LSERIES-TAPE-LIBRARY-MIB
394 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1211 | Nodestoragetek | |||
| 1.3.6.1.4.1.1211.1 | Nodeproducts | |||
| 1.3.6.1.4.1.1211.1.12 | NodelseriesTapeLibrary | |||
| 1.3.6.1.4.1.1211.1.12.1 | NodelserAgent | |||
| 1.3.6.1.4.1.1211.1.12.1 | NodelserTrapError | An error trap - condition which is critical to machine operation encountered | ||
| 1.3.6.1.4.1.1211.1.12.1.1 | ScalarlserAgentRevision | read-only | mandatory | The firmware version of the embedded agent. |
| 1.3.6.1.4.1.1211.1.12.1.3 | ScalarlserAgentBootDate | read-only | mandatory | The date & time when the agent initialized. |
| 1.3.6.1.4.1.1211.1.12.1.4 | ScalarlserAgentURL | read-only | mandatory | URL for web based management |
| 1.3.6.1.4.1.1211.1.12.1.6 | ScalarlserAgentPort | read-write | mandatory | UDP port number that the agent will listen on |
| 1.3.6.1.4.1.1211.1.12.1.7 | ScalarlserAgentCommunity | read-write | mandatory | The agent default community |
| 1.3.6.1.4.1.1211.1.12.1.8 | NodelserAgentTrapSink | |||
| 1.3.6.1.4.1.1211.1.12.1.8.1 | ScalarlserAgentTrapSinkClear | read-write | mandatory | Set to 2 to clear the trap recipient list. |
| 1.3.6.1.4.1.1211.1.12.1.8.2 | ScalarlserAgentTrapSinkNum | read-only | mandatory | Number of trap recipients in the table |
| 1.3.6.1.4.1.1211.1.12.1.8.3 | TablelserAgentTrapSinkTable | not-accessible | mandatory | Trap recipients table |
| 1.3.6.1.4.1.1211.1.12.1.8.3.1 | RowlserAgentTrapSinkEntry | not-accessible | mandatory | Trap recipients table entry |
| 1.3.6.1.4.1.1211.1.12.1.8.3.1.1 | ColumnlserAgentTrapSinkTableIndex | read-only | mandatory | Index into the trap recipients table |
| 1.3.6.1.4.1.1211.1.12.1.8.3.1.2 | ColumnlserAgentTrapSinkNetName | read-write | mandatory | The recipent's network host name |
| 1.3.6.1.4.1.1211.1.12.1.8.3.1.3 | ColumnlserAgentTrapSinkPort | read-write | mandatory | UDP port for the recipient to receive notification |
| 1.3.6.1.4.1.1211.1.12.1.8.3.1.4 | ColumnlserAgentTrapSinkCommunity | read-write | mandatory | The recipient community |
| 1.3.6.1.4.1.1211.1.12.1.8.3.1.5 | ColumnlserAgentTrapSinkVersion | read-write | mandatory | Supported trap version for the recipient (V2 also includes V1 traps) |
| 1.3.6.1.4.1.1211.1.12.1.8.3.1.6 | ColumnlserAgentTrapSinkClearEntry | read-write | mandatory | Set to 2 to clear/remove the trap recipient entry |
| 1.3.6.1.4.1.1211.1.12.2 | NodelserTrap | |||
| 1.3.6.1.4.1.1211.1.12.2 | NodelserTrapWarning | A warning trap - condition which may need attention has been encountered | ||
| 1.3.6.1.4.1.1211.1.12.2.1 | ScalarlserTrapText | read-only | mandatory | A trap displayString varbind |
| 1.3.6.1.4.1.1211.1.12.2.2 | ScalarlserTrapSeverity | read-write | mandatory | The report level/severity for a TRAP |
| 1.3.6.1.4.1.1211.1.12.3 | NodelserLibrary | |||
| 1.3.6.1.4.1.1211.1.12.3 | NodelserTrapInformation | An information trap - information is presented for activity monitoring | ||
| 1.3.6.1.4.1.1211.1.12.3.1 | ScalarlserLibStkBaseModel | read-only | mandatory | The StorageTek Model Name - see lserLibPersonality for vendor specific model data |
| 1.3.6.1.4.1.1211.1.12.3.2 | ScalarlserLibConfigPassword | write-only | mandatory | Password to enable configuration actions |
| 1.3.6.1.4.1.1211.1.12.3.3 | NodelserLibVersion | |||
| 1.3.6.1.4.1.1211.1.12.3.3.1 | ScalarlserLibVersionFirmRev | read-only | mandatory | The library's embedded firmware version |
| 1.3.6.1.4.1.1211.1.12.3.3.2 | ScalarlserLibVersionFirmDate | read-only | mandatory | The library's embedded firmware build date |
| 1.3.6.1.4.1.1211.1.12.3.3.3 | ScalarlserLibVersionBootRev | read-only | mandatory | The library's boot software/OS version |
| 1.3.6.1.4.1.1211.1.12.3.3.4 | ScalarlserLibVersionFibre | read-only | mandatory | The library's fibre channel driver version |
| 1.3.6.1.4.1.1211.1.12.3.3.5 | ScalarlserLibVersionHardware | read-only | mandatory | The library's controller hardware version |
| 1.3.6.1.4.1.1211.1.12.3.4 | ScalarlserLibSerialNumber | read-only | mandatory | The library serial number |
| 1.3.6.1.4.1.1211.1.12.3.5 | NodelserLibHostInterface | |||
| 1.3.6.1.4.1.1211.1.12.3.5.1 | ScalarlserLibHostInterfaceType | read-only | mandatory | The library's type of host interface |
| 1.3.6.1.4.1.1211.1.12.3.6 | NodelserLibConfig | |||
| 1.3.6.1.4.1.1211.1.12.3.6.1 | ScalarlserLibCfgNumPanels | read-only | mandatory | Number of logical panels |
| 1.3.6.1.4.1.1211.1.12.3.6.2 | ScalarlserLibCfgNumHandCells | read-only | mandatory | Number of logical hands |
| 1.3.6.1.4.1.1211.1.12.3.6.3 | ScalarlserLibCfgMinHandAddr | read-only | mandatory | Minimum element ID of logical hands |
| 1.3.6.1.4.1.1211.1.12.3.6.4 | ScalarlserLibCfgMaxHandAddr | read-only | mandatory | Maximum element ID of logical hands |
| 1.3.6.1.4.1.1211.1.12.3.6.5 | ScalarlserLibCfgNumPlayCells | read-only | mandatory | Number of playground cells |
| 1.3.6.1.4.1.1211.1.12.3.6.6 | ScalarlserLibCfgMinPlayAddr | read-only | mandatory | Minimum element ID of playground cells |
| 1.3.6.1.4.1.1211.1.12.3.6.7 | ScalarlserLibCfgMaxPlayAddr | read-only | mandatory | Maximum element ID of playground cells |
| 1.3.6.1.4.1.1211.1.12.3.6.8 | ScalarlserLibCfgNumCaps | read-only | mandatory | Number of cartridge access ports (CAPs) |
| 1.3.6.1.4.1.1211.1.12.3.6.9 | ScalarlserLibCfgNumCapColumns | read-only | mandatory | Number of columns within CAPs |
| 1.3.6.1.4.1.1211.1.12.3.6.10 | ScalarlserLibCfgNumCapCells | read-only | mandatory | Number of CAP cells |
| 1.3.6.1.4.1.1211.1.12.3.6.11 | ScalarlserLibCfgMinCapAddr | read-only | mandatory | Minimum element ID of CAP cells |
| 1.3.6.1.4.1.1211.1.12.3.6.12 | ScalarlserLibCfgMaxCapAddr | read-only | mandatory | Maximum element ID of CAP cells |
| 1.3.6.1.4.1.1211.1.12.3.6.13 | ScalarlserLibCfgNumDriveColumns | read-only | mandatory | Number of drive columns |
| 1.3.6.1.4.1.1211.1.12.3.6.14 | ScalarlserLibCfgNumDrives | read-only | mandatory | Number of tape drives |
| 1.3.6.1.4.1.1211.1.12.3.6.15 | ScalarlserLibCfgMinDriveAddr | read-only | mandatory | Minimum element ID of tape drives |
| 1.3.6.1.4.1.1211.1.12.3.6.16 | ScalarlserLibCfgMaxDriveAddr | read-only | mandatory | Maximum element ID of tape drives |
