MIB Viewer

LIGO-802DOT11-EXT-MIB

45 objects
The LigoWave 802.11 Extension MIB.
Imported Objects
IF-MIBifIndex ifPhysAddress InterfaceIndex
LIGOWAVE-MIBligoMgmt
SNMPv2-MIBsysLocation
SNMPv2-SMICounter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TCMacAddress TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.32750.3.5Identityligo802dot11ExtMIBThe LigoWave 802.11 Extension MIB.
1.3.6.1.4.1.32750.3.5.1Nodeligo802dot11ExtMIBObjects
1.3.6.1.4.1.32750.3.5.1.0NodeligoDot11Notifs
1.3.6.1.4.1.32750.3.5.1.0.1NotificationligoFrequencyChangecurrentThis notification is sent on frequency change.
1.3.6.1.4.1.32750.3.5.1.0.2NotificationligoNoiseThresholdReachedcurrentThis notification is sent when noise becomes bigger than threshold.
1.3.6.1.4.1.32750.3.5.1.0.3NotificationligoRemoteNodeConnectedcurrentThis notification is sent when remote node associates.
1.3.6.1.4.1.32750.3.5.1.0.4NotificationligoRemoteNodeDisconnectedcurrentThis notification is sent when remote node dissasociates.
1.3.6.1.4.1.32750.3.5.1.0.5NotificationligoLinkQualThresholdReachedcurrentThis notification is sent when link quality crosses the specified threshold.
1.3.6.1.4.1.32750.3.5.1.1NodeligoDot11Info
1.3.6.1.4.1.32750.3.5.1.2NodeligoDot11Conf
1.3.6.1.4.1.32750.3.5.1.2.1TableligoDot11IfConfTablenot-accessiblecurrentWireless interface configuration table.
1.3.6.1.4.1.32750.3.5.1.2.1.1RowligoDot11IfConfEntrynot-accessiblecurrentWireless interface configuration table entry.
1.3.6.1.4.1.32750.3.5.1.2.1.1.1ColumnligoDot11IfParentIndexread-onlycurrentWireless interface's parent index, which corresponds to ifIndex in MIB-II interfaces table. This is only applicable if the interface is virtual and it is creat…
1.3.6.1.4.1.32750.3.5.1.2.1.1.2ColumnligoDot11IfProtocolread-onlycurrentProtocol string, for example 'IEEE 802.11g'.
1.3.6.1.4.1.32750.3.5.1.2.1.1.3ColumnligoDot11IfModeread-onlycurrentWireless interface operation mode
1.3.6.1.4.1.32750.3.5.1.2.1.1.4ColumnligoDot11IfESSIDread-onlycurrentESSID
1.3.6.1.4.1.32750.3.5.1.2.1.1.5ColumnligoDot11IfAccessPointread-onlycurrentAccess point's MAC address if working in managed mode and connected. Current interface's MAC address, when working in master mode.
1.3.6.1.4.1.32750.3.5.1.2.1.1.6ColumnligoDot11IfCountryCoderead-onlycurrentCountry code.
1.3.6.1.4.1.32750.3.5.1.2.1.1.7ColumnligoDot11IfFrequencyread-onlycurrentCurrent frequency as reported by driver.
1.3.6.1.4.1.32750.3.5.1.2.1.1.8ColumnligoDot11IfChannelread-onlycurrentChannel number.
1.3.6.1.4.1.32750.3.5.1.2.1.1.9ColumnligoDot11IfChannelBandwidthread-onlycurrentChannel bandwidth.
1.3.6.1.4.1.32750.3.5.1.2.1.1.10ColumnligoDot11IfTxPowerread-onlycurrentTransmit power in dBm.
1.3.6.1.4.1.32750.3.5.1.2.1.1.11ColumnligoDot11IfBitRateread-onlycurrentTransmission bitrate.
1.3.6.1.4.1.32750.3.5.1.2.1.1.12ColumnligoDot11IfLinkQualityread-onlycurrentLink quality value.
