LUM-IFOTNMON-MIB
109 objects
The MIB module for management of OTN monitor objects (SM, TCM, PM and trace objects). This module describes the SM, TCM and PM in ITU-T Recommendation G.709. The references refers to the following: G.709/Y.1331 (03/2003) G.798 (06/2004) G.806 (03/2006) The tables contained in this MIB are: (1) The General group contains some general attributes as time stamps and tables sizes. (2) The sm group contains information and configuration for the SM section objects. (3) The tandem connection monitoring (tcm) group contains information and configuration for the Tcm layer objects. (4) The path monitoring (pm) group contains information and configu- ration for the Pm layer objects. (5) The trace group contains information and configuration for the trace objects defined in G.709.
Imported Objects
| LUM-REG | lumIfOtnMonMIB lumModules |
| LUM-TC MISSING | DisplayStringWithNA EnabledDisabledWithNA FaultStatusWithNA MgmtNameString OtnAlarmMode OtnDirectionWithNA OtnTIMDetModeWithNA OtnTypeWithNA SignalStatusWithNA TcmMode TcmNumber TruthValueWithNA Unsigned32WithNA |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8708.1.1.55 | IdentitylumIfOtnMonMIBModule | The MIB module for management of OTN monitor objects (SM, TCM, PM and trace objects). This module describes the SM, TCM and PM in ITU-T Recommendation G.709. T… | ||
| 1.3.6.1.4.1.8708.2.55.1 | NodelumIfOtnMonConfs | |||
| 1.3.6.1.4.1.8708.2.55.1.1 | NodelumIfOtnMonGroups | |||
| 1.3.6.1.4.1.8708.2.55.1.1.1 | GroupifOtnMonGeneralGroupV1 | current | The general objects. | |
| 1.3.6.1.4.1.8708.2.55.1.1.2 | GroupifOtnMonSmGroupV1 | current | The ifOtnMon sm objects (R20.0). | |
| 1.3.6.1.4.1.8708.2.55.1.1.3 | GroupifOtnMonTcmGroupV1 | deprecated | The ifOtnMon tcm objects (R20.0). | |
| 1.3.6.1.4.1.8708.2.55.1.1.4 | GroupifOtnMonPmGroupV1 | deprecated | The ifOtnMon pm objects (R20.0). | |
| 1.3.6.1.4.1.8708.2.55.1.1.5 | GroupifOtnMonTraceGroupV1 | deprecated | The ifOtnMon trace objects (R20.0). | |
| 1.3.6.1.4.1.8708.2.55.1.1.6 | GroupifOtnMonPmGroupV2 | deprecated | The ifOtnMon pm objects (R22.0). | |
| 1.3.6.1.4.1.8708.2.55.1.1.7 | GroupifOtnMonTcmGroupV2 | current | The ifOtnMon tcm objects (R23.0). | |
| 1.3.6.1.4.1.8708.2.55.1.1.8 | GroupifOtnMonTraceGroupV2 | deprecated | The ifOtnMon trace objects (R23.0). | |
| 1.3.6.1.4.1.8708.2.55.1.1.9 | GroupifOtnMonTraceGroupV3 | deprecated | The ifOtnMon trace objects (R25.0). | |
| 1.3.6.1.4.1.8708.2.55.1.1.10 | GroupifOtnMonPmGroupV3 | current | The ifOtnMon pm objects (R28.0). | |
| 1.3.6.1.4.1.8708.2.55.1.1.11 | GroupifOtnMonTraceGroupV4 | current | The ifOtnMon trace objects (R28.0). | |
| 1.3.6.1.4.1.8708.2.55.1.2 | NodelumIfOtnMonCompl | |||
| 1.3.6.1.4.1.8708.2.55.1.2.1 | CompliancelumIfOtnMonComplV1 | deprecated | Basic implementation requirements for the ifOtnMon MIB. (R20.0) | |
| 1.3.6.1.4.1.8708.2.55.1.2.2 | CompliancelumIfOtnMonComplV2 | deprecated | Basic implementation requirements for the ifOtnMon MIB. (R22.0) | |
| 1.3.6.1.4.1.8708.2.55.1.2.3 | CompliancelumIfOtnMonComplV3 | deprecated | Basic implementation requirements for the ifOtnMon MIB. (R23.0) | |
| 1.3.6.1.4.1.8708.2.55.1.2.4 | CompliancelumIfOtnMonComplV4 | deprecated | Basic implementation requirements for the ifOtnMon MIB. (R25.0) | |
| 1.3.6.1.4.1.8708.2.55.1.2.5 | CompliancelumIfOtnMonComplV5 | current | Basic implementation requirements for the ifOtnMon MIB. (R28.0) | |
| 1.3.6.1.4.1.8708.2.55.2 | NodelumIfOtnMonMIBObjects | |||