| 1.3.6.1.4.1.1211.1.12.3.6.17 | ScalarlserLibCfgNumStorageCells | read-only | mandatory | Number of storage cells |
| 1.3.6.1.4.1.1211.1.12.3.6.18 | ScalarlserLibCfgMinStorageAddr | read-only | mandatory | Minimum element ID of storage cells |
| 1.3.6.1.4.1.1211.1.12.3.6.19 | ScalarlserLibCfgMaxStorageAddr | read-only | mandatory | Maximum element ID of storage cells |
| 1.3.6.1.4.1.1211.1.12.3.6.20 | ScalarlserLibCfgNumPtps | read-only | mandatory | Number of pass through ports (PTPs) |
| 1.3.6.1.4.1.1211.1.12.3.6.21 | ScalarlserLibCfgNumPtpColumns | read-only | mandatory | Number of columns within PTPs |
| 1.3.6.1.4.1.1211.1.12.3.6.22 | ScalarlserLibCfgNumPtpCells | read-only | mandatory | Number of PTP cells |
| 1.3.6.1.4.1.1211.1.12.3.6.23 | ScalarlserLibCfgMinPtpAddr | read-only | mandatory | Minimum element ID of PTP cells |
| 1.3.6.1.4.1.1211.1.12.3.6.24 | ScalarlserLibCfgMaxPtpAddr | read-only | mandatory | Maximum element ID of PTP cells |
| 1.3.6.1.4.1.1211.1.12.3.7 | ScalarlserLibState | read-only | mandatory | The library's state |
| 1.3.6.1.4.1.1211.1.12.3.8 | ScalarlserLibStatusEnum | read-only | mandatory | The Library's operational state - reported as an enumeration |
| 1.3.6.1.4.1.1211.1.12.3.9 | NodelserLibLog | |||
| 1.3.6.1.4.1.1211.1.12.3.9.1 | ScalarlserLibLogClear | read-write | mandatory | Set to 2 to clear the event log |
| 1.3.6.1.4.1.1211.1.12.3.9.2 | ScalarlserLibLogNumFscs | read-only | mandatory | Number of log entries in the log table |
| 1.3.6.1.4.1.1211.1.12.3.9.3 | TablelserLibLogTable | not-accessible | mandatory | Event Log Table |
| 1.3.6.1.4.1.1211.1.12.3.9.3.1 | RowlserLibLogEntry | not-accessible | mandatory | FSC log table entry |
| 1.3.6.1.4.1.1211.1.12.3.9.3.1.1 | ColumnlserLibLogTableIndex | read-only | mandatory | Index into the log table |
| 1.3.6.1.4.1.1211.1.12.3.9.3.1.2 | ColumnlserLibLogFscNumber | read-only | mandatory | The fault symptom code (FSC) of the log entry |
| 1.3.6.1.4.1.1211.1.12.3.9.3.1.3 | ColumnlserLibLogMechanism | read-only | mandatory | The mechanism associated with the log entry |
| 1.3.6.1.4.1.1211.1.12.3.9.3.1.4 | ColumnlserLibLogFscCount | read-only | mandatory | The number of occurances of the log entry |
| 1.3.6.1.4.1.1211.1.12.3.9.3.1.5 | ColumnlserLibLogDateTime | read-only | mandatory | Log entry's date/time in 'MM:DD:YYYY HH:MM:SS' form |
| 1.3.6.1.4.1.1211.1.12.3.9.3.1.6 | ColumnlserLibLogSummary | read-only | mandatory | Summary description of the log event |
| 1.3.6.1.4.1.1211.1.12.3.9.3.1.7 | ColumnlserLibLogText | read-only | mandatory | Description of the log event |
| 1.3.6.1.4.1.1211.1.12.3.9.3.1.8 | ColumnlserLibLogClearEntry | read-write | mandatory | Set to 2 to clear/remove the log entry |
| 1.3.6.1.4.1.1211.1.12.3.9.3.1.9 | ColumnlserLibLogSeverity | read-only | mandatory | Enumeration indicating severity of the log event |
| 1.3.6.1.4.1.1211.1.12.3.10 | ScalarlserLibDeviceID | read-write | mandatory | The library's SCSI or Fibre Bus ID |
| 1.3.6.1.4.1.1211.1.12.3.11 | ScalarlserLibFastLoad | read-write | mandatory | The library's fast load option |
| 1.3.6.1.4.1.1211.1.12.3.12 | NodelserLibLocation | |||
| 1.3.6.1.4.1.1211.1.12.3.12.1 | ScalarlserLibLocatContact | read-write | mandatory | The primary contact for administration |
| 1.3.6.1.4.1.1211.1.12.3.12.2 | ScalarlserLibLocatStreet | read-write | mandatory | Location/Site - street address |
| 1.3.6.1.4.1.1211.1.12.3.12.3 | ScalarlserLibLocatState | read-write | mandatory | Location/Site - state/province |
| 1.3.6.1.4.1.1211.1.12.3.12.4 | ScalarlserLibLocatZip | read-write | mandatory | Location/Site - zip code (or other data) |
| 1.3.6.1.4.1.1211.1.12.3.12.5 | ScalarlserLibLocatCountry | read-write | mandatory | Location/Site - country |
| 1.3.6.1.4.1.1211.1.12.3.12.6 | ScalarlserLibLocatDescr | read-write | mandatory | Location/site - description/misc |
| 1.3.6.1.4.1.1211.1.12.3.12.7 | ScalarlserLibLocatCity | read-write | mandatory | Location/Site - city |
| 1.3.6.1.4.1.1211.1.12.3.13 | NodelserLibNetwork | |||
| 1.3.6.1.4.1.1211.1.12.3.13.1 | ScalarlserLibNetworkIpAddr | read-write | mandatory | The library's IP Address |
| 1.3.6.1.4.1.1211.1.12.3.13.2 | ScalarlserLibNetworkGateway | read-write | mandatory | The library network's internet gateway |
| 1.3.6.1.4.1.1211.1.12.3.13.3 | ScalarlserLibNetworkEthAddr | read-only | mandatory | The library's physical 48 bit ethernet address |
| 1.3.6.1.4.1.1211.1.12.3.13.4 | ScalarlserLibNetworkName | read-write | mandatory | The library's network host name |
| 1.3.6.1.4.1.1211.1.12.3.13.5 | ScalarlserLibNetworkNetmask | read-write | mandatory | The library's network internet address netmask |
| 1.3.6.1.4.1.1211.1.12.3.13.6 | ScalarlserLibNetworkFibrePresent | read-only | mandatory | Indication of library's fibre channel interface |
| 1.3.6.1.4.1.1211.1.12.3.13.7 | ScalarlserLibNetworkFibreID | read-only | mandatory | World wide ID of fibre channel interface |
| 1.3.6.1.4.1.1211.1.12.3.13.8 | ScalarlserLibNetworkFibreNumPorts | read-only | mandatory | Number of Fibre ports installed in the library |
| 1.3.6.1.4.1.1211.1.12.3.13.9 | ScalarlserLibNetworkDhcpEnabled | read-write | mandatory | DHCP IP address/name client lookup service status |
| 1.3.6.1.4.1.1211.1.12.3.13.10 | ScalarlserLibNetworkDomainName | read-write | mandatory | The library's network domain name |
| 1.3.6.1.4.1.1211.1.12.3.13.11 | ScalarlserLibNetworkPrimaryDNS | read-write | mandatory | The library network's primary DNS server |
| 1.3.6.1.4.1.1211.1.12.3.13.12 | ScalarlserLibNetworkSecondaryDNS | read-write | mandatory | The library network's secondary DNS server |
| 1.3.6.1.4.1.1211.1.12.3.14 | NodelserLibStatistics | |||
| 1.3.6.1.4.1.1211.1.12.3.14.1 | ScalarlserLibStatsNumIPL | read-only | mandatory | The number of machine initializations |
| 1.3.6.1.4.1.1211.1.12.3.14.2 | ScalarlserLibStatsNumDoorOpens | read-only | mandatory | The number of times the service door has been opened |
| 1.3.6.1.4.1.1211.1.12.3.14.3 | ScalarlserLibStatsNumGetRetries | read-only | mandatory | The overall number of get retries |
| 1.3.6.1.4.1.1211.1.12.3.14.4 | ScalarlserLibStatsNumGetFails | read-only | mandatory | The overall number of get failures |
| 1.3.6.1.4.1.1211.1.12.3.14.5 | ScalarlserLibStatsNumPutRetries | read-only | mandatory | The overall number of put retries |
