LINKB-OPT-FDDI-MIB-1-1-2
68 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43 | Nodea3Com | |||
| 1.3.6.1.4.1.43.7 | Nodelb3gh | |||
| 1.3.6.1.4.1.43.7.2 | Nodelb3ghOptFddi | |||
| 1.3.6.1.4.1.43.7.2.1 | NodelbOptSMT | |||
| 1.3.6.1.4.1.43.7.2.1 | NodelbOptSMTHoldCondition | Generated when fddiSMTHoldState (fddimibSMTHoldState) assumes the state holding-prm or holding-sec. This notification is a Condition in the Status Report Proto… | ||
| 1.3.6.1.4.1.43.7.2.1.1 | TablelbOptSMTTable | not-accessible | mandatory | A list of optional SMT entries. The number of entries shall not exceed the value of snmpFddiSMTNumber. |
| 1.3.6.1.4.1.43.7.2.1.1.1 | RowlbOptSMTEntry | not-accessible | mandatory | An optional SMT entry containing information common to a given optional SMT. |
| 1.3.6.1.4.1.43.7.2.1.1.1.1 | ColumnlbOptSMTIndex | read-only | mandatory | A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-in… |
| 1.3.6.1.4.1.43.7.2.1.1.1.2 | ColumnlbOptSMTManufacturerOUI | read-only | mandatory | The three octets of manufacturer data which make up the manufacturerOUI component. |
| 1.3.6.1.4.1.43.7.2.1.1.1.3 | ColumnlbOptSMTManufacturerData | read-only | mandatory | The 29 octets of manufacturer data which make up the manufacturerData component. |
| 1.3.6.1.4.1.43.7.2.1.1.1.4 | ColumnlbOptSMTHoldState | read-only | mandatory | This variable indicates the current state of the Hold function. The value 'not-holding' is the default and initial value. The value must be set to 'not-holding… |
| 1.3.6.1.4.1.43.7.2.1.1.1.5 | ColumnlbOptSMTSetCount | read-only | mandatory | This variable is composed of a count incremented in response to a Set operation on the MIB, and the time of the change, however only the count is reported here… |
| 1.3.6.1.4.1.43.7.2.1.1.1.6 | ColumnlbOptSMTLastSetStationId | read-only | mandatory | The Station ID of the station that effected the last change in the FDDI MIB. |
| 1.3.6.1.4.1.43.7.2.2 | NodelbOptMAC | |||
| 1.3.6.1.4.1.43.7.2.2 | NodelbOptSMTPeerWrapCondition | This condition is active when fddiSMTPeerWrapFlag (fddimibSMTPeerWrapFlag) is set. This notification is a Condition in the Status Report Protocol (see 7.2.7 an… | ||
| 1.3.6.1.4.1.43.7.2.2.1 | TablelbOptMACBridgeFunctionTable | not-accessible | mandatory | A list of MAC bridge function entries. |
| 1.3.6.1.4.1.43.7.2.2.1.1 | RowlbOptMACBridgeFunctionEntry | not-accessible | mandatory | Bridge function information for a given MAC within a given SMT. |
| 1.3.6.1.4.1.43.7.2.2.1.1.1 | ColumnlbOptMACBridgeFunctionSMTIndex | read-only | mandatory | A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-in… |
| 1.3.6.1.4.1.43.7.2.2.1.1.2 | ColumnlbOptMACBridgeFunctionMACIndex | read-only | mandatory | Index variable for uniquely identifying the MAC object instances. |
| 1.3.6.1.4.1.43.7.2.2.1.1.3 | ColumnlbOptMACBridgeFunctions | read-only | mandatory | Indicates the MAC's optional bridging functions. The Value -1 is used to indicate that bridging is not supported by this MAC. The value is a sum. This value in… |
| 1.3.6.1.4.1.43.7.2.2.2 | TablelbOptMACTPriTable | not-accessible | mandatory | A list of MAC T-Pri entries. |
| 1.3.6.1.4.1.43.7.2.2.2.1 | RowlbOptMACTPriEntry | not-accessible | mandatory | A collection of T-Pri information for a given MAC within a given SMT. |
| 1.3.6.1.4.1.43.7.2.2.2.1.1 | ColumnlbOptMACTPriSMTIndex | read-only | mandatory | A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-in… |
| 1.3.6.1.4.1.43.7.2.2.2.1.2 | ColumnlbOptMACTPriMACIndex | read-only | mandatory | Index variable for uniquely identifying the MAC object instances. |
| 1.3.6.1.4.1.43.7.2.2.2.1.3 | ColumnlbOptMACTPri0 | read-only | mandatory | This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units. |
