LUCENT-GENERIC-DLOAD-MIB
62 objects
Lucent Generic Download / Upload Private MIB
Imported Objects
| SNMPv2-SMI | enterprises IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.677 | IdentityluDload | Lucent Generic Download / Upload Private MIB | ||
| 1.3.6.1.4.1.677.1 | TableluOpTable | not-accessible | current | |
| 1.3.6.1.4.1.677.1.1 | RowluOpEntry | not-accessible | current | Each entry in the LU Operations Table corresponds to a unique logical managed device. It is possible that a single HW device can have resident severial Logical… |
| 1.3.6.1.4.1.677.1.1.1 | ColumnluOpSerialNumber | read-only | current | The identifier of the device. This is a unique number and in most cases maps directly to the base MAC address of the device. Otherwise any combination of chara… |
| 1.3.6.1.4.1.677.1.1.2 | ColumnluOpMCodeVersion | read-only | current | Microcode version of the device. Stored in the format :- first Byte - not used 2nd Byte - microcode major version number 3rd Byte - microcode minor version num… |
| 1.3.6.1.4.1.677.1.1.3 | ColumnluOpBCodeVersion | read-only | current | Bootcode version of the device and the hardware version. Stored in the format :- first Byte - hardware version number 2nd Byte - microcode major version number… |
| 1.3.6.1.4.1.677.1.1.4 | ColumnluOpMCodeFilename | read-only | current | Original filename for the microcode that has been downloaded to the device. |
| 1.3.6.1.4.1.677.1.1.5 | ColumnluOpAdminStatus | read-write | current | The desired operating mode of the device. The mode can be changed by setting this object. If the device does not support the action it will return a bad value … |
| 1.3.6.1.4.1.677.1.1.6 | ColumnluOpOperStatus | read-only | current | The current operating mode of the device. normal - standard operating mode reboot - the device is rebooting identify - the device is identifying itself test - … |
| 1.3.6.1.4.1.677.1.1.7 | ColumnluOpEraseFlashVersion | read-write | current | A valid version index for the bank of flash or a software component to erase when AdminStatus is set to erase-flash. NOTE:This variable is only available on de… |
| 1.3.6.1.4.1.677.1.1.8 | ColumnluOpDefaultFlashVersion | read-write | current | The version index of the default flash bank that a device will reboot into when a standard reboot is performed. NOTE:This variable is only available on devices… |
| 1.3.6.1.4.1.677.1.1.9 | ColumnluOpConfFileName | read-write | current | This specifies the filename under which to store the current configuration. |
| 1.3.6.1.4.1.677.1.1.10 | ColumnluOpIndex | read-only | current | |
| 1.3.6.1.4.1.677.2 | TableluDeviceTable | not-accessible | current | A table containing information for all downloadable locations in the device components in a device. |
| 1.3.6.1.4.1.677.2.1 | RowluDeviceEntry | not-accessible | current | An entry containing information for a specific downloadable location in a device. |
| 1.3.6.1.4.1.677.2.1.1 | ColumnluDeviceIndex | not-accessible | current | |
| 1.3.6.1.4.1.677.2.1.2 | ColumnluDeviceDescription | read-only | current | A string containing a textual description for the component identified by this entry. |
| 1.3.6.1.4.1.677.2.1.3 | ColumnluDeviceLocation | read-only | current | A string containing a textual description of the location of the component identified by this entry. eg Flash Bank A Flash ROM Boot ROM Boot Bank A Base Hardwa… |
| 1.3.6.1.4.1.677.2.1.4 | ColumnluDeviceNumber | read-only | current | Version number for the component. Stored in the format :- 1st Byte - major version number 2nd Byte - minor version number 3rd Byte - debug version number. |
| 1.3.6.1.4.1.677.2.1.5 | ColumnluDeviceType | read-only | current | The type of object that this table entry contains Location information for. flash : code image resident in flash OR the flash bank itself boot-fixed : the vers… |
| 1.3.6.1.4.1.677.2.1.6 | ColumnluDeviceFileName | read-write | current | A string containing the file name of the component identified by this entry. Allows to rename a file. |
| 1.3.6.1.4.1.677.3 | ScalarluDeviceCount | read-only | current | The number of entries in the Location table |
| 1.3.6.1.4.1.677.4 | TableluDownloadTable | not-accessible | current | |
| 1.3.6.1.4.1.677.4.1 | RowluDownloadEntry | not-accessible | current | |
| 1.3.6.1.4.1.677.4.1.1 | ColumnluDownloadIPAddress | read-only | current | The IP address of the server to use for the download when using TFTP-IP |
| 1.3.6.1.4.1.677.4.1.2 | ColumnluDownloadIPGateway | read-write | current | The IP gateway to be used to access the server. If this variable is zero then use the default gateway in luOpIPGateway. |
| 1.3.6.1.4.1.677.4.1.3 | ColumnluDownloadIPXAddress | read-write | current | The IPX address of the server to use for the download when using TFTP-IPX or RPL-IPX. The format of the address is <ipx network><node address><socket> = 12 byt… |
| 1.3.6.1.4.1.677.4.1.4 | ColumnluDownloadNodeAddress | read-write | current | The Node address of the server to use for the download when using RPL-LLC |
| 1.3.6.1.4.1.677.4.1.5 | ColumnluDownloadFileName | read-write | current | The filename of the microcode to download. The maximum length of this string is device specific. If a string that is too long is written to this variable BAD V… |
| 1.3.6.1.4.1.677.4.1.6 | ColumnluDownloadDestination | read-write | current | The destination for the download. This will contain the luDeviceIndex for the download destination. |