| 1.3.6.1.4.1.1211.1.12.3.14.6 | ScalarlserLibStatsNumPutFails | read-only | mandatory | The overall number of put failures |
| 1.3.6.1.4.1.1211.1.12.3.14.7 | ScalarlserLibStatsNumLabelRetries | read-only | mandatory | The overall number of label read retries |
| 1.3.6.1.4.1.1211.1.12.3.14.8 | ScalarlserLibStatsNumLabelFails | read-only | mandatory | The overall number of label read failures |
| 1.3.6.1.4.1.1211.1.12.3.14.9 | ScalarlserLibStatsNumTargetRetries | read-only | mandatory | The overall number of target read retries |
| 1.3.6.1.4.1.1211.1.12.3.14.10 | ScalarlserLibStatsNumTargetFails | read-only | mandatory | The overall number of target read failures |
| 1.3.6.1.4.1.1211.1.12.3.14.11 | ScalarlserLibStatsNumMoves | read-only | mandatory | The overall number of cartridge moves |
| 1.3.6.1.4.1.1211.1.12.3.14.12 | ScalarlserLibStatsNumMounts | read-only | mandatory | The overall number of mounts |
| 1.3.6.1.4.1.1211.1.12.3.14.13 | ScalarlserLibStatsNumTargetReads | read-only | mandatory | The overall number of target reads |
| 1.3.6.1.4.1.1211.1.12.3.14.14 | ScalarlserLibStatsNumEmptyReads | read-only | mandatory | The overall number of empty cell reads |
| 1.3.6.1.4.1.1211.1.12.3.14.15 | ScalarlserLibStatsNumLabelReads | read-only | mandatory | The overall number of label reads |
| 1.3.6.1.4.1.1211.1.12.3.14.16 | NodelserLibStats5minuteSample | |||
| 1.3.6.1.4.1.1211.1.12.3.14.16.1 | ScalarlserLibStats5minSampleCount | read-only | mandatory | The overall number of 5 minute usage samples |
| 1.3.6.1.4.1.1211.1.12.3.14.16.2 | ScalarlserLibStats5minIdle | read-only | mandatory | The number of sample periods where there were no drive mounts |
| 1.3.6.1.4.1.1211.1.12.3.14.16.3 | ScalarlserLibStats5min1to25 | read-only | mandatory | The number of sample periods where 1-25 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.16.4 | ScalarlserLibStats5min26to50 | read-only | mandatory | The number of sample periods where 26-50 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.16.5 | ScalarlserLibStats5min51to75 | read-only | mandatory | The number of sample periods where 51-75 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.16.6 | ScalarlserLibStats5min76to100 | read-only | mandatory | The number of sample periods where 76-100 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.16.7 | ScalarlserLibStats5min101to125 | read-only | mandatory | The number of sample periods where 101-125 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.16.8 | ScalarlserLibStats5min126to150 | read-only | mandatory | The number of sample periods where 126-150 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.16.9 | ScalarlserLibStats5min151to175 | read-only | mandatory | The number of sample periods where 151-175 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.16.10 | ScalarlserLibStats5min176to200 | read-only | mandatory | The number of sample periods where 176-200 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.16.11 | ScalarlserLibStats5min201to225 | read-only | mandatory | The number of sample periods where 201-225 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.16.12 | ScalarlserLibStats5min226to250 | read-only | mandatory | The number of sample periods where 226-250 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.16.13 | ScalarlserLibStats5min251to300 | read-only | mandatory | The number of sample periods where 251-300 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.16.14 | ScalarlserLibStats5min301to350 | read-only | mandatory | The number of sample periods where 301-350 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.16.15 | ScalarlserLibStats5min351to400 | read-only | mandatory | The number of sample periods where 351-400 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.16.16 | ScalarlserLibStats5min401to450 | read-only | mandatory | The number of sample periods where 401-450 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.16.17 | ScalarlserLibStats5min451to500 | read-only | mandatory | The number of sample periods where 451-500 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.16.18 | ScalarlserLibStats5min501to550 | read-only | mandatory | The number of sample periods where 501-550 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.16.19 | ScalarlserLibStats5min551to600 | read-only | mandatory | The number of sample periods where 551-600 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.16.20 | ScalarlserLibStats5min601to650 | read-only | mandatory | The number of sample periods where 601-650 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.16.21 | ScalarlserLibStats5min651to700 | read-only | mandatory | The number of sample periods where 651-700 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.16.22 | ScalarlserLibStats5minOver700 | read-only | mandatory | The number of sample periods where over 700 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.17 | NodelserLibStats15minuteSample | |||
| 1.3.6.1.4.1.1211.1.12.3.14.17.1 | ScalarlserLibStats15minSampleCount | read-only | mandatory | The overall number of 15 minute usage samples |
| 1.3.6.1.4.1.1211.1.12.3.14.17.2 | ScalarlserLibStats15minIdle | read-only | mandatory | The number of sample periods where there were no drive mounts |
