LJ3015-MIB
857 objects
No module-level DESCRIPTION found.
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11 | Nodehp | |||
| 1.3.6.1.4.1.11.2.3.9.4.2 | Nodedm | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1 | Nodedevice | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1 | Nodedevice-system | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1 | Nodesettings-system | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.1 | Scalarenergy-star | read-write | optional | Returns or changes the Energy Star sleep value. If the value is greater than zero, then the device will go into energy saving sleep mode after the print engine… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.2 | Scalarsleep-mode | read-write | optional | Returns eTrue if the device is in energy saving sleep mode, otherwise returns eFalse. Setting SLEEP-MODE to eFalse causes the device to wake up, if it is in sl… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.22 | Scalardate-display | read-write | optional | Controls front-panel date display format. Additional information: Controls front-panel date display format. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.32 | Nodedevice-configure | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.32.12 | Scalardevice-configure-printer-parameters | read-write | optional | Allow the printer to be configured as a duplex or simplex printer. There will be a <<hidden>> encoded in this string and decoded by the printer firmware. If th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.32.15 | Scalardevice-configure-quiet-mode-printing | read-write | optional | Return or set the value of the quiet mode setting. Additional information: Return or set the value of the quiet mode setting. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.43 | Scalardirect-connect-ports-enable | read-write | optional | This object specifies whether all direct connect ports (parallel and USB) are available or ignored. JetDirect, embedded network connectivity, and third party a… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.75 | Scalarremote-upgrade-version-checking-enable | read-write | mandatory | Enables the ability to consume incoming engine RFU jobs without performing an upgrade when the firmware version number specified in the RFU header matches the … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.99 | Scalarstart-engine-early-warmup | write-only | mandatory | This PML object is used by HP SW drivers to signal the printer that a job is coming, and to start the warm-up process early.The effect of warming up early will… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.101 | Scalarenable-engine-early-warmup | read-only | optional | This PML object is used by HP SW to enable/disable the printer to send the signal of warm-up process early to engine. The effect of warming up early will reduc… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2 | Nodestatus-system | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.5 | Scalaron-off-line | read-write | optional | To bring the PDL processing sub-system on or off line. If the device is a printer, then the printer does not process print job data when the printer is off lin… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.6 | Scalarcontinue | write-only | optional | A device can support a class of errors called continuable errors. When a continuable error is encountered, the device requires a continue event to occur before… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.7 | Scalarauto-continue | read-write | optional | Indicates if the device will automatically continue after encountering a continuable error. If AUTO-CONTINUE is set to eOn, the device will automatically gener… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.8 | Scalarinstall-date | read-write | optional | Identifies the date that the device was installed. The format of the string is 'YYYYMMDDHHmmZ'. Where: YYYY is the year. MM is the month (1-12). DD is the day … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.10 | Scalarperm-store-init-occurred | read-only | optional | This object will set the cAllPermDevices bit when a full perm storage initialization occurs (as would be the case for a brand new device-system or as a result … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.17 | Scalardate-and-time | read-write | optional | A C structure containing the following fields: typedef struct { ubyte yr; /* year: 0 to 99 */ ubyte mon; /* month: 1 to 12 */ ubyte day; /* day: 1 to 31 */ uby… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.19 | Scalarservice-id | read-write | optional | A read of this object will return the current SERVICE ID value in the printer. The format is 'YYDDD' where: YY = calendar year - 1990 DDD = (calendar month - 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20 | Nodedisplay | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20.1 | Nodedisplay-status | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20.1.3 | Scalarshow-address | read-write | optional | If this object is set to eAuto, and the device has an IP address, the IP address of the device will be shown with the READY message. If this object is set to e… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.28 | Scalartime-display | read-write | optional | Controls front-panel time display format. Set to eTimeDisplayTwelveHour for AM/PM display. Set to eTimeDisplayTwentyFourHour for military-type display. Additio… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.35 | Scalarjob-input-auto-continue-timeout | read-write | optional | The number of seconds the device waits after a job related continuable error occurs before automatically continuing. An example job related continuable error i… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.36 | Scalarjob-input-auto-continue-mode | read-write | optional | Returns or sets the device behavior when the desired media is not currently available. cCancelJob - The device cancels the job. The device POS should explain w… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37 | Nodebackground-message | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37.1 | Nodebackground-message1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37.1.1 | Scalarbackground-status-msg-line1-part1 | read-write | optional | The string displayed on the device's front panel in place of the printer's built-in background status string. An example built-in background status string is '… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37.2 | Nodebackground-message2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37.2.1 | Scalarbackground-status-msg-line2-part1 | read-write | optional | The string displayed on the device's front panel in place of the printer's built-in background status string. An example built-in background status string is '… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37.5 | Scalarbackground-status-msg-higher-priority | read-write | optional | The string displayed on the device's front panel in place of the printer's built-in background status string. It would alternate with warning messages and woul… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.38 | Scalarerror-log-clear | write-only | optional | Setting this object clears all the entries in the error log sub-tree. Additional information: Setting this object removes all errors that have been stored in t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.40 | Scalarjob-output-auto-continue-timeout | read-write | optional | Returns or sets the time that the printer will wait after an output bin becomes full and the printer is trying to deliver a sheet of media to that output bin. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.42 | Scalarcollated-originals-support | read-only | optional | Indicates that the printer can create multiple, collated 'originals' of a job and shows the level of support for this capability. cCollatedOriginals - The prin… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.52 | Scalarlocalization-languages-supported | read-only | optional | The list of languages supported by the device. The languages are primarily, but not limited to, two character codes from ISO 639, each separated by a comma cha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.53 | Scalarlocalization-countries-supported | read-only | optional | The list of countries supported by the device. The countries are primarily, but not limited to, two character codes from ISO 3166, each separated by a comma ch… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.59 | Scalarhost-application-available-memory | read-only | optional | Returns the amount of memory, in bytes, that the device has available for job-related processing or resources. Also known as driver work space (DWS) memory. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.63 | Scalarcontrol-panel-display-contents-change-counter | read-only | optional | A counter which increments whenever the contents of the front panel display changes. This object is implemented as a 32-bit signed integer which rolls over to … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.64 | Scalarcontrol-panel-display-contents-crc | read-only | optional | Reading this object returns a 32-bit Cyclical Redundancy Check (CRC) which represents the current contents of the display. Additional information: This object … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.65 | Nodecontrol-panel-display | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.65.1 | Scalarcontrol-panel-display-graphical-contents | read-only | optional | Reading this object returns a graphical file format image representing the current pixel content of the display. The device POS will specify the expected scree… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.66 | Scalarcontrol-panel-key-press | read-write | optional | Writing this object simulates pressing a key on the control panel. Reading it will return the last key pressed either on the control panel or via PML. This obj… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.97 | Scalarship-cartridge-installed-in-printer | read-write | optional | Set developer motor cams in the position needed for shipping the cartridges installed in the printer if set to eTrue. Additional information: Set the engine to… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.99 | Scalarrtc-time-zone | read-write | optional | Controls the time zone, which can be chosen from a list of time zones similar to the one used by Microsoft Windows operating system: eTzDateline -12:00 Interna… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.100 | Scalarautomatic-daylight-savings | read-write | optional | Determines whether or not the automatic adjustment for daylight savings time is enabled. If it's enabled the device local time will be automatically adjusted f… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.101 | Scalardaylight-savings-start | read-write | optional | A C structure containing the following fields: typedef struct { ubyte hour; /* hour: 0 to 23 */ ubyte weekday; /* weekday: 0(Sunday) to 6 */ ubyte occurrence; … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.102 | Scalardaylight-savings-end | read-write | optional | A C structure containing the following fields: typedef struct { ubyte hour; /* hour: 0 to 23 */ ubyte weekday; /* weekday: 0(Sunday) to 6 */ ubyte occurrence; … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.103 | Scalardaylight-savings-offset | read-write | optional | Controls the offset in minutes to be added to the time when DST is in effect. Additional information: Controls the offset in minutes to be added to the time wh… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.104 | Scalardaylight-savings-reset | read-write | optional | This object is used to reset (set back to factory default for the current time zone) or read the current status of the DST settings. When Set to eResetToDefaul… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.116 | Scalardfa-data-in-nvram | read-write | optional | This object will act as a Read/Write area for HP print application to facilitate the new Design for Attach Data and Product Warranty Extension efforts. This ob… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3 | Nodeid | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.1 | Scalarmodel-number | read-only | optional | Identifies the device model number as listed in the HP corporate price list (e.g. C2121A for DeskJet 500C). The string is as specific as possible. Products sho… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.2 | Scalarmodel-name | read-only | optional | Identifies the device model name (e.g. ''DeskJet 1200C''). The string is as specific as possible. Capitalization and spacing should match family naming convent… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.3 | Scalarserial-number | read-only | optional | Identifies the serial number for the device. If the SERIAL-NUMBER object is set by the user, then setting the object does not need to be protected. If the SERI… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.5 | Scalarfw-rom-datecode | read-only | optional | Identifies the base device-system firmware date code. The date code will be encoded in the yyyymmdd format. There may be several versions of the base device-sy… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.6 | Scalarfw-rom-revision | read-only | optional | This identifies the device-system code firmware ROM revision code. The format for a revision is major_revision.minor_revision. There may be other ROM revision … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.10 | Scalardevice-name | read-write | optional | User defined device name. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as much as… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.11 | Scalardevice-location | read-write | optional | User defined device location. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as muc… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.12 | Scalarasset-number | read-write | optional | User defined asset number. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as much a… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.13 | Scalarsystem-contact | read-write | optional | User defined string containing the name of the person or group that is responsible for the device. The POS should indicate the maximum supported string length.… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.20 | Scalarformatter-serial-number | read-only | optional | This object returns the formatter serial number for the device. The value returned from this object is the FORMATTERNUMBER system variable. If possible, encode… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.22 | Scalarcompany-name | read-write | optional | The maximum supported string length is 32 characters. If the user entered string is too long, the device will store the first 32 characters and will return the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4 | Nodeinterface | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1 | Nodesimm | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.1 | Nodesimm1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.1.4 | Scalarsimm1-type | read-only | optional | Returns an indication of the type of option installed in SIMM slot 1. eEmpty means the device did not detect any option installed in the interface slot. eUnkno… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.1.5 | Scalarsimm1-capacity | read-only | optional | Returns an indication of the capacity of the SIMM installed in SIMM slot 1. The capacity is dependent on the type of option, as indicated by the SIMM1-TYPE obj… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.1.6 | Nodesimm1-bank | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.1.6.1 | Nodesimm1-bank1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.1.6.1.1 | Scalarsimm1-bank1-type | read-only | optional | Returns an indication of the type of option installed in Bank 1 of SIMM slot 1. See SIMM1-TYPE for a description. Additional information: This object is used f… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.1.6.1.2 | Scalarsimm1-bank1-capacity | read-only | optional | Returns an indication of the capacity of Bank 1 of the SIMM installed in SIMM slot 1. See SIMM1-CAPACITY for a description. Additional information: Returns an … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.1.6.2 | Nodesimm1-bank2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.1.6.2.1 | Scalarsimm1-bank2-type | read-only | optional | Returns an indication of the type of option installed in Bank 2 of SIMM slot 1. See SIMM1-TYPE for a description. Additional information: This object is used f… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.1.6.2.2 | Scalarsimm1-bank2-capacity | read-only | optional | Returns an indication of the capacity of Bank 2 of the SIMM installed in SIMM slot 1. See SIMM1-CAPACITY for a description. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.2 | Nodesimm2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.2.4 | Scalarsimm2-type | read-only | optional | Returns an indication of the type of option installed in SIMM slot 2. See SIMM1-TYPE for a description. Additional information: This object is used for describ… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.2.5 | Scalarsimm2-capacity | read-only | optional | Returns an indication of the capacity of the SIMM installed in SIMM slot 2. See SIMM1-CAPACITY for a description. Additional information: This object is used f… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.2.6 | Nodesimm2-bank | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.2.6.1 | Nodesimm2-bank1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.2.6.1.1 | Scalarsimm2-bank1-type | read-only | optional | Returns an indication of the type of option installed in Bank 1 of SIMM slot 2. See SIMM1-TYPE for a description. Additional information: This object is used f… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.2.6.1.2 | Scalarsimm2-bank1-capacity | read-only | optional | Returns an indication of the capacity of Bank 1 of the SIMM installed in SIMM slot 2. See SIMM1-CAPACITY for a description. Additional information: Returns an … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.2.6.2 | Nodesimm2-bank2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.2.6.2.1 | Scalarsimm2-bank2-type | read-only | optional | Returns an indication of the type of option installed in Bank 2 of SIMM slot 2. See SIMM1-TYPE for a description. Additional information: This object is used f… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.2.6.2.2 | Scalarsimm2-bank2-capacity | read-only | optional | Returns an indication of the capacity of Bank 2 of the SIMM installed in SIMM slot 2. See SIMM1-CAPACITY for a description. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3 | Nodemio | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.1 | Nodemio1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.1.2 | Scalarmio1-model-name | read-only | optional | Returns product information identifying the I/O card. Example: XXXX. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.1.3 | Scalarmio1-manufacturing-info | read-only | optional | Returns information describing the manufacture of the I/O card installed in MIO/EIO slot 1. May include serial number and firmware revision. Additional informa… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.1.4 | Scalarmio1-type | read-only | optional | Returns an indication of the type of option installed in MIO/EIO slot 1. See SIMM1-TYPE for an explanation of the enumerations. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.1.6 | Scalarmio1-ip-address | read-only | optional | This object will return the IP Address of the I/O cards present in the available slots of a printer. Laserjet 4700 MFP supports 2 slots and a Embedded Jet Dire… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.4 | Nodemio4 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.4.2 | Scalarmio4-model-name | read-only | optional | Returns product information identifying the I/O card. Example: XXXX. Additional information: Returns a string describing the firmware version of the embedded J… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.4.3 | Scalarmio4-manufacturing-info | read-only | optional | Returns information describing the manufacture of the I/O card installed in MIO/EIO interface 4. May include serial number and firmware revision. Additional in… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.4.4 | Scalarmio4-type | read-only | optional | Returns an indication of the type of option installed in MIO/EIO interface 4. See SIMM1-TYPE for an explanation of the enumerations. Additional information: Re… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.4.6 | Scalarmio4-ip-address | read-only | optional | This object will return the IP Address of the I/O cards present in the available slots of a printer. Laserjet 4700 MFP supports 2 slots and a Embedded Jet Dire… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.6 | Nodeweb-server | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.6.1 | Nodesettings-web-server | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.6.1.5 | Scalarews-request-control-panel-supplies-status | read-write | optional | System variable EWS_REQUEST_CONTROL_PANEL_SUPPPLIES_STATUS requires a PML interface so that WJA can directly access it without needing EWS support for that. Ad… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9 | Nodeusb-interface | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9.1 | Scalarusb-host-supported | read-only | optional | The USB Host protocol is supported by the device when the value returned is eTrue. The USB Host protocol is not supported when the value returned is eFalse. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9.2 | Nodeusb | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9.2.1 | Scalarusb-serial-number | read-only | optional | Returns the serial number of a connected USB device as defined in the Standard Device Descriptor of the Universal Serial Bus Specification Version 2.0. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9.2.2 | Scalarusb-manufacturer-name | read-only | optional | Returns the description of the manufacturer of a connected USB device as defined in the Standard Device Descriptor of the Universal Serial Bus Specification Ve… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9.2.3 | Scalarusb-product-description | read-only | optional | Returns the product description of a connected USB device as defined in the Standard Device Descriptor of the Universal Serial Bus Specification Version 2.0. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9.2.4 | Scalarusb-vendor-id | read-only | optional | Returns the Vendor ID of a connected USB device as defined in the Standard Device Descriptor of the Universal Serial Bus Specification Version 2.0. The value w… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9.2.5 | Scalarusb-product-id | read-only | optional | Returns the Product ID of a connected USB device as defined in the Standard Device Descriptor of the Universal Serial Bus Specification Version 2.0. The value … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9.2.6 | Scalarusb-device-kind | read-only | optional | The USB-DEVICE-KIND object classifies a USB device into one of four broad categories: \ eUSBStorageDevice(1): The USB device is strictly a device for storing d… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9.2.7 | Scalarusb-driver-name | read-only | optional | Returns the name of the low-level USB driver supporting this device. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6 | Nodejob | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1 | Nodesettings-job | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.1 | Scalarclearable-warning | read-write | optional | Returns or controls how the device will track clearable warnings. A clearable warning indicates a transient event in the device. The device will continue after… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.2 | Scalarcancel-job | write-only | optional | Cancels the print job whose ID matches the value written to the CANCEL-JOB object. The host first learns the job ID using the CURRENT-JOB-PARSING-ID command. I… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.3 | Scalarjob-info-change-id | read-only | optional | Returns the current value of an object in the job-info sub-tree whose value has changed. Define the object identifier for the object whose value has changed as… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.10 | Scalarhold-job-timeout | read-write | optional | The time, in minutes, that the printer will wait before automatically deleting a held job. This allows the printer to automatically clean up jobs that have bee… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.2 | Nodeactive-print-jobs | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.2.1 | Nodejob-being-parsed | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.2.1.1 | Scalarcurrent-job-parsing-id | read-only | optional | Contains the printer assigned job identification for the job currently being processed by the processing PDL sub-system. The job ID is a monotonically increasi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5 | Nodejob-info | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.1 | Scalarjob-info-name1 | read-only | optional | Contains the first part of this print job's name. The last OID field for this dynamic object contains the job ID. Additional information: The job name is the s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.2 | Scalarjob-info-name2 | read-only | optional | Contains the second part of this print job's name. The last OID field for this dynamic object contains the job ID. Additional information: See job-info-name1. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.10 | Scalarjob-info-stage | read-only | optional | Indicates what printer sub-systems are currently processing this print job. The last OID field for this dynamic object contains the job ID. cSourceSubsystem - … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.11 | Scalarjob-info-io-source | read-only | optional | Indicates which I/O source, the print job was received over. The value maps to port numbering scheme supported in the DEVICE/SOURCE-SUBSYSTEM/IO/PORTS sub-tree. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.12 | Scalarjob-info-pages-processed | read-only | optional | Indicates the number of pages processed by the processing subsystem. If neither the cSourceSubsystem or the cProcessingSubsystem items are in the associated JO… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.13 | Scalarjob-info-pages-printed | read-only | optional | Indicates the number of pages printed by the destination subsystem. If none of the cSourceSubsystem, cProcessingSubsystem or cDestinationSubsystem items are in… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.14 | Scalarjob-info-size | read-only | optional | Indicates the number of bytes of data processed by the processing subsystem. If neither of the cSourceSubsystem or cProcessingSubsystem items are in the associ… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.15 | Scalarjob-info-state | read-only | optional | Indicates the state of the job. The last OID field for this dynamic object contains the job ID. eAborted - the print job was aborted. eWaitingForResources - th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.19 | Scalarjob-info-outcome | read-only | optional | Indicates if any warning or error conditions were encountered while processing the assoicated job. The last OID field for this dynamic object contains the job … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.20 | Scalarjob-info-outbins-used | read-only | optional | Indicates which output bins this job has delivered printed pages to. The last OID field for this dynamic object contains the job ID. Additional information: Th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.22 | Scalarjob-info-physical-outbins-used | read-only | optional | Indicates which physical output bins this job has delivered printed pages to. The last OID field for this dynamic object contains the job ID. Additional inform… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23 | Nodejob-info-attribute | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.1 | Scalarjob-info-attr-1 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. Attribute objects are saved sequentially, starting with 1, after the start of a job. If mor… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.2 | Scalarjob-info-attr-2 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.3 | Scalarjob-info-attr-3 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.4 | Scalarjob-info-attr-4 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.5 | Scalarjob-info-attr-5 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.6 | Scalarjob-info-attr-6 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.7 | Scalarjob-info-attr-7 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.8 | Scalarjob-info-attr-8 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.9 | Scalarjob-info-attr-9 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.10 | Scalarjob-info-attr-10 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.11 | Scalarjob-info-attr-11 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.12 | Scalarjob-info-attr-12 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.13 | Scalarjob-info-attr-13 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.14 | Scalarjob-info-attr-14 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.15 | Scalarjob-info-attr-15 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.16 | Scalarjob-info-attr-16 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.24 | Scalarjob-info-requested-originals | read-only | optional | The number of requested collated copies. The value was supplied with the job via PJL QTY variable, the PostScript Collate and NumCopies entries in the page dev… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.25 | Scalarjob-info-page-count-current-original | read-only | optional | The page number being printed within the current copy of a collated multi-copy job. This value changes when the job-info-pages-printed changes. The job-info-pa… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.26 | Scalarjob-info-pages-in-original | read-only | optional | Number of pages in a single copy of a collated multi-copy job. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.27 | Scalarjob-info-printed-originals | read-only | optional | Number of collated copies completely printed and delivered to the output bin at time of query. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28 | Nodejob-info-accounting | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.1 | Scalarjob-info-accounting-media-size | read-only | optional | Contains the media size of the printed job. The media size of the first page will decide the media size of the entire job. The return value of this object will… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.2 | Scalarjob-info-accounting-media-type | read-only | optional | Contains the media type of the printed job. The media type of the first page will decide the media type of the entire job. The return value of this object will… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.3 | Scalarjob-info-accounting-finishing-options | read-only | optional | Contains the finishing option used on the printed job. The finishing option specified for the first page will decide the finishing option of the entire job. Th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.4 | Scalarjob-info-accounting-media-simplex-count | read-only | optional | Contains the total number of simplex pages printed in a particular job. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.5 | Scalarjob-info-accounting-media-duplex-count | read-only | optional | Contains the total number of duplex pages printed in a particular job. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.6 | Scalarjob-info-accounting-grayscale-impression-count | read-only | optional | Contains the total number of monochrome pages printed in a particular job. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.7 | Scalarjob-info-accounting-color-impression-count | read-only | optional | Contains the total number of color pages printed in a particular job. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.8 | Scalarjob-info-accounting-black-dots | read-only | optional | Contains the total number of black pixels used in a particular job. Additional information: This object reports kilodots. (A kilodot is 1000 dots.) |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.14 | Scalarjob-info-accounting-job-type | read-only | optional | Keeps track of what type of job is processed. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7 | Nodeheld-job | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.1 | Nodeheld-job-info | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.1.1 | Scalarheld-job-user-name | read-only | optional | User name that is obtained by the driver through some internal method or from user input. Additional information: The following is a general description for al… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.1.2 | Scalarheld-job-job-name | read-only | optional | The job name may be generated by the driver or obtained from user input. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.1.3 | Scalarheld-job-retention | read-only | optional | Indicates the retention classification of the job. The values indicate whether the job is printed immediately or stored. There are 4 options: eHoldOff: The job… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.1.4 | Scalarheld-job-security | read-only | optional | The variable specifies the security level of the job. eHoldTypePublic: The job does not require a PIN in order to release the job for printing. eHoldTypePrivat… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.1.5 | Scalarheld-job-quantity | read-only | optional | Number of copies to print. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.1.6 | Scalarheld-job-pin | read-only | optional | A string that is specified in the job stream and then required to be entered in order to release the job for printing. PIN stands for Personal Identification N… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.2 | Nodeheld-job-control | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.2.1 | Scalarheld-job-print | write-only | optional | Instructs the printer to schedule the specified held job for printing with the specified number of copies. The job-id is used to identify which job to print. A… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.2.2 | Scalarheld-job-delete | write-only | optional | Instructs the printer to delete the specified held job from the list. The job-id is used to identify which job to delete. A held job can also be deleted from t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.2.3 | Scalarheld-job-set-queue-size | read-write | optional | Sets the maximum number of jobs which can be stored in the held job list. Additional information: Sets the size of the temporary job lists queue. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.2.4 | Scalarheld-job-enable | read-write | optional | Enables or disables Job Retention (Job Hold). The valid values are eDisabled and eEnabled. (Specifying an invalid mode causes an <badValue> error to be returne… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10 | Nodefile-system | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1 | Nodesettings-file-system | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.2 | Scalarfile-system-max-open-files | read-only | optional | The number of open files allowed at one time. Opening a file when the maximum number of files are currently open will fail. Additional information: Indicates t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.8 | Scalarfile-system-delete-files | write-only | optional | Setting this object causes the specified filename to be deleted, after first validating that the authentication data is correct for the specified user ID. The … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.10 | Scalarfile-system-external-access-capabilities | read-write | optional | This object is used to control access to the file system of the device. It is always readable. It is writable when <<hidden>> is not the empty string, and a su… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.11 | Scalarfile-system-erase-mode | read-write | optional | This object is used to control how file data is handled when files are deleted. It is always readable. It is writable when <<hidden>> is the empty string or wh… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.12 | Scalarfile-system-wipe-disk | read-write | optional | This object is a non-leaf node which will have one leaf node under it for each file system in the printer. The leaf nodes will be in a 1-to-1 correspondence wi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.13 | Scalarfile-system-wipe-disk-status | read-only | optional | This object is a non-leaf node which will have one leaf node under it for each file system in the printer. The leaf nodes will be in a 1-to-1 correspondence wi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3 | Nodefile-systems | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3.2 | Nodefile-system2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3.2.6 | Scalarfile-system2-initialize-volume | write-only | optional | Setting this object to eInitializing causes file system 2 to be initialized. Reading this object indicates if the file system is currently being initialized. A… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3.3 | Nodefile-system3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3.3.6 | Scalarfile-system3-initialize-volume | write-only | optional | Setting this object to eInitializing causes file device-system 3 to be initialized. Reading this object indicates if the file system is currently being initial… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3.4 | Nodefile-system4 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3.4.6 | Scalarfile-system4-initialize-volume | write-only | optional | Setting this object to eInitializing causes file system 4 to be initialized. Reading this object indicates if the file system is currently being initialized. A… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11 | Nodeerrorlog | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1 | Nodeerror1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1.1 | Scalarerror1-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 1 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1.2 | Scalarerror1-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1.3 | Scalarerror1-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1.4 | Scalarerror1-string | read-only | optional | This item contains an additional string which records related info of error 1. Additional information: This item contains the additional string when the error … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2 | Nodeerror2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2.1 | Scalarerror2-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 2 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2.2 | Scalarerror2-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2.3 | Scalarerror2-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2.4 | Scalarerror2-string | read-only | optional | This item contains an additional string which records related info of error 2. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3 | Nodeerror3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3.1 | Scalarerror3-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 3 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3.2 | Scalarerror3-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3.3 | Scalarerror3-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3.4 | Scalarerror3-string | read-only | optional | This item contains an additional string which records related info of error 3. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4 | Nodeerror4 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4.1 | Scalarerror4-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 4 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4.2 | Scalarerror4-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4.3 | Scalarerror4-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4.4 | Scalarerror4-string | read-only | optional | This item contains an additional string which records related info of error 4. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5 | Nodeerror5 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5.1 | Scalarerror5-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 5 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5.2 | Scalarerror5-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5.3 | Scalarerror5-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5.4 | Scalarerror5-string | read-only | optional | This item contains an additional string which records related info of error 5. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.6 | Nodeerror6 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.6.1 | Scalarerror6-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 6 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.6.2 | Scalarerror6-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.6.3 | Scalarerror6-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.6.4 | Scalarerror6-string | read-only | optional | This item contains an additional string which records related info of error 6. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.7 | Nodeerror7 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.7.1 | Scalarerror7-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 7 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.7.2 | Scalarerror7-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.7.3 | Scalarerror7-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.7.4 | Scalarerror7-string | read-only | optional | This item contains an additional string which records related info of error 7. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.8 | Nodeerror8 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.8.1 | Scalarerror8-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 8 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.8.2 | Scalarerror8-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.8.3 | Scalarerror8-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.8.4 | Scalarerror8-string | read-only | optional | This item contains an additional string which records related info of error 8. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.9 | Nodeerror9 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.9.1 | Scalarerror9-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 9 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.9.2 | Scalarerror9-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.9.3 | Scalarerror9-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.9.4 | Scalarerror9-string | read-only | optional | This item contains an additional string which records related info of error 9. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.10 | Nodeerror10 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.10.1 | Scalarerror10-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 10 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.10.2 | Scalarerror10-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.10.3 | Scalarerror10-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.10.4 | Scalarerror10-string | read-only | optional | This item contains an additional string which records related info of error 10. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.11 | Nodeerror11 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.11.1 | Scalarerror11-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 11 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.11.2 | Scalarerror11-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.11.3 | Scalarerror11-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.11.4 | Scalarerror11-string | read-only | optional | This item contains an additional string which records related info of error 11. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.12 | Nodeerror12 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.12.1 | Scalarerror12-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 12 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.12.2 | Scalarerror12-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.12.3 | Scalarerror12-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.12.4 | Scalarerror12-string | read-only | optional | This item contains an additional string which records related info of error 12. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.13 | Nodeerror13 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.13.1 | Scalarerror13-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 13 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.13.2 | Scalarerror13-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.13.3 | Scalarerror13-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.13.4 | Scalarerror13-string | read-only | optional | This item contains an additional string which records related info of error 13. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.14 | Nodeerror14 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.14.1 | Scalarerror14-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 14 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.14.2 | Scalarerror14-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.14.3 | Scalarerror14-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.14.4 | Scalarerror14-string | read-only | optional | This item contains an additional string which records related info of error 14. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.15 | Nodeerror15 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.15.1 | Scalarerror15-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 15 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.15.2 | Scalarerror15-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.15.3 | Scalarerror15-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.15.4 | Scalarerror15-string | read-only | optional | This item contains an additional string which records related info of error 15. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.16 | Nodeerror16 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.16.1 | Scalarerror16-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 16 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.16.2 | Scalarerror16-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.16.3 | Scalarerror16-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.16.4 | Scalarerror16-string | read-only | optional | This item contains an additional string which records related info of error 16. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.17 | Nodeerror17 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.17.1 | Scalarerror17-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 17 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.17.2 | Scalarerror17-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.17.3 | Scalarerror17-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.17.4 | Scalarerror17-string | read-only | optional | This item contains an additional string which records related info of error 17. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.18 | Nodeerror18 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.18.1 | Scalarerror18-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 18 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.18.2 | Scalarerror18-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.18.3 | Scalarerror18-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.18.4 | Scalarerror18-string | read-only | optional | This item contains an additional string which records related info of error 18. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.19 | Nodeerror19 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.19.1 | Scalarerror19-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 19 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.19.2 | Scalarerror19-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.19.3 | Scalarerror19-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.19.4 | Scalarerror19-string | read-only | optional | This item contains an additional string which records related info of error 19. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.20 | Nodeerror20 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.20.1 | Scalarerror20-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 20 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.20.2 | Scalarerror20-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.20.3 | Scalarerror20-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.20.4 | Scalarerror20-string | read-only | optional | This item contains an additional string which records related info of error 20. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.21 | Nodeerror21 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.21.1 | Scalarerror21-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 21 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.21.2 | Scalarerror21-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.21.3 | Scalarerror21-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.21.4 | Scalarerror21-string | read-only | optional | This item contains an additional string which records related info of error 21. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.22 | Nodeerror22 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.22.1 | Scalarerror22-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 22 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.22.2 | Scalarerror22-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.22.3 | Scalarerror22-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.22.4 | Scalarerror22-string | read-only | optional | This item contains an additional string which records related info of error 22. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.23 | Nodeerror23 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.23.1 | Scalarerror23-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 23 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.23.2 | Scalarerror23-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.23.3 | Scalarerror23-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.23.4 | Scalarerror23-string | read-only | optional | This item contains an additional string which records related info of error 23. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.24 | Nodeerror24 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.24.1 | Scalarerror24-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 24 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.24.2 | Scalarerror24-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.24.3 | Scalarerror24-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.24.4 | Scalarerror24-string | read-only | optional | This item contains an additional string which records related info of error 24. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.25 | Nodeerror25 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.25.1 | Scalarerror25-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 25 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.25.2 | Scalarerror25-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.25.3 | Scalarerror25-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.25.4 | Scalarerror25-string | read-only | optional | This item contains an additional string which records related info of error 25. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.26 | Nodeerror26 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.26.1 | Scalarerror26-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 26 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.26.2 | Scalarerror26-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.26.3 | Scalarerror26-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.26.4 | Scalarerror26-string | read-only | optional | This item contains an additional string which records related info of error 26. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.27 | Nodeerror27 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.27.1 | Scalarerror27-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 27 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.27.2 | Scalarerror27-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.27.3 | Scalarerror27-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.27.4 | Scalarerror27-string | read-only | optional | This item contains an additional string which records related info of error 27. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.28 | Nodeerror28 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.28.1 | Scalarerror28-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 28 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.28.2 | Scalarerror28-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.28.3 | Scalarerror28-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.28.4 | Scalarerror28-string | read-only | optional | This item contains an additional string which records related info of error 28. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.29 | Nodeerror29 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.29.1 | Scalarerror29-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 29 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.29.2 | Scalarerror29-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.29.3 | Scalarerror29-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.29.4 | Scalarerror29-string | read-only | optional | This item contains an additional string which records related info of error 29. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.30 | Nodeerror30 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.30.1 | Scalarerror30-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 30 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.30.2 | Scalarerror30-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.30.3 | Scalarerror30-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.30.4 | Scalarerror30-string | read-only | optional | This item contains an additional string which records related info of error 30. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.31 | Nodeerror31 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.31.1 | Scalarerror31-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 31 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.31.2 | Scalarerror31-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.31.3 | Scalarerror31-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.31.4 | Scalarerror31-string | read-only | optional | This item contains an additional string which records related info of error 31. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.32 | Nodeerror32 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.32.1 | Scalarerror32-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 32 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.32.2 | Scalarerror32-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.32.3 | Scalarerror32-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.32.4 | Scalarerror32-string | read-only | optional | This item contains an additional string which records related info of error 32. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.33 | Nodeerror33 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.33.1 | Scalarerror33-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 33 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.33.2 | Scalarerror33-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.33.3 | Scalarerror33-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.33.4 | Scalarerror33-string | read-only | optional | This item contains an additional string which records related info of error 33. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.34 | Nodeerror34 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.34.1 | Scalarerror34-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 34 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.34.2 | Scalarerror34-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.34.3 | Scalarerror34-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.34.4 | Scalarerror34-string | read-only | optional | This item contains an additional string which records related info of error 34. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.35 | Nodeerror35 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.35.1 | Scalarerror35-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 35 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.35.2 | Scalarerror35-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.35.3 | Scalarerror35-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.35.4 | Scalarerror35-string | read-only | optional | This item contains an additional string which records related info of error 35. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.36 | Nodeerror36 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.36.1 | Scalarerror36-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 36 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.36.2 | Scalarerror36-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.36.3 | Scalarerror36-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.36.4 | Scalarerror36-string | read-only | optional | This item contains an additional string which records related info of error 36. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.37 | Nodeerror37 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.37.1 | Scalarerror37-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 37 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.37.2 | Scalarerror37-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.37.3 | Scalarerror37-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.37.4 | Scalarerror37-string | read-only | optional | This item contains an additional string which records related info of error 37. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.38 | Nodeerror38 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.38.1 | Scalarerror38-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 38 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.38.2 | Scalarerror38-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.38.3 | Scalarerror38-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.38.4 | Scalarerror38-string | read-only | optional | This item contains an additional string which records related info of error 38. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.39 | Nodeerror39 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.39.1 | Scalarerror39-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 39 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.39.2 | Scalarerror39-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.39.3 | Scalarerror39-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.39.4 | Scalarerror39-string | read-only | optional | This item contains an additional string which records related info of error 39. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.40 | Nodeerror40 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.40.1 | Scalarerror40-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 40 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.40.2 | Scalarerror40-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.40.3 | Scalarerror40-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.40.4 | Scalarerror40-string | read-only | optional | This item contains an additional string which records related info of error 40. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.41 | Nodeerror41 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.41.1 | Scalarerror41-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 41 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.41.2 | Scalarerror41-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.41.3 | Scalarerror41-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.41.4 | Scalarerror41-string | read-only | optional | This item contains an additional string which records related info of error 41. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.42 | Nodeerror42 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.42.1 | Scalarerror42-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 42 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.42.2 | Scalarerror42-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.42.3 | Scalarerror42-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.42.4 | Scalarerror42-string | read-only | optional | This item contains an additional string which records related info of error 42. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.43 | Nodeerror43 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.43.1 | Scalarerror43-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 43 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.43.2 | Scalarerror43-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.43.3 | Scalarerror43-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.43.4 | Scalarerror43-string | read-only | optional | This item contains an additional string which records related info of error 43. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.44 | Nodeerror44 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.44.1 | Scalarerror44-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 44 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.44.2 | Scalarerror44-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.44.3 | Scalarerror44-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.44.4 | Scalarerror44-string | read-only | optional | This item contains an additional string which records related info of error 44. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.45 | Nodeerror45 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.45.1 | Scalarerror45-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 45 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.45.2 | Scalarerror45-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.45.3 | Scalarerror45-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.45.4 | Scalarerror45-string | read-only | optional | This item contains an additional string which records related info of error 45. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.46 | Nodeerror46 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.46.1 | Scalarerror46-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 46 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.46.2 | Scalarerror46-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.46.3 | Scalarerror46-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.46.4 | Scalarerror46-string | read-only | optional | This item contains an additional string which records related info of error 46. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.47 | Nodeerror47 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.47.1 | Scalarerror47-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 47 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.47.2 | Scalarerror47-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.47.3 | Scalarerror47-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.47.4 | Scalarerror47-string | read-only | optional | This item contains an additional string which records related info of error 47. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.48 | Nodeerror48 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.48.1 | Scalarerror48-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 48 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.48.2 | Scalarerror48-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.48.3 | Scalarerror48-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.48.4 | Scalarerror48-string | read-only | optional | This item contains an additional string which records related info of error 48. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.49 | Nodeerror49 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.49.1 | Scalarerror49-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 49 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.49.2 | Scalarerror49-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.49.3 | Scalarerror49-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.49.4 | Scalarerror49-string | read-only | optional | This item contains an additional string which records related info of error 49. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.50 | Nodeerror50 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.50.1 | Scalarerror50-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 50 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.50.2 | Scalarerror50-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.50.3 | Scalarerror50-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.50.4 | Scalarerror50-string | read-only | optional | This item contains an additional string which records related info of error 50. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.51 | Nodeerror51 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.51.1 | Scalarerror51-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 51 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.51.2 | Scalarerror51-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.51.3 | Scalarerror51-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.51.4 | Scalarerror51-string | read-only | optional | This item contains an additional string which records related info of error 51. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.52 | Nodeerror52 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.52.1 | Scalarerror52-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 52 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.52.2 | Scalarerror52-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.52.3 | Scalarerror52-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.52.4 | Scalarerror52-string | read-only | optional | This item contains an additional string which records related info of error 52. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.53 | Nodeerror53 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.53.1 | Scalarerror53-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 53 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.53.2 | Scalarerror53-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.53.3 | Scalarerror53-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.53.4 | Scalarerror53-string | read-only | optional | This item contains an additional string which records related info of error 53. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.54 | Nodeerror54 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.54.1 | Scalarerror54-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 54 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.54.2 | Scalarerror54-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.54.3 | Scalarerror54-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.54.4 | Scalarerror54-string | read-only | optional | This item contains an additional string which records related info of error 54. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.55 | Nodeerror55 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.55.1 | Scalarerror55-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 55 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.55.2 | Scalarerror55-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.55.3 | Scalarerror55-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.55.4 | Scalarerror55-string | read-only | optional | This item contains an additional string which records related info of error 55. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.56 | Nodeerror56 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.56.1 | Scalarerror56-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 56 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.56.2 | Scalarerror56-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.56.3 | Scalarerror56-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.56.4 | Scalarerror56-string | read-only | optional | This item contains an additional string which records related info of error 56. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.57 | Nodeerror57 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.57.1 | Scalarerror57-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 57 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.57.2 | Scalarerror57-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.57.3 | Scalarerror57-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.57.4 | Scalarerror57-string | read-only | optional | This item contains an additional string which records related info of error 57. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.58 | Nodeerror58 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.58.1 | Scalarerror58-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 58 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.58.2 | Scalarerror58-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.58.3 | Scalarerror58-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.58.4 | Scalarerror58-string | read-only | optional | This item contains an additional string which records related info of error 58. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.59 | Nodeerror59 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.59.1 | Scalarerror59-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 59 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.59.2 | Scalarerror59-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.59.3 | Scalarerror59-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.59.4 | Scalarerror59-string | read-only | optional | This item contains an additional string which records related info of error 59. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.60 | Nodeerror60 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.60.1 | Scalarerror60-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 60 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.60.2 | Scalarerror60-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.60.3 | Scalarerror60-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.60.4 | Scalarerror60-string | read-only | optional | This item contains an additional string which records related info of error 60. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.61 | Nodeerror61 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.61.1 | Scalarerror61-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 61 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.61.2 | Scalarerror61-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.61.3 | Scalarerror61-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.61.4 | Scalarerror61-string | read-only | optional | This item contains an additional string which records related info of error 61. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.62 | Nodeerror62 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.62.1 | Scalarerror62-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 62 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.62.2 | Scalarerror62-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.62.3 | Scalarerror62-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.62.4 | Scalarerror62-string | read-only | optional | This item contains an additional string which records related info of error 62. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.63 | Nodeerror63 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.63.1 | Scalarerror63-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 63 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.63.2 | Scalarerror63-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.63.3 | Scalarerror63-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.63.4 | Scalarerror63-string | read-only | optional | This item contains an additional string which records related info of error 63. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.64 | Nodeerror64 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.64.1 | Scalarerror64-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 64 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.64.2 | Scalarerror64-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.64.3 | Scalarerror64-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.64.4 | Scalarerror64-string | read-only | optional | This item contains an additional string which records related info of error 64. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.65 | Nodeerror65 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.65.1 | Scalarerror65-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 65 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.65.2 | Scalarerror65-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.65.3 | Scalarerror65-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.65.4 | Scalarerror65-string | read-only | optional | This item contains an additional string which records related info of error 65. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.66 | Nodeerror66 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.66.1 | Scalarerror66-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 66 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.66.2 | Scalarerror66-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.66.3 | Scalarerror66-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.66.4 | Scalarerror66-string | read-only | optional | This item contains an additional string which records related info of error 66. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.67 | Nodeerror67 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.67.1 | Scalarerror67-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 67 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.67.2 | Scalarerror67-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.67.3 | Scalarerror67-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.67.4 | Scalarerror67-string | read-only | optional | This item contains an additional string which records related info of error 67. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.68 | Nodeerror68 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.68.1 | Scalarerror68-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 68 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.68.2 | Scalarerror68-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.68.3 | Scalarerror68-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.68.4 | Scalarerror68-string | read-only | optional | This item contains an additional string which records related info of error 68. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.69 | Nodeerror69 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.69.1 | Scalarerror69-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 69 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.69.2 | Scalarerror69-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.69.3 | Scalarerror69-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.69.4 | Scalarerror69-string | read-only | optional | This item contains an additional string which records related info of error 69. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.70 | Nodeerror70 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.70.1 | Scalarerror70-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 70 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.70.2 | Scalarerror70-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.70.3 | Scalarerror70-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.70.4 | Scalarerror70-string | read-only | optional | This item contains an additional string which records related info of error 70. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.71 | Nodeerror71 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.71.1 | Scalarerror71-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 71 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.71.2 | Scalarerror71-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.71.3 | Scalarerror71-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.71.4 | Scalarerror71-string | read-only | optional | This item contains an additional string which records related info of error 71. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.72 | Nodeerror72 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.72.1 | Scalarerror72-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 72 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.72.2 | Scalarerror72-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.72.3 | Scalarerror72-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.72.4 | Scalarerror72-string | read-only | optional | This item contains an additional string which records related info of error 72. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.73 | Nodeerror73 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.73.1 | Scalarerror73-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 73 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.73.2 | Scalarerror73-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.73.3 | Scalarerror73-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.73.4 | Scalarerror73-string | read-only | optional | This item contains an additional string which records related info of error 73. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.74 | Nodeerror74 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.74.1 | Scalarerror74-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 74 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.74.2 | Scalarerror74-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.74.3 | Scalarerror74-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.74.4 | Scalarerror74-string | read-only | optional | This item contains an additional string which records related info of error 74. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.75 | Nodeerror75 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.75.1 | Scalarerror75-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 75 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.75.2 | Scalarerror75-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.75.3 | Scalarerror75-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.75.4 | Scalarerror75-string | read-only | optional | This item contains an additional string which records related info of error 75. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.76 | Nodeerror76 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.76.1 | Scalarerror76-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 76 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.76.2 | Scalarerror76-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.76.3 | Scalarerror76-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.76.4 | Scalarerror76-string | read-only | optional | This item contains an additional string which records related info of error 76. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.77 | Nodeerror77 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.77.1 | Scalarerror77-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 77 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.77.2 | Scalarerror77-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.77.3 | Scalarerror77-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.77.4 | Scalarerror77-string | read-only | optional | This item contains an additional string which records related info of error 77. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.78 | Nodeerror78 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.78.1 | Scalarerror78-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 78 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.78.2 | Scalarerror78-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.78.3 | Scalarerror78-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.78.4 | Scalarerror78-string | read-only | optional | This item contains an additional string which records related info of error 78. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.79 | Nodeerror79 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.79.1 | Scalarerror79-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 79 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.79.2 | Scalarerror79-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.79.3 | Scalarerror79-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.79.4 | Scalarerror79-string | read-only | optional | This item contains an additional string which records related info of error 79. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.80 | Nodeerror80 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.80.1 | Scalarerror80-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 80 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.80.2 | Scalarerror80-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.80.3 | Scalarerror80-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.80.4 | Scalarerror80-string | read-only | optional | This item contains an additional string which records related info of error 80. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.81 | Nodeerror81 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.81.1 | Scalarerror81-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 81 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.81.2 | Scalarerror81-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.81.3 | Scalarerror81-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.81.4 | Scalarerror81-string | read-only | optional | This item contains an additional string which records related info of error 81. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.82 | Nodeerror82 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.82.1 | Scalarerror82-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 82 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.82.2 | Scalarerror82-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.82.3 | Scalarerror82-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.82.4 | Scalarerror82-string | read-only | optional | This item contains an additional string which records related info of error 82. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.83 | Nodeerror83 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.83.1 | Scalarerror83-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 83 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.83.2 | Scalarerror83-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.83.3 | Scalarerror83-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.83.4 | Scalarerror83-string | read-only | optional | This item contains an additional string which records related info of error 83. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.84 | Nodeerror84 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.84.1 | Scalarerror84-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 54 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.84.2 | Scalarerror84-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.84.3 | Scalarerror84-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.84.4 | Scalarerror84-string | read-only | optional | This item contains an additional string which records related info of error 84. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.85 | Nodeerror85 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.85.1 | Scalarerror85-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 85 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.85.2 | Scalarerror85-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.85.3 | Scalarerror85-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.85.4 | Scalarerror85-string | read-only | optional | This item contains an additional string which records related info of error 85. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.86 | Nodeerror86 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.86.1 | Scalarerror86-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 86 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.86.2 | Scalarerror86-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.86.3 | Scalarerror86-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.86.4 | Scalarerror86-string | read-only | optional | This item contains an additional string which records related info of error 86. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.87 | Nodeerror87 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.87.1 | Scalarerror87-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 87 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.87.2 | Scalarerror87-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.87.3 | Scalarerror87-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.87.4 | Scalarerror87-string | read-only | optional | This item contains an additional string which records related info of error 87. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.88 | Nodeerror88 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.88.1 | Scalarerror88-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 88 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.88.2 | Scalarerror88-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.88.3 | Scalarerror88-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.88.4 | Scalarerror88-string | read-only | optional | This item contains an additional string which records related info of error 88. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.89 | Nodeerror89 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.89.1 | Scalarerror89-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 89 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.89.2 | Scalarerror89-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.89.3 | Scalarerror89-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.89.4 | Scalarerror89-string | read-only | optional | This item contains an additional string which records related info of error 89. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.90 | Nodeerror90 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.90.1 | Scalarerror90-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 90 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.90.2 | Scalarerror90-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.90.3 | Scalarerror90-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.90.4 | Scalarerror90-string | read-only | optional | This item contains an additional string which records related info of error 90. Additional information: See ERROR1-STRING. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.12 | Noderesource-manager | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.12.3 | Nodemass-storage-resources | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.12.3.1 | Scalarmass-storage-resource-change-counter | read-only | optional | A counter which changes when a mass storage based resource has been added or deleted. Additional information: The value of this counter changes each time the M… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.12.3.2 | Scalarmass-storage-resource-changed | write-only | optional | Setting to eTrue causes MASS-STORAGE-RESOURCE-CHANGE-COUNTER to be incremented. Additional information: Returns <noSuchName> status if attempting to access thi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13 | Noderemote-procedure-call | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.1 | Nodesettings-rpc | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.1.2 | Scalarrpc-bind-protocol-address | read-only | optional | Array of Berkeley sockets style protocol addresses used to bind RPC to a communications protocol family. Setting an instance of this array object to a zero len… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.2 | Nodestatus-rpc | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.2.3 | Scalarrpc-bound-protocol-address | read-only | optional | An array of Berkeley sockets style protocol addresses that the NFS service has been bound to successful. The format is that same as the array of RPC-BIND-PROTO… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.15 | Nodemass-storage-block-driver | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.15.1 | Nodesettings-mass-storage-bd | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.15.1.1 | Scalarram-disk-mode | read-write | optional | Returns or controls RAM disk support. eOFF turns off the RAM disk functionality. eOn turns on the RAM disk functionality and creates a RAM disk whose size is c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.15.1.2 | Scalarram-disk-size | read-only | optional | Returns or controls the size of the RAM disk. The device POS specifies the minimum memory requirements. The object MAXIMUM-RAM-DISK-MEMORY specifies the maximu… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.15.2 | Nodestatus-mass-storage-bd | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.15.2.1 | Scalarmaximum-ram-disk-memory | read-only | optional | This object's name is misleading. This object does not return the maximum configurable RAM disk size. Instead, it returns the maximum amount of memory, in byte… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16 | Nodeaccounting | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1 | Nodeprinter-accounting | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1 | Nodeprinted-media-usage | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.1 | Scalarprinted-media-simplex-count | read-only | optional | Total number of simplex pages printed in this media size. Additional information: The 5 usage (simplex/duplex count, simplex/duplex click charge and paper size… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.2 | Scalarprinted-media-simplex-charge | read-write | optional | Charge for each simplex page printed in this media size. Additional information: Setting this object has the effect of altering PRINTED-MEDIA-DUPLEX-CHARGE to … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.3 | Scalarprinted-media-duplex-count | read-only | optional | Total number of duplex pages printed in this media size. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.4 | Scalarprinted-media-duplex-charge | read-write | optional | Charge for each duplex page printed in this media size. Additional information: The click charges for duplex printed media. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.5 | Scalarprinted-media-total-charge | read-only | optional | The total charge for pages printed in this media size. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.6 | Scalarprinted-media-maximum-pixels-per-page | read-only | optional | The number of pixels required to completely fill a page of this media size. The device POS will specify the resolution at which this pixel count was calculated… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.7 | Scalarprinted-media-combined-total | read-only | optional | Total number of letter equivalently weighted pages both color and mono combined with this printer. Additional information: The combined total per page size of … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.10 | Scalarprinted-media-dimplex-count | read-only | optional | Total number of mono dimplex pages printed in this media size. A dimplex page is one that has been printed in duplex mode but the back side is blank. Dimplex p… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.11 | Scalarprinted-media-combined-simplex-count | read-only | optional | Total number of simplex pages printed on this media size. Additional information: The combined total per page size of simplex color and mono pages. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.12 | Scalarprinted-media-combined-duplex-count | read-only | optional | Total number of duplex pages printed on this media size. Additional information: The combined total per page size of duplex color and mono pages. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.13 | Scalarprinted-media-combined-simplex-total | read-only | optional | Total number of simplex pages printed on this device. Additional information: The combined total of all page sizes in color and mono simplex pages. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.14 | Scalarprinted-media-combined-duplex-total | read-only | optional | Total number of duplex pages printed on this device. Additional information: The combined total of all page sizes in color and mono duplex pages. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.2 | Scalarusage-printer-total-charge | read-only | optional | Total printer charge for all paper sizes printed. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.4 | Scalarusage-staple-count | read-only | optional | Total number of staples used. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.5 | Scalarusage-instructions-line1 | read-write | optional | The first line of usage instructions for the device user.Appears on Line 1 of the usage page. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.6 | Scalarusage-instructions-line2 | read-write | optional | The second line of usage instructions for the device user.Appears on Line 1 of the usage page. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.7 | Scalarusage-instructions-line3 | read-write | optional | The third line of usage instructions for the device user.Appears on Line 1 of the usage page. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.8 | Scalarusage-instructions-line4 | read-write | optional | The fourth line of usage instructions for the device user.Appears on Line 1 of the usage page. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.9 | Scalarprinted-modes-usage-total | read-only | optional | This object reports the total color and mono print modes usage for the life of the printer. This value is reported on the usage page. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.10 | Scalarsource-tray-usage-total | read-only | optional | This object reports the total source tray usage for the life of the printer. This value is reported on the usage page. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.11 | Scalardestination-bin-usage-total | read-only | optional | This object reports the total destination bin usage for the life of the printer. This value is reported on the usage page. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.4 | Nodeprinted-modes-accounting | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.4.1 | Nodeprinted-modes-usage | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.4.1.5 | Scalarprinted-modes-total-count | read-only | optional | The total count for pages printed in this fuser mode. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.5 | Nodesource-tray-accounting | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.5.1 | Nodesource-tray-usage | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.5.1.1 | Scalarsource-tray-usage-count | read-only | optional | Total number of pages printed from this source tray. Additional information: This object will track how many images have been printed with the original source … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.6 | Nodedestination-bin-accounting | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.6.1 | Nodedestination-bin-usage | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.6.1.1 | Scalardestination-bin-usage-count | read-only | optional | Total number of pages printed to this destination bin. Additional information: This object will track how many images have been printed with the original desti… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.18 | Nodefirmware-download | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.18.1 | Scalarfirmware-download-write-status-supported | read-only | optional | This object provides information on whether the printer has the ability to communicate the write-status of the firmware download while the download is taking p… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.18.2 | Scalarfirmware-download-write-time | read-only | optional | If the design of the firmware-download implementation does not allow PML interaction during the download process, this value provides an estimation of the time… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.18.4 | Scalarfirmware-download-current-state | read-only | optional | Provides the current or last reportable state of the firmware download process. The current state may not necessarily be the current state, but could be the po… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.18.6 | Scalarfirmware-download-name | read-only | mandatory | This returns the name of the printer. This should match the name in the header of the upgrade image being sent to the flash part. If the name does not match wi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.18.7 | Scalarfirmware-download-version | read-only | mandatory | This object will return a string value representing the current revision of firmware that the printer is operating with. This is used to determine if code need… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.19 | Nodeoperating-system | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.19.1 | Scalaros-execute-file | write-only | optional | This object's input is a null-terminated string representing a fully-qualified path name for an executable file. This object causes the file to be executed by … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.20 | Nodeupgradable-devices | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.20.1 | Scalarupgradable-devices-write-status-supported | read-only | optional | This object provides information on whether the upgradable device has the ability to communicate the write-status of the upgrade while the upgrade is taking pl… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.20.2 | Scalarupgradable-devices-write-time | read-only | optional | If the design of the device upgrade implementation does not allow PML interaction during the download process, this value provides an estimation of the time wh… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.20.4 | Scalarupgradable-devices-current-state | read-only | optional | Provides the current or last reportable state of the device upgrade process. The current state may not necessarily be the current state, but could be the post-… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.20.6 | Scalarupgradable-devices-name | read-only | mandatory | This returns the name of the upgradable device. This should match the name in the header of the upgrade image being sent to the flash part. If the name does no… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.20.7 | Scalarupgradable-devices-version | read-only | mandatory | This object will return a string value representing the current revision of firmware that device X is operating with. This is used to determine if code needs t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.20.8 | Scalarremote-upgrade-enable | read-write | mandatory | Enables or disables the ability to upgrade the firmware associated with any device that is available to be upgraded. This will be set to on or off at the RFU l… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.20.10 | Scalarupgradeable-devices-generic-name | read-only | mandatory | This object returns the generic component name of the printer and the upgradable devices. Instead of returning unique model names, this object will return name… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2 | Nodesource-subsystem | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1 | Nodeio | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1 | Nodesettings-io | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.1 | Scalario-timeout | read-write | optional | The amount of time, in seconds, to wait for more print job data to be received before an I/O timeout occurs. The I/O channel being timed is the I/O channel tha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.2 | Scalario-switch | read-only | optional | Indicates if the device will switch between I/O channels when a job boundary is encountered and print job data is available on another I/O channel. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.3 | Nodeports | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.3.1 | Nodeport1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.3.1.4 | Scalarport1-parallel-speed | read-write | optional | Returns or changes the maximum parallel I/O port speed, for port 1. This object is only supported if this port is a parallel port. An eSlow setting causes a 10… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.3.1.5 | Scalarport1-parallel-bidirectionality | read-write | optional | Returns or changes whether the parallel I/O port supports bidirectional communication for port 1. This object is only supported if this port is a parallel port… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.4 | Nodespooler | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.4.1 | Nodesettings-spooler | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.4.1.1 | Scalarmopy-mode | read-write | optional | Controls or reports how mopies are generated. eOff turns off the mopy feature. eAuto allows the device to determine the best method for generating mopies based… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3 | Nodeprocessing-subsystem | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3 | Nodepdl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1 | Nodesettings-pdl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.4 | Scalardefault-copies | read-write | optional | Returns or changes default copies. Default copies is the default values used by the PDL to control the number of copies of each page in the print job that are … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.5 | Scalarform-feed | write-only | optional | Instructs the PDL processing sub-system to finishing processing the current page of the current job. Form feed is also known as close page or eject page. If th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.8 | Scalardefault-vertical-black-resolution | read-write | optional | Returns or changes the value of the default vertical black resolution. The units are dots per inch. Additional information: In $product_str changing this OID a… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.9 | Scalardefault-horizontal-black-resolution | read-write | optional | Returns or changes the value of the default horizontal black resolution. The units are dots per inch. Additional information: In $product_str changing this obj… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.10 | Scalardefault-page-protect | read-write | optional | Returns or changes the default page protection behavior. If eOff, the device does not reserve memory for holding the entire raster form of a processed page. If… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.11 | Scalardefault-lines-per-page | read-write | optional | Returns or changes the default number of lines per page. The POS indicates the supported values. An unsupported value causes the printer to use the closest sup… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.12 | Scalardefault-vmi | read-write | optional | Returns or changes the default vertical motion index. The unit of measure for VMI is centipoints per line. The POS indicates the supported values. An unsupport… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.13 | Scalardefault-media-size | read-write | optional | This indicates the default media size. A write of an unsupported value causes an <ErrorInvalidOrUnsupported Value>. Complete list of supported media sizes alon… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.19 | Scalarcold-reset-media-size | read-write | optional | Returns or sets the media size that is used as the DEFAULT-MEDIA-SIZE when a cold reset occurs. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.36 | Scalarreprint | read-write | optional | Returns or changes the reprint (jam recovery) setting. If eOn, then the device will reprint pages jammed pages. If eOff, the device will not attempt to reprint… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.39 | Scalardefault-bits-per-pixel | read-write | optional | Controls the number of levels used (per pixel) when printing grayscale or color images. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.2 | Nodestatus-pdl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.2.2 | Scalarform-feed-needed | read-only | optional | Indicates if the PDL processing sub-system has made marks on the current page and the source subsystem has been idle for a device specific amount of time. Addi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3 | Nodepdl-pcl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.5 | Scalarpcl-total-page-count | read-only | optional | Total number of PCL pages printed by the device. Additional information: In $product_str the PCL page count is kept in NVRAM, and the NVRAM value is updated at… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.13 | Scalarpcl-default-font-height | read-write | optional | Returns or changes the default PCL height. Height is an approximate measure of the body of the type in centipoints. A centipoint is 1/7200 inch. Height applies… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.14 | Scalarpcl-default-font-source | read-write | optional | Returns or changes the value of the default font source variable in NVRAM. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.15 | Scalarpcl-default-font-number | read-write | optional | Returns or changes the value of the default font number variable in NVRAM. Writing an unsupported value causes the printer to generate an <badValue>. Additiona… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.16 | Scalarpcl-default-font-width | read-write | optional | Returns or changes the default PCL font width. Width is expressed as the width of a character in centipoints. A centipoint is 1/7200 inch. Width applies only t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4 | Nodepdl-postscript | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.5 | Scalarpostscript-total-page-count | read-only | optional | Total number of PostScript pages printed by the device. Additional information: This object is only supported if the PostScript option is installed. In $produc… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.11 | Scalarpostscript-print-errors | read-write | optional | Returns or changes the value of the print PostScript errors setting. If eOn, PostScript prints an error page showing the error encountered and the stack at the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.14 | Scalarpostscript-defer-media | read-write | optional | This object will be used to enable or disable the use of the Adobe Postscript Paper Handling Model in the printer firmware. By default it is enabled which mean… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.15 | Nodepdl-pdf | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.15.4 | Scalarpdf-print-errors | read-write | optional | Returns or changes the value of the print PDF errors setting. If eOn, PDF prints an error page showing the error encountered and the stack at the time of the e… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.4 | Nodepml | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.5 | Nodepjl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.9 | Nodewebserver-proc-sub | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.9.1 | Nodesettings-webserver | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.9.1.3 | Scalarweb-server-security | read-write | optional | Each collection bit represents a device or Embedded Web Server feature that can be enabled or disabled via this object. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4 | Nodedestination-subsystem | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1 | Nodeprint-engine | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1 | Nodesettings-prt-eng | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.5 | Scalarprint-density | read-write | optional | Returns or sets the print density setting. Print density is the instantaneous amount of marking agent applied to the paper while printing. A value of zero has … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.9 | Nodemarking-agent-density | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.9.1 | Scalarmarking-agent-density-setting | read-write | optional | Returns or sets the marking agent density setting for each of the marking agents installed. The Marking Agent (aka Print) density is the instantaneous amount o… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.10 | Scalarautocleaning-page-enable | read-write | optional | When set to eEnabled this object will enable the periodic printing of a page designed to clean the fuser on an EP printing system. The interval between cleanin… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.11 | Scalarautocleaning-page-frequency | read-write | optional | Controls the number of pages between printing of the auto cleaning page (if enabled). Any device specific 'snap' behavior for this page interval will be specif… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.12 | Scalarautocleaning-page-size | read-write | optional | Controls the size of paper used to print the auto cleaning page (if enabled). Additional information: Controls the size of paper used to print the auto cleanin… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.21 | Scalarcalibration-power-on-delay | read-write | optional | This is the delay interval for the power on calibration in minutes. This PML object is only used if the CALIBRATION-POWER-ON-INITIATION PML object is set to eD… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.28 | Scalarduplex-blank-pages | read-write | optional | When the value of the system variable is set to eDuplexBlankPagesAuto, it means to Smart Duplex in any of the specified conditions. This selection is logically… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.31 | Scalarfinisher-image-rotation | read-write | optional | This PML object will provide the additional image rotation that is applied to a printed job depending on the presence or absence of a finisher device or the va… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.35 | Scalarmedia-sensor-calibration | write-only | optional | This object is used to start the media sensor calibration. If you do a get on this object it will simply return the media sensor state. If you set this object … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.36 | Scalarcartridge-adaptive-gain | read-only | optional | The Adaptive TA Gain is stored for the last 5 cartridges. Cartridge one is the most recent to be installed (current), and cartridge 5 is least recent to be ins… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.37 | Scalarcartridge-adaptive-gain-reset | read-write | optional | This object will Reset the Adaptive TA Gain value to 1.00 and disable the adaptive TA routine. The value that this object returns is stored in non-volatile mem… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.38 | Scalarsupplies-at-very-low-setting | read-write | optional | This object can be used to change the setting of menu item AT VERY LOW. The behavior of the printer when a supply reaches low changes in accordance with the se… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2 | Nodestatus-prt-eng | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.6 | Scalartotal-mono-page-count | read-only | optional | Total number of black pages printed by the device. Additional information: Total number of black pages printed by the device. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.22 | Scalarduplex-page-count | read-only | optional | Total number of sheets of media that have been duplex printed. A sheet is counted if it travels through the duplex page path, regardless of whether or not mark… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.26 | Scalarprint-engine-revision | read-only | optional | Print engine revision string. Additional information: Print engine revision string. The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.48 | Scalarsupply-out-action-support | read-only | optional | This object is used to determine if a particular capability that allows printing to continue after one or more cartridge has reached out is supported by the de… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.49 | Scalarsupply-out-device-state | read-only | optional | This PML object indicates the current behavior of the device if one or more supplies have reached out. If no supply has reached out, the value of this PML obje… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.50 | Scalarsupply-after-out-state | read-only | optional | This object is used to read and write the various status flags indicating whether the consumable was used after out. The collection bits supported include: cNo… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3 | Nodeintray | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1 | Nodesettings-intray | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.2 | Scalarinput-tray-auto-select | read-write | optional | Indicates if the device will automatically try to load media from the next input media tray in the auto-select sequence (defined by each device) when it cannot… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.8 | Scalarcustom-paper-feed-dim | read-write | optional | Sets the printer's custom paper dimension in the feed direction (direction parallel to the direction of paper feeding). The value for this object is specified … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.9 | Scalarcustom-paper-xfeed-dim | read-write | optional | Sets the printer's custom paper dimension in the cross-feed direction (direction ninety degrees relative to the direction of paper feeding). The value for this… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.10 | Scalardefault-custom-paper-dim-unit | read-write | optional | The units of measure used to specify the width and height of the printer's default custom paper size. The unit of measure of eTenThousandthsOfInches is 0.0001 … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.11 | Scalardefault-custom-paper-feed-dim | read-write | optional | Sets the printer's default custom paper size dimension in the feed direction (direction parallel to the direction of paper feeding). The value for this object … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.12 | Scalardefault-custom-paper-xfeed-dim | read-write | optional | Sets the printer's default custom paper size dimension in the cross-feed direction (direction ninety degrees relative to the direction of paper feeding). The v… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.14 | Scalarinput-tray-max-media-feed-dim | read-only | optional | The maximum physical media size in the feed direction of this input device expressed in units of measure specified by INPUT- TRAY-MIN-MAX-DIM-UNIT. A value of … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.15 | Scalarinput-tray-max-media-xfeed-dim | read-only | optional | The maximum physical media size across the feed direction of a particular input device expressed in units of measure specified by INPUT-TRAY-MIN-MAX-DIM-UNIT. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.16 | Scalarinput-tray-min-media-feed-dim | read-only | optional | The minimum physical media size in the feed direction of a particular input device expressed in units of measure specified by PrtInputMinMaxDimUnit. A value of… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.17 | Scalarinput-tray-min-media-xfeed-dim | read-only | optional | The minimum physical media size across the feed direction of a particular input device expressed in units of measure specified by PrtInputMinMaxDimUnit. A valu… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.19 | Scalartray-prompt | read-write | optional | If this object is set to eDisplay, whenever a paper tray is opened, refilled, and closed in a printer, the end user is prompted with a message 'To change size … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3 | Nodeintrays | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1 | Nodeintray1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.1 | Scalartray1-media-size-loaded | read-write | optional | Returns the media size that is currently configuredconfigured in tray #1. This object can be set to indicate the media size currently loaded, if the printer su… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.12 | Scalartray1-phd | read-only | optional | Provides the number of the Paper Handling Device that contains this input tray. Additional information: Provides the number of the Paper Handling Device that c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2 | Nodeintray2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.1 | Scalartray2-media-size-loaded | read-write | optional | Returns the media size that is currently configured in tray #2. Complete list of supported media sizes along with their dimensions are listed in the ''Media Si… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.12 | Scalartray2-phd | read-only | optional | Provides the number of the Paper Handling Device that contains this input tray. Additional information: Provides the number of the Paper Handling Device that c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3 | Nodeintray3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3.1 | Scalartray3-media-size-loaded | read-write | optional | Returns the media size that is currently configured in tray #3. Complete list of supported media sizes along with their dimensions are listed in the ''Media Si… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3.12 | Scalartray3-phd | read-only | optional | Provides the number of the Paper Handling Device that contains this input tray. Additional information: Provides the number of the Paper Handling Device that c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.5 | Nodeintray5 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.5.1 | Scalartray5-media-size-loaded | read-write | optional | Returns the media size that is currently configured in tray #5. Complete list of supported media sizes along with their dimensions are listed in the ''Media Si… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.5.12 | Scalartray5-phd | read-only | optional | Provides the number of the Paper Handling Device that contains this input tray. Additional information: Provides the number of the Paper Handling Device that c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4 | Nodeoutbin | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.1 | Nodesettings-outbin | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.1.4 | Scalaroverflow-bin | read-write | optional | Returns or sets the bin that will be used for additional sheets of media when the current bin is full and printing is allowed to continue. Additional informati… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3 | Nodeoutbins | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.1 | Nodeoutbin1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.1.9 | Scalaroutbin1-override-mode | read-write | optional | Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7 | Nodeph | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.1 | Nodesettings-ph | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.1.1 | Scalartray-disable-use-instead | read-write | optional | If this object is set to eEnabled, the paper mount message that is normally posted('To use another tray....') is turned off thereby disallowing the user to spe… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8 | Nodeprint-media | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.1 | Nodesettings-print-media | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.1.2 | Scalarnorth-edge-offset | read-write | optional | Returns or sets the number of 300 dpi dots by which the image is shifted. Shift is relative to the leading edge of the medium as the medium flows through the m… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.4 | Nodemedia-modes | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.4.1 | Scalarengine-media-modes-supported1 | read-only | optional | The list of engine media modes supported by the device. The modes are each separated by a comma character. An example string would be: 'Normal,Rough,Low,Vellum… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.5 | Nodemedia-size | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.5.1 | Scalarmedia-size-count | read-only | optional | The number of impressions printed on sheets of this media size. The device POS should state whether this value is lost across a power cycle or is kept in perma… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.5.2 | Scalarmedia-size-west-edge-first-side-offset | read-write | optional | Returns or sets the number of 300 dpi dots by which the image is shifted relative to the west edge of the medium (see NORTH-EDGE-OFFSET). The adjustment is for… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.5.3 | Scalarmedia-size-west-edge-second-side-offset | read-write | optional | Returns or sets the number of 300 dpi dots by which the image is shifted relative to the west edge of the medium (see NORTH-EDGE-OFFSET). The adjustment is for… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.5.4 | Scalarmedia-size-west-edge-side-offset-by-tray | read-write | optional | Returns or sets the number of 300 dpi dots by which the image is shifted relative to the west edge of the medium (see NORTH-EDGE-OFFSET). A positive value move… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.7 | Nodemedia-counts | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.7.1 | Scalarnon-assured-oht-page-count | read-only | optional | This is a count of the number of invalid (non-HP Laser Jet) transparencies that have been printed on. This value is incremented every time an invalid OHT is pr… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10 | Nodeconsumables | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.1 | Nodeconsumables-1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.1.1 | Nodeconsumable-status | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.1.1.13 | Scalarconsumable-status-page-count-b5-executive | read-only | optional | This object is used to report the number of pages that have been printed by this consumable that are of the specified media size - B5 or Executive. Additional … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.1.1.56 | Scalarconsumable-status-partnumber | read-only | optional | This object will have one sub-array for the consumable and will will hold the consumable's part number. Additional information: This object is used to report P… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.1.1.75 | Scalarconsumable-status-web-service-access-data | read-only | optional | This object is used to report Web Service Access Data. Additional information: This object is used to report Web Service Access Data. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.1.1.76 | Scalarconsumable-status-web-service-access-control | read-only | optional | This object is used to report data that controls how web service access is enabled. Additional information: This object is used to report data that controls ho… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.1.1.96 | Scalarconsumable-status-tls-max-value | read-only | optional | This object returns the toner level sensor (TLS) max value for the consumable. Additional information: This object returns the TLS max value for the consumable. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.1.1.97 | Scalarconsumable-status-printer-design-compatibility | read-only | optional | This object will returns the value of printer design compatibility for the consumable. Additional information: This object will returns the value of printer de… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.1.1.100 | Scalarconsumable-current-pixels-printed-for-iso-page | read-only | optional | This object is used to get Current value of Pixels Page Page Value in firmware for each color type. Returns integer value of current pixels per page. Additiona… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.1.1.101 | Scalarconsumable-last-pixels-printed-for-iso-page | read-only | optional | This object is used to get Pixels Page Page Value for last printed page for each color type. Returns integer value of current pixels per page. Additional infor… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.1.1.102 | Scalarconsumable-status-formatter-mono-page-count | read-only | optional | This object is used for getting current value of formatter mono page count on e lable. This object will be applocable for mono procuts only. Additional informa… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.2 | Scalarconsumable-reorder-url | read-write | optional | This object is used to read and write the URL that can be used to reorder consumables for this device. This URL is set at the factory but can be updated by a r… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.5 | Nodeconsumables-status | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.5.1 | Nodeconsumables-life | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.5.1.1 | Scalarconsumable-life-usage-units-remaining | read-only | optional | This object reports the current estimate of the number of usage units that remain before this supply is depleted. An installed supply that cannot report such a… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.5.1.2 | Scalarconsumable-life-usage-units | read-only | optional | This object reports current usage units in use by the corresponding CONSUMABLE-LIFE-USAGE-UNITS-REMAINING object. Additional information: This object returns t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.5.1.3 | Scalarconsumable-life-low-threshold | read-write | optional | This object is used to report and modify a threshold value indicating the point in the life of a consumable or supply at which a transition to a LOW state will… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.7 | Scalarconsumable-current-state | read-only | optional | This PML object returns the current state of the particular consumable. cAuthLevel1 - Consumable is at Authentication Level 1 cAuthLevel2 - Consumable is at Au… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.8 | Nodeconsumable-string | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.8.1 | Scalarconsumable-string-information | read-write | optional | This object is used to read and write the string value that describes the consumable information. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.8.2 | Scalarconsumable-string-information-reset | read-write | optional | This object is used to reset (set back to factory default) or read the current status of the corresponding information string. When Set to eResetToDefault, thi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.10 | Scalarconsumable-notification-status | read-write | optional | This object is used to read and write the various status flags supported by this consumable. For Laserjet 4700 MFP the collection bits supported include: cClie… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.11 | Scalarconsumable-pages-printed-with-supply | read-only | optional | This PML object returns the number of pages printed with a cartridge consumable. This PML object returns the value that should be displayed under 'Pages Printe… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.15 | Scalartotal-kilo-pixels-per-cartridge | read-only | optional | Returns the total number of kilo-pixels at 600dpi in the cartridge. That is, the number returned by this object should be multiplied by 1000 to determine the t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.11 | Nodeprint-meter | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.11.1 | Nodeprinter-average | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.11.1.4 | Scalarprinter-average-marking-agent-units-per-gram | read-only | optional | This object is used to read the marking agent units of measure per gram. This is typically a conversion factor for converting pixels of toner to grams. This pi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.11.1.5 | Scalarprinter-average-marking-agent-coverage-actual | read-only | optional | This object is used to read the actual average marking agent coverage for a given color plane. It is a real number that represents percent coverage and will re… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.13 | Nodemenus | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.6 | Nodechannel | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.6.1 | Scalarchannelnumberofchannels | write-only | optional | An indication of how many print data channels the I/O card supports. Additional information: This object is used by the IIO card to tell the peripheral firmwar… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.6.2 | Scalarchannelprinteralert | read-only | optional | Identifies the values of prtAlertIndex, prtAlertSeverityLevel, prtAlertGroup, prtAlertGroupIndex, prtAlertLocation, and prtAlertCode for the latest critical ev… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.7 | Nodetables |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING |