 1.3.6.1.4.1.19046.11.1.3.1.5.2.1 | RowgroupRBSroleEntry | not-accessible | mandatory | Group Role entries. |
| 1.3.6.1.4.1.19046.11.1.3.1.5.2.1.1 | ColumngroupRBSroleIndex | read-only | mandatory | Index for Group Role entry. |
| 1.3.6.1.4.1.19046.11.1.3.1.5.2.1.2 | ColumngroupRBSroleId | read-only | mandatory | Group ID |
| 1.3.6.1.4.1.19046.11.1.3.1.5.2.1.3 | ColumngroupRBSSupervisor | read-only | mandatory | Group has no restrictions. |
| 1.3.6.1.4.1.19046.11.1.3.1.5.2.1.4 | ColumngroupRBSOperator | read-only | mandatory | Group has read-only access, and cannot perform any save, modify, clear, or state affecting operations (e.g. restart XCC, restore defaults, upgrade the firmware… |
| 1.3.6.1.4.1.19046.11.1.3.1.5.2.1.5 | ColumngroupRBSNetworkSecurity | read-only | mandatory | Group can modify the configuration in the Security, Network Protocols, Network Interface, Port Assignments, and Serial Port panels. |
| 1.3.6.1.4.1.19046.11.1.3.1.5.2.1.6 | ColumngroupRBSUserAccountManagement | read-only | mandatory | Group can add/modify/delete users and change the Global Login Settings in the Login Profiles panel. |
| 1.3.6.1.4.1.19046.11.1.3.1.5.2.1.7 | ColumngroupRBSRemoteConsoleAccess | read-only | mandatory | Group can access the remote server console. |
| 1.3.6.1.4.1.19046.11.1.3.1.5.2.1.8 | ColumngroupRBSRemoteConsoleRemoteDiskAccess | read-only | mandatory | Group can access the remote server console and the remote disk functions for the remote server. |
| 1.3.6.1.4.1.19046.11.1.3.1.5.2.1.9 | ColumngroupRBSServerPowerRestartAccess | read-only | mandatory | Group can access the power on, restart and server timeout functions for the remote server. |
| 1.3.6.1.4.1.19046.11.1.3.1.5.2.1.10 | ColumngroupRBSBasicAdapterConfiguration | read-only | mandatory | Group can modify configuration parameters in the System Settings (excluding Contact, Location and Server Timeouts) and Alerts panels. |
| 1.3.6.1.4.1.19046.11.1.3.1.5.2.1.11 | ColumngroupRBSClearEventLog | read-only | mandatory | Group can clear the event logs. Everyone can look at the event logs, but this particular permission is required to clear the logs. |
| 1.3.6.1.4.1.19046.11.1.3.1.5.2.1.12 | ColumngroupRBSAdvancedAdapterConfiguration | read-only | mandatory | Group has no restrictions when configuring the adapter. In addition the user is said to have administrative access to the XCC, meaning that the user can also p… |
| 1.3.6.1.4.1.19046.11.1.3.1.6 | NodesshClientAuth | |||
| 1.3.6.1.4.1.19046.11.1.3.1.6.1 | TablesshClientAuthPubKeyTable | not-accessible | mandatory | A table that contains client authentication public key information. |
| 1.3.6.1.4.1.19046.11.1.3.1.6.1.1 | RowsshClientAuthPubKeyEntry | not-accessible | mandatory | A information list about a particular SSH public key used for client authentication. The primary table index is the same value as the associated remoteAccessId… |
| 1.3.6.1.4.1.19046.11.1.3.1.6.1.1.1 | ColumnsshClientAuthRemoteAccessIdIndex | not-accessible | mandatory | The primary table index is the same value as the associated remoteAccessIdEntryIndex used as an index into the remoteAccessIdsTable. |
| 1.3.6.1.4.1.19046.11.1.3.1.6.1.1.2 | ColumnsshClientAuthPubKeyIndex | not-accessible | mandatory | The secondary table index used to select one of the client authentication public keys for a particular remote access Id. The index is an integer value from 1 t… |
| 1.3.6.1.4.1.19046.11.1.3.1.6.1.1.3 | ColumnsshClientAuthPubKeyType | read-only | mandatory | The type of the SSH public key represented by this entry. |
| 1.3.6.1.4.1.19046.11.1.3.1.6.1.1.4 | ColumnsshClientAuthPubKeySize | read-only | mandatory | The size of the SSH public key represented by this entry. |
| 1.3.6.1.4.1.19046.11.1.3.1.6.1.1.5 | ColumnsshClientAuthPubKeyFingerprint | read-only | mandatory | The RSA fingerprint of the SSH public key represented by this entry. This value can be used with the SSH client to verify, on the initial connection, that the … |
| 1.3.6.1.4.1.19046.11.1.3.1.6.1.1.6 | ColumnsshClientAuthPubKeyAcceptFrom | read-only | mandatory | This is a filter that describes the set of SSH client IP addresses and host names that can establish SSH connections to the AMM authenticated by the public key… |
| 1.3.6.1.4.1.19046.11.1.3.1.6.2 | ScalarsshClientAuthPubKeyUnused | read-only | mandatory | The number of available storage locations that may be used to install additional Client Authentication Public Keys. This number decreases by one when a new key… |
| 1.3.6.1.4.1.19046.11.1.3.2 | NodespClock | |||
| 1.3.6.1.4.1.19046.11.1.3.2.1 | ScalarspClockDateAndTimeSetting | read-only | mandatory | Display XCC clock date and time setting, The format of the value is month/day/year, hour:minutes:seconds. |
| 1.3.6.1.4.1.19046.11.1.3.2.2 | ScalarspClockTimezoneSetting | read-only | mandatory | Display XCC clock Greenwich Mean Time(GMT) offset and Daylight Saving Time(DST) settings. The following table lists GMT offsets and associated DST information.… |
| 1.3.6.1.4.1.19046.11.1.3.3 | NodespIdentification | |||
| 1.3.6.1.4.1.19046.11.1.3.3.1 | ScalarspTxtId | read-only | mandatory | XCC text ID. |
| 1.3.6.1.4.1.19046.11.1.3.3.2 | ScalarspRoomID | read-only | mandatory | Room where the system is located. |
| 1.3.6.1.4.1.19046.11.1.3.3.3 | ScalarspRackID | read-only | mandatory | ID for Rack that contains this system. |
| 1.3.6.1.4.1.19046.11.1.3.3.4 | ScalarspRackUnitPosition | read-only | mandatory | Position within the rack for this system. |
| 1.3.6.1.4.1.19046.11.1.3.3.5 | ScalarspRackUnitHeight | read-only | mandatory | Number of rack units occupied by this system. |
| 1.3.6.1.4.1.19046.11.1.3.3.6 | ScalarspRackBladeBay | read-only | mandatory | Bay number for system contained in a blade chassis. |
| 1.3.6.1.4.1.19046.11.1.3.3.7 | ScalarspFullPostalAddress | read-only | mandatory | A NULL terminated 300 byte string that contains the full postal address for this system. |
| 1.3.6.1.4.1.19046.11.1.3.4 | NodenetworkConfiguration | |||
| 1.3.6.1.4.1.19046.11.1.3.4.1 | NodenetworkInterfaces | |||
| 1.3.6.1.4.1.19046.11.1.3.4.1.1 | NodeethernetInterface | |||
| 1.3.6.1.4.1.19046.11.1.3.4.1.1.1 | ScalarethernetInterfaceType | read-only | mandatory | The type of interface. Indicates 'Ethernet-1'. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.1.2 | ScalarethernetInterfaceEnabled | read-only | mandatory | Disable or enable the interface. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.1.3 | ScalarethernetInterfaceHostName | read-only | mandatory | Contains the 64 byte null terminated DNS host name for this interface. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.1.4 | ScalarethernetInterfaceIPAddress | read-only | mandatory | Contains the IP address for the ethernet interface. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.1.5 | ScalarethernetInterfaceAutoNegotiate | read-only | mandatory | If this is enabled, then we should ignore Speed/Duplex. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.1.6 | ScalarethernetInterfaceDataRate | read-only | mandatory | Specifies the data transfer rate to be used over the ethernet interface 10Mb/100Mb/Auto. Note that the value of this variable is ignored if ethernetInterfaceAu… |