| 1.3.6.1.4.1.1211.1.12.3.14.17.3 | ScalarlserLibStats15min1to25 | read-only | mandatory | The number of sample periods where 1-25 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.17.4 | ScalarlserLibStats15min26to50 | read-only | mandatory | The number of sample periods where 26-50 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.17.5 | ScalarlserLibStats15min51to75 | read-only | mandatory | The number of sample periods where 51-75 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.17.6 | ScalarlserLibStats15min76to100 | read-only | mandatory | The number of sample periods where 76-100 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.17.7 | ScalarlserLibStats15min101to125 | read-only | mandatory | The number of sample periods where 101-125 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.17.8 | ScalarlserLibStats15min126to150 | read-only | mandatory | The number of sample periods where 126-150 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.17.9 | ScalarlserLibStats15min151to175 | read-only | mandatory | The number of sample periods where 151-175 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.17.10 | ScalarlserLibStats15min176to200 | read-only | mandatory | The number of sample periods where 176-200 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.17.11 | ScalarlserLibStats15min201to225 | read-only | mandatory | The number of sample periods where 201-225 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.17.12 | ScalarlserLibStats15min226to250 | read-only | mandatory | The number of sample periods where 226-250 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.17.13 | ScalarlserLibStats15min251to300 | read-only | mandatory | The number of sample periods where 251-300 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.17.14 | ScalarlserLibStats15min301to350 | read-only | mandatory | The number of sample periods where 301-350 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.17.15 | ScalarlserLibStats15min351to400 | read-only | mandatory | The number of sample periods where 351-400 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.17.16 | ScalarlserLibStats15min401to450 | read-only | mandatory | The number of sample periods where 401-450 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.17.17 | ScalarlserLibStats15min451to500 | read-only | mandatory | The number of sample periods where 451-500 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.17.18 | ScalarlserLibStats15min501to550 | read-only | mandatory | The number of sample periods where 501-550 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.17.19 | ScalarlserLibStats15min551to600 | read-only | mandatory | The number of sample periods where 551-600 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.17.20 | ScalarlserLibStats15min601to650 | read-only | mandatory | The number of sample periods where 601-650 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.17.21 | ScalarlserLibStats15min651to700 | read-only | mandatory | The number of sample periods where 651-700 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.17.22 | ScalarlserLibStats15minOver700 | read-only | mandatory | The number of sample periods where over 700 mounts were performed |
| 1.3.6.1.4.1.1211.1.12.3.14.18 | ScalarlserLibStatsGlobalClear | read-write | mandatory | Clear global statistics by writing value of clear(2) |
| 1.3.6.1.4.1.1211.1.12.3.14.19 | NodelserLibMediaErrors | |||
| 1.3.6.1.4.1.1211.1.12.3.14.19.1 | ScalarlserMediaErrorCount | read-only | mandatory | Number of media statistics in the table |
| 1.3.6.1.4.1.1211.1.12.3.14.19.2 | TablelserLibMediaErrorTable | not-accessible | mandatory | A table of media statistics |
| 1.3.6.1.4.1.1211.1.12.3.14.19.2.1 | RowlserLibMediaErrorEntry | not-accessible | mandatory | A media error statistic |
| 1.3.6.1.4.1.1211.1.12.3.14.19.2.1.1 | ColumnlserMediaErrorIndex | read-only | mandatory | Index into the media statistic table |
| 1.3.6.1.4.1.1211.1.12.3.14.19.2.1.2 | ColumnlserMediaErrorTapeLabel | read-only | mandatory | The tape label of media statistic |
| 1.3.6.1.4.1.1211.1.12.3.14.19.2.1.3 | ColumnlserMediaErrorDriveSerialNum | read-only | mandatory | The drive serial number of media statistic |
| 1.3.6.1.4.1.1211.1.12.3.14.19.2.1.4 | ColumnlserMediaErrorDateTime | read-only | mandatory | Log entry's date/time in 'MM:DD:YYYY HH:MM:SS' form |
| 1.3.6.1.4.1.1211.1.12.3.14.19.2.1.5 | ColumnlserLibMediaErrorEnum | read-only | mandatory | The type of media error - reported as an enumeration |
| 1.3.6.1.4.1.1211.1.12.3.14.19.2.1.6 | ColumnlserMediaErrorOccurrenceCount | read-only | mandatory | Occurrence count for media statistic |
| 1.3.6.1.4.1.1211.1.12.3.15 | NodelserLibDate | |||
| 1.3.6.1.4.1.1211.1.12.3.15.1 | ScalarlserLibDateMonth | read-write | mandatory | Date: month |
| 1.3.6.1.4.1.1211.1.12.3.15.2 | ScalarlserLibDateDay | read-write | mandatory | Date: day of the month |
| 1.3.6.1.4.1.1211.1.12.3.15.3 | ScalarlserLibDateYear | read-write | mandatory | Date: year (reported with 4 digits) |
| 1.3.6.1.4.1.1211.1.12.3.15.4 | ScalarlserLibDateHour | read-write | mandatory | Time: hour |
| 1.3.6.1.4.1.1211.1.12.3.15.5 | ScalarlserLibDateMinute | read-write | mandatory | Time: minute |
| 1.3.6.1.4.1.1211.1.12.3.15.6 | ScalarlserLibDateSecond | read-write | mandatory | Time: second |
| 1.3.6.1.4.1.1211.1.12.3.15.7 | ScalarlserLibDateString | read-only | mandatory | Library's date/time in 'MM:DD:YYYY HH:MM:SS' form |
| 1.3.6.1.4.1.1211.1.12.3.16 | NodelserLibPersonality | |||
| 1.3.6.1.4.1.1211.1.12.3.16.1 | ScalarlserLibPersonVendor | read-only | mandatory | The library vendor name |
| 1.3.6.1.4.1.1211.1.12.3.16.2 | ScalarlserLibPersonModel | read-only | mandatory | The library model name |
| 1.3.6.1.4.1.1211.1.12.3.16.3 | ScalarlserLibPersonWebEnabled | read-only | mandatory | Web Management feature status |
| 1.3.6.1.4.1.1211.1.12.3.16.4 | ScalarlserLibPersonLibSize | read-only | mandatory | Library size configuration |
| 1.3.6.1.4.1.1211.1.12.3.17 | NodelserLibCleaning | |||
| 1.3.6.1.4.1.1211.1.12.3.17.1 | ScalarlserLibCleanEnabled | read-write | mandatory | Auto clean feature configuration. Not all libraries support this feature, please refer to user documentation. |
| 1.3.6.1.4.1.1211.1.12.3.17.2 | ScalarlserLibCleanNumCartTypes | read-only | mandatory | Number of unique cartridge types supported |
| 1.3.6.1.4.1.1211.1.12.3.17.3 | TablelserLibCleanWarnTable | not-accessible | mandatory | Table of clean count warning thresholds |
| 1.3.6.1.4.1.1211.1.12.3.17.3.1 | RowlserLibCleanWarnEntry | not-accessible | mandatory | Clean count warning thresh table entry |
| 1.3.6.1.4.1.1211.1.12.3.17.3.1.1 | ColumnlserLibCleanWarnIndex | read-only | mandatory | Index into clean warning thresh table |
| 1.3.6.1.4.1.1211.1.12.3.17.3.1.2 | ColumnlserLibCleanCartType | read-only | mandatory | Name of cartridge type (DLT, 9840, etc) |
| 1.3.6.1.4.1.1211.1.12.3.17.3.1.3 | ColumnlserLibCleanWarnCount | read-write | mandatory | Configured warn count threshold |
| 1.3.6.1.4.1.1211.1.12.3.17.4 | ScalarlserLibCleanNumCarts | read-only | mandatory | Count of the clean cartridges in the library |
