LIVINGSTON-PM-GLOBAL-MIB
37 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.307.1.2.1 | NodelucentPMGlobal | |||
| 1.3.6.1.4.1.307.1.2.1.1 | NodelucentPMGenGlobParams | |||
| 1.3.6.1.4.1.307.1.2.1.1.1 | ScalarlucentPMGenPriNameSrvr | read-write | mandatory | The primary name server address. The name server allows the machines to be accessed using names instead of the IP addresses. |
| 1.3.6.1.4.1.307.1.2.1.1.3 | ScalarlucentPMGenAltNameSrvr | read-write | mandatory | The alternate name server address. The alternate name server takes the responsibilities of the primary name server when the primary name server stops respondin… |
| 1.3.6.1.4.1.307.1.2.1.1.4 | ScalarlucentPMGenSyslogHost | read-write | mandatory | The host IP address where the syslog messages are sent. |
| 1.3.6.1.4.1.307.1.2.1.1.5 | ScalarlucentPMGenAssignedAddr | read-write | mandatory | The starting address for a pool of consecutive temporary addresses to be allocated by the PortMaster. This setting enables network login users to use IP addres… |
| 1.3.6.1.4.1.307.1.2.1.1.6 | ScalarlucentPMGenReportedAddr | read-write | mandatory | The IP address different from ether0 interface address which is reported to the outside world during PPP or SLIP protocol negotiation. Use this feature, if you… |
| 1.3.6.1.4.1.307.1.2.1.1.7 | ScalarlucentPMGenNetMask | read-write | mandatory | The user netmask allows the PortMaster to add routes to dial-in users based on the netmask specified in the netmask object. This seting affects the routing and… |
| 1.3.6.1.4.1.307.1.2.1.1.8 | ScalarlucentPMGenNameSvc | read-write | mandatory | Name service specifies the type of name resolution service used. The possible values are domain name service dns(2) or network information service nis(3). If e… |
| 1.3.6.1.4.1.307.1.2.1.1.9 | ScalarlucentPMGenDomainName | read-write | mandatory | Domain name of the system. Example xxxxxxx.com, yyyyyyyy.org, zzzzzzzz.edu or ppppppppp.net etc. |
| 1.3.6.1.4.1.307.1.2.1.1.10 | ScalarlucentPMGenTelnetPortNum | read-write | mandatory | Telnet port number. |
| 1.3.6.1.4.1.307.1.2.1.1.11 | ScalarlucentPMGenMaxConsConn | read-write | mandatory | Maximum number of console connections. |
| 1.3.6.1.4.1.307.1.2.1.1.12 | ScalarlucentPMGenOSPF | read-write | mandatory | Enable or disable Open Shortest Path First routing algorithm. |
| 1.3.6.1.4.1.307.1.2.1.1.13 | ScalarlucentPMGenBGP | read-write | mandatory | Enable or disable Border Gateway Protocol. |
| 1.3.6.1.4.1.307.1.2.1.1.14 | ScalarlucentPMGenIPX | read-write | mandatory | Enable or disable IPX Protocol. |
| 1.3.6.1.4.1.307.1.2.1.1.15 | ScalarlucentPMGenNetBIOS | read-write | mandatory | Enable or disable NetBIOS Protocol. |
| 1.3.6.1.4.1.307.1.2.1.1.16 | ScalarlucentPMGenCallCheck | read-write | mandatory | Enable or disable RADIUS authentication before an ISDN PRI call is accepted. You must configure the RADIUS user entries for this option to work. |
| 1.3.6.1.4.1.307.1.2.1.2 | NodelucentPMRadiusMgmt | |||
| 1.3.6.1.4.1.307.1.2.1.2.1 | ScalarlucentPMRadiusPriIP | read-write | mandatory | The IP address of the primary RADIUS server. |
| 1.3.6.1.4.1.307.1.2.1.2.2 | ScalarlucentPMRadiusAltIP | read-write | mandatory | The alternate IP address of the RADIUS server. |
| 1.3.6.1.4.1.307.1.2.1.2.3 | ScalarlucentPMRadiusPriAcctIP | read-write | mandatory | The IP address of the primary RADIUS accounting server. |
| 1.3.6.1.4.1.307.1.2.1.2.4 | ScalarlucentPMRadiusAltAcctIP | read-write | mandatory | The IP address of the RADIUS alternate accounting server. |
| 1.3.6.1.4.1.307.1.2.1.2.5 | ScalarlucentPMRadiusPriPort | read-write | mandatory | The port number for the primary RADIUS server. |
| 1.3.6.1.4.1.307.1.2.1.2.6 | ScalarlucentPMRadiusAltPort | read-write | mandatory | The port number for the alternate RADIUS server. |
| 1.3.6.1.4.1.307.1.2.1.2.7 | ScalarlucentPMRadiusPriAcctPort | read-write | mandatory | The port number for the primary RADIUS accounting server. |
| 1.3.6.1.4.1.307.1.2.1.2.8 | ScalarlucentPMRadiusAltAcctPort | read-write | mandatory | The port number for the alternate RADIUS accounting server. |
| 1.3.6.1.4.1.307.1.2.1.2.9 | ScalarlucentPMRadiusAuthFails | read-only | mandatory | The number of radius authentication failures. |
| 1.3.6.1.4.1.307.1.2.1.2.10 | ScalarlucentPMRadiusRetrans | read-write | mandatory | The maximum number of times a timeout will occur when communicating with radius. |
| 1.3.6.1.4.1.307.1.2.1.2.11 | ScalarlucentPMRadiusTimeout | read-write | mandatory | The maximum amount of time in seconds we will wait for a RADIUS response before retransmitting. |
| 1.3.6.1.4.1.307.1.2.1.2.12 | ScalarlucentPMRadiusAuth | read-write | mandatory | Is radius authentication on or off. |
| 1.3.6.1.4.1.307.1.2.1.2.13 | ScalarlucentPMRadiusSecret | write-only | mandatory | The shared secret between the RADIUS server and client. |
| 1.3.6.1.4.1.307.1.2.1.3 | NodelucentPMChoiceNetMgmt | |||
| 1.3.6.1.4.1.307.1.2.1.3.1 | ScalarlucentPMChoiceNetPriIP | read-write | mandatory | The IP address of the primary ChoiceNet server. |
| 1.3.6.1.4.1.307.1.2.1.3.2 | ScalarlucentPMChoiceNetAltIP | read-write | mandatory | The alternate IP address of the ChoiceNet server. |
| 1.3.6.1.4.1.307.1.2.1.3.3 | ScalarlucentPMChoiceNetPriPort | read-write | mandatory | The port number of the primary ChoiceNet server. |
| 1.3.6.1.4.1.307.1.2.1.3.4 | ScalarlucentPMChoiceNetAltPort | read-write | mandatory | The port number of the alternate ChoiceNet server. |
| 1.3.6.1.4.1.307.1.2.1.3.5 | ScalarlucentPMChoiceNetSecret | write-only | mandatory | The shared secret between the ChoiceNet server and client. |