| 1.3.6.1.4.1.43.7.2.2.2.1.4 | ColumnlbOptMACTPri1 | read-only | mandatory | This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units. |
| 1.3.6.1.4.1.43.7.2.2.2.1.5 | ColumnlbOptMACTPri2 | read-only | mandatory | This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units. |
| 1.3.6.1.4.1.43.7.2.2.2.1.6 | ColumnlbOptMACTPri3 | read-only | mandatory | This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units. |
| 1.3.6.1.4.1.43.7.2.2.2.1.7 | ColumnlbOptMACTPri4 | read-only | mandatory | This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units. |
| 1.3.6.1.4.1.43.7.2.2.2.1.8 | ColumnlbOptMACTPri5 | read-only | mandatory | This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units. |
| 1.3.6.1.4.1.43.7.2.2.2.1.9 | ColumnlbOptMACTPri6 | read-only | mandatory | This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units. |
| 1.3.6.1.4.1.43.7.2.3 | NodelbOptMACDuplicateAddressCondition | This condition is active when either fddiMACDA-Flag (fddimibMACDaFlag) or fddiMACUNDA-Flag (fddimibMACUnaDaFlag) is set. This event is handled as a Condition i… | ||
| 1.3.6.1.4.1.43.7.2.3 | NodelbOptPATH | |||
| 1.3.6.1.4.1.43.7.2.3.1 | TablelbOptPATHRingTable | not-accessible | mandatory | A list of PATH ring entries. |
| 1.3.6.1.4.1.43.7.2.3.1.1 | RowlbOptPATHRingEntry | not-accessible | mandatory | Ring latency, trace status, and T-Rmode information for a given PATH within a given SMT. |
| 1.3.6.1.4.1.43.7.2.3.1.1.1 | ColumnlbOptPATHRingSMTIndex | read-only | mandatory | A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-in… |
| 1.3.6.1.4.1.43.7.2.3.1.1.2 | ColumnlbOptPATHRingPATHIndex | read-only | mandatory | Index variable for uniquely identifying the primary, secondary and local PATH object instances. Local PATH object instances are represented with integer values… |
| 1.3.6.1.4.1.43.7.2.3.1.1.3 | ColumnlbOptPATHRingLatency | read-write | mandatory | Gives the total accumulated latency of the ring associated with this path. May be measured directly by the station or calculated by a management station. Value… |
| 1.3.6.1.4.1.43.7.2.3.1.1.4 | ColumnlbOptPATHTraceStatus | read-only | mandatory | This attribute indicates the current trace status of the path. The value is a sum which represents all of the trace status information which applies. This valu… |
| 1.3.6.1.4.1.43.7.2.3.1.1.5 | ColumnlbOptPATHT-Rmode | read-write | mandatory | Used by RMT to limit the duration of restricted dialogs on a path. This object is reported in 1 ns units. |
| 1.3.6.1.4.1.43.7.2.3.2 | TablelbOptPATHSbaTable | not-accessible | mandatory | A list of PATH Sba entries. |
| 1.3.6.1.4.1.43.7.2.3.2.1 | RowlbOptPATHSbaEntry | not-accessible | mandatory | Sba information for a given PATH within a given SMT. |
| 1.3.6.1.4.1.43.7.2.3.2.1.1 | ColumnlbOptPATHSbaSMTIndex | read-only | mandatory | A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-in… |
| 1.3.6.1.4.1.43.7.2.3.2.1.2 | ColumnlbOptPATHSbaPATHIndex | read-only | mandatory | Index variable for uniquely identifying the primary, secondary and local PATH object instances. Local PATH object instances are represented with integer values… |
| 1.3.6.1.4.1.43.7.2.3.2.1.3 | ColumnlbOptPATHSbaPayload | read-write | mandatory | The payload portion of the Synchronous Bandwidth Allocation for thi path. This value represents the maximum number of bytes of data allocated for transmission … |
| 1.3.6.1.4.1.43.7.2.3.2.1.4 | ColumnlbOptPATHSbaOverhead | read-write | mandatory | The overhead portion of the Synchronous Bandwith Allocation for this path. This value repersents the maximum number of bytes overhead (token capture, frame hea… |
| 1.3.6.1.4.1.43.7.2.3.2.1.5 | ColumnlbOptPATHSbaAvailable | read-write | mandatory | This value is the maximum Synchronous Bandwith available for a path in bytes per second. |