| 1.3.6.1.4.1.1211.1.12.3.17.5 | TablelserLibCleanCartTable | not-accessible | mandatory | A table of cleaning cartridges in the library |
| 1.3.6.1.4.1.1211.1.12.3.17.5.1 | RowlserLibCleanCartEntry | not-accessible | mandatory | A cleaning cartridge |
| 1.3.6.1.4.1.1211.1.12.3.17.5.1.1 | ColumnlserCleanCartIndex | read-only | mandatory | Integer index into the cleaning cart table |
| 1.3.6.1.4.1.1211.1.12.3.17.5.1.2 | ColumnlserCleanCartLabel | read-only | mandatory | The clean cartridge label |
| 1.3.6.1.4.1.1211.1.12.3.17.5.1.3 | ColumnlserCleanCartType | read-only | mandatory | The clean cartridge type |
| 1.3.6.1.4.1.1211.1.12.3.17.5.1.4 | ColumnlserCleanCartLocationElementID | read-only | mandatory | The clean cartridge location - element ID |
| 1.3.6.1.4.1.1211.1.12.3.17.5.1.5 | ColumnlserCleanCartHostAccessible | read-only | mandatory | Indication of host accessible status |
| 1.3.6.1.4.1.1211.1.12.3.17.5.1.6 | ColumnlserCleanCartUsageCount | read-only | mandatory | Number of times that the cartridge has been used to clean |
| 1.3.6.1.4.1.1211.1.12.4 | NodelserDrives | |||
| 1.3.6.1.4.1.1211.1.12.4 | NodelserTrapConfiguration | A configuration trap - reporting machine configuration activity | ||
| 1.3.6.1.4.1.1211.1.12.4.1 | ScalarlserDriveCount | read-only | mandatory | Count of the drives in the drive table |
| 1.3.6.1.4.1.1211.1.12.4.2 | TablelserDriveTable | not-accessible | mandatory | A table of drives |
| 1.3.6.1.4.1.1211.1.12.4.2.1 | RowlserDriveEntry | not-accessible | mandatory | A tape drive |
| 1.3.6.1.4.1.1211.1.12.4.2.1.1 | ColumnlserDriveIndex | read-only | mandatory | Integer index into the drive table |
| 1.3.6.1.4.1.1211.1.12.4.2.1.2 | ColumnlserDriveElementID | read-only | mandatory | Element ID of the drive |
| 1.3.6.1.4.1.1211.1.12.4.2.1.3 | ColumnlserDriveRowInLib | read-only | mandatory | Physical row position of the drive |
| 1.3.6.1.4.1.1211.1.12.4.2.1.4 | ColumnlserDriveColInLib | read-only | mandatory | Physical column position of the drive |
| 1.3.6.1.4.1.1211.1.12.4.2.1.5 | ColumnlserDriveType | read-only | mandatory | The drive's type, e.g. STK9840, DLT7000 |
| 1.3.6.1.4.1.1211.1.12.4.2.1.6 | ColumnlserDriveVendor | read-only | mandatory | The drive's vendor, e.g. STK, Quantum |
| 1.3.6.1.4.1.1211.1.12.4.2.1.7 | ColumnlserDriveSerialNum | read-only | mandatory | The drive's serial number |
| 1.3.6.1.4.1.1211.1.12.4.2.1.8 | ColumnlserDriveInterfaceType | read-only | mandatory | The drive's physical data transport type |
| 1.3.6.1.4.1.1211.1.12.4.2.1.9 | ColumnlserDriveID | read-write | mandatory | The drive's SCSI ID or Fibre Port assignment |
| 1.3.6.1.4.1.1211.1.12.4.2.1.10 | ColumnlserDriveState | read-only | mandatory | The drive's state (empty, loaded, needs cleaning, etc) |
| 1.3.6.1.4.1.1211.1.12.4.2.1.11 | ColumnlserDriveStatusEnum | read-only | mandatory | The drive's operational status in enumerated form |
| 1.3.6.1.4.1.1211.1.12.4.2.1.12 | ColumnlserDriveCodeVer | read-only | mandatory | The drive's code version |
| 1.3.6.1.4.1.1211.1.12.4.2.1.13 | ColumnlserDriveVersion | read-only | mandatory | The drive's version |
| 1.3.6.1.4.1.1211.1.12.4.2.1.14 | ColumnlserDriveFirmwareVer | read-only | mandatory | The drive's firmware version |
| 1.3.6.1.4.1.1211.1.12.4.2.1.15 | ColumnlserDriveGetRetries | read-only | mandatory | The number of mount retries performed to the drive |
| 1.3.6.1.4.1.1211.1.12.4.2.1.16 | ColumnlserDrivePutRetries | read-only | mandatory | The number of dismount retries performed to the drive |
| 1.3.6.1.4.1.1211.1.12.4.2.1.17 | ColumnlserDriveCommandClean | read-write | mandatory | Signal to clean/cancel cleaning of the drive |
| 1.3.6.1.4.1.1211.1.12.4.2.1.18 | ColumnlserDriveCellStatusEnum | read-only | mandatory | The status of the drive's cell presented as an enumeration |
| 1.3.6.1.4.1.1211.1.12.4.2.1.19 | ColumnlserDriveCellStatusText | read-only | mandatory | The status of the drive's cell |
| 1.3.6.1.4.1.1211.1.12.4.2.1.20 | ColumnlserDriveCellContentLabel | read-only | mandatory | The label of the cart in the drive (zero len string if empty, '??????' if unreadable) |
| 1.3.6.1.4.1.1211.1.12.4.2.1.21 | ColumnlserDriveCellContentType | read-only | mandatory | The type of cartridge in the drive (zero len string if empty) |
| 1.3.6.1.4.1.1211.1.12.4.2.1.24 | ColumnlserDriveIdleSeconds | read-only | mandatory | Number of seconds that the drive has been idle (unmounted) |
| 1.3.6.1.4.1.1211.1.12.4.2.1.25 | ColumnlserDriveNumMounts | read-only | mandatory | Number of mounts to the drive |
| 1.3.6.1.4.1.1211.1.12.4.2.1.26 | ColumnlserDriveUsageSampleCount | read-only | mandatory | Total number of usage samples for this drive |
| 1.3.6.1.4.1.1211.1.12.4.2.1.27 | ColumnlserDriveUsageMinimum | read-only | mandatory | Number of samples where drive usage was less than 30 seconds |
| 1.3.6.1.4.1.1211.1.12.4.2.1.28 | ColumnlserDriveUsage5min | read-only | mandatory | Number of samples where drive usage was between 30 secs and 5 minutes |
| 1.3.6.1.4.1.1211.1.12.4.2.1.29 | ColumnlserDriveUsage5to10 | read-only | mandatory | Number of samples where drive usage was between 5 and 10 minutes |
| 1.3.6.1.4.1.1211.1.12.4.2.1.30 | ColumnlserDriveUsage10to30 | read-only | mandatory | Number of samples where drive usage was between 10 and 30 minutes |
| 1.3.6.1.4.1.1211.1.12.4.2.1.31 | ColumnlserDriveUsage30to60 | read-only | mandatory | Number of samples where drive usage was between 30 and 60 minutes |
| 1.3.6.1.4.1.1211.1.12.4.2.1.32 | ColumnlserDriveUsageMaximum | read-only | mandatory | Number of samples where drive usage was greater than 60 minutes |
| 1.3.6.1.4.1.1211.1.12.4.3 | ScalarlserDriveFibreCount | read-only | mandatory | Count of drives in the fibre drive table |
| 1.3.6.1.4.1.1211.1.12.4.4 | TablelserDriveFibreTable | not-accessible | mandatory | A table of fibre drives |
| 1.3.6.1.4.1.1211.1.12.4.4.1 | RowlserDriveFibreEntry | not-accessible | mandatory | A fibre drive |
| 1.3.6.1.4.1.1211.1.12.4.4.1.1 | ColumnlserDriveFibreIndex | read-only | mandatory | Integer index into the fibre drive table |
| 1.3.6.1.4.1.1211.1.12.4.4.1.2 | ColumnlserDriveFibreSerialNum | read-only | mandatory | The drive's serial number |