1.3.6.1.4.1.32750.3.5.1.2.1.1.13ColumnligoDot11IfMaxLinkQualityread-onlycurrentMaximum possible link quality value for current wireless card.
1.3.6.1.4.1.32750.3.5.1.2.1.1.14ColumnligoDot11IfSignalLevelread-onlycurrentSignal level.
1.3.6.1.4.1.32750.3.5.1.2.1.1.15ColumnligoDot11IfNoiseLevelread-onlycurrentNoise level.
1.3.6.1.4.1.32750.3.5.1.2.1.1.16ColumnligoDot11IfAssocNodeCountread-onlycurrentNumber of associated nodes when working in access point mode. 1 - if associated to remote access point in client mode.
1.3.6.1.4.1.32750.3.5.1.3NodeligoDot11Stats
1.3.6.1.4.1.32750.3.5.1.3.1TableligoDot11IfErrStatsTablenot-accessiblecurrentWireless interface statistics table.
1.3.6.1.4.1.32750.3.5.1.3.1.1RowligoDot11IfErrStatsEntrynot-accessiblecurrentWireless interface statistics table entry.
1.3.6.1.4.1.32750.3.5.1.3.1.1.1ColumnligoDot11IfRxInvalidNWIDread-onlycurrentNumber of received packets with invalid NWID/ESSID. Increasing value usually means that there are other stations transmitting on the same channel or adjacent c…
1.3.6.1.4.1.32750.3.5.1.3.1.1.2ColumnligoDot11IfRxInvalidCryptread-onlycurrentNumber of received packets the hardware was unable to decrypt.
1.3.6.1.4.1.32750.3.5.1.3.1.1.3ColumnligoDot11IfRxInvalidFragread-onlycurrentNumber of received packets that were missing link layer fragments for complete re-assembly.
1.3.6.1.4.1.32750.3.5.1.3.1.1.4ColumnligoDot11IfTxExcessiveRetriesread-onlycurrentNumber of packets hardware failed to deliver.
1.3.6.1.4.1.32750.3.5.1.3.1.1.5ColumnligoDot11IfInvalidMiscread-onlycurrentOther packets lost in relation with specific wireless operations.
1.3.6.1.4.1.32750.3.5.1.3.1.1.6ColumnligoDot11IfMissedBeaconsread-onlycurrentNumber of beacons that should have been sent by remote access point but were not received. Increasing number usually means that communicating peers moved out o…
1.3.6.1.4.1.32750.3.5.1.3.2TableligoDot11RemoteNodeStatsTablenot-accessiblecurrentRemote node statistics table. This table shows statistics for associated or already disconnected clients on wireless interfaces which are operating in access p…
1.3.6.1.4.1.32750.3.5.1.3.2.1RowligoDot11RemoteNodeStatsEntrynot-accessiblecurrentWireless remote node statistics table entry.
1.3.6.1.4.1.32750.3.5.1.3.2.1.1ColumnligoDot11RmtNodeMacAddressread-onlycurrentRemote node MAC address.
1.3.6.1.4.1.32750.3.5.1.3.2.1.2ColumnligoDot11RmtNodeAssociatedread-onlycurrentRemote node is currently associated.
1.3.6.1.4.1.32750.3.5.1.3.2.1.3ColumnligoDot11RmtNodeTxBytesread-onlycurrentBytes transmitted to remote node. This object is optional.
1.3.6.1.4.1.32750.3.5.1.3.2.1.4ColumnligoDot11RmtNodeRxBytesread-onlycurrentBytes received from remote node. This object is optional.
1.3.6.1.4.1.32750.3.5.1.3.2.1.5ColumnligoDot11RmtNodeAssocTimeread-onlycurrentUNIX timestamp of the association. This object is optional.
1.3.6.1.4.1.32750.3.5.1.3.2.1.6ColumnligoDot11RmtNodeDisassocTimeread-onlycurrentUNIX timestamp of the disassociation (if remote node recently dissasociated). This object is optional.