LIVINGSTON-PM4-MIB
278 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.307.1.1.2.1 | NodelucentPM4Mib | |||
| 1.3.6.1.4.1.307.1.1.2.1.1 | ScalarlucentPM4MibRev | read-only | mandatory | This object specifies the current MIB revision number. Example of the MIB revision can be PM4xxx for PM4 product and PM3xxx for PM3 products etc. Where xxx can… |
| 1.3.6.1.4.1.307.1.1.2.1.2 | ScalarlucentPM4SWRev | read-only | mandatory | This object specifies the ComOS revision number. Example of the ComOS revision can be ComOS4.xx. Where xxx can be any combination of alpha-numeric characters. |
| 1.3.6.1.4.1.307.1.1.2.1.3 | NodelucentPM4Chassis | |||
| 1.3.6.1.4.1.307.1.1.2.1.3.1 | ScalarlucentPM4ChasSummary | read-only | mandatory | This object provides general information about the PortMaster 4 chassis operational status. This object is read-only. The DisplayString represents a summary of… |
| 1.3.6.1.4.1.307.1.1.2.1.3.2 | TablelucentPM4ChasCmdTable | not-accessible | mandatory | Table describing the commands that can be issued to the agent to perform specific actions to any card, port or device in the system. For example to erase the f… |
| 1.3.6.1.4.1.307.1.1.2.1.3.2.1 | RowlucentPM4ChasCmdEntry | not-accessible | mandatory | Entries in the command table for the chassis commands. This describes one entry or row in the command table. |
| 1.3.6.1.4.1.307.1.1.2.1.3.2.1.1 | ColumnlucentPM4ChasCmdIndex | read-write | mandatory | This object specifies the index in the command table. The values for this object is limited to the size of the command table on the network element. The size o… |
| 1.3.6.1.4.1.307.1.1.2.1.3.2.1.2 | ColumnlucentPM4ChasCmdBoardId | read-write | mandatory | This object specifies the board for which the command is to be applied. The values for this object is limited to the Max number of boards. |
| 1.3.6.1.4.1.307.1.1.2.1.3.2.1.3 | ColumnlucentPM4ChasCmdUnitType | read-write | mandatory | This object specifies the type of the device to which this command must apply. |
| 1.3.6.1.4.1.307.1.1.2.1.3.2.1.4 | ColumnlucentPM4ChasCmdUnitIndex | read-write | mandatory | This object specifies the interface index. |
| 1.3.6.1.4.1.307.1.1.2.1.3.2.1.5 | ColumnlucentPM4ChasCmdDevId | read-write | mandatory | This object specifies the sub-unit id for which the command must be applied to. This value will be used by the agent to index to the correct sub-device on a bo… |
| 1.3.6.1.4.1.307.1.1.2.1.3.2.1.6 | ColumnlucentPM4ChasCmdId | read-write | mandatory | This object specifies the command. Each command takes a unique value. The completion status of this command is set in the result object of the table. |
| 1.3.6.1.4.1.307.1.1.2.1.3.2.1.7 | ColumnlucentPM4ChasCmdParams | read-write | mandatory | This object specifies the command parameters. Each parameter must be seperated by a blank space. The last parameter is terminated with a ';'. |
| 1.3.6.1.4.1.307.1.1.2.1.3.2.1.8 | ColumnlucentPM4ChasCmdResult | read-only | mandatory | This object specifies the command result. The result for each of the previous 10 commands will be stored in a table, which can be retrieved by the client when … |
| 1.3.6.1.4.1.307.1.1.2.1.4 | NodelucentPM4ConfigMgmt | |||
| 1.3.6.1.4.1.307.1.1.2.1.4.1 | NodelucentPM4CmInterfaces | |||
| 1.3.6.1.4.1.307.1.1.2.1.4.1.1 | NodelucentPM4CmSerial | |||
| 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1 | TablelucentPM4SerialTable | not-accessible | mandatory | A list of serial interface entries. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1 | RowlucentPM4SerialEntry | not-accessible | mandatory | A serial interface entry containing objects at the physical and session layer. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.1 | ColumnlucentPM4SerialBoardIndex | read-only | mandatory | A unique value for each board in the PortMaster chassis. The Max value of this variable is limited by the number of boards in the chassis. This value is limite… |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.2 | ColumnlucentPM4SerialUnitType | read-only | mandatory | Unit type indicates the serial port. The interface table ifIndex is a combination of board index, unit type and unit index. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.3 | ColumnlucentPM4SerialIndex | read-only | mandatory | A unique value for each serial interface on a given board. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.4 | ColumnlucentPM4ModemId | read-only | mandatory | This object is the cross reference to the modem interface table index. The value is dynamically assigned when the call is established. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.5 | ColumnlucentPM4SerialPortNumber | read-only | mandatory | A serial port to which this modem is assigned for this call. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.6 | ColumnlucentPM4SerialPhysType | read-only | mandatory | The type of physical serial interface, distinguished according to the physical/link protocol(s) being currently used on the interface. When this object is set … |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.7 | ColumnlucentPM4SerialPortStatus | read-only | mandatory | The status of the serial interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.8 | ColumnlucentPM4SerialDS0State | read-write | mandatory | Cross reference value for each DS0 for a given T1/E1 line and a given board in the PM4 chassis. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.9 | ColumnlucentPM4SerialUser | read-only | mandatory | Name of the active user. Blank if not active. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.10 | ColumnlucentPM4SerialSessionId | read-only | mandatory | A unique Session Identifier which matches the RADIUS session ID. Blank when not using RADIUS. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.11 | ColumnlucentPM4SerialTypeHardwired | read-write | mandatory | The active type of service being provided by the serial interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.12 | ColumnlucentPM4SerialTypeNwDialIn | read-write | mandatory | The active type of service being provided by the serial interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.13 | ColumnlucentPM4SerialTypeNwDialout | read-write | mandatory | The active type of service being provided by the serial interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.14 | ColumnlucentPM4SerialTypeLogin | read-write | mandatory | The active type of service being provided by the serial interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.15 | ColumnlucentPM4SerialTypeDevice | read-write | mandatory | The active type of service being provided by the serial interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.16 | ColumnlucentPM4SerialTypeDeviceName | read-write | mandatory | Device name if the lucentPM4SerialTypeDevice is enabled. This is a string of characters (e.g. /dev/tty1) indicating the device name. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.17 | ColumnlucentPM4SerialDirection | read-only | mandatory | The direction the active session was initiated. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.18 | ColumnlucentPM4SerialStarted | read-only | mandatory | The amount of time this session has been active. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.19 | ColumnlucentPM4SerialIdle | read-only | mandatory | The amount of time this session has been idle. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.20 | ColumnlucentPM4SerialInSpeed | read-only | mandatory | An estimate of the serial interface's current inbound bandwidth in bits per second. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.21 | ColumnlucentPM4SerialOutSpeed | read-only | mandatory | An estimate of the serial interface's current outbound bandwidth in bits per second. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.22 | ColumnlucentPM4SerialIpAddress | read-only | mandatory | The IP address associated with the serial interface. If being used as a network type port, this is the remote user's IP address. If being used as a device or l… |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.23 | ColumnlucentPM4SerialifDescr | read-only | mandatory | A textual string containing information about the network interface bound to the serial interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.24 | ColumnlucentPM4SerialInOctets | read-only | mandatory | The total number of octets received on the serial interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.25 | ColumnlucentPM4SerialOutOctets | read-only | mandatory | The total number of octets transmitted on the serial interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.26 | ColumnlucentPM4SerialQOctets | read-only | mandatory | The total number of octets queued on the serial interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.2 | NodelucentPM4CmT1E1 | |||
| 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1 | TablelucentPM4T1E1Table | not-accessible | mandatory | A list of T1/E1 interface entries. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1 | RowlucentPM4T1E1Entry | not-accessible | mandatory | A T1/E1 entry containing objects at the physical layer. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.1 | ColumnlucentPM4T1E1BoardIndex | read-only | mandatory | A unique value for each board in the PM4 chassis. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.2 | ColumnlucentPM4T1E1UnitType | read-only | mandatory | This object specifies the type of the unit as the T1/E1 line. This value is a part of the interface table ifIndex. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.3 | ColumnlucentPM4T1E1Index | read-only | mandatory | A unique value for each T1/E1 interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.4 | ColumnlucentPM4T1E1SerialIndex | read-only | mandatory | The value of the instance for the serial port. This object provides a cross reference from the T1/E1 interface to the serial port to which it is mapped. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.5 | ColumnlucentPM4T1E1SerialCount | read-only | mandatory | The number of serial ports assigned to this interface. If this is a Channelized T1/E1, then the count is 24/32. If this is a fractional T1/E1, then the count c… |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.6 | ColumnlucentPM4T1E1PhysType | read-only | mandatory | The type of interface (T1 or E1). |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.7 | ColumnlucentPM4T1E1Status | read-only | mandatory | The current operational status of the interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.8 | ColumnlucentPM4T1E1Function | read-only | mandatory | The configured function of the interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.9 | ColumnlucentPM4T1E1Framing | read-only | mandatory | The configured line framing. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.10 | ColumnlucentPM4T1E1Encoding | read-only | mandatory | The configured line signal encoding. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.11 | ColumnlucentPM4T1E1PCM | read-only | mandatory | The configured voice modulation. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.12 | ColumnlucentPM4T1E1SuperSignal | read-write | mandatory | The configured supervisory signalling mode for this interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.13 | ColumnlucentPM4T1E1StartMode | read-write | mandatory | The configured start mode for this interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.14 | ColumnlucentPM4T1E1ChangeTime | read-only | mandatory | The amount of time since the last status change. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.15 | ColumnlucentPM4T1E1RecvLevel | read-only | mandatory | An estimate of the serial interface's current recieve signal level in DB. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.16 | ColumnlucentPM4T1E1BlueAlarms | read-only | mandatory | The total number of Blue Alarms on the interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.17 | ColumnlucentPM4T1E1YellowAlarms | read-only | mandatory | The total number of Yellow Alarms on the interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.18 | ColumnlucentPM4T1E1CarrierLoss | read-only | mandatory | The total number of times the interface has lost carrier. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.19 | ColumnlucentPM4T1E1SyncLoss | read-only | mandatory | The total number of times the interface has lost frame synchronization. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.20 | ColumnlucentPM4T1E1BipolarErrors | read-only | mandatory | The total number of bipolar violations detected on the interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.21 | ColumnlucentPM4T1E1CRCErrors | read-only | mandatory | The total number of frame level CRC errors detected on the interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.22 | ColumnlucentPM4T1E1SyncErrors | read-only | mandatory | The total number of frame synchronization errors detected on the interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.3 | NodelucentPM4CmModem | |||