| 1.3.6.1.4.1.1211.1.12.4.4.1.3 | ColumnlserDriveFibreNodeName | read-only | mandatory | Drive's fibre node name |
| 1.3.6.1.4.1.1211.1.12.4.4.1.4 | ColumnlserDriveFibrePortCount | read-only | mandatory | The number of active ports in the drive |
| 1.3.6.1.4.1.1211.1.12.4.4.1.5 | ColumnlserDriveFibrePortAWWN | read-only | mandatory | Port A - World wide name |
| 1.3.6.1.4.1.1211.1.12.4.4.1.6 | ColumnlserDriveFibrePortAAddressingMode | read-only | mandatory | PortA's addressing mode |
| 1.3.6.1.4.1.1211.1.12.4.4.1.7 | ColumnlserDriveFibrePortAPortEnabled | read-only | mandatory | Port A - is port enabled |
| 1.3.6.1.4.1.1211.1.12.4.4.1.8 | ColumnlserDriveFibrePortALoopId | read-only | mandatory | Port A - loop id |
| 1.3.6.1.4.1.1211.1.12.4.4.1.9 | ColumnlserDriveFibrePortAPortSpeed | read-only | mandatory | Port A - port speed |
| 1.3.6.1.4.1.1211.1.12.4.4.1.10 | ColumnlserDriveFibrePortBWWN | read-only | mandatory | Port B - World wide name |
| 1.3.6.1.4.1.1211.1.12.4.4.1.11 | ColumnlserDriveFibrePortBAddressingMode | read-only | mandatory | Port B - is hard addressed |
| 1.3.6.1.4.1.1211.1.12.4.4.1.12 | ColumnlserDriveFibrePortBPortEnabled | read-only | mandatory | Port B - is port enabled |
| 1.3.6.1.4.1.1211.1.12.4.4.1.13 | ColumnlserDriveFibrePortBLoopId | read-only | mandatory | Port B - Loop id |
| 1.3.6.1.4.1.1211.1.12.4.4.1.14 | ColumnlserDriveFibrePortBPortSpeed | read-only | mandatory | Port B - Port speed |
| 1.3.6.1.4.1.1211.1.12.4.5 | ScalarlserDriveWWNEnabled | read-only | mandatory | The library's World Wide Name option. Can only be set in CLI, please refer to user documentation. |
| 1.3.6.1.4.1.1211.1.12.5 | NodelserCaps | |||
| 1.3.6.1.4.1.1211.1.12.5.1 | ScalarlserCapCount | read-only | mandatory | Count of the CAPs in the CAP table |
| 1.3.6.1.4.1.1211.1.12.5.2 | TablelserCapTable | not-accessible | mandatory | A table of cartridge access ports |
| 1.3.6.1.4.1.1211.1.12.5.2.1 | RowlserCapEntry | not-accessible | mandatory | A cartridge access port (CAP) |
| 1.3.6.1.4.1.1211.1.12.5.2.1.1 | ColumnlserCapIndex | read-only | mandatory | Integer index into the CAP table |
| 1.3.6.1.4.1.1211.1.12.5.2.1.2 | ColumnlserCapAccessibility | read-only | mandatory | The accessibility of a CAP (open allow/prevent) |
| 1.3.6.1.4.1.1211.1.12.5.2.1.3 | ColumnlserCapAccessStateEnum | read-only | mandatory | The access state of the cap presented as an enumeration |
| 1.3.6.1.4.1.1211.1.12.5.2.1.4 | ColumnlserCapState | read-only | mandatory | The physical state of the CAP |
| 1.3.6.1.4.1.1211.1.12.5.2.1.5 | ColumnlserCapStatusEnum | read-only | mandatory | The operational status of the CAP presented as an enumeration |
| 1.3.6.1.4.1.1211.1.12.5.2.1.8 | ColumnlserCapUsageGetSampleCount | read-only | mandatory | Number of usage samples for this CAP for gets |
| 1.3.6.1.4.1.1211.1.12.5.2.1.9 | ColumnlserCapUsageGetIdle | read-only | mandatory | Number of samples where the cap was idle for gets |
| 1.3.6.1.4.1.1211.1.12.5.2.1.10 | ColumnlserCapUsageGet1 | read-only | mandatory | Number of samples where the cap was used 1 time for gets |
| 1.3.6.1.4.1.1211.1.12.5.2.1.11 | ColumnlserCapUsageGet2 | read-only | mandatory | Number of samples where the cap was used 2 times for gets |
| 1.3.6.1.4.1.1211.1.12.5.2.1.12 | ColumnlserCapUsageGet3 | read-only | mandatory | Number of samples where the cap was used 3 times for gets |
| 1.3.6.1.4.1.1211.1.12.5.2.1.13 | ColumnlserCapUsageGet4 | read-only | mandatory | Number of samples where the cap was used 4 times for gets |
| 1.3.6.1.4.1.1211.1.12.5.2.1.14 | ColumnlserCapUsageGet5 | read-only | mandatory | Number of samples where the cap was used 5 times for gets |
| 1.3.6.1.4.1.1211.1.12.5.2.1.15 | ColumnlserCapUsageGet6to10 | read-only | mandatory | Number of samples where the cap was used 6-10 times for gets |
| 1.3.6.1.4.1.1211.1.12.5.2.1.16 | ColumnlserCapUsageGet11to15 | read-only | mandatory | Number of samples where the cap was used 11-15 times for gets |
| 1.3.6.1.4.1.1211.1.12.5.2.1.17 | ColumnlserCapUsageGet16to20 | read-only | mandatory | Number of samples where the cap was used 16-20 times for gets |
| 1.3.6.1.4.1.1211.1.12.5.2.1.18 | ColumnlserCapUsageGet21toMax | read-only | mandatory | Number of samples where the cap was used more than 20 times for gets |
| 1.3.6.1.4.1.1211.1.12.5.2.1.19 | ColumnlserCapUsagePutSampleCount | read-only | mandatory | Number of usage samples for this CAP for puts |
| 1.3.6.1.4.1.1211.1.12.5.2.1.20 | ColumnlserCapUsagePutIdle | read-only | mandatory | Number of samples where the cap was idle for puts |
| 1.3.6.1.4.1.1211.1.12.5.2.1.21 | ColumnlserCapUsagePut1 | read-only | mandatory | Number of samples where the cap was used 1 time for puts |
| 1.3.6.1.4.1.1211.1.12.5.2.1.22 | ColumnlserCapUsagePut2 | read-only | mandatory | Number of samples where the cap was used 2 times for puts |
| 1.3.6.1.4.1.1211.1.12.5.2.1.23 | ColumnlserCapUsagePut3 | read-only | mandatory | Number of samples where the cap was used 3 times for puts |
| 1.3.6.1.4.1.1211.1.12.5.2.1.24 | ColumnlserCapUsagePut4 | read-only | mandatory | Number of samples where the cap was used 4 times for puts |
| 1.3.6.1.4.1.1211.1.12.5.2.1.25 | ColumnlserCapUsagePut5 | read-only | mandatory | Number of samples where the cap was used 5 times for puts |
| 1.3.6.1.4.1.1211.1.12.5.2.1.26 | ColumnlserCapUsagePut6to10 | read-only | mandatory | Number of samples where the cap was used 6-10 times for puts |
| 1.3.6.1.4.1.1211.1.12.5.2.1.27 | ColumnlserCapUsagePut11to15 | read-only | mandatory | Number of samples where the cap was used 11-15 times for puts |
| 1.3.6.1.4.1.1211.1.12.5.2.1.28 | ColumnlserCapUsagePut16to20 | read-only | mandatory | Number of samples where the cap was used 16-20 times for puts |
| 1.3.6.1.4.1.1211.1.12.5.2.1.29 | ColumnlserCapUsagePut21toMax | read-only | mandatory | Number of samples where the cap was used more than 20 times for puts |
| 1.3.6.1.4.1.1211.1.12.5.2.1.30 | ColumnlserCapName | read-only | mandatory | The CAP name |
| 1.3.6.1.4.1.1211.1.12.6 | NodelserPassThru | |||
| 1.3.6.1.4.1.1211.1.12.6.1 | ScalarlserPtpCount | read-only | mandatory | Count of the pass-through ports in the library |
| 1.3.6.1.4.1.1211.1.12.6.2 | TablelserPtpTable | not-accessible | mandatory | A table of pass-through ports |