| 1.3.6.1.4.1.8708.2.55.2.1 | NodeifOtnMonGeneral | |||
| 1.3.6.1.4.1.8708.2.55.2.1.1 | ScalarifOtnMonGeneralConfigLastChangeTime | read-only | current | The time when the configuration of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.55.2.1.2 | ScalarifOtnMonGeneralStateLastChangeTime | read-only | current | The time when the state of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.55.2.1.3 | ScalarifOtnMonGeneralIfOtnMonSmTableSize | read-only | current | Size of SM table. |
| 1.3.6.1.4.1.8708.2.55.2.1.4 | ScalarifOtnMonGeneralIfOtnMonSmConfigLastChangeTime | read-only | current | The time when the configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.55.2.1.5 | ScalarifOtnMonGeneralIfOtnMonSmStateLastChangeTime | read-only | current | The time when the state and/or configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.55.2.1.6 | ScalarifOtnMonGeneralIfOtnMonTcmTableSize | read-only | current | Size of otn tcm table |
| 1.3.6.1.4.1.8708.2.55.2.1.7 | ScalarifOtnMonGeneralIfOtnMonTcmConfigLastChangeTime | read-only | current | The time when the configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.55.2.1.8 | ScalarifOtnMonGeneralIfOtnMonTcmStateLastChangeTime | read-only | current | The time when the state and/or configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.55.2.1.9 | ScalarifOtnMonGeneralIfOtnMonPmTableSize | read-only | current | Size of otn pm table |
| 1.3.6.1.4.1.8708.2.55.2.1.10 | ScalarifOtnMonGeneralIfOtnMonPmConfigLastChangeTime | read-only | current | The time when the configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.55.2.1.11 | ScalarifOtnMonGeneralIfOtnMonPmStateLastChangeTime | read-only | current | The time when the state and/or configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.55.2.1.12 | ScalarifOtnMonGeneralIfOtnMonTraceTableSize | read-only | current | Size of otn trace table |
| 1.3.6.1.4.1.8708.2.55.2.1.13 | ScalarifOtnMonGeneralIfOtnMonTraceConfigLastChangeTime | read-only | current | The time when the configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.55.2.1.14 | ScalarifOtnMonGeneralIfOtnMonTraceStateLastChangeTime | read-only | current | The time when the state and/or configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.55.2.2 | NodeifOtnMonSmList | |||
| 1.3.6.1.4.1.8708.2.55.2.2.1 | TableifOtnMonSmTable | not-accessible | current | The SM group contains information and configuration for the SM section objects. |
| 1.3.6.1.4.1.8708.2.55.2.2.1.1 | RowifOtnMonSmEntry | not-accessible | current | An entry in the ifOtnMon SM list. |
| 1.3.6.1.4.1.8708.2.55.2.2.1.1.1 | ColumnifOtnMonSmIndex | read-only | current | An index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.55.2.2.1.1.2 | ColumnifOtnMonSmName | read-only | current | The management name of the otn otu, for example 'otu:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are the ph… |
| 1.3.6.1.4.1.8708.2.55.2.2.1.1.3 | ColumnifOtnMonSmConnIfBasicIfIndex | read-only | current | An index that describes to which index in ifBasicIf table this object is related. |
| 1.3.6.1.4.1.8708.2.55.2.2.1.1.4 | ColumnifOtnMonSmTxSignalStatus | read-only | current | The state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. |
| 1.3.6.1.4.1.8708.2.55.2.2.1.1.5 | ColumnifOtnMonSmRxSignalStatus | read-only | current | The state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. |
