LJ2025-MIB
270 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3 | Nodeorg | |||
| 1.3.6 | Nodedod | |||
| 1.3.6.1 | Nodeinternet | |||
| 1.3.6.1.4 | Nodeprivate | |||
| 1.3.6.1.4.1 | Nodeenterprises | |||
| 1.3.6.1.4.1.11 | NodehpPrintServer | |||
| 1.3.6.1.4.1.11.2 | Nodenm | |||
| 1.3.6.1.4.1.11.2.3.9.4.2 | Nodedm | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1 | Nodedevice | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1 | Nodesystem | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1 | Nodesettings-system | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.1 | Scalarenergy-star | read-only | optional | Returns or changes the Energy Star sleep value. If the value is greater than zero, then the device will go into energy saving sleep mode after the print engine… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.2 | Scalarsleep-mode | read-only | optional | Returns eTrue if the device is in energy saving sleep mode, otherwise returns eFalse. Setting SLEEP-MODE to eFalse causes the device to wake up, if it is in sl… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.9 | Scalarservice-password | write-only | optional | When set to the password value, other service related objects become 'visible' (i.e readable) or become writable. When written with any other value, the servic… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.31 | Scalarmono-color-switching-mode | read-write | optional | This object allows the user to view/change the color/mono switching mode for a device. Additional information: This object allows the user to view/change the c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.32 | Nodedevice-configure | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.32.19 | Scalardevice-configure-custom-product-number | read-only | optional | This object allows manufacturing to change the product number to a pre-defined alternate after release. This feature will allow manufacturing to assign unique … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.47 | Scalarcontrol-panel-button-press-delay | read-write | optional | This object gives the number of seconds to wait before simulating the button press when CONTROL-PANEL-BUTTON-PRESS is next called. Additional information: This… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.49 | Scalarlow-power | read-write | optional | Returns or changes the Auto Low Power sleep value. The device will go into energy saving Auto Low Power mode after the print engine has been idle for the numbe… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.73 | Scalarcontrol-panel-display-contrast | read-write | optional | This object returns or sets the display contrast setting if the control panel has a display and it supports contrast adjustment. The setting Is stored in NVRAM… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9 | NodenetPeripheral | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1 | NodenetPrinter | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1 | NodegeneralDeviceStatus | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.1 | ScalargdStatusBytes | read-only | current | The number of valid bytes in the gdStatusEntry array. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2 | NodegdStatusEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.1 | ScalargdStatusLineState | read-only | current | This describes the line state of the peripheral. When non-zero, the peripheral is off-line. When zero the peripheral is on-line. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.2 | ScalargdStatusPaperState | read-only | current | This describes the state of the paper on the peripheral. When non-zero, the peripheral has a paper problem. When zero, the peripheral does not have a paper pro… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.3 | ScalargdStatusInterventionState | read-only | current | This describes the intervention state of the peripheral. When non-zero, the peripheral requires human intervention to continue working. When zero, it requires … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.6 | ScalargdStatusPeripheralError | read-only | current | This is the error code from the peripheral. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.8 | ScalargdStatusPaperOut | read-only | current | This indicates that the peripheral is out of paper. off (0), paper-out-or-paper-mount (1), manual-paper-feed-needed (2) For some peripherals, such as the HP La… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.9 | ScalargdStatusPaperJam | read-only | current | This indicates that the peripheral has a paper jam. off (0), paper-jam(1) For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet plotter, … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.10 | ScalargdStatusTonerLow | read-only | current | This indicates that the peripheral has a low toner condition. off (0), toner-low (1), no-toner-cartridge (2) For some peripherals, such as the HP LaserJet IIIS… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.11 | ScalargdStatusPagePunt | read-only | current | This indicates that the peripheral did not receive data fast enough to keep up with the print engine when generating a page. For some peripherals, such as the … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.12 | ScalargdStatusMemoryOut | read-only | current | This indicates that the peripheral did not have enough memory to render an image on a page. For some peripherals, such as the HP LaserJet IIISi printer or HP D… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.13 | ScalargdStatusIoActive | read-only | current | This indicates that the peripheral is processing data from this I/O interface