| 1.3.6.1.4.1.19046.11.1.3.4.1.1.7 | ScalarethernetInterfaceDuplexSetting | read-only | mandatory | Specifies the duplex settings for the data transfer rate to be used over the ethernet interface Half/Full/Auto. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.1.8 | ScalarethernetInterfaceLAA | read-only | mandatory | Specifies the locally administered MAC address. The locally administered address must be a hexadecimal value between 000000000000 - FFFFFFFFFFFF. This value mu… |
| 1.3.6.1.4.1.19046.11.1.3.4.1.1.9 | ScalarethernetInterfaceDhcpEnabled | read-only | mandatory | Disable or enable DHCP on this interface. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.1.10 | ScalarethernetInterfaceGatewayIPAddress | read-only | mandatory | Contains the IP address of the gateway/router for the ethernet interface. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.1.11 | ScalarethernetInterfaceBIA | read-only | mandatory | Specifies the burned-in MAC (BIA) address. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.1.12 | ScalarethernetInterfaceMTU | read-only | mandatory | Contains the Maximum Transmission Unit(MTU) for the ethernet interface |
| 1.3.6.1.4.1.19046.11.1.3.4.1.1.13 | ScalarethernetInterfaceSubnetMask | read-only | mandatory | Contains the Subnet Mask for the ethernet interface |
| 1.3.6.1.4.1.19046.11.1.3.4.1.1.14 | NodedhcpEthernetInterface | |||
| 1.3.6.1.4.1.19046.11.1.3.4.1.1.14.1 | ScalardhcpHostName | read-only | mandatory | Contains the 64 byte null terminated DNS host name for this interface, assigned by the DHCP server. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.1.14.2 | ScalardhcpIPAddress | read-only | mandatory | Contains the IP address for the ehternet interface, assigned by the DHCP server. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.1.14.3 | ScalardhcpGatewayIPAddress | read-only | mandatory | Contains the IP address of the gateway/router for the ethernet interface, assigned by the DHCP server. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.1.14.4 | ScalardhcpSubnetMask | read-only | mandatory | Contains the Subnet Mask for the ethernet interface, assigned by the DHCP server. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.1.14.5 | ScalardhcpDomainName | read-only | mandatory | Contains the 64 byte null terminated Domain Name for this interface, assigned by the DHCP server. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.1.14.6 | ScalardhcpPrimaryDNSServer | read-only | mandatory | Contains the Primary DNS server, assigned by the DHCP server. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.1.14.7 | ScalardhcpSecondaryDNSServer | read-only | mandatory | Contains the Secondary DNS server, assigned by the DHCP server. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.1.14.8 | ScalardhcpTertiaryDNSServer | read-only | mandatory | Contains the tertiary DNS server, assigned by the DHCP server. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.1.15 | ScalarethernetInterfaceVlan | read-only | mandatory | If this is enabled, assign VLAN ID needs to be assigned. NOTE: This is not supported on blades. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.1.16 | ScalarethernetInterfaceVlanID | read-only | mandatory | Contains the VLAN ID for the ethernet interface. NOTE: This is not supported in blades. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.4 | NodeethernetInterfaceIPv6 | |||
| 1.3.6.1.4.1.19046.11.1.3.4.1.4.2 | ScalarethernetInterfaceIPv6Enabled | read-only | mandatory | The current IPv6 enabled or disabled state of this XCC. NOTE: If IPv6 address(es) have been configured for one or more interfaces/protocols/services on this XC… |
| 1.3.6.1.4.1.19046.11.1.3.4.1.4.5 | NodeethernetInterfaceIPv6Config | |||
| 1.3.6.1.4.1.19046.11.1.3.4.1.4.5.1 | NodeethernetInterfaceIPv6LocalAddress | |||
| 1.3.6.1.4.1.19046.11.1.3.4.1.4.5.1.1 | ScalarethernetInterfaceIPv6LinkLocalAddress | read-only | mandatory | The IPv6 link local IP address for the ethernet interface. NOTE: If ethernetInterfaceIPv6Enabled is currently disabled, this object has the value '0:0:0:0:0:0:… |
| 1.3.6.1.4.1.19046.11.1.3.4.1.4.5.2 | NodeethernetInterfaceIPv6StaticIPConfig | |||
| 1.3.6.1.4.1.19046.11.1.3.4.1.4.5.2.1 | ScalarethernetInterfaceIPv6StaticIPConfigEnabled | read-only | mandatory | The IPv6 static IP address enabled or disabled state for the ethernet interface. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.4.5.2.2 | ScalarethernetInterfaceIPv6StaticIPAddress | read-only | mandatory | The IPv6 static IP address for the ethernet interface. NOTE: If ethernetInterfaceIPv6Enabled is currently disabled, this object has the value '0:0:0:0:0:0:0:0'. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.4.5.2.3 | ScalarethernetInterfaceIPv6StaticIPAddressPrefixLen | read-only | mandatory | The IPv6 static IP address prefix length for the ethernet interface. NOTE: If ethernetInterfaceIPv6Enabled is currently disabled, this object has the value 0. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.4.5.2.4 | ScalarethernetInterfaceIPv6StaticIPDefaultRoute | read-only | mandatory | The IPv6 static IP address default route for the ethernet interface. NOTE: If ethernetInterfaceIPv6Enabled is currently disabled, this object has the value '0:… |
| 1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3 | NodeethernetInterfaceIPv6AutoIPConfig | |||
| 1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3.2 | NodeethernetInterfaceDHCPv6Config | |||
| 1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3.2.1 | ScalarethernetInterfaceDHCPv6Enabled | read-only | mandatory | The DHCPv6 enabled or disabled state for the ethernet interface. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3.2.2 | ScalarethernetInterfaceDHCPv6IPAddress | read-only | mandatory | The IPv6 address for the ethernet interface, assigned by DHCPv6 server. NOTE: If ethernetInterfaceIPv6Enabled or ethernetInterfaceDHCPv6Enabled is disabled or … |
| 1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3.2.4 | ScalarethernetInterfaceDHCPv6DomainName | read-only | mandatory | The 64 byte Domain Name for the ethernet interface, assigned by the DHCPv6 server. NOTE: If ethernetInterfaceIPv6Enabled or ethernetInterfaceDHCPv6Enabled is d… |