| 1.3.6.1.4.1.8708.2.55.2.2.1.1.6 | ColumnifOtnMonSmBackwardDefectIndication | read-only | current | Backward defect indication (BDI). Indicates if backward defect indication (BDI) alarm exists or not. Reference: 15.7.2.1.3 G.709, 6.2.6.6.1 G.798 alarm: Backwa… |
| 1.3.6.1.4.1.8708.2.55.2.2.1.1.7 | ColumnifOtnMonSmIncomingAlignmentError | read-only | current | Incoming alignment error (IAE). Indicates an incoming frame alignment error. Reference: 15.7.2.1.5 G.709, 6.2.6.10.1 G.798 A: Incoming frame alignment error (I… |
| 1.3.6.1.4.1.8708.2.55.2.2.1.1.8 | ColumnifOtnMonSmBackwardIncomingAlignmentError | read-only | current | Backward incoming alignment error (BIAE). Indicates a backward incoming alignment error. Reference: 15.7.2.1.5 G.709, 6.2.6.10.1 G.798 A: Backward incoming ali… |
| 1.3.6.1.4.1.8708.2.55.2.3 | NodeifOtnMonTcmList | |||
| 1.3.6.1.4.1.8708.2.55.2.3.1 | TableifOtnMonTcmTable | not-accessible | current | The tandem connection monitoring (tcm) group contains information and configuration for the Tcm layer objects. |
| 1.3.6.1.4.1.8708.2.55.2.3.1.1 | RowifOtnMonTcmEntry | not-accessible | current | An entry in the ifOtnMon tcm list. |
| 1.3.6.1.4.1.8708.2.55.2.3.1.1.1 | ColumnifOtnMonTcmIndex | read-only | current | An index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.55.2.3.1.1.2 | ColumnifOtnMonTcmName | read-only | current | The management name of the otn tcm, for example 'tcm:1:2:1-2:1', where the first number indicates subrack, the second slot number and the third/fourth are the … |
| 1.3.6.1.4.1.8708.2.55.2.3.1.1.3 | ColumnifOtnMonTcmConnOduIndex | read-only | current | An index that describes to which index in ifOtnMonOdu table this object is related. |
| 1.3.6.1.4.1.8708.2.55.2.3.1.1.4 | ColumnifOtnMonTcmAlarmMode | read-only | current | Tells how section specific alarms are handled. ignore - Do not show fault status nor alarms for non-operational sections. display - Show fault status, but do n… |
| 1.3.6.1.4.1.8708.2.55.2.3.1.1.5 | ColumnifOtnMonTcmMode | read-only | current | TCM mode sets the mode of the TCM according to 14.5 in G.798 (06/2004). operational - The TCM overhead is operational. transparent - The TCM overhead is transp… |
| 1.3.6.1.4.1.8708.2.55.2.3.1.1.6 | ColumnifOtnMonTcmTcmNumber | read-only | current | TCM number in ODU overhead. Can be tcm1 .. tcm6. |
| 1.3.6.1.4.1.8708.2.55.2.3.1.1.7 | ColumnifOtnMonTcmTxSignalStatus | read-only | current | The state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. |
| 1.3.6.1.4.1.8708.2.55.2.3.1.1.8 | ColumnifOtnMonTcmRxSignalStatus | read-only | current | The state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. |
| 1.3.6.1.4.1.8708.2.55.2.3.1.1.9 | ColumnifOtnMonTcmBackwardDefectIndication | read-only | current | Rx Backward defect indication (BDI). Indicates if backward defect indication (BDI) alarm exists or not. Reference: 15.8.2.2.3 G.709, 2.6.6.1 G.798 alarm: Backw… |
| 1.3.6.1.4.1.8708.2.55.2.3.1.1.10 | ColumnifOtnMonTcmBackwardIncomingAlignmentError | read-only | current | Backward incoming alignment error (BIAE). Indicates a backward incoming alignment error. A: Backward incoming alignment error (BIAE) is active. D: BIAE is inac… |
| 1.3.6.1.4.1.8708.2.55.2.3.1.1.11 | ColumnifOtnMonTcmRxAlarmIndicationSignal | read-only | current | Rx Alarm indication signal (AIS). Indicates if alarm indication signal (AIS) alarm exists or not in receiving direction. Reference: 16.5.1 G.709, 15.8.2.1.5 G.… |
