LUM-IFBASIC-MIB
98 objects
The MIB module for management of basic port objects. The tables contained in this MIB are: (1) The General group contains some general attributes as time stamps and tables sizes. (2) The If group contains information about the name of the port that is used in GUI. (2) The Admin group contains information and configuration for all interfaces available for If Basic Admin objects. (3) The Signal group contains information and configuration for all interfaces available for If Basic Signal objects.
Imported Objects
| LUM-REG | lumIfBasicMIB lumModules |
| LUM-TC MISSING | AdminStatusWithNA AutoAlarmStatus CommandString ConnectorType DisplayStringWithNA EnabledDisabledWithNA FaultStatusWithNA InterfaceStatus InterfaceType Layer MgmtNameString OperStatusWithNA OpticalLayerMappingType PhysicalLayerMappingType ResetWithNA SignalDirection SignalFormat SignalStatusWithNA Time7200min Time7200minNo0 TribPortIdType TruthValueWithNA Unsigned32WithNA |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8708.1.1.46 | IdentitylumIfBasicMIBModule | The MIB module for management of basic port objects. The tables contained in this MIB are: (1) The General group contains some general attributes as time stamp… | ||
| 1.3.6.1.4.1.8708.2.46.1 | NodelumIfBasicConfs | |||
| 1.3.6.1.4.1.8708.2.46.1.1 | NodelumIfBasicGroups | |||
| 1.3.6.1.4.1.8708.2.46.1.1.1 | GroupifBasicGeneralGroupV1 | current | The general objects. | |
| 1.3.6.1.4.1.8708.2.46.1.1.2 | GroupifBasicIfGroupV1 | deprecated | The ifBasic if objects (R20.0). | |
| 1.3.6.1.4.1.8708.2.46.1.1.3 | GroupifBasicAdminGroupV1 | deprecated | The ifBasic admin objects (R20.0). | |
| 1.3.6.1.4.1.8708.2.46.1.1.4 | GroupifBasicSignalGroupV1 | deprecated | The ifBasic signal objects (R20.0). | |
| 1.3.6.1.4.1.8708.2.46.1.1.5 | GroupifBasicSignalGroupV2 | deprecated | The ifBasic signal objects (R22.0). | |
| 1.3.6.1.4.1.8708.2.46.1.1.6 | GroupifBasicSignalGroupV3 | deprecated | The ifBasic signal objects (R23.0). | |
| 1.3.6.1.4.1.8708.2.46.1.1.7 | GroupifBasicSignalGroupV4 | deprecated | The ifBasic signal objects (R26.0). | |
| 1.3.6.1.4.1.8708.2.46.1.1.8 | GroupifBasicIfGroupV2 | deprecated | The ifBasic if objects (R26.0). | |
| 1.3.6.1.4.1.8708.2.46.1.1.9 | GroupifBasicSignalGroupV5 | deprecated | The ifBasic signal objects (R26.1). | |
| 1.3.6.1.4.1.8708.2.46.1.1.10 | GroupifBasicSignalGroupV6 | deprecated | The ifBasic signal objects (R28.0). | |
| 1.3.6.1.4.1.8708.2.46.1.1.11 | GroupifBasicAdminGroupV2 | deprecated | The ifBasic admin objects (R28.0). | |
| 1.3.6.1.4.1.8708.2.46.1.1.12 | GroupifBasicIfGroupV3 | current | The ifBasic if objects (R28.0). | |
| 1.3.6.1.4.1.8708.2.46.1.1.13 | GroupifBasicAdminGroupV3 | deprecated | The ifBasic admin objects (R31.0). | |
| 1.3.6.1.4.1.8708.2.46.1.1.14 | GroupifBasicSignalGroupV7 | current | The ifBasic signal objects (R31.0). | |
| 1.3.6.1.4.1.8708.2.46.1.1.15 | GroupifBasicAdminGroupV4 | current | The ifBasic admin objects (R32.0). | |
| 1.3.6.1.4.1.8708.2.46.1.2 | NodelumIfBasicCompl | |||
| 1.3.6.1.4.1.8708.2.46.1.2.1 | CompliancelumIfBasicBasicComplV1 | deprecated | Basic implementation requirements for the ifBasic MIB. (R20.0) | |
| 1.3.6.1.4.1.8708.2.46.1.2.2 | CompliancelumIfBasicBasicComplV2 | deprecated | Basic implementation requirements for the ifBasic MIB. (R22.0) | |
| 1.3.6.1.4.1.8708.2.46.1.2.3 | CompliancelumIfBasicBasicComplV3 | deprecated | Basic implementation requirements for the ifBasic MIB. (R23.0) | |
| 1.3.6.1.4.1.8708.2.46.1.2.4 | CompliancelumIfBasicBasicComplV4 | deprecated | Basic implementation requirements for the ifBasic MIB. (R26.0) | |
| 1.3.6.1.4.1.8708.2.46.1.2.5 | CompliancelumIfBasicBasicComplV5 | deprecated | Basic implementation requirements for the ifBasic MIB. (R26.1) | |
| 1.3.6.1.4.1.8708.2.46.1.2.6 | CompliancelumIfBasicBasicComplV6 | deprecated | Basic implementation requirements for the ifBasic MIB. (R28.0) | |
| 1.3.6.1.4.1.8708.2.46.1.2.7 | CompliancelumIfBasicBasicComplV7 | deprecated | Basic implementation requirements for the ifBasic MIB. (R31.0) | |
| 1.3.6.1.4.1.8708.2.46.1.2.8 | CompliancelumIfBasicBasicComplV8 | current | Basic implementation requirements for the ifBasic MIB. (R32.0) | |
| 1.3.6.1.4.1.8708.2.46.2 | NodelumIfBasicMIBObjects | |||
| 1.3.6.1.4.1.8708.2.46.2.1 | NodeifBasicGeneral | |||