| 1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3.2.5 | ScalarethernetInterfaceDHCPv6PrimaryDNSServer | read-only | mandatory | The primary DNS server, assigned by the DHCPv6 server. NOTE: If ethernetInterfaceIPv6Enabled or ethernetInterfaceDHCPv6Enabled is disabled or if DHCPv6 server … |
| 1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3.2.6 | ScalarethernetInterfaceDHCPv6SecondaryDNSServer | read-only | mandatory | The secondary DNS server, assigned by the DHCPv6 server. NOTE: If ethernetInterfaceIPv6Enabled or ethernetInterfaceDHCPv6Enabled is disabled or if DHCPv6 serve… |
| 1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3.2.7 | ScalarethernetInterfaceDHCPv6TertiaryDNSServer | read-only | mandatory | The tertiary DNS server, assigned by the DHCPv6 server. NOTE: If ethernetInterfaceIPv6Enabled or ethernetInterfaceDHCPv6Enabled is disabled or if DHCPv6 server… |
| 1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3.2.8 | ScalarethernetInterfaceDHCPv6Server | read-only | mandatory | The DHCPv6 server IPv6 address used to acquire the DHCP settings. NOTE: If ethernetInterfaceIPv6Enabled or ethernetInterfaceDHCPv6Enabled is disabled or if DHC… |
| 1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3.3 | NodeethernetInterfaceIPv6StatelessAutoConfig | |||
| 1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3.3.1 | ScalarethernetInterfaceIPv6StatelessAutoConfigEnabled | read-only | mandatory | The IPv6 stateless auto-configuration enabled or disabled state for the ethernet interface. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3.3.2 | TableethernetInterfaceStatelessAutoConfigAddressesTable | not-accessible | mandatory | Table of stateless Auto-Config addresses entries |
| 1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3.3.2.1 | RowethernetInterfaceStatelessAutoConfigAddressesEntry | not-accessible | mandatory | Stateless Auto-Config address entries |
| 1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3.3.2.1.1 | ColumnethernetInterfaceStatelessAutoConfigAddressesIndex | read-only | mandatory | Index for stateless Auto-Config addresses. NOTE: If ethernetInterfaceIPv6StatelessAutoConfigEnabled or ethernetInterfaceIPv6Enabled is currently disabled, this… |
| 1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3.3.2.1.2 | ColumnethernetInterfaceStatelessAutoConfigAddresses | read-only | mandatory | The stateless Auto-Configuration IPv6 address. NOTE: If ethernetInterfaceIPv6StatelessAutoConfigEnabled or ethernetInterfaceIPv6Enabled is currently disabled, … |
| 1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3.3.2.1.3 | ColumnethernetInterfaceStatelessAutoConfigAddressesPrefixLen | read-only | mandatory | The stateless Auto-Configration address prefix length. NOTE: If ethernetInterfaceIPv6StatelessAutoConfigEnabled or ethernetInterfaceIPv6Enabled is currently di… |
| 1.3.6.1.4.1.19046.11.1.3.4.1.5 | NodevlansSM | |||
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.1 | NodevlansSMvlan1config | |||
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.1.1 | ScalarvlansSMvlan1Name | read-only | mandatory | The name of VLAN1, 1-64 characters. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.1.2 | ScalarvlansSMvlan1vlanId | read-only | mandatory | The VLAN ID for VLAN1. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.1.3 | ScalarvlansSMvlan1State | read-only | mandatory | The state of VLAN1 |
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.1.4 | ScalarvlansSMvlan1RemoteControl | read-only | mandatory | The state of the Remote Control feature for VLAN1. Note that Remote Control can only be enabled on one VLAN. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.1.5 | ScalarvlansSMvlan1SSerialOverLan | read-only | mandatory | The state of the Serail Over LAN feature for VLAN1. Note that Serial Over LAN can only be enabled on one VLAN. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.2 | NodevlansSMvlan2config | |||
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.2.1 | ScalarvlansSMvlan2Name | read-only | mandatory | The name of VLAN1, 1-64 characters. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.2.2 | ScalarvlansSMvlan2vlanId | read-only | mandatory | The VLAN ID for VLAN2. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.2.3 | ScalarvlansSMvlan2State | read-only | mandatory | The state of VLAN2 |
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.2.4 | ScalarvlansSMvlan2RemoteControl | read-only | mandatory | The state of the Remote Control feature for VLAN2. Note that Remote Control can only be enabled on one VLAN. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.2.5 | ScalarvlansSMvlan2SerialOverLan | read-only | mandatory | The state of the Serail Over LAN feature for VLAN2. Note that Serial Over LAN can only be enabled on one VLAN. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.2.6 | NodevlansSMvlan2ipv4Config | |||
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.2.6.1 | ScalarvlansSMvlan2IPv4Address | read-only | mandatory | Contains the IPv4 address for the VLAN2 interface. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.2.6.2 | ScalarvlansSMvlan2IPv4Gateway | read-only | mandatory | Contains the Gateway IPv4 address for the VLAN2 interface. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.2.6.3 | ScalarvlansSMvlan2IPv4SubnetMask | read-only | mandatory | Contains the Subnet Mask for the IPv4 address for the VLAN2 interface. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.2.7 | NodevlansSMvlan2ipv6Config | |||
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.2.7.1 | ScalarvlansSMvlan2IPv6Address | read-only | mandatory | Contains the IPv6 address for the VLAN2 interface. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.2.7.2 | ScalarvlansSMvlan2IPv6Gateway | read-only | mandatory | Contains the Gateway IPv6 address for the VLAN2 interface. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.2.7.3 | ScalarvlansSMvlan2IPv6PrefixLength | read-only | mandatory | Contains the Prefix Length for the IPv6 address for the VLAN2 interface. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.2.8 | NodevlansSMvlan2ipv4StatusRoutes | |||