| 1.3.6.1.4.1.8708.2.55.2.3.1.1.12 | ColumnifOtnMonTcmRxOpenConnectionIndication | read-only | current | Rx Open connection indication (OCI). Indicates if an open connection indication (OCI) alarm exists or not in receiving direction. Reference: 15.8.2.2.5 G.709, … |
| 1.3.6.1.4.1.8708.2.55.2.3.1.1.13 | ColumnifOtnMonTcmRxLockedDefectIndication | read-only | current | Rx Locked defect indication (LCK). Indicates if locked defect indication alarm exists or not. Reference: 15.8.2.2.5 G.709, 6.2.6.9.1 G.798 alarm: Locked defect… |
| 1.3.6.1.4.1.8708.2.55.2.3.1.1.14 | ColumnifOtnMonTcmLossOfTandemConnection | read-only | current | Loss of tandem connection (LTC). No operational tandem connection is found in other end. Reference: 6.2.1.4 in G.798 alarm: No other operational TCM is found. … |
| 1.3.6.1.4.1.8708.2.55.2.3.1.1.15 | ColumnifOtnMonTcmIncomingAlignmentError | read-only | current | Incoming alignment error (IAE). Indicates an incoming frame alignment error when TCM is in use. A: Incoming frame alignment error (IAE) is active. D: IAE is in… |
| 1.3.6.1.4.1.8708.2.55.2.3.1.1.16 | ColumnifOtnMonTcmSwitchCriteria | read-only | current | TCM switch criteria set current TCM as protection switch criteria. disable - The TCM is not set as switch criteria. enable - The TCM is set as switch criteria. |
| 1.3.6.1.4.1.8708.2.55.2.4 | NodeifOtnMonPmList | |||
| 1.3.6.1.4.1.8708.2.55.2.4.1 | TableifOtnMonPmTable | not-accessible | current | The path monitoring (pm) group contains information and configu- ration for the Pm layer objects. |
| 1.3.6.1.4.1.8708.2.55.2.4.1.1 | RowifOtnMonPmEntry | not-accessible | current | An entry in the ifOtnMon pm list. |
| 1.3.6.1.4.1.8708.2.55.2.4.1.1.1 | ColumnifOtnMonPmIndex | read-only | current | An index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.55.2.4.1.1.2 | ColumnifOtnMonPmName | read-only | current | The management name of the otn pm, for example 'pm:1:2:1-2:1', where the first number indicates subrack, the second slot number and the third/fourth are the ph… |
| 1.3.6.1.4.1.8708.2.55.2.4.1.1.4 | ColumnifOtnMonPmConnOduIndex | read-only | current | An index that describes to which index in ifOtnMonOdu table this object is related. |
| 1.3.6.1.4.1.8708.2.55.2.4.1.1.5 | ColumnifOtnMonPmAlarmMode | read-only | current | Tells how section specific alarms are handled. ignore - Do not show fault status nor alarms for non-operational sections. display - Show fault status, but do n… |
| 1.3.6.1.4.1.8708.2.55.2.4.1.1.6 | ColumnifOtnMonPmTxSignalStatus | read-only | current | The state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. |
| 1.3.6.1.4.1.8708.2.55.2.4.1.1.7 | ColumnifOtnMonPmRxSignalStatus | read-only | current | The state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. |
| 1.3.6.1.4.1.8708.2.55.2.4.1.1.8 | ColumnifOtnMonPmRxBackwardDefectIndication | read-only | current | Rx Backward defect indication (BDI), Monitored overhead: ODUk-PM-BDI Direction: Received from the associated physical interface and, unless the ODUk is termina… |
| 1.3.6.1.4.1.8708.2.55.2.4.1.1.9 | ColumnifOtnMonPmRxAlarmIndicationSignal | read-only | current | Rx Alarm indication signal (AIS), Monitored overhead: ODUk-PM-AIS Direction: Received from the associated physical interface and, unless the ODUk is terminated… |
| 1.3.6.1.4.1.8708.2.55.2.4.1.1.10 | ColumnifOtnMonPmRxOpenConnectionIndication | read-only | current | Rx Open connection indication (OCI). Monitored overhead: ODUk-PM-OCI Direction: Received from the associated physical interface and, unless the ODUk is termina… |
