LJ275-MIB
586 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3 | Nodeorg | |||
| 1.3.6 | Nodedod | |||
| 1.3.6.1 | Nodeinternet | |||
| 1.3.6.1.4 | Nodeprivate | |||
| 1.3.6.1.4.1 | Nodeenterprises | |||
| 1.3.6.1.4.1.11 | NodehpPrintServer | |||
| 1.3.6.1.4.1.11.2 | Nodenm | |||
| 1.3.6.1.4.1.11.2.3.9.4.2 | Nodedm | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1 | Nodedevice | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1 | Nodeiso | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1 | Nodesystem | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1 | Nodesettings-system | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.1 | Scalarenergy-star | read-only | optional | Returns or changes the Energy Star sleep value. If the value is greater than zero, then the device will go into energy saving sleep mode after the print engine… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.2 | Scalarsleep-mode | read-only | optional | Returns eTrue if the device is in energy saving sleep mode, otherwise returns eFalse. Setting SLEEP-MODE to eFalse causes the device to wake up, if it is in sl… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.9 | Scalarservice-password | write-only | optional | When set to the password value, other service related objects become 'visible' (i.e readable) or become writable. When written with any other value, the servic… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.24 | Scalarcopier-token | read-write | optional | Provides an advisory locking mechanism for hosts to coordinate exclusive access to a copier device. Setting the object to a unique id will only succeed if the … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.31 | Scalarmono-color-switching-mode | read-write | optional | This object allows the user to view/change the color/mono switching mode for a device. Additional information: This object allows the user to view/change the c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.32 | Nodedevice-configure | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.32.17 | Scalardevice-configure-secure-nvram-items | read-write | optional | This object is used to configure product settings that are stored in secure area of nvram. The object consists of a 16-bit variable in secure nvram. Bits 15-8 … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.32.19 | Scalardevice-configure-custom-product-number | read-only | optional | This object allows manufacturing to change the product number to a pre-defined alternate after release. This feature will allow manufacturing to assign unique … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.47 | Scalarcontrol-panel-button-press-delay | read-write | optional | This object gives the number of seconds to wait before simulating the button press when CONTROL-PANEL-BUTTON-PRESS is next called. Additional information: This… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.49 | Scalarlow-power | read-write | optional | Returns or changes the Auto Low Power sleep value. The device will go into energy saving Auto Low Power mode after the print engine has been idle for the numbe… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.73 | Scalarcontrol-panel-display-contrast | read-write | optional | This object returns or sets the display contrast setting if the control panel has a display and it supports contrast adjustment. The setting Is stored in NVRAM… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2 | Nodestatus-system | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.5 | Scalaron-off-line | read-only | optional | To bring the PDL processing sub-system on or off line. If the device is a printer, then the printer does not process print job data when the printer is off lin… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.6 | Scalarcontinue | write-only | optional | A device can support a class of errors called continuable errors. When a continuable error is encountered, the device requires a continue event to occur before… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.7 | Scalarauto-continue | read-write | optional | Indicates if the device will automatically continue after encountering a continuable error. If AUTO-CONTINUE is set to eOn, the device will automatically gener… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.8 | Scalarinstall-date | read-write | optional | Identifies the date that the device was installed. The format of the string is 'YYYYMMDDHHmmZ'. Where: YYYY is the year. MM is the month (1-12). DD is the day … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20 | Nodedisplay | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20.1 | Nodedisplay-status | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20.1.3 | Scalarshow-address | read-write | optional | If this object is set to eAuto, and the device has an IP address, the IP address of the device will be shown with the READY message. If this object is set to e… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.35 | Scalarjob-input-auto-continue-timeout | read-write | optional | The number of seconds the device waits after a job related continuable error occurs before automatically continuing. An example job related continuable error i… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.36 | Scalarjob-input-auto-continue-mode | read-write | optional | Returns or sets the device behavior when the desired media is not currently available. cCancelJob - The device cancels the job. The device POS should explain w… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.38 | Scalarerror-log-clear | write-only | optional | Setting this object clears all the entries in the error log sub-tree. Additional information: Setting this object removes all errors that have been stored in t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.60 | Scalarcontrol-panel-button-press | write-only | optional | Writing this object simulates pressing a button on the control panel. Reading it will return the last key pressed either on the control panel or via PML. The d… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.68 | Scalarclear-nvram | write-only | optional | Writing this object causes the specified NVRAM init option to be performed. Depending on the option, some (or all) of the permanent storage area will be comple… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.97 | Scalarship-cartridge-installed-in-printer | read-write | optional | Set developer motor cams in the position needed for shipping the cartridges installed in the printer if set to eTrue. Additional information: Notifies the engi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.120 | Scalardevice-mac-address | read-only | optional | The device's MAC address. Additional information: The device's MAC address. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.121 | Scalarextended-print-modes-modified | read-only | optional | This object allows the user to view whether the extended print modes have been modified from their default settings. Additional information: This object allows… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3 | Nodeid | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.1 | Scalarmodel-number | read-only | optional | Identifies the device model number as listed in the HP corporate price list (e.g. C2121A for DeskJet 500C). The string is as specific as possible. Products sho… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.2 | Scalarmodel-name | read-only | optional | Identifies the device model name (e.g. ''DeskJet 1200C''). The string is as specific as possible. Capitalization and spacing should match family naming convent… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.3 | Scalarserial-number | read-write | optional | Identifies the serial number for the device. If the SERIAL-NUMBER object is set by the user, then setting the object does not need to be protected. If the SERI… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.5 | Scalarfw-rom-datecode | read-only | optional | Identifies the base system firmware date code. The date code will be encoded in the yyyymmdd format. There may be several versions of the base system firmware.… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.10 | Scalardevice-name | read-write | optional | User defined device name. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as much as… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.12 | Scalarasset-number | read-write | optional | User defined asset number. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as much a… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5 | Nodetest | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.1 | Scalarself-test | read-write | optional | Writing this object allows a device self test to be started. Reading this object provides an indication what self-test is currently executing, if any. Actual s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.2 | Scalarprint-internal-page | read-write | optional | Writing this object to a value other than eNotPrintingAnInternalPage causes the device to attempt to print an internally generated page. Reading this object pr… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6 | Nodejob | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1 | Nodesettings-job | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.3 | Scalarjob-info-change-id | read-only | optional | Returns the current value of an object in the job-info sub-tree whose value has changed. Define the object identifier for the object whose value has changed as… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.2 | Nodeactive-print-jobs | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.2.1 | Nodejob-being-parsed | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.2.1.1 | Scalarcurrent-job-parsing-id | read-only | optional | Contains the printer assigned job identification for the job currently being processed by the processing PDL sub-system. The job ID is a monotonically increasi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9 | NodenetPeripheral | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1 | NodenetPrinter | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1 | NodegeneralDeviceStatus | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.1 | ScalargdStatusBytes | read-only | current | The number of valid bytes in the gdStatusEntry array. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2 | NodegdStatusEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.1 | ScalargdStatusLineState | read-only | current | This describes the line state of the peripheral. When non-zero, the peripheral is off-line. When zero the peripheral is on-line. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.2 | ScalargdStatusPaperState | read-only | current | This describes the state of the paper on the peripheral. When non-zero, the peripheral has a paper problem. When zero, the peripheral does not have a paper pro… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.3 | ScalargdStatusInterventionState | read-only | current | This describes the intervention state of the peripheral. When non-zero, the peripheral requires human intervention to continue working. When zero, it requires … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.6 | ScalargdStatusPeripheralError | read-only | current | This is the error code from the peripheral. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.8 | ScalargdStatusPaperOut | read-only | current | This indicates that the peripheral is out of paper. off (0), paper-out-or-paper-mount (1), manual-paper-feed-needed (2) For some peripherals, such as the HP La… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.9 | ScalargdStatusPaperJam | read-only | current | This indicates that the peripheral has a paper jam. off (0), paper-jam(1) For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet plotter, … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.10 | ScalargdStatusTonerLow | read-only | current | This indicates that the peripheral has a low toner condition. off (0), toner-low (1), no-toner-cartridge (2) For some peripherals, such as the HP LaserJet IIIS… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.11 | ScalargdStatusPagePunt | read-only | current | This indicates that the peripheral did not receive data fast enough to keep up with the print engine when generating a page. For some peripherals, such as the … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.12 | ScalargdStatusMemoryOut | read-only | current | This indicates that the peripheral did not have enough memory to render an image on a page. For some peripherals, such as the HP LaserJet IIISi printer or HP D… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.13 | ScalargdStatusIoActive | read-only | current | This indicates that the peripheral is processing data from this I/O interface card. For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.14 | ScalargdStatusBusy | read-only | current | This indicates that the peripheral is busy processing print/plot data. For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet plotter, thi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.15 | ScalargdStatusWait | read-only | current | This indicates that the peripheral is waiting for print/plot data to process. For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet plott… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.16 | ScalargdStatusInitialize | read-only | current | This indicates that the peripheral is initializing or warming up. off (0), initializing (1), warm-up(2) For some peripherals, such as the HP LaserJet IIISi pri… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.17 | ScalargdStatusDoorOpen | read-only | current | This indicates that the peripheral cover or door is open. For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet plotter, this value is al… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.18 | ScalargdStatusPrinting | read-only | current | This indicates that the peripheral is printing or otherwise marking or moving paper. off (0), ordinary-page (1), test-fonts-config-or-start-page (2) For some p… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2.19 | ScalargdStatusPaperOutput | read-only | current | This indicates that the peripheral has a paper output problem such as the output storage bin being full. off (0), output-storage-full (1) For some peripherals,… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.3 | ScalargdStatusDisplay | read-only | current | The string diplayed on the peripheral front panel. For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet plotter, this is always a zero l… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.7 | ScalargdStatusId | read-only | current | A formatted string of NVT ASCII charactersdescribing this peripheral. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.10 | ScalargdStatusJobTimeout | read-write | obsolete | |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.13 | ScalargdPasswords | read-write | current | This object is used as a 256 byte NVRAM area for JetAdmin. It is completely managed by JetAdmin. Initially it is initialized to all zeros. A coldboot will re-i… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11 | Nodeerrorlog | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1 | Nodeerror1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1.1 | Scalarerror1-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 1 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1.2 | Scalarerror1-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2 | Nodeerror2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2.1 | Scalarerror2-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 2 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2.2 | Scalarerror2-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3 | Nodeerror3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3.1 | Scalarerror3-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 3 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3.2 | Scalarerror3-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4 | Nodeerror4 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4.1 | Scalarerror4-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 4 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4.2 | Scalarerror4-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5 | Nodeerror5 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5.1 | Scalarerror5-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 5 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5.2 | Scalarerror5-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.6 | Nodeerror6 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.6.1 | Scalarerror6-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 6 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.6.2 | Scalarerror6-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.7 | Nodeerror7 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.7.1 | Scalarerror7-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 7 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.7.2 | Scalarerror7-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.8 | Nodeerror8 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.8.1 | Scalarerror8-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 8 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.8.2 | Scalarerror8-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.9 | Nodeerror9 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.9.1 | Scalarerror9-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 9 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.9.2 | Scalarerror9-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.10 | Nodeerror10 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.10.1 | Scalarerror10-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 10 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.10.2 | Scalarerror10-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.18 | Nodefirmware-download | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.18.7 | Scalarfirmware-download-version | read-only | optional | This object will return a string value representing the current revision of firmware that the printer is operating with. This is used to determine if code need… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2 | Nodesource-subsystem | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1 | Nodeio | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1 | Nodesettings-io | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.1 | Scalario-timeout | read-write | optional | The amount of time, in seconds, to wait for more print job data to be received before an I/O timeout occurs. The I/O channel being timed is the I/O channel tha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.2 | Scalario-switch | read-only | optional | Indicates if the device will switch between I/O channels when a job boundary is encountered and print job data is available on another I/O channel. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2 | Nodescanner | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1 | Nodesettings-scanner | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.43 | Scalarscanner-jam-page-count | read-write | optional | Indicates a count of the total pages jammed in the scanner'slifetime. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.49 | Scalarscanner-motor-control | write-only | optional | This objects is set to the number of steps that the scan motor should move. SERVICE-PASSWORD must be set correctly to use this object. Additional information: … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.52 | Scalarscan-control-descriptor | read-only | optional | Describes the control language and formats supported for this scanner. Additional information: This string is also used by Jetdirect Embedded WebScan |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.75 | Scalarscanner-modular-hardware | read-only | optional | Used to specify whether optional hardware is installed or not. Additional information: This HP LaserJet MFP uses this object to allow a host to query whether o… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.84 | Scalarscanner-clock-edge-modifiers | read-write | optional | This object accesses a table used by firmware to modify clock edge values for CCD scanner modules. Additional information: This object accesses a table used by… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.85 | Scalarscan-clock-edges | read-only | optional | Returns a table of clock edges used by the scanner. Additional information: Returns a table of clock edges used by the scanner. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.86 | Scalarscan-emulate-copy | read-write | optional | Setting this object to eYes will cause firmware to run the next scan job as if it were a copy job, using copy values for scanner h/w and image processing, and … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2 | Nodestatus-scanner | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.1 | Scalarnot-ready-source-scanner | read-only | optional | Indicates whether and why the scanner is not ready. A set bit indicates a problem. Additional information: ISSUES: Timberline only used cScannerFeederJam. Tahi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.8 | Scalarscanner-lamp-gain-value | read-only | optional | Provides PWM and analog gain for the color channels. The range will vary based on scan mode. The device specific POS should describe the valid range. The forma… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.9 | Scalarscanner-light-monitor-window | read-only | optional | Provides the pixel at which the LMW starts, as the ratio of the average LMW value to the six pixel average value. The device specific pos should specify the va… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.10 | Scalarscanner-reference-position | read-only | optional | Provides 3 pairs of x,y coordinates within a specified range of the calibrate reference position. The device specific POS should specify the valid ranges. The … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.11 | Scalarscanner-sensor-manufacturer | read-only | optional | Reports the scan sensor manufacturer. The device specific POS should list valid manufacturers. Additional information: Reports the scan sensor manufacturer. Th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.13 | Scalarcopy-scanner-dimensions | read-only | optional | This object is used to obtain the exact pixel scan dimensions for copy. The dimensions returned correspond to the quality, reduce/enlarge, and media size curre… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3 | Nodeprocessing-subsystem | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3 | Nodepdl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1 | Nodesettings-pdl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.4 | Scalardefault-copies | read-write | optional | Returns or changes default copies. Default copies is the default values used by the PDL to control the number of copies of each page in the print job that are … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.8 | Scalardefault-vertical-black-resolution | read-write | optional | Returns or changes the value of the default vertical black resolution. The units are dots per inch. Additional information: In the product, changing this OID a… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.9 | Scalardefault-horizontal-black-resolution | read-write | optional | Returns or changes the value of the default horizontal black resolution. The units are dots per inch. Additional information: In the product, changing this OID… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.11 | Scalardefault-lines-per-page | read-write | optional | Returns or changes the default number of lines per page. The POS indicates the supported values. An unsupported value causes the printer to use the closest sup… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.12 | Scalardefault-vmi | read-write | optional | Returns or changes the default vertical motion index. The unit of measure for VMI is centipoints per line. The POS indicates the supported values. An unsupport… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.13 | Scalardefault-media-size | read-write | optional | This indicates the default media size. A write of an unsupported value causes an <ErrorInvalidOrUnsupported Value>. Complete list of supported media sizes alon… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.19 | Scalarcold-reset-media-size | read-write | optional | Returns or sets the media size that is used as the DEFAULT-MEDIA-SIZE when a cold reset occurs. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.22 | Scalardefault-media-name | read-write | optional | Returns or sets the media name that is used until the media name is changed by a print job command. Additional information: This string must be one of the MEDI… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.36 | Scalarreprint | read-write | optional | Returns or changes the reprint (jam recovery) setting. If eOn, then the device will reprint pages jammed pages. If eOff, the device will not attempt to reprint… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.37 | Scalarwide-a4 | read-write | optional | Returns or changes the wide A4 logical page size setting. If eOn, then the margins/printable area of A4 paper will be changed to allow 80 10-pitch characters t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.38 | Scalardark-courier | read-write | optional | Returns or changes the dark Courier setting. If eOn, then the Courier font used will approximate the same darkness as the LaserJet III printer. If eOff, then t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.39 | Scalardefault-bits-per-pixel | read-write | optional | Controls the number of levels used (per pixel) when printing grayscale or color images. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3 | Nodepdl-pcl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.5 | Scalarpcl-total-page-count | read-write | optional | Total number of PCL pages printed by the device. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.13 | Scalarpcl-default-font-height | read-write | optional | Returns or changes the default PCL height. Height is an approximate measure of the body of the type in centipoints. A centipoint is 1/7200 inch. Height applies… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.14 | Scalarpcl-default-font-source | read-write | optional | Returns or changes the value of the default font source variable in NVRAM. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.15 | Scalarpcl-default-font-number | read-write | optional | Returns or changes the value of the default font number variable in NVRAM. Writing an unsupported value causes the printer to generate an <badValue>. Additiona… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.16 | Scalarpcl-default-font-width | read-write | optional | Returns or changes the default PCL font width. Width is expressed as the width of a character in centipoints. A centipoint is 1/7200 inch. Width applies only t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4 | Nodepdl-postscript | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.5 | Scalarpostscript-total-page-count | read-write | optional | Total number of PostScript pages printed by the device. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.11 | Scalarpostscript-print-errors | read-write | optional | Returns or changes the value of the print PostScript errors setting. If eOn, PostScript prints an error page showing the error encountered and the stack at the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.16 | Nodepdl-pclxl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.16.1 | Scalarpclxl-total-page-count | read-write | optional | Total number of PCLXL pages printed by the device. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.5 | Nodepjl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.5.1 | Scalarpjl-password | read-only | optional | Returns PJL password, if the password is not set (zero). If the password is set, then attempting to retrieve the password causes an <genErr> to occur and will … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4 | Nodedestination-subsystem | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1 | Nodeprint-engine | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1 | Nodesettings-prt-eng | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.5 | Scalarprint-density | read-write | optional | Returns or sets the print density setting. Print density is the instantaneous amount of marking agent applied to the paper while printing. A value of zero has … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.9 | Nodemarking-agent-density | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.9.1 | Scalarmarking-agent-density-setting | read-write | optional | Returns or sets the marking agent density setting for each of the marking agents installed. The Marking Agent (aka Print) density is the instantaneous amount o… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.9.2 | Scalarmarking-agent-highlights-density-setting | read-write | optional | Returns or sets the marking agent highlights density setting for each of the marking agents installed. The value of this object is in the range of -5..+5. The … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.9.3 | Scalarmarking-agent-midtones-density-setting | read-write | optional | Returns or sets the marking agent midtones density setting for each of the marking agents installed. The value of this object is in the range of -5..+5. See MA… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.9.4 | Scalarmarking-agent-shadows-density-setting | read-write | optional | Returns or sets the marking agent shadows density setting for each of the marking agents installed. The value of this object is in the range of -5..+5. See MAR… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.18 | Scalarinvalid-personality-reports-enabled | read-write | optional | Read or configure wether invalid personality reports are enabled or disabled for a product. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.20 | Scalarcalibration-power-on-initiation | read-write | optional | This object determines when a power on calibration occurs. If eOn, then the calibration occurs immediately following boot. If eOff, then it never occurs. If eD… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.21 | Scalarcalibration-power-on-delay | read-write | optional | This is the delay interval for the power on calibration in minutes. This PML object is only used if the CALIBRATION-POWER-ON-INITIATION PML object is set to eD… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.22 | Scalarcalibration-pages-printed-initiation | read-write | optional | The number of pages that will be printed prior to an automatically initiated print calibration. If set to 0, it turns this calibration off. Additional informat… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.23 | Scalarcalibration-timer-initiation | read-write | optional | This is a timer in minutes that will be set in between calibrations. When the timer expires, a calibration will automatically be initiated. If set to 0, it tur… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.32 | Scalarcalibration-cpr-pages-printed-initiation | read-write | optional | The number of pages that will be printed prior to an automatically initiated CPR calibration. If set to 0, it turns this calibration off. Additional informatio… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.38 | Scalarsupplies-at-very-low-setting | read-write | optional | This object can be used to change the setting of menu item AT VERY LOW. The behavior of the printer when a supply reaches low changes in accordance with the se… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2 | Nodestatus-prt-eng | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.5 | Scalartotal-engine-page-count | read-write | optional | Total number of pages printed by the device. POS indicates if the total engine page count is kept in NVRAM, and the maximum supported value before the page cou… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.6 | Scalartotal-mono-page-count | read-write | optional | Total number of black pages printed by the device. Additional information: Total number of mono pages printed by the device. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.7 | Scalartotal-color-page-count | read-write | optional | Total number of color pages printed by the device. Additional information: Total number of color pages printed by the device. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.26 | Scalarprint-engine-revision | read-only | optional | Print engine revision string. Additional information: Print engine revision string. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.34 | Scalarprint-engine-jam-count | read-write | optional | Total number of pages jammed in the print engine's life time. The POS indicates if the total jam count is kept in NVRAM and the maximum supported value before … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.35 | Scalarprint-engine-mispick-count | read-write | optional | Total number of pages mispicked in the print engine's life time. The POS indicates if the total mispick count is kept in NVRAM and the maximum supported value … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.49 | Scalarsupply-out-device-state | read-only | optional | This PML object indicates the current behavior of the device if one or more supplies have reached out. If no supply has reached out, the value of this PML obje… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3 | Nodeintray | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1 | Nodesettings-intray | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.7 | Scalarcustom-paper-dim-unit | read-write | optional | The units of measure used to specify the width and height of the printer's custom paper. The unit of measure of eTenThousandthsOfInches is 0.0001 inches. Addit… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.8 | Scalarcustom-paper-feed-dim | read-write | optional | Sets the printer's custom paper dimension in the feed direction (direction parallel to the direction of paper feeding). The value for this object is specified … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.9 | Scalarcustom-paper-xfeed-dim | read-write | optional | Sets the printer's custom paper dimension in the cross-feed direction (direction ninety degrees relative to the direction of paper feeding). The value for this… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3 | Nodeintrays | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1 | Nodeintray1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.1 | Scalartray1-media-size-loaded | read-write | optional | Returns the media size that is currently configuredconfigured in tray #1. This object can be set to indicate the media size currently loaded, if the printer su… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.5 | Nodemarking-agent | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.5.1 | Nodesettings-marking-agent | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.5.1.11 | Scalarmarker-density-calibration | read-write | optional | Returns the calibration status or triggers a calibration cycle. All calibration procedures are used if set to eCalibrateALL. If set to eCalibrateColor then a f… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.6 | Nodeimaging | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.6.5 | Scalardefault-ret | read-write | optional | Returns or changes the Resolution Enhancement Technology setting. Devices that only support eOff and eOn should map all other values to eOn and always return t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8 | Nodeprint-media | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.1 | Nodesettings-print-media | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.1.1 | Scalarmedia-names-available | read-only | optional | The value of this object controls which of the MEDIAx-NAME objects are supported. If a bit is set to zero, then attempting to get or set the corresponding MEDI… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3 | Nodemedia-info | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.1 | Nodemedia1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.1.1 | Scalarmedia1-name | read-only | optional | Media 1 name. Additional information: The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.1.4 | Scalarmedia1-engine-media-mode | read-only | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: The eng… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.2 | Nodemedia2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.2.1 | Scalarmedia2-name | read-only | optional | Media 2 name. Additional information: The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.2.4 | Scalarmedia2-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.3 | Nodemedia3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.3.1 | Scalarmedia3-name | read-only | optional | Media 3 name. Additional information: The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.3.4 | Scalarmedia3-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.4 | Nodemedia4 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.4.1 | Scalarmedia4-name | read-only | optional | Media 4 name. Additional information: The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.4.4 | Scalarmedia4-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.5 | Nodemedia5 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.5.1 | Scalarmedia5-name | read-only | optional | Media 5 name. Additional information: The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.5.4 | Scalarmedia5-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.6 | Nodemedia6 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.6.1 | Scalarmedia6-name | read-only | optional | Media 6 name. Additional information: The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.6.4 | Scalarmedia6-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.7 | Nodemedia7 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.7.1 | Scalarmedia7-name | read-only | optional | Media 7 name. Additional