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.2.8.1 | ScalarvlansSMvlan2IPv4StaticRouteIP1 | read-only | mandatory | Contains the IPv4 address for the first IPv4 static route. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.2.8.2 | ScalarvlansSMvlan2IPv4StaticRouteSM1 | read-only | mandatory | Contains the Subnet Mask for the first IPv4 static route. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.2.8.3 | ScalarvlansSMvlan2IPv4StaticRouteIP2 | read-only | mandatory | Contains the IPv4 address for the second IPv4 static route. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.2.8.4 | ScalarvlansSMvlan2IPv4StaticRouteSM2 | read-only | mandatory | Contains the Subnet Mask for the second IPv4 static route. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.2.8.5 | ScalarvlansSMvlan2IPv4StaticRouteIP3 | read-only | mandatory | Contains the IPv4 address for the third IPv4 static route. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.2.8.6 | ScalarvlansSMvlan2IPv4StaticRouteSM3 | read-only | mandatory | Contains the Subnet Mask for the third IPv4 static route. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.2.9 | NodevlansSMvlan2ipv6StatusRoutes | |||
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.2.9.1 | ScalarvlansSMvlan2IPv6StaticRouteIP1 | read-only | mandatory | Contains the IPv6 address for the first IPv6 static route. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.2.9.2 | ScalarvlansSMvlan2IPv6StaticRoutePL1 | read-only | mandatory | Contains the Prefix Length for the first IPv6 static route. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.2.9.3 | ScalarvlansSMvlan2IPv6StaticRouteIP2 | read-only | mandatory | Contains the IPv6 address for the second IPv6 static route. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.2.9.4 | ScalarvlansSMvlan2IPv6StaticRoutePL2 | read-only | mandatory | Contains the Prefix Length for the second IPv6 static route. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.2.9.5 | ScalarvlansSMvlan2IPv6StaticRouteIP3 | read-only | mandatory | Contains the IPv6 address for the third IPv6 static route. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.2.9.6 | ScalarvlansSMvlan2IPv6StaticRoutePL3 | read-only | mandatory | Contains the Prefix Length for the third IPv6 static route. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.3 | NodevlansSMvlanControl | |||
| 1.3.6.1.4.1.19046.11.1.3.4.1.5.3.1 | ScalarvlansSMvlanConfigRevertTimout | read-only | mandatory | Contains the VLAN Config Revert Timeout value. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.10 | ScalarddnsStatus | read-only | mandatory | Dynamic DNS provides the capability for a networked device to notify a domain name server to change, in real time, the active DNS configuration of its configur… |
| 1.3.6.1.4.1.19046.11.1.3.4.1.11 | ScalarhostName | read-only | mandatory | Contains the DNS host name for this system. This object provides the exact same function as ethernetInterfaceHostName |
| 1.3.6.1.4.1.19046.11.1.3.4.1.12 | ScalarddnsDomainToUse | read-only | mandatory | The domain name to be used with Dynamic DNS. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.13 | ScalardomainName | read-only | mandatory | The user assigned DNS domain name. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.14 | NodelanOverUSBInterface | |||
| 1.3.6.1.4.1.19046.11.1.3.4.1.14.1 | ScalarxccUSBIPAddress | read-only | mandatory | Contains the IP address for the LAN over USB of XCC. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.14.2 | ScalarxccUSBSubnetMask | read-only | mandatory | Contains the Subnet Mask for the LAN over USB of XCC. |
| 1.3.6.1.4.1.19046.11.1.3.4.1.14.3 | ScalarosUSBIPAddress | read-only | mandatory | Contains the IP address for the LAN over USB of OS. |
| 1.3.6.1.4.1.19046.11.1.3.4.2 | NodetcpProtocols | |||
| 1.3.6.1.4.1.19046.11.1.3.4.2.1 | NodesnmpAgentConfig | |||
| 1.3.6.1.4.1.19046.11.1.3.4.2.1.1 | ScalarsnmpSystemName | read-only | mandatory | A NULL terminated 48 byte string that contains the SNMP agent name. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.1.2 | ScalarsnmpSystemContact | read-only | mandatory | A NULL terminated 48 byte string that contains the SNMP agent contact name. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.1.3 | ScalarsnmpSystemLocation | read-only | mandatory | A NULL terminated 48 byte string that contains the SNMP agent location name. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.1.4 | ScalarsnmpSystemAgentTrapsDisable | read-only | mandatory | Disable or enable SNMP V1 and V3 traps. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.1.5 | NodesnmpAgentCommunityConfig | |||
| 1.3.6.1.4.1.19046.11.1.3.4.2.1.5.1 | ScalarsnmpCommunityEntryCommunityName | read-only | mandatory | SNMP Community entry name. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.1.5.2 | ScalarsnmpCommunityEntryCommunityIpAddress | read-only | mandatory | SNMP Community IP address or host name. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.1.7 | Scalarsnmpv3SystemAgentEnable | read-only | mandatory | Disable or enable the SNMPv3 agent. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.1.8 | NodesnmpAgentUserProfileConfig | |||
| 1.3.6.1.4.1.19046.11.1.3.4.2.1.8.1 | TablesnmpUserProfileTable | not-accessible | mandatory | Table of SNMPv3 User Profile entries |
| 1.3.6.1.4.1.19046.11.1.3.4.2.1.8.1.1 | RowsnmpUserProfileEntry | not-accessible | mandatory | SNMP User Profile entries |
| 1.3.6.1.4.1.19046.11.1.3.4.2.1.8.1.1.1 | ColumnsnmpUserProfileEntryIndex | read-only | mandatory | Index for SNMPv3 Agent User Profile entry. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.1.8.1.1.2 | ColumnsnmpUserProfileEntryAuthProt | read-only | mandatory | SNMPv3 User Profile entry - Authentication Protocol supported by the user. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.1.8.1.1.3 | ColumnsnmpUserProfileEntryPrivProt | read-only | mandatory | SNMPv3 User Profile entry - Privacy Protocol supported by the user. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.1.8.1.1.5 | ColumnsnmpUserProfileEntryViewType | read-only | mandatory | SNMPv3 User Profile entry - Access level (Get) of the user. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.1.8.1.1.6 | ColumnsnmpUserProfileEntryIpAddress | read-only | mandatory | SNMPv3 User Profile entry - IP address or host name. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.2 | NodednsConfig | |||
| 1.3.6.1.4.1.19046.11.1.3.4.2.2.1 | ScalardnsEnabled | read-only | mandatory | Disable or enable the DNS agent. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.2.2 | ScalardnsServerIPAddress1 | read-only | mandatory | Contains the primary DNS server IP address. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.2.3 | ScalardnsServerIPAddress2 | read-only | mandatory | Contains the secondary DNS server IP address. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.2.4 | ScalardnsServerIPAddress3 | read-only | mandatory | Contains the tertiary DNS server IP address. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.2.12 | ScalardnsServerIPv6Address1 | read-only | mandatory | Contains the primary IPv6 DNS server address. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.2.13 | ScalardnsServerIPv6Address2 | read-only | mandatory | Contains the secondary IPv6 DNS server address. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.2.14 | ScalardnsServerIPv6Address3 | read-only | mandatory | Contains the tertiary IPv6 DNS server address. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.2.20 | ScalardnsPriority | read-only | mandatory | Tells the order host names are resolved. The options are to either first resolve with an IPv6 DNS server or to first resolve with an IPv6 DNS server. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.2.21 | ScalardnsLXCADiscovery | read-only | mandatory | Disable or enable LXCA discovery using DNS SRV records. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.3 | NodesmtpConfig | |||