| 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1 | TablelucentPM4ModemTable | not-accessible | mandatory | A list of modem entries. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1 | RowlucentPM4ModemEntry | not-accessible | mandatory | A modem entry containing objects at the session layer. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.1 | ColumnlucentPM4ModemBoardIndex | read-only | mandatory | A unique value for each modem interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.2 | ColumnlucentPM4ModemUnitType | read-only | mandatory | Unit type specifies the type of device or interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.3 | ColumnlucentPM4ModemIndex | read-only | mandatory | A unique value for each modem interface. The value of this object can be 1 - 96 for a Quad T1, 1 - 94 for a Tri E1 card. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.4 | ColumnlucentPM4ModemPortName | read-only | mandatory | A textual string containing the name of the serial interface (ie. S0, S1, etc). |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.5 | ColumnlucentPM4ModemStatus | read-only | mandatory | A current state of the modem. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.6 | ColumnlucentPM4ModemProtocol | read-only | mandatory | The error correcting protocol being used in the modem. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.7 | ColumnlucentPM4ModemCompression | read-only | mandatory | The compression being used in the modem interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.8 | ColumnlucentPM4ModemInSpeed | read-only | mandatory | An estimate of the modem interface's current inbound bandwidth in bits per second. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.9 | ColumnlucentPM4ModemOutSpeed | read-only | mandatory | An estimate of the modem interface's current outbound bandwidth in bits per second. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.10 | ColumnlucentPM4ModemInByteCount | read-only | mandatory | The total number of bytes received on the serial interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.11 | ColumnlucentPM4ModemOutByteCount | read-only | mandatory | The total number of bytes transmitted on the serial interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.12 | ColumnlucentPM4ModemRetrains | read-only | mandatory | The number of retrains attempted by the modem. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.13 | ColumnlucentPM4ModemRenegotiates | read-only | mandatory | The number of renegotiates attempted by the modem. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.14 | ColumnlucentPM4ModemCalls | read-only | mandatory | The number of times a call received by the modem. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.15 | ColumnlucentPM4ModemDetects | read-only | mandatory | The number of analog calls received by the modem. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.16 | ColumnlucentPM4ModemConnects | read-only | mandatory | The number of successful calls received by the modem. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4 | NodelucentPM4CmEther | |||
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1 | TablelucentPM4EtherTable | not-accessible | mandatory | A list of ethernet interface entries. This object is not accessible |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1 | RowlucentPM4EtherEntry | not-accessible | mandatory | Ethernet interface entry containing objects at the Session/Physical layers. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.1 | ColumnlucentPM4EtherBoardIndex | read-only | mandatory | A unique value for each ethernet board. The manager card has two ethernet interfaces at present. The ethernet interface in slot 4 has a board ID 10 and if ther… |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.2 | ColumnlucentPM4EtherIfType | read-only | mandatory | The interface type which together with the board ID and the interface number will uniquely identify the interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.3 | ColumnlucentPM4EtherIndex | read-only | mandatory | A unique value for each ethernet interface. The manager card has two ethernet interfaces at present. ether0(1) represents 10 Base-T interface and ether1(2) spe… |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.4 | ColumnlucentPM4EtherIfIndex | read-only | mandatory | IfIndex cross reference value for the ethernet interfaces. The manager card has two ethernet interfaces at present. ether0(67436545) represents 10 Base-T inter… |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.5 | ColumnlucentPM4EtherPortName | read-write | mandatory | A printable ASCII string specifying the name of the ethernet port. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.6 | ColumnlucentPM4EtherMacAddress | read-only | mandatory | Physical address of the interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.7 | ColumnlucentPM4EtherIpAddress | read-write | mandatory | IP address of the interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.8 | ColumnlucentPM4EtherIpGateway | read-write | mandatory | IP address of the gateway machine. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.9 | ColumnlucentPM4EtherPriNameServer | read-write | mandatory | IP address of the primary name server. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.10 | ColumnlucentPM4EtherAltNameServer | read-write | mandatory | IP address of the alternate name server. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.11 | ColumnlucentPM4EtherSubnetMask | read-write | mandatory | Subnet mask of the interface. Used to partition the network into different branches. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.12 | ColumnlucentPM4EtherInFilter | read-write | mandatory | IP Input packet filter. Used to control the type of IP packets reaching the interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.13 | ColumnlucentPM4EtherOutFilter | read-write | mandatory | IP output packet filter. Used to control the type of packets sent out of the interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.14 | ColumnlucentPM4EtherOptRip | read-write | mandatory | The RIP protocol enable/disable option. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.15 | ColumnlucentPM4EtherOptSlip | read-write | mandatory | The SLIP protocol enable/disable option. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.16 | ColumnlucentPM4EtherOptEtherDown | read-write | mandatory | Ethernet interface down enable/disable option. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.17 | ColumnlucentPM4EtherOptBcastHigh | read-write | mandatory | Use high one(s) broadcast address enable/disable option. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.18 | ColumnlucentPM4EtherOptSnmp | read-write | mandatory | Default SNMP protocol enable/disable option. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.19 | ColumnlucentPM4EtherOptNoListen | read-write | mandatory | Do not listen to RIP on the ether interface. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.20 | ColumnlucentPM4EtherOptDefaultRip | read-write | mandatory | Default RIP protocol enable/disable option. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.21 | ColumnlucentPM4EtherOptDefaultListen | read-write | mandatory | Default listen enable/disable option. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.22 | ColumnlucentPM4EtherOptIPFilter | read-write | mandatory | IP filter enable/disable option. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.23 | ColumnlucentPM4EtherOptDns | read-write | mandatory | DNS enable/disable option. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.24 | ColumnlucentPM4EtherOptPmeMsg | read-write | mandatory | PME Msg. enable/disable option. Whatever that means. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.25 | ColumnlucentPM4EtherOptNoClip | read-write | mandatory | No Clip enable/disable option. Whatever that means. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.26 | ColumnlucentPM4EtherOptEtherIpx | read-write | mandatory | Ether IPX enable/disable option. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.27 | ColumnlucentPM4EtherOptNetBIOS | read-write | mandatory | Net BIOS enable/disable option. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.28 | ColumnlucentPM4EtherOptAccounting | read-write | mandatory | Accounting enable/disable option. |