card. For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.14 | ScalargdStatusBusy | read-only | current | This indicates that the peripheral is busy processing print/plot data. For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet plotter, thi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.15 | ScalargdStatusWait | read-only | current | This indicates that the peripheral is waiting for print/plot data to process. For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet plott… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.16 | ScalargdStatusInitialize | read-only | current | This indicates that the peripheral is initializing or warming up. off (0), initializing (1), warm-up(2) For some peripherals, such as the HP LaserJet IIISi pri… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.17 | ScalargdStatusDoorOpen | read-only | current | This indicates that the peripheral cover or door is open. For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet plotter, this value is al… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.18 | ScalargdStatusPrinting | read-only | current | This indicates that the peripheral is printing or otherwise marking or moving paper. off (0), ordinary-page (1), test-fonts-config-or-start-page (2) For some p… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.19 | ScalargdStatusPaperOutput | read-only | current | This indicates that the peripheral has a paper output problem such as the output storage bin being full. off (0), output-storage-full (1) For some peripherals,… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.3 | ScalargdStatusDisplay | read-only | current | The string diplayed on the peripheral front panel. For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet plotter, this is always a zero l… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.7 | ScalargdStatusId | read-only | current | A formatted string of NVT ASCII charactersdescribing this peripheral. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.10 | ScalargdStatusJobTimeout | read-write | obsolete | |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.13 | ScalargdPasswords | read-write | current | This object is used as a 256 byte NVRAM area for JetAdmin. It is completely managed by JetAdmin. Initially it is initialized to all zeros. A coldboot will re-i… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2 | Nodesource-subsystem | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1 | Nodeio | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1 | Nodesettings-io | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.1 | Scalario-timeout | read-write | optional | The amount of time, in seconds, to wait for more print job data to be received before an I/O timeout occurs. The I/O channel being timed is the I/O channel tha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.2 | Scalario-switch | read-only | optional | Indicates if the device will switch between I/O channels when a job boundary is encountered and print job data is available on another I/O channel. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3 | Nodeprocessing-subsystem | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3 | Nodepdl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1 | Nodesettings-pdl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.4 | Scalardefault-copies | read-write | optional | Returns or changes default copies. Default copies is the default values used by the PDL to control the number of copies of each page in the print job that are … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.8 | Scalardefault-vertical-black-resolution | read-write | optional | Returns or changes the value of the default vertical black resolution. The units are dots per inch. Additional information: In the product, changing this OID a… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.9 | Scalardefault-horizontal-black-resolution | read-write | optional | Returns or changes the value of the default horizontal black resolution. The units are dots per inch. Additional information: In the product, changing this OID… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.11 | Scalardefault-lines-per-page | read-write | optional | Returns or changes the default number of lines per page. The POS indicates the supported values. An unsupported value causes the printer to use the closest sup… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.12 | Scalardefault-vmi | read-write | optional | Returns or changes the default vertical motion index. The unit of measure for VMI is centipoints per line. The POS indicates the supported values. An unsupport… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.13 | Scalardefault-media-size | read-write | optional | This indicates the default media size. A write of an unsupported value causes an <ErrorInvalidOrUnsupported Value>. Complete list of supported media sizes alon… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.19 | Scalarcold-reset-media-size | read-write | optional | Returns or sets the media size that is used as the DEFAULT-MEDIA-SIZE when a cold reset occurs. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.22 | Scalardefault-media-name | read-write | optional | Returns or sets the media name that is used until the media name is changed by a print job command. Additional information: This string must be one of the MEDI… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.36 | Scalarreprint | read-write | optional | Returns or changes the reprint (jam recovery) setting. If eOn, then the device will reprint pages jammed pages. If eOff, the device will not attempt to reprint… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.37 | Scalarwide-a4 | read-write | optional | Returns or changes the wide A4 logical page size setting. If eOn, then the margins/printable area of A4 paper will be changed to allow 80 10-pitch characters t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.38 | Scalardark-courier | read-write | optional | Returns or changes the dark Courier setting. If eOn, then the Courier font used will approximate the same darkness as the LaserJet III printer. If eOff, then t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.39 | Scalardefault-bits-per-pixel | read-write | optional | Controls the number of levels used (per pixel) when printing grayscale or color images. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3 | Nodepdl-pcl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.5 | Scalarpcl-total-page-count | read-write | optional | Total number of PCL pages printed by the device. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.13 | Scalarpcl-default-font-height | read-write | optional | Returns or changes the default PCL height. Height is an approximate measure of the body of the type in centipoints. A centipoint is 1/7200 inch. Height applies… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.14 | Scalarpcl-default-font-source | read-write | optional | Returns or changes the value of the default font source variable in NVRAM. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.15 | Scalarpcl-default-font-number | read-write | optional | Returns or changes the value of the default font number variable in NVRAM. Writing an unsupported value causes the printer to generate an <badValue>. Additiona… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.16 | Scalarpcl-default-font-width | read-write | optional | Returns or changes the default PCL font width. Width is expressed as the width of a character in centipoints. A centipoint is 1/7200 inch. Width applies only t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4 | Nodepdl-postscript | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.5 | Scalarpostscript-total-page-count | read-write | optional | Total number of PostScript pages printed by the device. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.11 | Scalarpostscript-print-errors | read-write | optional | Returns or changes the value of the print PostScript errors setting. If eOn, PostScript prints an error page showing the error encountered and the stack at the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.16 | Nodepdl-pclxl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.16.1 | Scalarpclxl-total-page-count | read-write | optional | Total number of PCLXL pages printed by the device. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.5 | Nodepjl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.5.1 | Scalarpjl-password | read-only | optional | Returns PJL password, if the password is not set (zero). If the password is set, then attempting to retrieve the password causes an <genErr> to occur and will … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4 | Nodedestination-subsystem | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1 | Nodeprint-engine | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1 | Nodesettings-prt-eng | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.5 | Scalarprint-density | read-write | optional | Returns or sets the print density setting. Print density is the instantaneous amount of marking agent applied to the paper while printing. A value of zero has … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.9 | Nodemarking-agent-density | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.18 | Scalarinvalid-personality-reports-enabled | read-write | optional | Read or configure wether invalid personality reports are enabled or disabled for a product. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.20 | Scalarcalibration-power-on-initiation | read-write | optional | This object determines when a power on calibration occurs. If eOn, then the calibration occurs immediately following boot. If eOff, then it never occurs. If eD… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.21 | Scalarcalibration-power-on-delay | read-write | optional | This is the delay interval for the power on calibration in minutes. This PML object is only used if the CALIBRATION-POWER-ON-INITIATION PML object is set to eD… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.22 | Scalarcalibration-pages-printed-initiation | read-write | optional | The number of pages that will be printed prior to an automatically initiated print calibration. If set to 0, it turns this calibration off. Additional informat… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.23 | Scalarcalibration-timer-initiation | read-write | optional | This is a timer in minutes that will be set in between calibrations. When the timer expires, a calibration will automatically be initiated. If set to 0, it tur… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.32 | Scalarcalibration-cpr-pages-printed-initiation | read-write | optional | The number of pages that will be printed prior to an automatically initiated CPR calibration. If set to 0, it turns this calibration off. Additional informatio… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2 | Nodestatus-prt-eng | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.5 | Scalartotal-engine-page-count | read-write | optional | Total number of pages printed by the device. POS indicates if the total engine page count is kept in NVRAM, and the maximum supported value before the page cou… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.6 | Scalartotal-mono-page-count | read-write | optional | Total number of black pages printed by the device. Additional information: Total number of mono pages printed by the device. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.7 | Scalartotal-color-page-count | read-write | optional | Total number of color pages printed by the device. Additional information: Total number of color pages printed by the device. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.22 | Scalarduplex-page-count | read-write | optional | Total number of sheets of media that have been duplex printed. A sheet is counted if it travels through the duplex page path, regardless of whether or not mark… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.26 | Scalarprint-engine-revision | read-only | optional | Print engine revision string. Additional information: Print engine revision string. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.34 | Scalarprint-engine-jam-count | read-write | optional | Total number of pages jammed in the print engine's life time. The POS indicates if the total jam count is kept in NVRAM and the maximum supported value before … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.35 | Scalarprint-engine-mispick-count | read-write | optional | Total number of pages mispicked in the print engine's life time. The POS indicates if the total mispick count is kept in NVRAM and the maximum supported value … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.49 | Scalarsupply-out-device-state | read-only | optional | This PML object indicates the current behavior of the device if one or more supplies have reached out. If no supply has reached out, the value of this PML obje… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3 | Nodeintray | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1 | Nodesettings-intray | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.7 | Scalarcustom-paper-dim-unit | read-write | optional | The units of measure used to specify the width and height of the printer's custom paper. The unit of measure of eTenThousandthsOfInches is 0.0001 inches. Addit… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.8 | Scalarcustom-paper-feed-dim | read-write | optional | Sets the printer's custom paper dimension in the feed direction (direction parallel to the direction of paper feeding). The value for this object is specified … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.9 | Scalarcustom-paper-xfeed-dim | read-write | optional | Sets the printer's custom paper dimension in the cross-feed direction (direction ninety degrees relative to the direction of paper feeding). The value for this… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3 | Nodeintrays | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1 | Nodeintray1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.1 | Scalartray1-media-size-loaded | read-write | optional | Returns the media size that is currently configuredconfigured in tray #1. This object can be set to indicate the media size currently loaded, if the printer su… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2 | Nodeintray2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.1 | Scalartray2-media-size-loaded | read-write | optional | Returns the media size that is currently configured in tray #2. Complete list of supported media sizes along with their dimensions are listed in the ''Media Si… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3 | Nodeintray3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3.1 | Scalartray3-media-size-loaded | read-write | optional | Returns the media size that is currently configured in tray #3. Complete list of supported media sizes along with their dimensions are listed in the ''Media Si… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.5 | Nodemarking-agent | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.5.1 | Nodesettings-marking-agent | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.5.1.11 | Scalarmarker-density-calibration | read-write | optional | Returns the calibration status or triggers a calibration cycle. All calibration procedures are used if set to eCalibrateALL. If set to eCalibrateColor then a f… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.6 | Nodeimaging | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.6.5 | Scalardefault-ret | read-write | optional | Returns or changes the Resolution Enhancement Technology setting. Devices that only support eOff and eOn should map all other values to eOn and always return t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8 | Nodeprint-media | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.1 | Nodesettings-print-media | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.1.1 | Scalarmedia-names-available | read-only | optional | The value of this object controls which of the MEDIAx-NAME objects are supported. If a bit is set to zero, then attempting to get or set the corresponding MEDI… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3 | Nodemedia-info | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.1 | Nodemedia1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.1.1 | Scalarmedia1-name | read-only | optional | Media 1 name. Additional information: The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.1.4 | Scalarmedia1-engine-media-mode | read-only | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: The eng… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.2 | Nodemedia2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.2.1 | Scalarmedia2-name | read-only | optional | Media 2 name. Additional information: The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.2.4 | Scalarmedia2-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.3 | Nodemedia3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.3.1 | Scalarmedia3-name | read-only | optional | Media 3 name. Additional information: The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.3.4 | Scalarmedia3-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.4 | Nodemedia4 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.4.1 | Scalarmedia4-name | read-only | optional | Media 4 name. Additional information: The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.4.4 | Scalarmedia4-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.5 | Nodemedia5 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.5.1 | Scalarmedia5-name | read-only | optional | Media 5 name. Additional information: The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.5.4 | Scalarmedia5-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.6 | Nodemedia6 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.6.1 | Scalarmedia6-name | read-only | optional | Media 6 name. Additional information: The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.6.4 | Scalarmedia6-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.7 | Nodemedia7 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.7.1 | Scalarmedia7-name | read-only | optional | Media 7 name. Additional information: The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.7.4 | Scalarmedia7-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.8 | Nodemedia8 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.8.1 | Scalarmedia8-name | read-only | optional | Media 8 name. Additional information: The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.8.4 | Scalarmedia8-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.9 | Nodemedia9 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.9.1 | Scalarmedia9-name | read-only | optional | Media 9 name. Additional information: The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.9.4 | Scalarmedia9-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.10 | Nodemedia10 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.10.1 | Scalarmedia10-name | read-only | optional | Media 10 name. Additional information: The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.10.4 | Scalarmedia10-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.11 | Nodemedia11 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.11.1 | Scalarmedia11-name | read-only | optional | Media 11 name. Additional information: The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.11.4 | Scalarmedia11-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.12 | Nodemedia12 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.12.1 | Scalarmedia12-name | read-only | optional | Media 12 name. Additional information: Raptor will have a default value of 'Light'. The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.12.4 | Scalarmedia12-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.13 | Nodemedia13 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.13.1 | Scalarmedia13-name | read-only | optional | Media 13 name. Additional information: Raptor will have a default value of 'Mid Weight' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.13.4 | Scalarmedia13-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.14 | Nodemedia14 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.14.1 | Scalarmedia14-name | read-only | optional | Media 14 name. Additional information: Raptor will have a default value of 'Heavy' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.14.4 | Scalarmedia14-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.15 | Nodemedia15 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.15.1 | Scalarmedia15-name | read-only | optional | Media 15 name. Additional information: Raptor will have a default value of 'Extra Heavy' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.15.4 | Scalarmedia15-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.16 | Nodemedia16 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.16.1 | Scalarmedia16-name | read-only | optional | Media 16 name. Additional information: Raptor will have a default value of 'Heavy Gloss' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.16.4 | Scalarmedia16-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.17 | Nodemedia17 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.17.1 | Scalarmedia17-name | read-only | optional | Media 17 name. Additional information: Raptor will have a default value of 'Extra Heavy Gloss' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.17.4 | Scalarmedia17-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.18 | Nodemedia18 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.18.1 | Scalarmedia18-name | read-only | optional | Media 18 name. Additional information: Raptor will have a default value of 'Card Glossy' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.18.4 | Scalarmedia18-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.19 | Nodemedia19 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.19.1 | Scalarmedia19-name | read-only | optional | Media 19 name. Additional information: Raptor will have a default value of 'Transparency' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.19.4 | Scalarmedia19-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.20 | Nodemedia20 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.20.1 | Scalarmedia20-name | read-only | optional | Media 20 name. Additional information: Raptor will have a default value of 'Labels' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.20.4 | Scalarmedia20-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.21 | Nodemedia21 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.21.1 | Scalarmedia21-name | read-only | optional | Media 21 name. Additional information: Raptor will have a default value of 'Letterhead' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.21.4 | Scalarmedia21-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.22 | Nodemedia22 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.22.1 | Scalarmedia22-name | read-only | optional | Media 22 name. Additional information: Raptor will have a default value of 'Envelope' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.22.4 | Scalarmedia22-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.23 | Nodemedia23 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.23.1 | Scalarmedia23-name | read-only | optional | Media 23 name. Additional information: Raptor will have a default value of 'Heavy Envelope' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.23.4 | Scalarmedia23-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.24 | Nodemedia24 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.24.1 | Scalarmedia24-name | read-only | optional | Media 24 name. Additional information: Raptor will have a default value of 'Preprinted' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.24.4 | Scalarmedia24-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.25 | Nodemedia25 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.25.1 | Scalarmedia25-name | read-only | optional | Media 25 name. Additional information: Raptor will have a default value of 'Prepunched' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.25.4 | Scalarmedia25-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.26 | Nodemedia26 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.26.1 | Scalarmedia26-name | read-only | optional | Media 26 name. Additional information: Raptor will have a default value of 'Color' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.26.4 | Scalarmedia26-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.27 | Nodemedia27 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.27.1 | Scalarmedia27-name | read-only | optional | Media 27 name. Additional information: Raptor will have a default value of 'Bond' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.27.4 | Scalarmedia27-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.28 | Nodemedia28 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.28.1 | Scalarmedia28-name | read-only | optional | Media 28 name. Additional information: Raptor will have a default value of 'Recycled' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.28.4 | Scalarmedia28-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.29 | Nodemedia29 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.29.1 | Scalarmedia29-name | read-only | optional | Media 29 name. Additional information: Raptor will have a default value of 'Rough' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.29.4 | Scalarmedia29-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.30 | Nodemedia30 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.30.1 | Scalarmedia30-name | read-only | optional | Media 30 name. Additional information: Raptor will have a default value of 'Heavy Rough' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.30.4 | Scalarmedia30-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.31 | Nodemedia31 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.31.1 | Scalarmedia31-name | read-only | optional | Media 31 name. Additional information: Raptor will have a default value of 'HP Tough Paper'. The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.31.4 | Scalarmedia31-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.4 | Nodemedia-modes | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.4.1 | Scalarengine-media-modes-supported1 | read-only | optional | The list of engine media modes supported by the device. The modes are each separated by a comma character. An example string would be: 'Normal,Rough,Low,Vellum… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.9 | Nodeprint-engine-test | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.9.94 | Scalarpe-test-abort-calibration | read-write | optional | Aborts all executing and scheduled calibrations if set to eTrue. Additional information: All scheduled caliberations will abort. Any currently executing calibr… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.9.111 | Scalarpe-test-cause-assert | write-only | optional | This object allows the user to cause a 49 Error. Additional information: This object allows the user to cause a 49 Error. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.9.116 | Scalarpe-test-cause-79error | write-only | optional | This object allows the user to cause a 79 Error. Additional information: This object allows the user to cause a 79 Error. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10 | Nodeconsumables | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.2 | Scalarconsumable-reorder-url | read-write | optional | This object is used to read and write the URL that can be used to reorder consumables for this device. This URL is set at the factory but can be updated by a r… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3 | Nodehrm | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2 | NodehrStorage | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.3 | NodehrStorageTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1 | NodehrStorageEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3 | NodehrDevice | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.2 | NodehrDeviceTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1 | NodehrDeviceEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.5 | NodehrPrinterTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.5.1 | NodehrPrinterEntry | |||