| 1.3.6.1.4.1.19046.11.1.3.4.2.3.1 | ScalarsmtpServerNameOrIPAddress | read-only | mandatory | A NULL terminated 64 byte string that contains the SMTP server Host name or IP address(a.b.c.d). |
| 1.3.6.1.4.1.19046.11.1.3.4.2.3.2 | ScalarsmtpServerPort | read-only | mandatory | SMTP server port number. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.3.3 | ScalarsmtpServerAuthentication | read-only | mandatory | Enable/disable SMTP-AUTH function. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.3.4 | ScalarsmtpServerAuthenticationUser | read-only | mandatory | SMTP authentication user name |
| 1.3.6.1.4.1.19046.11.1.3.4.2.3.6 | ScalarsmtpServerAuthenticationMethod | read-only | mandatory | SMTP authentication method , support CRAM-MD5 and PLAIN only |
| 1.3.6.1.4.1.19046.11.1.3.4.2.3.7 | ScalarsmtpServerReversePath | read-only | mandatory | A NULL terminated 256 byte string that contains the SMTP Reverse Path. The user can substitute their own sender information in place of the XCC default sender … |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4 | NodetcpApplicationConfig | |||
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.2 | ScalarslpAddrType | read-only | mandatory | Get SLP address type. Note that when slpAddrType is broadast then the multicast address in slpMulticastAddt will be ignored. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.3 | ScalarslpMulticastAddr | read-only | mandatory | Service Locator Protocol Multicast address |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.5 | NodesshServerConfig | |||
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.5.1 | ScalarsshServerHostKeySize | read-only | mandatory | The size of the public/private host key pair. NOTE: The XCC supports only the bits1048 value. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.5.2 | ScalarsshServerHostKeyFingerprint | read-only | mandatory | The RSA fingerprint of the public part of the host key pair. This value can be used with the SSH client to verify, on the initial connection, that the Secure S… |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.5.5 | ScalarsshEnable | read-only | mandatory | Disable/Enable SSH. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.6 | NodesslConfig | |||
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.6.1 | ScalarsslEnableHTTPSforWeb | read-only | mandatory | Get the status for web HTTPS service. To use SSL, a client web browser must be configured to use SSL3 and/or TLS. Older export-grade browsers with only SSL2 su… |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.6.2 | ScalarsslEnableHTTPSforCIMXML | read-only | mandatory | Get the status for CIM over HTTPS service. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.6.3 | ScalarsslEnableSecureClientLDAP | read-only | mandatory | Get the status of the Secure LDAP Client. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.6.4 | NodesslServerCertificate | |||
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.6.4.1 | ScalarsslServerCertificateStatus | read-only | mandatory | Get the status of the installed HTTPS certificate. 1 = Private Key and Cert/CSR not available. 2 = Private Key and Self-signed cert installed. 3 = Private Key … |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.6.4.2 | ScalarsslServerCertificateExpirationDate | read-only | mandatory | Expiration date of the installed HTTPS certificate. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.6.5 | NodesslLDAPTrustedCertificate | |||
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.6.5.1 | ScalarsslLDAPTrustedCertificate1Status | read-only | mandatory | Get the status of the LDAP trusted certificate #1. 0 = certificate not installed 1 = certificate installed. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.6.5.2 | ScalarsslLDAPTrustedCertificate1ExpirationDate | read-only | mandatory | Expiration date of the LDAP trusted certificate #1 if it is installed. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.6.5.3 | ScalarsslLDAPTrustedCertificate2Status | read-only | mandatory | Get the status of the LDAP trusted certificate #2. 0 = certificate not installed 1 = certificate installed. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.6.5.4 | ScalarsslLDAPTrustedCertificate2ExpirationDate | read-only | mandatory | Expiration date of the LDAP trusted certificate #2 if it is installed.. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.6.5.5 | ScalarsslLDAPTrustedCertificate3Status | read-only | mandatory | Get the status of the LDAP trusted certificate #3. 0 = certificate not installed 1 = certificate installed. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.6.5.6 | ScalarsslLDAPTrustedCertificate3ExpirationDate | read-only | mandatory | Expiration date of the LDAP trusted certificate #3 if it is installed. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.6.5.7 | ScalarsslLDAPTrustedCertificate4Status | read-only | mandatory | Get the status of the LDAP trusted certificate #4. 0 = certificate not installed 1 = certificate installed. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.6.5.8 | ScalarsslLDAPTrustedCertificate4ExpirationDate | read-only | mandatory | Expiration date of the LDAP trusted certificate #4 if it is installed. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.8 | NodecertDomainNames | |||
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.8.1 | TablecertDomainNameTable | not-accessible | mandatory | This table contains certificate domain names and status. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.8.1.1 | RowcertDomainNameEntry | not-accessible | mandatory | Each row contains a certificate domain name and status. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.8.1.1.1 | ColumncertDomainNameIndex | read-only | mandatory | The index number of one certificate domain name entry. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.8.1.1.2 | ColumncertDomainName | read-only | mandatory | The Certificate Domain Name of one certificate domain name entry. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.8.1.1.3 | ColumncertDomainNameStatus | read-only | mandatory | The status of the Certificate Domain Name entry. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.9 | NodeskrServers | |||