information: The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.7.4 | Scalarmedia7-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.8 | Nodemedia8 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.8.1 | Scalarmedia8-name | read-only | optional | Media 8 name. Additional information: The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.8.4 | Scalarmedia8-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.9 | Nodemedia9 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.9.1 | Scalarmedia9-name | read-only | optional | Media 9 name. Additional information: The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.9.4 | Scalarmedia9-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.10 | Nodemedia10 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.10.1 | Scalarmedia10-name | read-only | optional | Media 10 name. Additional information: The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.10.4 | Scalarmedia10-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.11 | Nodemedia11 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.11.1 | Scalarmedia11-name | read-only | optional | Media 11 name. Additional information: The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.11.4 | Scalarmedia11-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.12 | Nodemedia12 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.12.1 | Scalarmedia12-name | read-only | optional | Media 12 name. Additional information: Raptor will have a default value of 'Light'. The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.12.4 | Scalarmedia12-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.13 | Nodemedia13 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.13.1 | Scalarmedia13-name | read-only | optional | Media 13 name. Additional information: Raptor will have a default value of 'Mid Weight' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.13.4 | Scalarmedia13-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.14 | Nodemedia14 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.14.1 | Scalarmedia14-name | read-only | optional | Media 14 name. Additional information: Raptor will have a default value of 'Heavy' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.14.4 | Scalarmedia14-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.15 | Nodemedia15 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.15.1 | Scalarmedia15-name | read-only | optional | Media 15 name. Additional information: Raptor will have a default value of 'Extra Heavy' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.15.4 | Scalarmedia15-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.16 | Nodemedia16 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.16.1 | Scalarmedia16-name | read-only | optional | Media 16 name. Additional information: Raptor will have a default value of 'Heavy Gloss' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.16.4 | Scalarmedia16-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.17 | Nodemedia17 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.17.1 | Scalarmedia17-name | read-only | optional | Media 17 name. Additional information: Raptor will have a default value of 'Extra Heavy Gloss' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.17.4 | Scalarmedia17-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.18 | Nodemedia18 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.18.1 | Scalarmedia18-name | read-only | optional | Media 18 name. Additional information: Raptor will have a default value of 'Card Glossy' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.18.4 | Scalarmedia18-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.19 | Nodemedia19 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.19.1 | Scalarmedia19-name | read-only | optional | Media 19 name. Additional information: Raptor will have a default value of 'Transparency' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.19.4 | Scalarmedia19-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.20 | Nodemedia20 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.20.1 | Scalarmedia20-name | read-only | optional | Media 20 name. Additional information: Raptor will have a default value of 'Labels' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.20.4 | Scalarmedia20-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.21 | Nodemedia21 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.21.1 | Scalarmedia21-name | read-only | optional | Media 21 name. Additional information: Raptor will have a default value of 'Letterhead' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.21.4 | Scalarmedia21-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.22 | Nodemedia22 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.22.1 | Scalarmedia22-name | read-only | optional | Media 22 name. Additional information: Raptor will have a default value of 'Envelope' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.22.4 | Scalarmedia22-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.23 | Nodemedia23 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.23.1 | Scalarmedia23-name | read-only | optional | Media 23 name. Additional information: Raptor will have a default value of 'Heavy Envelope' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.23.4 | Scalarmedia23-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.24 | Nodemedia24 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.24.1 | Scalarmedia24-name | read-only | optional | Media 24 name. Additional information: Raptor will have a default value of 'Preprinted' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.24.4 | Scalarmedia24-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.25 | Nodemedia25 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.25.1 | Scalarmedia25-name | read-only | optional | Media 25 name. Additional information: Raptor will have a default value of 'Prepunched' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.25.4 | Scalarmedia25-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.26 | Nodemedia26 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.26.1 | Scalarmedia26-name | read-only | optional | Media 26 name. Additional information: Raptor will have a default value of 'Color' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.26.4 | Scalarmedia26-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.27 | Nodemedia27 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.27.1 | Scalarmedia27-name | read-only | optional | Media 27 name. Additional information: Raptor will have a default value of 'Bond' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.27.4 | Scalarmedia27-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.28 | Nodemedia28 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.28.1 | Scalarmedia28-name | read-only | optional | Media 28 name. Additional information: Raptor will have a default value of 'Recycled' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.28.4 | Scalarmedia28-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.29 | Nodemedia29 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.29.1 | Scalarmedia29-name | read-only | optional | Media 29 name. Additional information: Raptor will have a default value of 'Rough' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.29.4 | Scalarmedia29-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.30 | Nodemedia30 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.30.1 | Scalarmedia30-name | read-only | optional | Media 30 name. Additional information: Raptor will have a default value of 'Heavy Rough' The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.30.4 | Scalarmedia30-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.31 | Nodemedia31 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.31.1 | Scalarmedia31-name | read-only | optional | Media 31 name. Additional information: Raptor will have a default value of 'HP Tough Paper'. The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.31.4 | Scalarmedia31-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.32 | Nodemedia32 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.32.1 | Scalarmedia32-name | read-only | optional | Media 32 name. Additional information: Raptor does not have this media. The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.32.4 | Scalarmedia32-engine-media-mode | read-write | optional | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: Raptor … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.4 | Nodemedia-modes | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.4.1 | Scalarengine-media-modes-supported1 | read-only | optional | The list of engine media modes supported by the device. The modes are each separated by a comma character. An example string would be: 'Normal,Rough,Low,Vellum… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.9 | Nodeprint-engine-test | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.9.58 | Nodepe-test-scanner-configuration | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.9.58.6 | Scalarpe-test-scanner-test-config | write-only | optional | Configures the device for scanner test mode. Additional information: Configures the device for scanner test mode. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.9.94 | Scalarpe-test-abort-calibration | read-write | optional | Aborts all executing and scheduled calibrations if set to eTrue. Additional information: All scheduled caliberations will abort. Any currently executing calibr… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.9.111 | Scalarpe-test-cause-assert | write-only | optional | This object allows the user to cause a 49 Error. Additional information: This object allows the user to cause a 49 Error. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.9.116 | Scalarpe-test-cause-79error | write-only | optional | This object allows the user to cause a 79 Error. Additional information: This object allows the user to cause a 79 Error. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10 | Nodeconsumables | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.1 | Nodeconsumables-1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.1.1 | Nodeconsumable-status | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.1.1.3 | Scalarconsumable-status-serial-number | read-only | optional | This object is used to report the serial number for this consumable. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.1.1.40 | Scalarconsumable-status-authentication | read-only | optional | This object returns the authentication level of the elabel on the given supply. The elabel authentication is returned via the appropriate enum. Additional info… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.1.1.56 | Scalarconsumable-status-partnumber | read-only | optional | This object will have one sub-array for the consumable and will will hold the consumable's part number. Additional information: This object will have one sub-a… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.2 | Scalarconsumable-reorder-url | read-write | optional | This object is used to read and write the URL that can be used to reorder consumables for this device. This URL is set at the factory but can be updated by a r… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.5 | Nodeconsumables-status | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.5.1 | Nodeconsumables-life | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.5.1.1 | Scalarconsumable-life-usage-units-remaining | read-only | optional | This object reports the current estimate of the number of usage units that remain before this supply is depleted. An installed supply that cannot report such a… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.5.1.3 | Scalarconsumable-life-low-threshold | read-write | optional | This object is used to report and modify a threshold value indicating the point in the life of a consumable or supply at which a transition to a LOW state will… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.6 | Nodeconsumables-test | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.6.1 | Scalarconsumable-test-password | write-only | optional | When set with the correct integer password value this object is used to enable certain device specific test capabilities. When set with any incorrect integer v… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.7 | Scalarconsumable-current-state | read-only | optional | This PML object returns the current state of the particular consumable. cAuthLevel1 - Consumable is at Authentication Level 1 cAuthLevel2 - Consumable is at Au… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.11 | Scalarconsumable-pages-printed-with-supply | read-only | optional | This PML object returns the number of pages printed with a cartridge consumable. This PML object returns the value that should be displayed under 'Pages Printe… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5 | Nodecopier | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1 | Nodesettings-copier | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.2 | Scalarcopier-contrast | read-write | optional | Behaves as SCL's 'Set Scanner Contrast Level' command which is used for setting the copier contrast level. Range is 0..100. Additional information: Behaves as … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.4 | Scalarcopier-reduction | read-write | optional | Percentage reduction desired for the copier. A value less than or equal to zero is invalid. A value greater than 100 accomplishes magnification. A device is al… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.6 | Scalarcopier-num-copies | read-write | optional | Returns or changes the number of copies to be printed in the next Host requested copy operation. Additional information: Returns or changes the number of copie… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.7 | Scalarcopier-collation | read-write | optional | Enables the device with local copier capability that also supports outputting multiple copies of a multi-paged source document to print in a collated fashion. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.11 | Scalarcopier-enlargement-maximum | read-only | optional | Maximum value that the host may set COPIER-REDUCTION to. A value less than or equal to zero is invalid. Additional information: Maximum value that the host may… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.12 | Scalarcopier-reduction-maximum | read-only | optional | Minimum value that the host may set COPIER-REDUCTION to. A value less than or equal to zero is invalid. Additional information: Minimum value that the host may… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.13 | Scalarcopier-quality | read-write | optional | Returns or sets the copier quality. This value is stored in NVRAM, hence the value is saved over power cycles. Additional information: This value is stored in … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.20 | Scalarcopier-print-page-count | read-write | optional | This object tracks the page count for the pages sent to the print engine, for copy jobs. In order to write this object SERVICE-PASSWORD must be set correctly. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.21 | Scalarcopier-job-media-size | read-write | optional | The user can set a copy job setting for paper size using the COPIER-JOB-MEDIA-SIZE object, which is independent of other functions in the device. The device be… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.22 | Scalarcopier-job-quality | read-write | optional | Returns or sets the copier quality. Additional information: Returns or sets the copier quality. eCopierQualityFast is supported but gets mapped to normal. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.23 | Scalarcopier-job-collation | read-write | optional | Enables the device with local copier capability that also supports outputting multiple copies of a multi-paged source document to print in a collated fashion. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.24 | Scalarcopier-job-num-copies | read-write | optional | Returns or changes the number of copies to be printed in the next Host requested copy operation. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.25 | Scalarcopier-job-reduction | read-write | optional | Percentage reduction desired for the copier. A device is allowed to support a set of values (documented in its POS), instead of the full range. <OKNearesetLega… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.26 | Scalarcopier-job-contrast | read-write | optional | Used to set the copier contrast level. Additional information: Behaves as SCL's 'Set Scanner Contrast Level' command which is used for setting the copier contr… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.27 | Scalarcopier-job | read-write | optional | Controls initiating and canceling a copy job. Additional information: Controls initiating and canceling a copy job. eCopierIdle � indicates that a copy funct… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.44 | Scalarcopier-flatbed-page-count | read-write | optional | This object tracks the page count for the pages scanned for copying from the flatbed. In order to write this object SERVICE-PASSWORD must be set correctly. Add… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.45 | Scalarcopier-pages-per-sheet | read-write | optional | Returns or sets the copier number of input pages per output sheet. This is also known as nup. This value is stored in NVRAM, hence the value is saved over powe… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.46 | Scalarcopier-job-pages-per-sheet | read-write | optional | Returns or sets the copy value for how many input pages per output sheet. Additional information: Enables the device with local copier capability that also sup… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.47 | Scalarcopier-fit-to-page | read-write | optional | Returns or sets the copy setting for fit to page. This value is stored in NVRAM; hence, the value is saved over power cycles. Additional information: Enables t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.48 | Scalarcopier-job-fit-to-page | read-write | optional | Returns or sets the copy value for fit to page. Additional information: Enables the device with local copier capability to fit the input image size automatical… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.49 | Scalarcopier-pages-per-sheet-maximum | read-only | optional | Maximum pages per sheet value supported by the COPIER- PAGES-PER-SHEET and COPIER-JOB-PAGES-PER-SHEET objects. A value less than or equal to zero is invalid. A… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.64 | Scalarcopier-print-color-page-count | read-write | optional | This object tracks the page count for pages sent to the print engine for color copy jobs. This value is stored in the device NVRAM. Additional information: Thi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.70 | Scalarcopier-job-advanced-contrast | read-write | optional | Behaves as SCL's 'Set Scanner Contrast Level' command which is used for setting the copier contrast level. Contrast values can range from -127 to +127, for a t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.71 | Scalarcopier-advanced-contrast | read-write | optional | Behaves as SCL's 'Set Scanner Contrast Level' command which is used for setting the copier contrast level. Contrast values can range from -127 to +127, for a t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.72 | Scalarcopier-job-sharpen | read-write | optional | Behaves as SCL's 'Set Scanner Contrast Level' command which is used for setting the copier contrast level. Contrast values can range from -127 to +127, for a t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.73 | Scalarcopier-sharpen | read-write | optional | Behaves as SCL's 'Set Scanner Contrast Level' command which is used for setting the copier contrast level. Contrast values can range from -127 to +127, for a t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.74 | Scalarcopier-job-background-removal | read-write | optional | Behaves as SCL's 'Set Scanner Contrast Level' command which is used for setting the copier contrast level. Contrast values can range from -127 to +127, for a t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.75 | Scalarcopier-background-removal | read-write | optional | Behaves as SCL's 'Set Scanner Contrast Level' command which is used for setting the copier contrast level. Contrast values can range from -127 to +127, for a t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.76 | Scalarcopier-job-lightness | read-write | optional | Behaves as SCL's 'Set Scanner Contrast Level' command which is used for setting the copier contrast level. Contrast values can range from -127 to +127, for a t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.77 | Scalarcopier-lightness | read-write | optional | Behaves as SCL's 'Set Scanner Contrast Level' command which is used for setting the copier contrast level. Contrast values can range from -127 to +127, for a t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.78 | Scalarcopier-job-grayness | read-write | optional | Behaves as SCL's 'Set Scanner Contrast Level' command which is used for setting the copier contrast level. Contrast values can range from -127 to +127, for a t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.79 | Scalarcopier-grayness | read-write | optional | Behaves as SCL's 'Set Scanner Contrast Level' command which is used for setting the copier contrast level. Contrast values can range from -127 to +127, for a t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.80 | Scalarcopier-job-red-color-balance | read-write | optional | Behaves as SCL's 'Set Scanner Contrast Level' command which is used for setting the copier contrast level. Contrast values can range from -127 to +127, for a t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.81 | Scalarcopier-red-color-balance | read-write | optional | Behaves as SCL's 'Set Scanner Contrast Level' command which is used for setting the copier contrast level. Contrast values can range from -127 to +127, for a t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.82 | Scalarcopier-job-blue-color-balance | read-write | optional | Behaves as SCL's 'Set Scanner Contrast Level' command which is used for setting the copier contrast level. Contrast values can range from -127 to +127, for a t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.83 | Scalarcopier-blue-color-balance | read-write | optional | Behaves as SCL's 'Set Scanner Contrast Level' command which is used for setting the copier contrast level. Contrast values can range from -127 to +127, for a t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.84 | Scalarcopier-job-green-color-balance | read-write | optional | Behaves as SCL's 'Set Scanner Contrast Level' command which is used for setting the copier contrast level. Contrast values can range from -127 to +127, for a t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.85 | Scalarcopier-green-color-balance | read-write | optional | Behaves as SCL's 'Set Scanner Contrast Level' command which is used for setting the copier contrast level. Contrast values can range from -127 to +127, for a t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.86 | Scalarcopier-job-draft-mode | read-write | optional | Enables the device with local copier capability to turn on a draft printing mode. Additional information: Enables the device with local copier capability to tu… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.87 | Scalarcopier-draft-mode | read-write | optional | Enables the device with local copier capability to turn on a draft printing mode. Additional information: Enables the device with local copier capability to tu… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.88 | Scalarcopier-job-multipage | read-write | optional | Enables the device with local copier capability to turn on multi page copying from the flatbed. Additional information: Enables the device with local copier ca… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.89 | Scalarcopier-multipage | read-write | optional | Enables the device with local copier capability to turn on multi page copying from the flatbed. Additional information: Enables the device with local copier ca… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2 | Nodeprintmib | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5 | NodeprtGeneral | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1 | NodeprtGeneralTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1 | NodeprtGeneralEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.1 | ScalarprtGeneralConfigChanges | read-only | optional | Counts configuration changes that change the capabilities of a printer, such as the addition/deletion of input/output bins, the addition/deletion of interprete… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.2 | ScalarprtGeneralCurrentLocalization | read-write | optional | The value of the prtLocalizationIndex corresponding to the current language, country, and character set to be used for localized string values that are identif… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.3 | ScalarprtGeneralReset | read-write | optional | Setting this value to `powerCycleReset', `resetToNVRAM', or `resetToFactoryDefaults' will result in the resetting of the printer. When read, this object will a… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.4 | ScalarprtGeneralCurrentOperator | read-write | optional | The name of the person who is responsible for operating this printer. It is suggested that this string