| 1.3.6.1.4.1.8708.2.46.2.1.1 | ScalarifBasicGeneralConfigLastChangeTime | read-only | current | The time when the configuration of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.46.2.1.2 | ScalarifBasicGeneralStateLastChangeTime | read-only | current | The time when the state of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.46.2.1.3 | ScalarifBasicGeneralIfBasicIfTableSize | read-only | current | Size of if table |
| 1.3.6.1.4.1.8708.2.46.2.1.4 | ScalarifBasicGeneralIfBasicIfConfigLastChangeTime | read-only | current | The time when the configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.46.2.1.5 | ScalarifBasicGeneralIfBasicIfStateLastChangeTime | read-only | current | The time when the state and/or configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.46.2.1.6 | ScalarifBasicGeneralIfBasicAdminTableSize | read-only | current | Size of admin table |
| 1.3.6.1.4.1.8708.2.46.2.1.7 | ScalarifBasicGeneralIfBasicAdminConfigLastChangeTime | read-only | current | The time when the configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.46.2.1.8 | ScalarifBasicGeneralIfBasicAdminStateLastChangeTime | read-only | current | The time when the state and/or configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.46.2.1.9 | ScalarifBasicGeneralIfBasicSignalTableSize | read-only | current | Size of signal table |
| 1.3.6.1.4.1.8708.2.46.2.1.10 | ScalarifBasicGeneralIfBasicSignalConfigLastChangeTime | read-only | current | The time when the configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.46.2.1.11 | ScalarifBasicGeneralIfBasicSignalStateLastChangeTime | read-only | current | The time when the state and/or configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.46.2.2 | NodeifBasicIfList | |||
| 1.3.6.1.4.1.8708.2.46.2.2.1 | TableifBasicIfTable | not-accessible | current | The if basic if interface list. |
| 1.3.6.1.4.1.8708.2.46.2.2.1.1 | RowifBasicIfEntry | not-accessible | current | An entry in the ifBasic if list. |
| 1.3.6.1.4.1.8708.2.46.2.2.1.1.1 | ColumnifBasicIfIndex | read-only | current | An index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.46.2.2.1.1.2 | ColumnifBasicIfName | read-only | current | The management name of the interface, for example 'client:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are t… |
| 1.3.6.1.4.1.8708.2.46.2.2.1.1.3 | ColumnifBasicIfTxSignalStatus | read-only | current | The state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. |
| 1.3.6.1.4.1.8708.2.46.2.2.1.1.4 | ColumnifBasicIfRxSignalStatus | read-only | current | The state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. |
| 1.3.6.1.4.1.8708.2.46.2.2.1.1.5 | ColumnifBasicIfUpId | read-only | current | Identity in the UP for the interface. The upId is used internally between CU and TU to define a certain interface in the TU. |
| 1.3.6.1.4.1.8708.2.46.2.2.1.1.6 | ColumnifBasicIfAid | read-only | current | The access identifier (AID) of the interface. The format is according to GR-833. |
| 1.3.6.1.4.1.8708.2.46.2.2.1.1.7 | ColumnifBasicIfPhysicalLocation | read-only | current | The physical location of the if. The format is according to GR-833. |
| 1.3.6.1.4.1.8708.2.46.2.3 | NodeifBasicAdminList | |||
| 1.3.6.1.4.1.8708.2.46.2.3.1 | TableifBasicAdminTable | not-accessible | current | The if basic admin interface list. |
| 1.3.6.1.4.1.8708.2.46.2.3.1.1 | RowifBasicAdminEntry | not-accessible | current | An entry in the ifBasic admin list. |
| 1.3.6.1.4.1.8708.2.46.2.3.1.1.1 | ColumnifBasicAdminIndex | read-only | current | An index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.46.2.3.1.1.2 | ColumnifBasicAdminName | read-only | current | The management name of the interface, for example 'admin:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are th… |
| 1.3.6.1.4.1.8708.2.46.2.3.1.1.3 | ColumnifBasicAdminDescr | read-write | current | User configurable label. |
| 1.3.6.1.4.1.8708.2.46.2.3.1.1.4 | ColumnifBasicAdminSubrack | read-create | current | The subrack of the physical port that this interface is bound to. |
| 1.3.6.1.4.1.8708.2.46.2.3.1.1.5 | ColumnifBasicAdminSlot | read-create | current | The slot of the physical port that this interface is bound to. |
| 1.3.6.1.4.1.8708.2.46.2.3.1.1.6 | ColumnifBasicAdminTxPort | read-create | current | The transmitting physical port that this interface is bound to. |
| 1.3.6.1.4.1.8708.2.46.2.3.1.1.7 | ColumnifBasicAdminRxPort | read-create | current | The receiving physical port that this interface is bound to. |
