MIB Viewer

LUM-IFPHYSICAL-MIB

79 objects
The MIB module for management of physical port objects. This module describes the physical layer in ITU-T Recommendation G.709. The tables contained in this MIB are: (1) The General group contains some general attributes as time stamps and tables sizes. (2) The Trx group contains information and configuration for all transceiver objects. (3) The Cage group contains information and configuration for all cage objects.
Imported Objects
LUM-REGlumIfPhysicalMIB lumModules
LUM-TC MISSINGAutoLambdaCapability CommandString DisplayStringWithNA FaultStatusWithNA Integer32WithNA MgmtNameString ResetWithNA SignalStatusWithNA SubrackNumber TruthValueWithNA TrxMediaWithNA Unsigned32WithNA
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIMODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCDateAndTime DisplayString
OIDNameAccessStatusDescription
1.3.6.1.4.1.8708.1.1.47IdentitylumIfPhysicalMIBModuleThe MIB module for management of physical port objects. This module describes the physical layer in ITU-T Recommendation G.709. The tables contained in this MI…
1.3.6.1.4.1.8708.2.47.1NodelumIfPhysicalConfs
1.3.6.1.4.1.8708.2.47.1.1NodelumIfPhysicalGroups
1.3.6.1.4.1.8708.2.47.1.1.1GroupifPhysicalGeneralGroupV1deprecatedThe general objects.
1.3.6.1.4.1.8708.2.47.1.1.2GroupifPhysicalTrxGroupV1deprecatedThe ifPhysical transceiver objects (R20.0).
1.3.6.1.4.1.8708.2.47.1.1.3GroupifPhysicalTrxGroupV2deprecatedThe ifPhysical transceiver objects (R23.1).
1.3.6.1.4.1.8708.2.47.1.1.4GroupifPhysicalTrxGroupV3deprecatedThe ifPhysical transceiver objects (R24).
1.3.6.1.4.1.8708.2.47.1.1.5GroupifPhysicalTrxGroupV4deprecatedThe ifPhysical transceiver objects (R25).
1.3.6.1.4.1.8708.2.47.1.1.6GroupifPhysicalTrxGroupV5deprecatedThe ifPhysical transceiver objects (R27.1).
1.3.6.1.4.1.8708.2.47.1.1.7GroupifPhysicalGeneralGroupV2currentThe general objects.
1.3.6.1.4.1.8708.2.47.1.1.8GroupifPhysicalCageGroupV1currentThe ifPhysical cage objects (R28.0).
1.3.6.1.4.1.8708.2.47.1.1.9GroupifPhysicalTrxGroupV6deprecatedThe ifPhysical transceiver objects (R28.0).
1.3.6.1.4.1.8708.2.47.1.1.10GroupifPhysicalTrxGroupV7deprecatedThe ifPhysical transceiver objects (R28.1).
1.3.6.1.4.1.8708.2.47.1.1.11GroupifPhysicalTrxGroupV8deprecatedThe ifPhysical transceiver objects (R32.1).
1.3.6.1.4.1.8708.2.47.1.1.12GroupifPhysicalTrxGroupV9currentThe ifPhysical transceiver objects (R33.1).
1.3.6.1.4.1.8708.2.47.1.2NodelumIfPhysicalCompl
1.3.6.1.4.1.8708.2.47.1.2.1CompliancelumIfPhysicalComplV1deprecatedBasic implementation requirements for the ifPhysical MIB. (R20.0)
1.3.6.1.4.1.8708.2.47.1.2.2CompliancelumIfPhysicalComplV2deprecatedBasic implementation requirements for the ifPhysical MIB. (R23.1)
1.3.6.1.4.1.8708.2.47.1.2.3CompliancelumIfPhysicalComplV3deprecatedBasic implementation requirements for the ifPhysical MIB. (R24)
1.3.6.1.4.1.8708.2.47.1.2.4CompliancelumIfPhysicalComplV4deprecatedBasic implementation requirements for the ifPhysical MIB. (27.1)
1.3.6.1.4.1.8708.2.47.1.2.5CompliancelumIfPhysicalComplV5deprecatedBasic implementation requirements for the ifPhysical MIB. (28.0)
1.3.6.1.4.1.8708.2.47.1.2.6CompliancelumIfPhysicalComplV6deprecatedBasic implementation requirements for the ifPhysical MIB. (28.1)
1.3.6.1.4.1.8708.2.47.1.2.7CompliancelumIfPhysicalComplV7deprecatedBasic implementation requirements for the ifPhysical MIB. (32.1)
1.3.6.1.4.1.8708.2.47.1.2.8CompliancelumIfPhysicalComplV8currentBasic implementation requirements for the ifPhysical MIB. (33.1)
1.3.6.1.4.1.8708.2.47.2NodelumIfPhysicalMIBObjects
1.3.6.1.4.1.8708.2.47.2.1NodeifPhysicalGeneral
1.3.6.1.4.1.8708.2.47.2.1.1ScalarifPhysicalGeneralConfigLastChangeTimeread-onlycurrentThe time when the configuration of the MIB was last changed.
1.3.6.1.4.1.8708.2.47.2.1.2ScalarifPhysicalGeneralStateLastChangeTimeread-onlycurrentThe time when the state and/or configuration of the MIB was last changed.