| 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.29 | ColumnlucentPM4EtherOptNoPAP | read-write | mandatory | PAP enable/disable option. |
| 1.3.6.1.4.1.307.1.1.2.1.5 | NodelucentPM4FaultMgmt | |||
| 1.3.6.1.4.1.307.1.1.2.1.5.1 | NodelucentPM4FaultMgmtIsolation | |||
| 1.3.6.1.4.1.307.1.1.2.1.5.1.1 | TablelucentPM4FaultMgmtChasTrap | not-accessible | mandatory | Chassis Trap table which indicates one of several Traps. The chassis trap table stores the previous history of the traps which can be retrieved by the manageme… |
| 1.3.6.1.4.1.307.1.1.2.1.5.1.1.1 | RowlucentPM4FMChasTrapEntry | not-accessible | mandatory | Entry in the chassis Trap table. Each trap is uniquely identified by an index. This object is not accessible and present for MIB clarity. |
| 1.3.6.1.4.1.307.1.1.2.1.5.1.1.1.1 | ColumnlucentPM4FMChasTrapIndex | read-only | mandatory | Index into the Trap table on the agent. This table stores the previous 500 traps which can be retrieved at any given time. |
| 1.3.6.1.4.1.307.1.1.2.1.5.1.1.1.2 | ColumnlucentPM4FMChasTrapBoardID | read-only | mandatory | Board ID is the board number for which this trap is stored. If the trap is for an auxillary device such as a power supply or fan, this value is set to zero. |
| 1.3.6.1.4.1.307.1.1.2.1.5.1.1.1.3 | ColumnlucentPM4FMChasTrapUnitType | read-only | mandatory | Uniquely specifies the unit type for this trap. The unit can be a board or any other device in the chassis such as a fan or a power supply. |
| 1.3.6.1.4.1.307.1.1.2.1.5.1.1.1.4 | ColumnlucentPM4FMChasTrapUnitIndex | read-only | mandatory | Uniquely specifies the unit index. The unit index is same as the ifIndex for T1/E1 interfaces, or the modemIndex for the modems or fan or power supply index fo… |
| 1.3.6.1.4.1.307.1.1.2.1.5.1.1.1.5 | ColumnlucentPM4FMChasTrapStatus | read-only | mandatory | Trap status specifies the associated object in the Trap is online(2), offline(3), maintenance(4) or fault(5). |
| 1.3.6.1.4.1.307.1.1.2.1.5.1.1.1.6 | ColumnlucentPM4FMChasTrapSeverity | read-only | mandatory | Trap severity specifies the severity of the Trap for the associated object. |
| 1.3.6.1.4.1.307.1.1.2.1.5.1.1.1.7 | ColumnlucentPM4FMChasTrapTimeStamp | read-only | mandatory | This object stores the timestamp of this trap. |
| 1.3.6.1.4.1.307.1.1.2.1.5.1.1.1.8 | ColumnlucentPM4FMChasTrapState | read-write | mandatory | This object stores the Trap state of this trap. |
| 1.3.6.1.4.1.307.1.1.2.1.5.1.2 | ScalarlucentPM4FMBoardIndex | not-accessible | mandatory | Board index uniquely specifies the board in the chassis. This object is set to zero for power supplies, fans and other auxillary devices. This object is not ac… |
| 1.3.6.1.4.1.307.1.1.2.1.5.1.3 | ScalarlucentPM4FMUnitIndex | not-accessible | mandatory | Unit index uniquely specifies the T1/E1 line, or modem or any device (logical/physical) in the chassis. This object is not accessible through Get, Get-Next or … |
| 1.3.6.1.4.1.307.1.1.2.1.5.1.4 | ScalarlucentPM4FMUnitType | not-accessible | mandatory | Unit type specifies the T1/E1 line, or modem or any device in the chassis. This object is not accessible through Get, Get-Next or Set PDUs. It is sent out as p… |
| 1.3.6.1.4.1.307.1.1.2.1.5.1.5 | ScalarlucentPM4FMUnitTrapStatus | not-accessible | mandatory | Trap status specifies the associated object in the Trap. This object is not accessible other than when produced as the result of a trap. |
| 1.3.6.1.4.1.307.1.1.2.1.5.1.6 | ScalarlucentPM4FMUnitTrapSeverity | not-accessible | mandatory | Trap severity specifies the severity of the Trap for the associated object. This object is not accessible except when produced as the result of a trap. |
| 1.3.6.1.4.1.307.1.1.2.1.5.2 | NodelucentPM4FMTrapConfig | |||
| 1.3.6.1.4.1.307.1.1.2.1.5.2.1 | TablelucentPM4FMEqpTrapCfg | not-accessible | mandatory | Equipment Trap configuration table configure Traps. The objects in this table are used to enable or disable traps on a per board/interface/device basis. This o… |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.1.1 | RowlucentPM4FMEqpTrapCfgEntry | not-accessible | mandatory | Entry in the equipment Trap config table. Each trap is uniquely identified by the board ID, Unit type and unit index. For auxillary devices such as power suppl… |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.1.1.1 | ColumnlucentPM4FMEqpBoardIndex | read-only | mandatory | Board ID for which the Trap configuration need to apply. The board ID is zero if this trap configuration is for an auxillary device such as fans or power suppl… |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.1.1.2 | ColumnlucentPM4FMEqpUnitType | read-only | mandatory | Unit type alongwith the board index and unit index specifies uniquely the device/interface which is being configured. |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.1.1.3 | ColumnlucentPM4FMEqpUnitIndex | read-only | mandatory | Unit index refers to the interface or sub-device such as a modem, serial port etc. For devices such as power supplies and fans this object is zero. |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.1.1.4 | ColumnlucentPM4FMEqpTrapId | read-write | mandatory | Trap ID indicating the trap for which the configuration must apply. |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.1.1.5 | ColumnlucentPM4FMEqpTrapCtl | read-write | mandatory | Trap control which configures the trap off(1) or on(2). When the trap is configured as off(1), the trap is not sent out to the management station. When configu… |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.1.1.6 | ColumnlucentPM4FMEqpRepTimer | read-write | mandatory | If the trap is to be repeated, this object specifies the time in seconds. When this object value is set to 0, it indicates the trap is non-repeat trap. |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.2 | TablelucentPM4FMT1E1ThreshTrapCfg | not-accessible | mandatory | T1/E1 Threshold Trap configuration