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.9.1 | TableskrServerTable | not-accessible | mandatory | This table contains Storage Key Repository Server hostnames and ports. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.9.1.1 | RowskrServerEntry | not-accessible | mandatory | Each row contains a Storage Key Repository Server hostname and port. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.9.1.1.1 | ColumnskrServerIndex | read-only | mandatory | The index number of one Storage Key Repository Server entry. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.9.1.1.2 | ColumnskrServerHostname | read-only | mandatory | Storage Key Repository Server hostname or IP address. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.9.1.1.3 | ColumnskrServerPort | read-only | mandatory | Storage Key Repository Server port number. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.9.3 | ScalarskrDeviceGroup | read-only | mandatory | An optional NULL terminated 16 character string that contains the Device Group that the server drives belong to. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.9.4 | NodeskrClientConfigCertficate | |||
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.9.4.3 | ScalarskrClientCertificateStatus | read-only | mandatory | Get the status of the installed Web certificates. 1 = Private Key and Cert/CSR not available. 2 = Private Key and Self-signed cert installed. 3 = Private Key a… |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.9.4.4 | ScalarskrClientCertificateExpirationDate | read-only | mandatory | Expiration date of the SKR client certificate. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.4.9.12 | ScalarskrServerCertificateExpirationDate | read-only | mandatory | Expiration date of the SKR Server certificate. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.5 | NodetcpPortAssignmentCfg | |||
| 1.3.6.1.4.1.19046.11.1.3.4.2.5.2 | ScalarhttpPortAssignment | read-only | mandatory | HTTP port number. Default value is 80. Once changed, the url's have to include :port at the end. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.5.3 | ScalarhttpsPortAssignment | read-only | mandatory | SSL port number. Default value is 443. Once changed, the url's have to include :port at the end. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.5.6 | ScalarsshLegacyCLIPortAssignment | read-only | mandatory | SSH port number. Default value is 22. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.5.8 | ScalarsnmpAgentPortAssignment | read-only | mandatory | SNMP Agent port number. Default value is 161. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.5.9 | ScalarsnmpTrapsPortAssignment | read-only | mandatory | SNMP Traps port number. Default value is 162. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.5.10 | ScalarremvidPortAssignment | read-only | mandatory | Remote Console port number. Default value is 3900. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.5.12 | ScalarcimOverHttpsPortAssignment | read-only | mandatory | CIM over Https port number. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.6 | NodeldapClientCfg | |||
| 1.3.6.1.4.1.19046.11.1.3.4.2.6.1 | ScalarldapServer1NameOrIPAddress | read-only | mandatory | A NULL terminated 64 byte string that contains the LDAP server host name or IP address (a.b.c.d). |
| 1.3.6.1.4.1.19046.11.1.3.4.2.6.2 | ScalarldapServer1PortNumber | read-only | mandatory | LDAP server port number. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.6.3 | ScalarldapServer2NameOrIPAddress | read-only | mandatory | A NULL terminated 64 byte string that contains the LDAP server host name or IP address (a.b.c.d). |
| 1.3.6.1.4.1.19046.11.1.3.4.2.6.4 | ScalarldapServer2PortNumber | read-only | mandatory | LDAP server port number. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.6.5 | ScalarldapServer3NameOrIPAddress | read-only | mandatory | A NULL terminated 64 byte string that contains the LDAP server host name or IP address (a.b.c.d). |
| 1.3.6.1.4.1.19046.11.1.3.4.2.6.6 | ScalarldapServer3PortNumber | read-only | mandatory | LDAP server port number. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.6.7 | ScalarldapServer4NameOrIPAddress | read-only | mandatory | A NULL terminated 64 byte string that contains the LDAP server host name or IP address (a.b.c.d). |
| 1.3.6.1.4.1.19046.11.1.3.4.2.6.8 | ScalarldapServer4PortNumber | read-only | mandatory | LDAP server port number. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.6.9 | ScalarldapRootDN | read-only | mandatory | Distinguished Name for root entry of directory tree. An example might look like dn=foobar,dn=com. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.6.11 | ScalarldapGroupFilter | read-only | mandatory | This filter is used for group authentication. It specifies what group or groups that this MM belongs to. If left blank, group authentication is disabled. Other… |
| 1.3.6.1.4.1.19046.11.1.3.4.2.6.12 | ScalarldapBindingMethod | read-only | mandatory | On initial binds to the LDAP server during user authentication, there are three options: Anonymous authentication: Bind attempt is made without a client DN or … |
| 1.3.6.1.4.1.19046.11.1.3.4.2.6.13 | ScalarldapClientAuthenticationDN | read-only | mandatory | The initial bind to the LDAP server during user authentication can be performed with anonymous authentication, client based authentication, or UPN. The client … |
| 1.3.6.1.4.1.19046.11.1.3.4.2.6.15 | ScalarldapRoleBasedSecurityEnabled | read-only | mandatory | A value of true for RoleBasedSecurityEnabled indicates enhanced will be used by the service processor. A value of false for RoleBasedSecurityEnabled indicates … |
| 1.3.6.1.4.1.19046.11.1.3.4.2.6.16 | ScalarldapServerTargetName | read-only | mandatory | When administrator chooses Enhanced Role Based Security authentication model, he can associate one XCC with one managed target object in Snap-in (one tool to c… |
| 1.3.6.1.4.1.19046.11.1.3.4.2.6.17 | ScalarldapUIDsearchAttribute | read-only | mandatory | When the binding method selected is Anonymous authentication or Client authentication, the initial bind to the LDAP server is followed by a search request aime… |
| 1.3.6.1.4.1.19046.11.1.3.4.2.6.18 | ScalarldapGroupSearchAttribute | read-only | mandatory | When the MM Group Filter name is configured, it is necessary to retrieve from the LDAP server the list of groups that a particular user belongs to. This is req… |
