LINK-BUNDLING-MIB
79 objects
This MIB contains managed object definitions for MPLS traffic engineering link bundling as defined in: Kompella, K., Rekhter, Y., Berger, L., Link Bundling in MPLS Traffic Engineering Internet Draft <draft-ietf-mpls-bundling-04.txt>, July 2002.
Imported Objects
| IF-MIB | ifIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| OSPF-MIB | RouterID |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1 | IdentitylinkBundlingMIB | This MIB contains managed object definitions for MPLS traffic engineering link bundling as defined in: Kompella, K., Rekhter, Y., Berger, L., Link Bundling in … | ||
| 1.3.6.1.2.1.0 | NodelinkBundlingNotifications | |||
| 1.3.6.1.2.1.0.1 | NotificationlinkBundleMismatch | current | This notification is generated when a mismatch is found on a bundled link. Such mismatch can be detected for instance if one of the traffic engineering paramet… | |
| 1.3.6.1.2.1.1 | NodelinkBundlingObjects | |||
| 1.3.6.1.2.1.1.1 | TableteLinkTable | not-accessible | current | This table specifies the grouping of component links into TE links and grouping of TE links into bundled links. |
| 1.3.6.1.2.1.1.1.1 | RowteLinkEntry | not-accessible | current | An entry in this table exists for each ifEntry with an ifType of teLink(TBD), i.e. for every TE link. An ifEntry in the ifTable must exist before a teLinkEntry… |
| 1.3.6.1.2.1.1.1.1.1 | ColumnteLinkIpAddrType | read-create | current | For IPv4 and IPv6 numbered links, this object represents the IP address type associated with the TE link. For unnumbered links, a value of unknown(0) must be u… |
| 1.3.6.1.2.1.1.1.1.2 | ColumnteLinkIpAddr | read-create | current | For IPv4 and IPv6 numbered links, this object represents the IP address associated with the TE link. |
| 1.3.6.1.2.1.1.1.1.3 | ColumnteLinkRemoteIpAddr | read-create | current | The remote IP address associated with the TE link (IPv4 and IPv6 numbered links). |
| 1.3.6.1.2.1.1.1.1.4 | ColumnteLinkMetric | read-create | current | The traffic engineering metric for the TE link is derived from its component links. All component links within the TE link must have the same traffic engineeri… |
| 1.3.6.1.2.1.1.1.1.5 | ColumnteLinkMuxCapability | read-create | current | This attribute specifies link multiplex capability of the TE link, which is derived from its component links. All component links within the same TE link must … |
| 1.3.6.1.2.1.1.1.1.6 | ColumnteLinkProtectionType | read-create | current | This attribute specifies link protection type of the TE link. |
| 1.3.6.1.2.1.1.1.1.7 | ColumnteLinkWorkingPriority | read-create | current | This object represents a priority value such that a new connection with a higher priority, i.e. numerically lower than this value, is guaranteed to be setup on… |
| 1.3.6.1.2.1.1.1.1.8 | ColumnteLinkResourceClass | read-create | current | This attribute specifies the TE link resource class. The resource class is a 32 bit bitfield. The resource class for a link bundle is derived from the resource… |
| 1.3.6.1.2.1.1.1.1.9 | ColumnteLinkIncomingIfId | read-create | current | For unnumbered links, the incoming interface is set to the outgoing interface identifier chosen by the neighboring LSR for the reverse link corresponding to th… |
| 1.3.6.1.2.1.1.1.1.10 | ColumnteLinkOutgoingIfId | read-create | current | If the link is unnumbered, the outgoing interface identifier is set to the outgoing interface identifier chosen for the TE link by the advertising LSR. |
| 1.3.6.1.2.1.1.1.1.11 | ColumnteLinkFlooding | read-create | current | This object only has significance for link bundles which encoding type is not clear. For these link bundles, this object identifies the TE link on which to res… |