table to configure the thresholds for various T1/E1 traps. This object is not-accessible and present for MIB clarity. |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.2.1 | RowlucentPM4FMT1E1ThreshTrapCfgEntry | not-accessible | mandatory | Entry in the T1/E1 threshold trap config table. Each trap is uniquely identified by the board index, unit type and unit index which is the T1/E1 interface numb… |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.2.1.1 | ColumnlucentPM4FMT1E1ThreshBoardIndex | read-only | mandatory | Board ID for which the Trap threshold configuration must apply. It includes boards 1 - 10 and other devices such as power supplies and fans etc. |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.2.1.2 | ColumnlucentPM4FMT1E1ThreshUnitType | read-only | mandatory | Unit type for which the Trap threshold configuration must be applied. |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.2.1.3 | ColumnlucentPM4FMT1E1ThreshESs | read-write | mandatory | The threshold for errored seconds on the interface. A trap is issued when this set limit is exceeded. When this threshold exceeds, the performance of the inter… |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.2.1.4 | ColumnlucentPM4FMT1E1ThreshSESs | read-write | mandatory | The threshold for severely errored seconds on the interface. A trap is issued when this limit is exceeded. A severely errored seconds is a second with 320 or m… |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.2.1.5 | ColumnlucentPM4FMT1E1ThreshSEFSs | read-write | mandatory | The threshold for severely errored framing seconds. A trap is issued when this threshold is exceeded. A severely errored framing second is a second with one or… |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.2.1.6 | ColumnlucentPM4FMT1E1ThreshUASs | read-write | mandatory | The threshold for unavailable seconds. A trap is issued when this set threshold is exceeded. Unavailable seconds are calculated by counting the number of secon… |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.2.1.7 | ColumnlucentPM4FMT1E1ThreshCSSs | read-write | mandatory | The threshold for controlled slip seconds on the interface. A trap is issued when this set threshold is exceeded. A controlled slip second is a one-second inte… |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.2.1.8 | ColumnlucentPM4FMT1E1ThreshPCVs | read-write | mandatory | The threshold for path code violations on the interface. A trap is issued when this set threshold is exceeded. PCV is a frame syncronization bit error in the D… |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.2.1.9 | ColumnlucentPM4FMT1E1ThreshLESs | read-write | mandatory | The threshold for line errored seconds on the interface. A trap is sent to the manager when this set threshold is exceeded. A line errored second, according to… |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.2.1.10 | ColumnlucentPM4FMT1E1ThreshBESs | read-write | mandatory | The threshold for bursty errored seconds on the interface. A trap is sent to the manager when this set threshold is exceeded. A bursty errored second is a seco… |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.2.1.11 | ColumnlucentPM4FMT1E1ThreshDMs | read-write | mandatory | The threshold for degraded minutes on the interface. A trap is sent to the manager when this set threshold is exceeded. Degraded minutes are determined by coll… |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.2.1.12 | ColumnlucentPM4FMT1E1ThreshRepTimer | read-write | mandatory | If the trap is to be repeated, this object specifies the time in seconds. When this object value is set to 0, it indicates the trap is non-repeat trap. |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.2.1.13 | ColumnlucentPM4FMT1E1ThreshTrapAck | read-write | mandatory | If set to ack(3), clears the trap condition. If the value is set to noack(2), leaves the trap condition unchanged. |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.3 | TablelucentPM4FMEnvTrapCfg | not-accessible | mandatory | Environment Trap configuration table. This table enables configuration of voltage, power levels and temperature ranges for different units in the chassis. This… |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.3.1 | RowlucentPM4FMEnvTrapCfgEntry | not-accessible | mandatory | Entry in the environment trap config table. Each trap is uniquely identified by the board index, unit type and unit index. This object is not accessible and pr… |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.3.1.1 | ColumnlucentPM4FMEnvBoardID | read-only | mandatory | Board ID specifies the board identifier for this trap. If the trap configuration is for an auxillary device such as a power supply or fan, this object will be … |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.3.1.2 | ColumnlucentPM4FMEnvUnitType | read-only | mandatory | Unit for which the Trap configuration must to apply. |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.3.1.3 | ColumnlucentPM4FMEnvUnitIndex | read-only | mandatory | Unit index specifies the interface or sub-unit for this trap (modem or T1/E1 interface etc.). The unit type and the unit index will uniquely identify the auxil… |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.3.1.4 | ColumnlucentPM4FMEnvOptUnitTemp | read-write | mandatory | The optimum temperature for this unit. A trap is generated when the temperature deviates from the specified range. The temperature is specified as an integer i… |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.3.1.5 | ColumnlucentPM4FMEnvUnitTempRange | read-write | mandatory | The temperature range above which a trap is generated. The temperature must be specified as an integer in degree Farenhiet (for example +/- 5 degree Far.). |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.3.1.6 | ColumnlucentPM4FMEnvOptUnitPwrLvl | read-write | mandatory | The optimal power level that is appropriate for this unit. A trap is generated when the power level fluctuates outside the limits set. |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.3.1.7 | ColumnlucentPM4FMEnvUnitPwrRange | read-write | mandatory | The power range specified in volts. A trap is generated when the power level fluctuates outside the Opt Pwr +/- Range set. |
| 1.3.6.1.4.1.307.1.1.2.1.5.2.3.1.8 | ColumnlucentPM4FMEnvTrapCtl | read-write | mandatory | The trap control used to turn the environment traps on or off for the specified unit(s). |
| 1.3.6.1.4.1.307.1.1.2.1.6 | NodelucentPM4PerfMgmt | |||
| 1.3.6.1.4.1.307.1.1.2.1.6.1 | NodelucentPM4T1E1PerfMgmt | |||
| 1.3.6.1.4.1.307.1.1.2.1.6.1.1 | TablelucentPM4T1E1PMCur | not-accessible | mandatory | Performance management table representing the performance statistics of T1/E1 interfaces in the box. This table represents the current 15 mins statistics. This… |