| 1.3.6.1.4.1.43.7.2.4 | NodelbOptMACFrameErrorCondition | Generated when the fddiMACFrameErrorRatio (fddimibMACFrameErrorRatio) is greater than or equal to fddiMACFrameErrorThreshold (fddimibMACFrameErrorThreshold). T… | ||
| 1.3.6.1.4.1.43.7.2.4 | NodelbOptPORT | |||
| 1.3.6.1.4.1.43.7.2.4.1 | TablelbOptPORTTable | not-accessible | mandatory | A list of optional PORT entries. |
| 1.3.6.1.4.1.43.7.2.4.1.1 | RowlbOptPORTEntry | not-accessible | mandatory | MAC loop time and EB error count information for a given PORT within a given SMT. |
| 1.3.6.1.4.1.43.7.2.4.1.1.1 | ColumnlbOptPORTSMTIndex | read-only | mandatory | A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-in… |
| 1.3.6.1.4.1.43.7.2.4.1.1.2 | ColumnlbOptPORTIndex | read-only | mandatory | Index variable for uniquely identifying the PORT object instances. |
| 1.3.6.1.4.1.43.7.2.4.1.1.3 | ColumnlbOptPORTMACLoopTime | read-write | mandatory | This attribute controls the value used for T_Next(9) (see 9.4.4.2.3). This object is reported in 1 ns units. |
| 1.3.6.1.4.1.43.7.2.4.1.1.4 | ColumnlbOptPORTEBErrorCt | read-only | mandatory | A count that should as closely as possible match the times an Elasticity Buffer Error has occurred while in active line state. |
| 1.3.6.1.4.1.43.7.2.4.2 | TablelbOptPORTLSTable | not-accessible | mandatory | A list of optional PORT line state entries. |
| 1.3.6.1.4.1.43.7.2.4.2.1 | RowlbOptPORTLSEntry | not-accessible | mandatory | Maintenance line state and PC line state information for a given PORT within a given SMT. |
| 1.3.6.1.4.1.43.7.2.4.2.1.1 | ColumnlbOptPORTLSSMTIndex | read-only | mandatory | A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-in… |
| 1.3.6.1.4.1.43.7.2.4.2.1.2 | ColumnlbOptPORTLSPORTIndex | read-only | mandatory | Index variable for uniquely identifying the PORT object instances. |
| 1.3.6.1.4.1.43.7.2.4.2.1.3 | ColumnlbOptPORTMaintLS | read-write | mandatory | The PORT Maintenance Line State specifies the line state (Maint_LS) to be transmitted when the PCM state machine for the port is in state PC9 Maint. |
| 1.3.6.1.4.1.43.7.2.4.2.1.4 | ColumnlbOptPORTPCLS | read-only | mandatory | This attribute indicates the line state (PC_LS) received by the port. |
| 1.3.6.1.4.1.43.7.2.5 | NodelbOptMACNotCopiedCondition | Generated when the fddiMACNotCopiedRatio (fddimibMACNotCopiedRatio) is greater than or equal to the fddiMACNotCopiedThreshold (lbOptMACNotCopiedThreshold). Thi… | ||
| 1.3.6.1.4.1.43.7.2.6 | NodelbOptMACNeighborChangeEvent | Generated when a change in a MAC's upstream neighbor address or downstream neighbor address is detected. (see 7.2.7 and 8.3). | ||
| 1.3.6.1.4.1.43.7.2.7 | NodelbOptMACPathChangeEvent | This event is generated when the value of the fddiMACCurrentPath (fddimibMACCurrentPath) changes. This event shall be supressed if the value changes from isola… | ||
| 1.3.6.1.4.1.43.7.2.8 | NodelbOptPORTLerCondition | This condition becomes active when the value of fddiPORTLer-Estimate (fddimibPORTLerEstimate) is less than or equal to fddiPORTLer-Alarm (fddimibPORTLerAlarm).… | ||
| 1.3.6.1.4.1.43.7.2.9 | NodelbOptPORTUndesiredConnAttemptEvent | Generated when an undesired connection attempt has been made (see 5.2.4, 7.2.7, and 8.3). | ||
| 1.3.6.1.4.1.43.7.2.10 | NodelbOptPORTEBErrorCondition | Generated when the Elasticity Buffer Error-Ct (lbOptPORTEBErrorCt) increments. This is handled as a condition in the Status Report Protocol. It is generated wh… | ||
| 1.3.6.1.4.1.43.7.2.11 | NodelbOptPORTPathChangeEvent | This event is generated when the value of the fddiPORTCurrentPath (lbOptPORTCurrentPath) changes. This event shall be surpressed if the value changes from isol… |