| 1.3.6.1.4.1.8708.2.46.2.3.1.1.8 | ColumnifBasicAdminAdminStatus | read-write | current | The administrative state of the ifBasic interface. down - The interface is de-activated. service - The interface is activated but alarms are suppressed. Intend… |
| 1.3.6.1.4.1.8708.2.46.2.3.1.1.9 | ColumnifBasicAdminOperStatus | read-only | current | The operational state for the interface. notPresent - The interface is not available. down - The interface is de-activated or there are faults preventing its t… |
| 1.3.6.1.4.1.8708.2.46.2.3.1.1.10 | ColumnifBasicAdminAutoAlarmEnableStatus | read-only | current | The state of auto alarm enable for the interface. suppressTrxAndSignal - Both signal alarms and trx alarms are suppressed suppressSignal - Only signal alarms a… |
| 1.3.6.1.4.1.8708.2.46.2.3.1.1.11 | ColumnifBasicAdminAutoAlarmEnableReset | read-only | current | When the attribute is set to reset the auto-alarm enable function is re-initialised. Then the attribute is set to normal again automatically. reset - Re-initia… |
| 1.3.6.1.4.1.8708.2.46.2.3.1.1.12 | ColumnifBasicAdminInterfaceStatus | read-only | current | The status of the traffic interface. outOfService - No PM and no alarms. autoInService - No PM and no alarms. Changes to 'inService' when OK. inService - Repor… |
| 1.3.6.1.4.1.8708.2.46.2.3.1.1.13 | ColumnifBasicAdminIfNo | read-create | current | The physical interface number of the actual multi-connector port. |
| 1.3.6.1.4.1.8708.2.46.2.3.1.1.14 | ColumnifBasicAdminIfType | read-create | current | Type of interface (Individual or bundled). |
| 1.3.6.1.4.1.8708.2.46.2.3.1.1.15 | ColumnifBasicAdminNotAvailableForUse | read-only | current | Is the interface not available for use. The interface may be created in order to show some physical properties but may otherwise be unavailable for service dep… |
| 1.3.6.1.4.1.8708.2.46.2.4 | NodeifBasicSignalList | |||
| 1.3.6.1.4.1.8708.2.46.2.4.1 | TableifBasicSignalTable | not-accessible | current | The if basic signal interface list. |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1 | RowifBasicSignalEntry | not-accessible | current | An entry in the ifBasic signal list. |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.1 | ColumnifBasicSignalIndex | read-only | current | An index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.2 | ColumnifBasicSignalName | read-only | current | The management name of the interface, for example 'signal:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are t… |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.3 | ColumnifBasicSignalSignalStructure | read-only | current | The signal structure used. Bitfield 64 bit wide. For internal use. Bit 0 tells if mib ifBasicPhysicalTrx is loaded, bit 1 ifBasicOpticalTranssection, etc accor… |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.4 | ColumnifBasicSignalSignalFormat | read-write | current | The signal format. |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.5 | ColumnifBasicSignalFarEndLoopbackTerminatingLayer | read-only | current | The layer where the far end loopback (a.k.a. terminal loopback for a client interface and facility loopback for a line interface) is done. This is coded in a b… |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.6 | ColumnifBasicSignalFarEndLoopback | read-write | current | The far end loopback (a.k.a. terminal loopback for a client interface and facility loopback for a line interface) setting. disabled - Far end loopback is not s… |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.7 | ColumnifBasicSignalFarEndLoopbackTimeout | read-write | current | Timeout for far end loopback (a.k.a. terminal loopback for a client interface and facility loopback for a line interfac) to make sure connection to node is not… |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.8 | ColumnifBasicSignalNearEndLoopbackTerminatingLayer | read-only | current | The layer where the near end loopback (a.k.a. terminal loopback for a line interface and facility loopback for a client interface) is done. This is coded in a … |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.9 | ColumnifBasicSignalNearEndLoopback | read-write | current | The near end loopback (a.k.a. terminal loopback for a line interface and facility loopback for a client interface) setting. disabled - Near end loopback is