| 1.3.6.1.4.1.307.1.1.2.1.6.1.1.1 | RowlucentPM4T1E1PMCurEntry | not-accessible | mandatory | Performance management table entries for all the T1/E1 interfaces in the box. This table represents the current 15 mins statistics. This object is not accessib… |
| 1.3.6.1.4.1.307.1.1.2.1.6.1.1.1.1 | ColumnlucentPM4T1E1PMCurBoard | read-only | mandatory | Board number of the interface. The global interface number is computed by using the Most Significant byte of the ifIndex and the Least Significant 2 bytes repr… |
| 1.3.6.1.4.1.307.1.1.2.1.6.1.1.1.2 | ColumnlucentPM4T1E1PMCurUnitType | read-only | mandatory | Unit type indicates the type of interface as T1/E1 or T3/E3 in future. This is part of the interface table ifIndex which is constructed with boardID, unit type… |
| 1.3.6.1.4.1.307.1.1.2.1.6.1.1.1.3 | ColumnlucentPM4T1E1PMCurLineNum | read-only | mandatory | Line number uniquely identifies the T1/E1 interface on a given board. |
| 1.3.6.1.4.1.307.1.1.2.1.6.1.1.1.4 | ColumnlucentPM4T1E1PMCurIfIndex | read-only | mandatory | Interface table ifIndex cross reference. The global interface number is computed by using the Most Significant byte as the board ID and the Least Significant 2… |
| 1.3.6.1.4.1.307.1.1.2.1.6.1.1.1.5 | ColumnlucentPM4T1E1PMCurESs | read-only | mandatory | The number of errored seconds, encountered by the line in the current 15 mins interval. |
| 1.3.6.1.4.1.307.1.1.2.1.6.1.1.1.6 | ColumnlucentPM4T1E1PMCurSESs | read-only | mandatory | The number of Severely Errored Seconds encountered by the line in the current 15 mins interval. |
| 1.3.6.1.4.1.307.1.1.2.1.6.1.1.1.7 | ColumnlucentPM4T1E1PMCurSEFSs | read-only | mandatory | The number of Severely Errored Framing Seconds encountered by the line in the current 15 mins interval. |
| 1.3.6.1.4.1.307.1.1.2.1.6.1.1.1.8 | ColumnlucentPM4T1E1PMCurUASs | read-only | mandatory | The number of Unavailable Seconds encountered by the line in the current 15 mins interval. |
| 1.3.6.1.4.1.307.1.1.2.1.6.1.1.1.9 | ColumnlucentPM4T1E1PMCurCSSs | read-only | mandatory | The number of Controlled Slip Seconds encountered by the line in the current 15 mins interval. |
| 1.3.6.1.4.1.307.1.1.2.1.6.1.1.1.10 | ColumnlucentPM4T1E1PMCurPCVs | read-only | mandatory | The number of Path Coding Violations encountered by the line in the current 15 mins interval. |
| 1.3.6.1.4.1.307.1.1.2.1.6.1.1.1.11 | ColumnlucentPM4T1E1PMCurLESs | read-only | mandatory | The number of Line Errored Seconds encountered by the line in the current 15 mins interval. |
| 1.3.6.1.4.1.307.1.1.2.1.6.1.1.1.12 | ColumnlucentPM4T1E1PMCurBESs | read-only | mandatory | The number of Bursty Errored Seconds encountered by the line in the current 15 mins interval. |
| 1.3.6.1.4.1.307.1.1.2.1.6.1.1.1.13 | ColumnlucentPM4T1E1PMCurDMs | read-only | mandatory | The number of Degraded Minutes encountered by the line in the current 15 mins interval. |
| 1.3.6.1.4.1.307.1.1.2.1.6.1.1.1.14 | ColumnlucentPM4T1E1PMCurLCVs | read-only | mandatory | The number of Line Code Violations encountered by the line in the current 15 mins interval. |
| 1.3.6.1.4.1.307.1.1.2.1.6.2 | TablelucentPM4T1E1PMInt | not-accessible | mandatory | Performance management table representing the performance statistics of T1/E1 interfaces in the box. This table represents the 24 hr statistics divided into 96… |
| 1.3.6.1.4.1.307.1.1.2.1.6.2.1 | RowlucentPM4T1E1PMIntEntry | not-accessible | mandatory | Performance management table entries for all the T1/E1 interfaces in the box. This table represents the 24 hr statistics divided into 96 15 mins intervals. Thi… |
| 1.3.6.1.4.1.307.1.1.2.1.6.2.1.1 | ColumnlucentPM4T1E1PMIntBoard | read-only | mandatory | Board number of the interface. The global interface number is computed by using the Most Significant nibble of the ifIndex and the Least Significant nibble rep… |
| 1.3.6.1.4.1.307.1.1.2.1.6.2.1.2 | ColumnlucentPM4T1E1PMIntUnitType | read-only | mandatory | Unit type indicates the type of physical or logical device. The unit type for this table is either T1 or E1. |
| 1.3.6.1.4.1.307.1.1.2.1.6.2.1.3 | ColumnlucentPM4T1E1PMIntLineNum | read-only | mandatory | Line number uniquely identifies the T1/E1 interface for this board. |
| 1.3.6.1.4.1.307.1.1.2.1.6.2.1.4 | ColumnlucentPM4T1E1PMIntInterval | read-only | mandatory | Interval number for a given board. The 24 hr period is divided into 96 15 min intervals, where 1 is the most recent and 96 is the least recent. |
| 1.3.6.1.4.1.307.1.1.2.1.6.2.1.5 | ColumnlucentPM4T1E1PMIntIfIndex | read-only | mandatory | Interface table ifIndex cross reference. The global interface number is computed by using the Most Significant byte as the board ID and the Least Significant 2… |
| 1.3.6.1.4.1.307.1.1.2.1.6.2.1.6 | ColumnlucentPM4T1E1PMIntESs | read-only | mandatory | The number of errored seconds, encountered by the line in the last 24 hrs divided into 96 15 mins intervals. |
| 1.3.6.1.4.1.307.1.1.2.1.6.2.1.7 | ColumnlucentPM4T1E1PMIntSESs | read-only | mandatory | The number of Severely Errored Seconds encountered by the line for one of the 96 15 mins intervals. |
| 1.3.6.1.4.1.307.1.1.2.1.6.2.1.8 | ColumnlucentPM4T1E1PMIntSEFSs | read-only | mandatory | The number of Severely Errored Framing Seconds encountered by the line for one of the 96 15 mins intervals. |
| 1.3.6.1.4.1.307.1.1.2.1.6.2.1.9 | ColumnlucentPM4T1E1PMIntUASs | read-only | mandatory | The number of Unavailable Seconds encountered by the line for one of the 96 15 mins intervals. |
| 1.3.6.1.4.1.307.1.1.2.1.6.2.1.10 | ColumnlucentPM4T1E1PMIntCSSs | read-only | mandatory | The number of Controlled Slip Seconds encountered by the line for one of the 96 15 mins intervals. |
| 1.3.6.1.4.1.307.1.1.2.1.6.2.1.11 | ColumnlucentPM4T1E1PMIntPCVs | read-only | mandatory | The number of Path Coding Violations encountered by the line for one of the 96 15 mins intervals. |
| 1.3.6.1.4.1.307.1.1.2.1.6.2.1.12 | ColumnlucentPM4T1E1PMIntLESs | read-only | mandatory | The number of Line Errored Seconds encountered by the line for one of the 96 15 mins intervals. |
| 1.3.6.1.4.1.307.1.1.2.1.6.2.1.13 | ColumnlucentPM4T1E1PMIntBESs | read-only | mandatory | The number of Bursty Errored Seconds encountered by the line for one of the 96 15 mins intervals. |
| 1.3.6.1.4.1.307.1.1.2.1.6.2.1.14 | ColumnlucentPM4T1E1PMIntDMs | read-only | mandatory | The number of Degraded Minutes encountered by the line for one of the 96 15 mins intervals. |
| 1.3.6.1.4.1.307.1.1.2.1.6.2.1.15 | ColumnlucentPM4T1E1PMIntLCVs | read-only | mandatory | The number of Line Code Violations encountered by the line for one of the 96 15 mins intervals. |
| 1.3.6.1.4.1.307.1.1.2.1.6.3 | TablelucentPM4T1E1PMTotal | not-accessible | mandatory | Performance management table representing the performance statistics of T1/E1 interfaces in the box. This table represents the 24 hr statistics divided into 96… |