| 1.3.6.1.4.1.19046.11.1.3.4.2.6.19 | ScalarldapLoginPermissionAttribute | read-only | mandatory | When a user successfully authenticates via a LDAP server, it is necessary to retrieve the login permissions for this user. In order to retrieve these permissio… |
| 1.3.6.1.4.1.19046.11.1.3.4.2.6.20 | ScalarldapUseDNSOrPreConfiguredServers | read-only | mandatory | The MM contains a Version 2.0 LDAP Client that may be configured to provide user authentication through one or more LDAP servers. The LDAP server(s) to be used… |
| 1.3.6.1.4.1.19046.11.1.3.4.2.6.21 | ScalarldapDomainSource | read-only | mandatory | The DNS SRV request sent to the DNS server must specify a domain name. The LDAP client will determine where to get this domain name based on one of the followi… |
| 1.3.6.1.4.1.19046.11.1.3.4.2.6.22 | ScalarldapForestName | read-only | mandatory | In order to discover Global Catalogs (GC), the forest name must be configured in the ForestName property. The Global Catalogs are required for users who belong… |
| 1.3.6.1.4.1.19046.11.1.3.4.2.6.23 | ScalarldapAuthCfg | read-only | mandatory | If ldapAuthCfg is set to 0, LDAP server is used to authenticate and authorize users. If it is set to 1, LDAP server is only used to authenticate users. Note:LD… |
| 1.3.6.1.4.1.19046.11.1.3.4.2.6.24 | ScalarldapSearchDomain | read-only | mandatory | This parameter may be used as the domain name in the DNS SRV request, depending on how the Domain Source parameter is configured. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.6.25 | ScalarldapServiceName | read-only | mandatory | The DNS SRV request sent to the DNS server must also specify a service name. The configured value will be used for this purpose. If left blank, the default val… |
| 1.3.6.1.4.1.19046.11.1.3.4.2.8 | NodentpConfig | |||
| 1.3.6.1.4.1.19046.11.1.3.4.2.8.1 | ScalarntpEnable | read-only | mandatory | Disable/Enable the NTP client. The client will update the XCC system clock at the frequency specified. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.8.2 | ScalarntpIpAddressHostname1 | read-only | mandatory | First NTP server's IP address or hostname if DNS is enabled and configured. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.8.3 | ScalarntpUpdateFrequency | read-only | mandatory | The frequency in minutes that the NTP service runs. The value range is 3 to 1440. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.8.4 | ScalarntpIpAddressHostname2 | read-only | mandatory | Second NTP server's IP address or hostname if DNS is enabled and configured. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.8.6 | ScalarntpIpAddressHostname3 | read-only | mandatory | Third NTP server's IP address or hostname if DNS is enabled and configured. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.8.7 | ScalarntpIpAddressHostname4 | read-only | mandatory | Fourth NTP server's IP address or hostname if DNS is enabled and configured. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.10 | NodeipmiConfig | |||
| 1.3.6.1.4.1.19046.11.1.3.4.2.10.1 | ScalaripmiStatus | read-only | mandatory | Get the status of IPMI service |
| 1.3.6.1.4.1.19046.11.1.3.4.2.11 | NodecimxmlConfig | |||
| 1.3.6.1.4.1.19046.11.1.3.4.2.11.1 | ScalarcimxmlStatus | read-only | mandatory | Get the status of CIM service. |
| 1.3.6.1.4.1.19046.11.1.3.4.2.12 | NoderestConfig | |||
| 1.3.6.1.4.1.19046.11.1.3.4.2.12.1 | ScalarrestStatus | read-only | mandatory | Get the status of the REST over HTTPS. |
| 1.3.6.1.4.1.19046.11.1.3.7 | ScalarxccVersionCheck | read-only | mandatory | Get the XCC version type. |
| 1.3.6.1.4.1.19046.11.1.4 | NodegeneralSystemSettings | |||
| 1.3.6.1.4.1.19046.11.1.4.1 | NodeserverTimers | |||
| 1.3.6.1.4.1.19046.11.1.4.1.1 | ScalaroSHang | read-only | mandatory | Number, in 1 second intervals, the XCC will check to insure the OS is operating properly. If the operating system fails to respond within 6 seconds to one of t… |
| 1.3.6.1.4.1.19046.11.1.4.1.2 | ScalaroSLoader | read-only | mandatory | Number in 30 second intervals the remote XCC will wait between completion of POST and the end of loading the OS. If this interval is exceeded, the XCC will gen… |
| 1.3.6.1.4.1.19046.11.1.4.2 | ScalarnetworkPXEboot | read-only | mandatory | Modify the system's boot sequence for the next system restart in order to attempt a PXE/DHCP network boot. The system's boot sequence(set via the BIOS settings… |
| 1.3.6.1.4.1.19046.11.1.5 | NodesystemPower | |||
| 1.3.6.1.4.1.19046.11.1.5.1 | NodepowerStatistics | |||
| 1.3.6.1.4.1.19046.11.1.5.1.1 | ScalarcurrentSysPowerStatus | read-only | mandatory | Indicates if the system is currently powered on, off, or in sleep state. |
| 1.3.6.1.4.1.19046.11.1.5.1.2 | ScalarpowerOnHours | read-only | mandatory | Number of hours the system has been powered on. |
| 1.3.6.1.4.1.19046.11.1.5.1.3 | ScalarrestartCount | read-only | mandatory | Number of times the system has been restarted. |
| 1.3.6.1.4.1.19046.11.1.5.1.4 | ScalarsystemState | read-only | mandatory | Shows the current operational state of the system. |
| 1.3.6.1.4.1.19046.11.1.5.2 | NodepowerSysConfig | |||
| 1.3.6.1.4.1.19046.11.1.5.2.1 | ScalarpowerSysOffDelay | read-only | mandatory | The number of 1 second interval the XCC will wait before powering off the system. |
| 1.3.6.1.4.1.19046.11.1.5.2.2 | ScalarpowerSysOnClockSetting | read-only | mandatory | The clock setting used to determine when the XCC will power on the system. For example the value '03/04/2001,06:00' means that the system will power on March 4… |
| 1.3.6.1.4.1.19046.11.1.5.5 | NodepowerCyclingSchedule | |||
| 1.3.6.1.4.1.19046.11.1.5.5.1 | ScalarschedulePowerOffWithOsShutdown | read-only | mandatory | Power Off the system after performing a OS shutdown at specified time and day of the week. Example: Monday,09:00, To reset, the value as Never,00:00. |
| 1.3.6.1.4.1.19046.11.1.5.5.2 | ScalarschedulePowerOnSystem | read-only | mandatory | Power On the system at specified time and day of the week. Example: Monday,09:00. To reset, the value as Never,00:00. |
| 1.3.6.1.4.1.19046.11.1.8 | NodeserviceAdvisor | |||
| 1.3.6.1.4.1.19046.11.1.8.1 | NodeautoCallHomeSetup | |||
| 1.3.6.1.4.1.19046.11.1.8.1.1 | ScalaracceptLicenseAgreement | read-only | mandatory | Accept Terms and Conditions of Service Advisor. The user will have to accept the terms and conditions before Service Advisor can send diagnostic data to suppor… |
| 1.3.6.1.4.1.19046.11.1.8.1.2 | ScalarserviceAdvisorEnable | read-only | mandatory | Disable/Enable Call Home Support. The User Agreement must be accepted and the contact information must be set before the Call Home Support function of Service … |