include information that would enable other humans to re… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.5 | ScalarprtGeneralServicePerson | read-write | optional | The name of the person responsible for servicing this printer. It is suggested that this string include information that would enable other humans to reach the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.6 | ScalarprtInputDefaultIndex | read-only | optional | The value of prtInputIndex corresponding to the default input sub-unit: that is, this object selects the default source of input media. This value shall be -1 … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.7 | ScalarprtOutputDefaultIndex | read-only | optional | The value of prtOutputIndex corresponding to the default output sub-unit; that is, this object selects the default output destination. This value shall be -1 i… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.8 | ScalarprtMarkerDefaultIndex | read-only | optional | The value of prtMarkerIndex corresponding to the default marker sub-unit; that is, this object selects the default marker. Additional information: The product … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.9 | ScalarprtMediaPathDefaultIndex | read-only | optional | The value of prtMediaPathIndex corresponding to the default media path; that is, the selection of the default media path. Additional information: The only vali… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.10 | ScalarprtConsoleLocalization | read-write | optional | The value of the prtLocalizationIndex corresponding to the language, country, and character set to be used for the console. This localization applies both to t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.11 | ScalarprtConsoleNumberOfDisplayLines | read-only | optional | The number of lines on the printer's physical display. This value is 0 if there are no lines on the physical display or if there is no physical display. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.12 | ScalarprtConsoleNumberOfDisplayChars | read-only | optional | The number of characters per line displayed on the physical display. This value is 0 if there are no lines on the physical display or if there is no physical d… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.13 | ScalarprtConsoleDisable | read-only | optional | If the object prtConsoleDisable has value 'operatorConsoleDisabled' then input is not accepted from the operator console. If the object prtConsoleDisable has t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.16 | ScalarprtGeneralPrinterName | read-write | optional | An administrator-specified name for this printer. Depending upon implementation of this printer, the value of this object may or may not be same as the value f… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.17 | ScalarprtGeneralSerialNumber | read-only | optional | A recorded serial number for this device that indexes some type device catalog or inventory. This value is usually set by the device manufacturer but the MIB s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.18 | ScalarprtAlertCriticalEvents | read-only | optional | A running counter of the number of critical alert events that have been recorded in the alert table. The value of this object is RESET in the event of a power … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.19 | ScalarprtAlertAllEvents | read-only | optional | A running counter of the total number of alert event entries (critical and non-critical) that have been recorded in the alert table Additional information: Thi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.2 | NodeprtStorageRefTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.2.1 | NodeprtStorageRefEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.2.1.2 | ScalarprtStorageRefIndex | read-only | optional | The value of the hrDeviceIndex of the printer device that this storageEntry is associated with. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.3 | NodeprtDeviceRefTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.3.1 | NodeprtDeviceRefEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.3.1.2 | ScalarprtDeviceRefIndex | read-only | optional | The value of the hrDeviceIndex of the printer device that this deviceEntry is associated with. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.6 | NodeprtCover | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.6.1 | NodeprtCoverTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.6.1.1 | NodeprtCoverEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.6.1.1.2 | ScalarprtCoverDescription | read-only | optional | The manufacturer provided cover sub-mechanism name in the localization specified by prtGeneralCurrentLocalization. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.6.1.1.3 | ScalarprtCoverStatus | read-only | optional | The status of this cover sub-unit. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.7 | NodeprtLocalization | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.7.1 | NodeprtLocalizationTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.7.1.1 | NodeprtLocalizationEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.7.1.1.2 | ScalarprtLocalizationLanguage | read-only | optional | A two character language code from ISO 639. Examples en, gb, ca, fr, de. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.7.1.1.3 | ScalarprtLocalizationCountry | read-only | optional | A two character country code from ISO 3166, a blank string (two space characters) shall indicate that the country is not defined. Examples: US, FR, DE, ... |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.7.1.1.4 | ScalarprtLocalizationCharacterSet | read-only | optional | The coded character set used for this localization. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8 | NodeprtInput | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2 | NodeprtInputTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1 | NodeprtInputEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.2 | ScalarprtInputType | read-only | optional | The type of technology (discriminated primarily according to feeder mechanism type) employed by the input sub-unit. Note, the Optional Input Class provides for… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.3 | ScalarprtInputDimUnit | read-only | optional | The unit of measurement for use calculating and relaying dimensional values for this input sub-unit. Additional information: Following is a table of paper size… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.4 | ScalarprtInputMediaDimFeedDirDeclared | read-only | optional | This object provides the value of the declared dimension, in the feed direction, of the media that is (or, if empty, was or will be) in this input sub-unit. Th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.5 | ScalarprtInputMediaDimXFeedDirDeclared | read-only | optional | This object provides the value of the declared dimension, in the cross feed direction, of the media that is (or, if empty, was or will be) in this input sub-un… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.6 | ScalarprtInputMediaDimFeedDirChosen | read-only | optional | The printer will act as if media of the chosen dimension (in the feed direction) is present in this input source. Note that this value will be used even if the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.7 | ScalarprtInputMediaDimXFeedDirChosen | read-only | optional | The printer will act as if media of the chosen dimension (in the cross feed direction) is present in this input source. Note that this value will be used even … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.8 | ScalarprtInputCapacityUnit | read-only | optional | The unit of measurement for use in calculating and relaying capacity values for this input sub-unit. Additional information: A sheet is a single piece of 20 po… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.9 | ScalarprtInputMaxCapacity | read-only | optional | The maximum capacity of the input sub-unit in input sub-unit capacity units (PrtCapacityUnitTC). There is no convention associated with the media itself so thi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.10 | ScalarprtInputCurrentLevel | read-only | optional | The current capacity of the input sub-unit in input sub-unit capacity units (PrtCapacityUnitTC). If this input sub-unit can reliably sense this value, the valu… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.11 | ScalarprtInputStatus | read-only | optional | The current status of this input sub-unit. Additional information: The default value assumes that media is loaded in the tray. When there is not media loaded i… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.12 | ScalarprtInputMediaName | read-write | optional | A description of the media contained in this input sub-unit; This description is intended for display to a human operator. This description is not processed by… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.13 | ScalarprtInputName | read-only | optional | The name assigned to this input sub-unit. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.14 | ScalarprtInputVendorName | read-only | optional | The vendor name of this input sub-unit. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.15 | ScalarprtInputModel | read-only | optional | The model name of this input sub-unit. Additional information: The product does not specify model names for the input trays. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.16 | ScalarprtInputVersion | read-only | optional | The version of this input sub-unit. Additional information: The product does not specify version numbers for the input trays. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.17 | ScalarprtInputSerialNumber | read-only | optional | The serial number assigned to this input sub-unit. Additional information: The product does not specify serial numbers for the input trays. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.18 | ScalarprtInputDescription | read-only | optional | A free-form text description of this input sub-unit in the localization specified by prtGeneralCurrentLocalization. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.19 | ScalarprtInputSecurity | read-only | optional | Indicates if this input sub-unit has some security associated with it. Additional information: No security mechanism provided. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9 | NodeprtOutput | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2 | NodeprtOutputTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1 | NodeprtOutputEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.2 | ScalarprtOutputType | read-only | optional | The type of technology supported by this output sub-unit. Additional information: The product has only one output bin, a face-down bin located at the top of th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.3 | ScalarprtOutputCapacityUnit | read-only | optional | The unit of measurement for use in calculating and relaying capacity values for this output sub-unit. Additional information: A sheet is a single piece of 20 p… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.4 | ScalarprtOutputMaxCapacity | read-only | optional | The maximum capacity of this output sub-unit in output sub-unit capacity units (PrtCapacityUnitTC). There is no convention associated with the media itself so … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.5 | ScalarprtOutputRemainingCapacity | read-only | optional | The remaining capacity of the possible output sub-unit capacity in output sub-unit capacity units (PrtCapacityUnitTC) of this output sub-unit. If this output s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.6 | ScalarprtOutputStatus | read-only | optional | The current status of this output sub-unit. Additional information: The product cannot sense the output tray so this object will always return 5 (Unknown Statu… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10 | NodeprtMarker | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2 | NodeprtMarkerTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1 | NodeprtMarkerEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.2 | ScalarprtMarkerMarkTech | read-only | optional | The type of marking technology used for this marking sub-unit. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.3 | ScalarprtMarkerCounterUnit | read-only | optional | The unit that will be used by the printer when reporting counter values for this marking sub-unit. The time units of measure are provided for a device like a s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.4 | ScalarprtMarkerLifeCount | read-only | optional | The count of the number of units of measure counted during the life of printer using units of measure as specified by prtMarkerCounterUnit. Additional informat… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.5 | ScalarprtMarkerPowerOnCount | read-only | optional | The count of the number of units of measure counted since the equipment was most recently powered on using units of measure as specified by prtMarkerCounterUni… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.6 | ScalarprtMarkerProcessColorants | read-only | optional | The number of process colors supported by this marker. A process color of 1 implies monochrome. The value of this object and prtMarkerSpotColorants cannot both… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.7 | ScalarprtMarkerSpotColorants | read-only | optional | The number of spot colors supported by this marker. The value of this object and prtMarkerProcessColorants cannot both be 0. Must be 0 or greater. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.8 | ScalarprtMarkerAddressabilityUnit | read-only | optional | The unit of measure of distances, as applied to the marker's resolution. Additional information: This will always be ePtenThousandthsOfInches, no matter what C… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.9 | ScalarprtMarkerAddressabilityFeedDir | read-only | optional | The maximum number of addressable marking positions in the feed direction per 10000 units of measure specified by prtMarkerAddressabilityUnit. A value of (-1) … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.10 | ScalarprtMarkerAddressabilityXFeedDir | read-only | optional | The maximum number of addressable marking positions in the cross feed direction in 10000 units of measure specified by prtMarkerAddressabilityUnit. A value of … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.11 | ScalarprtMarkerNorthMargin | read-only | optional | The margin, in units identified by prtMarkerAddressabilityUnit, from the leading edge of the medium as the medium flows through the marking engine with the sid… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.12 | ScalarprtMarkerSouthMargin | read-only | optional | The margin from the South edge (see prtMarkerNorthMargin) of the medium in units identified by prtMarkerAddressabilityUnit. Printing within the area bounded by… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.13 | ScalarprtMarkerWestMargin | read-only | optional | The margin from the West edge (see prtMarkerNorthMargin) of the medium in units identified by prtMarkerAddressabilityUnit. Printing within the area bounded by … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.14 | ScalarprtMarkerEastMargin | read-only | optional | The margin from the East edge (see prtMarkerNorthMargin) of the medium in units identified by prtMarkerAddressabilityUnit. Printing within the area bounded by … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.15 | ScalarprtMarkerStatus | read-only | optional | The current status of this marker sub-unit. Additional information: The default value assumes the printer is idle and has no malfunctions. Default - 0 (Availab… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11 | NodeprtMarkerSupplies | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1 | NodeprtMarkerSuppliesTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1 | NodeprtMarkerSuppliesEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.2 | ScalarprtMarkerSuppliesMarkerIndex | read-only | optional | The value of prtMarkerIndex corresponding to the marking sub-unit with which this marker supply sub-unit is associated. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.3 | ScalarprtMarkerSuppliesColorantIndex | read-only | optional | The value of prtMarkerColorantIndex corresponding to the colorant with which this marker supply sub-unit is associated. This value shall be 0 if there is no co… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.4 | ScalarprtMarkerSuppliesClass | read-only | optional | Indicates whether this supply entity represents a supply that is consumed or a receptacle that is filled. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.5 | ScalarprtMarkerSuppliesType | read-only | optional | The type of this supply. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.6 | ScalarprtMarkerSuppliesDescription | read-only | optional | The description of this supply container/receptacle in the localization specified by prtGeneralCurrentLocalization. Additional information: Raptor will have a … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.7 | ScalarprtMarkerSuppliesSupplyUnit | read-only | optional | Unit of measure of this marker supply container/receptacle. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.8 | ScalarprtMarkerSuppliesMaxCapacity | read-only | optional | The maximum capacity of this supply container/receptacle expressed in prtMarkerSuppliesSupplyUnit. If this supply container/receptacle can reliably sense this … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.9 | ScalarprtMarkerSuppliesLevel | read-only | optional | The current level if this supply is a container; the remaining space if this supply is a receptacle. If this supply container/receptacle can reliably sense thi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.12 | NodeprtMarkerColorant | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.12.1 | NodeprtMarkerColorantTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.12.1.1 | NodeprtMarkerColorantEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.12.1.1.2 | ScalarprtMarkerColorantMarkerIndex | read-only | optional | The value of prtMarkerIndex corresponding to the marker sub-unit with which this colorant entry is associated. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.12.1.1.3 | ScalarprtMarkerColorantRole | read-only | optional | The role played by this colorant. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.12.1.1.4 | ScalarprtMarkerColorantValue | read-only | optional | The name of the color of this colorant using standardized string names from ISO 10175 (DPA) and ISO 10180 (SPDL) which are: other unknown white red green blue … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.12.1.1.5 | ScalarprtMarkerColorantTonality | read-only | optional | The distinct levels of tonality realizable by a marking sub-unit when using this colorant. This value does not include the number of levels of tonal difference… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13 | NodeprtMediaPath | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4 | NodeprtMediaPathTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1 | NodeprtMediaPathEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.2 | ScalarprtMediaPathMaxSpeedPrintUnit | read-only | optional | The unit of measure used in specifying the speed of all media paths in the printer. Additional information: ePimpressionsPerHour is the value that will always … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.3 | ScalarprtMediaPathMediaSizeUnit | read-only | optional | The units of measure of media size for use in calculating and relaying dimensional values for all media paths in the printer. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.4 | ScalarprtMediaPathMaxSpeed | read-only | optional | The maximum printing speed of this media path expressed in prtMediaPathMaxSpeedUnit's. A value of (-1) implies 'other'. Additional information: The page size f… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.5 | ScalarprtMediaPathMaxMediaFeedDir | read-only | optional | The maximum physical media size in the feed direction of this media path expressed in units of measure specified by PrtMediaPathMediaSizeUnit. A value of (-1) … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.6 | ScalarprtMediaPathMaxMediaXFeedDir | read-only | optional | The maximum physical media size across the feed direction of this media path expressed in units of measure specified by prtMediaPathMediaSizeUnit. A value of (… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.7 | ScalarprtMediaPathMinMediaFeedDir | read-only | optional | The minimum physical media size in the feed direction of this media path expressed in units of measure specified by prtMediaPathMediaSizeUnit. A value of (-2) … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.8 | ScalarprtMediaPathMinMediaXFeedDir | read-only | optional | The minimum physical media size across the feed direction of this media path expressed in units of measure specified by prtMediaPathMediaSizeUnit. A value of (… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.9 | ScalarprtMediaPathType | read-only | optional | The type of the media path for this media path. Additional information: This object describes how many paths there are through the engine disregarding the pape… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.10 | ScalarprtMediaPathDescription | read-only | optional | The manufacturer-provided description of this media path in the localization specified by prtGeneralCurrentLocalization. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.11 | ScalarprtMediaPathStatus | read-only | optional | The current status of this media path. Additional information: The default values assume the printer is idle. Default - 0 (Available and Idle) paper motion - 6… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15 | NodeprtInterpreter | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1 | NodeprtInterpreterTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1 | NodeprtInterpreterEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.2 | ScalarprtInterpreterLangFamily | read-only | optional | The family name of a Page Description Language (PDL) or control language which this interpreter in the printer can interpret or emulate. Additional information… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.3 | ScalarprtInterpreterLangLevel | read-only | optional | The level of the language which this interpreter is interpreting or emulating. This might contain a value like '5e' for an interpreter which is emulating level… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.4 | ScalarprtInterpreterLangVersion | read-only | optional | The date code or version of the language which this interpreter is interpreting or emulating. Additional information: These values are derived from the dateCod… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.5 | ScalarprtInterpreterDescription | read-only | optional | A string to identify this interpreter in the localization specified by prtGeneralCurrentLocalization as opposed to the language which is being interpreted. It … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.6 | ScalarprtInterpreterVersion | read-only | optional | The date code, version number, or other product specific information tied to this interpreter. This value is associated with the interpreter, rather than with … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.7 | ScalarprtInterpreterDefaultOrientation | read-write | optional | The current orientation default for this interpreter. This value may be overridden for a particular job (e.g., by a command in the input data stream). Addition… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.8 | ScalarprtInterpreterFeedAddressability | read-only | optional | The maximum interpreter addressability in the feed direction in 10000 prtMarkerAddressabilityUnits (see prtMarkerAddressabilityFeedDir ) for this interpreter. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.9 | ScalarprtInterpreterXFeedAddressability | read-only | optional | The maximum interpreter addressability in the cross feed direction in 10000 prtMarkerAddressabilityUnits (see prtMarkerAddressabilityXFeedDir) for this interpr… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.10 | ScalarprtInterpreterDefaultCharSetIn | read-write | optional | The default coded character set for input octets encountered outside a context in which the Page Description Language established the interpretation of the oct… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.11 | ScalarprtInterpreterDefaultCharSetOut | read-only | optional | The default character set for data coming from this interpreter through the printer's output channel (i.e. the 'backchannel'). This value shall be (2) if there… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.12 | ScalarprtInterpreterTwoWay | read-only | optional | Indicates whether or not this interpreter returns information back to the host. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.16 | NodeprtConsoleDisplayBuffer | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.16.5 | NodeprtConsoleDisplayBufferTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.16.5.1 | NodeprtConsoleDisplayBufferEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.16.5.1.2 | ScalarprtConsoleDisplayBufferText | read-only | optional | The content of a line in the logical display buffer of the operator's console of the printer. When a write operation occurs, normally a critical message, to on… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.17 | NodeprtConsoleLights | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.17.6 | NodeprtConsoleLightTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.17.6.1 | NodeprtConsoleLightEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.17.6.1.2 | ScalarprtConsoleOnTime | read-only | optional | This object, in conjunction with prtConsoleOffTime, defines the current status of the light. If both prtConsoleOnTime and prtConsoleOffTime are non-zero, the l… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.17.6.1.3 | ScalarprtConsoleOffTime | read-only | optional | This object, in conjunction with prtConsoleOnTime, defines the current status of the light. If both prtConsoleOnTime and prtConsoleOffTime are non-zero, the la… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.17.6.1.4 | ScalarprtConsoleColor | read-only | optional | The color of this light. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.17.6.1.5 | ScalarprtConsoleDescription | read-only | optional | The vendor description or label of this light in the localization specified by prtConsoleLocalization. |