| 1.3.6.1.4.1.307.1.1.2.1.6.3.1 | RowlucentPM4T1E1PMTotalEntry | not-accessible | mandatory | Performance management table entries for all the T1/E1 interfaces in the box. This table represents the 24 hr statistics divided into 96 15 mins intervals. Thi… |
| 1.3.6.1.4.1.307.1.1.2.1.6.3.1.1 | ColumnlucentPM4T1E1PMTotalBoard | read-only | mandatory | Board number of the interface. The global interface number is computed by using the Most Significant nibble of the ifIndex and the Least Significant nibble rep… |
| 1.3.6.1.4.1.307.1.1.2.1.6.3.1.2 | ColumnlucentPM4T1E1PMTotalUnitType | read-only | mandatory | Unit type indicates the type of physical or logical device. The unit type for this table is either T1 or E1. |
| 1.3.6.1.4.1.307.1.1.2.1.6.3.1.3 | ColumnlucentPM4T1E1PMTotalLineNum | read-only | mandatory | Interface number for a given board. The global interface number is computed by using the Most Significant nibble of the ifIndex and the Least Significant nibbl… |
| 1.3.6.1.4.1.307.1.1.2.1.6.3.1.4 | ColumnlucentPM4T1E1PMTotalIfIndex | read-only | mandatory | IfIndex cross reference value. This value is obtained from the Board/board number and interface number by combining them into the LSByte. The upper nibble repr… |
| 1.3.6.1.4.1.307.1.1.2.1.6.3.1.5 | ColumnlucentPM4T1E1PMTotalESs | read-only | mandatory | The cumulative value of errored seconds, encountered by the line in the last 24 hrs. |
| 1.3.6.1.4.1.307.1.1.2.1.6.3.1.6 | ColumnlucentPM4T1E1PMTotalSESs | read-only | mandatory | The cumulative value Severely Errored Seconds encountered by the line for the 24 hr period. |
| 1.3.6.1.4.1.307.1.1.2.1.6.3.1.7 | ColumnlucentPM4T1E1PMTotalSEFSs | read-only | mandatory | The cumulative value of Severely Errored Framing Seconds encountered by the line for the 24 hr period. |
| 1.3.6.1.4.1.307.1.1.2.1.6.3.1.8 | ColumnlucentPM4T1E1PMTotalUASs | read-only | mandatory | The cumulative value of Unavailable Seconds encountered by the line for the 24 hr period. |
| 1.3.6.1.4.1.307.1.1.2.1.6.3.1.9 | ColumnlucentPM4T1E1PMTotalCSSs | read-only | mandatory | The cumulative value of Controlled Slip Seconds encountered by the line for the 24 hr period. |
| 1.3.6.1.4.1.307.1.1.2.1.6.3.1.10 | ColumnlucentPM4T1E1PMTotalPCVs | read-only | mandatory | The cumulative value of Path Coding Violations encountered by the line for the 24 hr period. |
| 1.3.6.1.4.1.307.1.1.2.1.6.3.1.11 | ColumnlucentPM4T1E1PMTotalLESs | read-only | mandatory | The cumulative value of Line Errored Seconds encountered by the line for the 24 hr period. |
| 1.3.6.1.4.1.307.1.1.2.1.6.3.1.12 | ColumnlucentPM4T1E1PMTotalBESs | read-only | mandatory | The cumulative value of Bursty Errored Seconds encountered by the line for the 24 hr period. |
| 1.3.6.1.4.1.307.1.1.2.1.6.3.1.13 | ColumnlucentPM4T1E1PMTotalDMs | read-only | mandatory | The cumulative value of Degraded Minutes encountered by the line for the 24 hr period. |
| 1.3.6.1.4.1.307.1.1.2.1.6.3.1.14 | ColumnlucentPM4T1E1PMTotalLCVs | read-only | mandatory | The cumulative value of Line Code Violations encountered by the line for the 24 hr period. |
| 1.3.6.1.4.1.307.1.1.2.1.7 | NodelucentPM4SecurityMgmt | |||
| 1.3.6.1.4.1.307.1.1.2.1.8 | NodelucentPM4AcctMgmt | |||
| 1.3.6.1.4.1.307.1.1.2.1.8.1 | NodelucentPM4AcctMgmtComm | |||
| 1.3.6.1.4.1.307.1.1.2.1.8.1.1 | TablelucentPM4SnmpCommTable | not-accessible | mandatory | The SNMP Community Table. This table contains entries to restrict the SNMP get and set operations. |
| 1.3.6.1.4.1.307.1.1.2.1.8.1.1.1 | RowlucentPM4SnmpCommEntry | not-accessible | mandatory | The entries in the community table. |
| 1.3.6.1.4.1.307.1.1.2.1.8.1.1.1.1 | ColumnlucentPM4SnmpCommIndex | read-only | mandatory | The index of the command in the command table. A MAX of 10 network management stations must be specified along with their community names. |
| 1.3.6.1.4.1.307.1.1.2.1.8.1.1.1.2 | ColumnlucentPM4SnmpCommName | not-accessible | mandatory | The name of the SNMP Community for SNMP readers and writers. The size of the string is limited to 32 characters. All characters in the string must be printable. |
| 1.3.6.1.4.1.307.1.1.2.1.8.1.1.1.3 | ColumnlucentPM4SnmpCommIpAddr | read-write | mandatory | The IP Address of the remote community. |
| 1.3.6.1.4.1.307.1.1.2.1.8.1.1.1.4 | ColumnlucentPM4SnmpCommReadAccess | read-write | mandatory | Read access enable or disable for this community. When enabled, it allows read-only variable access using this community string by the SNMP client. |
| 1.3.6.1.4.1.307.1.1.2.1.8.1.1.1.5 | ColumnlucentPM4SnmpCommWriteAccess | read-write | mandatory | Write access enable or disable for this community. When enabled, the agent allows write access to the parameters on the agent by the SNMP clients. |
| 1.3.6.1.4.1.307.1.1.2.1.8.1.1.1.6 | ColumnlucentPM4SnmpCommTraps | read-write | mandatory | Traps receiving capability enable or disable for this community. When enabled, the SNMP agent forwards the traps generated in the box to this SNMP client. |
| 1.3.6.1.4.1.307.1.1.2.1.8.1.1.1.7 | ColumnlucentPM4SnmpCommStatus | read-write | mandatory | The status of the entry for this community. If the status is set to normal, it allows requests from this SNMP client else it discards the requests from this cl… |
| 1.3.6.1.4.1.307.1.1.2.1.8.1.1.1.8 | ColumnlucentPM4SnmpCommLastError | read-only | mandatory | If there is an error on a request, this variable may contain a message indicating the error. |
| 1.3.6.1.4.1.307.1.1.2.1.8.2 | NodelucentPM4AcctMgmtCallEvent | |||
| 1.3.6.1.4.1.307.1.1.2.1.8.2.1 | TablelucentPM4AMCallEventTable | not-accessible | mandatory | Call accounting table containing a list of call events, which may be used for billing purposes. |
| 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1 | RowlucentPM4AMCallEventEntry | not-accessible | mandatory | The entries in the accounting/billing table. |
| 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1.1 | ColumnlucentPM4AMCEIndex | read-only | mandatory | Call event index used as an index into the call event table. The table stores call events which may be used for billing. |
| 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1.2 | ColumnlucentPM4AMCETimeStamp | read-only | mandatory | Time stamp for this event in seconds since the last reboot. |
| 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1.3 | ColumnlucentPM4AMCEType | read-only | mandatory | Specifies the type of event associated with this entry in the call event table. |
| 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1.4 | ColumnlucentPM4AMCESvcType | read-only | mandatory | The type of service provided to the user. This field is meaningful if the event type is servicechanged(4), or namechanged(5) events. In all other cases, this o… |