| 1.3.6.1.4.1.677.4.1.7 | ColumnluDownloadState | read-only | current | The current state of the download |
| 1.3.6.1.4.1.677.4.1.8 | ColumnluDownloadFailureCode | read-only | current | While a download is in progress this will always be 'no-error'. After a download is complete this indicates the success or failure of the download. If it is an… |
| 1.3.6.1.4.1.677.4.1.9 | ColumnluDownloadStatusText | read-only | current | A display string describing the status of the download in progress, or the reason for failure of the last download. If FailureCode = no-error then StatusText m… |
| 1.3.6.1.4.1.677.4.1.10 | ColumnluDownloadSize | read-only | current | While a download is in progress this indicates the number of bytes transferred so far. After the download is completed this remains at the final size downloade… |
| 1.3.6.1.4.1.677.4.1.11 | ColumnluDownloadErrorLogName | read-write | current | The filename under which an error log has been created. In the case of file downloads that produce errors this file should contain a log of errors that occured |
| 1.3.6.1.4.1.677.4.1.12 | ColumnluDownloadErrorLogLocation | read-write | current | The location of the error log. This will contain the luDeviceIndex for the error log |
| 1.3.6.1.4.1.677.5 | TableluUploadTable | not-accessible | current | |
| 1.3.6.1.4.1.677.5.1 | RowluUploadEntry | not-accessible | current | |
| 1.3.6.1.4.1.677.5.1.1 | ColumnluUploadIPAddress | read-only | current | The IP address of the server to use for the upload when using TFTP-IP |
| 1.3.6.1.4.1.677.5.1.2 | ColumnluUploadIPGateway | read-write | current | The IP gateway to be used to access the server. If this variable is zero then use the default gateway in luOpIPGateway. |
| 1.3.6.1.4.1.677.5.1.3 | ColumnluUploadIPXAddress | read-write | current | The IPX address of the server to use for the upload when using TFTP-IPX. The format of the address is <ipx network><node address><socket> = 12 bytes. |
| 1.3.6.1.4.1.677.5.1.4 | ColumnluUploadFileName | read-write | current | The filename under which to store the uploaded microcode. The maximum length of this string is device specific. If a string that is too long is written to this… |
| 1.3.6.1.4.1.677.5.1.5 | ColumnluUploadSource | read-write | current | The source for the upload. This will contain the luDeviceIndex for the upload source. |
| 1.3.6.1.4.1.677.5.1.6 | ColumnluUploadState | read-only | current | The current state of the Upload |
| 1.3.6.1.4.1.677.5.1.7 | ColumnluUploadFailureCode | read-only | current | While an upload is in progress this will always be 'no-error'. After an upload is complete this indicates the success or failure of the upload. If it is anythi… |
| 1.3.6.1.4.1.677.5.1.8 | ColumnluUploadStatusText | read-only | current | A display string describing the status of the upload in progress, or the reason for failure of the last upload. If FailureCode = no-error then StatusText may b… |
| 1.3.6.1.4.1.677.5.1.9 | ColumnluUploadSize | read-only | current | While an upload is in progress this indicates the number of bytes transferred so far. After the upload is completed this remains at the final size uploaded. |
| 1.3.6.1.4.1.677.5.1.10 | ColumnluUploadErrorLogName | read-write | current | The filename under which an error log has been created. In the case of file uploads that produce errors this file should contain a log of errors that occured |
| 1.3.6.1.4.1.677.5.1.11 | ColumnluUploadErrorLogLocation | read-write | current | The location of the error log. This will contain the luDeviceIndex for the error log |
| 1.3.6.1.4.1.677.6 | NodeluDloadNotifications | |||
| 1.3.6.1.4.1.677.6.1 | ScalarluNotificationNextIndex | read-create | current | The Next available Index of the luNotificationDestTable |
| 1.3.6.1.4.1.677.6.2 | TableluNotificationDestTable | not-accessible | current | |
| 1.3.6.1.4.1.677.6.2.1 | RowluNotificationDestEntry | not-accessible | current | |
| 1.3.6.1.4.1.677.6.2.1.1 | ColumnluNotificationIndex | read-create | current | The Index of this Destination entry. |
| 1.3.6.1.4.1.677.6.2.1.2 | ColumnluNotificationIPAddress | read-create | current | The IP address of the trap receiver. If IPX Addresses are being used this entry must be zero. |
| 1.3.6.1.4.1.677.6.2.1.3 | ColumnluNotificationIPGateway | read-create | current | The IP gateway of the trap receiver. If IPX Addresses are being used this entry must be zero. |
| 1.3.6.1.4.1.677.6.2.1.4 | ColumnluNotificationIPXAddress | read-create | current | The IPX address of the trap receiver. If IP Addresses are being used this entry must be zero. The format of the address is <ipx network><node address><socket> … |
| 1.3.6.1.4.1.677.6.2.1.5 | ColumnluNotificationNodeAddress | read-create | current | The Node address of the trap receiver. If IP Addresses are being used this entry must be zero. |
| 1.3.6.1.4.1.677.6.2.1.6 | ColumnluNotificationTrapTypes | read-create | current | The Trap types this entry should receive. |
| 1.3.6.1.4.1.677.6.2.1.7 | ColumnluNotificationRowStatus | read-create | current | The Status of this entry in the table. Note the available states: active(1), notInService(2) notReady(3), createAndGo(4), createAndWait(5) or destroy(6) |
| 1.3.6.1.4.1.677.6.3 | NotificationluDloadTrapCompleted | current | Indicates that a download has completed. | |
| 1.3.6.1.4.1.677.6.4 | NotificationluUpLoadTrapCompleted | current | Indicates that a upload has completed. |