| 1.3.6.1.4.1.1211.1.12.6.2.1 | RowlserPtpEntry | not-accessible | mandatory | A pass-through port (PTP) |
| 1.3.6.1.4.1.1211.1.12.6.2.1.1 | ColumnlserPtpIndex | read-only | mandatory | Integer index into the PTP table |
| 1.3.6.1.4.1.1211.1.12.6.2.1.2 | ColumnlserPtpState | read-only | mandatory | The state of the PTP |
| 1.3.6.1.4.1.1211.1.12.6.2.1.3 | ColumnlserPtpStatusEnum | read-only | mandatory | The PTP's operational state - reported as an enumeration |
| 1.3.6.1.4.1.1211.1.12.6.2.1.4 | ColumnlserPtpSerialNumber | read-only | mandatory | The PTP's controller serial number |
| 1.3.6.1.4.1.1211.1.12.6.2.1.5 | ColumnlserPtpPartNumber | read-only | mandatory | The PTP's controller part number |
| 1.3.6.1.4.1.1211.1.12.6.2.1.6 | ColumnlserPtpFirmwareVersion | read-only | mandatory | The PTP's embedded firmware version |
| 1.3.6.1.4.1.1211.1.12.6.2.1.7 | ColumnlserPtpFirmwareDate | read-only | mandatory | The PTP's embedded firmware build date |
| 1.3.6.1.4.1.1211.1.12.6.2.1.8 | ColumnlserPtpSoftwareResetCount | read-only | mandatory | The number of times the PTP's embedded firmware has been initialized |
| 1.3.6.1.4.1.1211.1.12.6.2.1.9 | ColumnlserPtpDoorOpenCount | read-only | mandatory | The number of times a service door has been opened (either library) |
| 1.3.6.1.4.1.1211.1.12.6.2.1.10 | ColumnlserPtpInitializationCount | read-only | mandatory | The number of times the PTP has been initialized |
| 1.3.6.1.4.1.1211.1.12.6.2.1.11 | ColumnlserPtpInoperativeCount | read-only | mandatory | The number of times PTP has been inoperative |
| 1.3.6.1.4.1.1211.1.12.6.2.1.12 | ColumnlserPtpGoodCommandCount | read-only | mandatory | The number of commands successfully processed by the PTP |
| 1.3.6.1.4.1.1211.1.12.6.2.1.13 | ColumnlserPtpFailCommandCount | read-only | mandatory | The number of failed commands processed by the PTP |
| 1.3.6.1.4.1.1211.1.12.6.2.1.14 | ColumnlserPtpGoodEmptyMotionCount | read-only | mandatory | The number of successful PTP motions with empty transport elements |
| 1.3.6.1.4.1.1211.1.12.6.2.1.15 | ColumnlserPtpFailEmptyMotionCount | read-only | mandatory | The number of unsuccessful PTP motions with empty transport elements |
| 1.3.6.1.4.1.1211.1.12.6.2.1.16 | ColumnlserPtpGoodPartMotionCount | read-only | mandatory | The number of successful partially populated PTP motions |
| 1.3.6.1.4.1.1211.1.12.6.2.1.17 | ColumnlserPtpFailPartMotionCount | read-only | mandatory | The number of unsuccessful partially populated PTP motions |
| 1.3.6.1.4.1.1211.1.12.6.2.1.18 | ColumnlserPtpGoodFullMotionCount | read-only | mandatory | The number of successful fully populated PTP motions |
| 1.3.6.1.4.1.1211.1.12.6.2.1.19 | ColumnlserPtpFailFullMotionCount | read-only | mandatory | The number of unsuccessful fully populated PTP motions |
| 1.3.6.1.4.1.1211.1.12.6.2.1.20 | ColumnlserPtpCompLibNetworkIpAddr | read-write | mandatory | The companion library's IP Address |
| 1.3.6.1.4.1.1211.1.12.6.2.1.21 | ColumnlserPtpCompLibNetworkName | read-write | mandatory | The companion library's network host name |
| 1.3.6.1.4.1.1211.1.12.6.2.1.22 | ColumnlserPtpCompLibSerialNumber | read-only | mandatory | The companion library's controller serial number |
| 1.3.6.1.4.1.1211.1.12.6.2.1.23 | ColumnlserPtpCompLibPartNumber | read-only | mandatory | The companion library's controller part number |
| 1.3.6.1.4.1.1211.1.12.6.2.1.24 | ColumnlserPtpCompLibVendorName | read-only | mandatory | The companion library's vendor name |
| 1.3.6.1.4.1.1211.1.12.6.2.1.25 | ColumnlserPtpCompLibModelName | read-only | mandatory | The companion library's model name |
| 1.3.6.1.4.1.1211.1.12.6.2.1.26 | ColumnlserPtpCompLibFirmwareVersion | read-only | mandatory | The companion library's embedded firmware version |
| 1.3.6.1.4.1.1211.1.12.6.2.1.27 | ColumnlserPtpCompLibFirmwareDate | read-only | mandatory | The companion library's embedded firmware build date |
| 1.3.6.1.4.1.1211.1.12.7 | NodelserInventory | |||
| 1.3.6.1.4.1.1211.1.12.7.1 | ScalarlserTapeCount | read-only | mandatory | Count of the cartridges in the inventory table |
| 1.3.6.1.4.1.1211.1.12.7.2 | TablelserTapeTable | not-accessible | mandatory | A table of cartridges in the library |
| 1.3.6.1.4.1.1211.1.12.7.2.1 | RowlserTapeEntry | not-accessible | mandatory | A cartridge |
| 1.3.6.1.4.1.1211.1.12.7.2.1.1 | ColumnlserTapeIndex | read-only | mandatory | Integer index into the inventory table |
| 1.3.6.1.4.1.1211.1.12.7.2.1.2 | ColumnlserTapeLabel | read-only | mandatory | The cartridge label |
| 1.3.6.1.4.1.1211.1.12.7.2.1.3 | ColumnlserTapeType | read-only | mandatory | The cartridge type |
| 1.3.6.1.4.1.1211.1.12.7.2.1.4 | ColumnlserTapeLocationElementID | read-only | mandatory | The cartridge location - element ID |
| 1.3.6.1.4.1.1211.1.12.7.2.1.5 | ColumnlserTapeHostAccessible | read-only | mandatory | Indication of host accessible status |
| 1.3.6.1.4.1.1211.1.12.8 | NodelserStorage | |||
| 1.3.6.1.4.1.1211.1.12.8.1 | ScalarlserCellCount | read-only | mandatory | Count of the storage elements in the cell table |
| 1.3.6.1.4.1.1211.1.12.8.2 | TablelserCellTable | not-accessible | mandatory | A table of storage elements in the library |
| 1.3.6.1.4.1.1211.1.12.8.2.1 | RowlserCellEntry | not-accessible | mandatory | A storage element |
| 1.3.6.1.4.1.1211.1.12.8.2.1.1 | ColumnlserCellIndex | read-only | mandatory | Integer index into the storage cell table |
| 1.3.6.1.4.1.1211.1.12.8.2.1.2 | ColumnlserCellElementID | read-only | mandatory | Element ID of the storage cell |
| 1.3.6.1.4.1.1211.1.12.8.2.1.3 | ColumnlserCellHostAccessible | read-only | mandatory | Indication of host accessible status |
| 1.3.6.1.4.1.1211.1.12.8.2.1.4 | ColumnlserCellContentStatus | read-only | mandatory | The status of the cell (EMPTY, READABLE, etc.) |
| 1.3.6.1.4.1.1211.1.12.8.2.1.5 | ColumnlserCellContentLabel | read-only | mandatory | The label of the cart in the cell (zero len string if empty, '??????' if unreadable) |
| 1.3.6.1.4.1.1211.1.12.8.2.1.6 | ColumnlserCellContentType | read-only | mandatory | The type of the cartridge in the cell (zero len string if empty) |
| 1.3.6.1.4.1.1211.1.12.8.2.1.7 | ColumnlserCellGetRetryCount | read-only | mandatory | Number of get retries performed from this cell |