| 1.3.6.1.2.1.1.1.1.12 | ColumnteLinkRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. All read-create objects can only be changed when teLinkRowStatus is active. |
| 1.3.6.1.2.1.1.1.1.13 | ColumnteLinkStorageType | read-create | current | The storage type for this conceptual row in the teLinkTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar object in… |
| 1.3.6.1.2.1.1.2 | TableteLinkDescriptorTable | not-accessible | current | This table specifies the link descriptors associated with the TE links. |
| 1.3.6.1.2.1.1.2.1 | RowteLinkDescriptorEntry | not-accessible | current | An entry in this table is created for every TE link descriptor. An ifEntry in the ifTable must exist before a teLinkDescriptorEntry using the same ifIndex is c… |
| 1.3.6.1.2.1.1.2.1.1 | ColumnteLinkDescriptorId | not-accessible | current | This object specifies the link descriptor identifier. |
| 1.3.6.1.2.1.1.2.1.2 | ColumnteLinkEncodingType | read-create | current | This attribute specifies the TE link encoding type. |
| 1.3.6.1.2.1.1.2.1.3 | ColumnteLinkDescrPriority | read-create | current | This object specifies the lowest priority at which that link encoding type is available. |
| 1.3.6.1.2.1.1.2.1.4 | ColumnteLinkMinReservableBandwidth | read-create | current | This attribute specifies the minimum reservable bandwidth on the TE link. This is derived from the union of the minimum reservable bandwidth of all the compone… |
| 1.3.6.1.2.1.1.2.1.5 | ColumnteLinkMaxReservableBandwidth | read-create | current | This attribute specifies the maximum reservable bandwidth on the TE link. This is the union of the maximum reservable bandwidth of all the component links with… |
| 1.3.6.1.2.1.1.2.1.6 | ColumnteLinkDescrRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. All read-create objects can only be changed when teLinkDescrRowStatus is active. |
| 1.3.6.1.2.1.1.2.1.7 | ColumnteLinkDescrStorageType | read-create | current | The storage type for this conceptual row in the teLinkDescriptorTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar… |
| 1.3.6.1.2.1.1.3 | TableteLinkOspfTeTable | not-accessible | current | This table specifies the OSPF traffic engineering information associated with TE links. |
| 1.3.6.1.2.1.1.3.1 | RowteLinkOspfTeEntry | not-accessible | current | If OSPF is enabled, an entry in this table is created for every TE link. |
| 1.3.6.1.2.1.1.3.1.1 | ColumnteLinkOspfLinkType | read-create | current | This attribute specifies the OSPF link type for the TE link. All TE links within the same bundle must have the same link type. |
| 1.3.6.1.2.1.1.3.1.2 | ColumnteLinkOspfLinkId | read-create | current | On point-to-point link, the link identifier is the Router ID of the neighbor. For bundled link, is derived from the link identifier associated with its TE link… |
| 1.3.6.1.2.1.1.4 | TableteLinkSrlgTable | not-accessible | current | This table specifies the SRLGs associated with TE links. |
| 1.3.6.1.2.1.1.4.1 | RowteLinkSrlgEntry | not-accessible | current | An entry in this table contains information about a SRLG associated with a TE link. An ifEntry in the ifTable must exist before a teLinkSrlgEntry using the sam… |
| 1.3.6.1.2.1.1.4.1.1 | Columnsrlg | not-accessible | current | This identifies a SRLG supported by the TE link. |
| 1.3.6.1.2.1.1.4.1.2 | ColumnsrlgRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. All read-create objects can only be changed when srlgRowStatus is active. |
| 1.3.6.1.2.1.1.4.1.3 | ColumnsrlgStorageType | read-create | current | The storage type for this conceptual row in the teLinkSrlgTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objec… |
| 1.3.6.1.2.1.1.5 | TableteLinkBandwidthTable | not-accessible | current | This table specifies the priority-based bandwidth table for TE links. |
| 1.3.6.1.2.1.1.5.1 | RowteLinkBandwidthEntry | not-accessible | current | An entry in this table contains information about the priority-based bandwidth of TE links. An ifEntry in the ifTable must exist before a teLinkBandwidthEntry … |
| 1.3.6.1.2.1.1.5.1.1 | ColumnteLinkPriority | not-accessible | current | This attribute specifies the priority. It should be mapped to a number between 0 and 7 |
| 1.3.6.1.2.1.1.5.1.2 | ColumnteLinkUnreservedBandwidth | read-only | current | This attribute specifies the TE link unreserved bandwidth at priority p. It is the sum of the unreserved bandwidths at priority p of all component links associ… |
| 1.3.6.1.2.1.1.5.1.3 | ColumnteLinkMaximumLspBandwidth | read-create | current | This attribute specifies the TE link maximum LSP bandwidth at priority p. It is the maximum of all maximum LSP bandwidth at priority p of the component links a… |
| 1.3.6.1.2.1.1.5.1.4 | ColumnteLinkBandwidthRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. All read-create objects can only be changed when teLinkBandwidthRowStatus is active. |
| 1.3.6.1.2.1.1.5.1.5 | ColumnteLinkBandwidthStorageType | read-create | current | The storage type for this conceptual row in the teLinkBandwidthTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar … |
| 1.3.6.1.2.1.1.6 | TablecomponentLinkTable | not-accessible | current | This table specifies the component link parameters. |
| 1.3.6.1.2.1.1.6.1 | RowcomponentLinkEntry | not-accessible | current | An entry in this table exists for each ifEntry that represents a component link. An ifEntry must exist in the ifTable before a componentLinkEntry is created wi… |
| 1.3.6.1.2.1.1.6.1.1 | ColumncomponentLinkMuxCapability | read-create | current | This attribute specifies link multiplexing capabilities of the component link. |
| 1.3.6.1.2.1.1.6.1.2 | ColumncomponentLinkPreferredProtection | read-create | current | This attribute specifies whether this component link is a primary or secondary entity. |
| 1.3.6.1.2.1.1.6.1.3 | ColumncomponentLinkCurrentProtection | read-only | current | This attribute specifies whether this component link is currently used as primary or secondary link. |
| 1.3.6.1.2.1.1.6.1.4 | ColumncomponentLinkRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. All read-create objects can only be changed when componentLinkRowStatus is active. |
| 1.3.6.1.2.1.1.6.1.5 | ColumncomponentLinkStorageType | read-create | current | The storage type for this conceptual row in the componentLinkTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar ob… |
| 1.3.6.1.2.1.1.7 | TablecomponentLinkDescriptorTable | not-accessible | current | This table specifies the link descriptors associated with the component links. |
| 1.3.6.1.2.1.1.7.1 | RowcomponentLinkDescriptorEntry | not-accessible | current | An entry in this table is created for every component link descriptor. An ifEntry in the ifTable must exist before a componentLinkDescriptorEntry using the sam… |
| 1.3.6.1.2.1.1.7.1.1 | ColumncomponentLinkDescrId | not-accessible | current | This object specifies the link descriptor identifier. |
| 1.3.6.1.2.1.1.7.1.2 | ColumncomponentLinkEncodingType | read-create | current | This attribute specifies the component link encoding type. |
| 1.3.6.1.2.1.1.7.1.3 | ColumncomponentLinkDescrPriority | read-create | current | This object specifies the lowest priority at which that link encoding type is available for the component link. |
| 1.3.6.1.2.1.1.7.1.4 | ColumncomponentLinkMinReservBandwidth | read-create | current | This attribute specifies the minimum reservable bandwidth on the component link. This value is an estimate in units of 1,000 bits per second. |