| 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1.5 | ColumnlucentPM4AMCEUName | read-only | mandatory | User name of the dialed in user. This object returns the valid user name when the event type is servicechanged(4) or namechanged(5). In all other cases, it ret… |
| 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1.6 | ColumnlucentPM4AMCEModemBoard | read-only | mandatory | Board ID of the modem which handled this call. This value can be used to diagnose modem related problems (dropping the call, retraining too frequently etc.). |
| 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1.7 | ColumnlucentPM4AMCEModemID | read-only | mandatory | Identifies the specific modem on a board which handled this call. Can be used to diagnose modem related problems. |
| 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1.8 | ColumnlucentPM4AMCEModemPort | read-only | mandatory | A textual string containing the name of the serial interface (ie. S0, S1, etc). |
| 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1.9 | ColumnlucentPM4AMCEDataRate | read-only | mandatory | Specifies the speed of this connection. Speed is specified as baud rate for modem calls and receive data rate for ISDN calls. This object returns a 0 for call … |
| 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1.10 | ColumnlucentPM4AMCECallingPartyID | read-only | mandatory | Calling party ID. This object is valid only for call answered, call originated, and call cleared events. For all invalid event types, this object is set to NUL… |
| 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1.11 | ColumnlucentPM4AMCECalledPartyID | read-only | mandatory | Called party ID. This object is valid only for call answered, call originated, and call cleared events. For all invalid event types, this object is set to NULL. |
| 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1.12 | ColumnlucentPM4AMCEInOctets | read-only | mandatory | Total octets received during this call. This object is cleared at the end of each call. |
| 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1.13 | ColumnlucentPM4AMCEOutOctets | read-only | mandatory | Total octets sent out during this call. This object is cleared at the end of each call. |
| 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1.14 | ColumnlucentPM4AMCECallCharge | read-only | mandatory | Call charge for this call. This object is valid only when the event is call cleared. For all other events this object is set to zero. |
| 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1.15 | ColumnlucentPM4AMCEDisconnReason | read-only | mandatory | Reason for the disconnect. |
| 1.3.6.1.4.1.307.1.1.2.2 | NodelucentPM4Traps | |||
| 1.3.6.1.4.1.307.1.1.2.2.1 | NodelucentPM4BoardOfflineTrap | Board down trap. The variable bindings in the Trap packet provide information about the chassis name, board number and the trap status. This Trap must be clear… | ||
| 1.3.6.1.4.1.307.1.1.2.2.2 | NodelucentPM4BoardOnlineTrap | Board up trap. The variable bindings in the Trap packet provide information about the chassis name, board number and the trap status. This Trap must be cleared… | ||
| 1.3.6.1.4.1.307.1.1.2.2.3 | NodelucentPM4PwrSupFailTrap | Power supply failed trap. The variable bindings in the Trap packet provide information about the chassis name, power supply unit and the trap status. This Trap… | ||
| 1.3.6.1.4.1.307.1.1.2.2.4 | NodelucentPM4PwrSupWarnTrap | Power supply warning trap. The variable bindings in the Trap packet provide information about the chassis name, power supply unit and the trap status. This Tra… | ||
| 1.3.6.1.4.1.307.1.1.2.2.5 | NodelucentPM4PwrSupRestoredTrap | Power supply restored trap. The variable bindings in the Trap packet provide information about the chassis name, power supply unit and the trap status. This Tr… | ||
| 1.3.6.1.4.1.307.1.1.2.2.6 | NodelucentPM4FanFailTrap | Fan failure trap. The variable bindings in the Trap packet provide information about the chassis name, fan number and the trap status. This Trap must be cleare… | ||
| 1.3.6.1.4.1.307.1.1.2.2.7 | NodelucentPM4FanRestoredTrap | Fan restored trap. The variable bindings in the Trap packet provide information about the chassis name, fan number and the trap status. This Trap is issued whe… | ||
| 1.3.6.1.4.1.307.1.1.2.2.8 | NodelucentPM4BoardTempWarnTrap | Board temperature warning trap. The variable bindings in the Trap packet provide information about the chassis name, unit and the trap status. This Trap is iss… | ||
| 1.3.6.1.4.1.307.1.1.2.2.9 | NodelucentPM4BoardTempNormalTrap | Board temperature normal trap. The variable bindings in the Trap packet provide information about the chassis name, unit and the trap status. This Trap is issu… | ||
| 1.3.6.1.4.1.307.1.1.2.2.10 | NodelucentPM4BoardTooHotTrap | Board trap. The variable bindings in the Trap packet provide information about the chassis name, board number and the trap status. This Trap must be cleared ma… | ||
| 1.3.6.1.4.1.307.1.1.2.2.11 | NodelucentPM4ModemFailTrap | Modem failure trap. The variable bindings in the Trap packet provide information about the chassis name, modem number and the trap status. This Trap must be cl… | ||
| 1.3.6.1.4.1.307.1.1.2.2.12 | NodelucentPM4T1E1LineDownTrap | T1/E1 Line trap. The variable bindings in the Trap packet provide all the information for the clients to display the Board ID, Line ID and the status of the li… | ||
| 1.3.6.1.4.1.307.1.1.2.2.13 | NodelucentPM4T1E1LineUpTrap | T1/E1 Line trap. The variable bindings in the Trap packet provide all the information for the clients to display the Board ID, Line ID and the status of the li… | ||
| 1.3.6.1.4.1.307.1.1.2.2.14 | NodelucentPM4T1E1LineThreshTrap | T1/E1 Line trap. The variable bindings in the Trap packet provide all the information for the clients to display the Board ID, Line ID and the trap type. This … | ||
| 1.3.6.1.4.1.307.1.1.2.2.15 | NodelucentPM4BoardPwrOffTrap | This trap is issued when the power supply to the board is not enough. The variable bindings in the Trap packet provide information about the chassis name, boar… | ||
| 1.3.6.1.4.1.307.1.1.2.2.16 | NodelucentPM4RadiusAuthFailTrap | This trap is issued when the Radius authentication fails. This Trap must be cleared manually. The trap provides information about the board and the modem numbe… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PMAlarmType | INTEGER { informational(1), warning(2), minor(3), major(4), critical(5) } | ||
| PMDiagCmdStatus | INTEGER { success(1), fail(2), inprogress(3), notsupported(4), aborted(5), other(6) } | ||
| PMDiagTestCntrl | INTEGER { normal(1), start(2), stop(3), abort(4) } | ||
| PMEquipPRIStatus | INTEGER { up(1), down(2), loopback(3), fault(4) } | ||
| PMEquipStatus | INTEGER { up(1), down(2), maintenance(3), fault(4), other(5) } | ||
| PMUnitType | INTEGER { mrgmodule(1), quadt1(2), trie1(3), modem(4), serialport(5), ether0(6), ether1(7), console(8), acpwrsup(9), fan(10), dcpwrsup(11), allunits(255) } |