| 1.3.6.1.4.1.1211.1.12.8.2.1.8 | ColumnlserCellPutRetryCount | read-only | mandatory | Number of put retries performed to this cell |
| 1.3.6.1.4.1.1211.1.12.8.3 | ScalarlserStorageFreeCells | read-only | mandatory | Number of available (empty) storage cells in the library |
| 1.3.6.1.4.1.1211.1.12.9 | NodelserPlayground | |||
| 1.3.6.1.4.1.1211.1.12.9.1 | ScalarlserPlayCellCount | read-only | mandatory | Count of the playground elements in the cell table |
| 1.3.6.1.4.1.1211.1.12.9.2 | TablelserPlayCellTable | not-accessible | mandatory | A table of playground elements in the library |
| 1.3.6.1.4.1.1211.1.12.9.2.1 | RowlserPlayCellEntry | not-accessible | mandatory | A playground element |
| 1.3.6.1.4.1.1211.1.12.9.2.1.1 | ColumnlserPlayCellIndex | read-only | mandatory | Integer index into the playground cell table |
| 1.3.6.1.4.1.1211.1.12.9.2.1.2 | ColumnlserPlayCellElementID | read-only | mandatory | Element ID of the playground cell |
| 1.3.6.1.4.1.1211.1.12.9.2.1.3 | ColumnlserPlayCellContentStatus | read-only | mandatory | The status of the cell (EMPTY, READABLE, etc.) |
| 1.3.6.1.4.1.1211.1.12.9.2.1.4 | ColumnlserPlayCellContentLabel | read-only | mandatory | The label of the cartridge in the cell (zero len string if empty, '??????' if unreadable) |
| 1.3.6.1.4.1.1211.1.12.9.2.1.5 | ColumnlserPlayCellContentType | read-only | mandatory | The type of the cartridge in the cell (zero len string if empty) |
| 1.3.6.1.4.1.1211.1.12.10 | NodelserHardwareMonitor | |||
| 1.3.6.1.4.1.1211.1.12.10.1 | ScalarlserHdwNumTempSensors | read-only | mandatory | Number of temperature sensors in the library |
| 1.3.6.1.4.1.1211.1.12.10.2 | TablelserHdwTempSensorTable | not-accessible | mandatory | A table of the library's temperature sensors |
| 1.3.6.1.4.1.1211.1.12.10.2.1 | RowlserHdwTempSensorEntry | not-accessible | mandatory | A temperature sensor |
| 1.3.6.1.4.1.1211.1.12.10.2.1.1 | ColumnlserHdwTempSensorIndex | read-only | mandatory | Integer index into the temperature sensor table |
| 1.3.6.1.4.1.1211.1.12.10.2.1.2 | ColumnlserHdwTempSensorName | read-only | mandatory | Name of the temperature sensor |
| 1.3.6.1.4.1.1211.1.12.10.2.1.3 | ColumnlserHdwTempSensorCurrentTemp | read-only | mandatory | Current/Present temperature reading |
| 1.3.6.1.4.1.1211.1.12.10.2.1.4 | ColumnlserHdwTempSensorHighTemp | read-only | mandatory | Storage area peak temp since last machine boot |
| 1.3.6.1.4.1.1211.1.12.10.2.1.5 | ColumnlserHdwTempSensorWarnThreshold | read-write | mandatory | Temp threshold for automated warning |
| 1.3.6.1.4.1.1211.1.12.10.2.1.6 | ColumnlserHdwTempSensorFailThreshold | read-write | mandatory | Temp threshold for automated library activity shutdown |
| 1.3.6.1.4.1.1211.1.12.10.3 | ScalarlserHdwNumFans | read-only | mandatory | Number of monitored fans in the library |
| 1.3.6.1.4.1.1211.1.12.10.4 | TablelserHdwFanTable | not-accessible | mandatory | A table of the library's fans |
| 1.3.6.1.4.1.1211.1.12.10.4.1 | RowlserHdwFanEntry | not-accessible | mandatory | A fan |
| 1.3.6.1.4.1.1211.1.12.10.4.1.1 | ColumnlserHdwFanIndex | read-only | mandatory | Integer index into the fan table |
| 1.3.6.1.4.1.1211.1.12.10.4.1.2 | ColumnlserHdwFanName | read-only | mandatory | Name of the fan |
| 1.3.6.1.4.1.1211.1.12.10.4.1.3 | ColumnlserHdwFanOperational | read-only | mandatory | Operational state of the fan |
| 1.3.6.1.4.1.1211.1.12.10.5 | ScalarlserHdwNumSupplies | read-only | mandatory | Number of power supplies installed in the library |
| 1.3.6.1.4.1.1211.1.12.10.6 | TablelserHdwSupplyTable | not-accessible | mandatory | A table of the library's power supplies |
| 1.3.6.1.4.1.1211.1.12.10.6.1 | RowlserHdwSupplyEntry | not-accessible | mandatory | A power supply |
| 1.3.6.1.4.1.1211.1.12.10.6.1.1 | ColumnlserHdwSupplyIndex | read-only | mandatory | Integer index into the power supply table |
| 1.3.6.1.4.1.1211.1.12.10.6.1.2 | ColumnlserHdwSupplyName | read-only | mandatory | Name of the power supply |
| 1.3.6.1.4.1.1211.1.12.10.6.1.3 | ColumnlserHdwSupplyInstalled | read-only | mandatory | Indicates if the supply is installed(2) or not(1) |
| 1.3.6.1.4.1.1211.1.12.10.6.1.4 | ColumnlserHdwSupplyOperational | read-only | mandatory | Indicates if the supply is OK(2), meaningless if not-installed |
| 1.3.6.1.4.1.1211.1.12.11 | NodelserTrapAgentStart | This trap is sent when the agent starts | ||
| 1.3.6.1.4.1.1211.1.12.21 | NodelserTrapLibStatusGood | This trap is sent when the library status changes to Good | ||
| 1.3.6.1.4.1.1211.1.12.25 | NodelserTrapLibStatusCheck | This trap is sent when the library status changes to a check condition (error, warning, unknown ...) | ||
| 1.3.6.1.4.1.1211.1.12.41 | NodelserTrapDrvStatusGood | This trap sent when a drive status changes to good | ||
| 1.3.6.1.4.1.1211.1.12.45 | NodelserTrapDrvStatusCheck | This trap sent when a drive status changes to a check condition (error, warning, unknown ...) | ||
| 1.3.6.1.4.1.1211.1.12.61 | NodelserTrapCapStatusGood | This trap sent when a CAP status changes to good | ||
| 1.3.6.1.4.1.1211.1.12.63 | NodelserTrapCapStatusOpen | This trap sent when a CAP status changes to open | ||
| 1.3.6.1.4.1.1211.1.12.65 | NodelserTrapCapStatusCheck | This trap sent when a CAP status changes to a check condition (error, warning, unknown ...) | ||
| 1.3.6.1.4.1.1211.1.12.81 | NodelserTrapPtpStatusGood | This trap sent when a PTP status changes to good | ||
| 1.3.6.1.4.1.1211.1.12.85 | NodelserTrapPtpStatusCheck | This trap sent when a PTP status changes to a check condition (error, warning, unknown ...) | ||
| 1.3.6.1.4.1.1211.1.12.101 | NodelserTrapMediaStat | This trap is sent when a media statistic is generated |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| LserCmdClear | INTEGER { noaction(1), clear(2) } | ||
| LserDeviceStatus | INTEGER { unknown(1), ok(2), error(3), warning(4) } | ||
| LserDriveFibreAddressing | INTEGER { hard(1), soft(2) } | ||
| LserDriveFibreLoopId | INTEGER ( 0 | 1..125 ) | ||
| LserDriveFibreSpeed | INTEGER { unknown(1), oneGbit(2), twoGbit(3) } | ||
| LserMediaErrorType | INTEGER { load(1), unload(2), error(3), unknown(4) } | ||
| LserSnmpPort | INTEGER ( 161 | 1024..65535 ) | ||
| LserSnmpTrapPort | INTEGER ( 162 | 1024..65535 ) |