| 1.3.6.1.4.1.19046.11.1.8.2 | NodeserviceSupportCenter | |||
| 1.3.6.1.4.1.19046.11.1.8.2.1 | ScalarlenovoSupportCenter | read-only | mandatory | The country code for the Support Center. 2 character ISO country code. |
| 1.3.6.1.4.1.19046.11.1.8.3 | NodecontactInformation | |||
| 1.3.6.1.4.1.19046.11.1.8.3.1 | ScalarcompanyName | read-only | mandatory | The organization/company name of the contact person. 1-30 characters. |
| 1.3.6.1.4.1.19046.11.1.8.3.2 | ScalarcontactName | read-only | mandatory | The name of the contact person.1-30 characters. |
| 1.3.6.1.4.1.19046.11.1.8.3.3 | ScalarphoneNumber | read-only | mandatory | The phone of the contact person. 5-30 characters. |
| 1.3.6.1.4.1.19046.11.1.8.3.4 | ScalaremailAddress | read-only | mandatory | The email of the contact person. It must contain '@' and dot '.' in form userid@hostname (30 characters maximum). The userid can be alphanumeric characters, '.… |
| 1.3.6.1.4.1.19046.11.1.8.3.5 | Scalaraddress | read-only | mandatory | The address of the machine location. The information in this field should be of sufficient detail to allow someone to quickly find the chassis when necessary. … |
| 1.3.6.1.4.1.19046.11.1.8.3.6 | Scalarcity | read-only | mandatory | The city of the machine location. 1-30 characters. |
| 1.3.6.1.4.1.19046.11.1.8.3.7 | Scalarstate | read-only | mandatory | The state of the machine location. 2-3 characters. |
| 1.3.6.1.4.1.19046.11.1.8.3.8 | ScalarpostalCode | read-only | mandatory | The postal code of the location for this system. 1-9 characters, only alphanumeric characters are valid. |
| 1.3.6.1.4.1.19046.11.1.8.3.9 | ScalarphoneExtension | read-only | mandatory | The phone extension of the contact person. 30 characters maximum. |
| 1.3.6.1.4.1.19046.11.1.8.3.10 | ScalaraltContactName | read-only | mandatory | The name of the alternate contact person. 1-30 characters. |
| 1.3.6.1.4.1.19046.11.1.8.3.11 | ScalaraltPhoneNumber | read-only | mandatory | The phone of the alternate contact person. 5-30 characters. |
| 1.3.6.1.4.1.19046.11.1.8.3.12 | ScalaraltPhoneExtension | read-only | mandatory | The phone extension of the alternate contact person. 30 characters maximum. |
| 1.3.6.1.4.1.19046.11.1.8.3.13 | ScalaraltEmailAddress | read-only | mandatory | The email of the alternate contact person. It must contain '@' and dot '.' in form userid@hostname (30 characters maximum). The userid can be alphanumeric char… |
| 1.3.6.1.4.1.19046.11.1.8.3.14 | ScalarmachineLocationPhoneNumber | read-only | mandatory | The phone of the physical location where the compuer system resides. 5-30 characters. |
| 1.3.6.1.4.1.19046.11.1.8.4 | NodehttpProxyConfig | |||
| 1.3.6.1.4.1.19046.11.1.8.4.1 | ScalarhttpProxyEnable | read-only | mandatory | Disable/Enable of the HTTP Proxy. HTTP Proxy is used by the XCC when it is not connected to the internet directly. |
| 1.3.6.1.4.1.19046.11.1.8.4.2 | ScalarhttpProxyLocation | read-only | mandatory | Fully qualified host name or IP address of the HTTP Proxy. Maximum of 63 characters. |
| 1.3.6.1.4.1.19046.11.1.8.4.3 | ScalarhttpProxyPort | read-only | mandatory | The port number of the HTTP Proxy. An integer value from 1 to 65535. |
| 1.3.6.1.4.1.19046.11.1.8.4.4 | ScalarhttpProxyUserName | read-only | mandatory | User Name of the HTTP Proxy. A maximum of 30 characters string without spaces. |
| 1.3.6.1.4.1.19046.11.1.8.4.5 | ScalarhttpProxyPassword | read-only | mandatory | Password of the HTTP Proxy. A maximum of 15 characters string without spaces. |
| 1.3.6.1.4.1.19046.11.1.8.5 | NodeactivityLogs | |||
| 1.3.6.1.4.1.19046.11.1.8.5.1 | TableactivityLogTable | not-accessible | mandatory | Table of Service Advisor Activity Log entries information. This table displays events that were generated by the system or user that are called home. The entri… |
| 1.3.6.1.4.1.19046.11.1.8.5.1.1 | RowactivityLogEntry | not-accessible | mandatory | Activity Log table entry. Each entry has the result of the call-home attempt, the service number assigned for the issue by the Support Center, the event ID, ev… |
| 1.3.6.1.4.1.19046.11.1.8.5.1.1.1 | ColumnactivityLogIndex | read-only | mandatory | The Activity Log index number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.19046.11.1.8.5.1.1.2 | ColumnactivityLogString | read-only | mandatory | A string of data detailing one Activity Log entry. The text message is from the original entry in the event log. For consistent results, view as a table and no… |
| 1.3.6.1.4.1.19046.11.1.8.5.1.1.3 | ColumnactivityLogAcknowledge | read-only | mandatory | The acknowledgement of one Activity Log entry as corrected. This field allows the users to set a reminder next to certain events to indicate their awareness of… |
| 1.3.6.1.4.1.19046.11.1.8.5.1.1.4 | ColumnactivityLogAttribute | read-only | mandatory | A string of data detailing one Activity Log entry's attribute. It contains states of both calling the Support Center and FTP/TFTP Server. A PENDING indicates t… |
| 1.3.6.1.4.1.19046.11.1.8.6 | NodeautoFTPSetup | |||
| 1.3.6.1.4.1.19046.11.1.8.6.1 | ScalarautoFTPCallMode | read-only | mandatory | This field specifies the automated problem reporting mode. Automated problem reporting mode allows the XCC to automatically put service data to a specified ser… |
| 1.3.6.1.4.1.19046.11.1.8.6.2 | ScalarautoFTPCallAddr | read-only | mandatory | This field specifies the remote server address of FTP and TFTP. It should be fully qualified hostname or IP address. |
| 1.3.6.1.4.1.19046.11.1.8.6.3 | ScalarautoFTPCallPort | read-only | mandatory | This field specifies the port on remote FTP/TFTP server for data transmission. |
| 1.3.6.1.4.1.19046.11.1.8.6.4 | ScalarautoFTPCallUserID | read-only | mandatory | This field specifies the user account to login remote FTP server. |
| 1.3.6.1.4.1.19046.11.1.8.7 | NodecallHomeExclusionEvents | |||
| 1.3.6.1.4.1.19046.11.1.8.7.1 | TablereadCallHomeExclusionEventTable | not-accessible | mandatory | Table of Call Home Exclusion Event entries information. |
| 1.3.6.1.4.1.19046.11.1.8.7.1.1 | RowreadCallHomeExclusionEventEntry | not-accessible | mandatory | Call Home Exclusion Event table entry |
| 1.3.6.1.4.1.19046.11.1.8.7.1.1.1 | ColumnreadCallHomeExclusionEventIndex | read-only | mandatory | The index number of one Call Home Exclusion Event. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.19046.11.1.8.7.1.1.2 | ColumnreadCallHomeExclusionEventID | read-only | mandatory | The Event ID of one Call Home Exclusion Event entry. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.19046.11.1.158 | NodesupportProcessor |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EntryStatus | INTEGER { valid(1), createRequest(2), underCreation(3), invalid(4) } |