| 1.3.6.1.4.1.11.2.4 | Nodeinterface | |||
| 1.3.6.1.4.1.11.2.4.3 | NodenpCard | |||
| 1.3.6.1.4.1.11.2.4.3.1 | NodenpSys | |||
| 1.3.6.1.4.1.11.2.4.3.1.2 | ScalarnpSysStatusMessage | read-only | current | A status string reflecting the current state of the card and peripheral. |
| 1.3.6.1.4.1.11.2.4.3.1.10 | ScalarnpSysModelNumber | read-only | current | The HP model number of the device. |
| 1.3.6.1.4.1.11.2.4.3.1.11 | ScalarnpSysNetworkConnectors | read-only | current | This object describes the network connectors supported by the device. The value is a bit mask. A set bit indicates the connector is supported. Bit Value Connec… |
| 1.3.6.1.4.1.11.2.4.3.1.16 | ScalarnpSysCardServices1 | read-only | current | This object is a bitmap showing what services are available on the card. Bit 0 - IPX/SPX/NCP protocol stack Bit 1 - IP/TCP protocol stack Bit 2 - LLC/DLC proto… |
| 1.3.6.1.4.1.11.2.4.3.1.17 | ScalarnpSysCardServices2 | read-only | current | This object is a bitmap showing what services are available on the card. Bit 0 - XIP2 Bit 1 - PML Get/Set Bit 2 - PML Traps Bit 3 - Scan to Web Browser Bit 4 -… |
| 1.3.6.1.4.1.11.2.4.3.1.22 | ScalarnpSysCardServices3 | read-only | current | This object is a bitmap showing what services are available on the card. Bit 0 - 100T Bit 1 - Token Ring 802.5 Bit 2 - 802.11b Bit 3 - 80211.a Bit 4 - Bluetoot… |
| 1.3.6.1.4.1.11.2.4.3.4 | NodenpConns | |||
| 1.3.6.1.4.1.11.2.4.3.4.11 | ScalarnpConnsIP | read-only | current | Remote IP address of the node currently connected to the card. Zero if no connection is active. |
| 1.3.6.1.4.1.11.2.4.3.5 | NodenpCfg | |||
| 1.3.6.1.4.1.11.2.4.3.5.1 | ScalarnpCfgSource | read-write | current | This object indicates how the device obtained its IP configuration. |
| 1.3.6.1.4.1.11.2.4.3.5.2 | ScalarnpCfgYiaddr | read-write | current | The IP address assigned to the card from the BOOTP reply yiaddr field. |
| 1.3.6.1.4.1.11.2.4.3.5.12 | ScalarnpCfgSubnetMask | read-write | current | The subnet mask associated with the IP address of this card. |
| 1.3.6.1.4.1.11.2.4.3.5.13 | ScalarnpCfgDefaultGateway | read-write | current | This variable contains the IP address of the default router for this card. |
| 1.3.6.1.4.1.11.2.4.3.5.16 | ScalarnpCfgDomainName | read-write | current | The print server domain name. |
| 1.3.6.1.4.1.11.2.4.3.5.22 | ScalarnpCfgWINSNameServerIdPri | read-write | current | Primary name server for NetBIOS over TCP/IP. |
| 1.3.6.1.4.1.11.2.4.3.5.28 | ScalarnpCfgPasswd1Verify | read-write | current | Compares string value to passwd1 and returns OK if match, GENERAL ERROR if doesn't match. |
| 1.3.6.1.4.1.11.2.4.3.5.29 | ScalarnpCfgPasswd1 | read-write | current | Password for root or administrator. Get request returns either 'SET' or 'NOT_SET'. |
| 1.3.6.1.4.1.11.2.4.3.5.35 | ScalarnpCfgLinkType | read-write | current | Network link speed and communication mode. |
| 1.3.6.1.4.1.11.2.4.3.5.46 | ScalarnpCfgBonjourDomainName | read-only | current | The name used as the 'target name' in the DNS SRV records by Multicast Domain Name System (Bonjour). |
| 1.3.6.1.4.1.11.2.4.3.7 | NodenpCtl | |||
| 1.3.6.1.4.1.11.2.4.3.7.8 | ScalarnpCtlReconfig | read-write | current | Writing any value to this variable causes the card to reconfigure itself by doing the BOOTP/TFTP configuration activity. |
| 1.3.6.1.4.1.11.2.4.3.7.9 | ScalarnpCtlProtocolSet | read-write | current | This is a 4 byte integer value. The least significant bytes represent the protocols on the card. A value of '1' indicates a protocol that is enabled. A value o… |
| 1.3.6.1.4.1.11.2.4.3.7.27 | ScalarnpCtlSnmpVersionAccess | read-write | current | Manages an SNMP version's read and write access to the MIB. |
| 1.3.6.1.4.1.11.2.4.3.7.29 | ScalarnpCtlBonjour | read-write | current | Configure Multicast Domain Name Service. (0) = Bonjour disabled (1) = Bonjour enabled |
| 1.3.6.1.4.1.11.2.4.3.8 | NodenpNpi | |||
| 1.3.6.1.4.1.11.2.4.3.8.3 | NodenpNpiPeripheralAttributeEntry | |||
| 1.3.6.1.4.1.11.2.4.3.8.3.2 | ScalarnpNpiPaeClass | read-only | current | The class assigned to the peripheral onto which this card is plugged. |
| 1.3.6.1.4.1.11.2.4.3.8.3.3 | ScalarnpNpiPaeIdentification | read-only | current | The Identification number of the peripheral. These values are defined in the MIO spec. DesignJet, PaintJet XL300, and DesignJet/600 peripherals will identify t… |
| 1.3.6.1.4.1.11.2.4.3.8.4 | NodenpNpiCardAttributeEntry | |||
| 1.3.6.1.4.1.11.2.4.3.8.4.2 | ScalarnpNpiCaeClass | read-only | current | The class of this network peripheral card. |
| 1.3.6.1.4.1.11.2.4.3.13 | NodenpPort | |||
| 1.3.6.1.4.1.11.2.4.3.13.1 | ScalarnpPortNumPorts | read-only | current | The number of peripheral interfaces supported by this device. |
| 1.3.6.1.4.1.11.2.4.3.16 | NodenpDhcp | |||
| 1.3.6.1.4.1.11.2.4.3.16.2 | ScalarnpDHCPserver | read-only | current | IP address of DHCP server that provided this unit with an IP address via the DHCP protocol. |
| 1.3.6.1.4.1.11.2.15 | NodesnmpAccess | |||
| 1.3.6.1.4.1.11.2.15.1 | Nodecommunity | |||
| 1.3.6.1.4.1.11.2.15.1.1 | ScalarsetCommunityName | read-write | current | This object controls access of snmp read-write requests. Factory default configuration provides authentication of incoming packets with community names: intern… |
| 1.3.6.1.4.1.11.2.15.1.2 | ScalargetCommunityName | read-write | current | This object controls access of snmp read requests. Factory default configuration provides authentication of incoming packets with community names: internal and… |