| 1.3.6.1.4.1.11.2.3.9.4.2.3 | Nodehrm | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2 | NodehrStorage | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.2 | ScalarhrMemorySize | read-only | mandatory | The amount of physical main memory contained by the host. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: The unit of measure … |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.3 | NodehrStorageTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1 | NodehrStorageEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1.1 | ScalarhrStorageIndex | read-only | mandatory | A unique value for each logical storage area contained by the host. Refer to RFC 1514, Host Resources MIB, for more details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1.2 | ScalarhrStorageType | read-only | mandatory | The type of storage represented by this entry. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: The object is constant for the … |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1.3 | ScalarhrStorageDescr | read-only | mandatory | A description of the type and instance of the storage described by this entry. Refer to RFC 1514, Host Resources MIB, for more details. Additional information:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1.4 | ScalarhrStorageAllocationUnits | read-only | mandatory | The size, in bytes, of the data objects allocated from this pool. If this entry is monitoring sectors, blocks, buffers, or packets, for example, this number wi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1.5 | ScalarhrStorageSize | read-only | mandatory | The size of the storage represented by this entry, in units of hrStorageAllocationUnits. Refer to RFC 1514, Host Resources MIB, for more details. Additional in… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1.6 | ScalarhrStorageUsed | read-only | mandatory | The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits. Refer to RFC 1514, Host Resources MIB, for more de… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3 | NodehrDevice | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.2 | NodehrDeviceTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1 | NodehrDeviceEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.1 | ScalarhrDeviceIndex | read-only | mandatory | A unique value for each device contained by the host. The value for each device must remain constant at least from one re-initialization of the agent to the ne… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.2 | ScalarhrDeviceType | read-only | mandatory | An indication of the type of device. If this value is `hrDeviceProcessor { hrDeviceTypes 3 }' then an entry exists in the hrProcessorTable which corresponds to… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.3 | ScalarhrDeviceDescr | read-only | mandatory | A textual description of this device, including the device's manufacturer and revision, and optionally, its serial number. Refer to RFC 1514, Host Resources MI… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.4 | ScalarhrDeviceID | read-only | mandatory | The product ID for this device. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: The DEFAULT for Kiwi is {kiwi} and the complet… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.5 | ScalarhrDeviceStatus | read-only | mandatory | The current operational state of the device described by this row of the table. A value unknown(1) indicates that the current state of the device is unknown. r… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.6 | ScalarhrDeviceErrors | read-only | mandatory | The number of errors detected on this device. It should be noted that as this object has a SYNTAX of Counter, that it does not have a defined initial value. Ho… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.5 | NodehrPrinterTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.5.1 | NodehrPrinterEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.5.1.1 | ScalarhrPrinterStatus | read-only | mandatory | The current status of this printer device. When in the idle(1), printing(2), or warmup(3) state, the corresponding hrDeviceStatus should be running(2) or warni… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.5.1.2 | ScalarhrPrinterDetectedErrorState | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.4 | Nodeinterface | |||
| 1.3.6.1.4.1.11.2.4.1 | Nodesimm | |||
| 1.3.6.1.4.1.11.2.4.1.1 | Nodesimm1 | |||
| 1.3.6.1.4.1.11.2.4.1.1.4 | Scalarsimm1-type | read-only | optional | Returns an indication of the type of option installed in SIMM slot 1. eEmpty means the device did not detect any option installed in the interface slot. eUnkno… |
| 1.3.6.1.4.1.11.2.4.1.1.5 | Scalarsimm1-capacity | read-only | optional | Returns an indication of the capacity of the SIMM installed in SIMM slot 1. The capacity is dependent on the type of option, as indicated by the SIMM1-TYPE obj… |
| 1.3.6.1.4.1.11.2.4.3 | NodenpCard | |||
| 1.3.6.1.4.1.11.2.4.3.1 | NodenpSys | |||
| 1.3.6.1.4.1.11.2.4.3.1.2 | ScalarnpSysStatusMessage | read-only | current | A status string reflecting the current state of the card and peripheral. |
| 1.3.6.1.4.1.11.2.4.3.1.10 | ScalarnpSysModelNumber | read-only | current | The HP model number of the device. |
| 1.3.6.1.4.1.11.2.4.3.1.11 | ScalarnpSysNetworkConnectors | read-only | current | This object describes the network connectors supported by the device. The value is a bit mask. A set bit indicates the connector is supported. Bit Value Connec… |
| 1.3.6.1.4.1.11.2.4.3.1.16 | ScalarnpSysCardServices1 | read-only | current | This object is a bitmap showing what services are available on the card. Bit 0 - IPX/SPX/NCP protocol stack Bit 1 - IP/TCP protocol stack Bit 2 - LLC/DLC proto… |
| 1.3.6.1.4.1.11.2.4.3.1.17 | ScalarnpSysCardServices2 | read-only | current | This object is a bitmap showing what services are available on the card. Bit 0 - XIP2 Bit 1 - PML Get/Set Bit 2 - PML Traps Bit 3 - Scan to Web Browser Bit 4 -… |
| 1.3.6.1.4.1.11.2.4.3.1.22 | ScalarnpSysCardServices3 | read-only | current | This object is a bitmap showing what services are available on the card. Bit 0 - 100T Bit 1 - Token Ring 802.5 Bit 2 - 802.11b Bit 3 - 80211.a Bit 4 - Bluetoot… |
| 1.3.6.1.4.1.11.2.4.3.4 | NodenpConns | |||
| 1.3.6.1.4.1.11.2.4.3.4.11 | ScalarnpConnsIP | read-only | current | Remote IP address of the node currently connected to the card. Zero if no connection is active. |
| 1.3.6.1.4.1.11.2.4.3.5 | NodenpCfg | |||
| 1.3.6.1.4.1.11.2.4.3.5.1 | ScalarnpCfgSource | read-write | current | This object indicates how the device obtained its IP configuration. |
| 1.3.6.1.4.1.11.2.4.3.5.2 | ScalarnpCfgYiaddr | read-write | current | The IP address assigned to the card from the BOOTP reply yiaddr field. |
| 1.3.6.1.4.1.11.2.4.3.5.12 | ScalarnpCfgSubnetMask | read-write | current | The subnet mask associated with the IP address of this card. |
| 1.3.6.1.4.1.11.2.4.3.5.13 | ScalarnpCfgDefaultGateway | read-write | current | This variable contains the IP address of the default router for this card. |
| 1.3.6.1.4.1.11.2.4.3.5.16 | ScalarnpCfgDomainName | read-write | current | The print server domain name. |
| 1.3.6.1.4.1.11.2.4.3.5.22 | ScalarnpCfgWINSNameServerIdPri | read-write | current | Primary name server for NetBIOS over TCP/IP. |
| 1.3.6.1.4.1.11.2.4.3.5.28 | ScalarnpCfgPasswd1Verify | read-write | current | Compares string value to passwd1 and returns OK if match, GENERAL ERROR if doesn't match. |
| 1.3.6.1.4.1.11.2.4.3.5.29 | ScalarnpCfgPasswd1 | read-write | current | Password for root or administrator. Get request returns either 'SET' or 'NOT_SET'. |
| 1.3.6.1.4.1.11.2.4.3.5.35 | ScalarnpCfgLinkType | read-write | current | Network link speed and communication mode. |
| 1.3.6.1.4.1.11.2.4.3.5.46 | ScalarnpCfgBonjourDomainName | read-only | current | The name used as the 'target name' in the DNS SRV records by Multicast Domain Name System (Bonjour). |
| 1.3.6.1.4.1.11.2.4.3.5.49 | ScalarnpCfgIPv6DomainName | read-write | current | IPv6 Domain Name. |
| 1.3.6.1.4.1.11.2.4.3.7 | NodenpCtl | |||
| 1.3.6.1.4.1.11.2.4.3.7.8 | ScalarnpCtlReconfig | read-write | current | Writing any value to this variable causes the card to reconfigure itself by doing the BOOTP/TFTP configuration activity. |
| 1.3.6.1.4.1.11.2.4.3.7.9 | ScalarnpCtlProtocolSet | read-write | current | This is a 4 byte integer value. The least significant bytes represent the protocols on the card. A value of '1' indicates a protocol that is enabled. A value o… |
| 1.3.6.1.4.1.11.2.4.3.7.27 | ScalarnpCtlSnmpVersionAccess | read-write | current | Manages an SNMP version's read and write access to the MIB. |
| 1.3.6.1.4.1.11.2.4.3.7.29 | ScalarnpCtlBonjour | read-write | current | Configure Multicast Domain Name Service. (0) = Bonjour disabled (1) = Bonjour enabled |
| 1.3.6.1.4.1.11.2.4.3.7.32 | ScalarnpCtlNetworkConnectionMode | read-write | current | This object controls the selection of the active network interface used for communication. This is applicable to products supporting dual wired and wireless ne… |
| 1.3.6.1.4.1.11.2.4.3.7.38 | ScalarnpCtlLLMNR | read-write | current | Link-Local Multicast Name Resolution( LLMNR ) enable/disable. |
| 1.3.6.1.4.1.11.2.4.3.8 | NodenpNpi | |||
| 1.3.6.1.4.1.11.2.4.3.8.3 | NodenpNpiPeripheralAttributeEntry | |||
| 1.3.6.1.4.1.11.2.4.3.8.3.2 | ScalarnpNpiPaeClass | read-only | current | The class assigned to the peripheral onto which this card is plugged. |
| 1.3.6.1.4.1.11.2.4.3.8.3.3 | ScalarnpNpiPaeIdentification | read-only | current | The Identification number of the peripheral. These values are defined in the MIO spec. DesignJet, PaintJet XL300, and DesignJet/600 peripherals will identify t… |
| 1.3.6.1.4.1.11.2.4.3.8.4 | NodenpNpiCardAttributeEntry | |||
| 1.3.6.1.4.1.11.2.4.3.8.4.2 | ScalarnpNpiCaeClass | read-only | current | The class of this network peripheral card. |
| 1.3.6.1.4.1.11.2.4.3.13 | NodenpPort | |||
| 1.3.6.1.4.1.11.2.4.3.13.1 | ScalarnpPortNumPorts | read-only | current | The number of peripheral interfaces supported by this device. |
| 1.3.6.1.4.1.11.2.4.3.15 | TablenpCRCTable | not-accessible | current | |
| 1.3.6.1.4.1.11.2.4.3.15.1 | RownpCRCEntry | not-accessible | current | |
| 1.3.6.1.4.1.11.2.4.3.15.1.1 | ColumnnpCRCIndex | read-only | current | |
| 1.3.6.1.4.1.11.2.4.3.15.1.2 | ColumnnpCRCText | read-only | current | |
| 1.3.6.1.4.1.11.2.4.3.15.1.3 | ColumnnpCRCChannel | read-only | current | |
| 1.3.6.1.4.1.11.2.4.3.16 | NodenpDhcp | |||
| 1.3.6.1.4.1.11.2.4.3.16.2 | ScalarnpDHCPserver | read-only | current | IP address of DHCP server that provided this unit with an IP address via the DHCP protocol. |
| 1.3.6.1.4.1.11.2.4.9 | Nodeusb-interface | |||
| 1.3.6.1.4.1.11.2.4.9.2 | Nodeusb | |||
| 1.3.6.1.4.1.11.2.4.9.2.5 | Scalarusb-product-id | read-only | optional | Returns the Product ID of a connected USB device as defined in the Standard Device Descriptor of the Universal Serial Bus Specification Version 2.0. The value … |
| 1.3.6.1.4.1.11.2.15 | NodesnmpAccess | |||
| 1.3.6.1.4.1.11.2.15.1 | Nodecommunity | |||
| 1.3.6.1.4.1.11.2.15.1.1 | ScalarsetCommunityName | read-write | current | This object controls access of snmp read-write requests. Factory default configuration provides authentication of incoming packets with community names: intern… |
| 1.3.6.1.4.1.11.2.15.1.2 | ScalargetCommunityName | read-write | current | This object controls access of snmp read requests. Factory default configuration provides authentication of incoming packets with community names: internal and… |