not… |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.10 | ColumnifBasicSignalNearEndLoopbackTimeout | read-write | current | Timeout for near end loopback (a.k.a. terminal loopback for a line interface and facility loopback for a client interface) to make sure connection to node is n… |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.11 | ColumnifBasicSignalFarEndLoopbackEnabled | read-only | current | Far end end loopback (a.k.a. terminal loopback for a client interface and facility loopback for a line interface) is enabled. alarm: Far end loopback is enable… |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.12 | ColumnifBasicSignalNearEndLoopbackEnabled | read-only | current | Near end end loopback (a.k.a. terminal loopback for a line interface and facility loopback for a client interface) is enabled. alarm: Near end loopback is enab… |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.13 | ColumnifBasicSignalOpticalLayerMapping | read-write | current | The optical layer mapping. |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.14 | ColumnifBasicSignalConfigurationMismatch | read-only | deprecated | The inserted transceiver does not support the configuration of the optical layer mapping. alarm: A transceiver with other supported optical layer mapping than … |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.15 | ColumnifBasicSignalActualOpticalLayerMapping | read-only | current | The actual optical layer mapping. |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.16 | ColumnifBasicSignalSpeed | read-write | current | The expected signal bit rate in units of 10,000 bits (0.01 Mb) per second. |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.17 | ColumnifBasicSignalDirection | read-only | current | The direction in which this object is referred to. rx - In bound direction. (1) tx - out bound direction. (2) biDir - the interface has one connector used for … |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.18 | ColumnifBasicSignalFormatConfigurable | read-only | current | This atttribute indicates if the interface is format configurable or not true - The interface is format configurable false - The interface is not format config… |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.19 | ColumnifBasicSignalFormatConfigurationSharedWithInterface | read-only | current | This attribute specifies whether this object instances shares the format configuration with another object instance. value == 0: it is not shared value != 0: i… |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.20 | ColumnifBasicSignalPhysicalLayerMapping | read-write | current | The expected physical layer mapping. |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.21 | ColumnifBasicSignalFacilityLoopback | read-write | current | The facility loopback setting. Rx is looped to Tx. The purpose of facility loopback is to test the line interface termination. disabled - Facility loopback is … |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.22 | ColumnifBasicSignalFacilityLoopbackTimeout | read-write | current | Timeout for facility loopback to make sure connection to node is not lost if ppp link is broken. The unit is minutes. Note! This attribute is not saved in back… |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.23 | ColumnifBasicSignalFacilityLoopbackEnabled | read-only | current | Facility loopback is enabled. alarm: Facility loopback is enabled. ok: Facility loopback is disabled. |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.24 | ColumnifBasicSignalTerminalLoopback | read-write | current | The terminal loopback setting. Tx is looped to Rx. The purpose of a terminal loopback is to test the path through the equipment (a cross-connect, mux/demux sta… |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.25 | ColumnifBasicSignalTerminalLoopbackTimeout | read-write | current | Timeout for terminal loopback to make sure connection to node is not lost if ppp link is broken. The unit is minutes. Note! This attribute is not saved in back… |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.26 | ColumnifBasicSignalTerminalLoopbackEnabled | read-only | current | Terminal loopback is enabled. alarm: Terminal loopback is enabled. ok: Terminal loopback is disabled. |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.27 | ColumnifBasicSignalConnectorType | read-only | current | The connector type. |