| 1.3.6.1.4.1.8708.2.55.2.4.1.1.11 | ColumnifOtnMonPmRxLockedDefectIndication | read-only | current | Rx Locked defect indication (LCK). Monitored overhead: ODUk-PM-LCK Direction: Received from the associated physical interface and, unless the ODUk is terminate… |
| 1.3.6.1.4.1.8708.2.55.2.4.1.1.12 | ColumnifOtnMonPmTxBackwardDefectIndication | read-only | current | Tx Backward defect indication (BDI). Monitored overhead: ODUk-PM-BDI Direction: Received from the board-internal G.805 Matrix and, if applicable, sent towards … |
| 1.3.6.1.4.1.8708.2.55.2.4.1.1.13 | ColumnifOtnMonPmTxAlarmIndicationSignal | read-only | current | Tx Alarm indication signal (AIS). Monitored overhead: ODUk-PM-AIS Direction: Received from the board-internal G.805 Matrix and, if applicable, sent towards the… |
| 1.3.6.1.4.1.8708.2.55.2.4.1.1.14 | ColumnifOtnMonPmTxOpenConnectionIndication | read-only | current | Tx Open connection indication (OCI). Monitored overhead: ODUk-PM-AIS Direction: Received from the board-internal G.805 Matrix and, if applicable, sent towards … |
| 1.3.6.1.4.1.8708.2.55.2.4.1.1.15 | ColumnifOtnMonPmTxLockedDefectIndication | read-only | current | Tx Locked Defect Indication (LCK). Monitored overhead: ODUk-PM-LCK Direction: Received from the board-internal G.805 Matrix and, if applicable, sent towards th… |
| 1.3.6.1.4.1.8708.2.55.2.4.1.1.16 | ColumnifOtnMonPmUpPortId | read-only | current | Internal port reference for traffic unit. |
| 1.3.6.1.4.1.8708.2.55.2.5 | NodeifOtnMonTraceList | |||
| 1.3.6.1.4.1.8708.2.55.2.5.1 | TableifOtnMonTraceTable | not-accessible | current | The trace group contains information and configuration for the trace objects defined in G.709. |
| 1.3.6.1.4.1.8708.2.55.2.5.1.1 | RowifOtnMonTraceEntry | not-accessible | current | An entry in the ifOtnMon trace list. |
| 1.3.6.1.4.1.8708.2.55.2.5.1.1.1 | ColumnifOtnMonTraceIndex | read-only | current | An index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.55.2.5.1.1.2 | ColumnifOtnMonTraceName | read-create | current | The management name of the OTN trace, for example 'clientSmTrace:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourt… |
| 1.3.6.1.4.1.8708.2.55.2.5.1.1.3 | ColumnifOtnMonTraceConnOtnType | read-only | current | What type of monitoring object the trace is related to. sm - Section monitoring (SM). pm - Path monitoring (PM). tcm1 - Tandem connection monitoring (TCM) tcm2… |
| 1.3.6.1.4.1.8708.2.55.2.5.1.1.4 | ColumnifOtnMonTraceConnOtnIndex | read-only | current | An index that describes to which index in SM, TCM or PM table this object is related. |
| 1.3.6.1.4.1.8708.2.55.2.5.1.1.5 | ColumnifOtnMonTraceSapiTraceTransmitted | read-write | current | The Source Access Point Identifier to be transmitted from this interface. Note, it is only possible to enter 15 characters since the first character is added a… |
| 1.3.6.1.4.1.8708.2.55.2.5.1.1.6 | ColumnifOtnMonTraceSapiTraceReceivedByte0 | read-only | deprecated | The received Source Access Point Identifier for this interface. The value 255 is used by SNMP agent to show that the attribute is not valid in current configur… |
| 1.3.6.1.4.1.8708.2.55.2.5.1.1.7 | ColumnifOtnMonTraceSapiTraceReceived | read-only | current | The received Source Access Point Identifier for this interface. The trace _notApplicable_ is used to tell SNMP clients that this attribute is not used in curre… |
| 1.3.6.1.4.1.8708.2.55.2.5.1.1.8 | ColumnifOtnMonTraceSapiTraceExpected | read-write | current | SAPI used for matching against the received SAPI. Note, it is only possible to enter 15 characters since first character is added automatically according to st… |
| 1.3.6.1.4.1.8708.2.55.2.5.1.1.9 | ColumnifOtnMonTraceDapiTraceTransmitted | read-write | current | The Destination Access Point Identifier to be transmitted from this interface. Note, it is only possible to enter 15 characters since first character is added … |
| 1.3.6.1.4.1.8708.2.55.2.5.1.1.10 | ColumnifOtnMonTraceDapiTraceReceivedByte0 | read-only | deprecated | The received Destination Access Point Identifier for this interface. The value 255 is used by SNMP agent to show that the attribute is not valid in current con… |
| 1.3.6.1.4.1.8708.2.55.2.5.1.1.11 | ColumnifOtnMonTraceDapiTraceReceived | read-only | current | The received Destination Access Point Identifier for this interface. The trace _notApplicable_ is used to tell SNMP clients that this attribute is not used in … |
| 1.3.6.1.4.1.8708.2.55.2.5.1.1.12 | ColumnifOtnMonTraceDapiTraceExpected | read-write | current | DAPI used for matching against the received DAPI. Note, it is only possible to enter 15 characters since the first character is added automatically according t… |
| 1.3.6.1.4.1.8708.2.55.2.5.1.1.13 | ColumnifOtnMonTraceOpSpecificTraceTransmitted | read-write | current | The operator specific trace identifier to be transmitted from this interface. Set to empty string for default value. <IP address>:<subrack>:<slo… |
| 1.3.6.1.4.1.8708.2.55.2.5.1.1.14 | ColumnifOtnMonTraceOpSpecificTraceReceived | read-only | current | The received operator specific trace identifier for this interface. The trace _notApplicable_ is used to tell SNMP clients that this attribute is not used in c… |
| 1.3.6.1.4.1.8708.2.55.2.5.1.1.15 | ColumnifOtnMonTraceTraceIdMMDetectionMode | read-write | current | The method to detect a trace identifier mismatch value. off - Mismatch will be ignored on all levels sapi - Mismatch is based on mismatch in expected and recei… |
| 1.3.6.1.4.1.8708.2.55.2.5.1.1.16 | ColumnifOtnMonTraceTraceAlarmMode | read-only | deprecated | Controls if the trace identifier mismatch alarm should be raised. If trace alarm mode is enabled and if object is set in terminating or monitor mode, BDI is se… |
| 1.3.6.1.4.1.8708.2.55.2.5.1.1.17 | ColumnifOtnMonTraceTIMConsequenceActionsDisabled | read-only | current | Controls if the trace identifier mismatch should give rise to any consequent actions in the downstream direction. Consequent actions for the upstream direction… |
| 1.3.6.1.4.1.8708.2.55.2.5.1.1.18 | ColumnifOtnMonTraceTxSignalStatus | read-only | current | The state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. |
| 1.3.6.1.4.1.8708.2.55.2.5.1.1.19 | ColumnifOtnMonTraceRxSignalStatus | read-only | current | The state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. |
| 1.3.6.1.4.1.8708.2.55.2.5.1.1.20 | ColumnifOtnMonTraceTraceMismatch | read-only | current | Trace identifier mismatch (TIM). Indicates if the expected SM/PM/TCM trace identifier (SAPI and/or DAPI) differs from the received trace identifier. Reference:… |
| 1.3.6.1.4.1.8708.2.55.2.5.1.1.21 | ColumnifOtnMonTraceConnOtnDirection | read-only | current | Direction of the trail trace identifier object on the interface. none - Direction is unambiguous. rx - Received from the board-internal G.805 Matrix and, if ap… |
| 1.3.6.1.4.1.8708.2.55.2.5.1.1.22 | ColumnifOtnMonTraceUpPortId | read-only | current | Internal port reference for traffic unit. |