| 1.3.6.1.2.1.1.7.1.5 | ColumncomponentLinkMaxReservBandwidth | read-create | current | This attribute specifies the maximum reservable bandwidth on the component link. This value is an estimate in units of 1,000 bits per second. |
| 1.3.6.1.2.1.1.7.1.6 | ColumncomponentLinkDescrRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. All read-create objects can only be changed when componentLinkDescrRowStatus is act… |
| 1.3.6.1.2.1.1.7.1.7 | ColumncomponentLinkDescrStorageType | read-create | current | The storage type for this conceptual row in the componentLinkDescriptorTable. Conceptual rows having the value 'permanent' need not allow write-access to any c… |
| 1.3.6.1.2.1.1.8 | TablecomponentLinkBandwidthTable | not-accessible | current | This table specifies the priority-based bandwidth for component links. |
| 1.3.6.1.2.1.1.8.1 | RowcomponentLinkBandwidthEntry | not-accessible | current | An entry in this table contains information about the priority-based bandwidth on component links. An ifEntry in the ifTable must exist before a componentLinkB… |
| 1.3.6.1.2.1.1.8.1.1 | ColumncomponentLinkPriority | not-accessible | current | This attribute specifies the priority. It should be mapped to a number between 0 and 7. |
| 1.3.6.1.2.1.1.8.1.2 | ColumncomponentLinkUnreservedBandwidth | read-only | current | This attribute specifies the component link unreserved bandwidth at priority p. This value is an estimate in units of 1,000 bits per second. |
| 1.3.6.1.2.1.1.8.1.3 | ColumncomponentLinkMaximumLspBandwidth | read-create | current | This attribute specifies the component link maximum LSP bandwidth at priority p. This value is an estimate in units of 1,000 bits per second. |
| 1.3.6.1.2.1.1.8.1.4 | ColumncomponentLinkBandwidthRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. All read-create objects can only be changed when componentLinkBandwidthRowStatus is… |
| 1.3.6.1.2.1.1.8.1.5 | ColumncomponentLinkBwStorageType | read-create | current | The storage type for this conceptual row in the componentLinkBandwidthTable. Conceptual rows having the value 'permanent' need not allow write-access to any co… |
| 1.3.6.1.2.1.1.9 | ScalarlinkBundlingNotifEnable | read-write | current | If this object is true, then it enables the generation of the link bundling notifications, otherwise these notifications are not emitted. |
| 1.3.6.1.2.1.2 | NodelinkBundlingConformance | |||
| 1.3.6.1.2.1.2.1 | NodelinkBundlingGroups | |||
| 1.3.6.1.2.1.2.1.1 | GrouplinkBundlingGroup | current | Collection of objects needed for the monitoring of resources associated with TE links. | |
| 1.3.6.1.2.1.2.1.2 | GroupteLinkOspfTeGroup | current | Collection of objects needed for the OSPF traffic engineering parameters of TE links. | |
| 1.3.6.1.2.1.2.1.3 | GroupteLinkSrlgGroup | current | Collection of objects needed for the monitoring of SRLG resources associated with TE links. | |
| 1.3.6.1.2.1.2.1.4 | GroupteLinkBandwidthGroup | current | Collection of objects needed for the monitoring of the priority-based bandwidth resources associated with TE links and component links. | |
| 1.3.6.1.2.1.2.1.5 | GroupcomponentLinkBandwidthGroup | current | Collection of objects needed for the monitoring of bandwidth parameters associated with component links. | |
| 1.3.6.1.2.1.2.1.6 | GrouplinkBundlingNotificationGroup | current | Set of notifications implemented in this module. None is mandatory. | |
| 1.3.6.1.2.1.2.2 | NodelinkBundlingCompliances | |||
| 1.3.6.1.2.1.2.2.1 | CompliancelinkBundlingFullModuleCompliance | read-only | current | Compliance statement for agents that support the configuration and monitoring of link bundling MIB. |
| 1.3.6.1.2.1.2.2.2 | CompliancelinkBundlingMonModuleCompliance | read-only | current | Compliance statement for agents that support the monitoring of link bundling MIB. |