1.3.6.1.4.1.8708.2.47.2.1.3ScalarifPhysicalGeneralIfPhysicalTrxTableSizeread-onlycurrentSize of transceiver table
1.3.6.1.4.1.8708.2.47.2.1.4ScalarifPhysicalGeneralIfPhysicalTrxConfigLastChangeTimeread-onlycurrentThe time when the configuration of the table was last changed.
1.3.6.1.4.1.8708.2.47.2.1.5ScalarifPhysicalGeneralIfPhysicalTrxStateLastChangeTimeread-onlycurrentThe time when the state and/or configuration of the MIB was last changed.
1.3.6.1.4.1.8708.2.47.2.1.6ScalarifPhysicalGeneralIfPhysicalCageTableSizeread-onlycurrentSize of transceiver table
1.3.6.1.4.1.8708.2.47.2.1.7ScalarifPhysicalGeneralIfPhysicalCageConfigLastChangeTimeread-onlycurrentThe time when the configuration of the table was last changed.
1.3.6.1.4.1.8708.2.47.2.1.8ScalarifPhysicalGeneralIfPhysicalCageStateLastChangeTimeread-onlycurrentThe time when the state and/or configuration of the MIB was last changed.
1.3.6.1.4.1.8708.2.47.2.2NodeifPhysicalTrxList
1.3.6.1.4.1.8708.2.47.2.2.1TableifPhysicalTrxTablenot-accessiblecurrentThe if physical trx interface list.
1.3.6.1.4.1.8708.2.47.2.2.1.1RowifPhysicalTrxEntrynot-accessiblecurrentAn entry in the ifPhysical trx list.
1.3.6.1.4.1.8708.2.47.2.2.1.1.1ColumnifPhysicalTrxIndexread-onlycurrentAn index assigned to each entry.
1.3.6.1.4.1.8708.2.47.2.2.1.1.2ColumnifPhysicalTrxNameread-onlycurrentThe management name of the transceiver, for example 'trx:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are th…
1.3.6.1.4.1.8708.2.47.2.2.1.1.3ColumnifPhysicalTrxConnIfBasicIfIndexread-onlycurrentAn index describing to which index in ifBasicIf table this object is related to.
1.3.6.1.4.1.8708.2.47.2.2.1.1.4ColumnifPhysicalTrxLaserBiasread-onlycurrentMeasures laser bias current value in tenth of mA (0.1 mA).
1.3.6.1.4.1.8708.2.47.2.2.1.1.5ColumnifPhysicalTrxLaserTempread-onlycurrentThe actual laser temperature in units of 0.1 degrees Centigrades.
1.3.6.1.4.1.8708.2.47.2.2.1.1.6ColumnifPhysicalTrxTrxClassread-onlycurrentString that describes the transceiver class.
1.3.6.1.4.1.8708.2.47.2.2.1.1.7ColumnifPhysicalTrxTrxMediaread-writecurrentDefines the transceiver media. For example 'optical' or 'electrical'.
1.3.6.1.4.1.8708.2.47.2.2.1.1.8ColumnifPhysicalTrxActualTrxMediaread-onlycurrentDefines the media and capability of the TRX.
1.3.6.1.4.1.8708.2.47.2.2.1.1.9ColumnifPhysicalTrxTxSignalStatusread-onlycurrentThe state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.
1.3.6.1.4.1.8708.2.47.2.2.1.1.10ColumnifPhysicalTrxRxSignalStatusread-onlycurrentThe state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.
1.3.6.1.4.1.8708.2.47.2.2.1.1.11ColumnifPhysicalTrxTransmitterFailedread-onlycurrentTransmitter failed. The transceiver hardware has detected a failure in the transmitter part. Alarm - The transmitter has failed Ok - The transmitter is OK again
1.3.6.1.4.1.8708.2.47.2.2.1.1.12ColumnifPhysicalTrxNonQualifiedTrxread-onlycurrentNon-qualified transceiver. The inserted transceiver does not have a legal manufacturer code. Alarm - A non-qualified transceiver is inserted. Ok - The transcei…
1.3.6.1.4.1.8708.2.47.2.2.1.1.13ColumnifPhysicalTrxTrxMissingread-onlycurrentTransceiver missing. An expected transceiver is missing. Alarm - An expected transceiver is missing. Ok - The missing transceiver is inserted.
1.3.6.1.4.1.8708.2.47.2.2.1.1.14ColumnifPhysicalTrxTrxMediaMismatchread-onlycurrentTransceiver media mismatch. The TRX media does not match the expected one. Alarm - Invalid or mismatching trx media is detected. Ok - The (pluggable) transceiv…
1.3.6.1.4.1.8708.2.47.2.2.1.1.15ColumnifPhysicalTrxTrxRxStateread-onlycurrentThe current Rx state of the transciever, in case it is a coherent CFP. The unit is ready if state=Ready. The states could be one of the followings: Rx State: I…
1.3.6.1.4.1.8708.2.47.2.2.1.1.16ColumnifPhysicalTrxTrxTxStateread-onlycurrentThe current Tx state of the transciever, in case it is a coherent CFP. The unit is ready if state=Ready. The states could be one of the followings: Tx State: I…
1.3.6.1.4.1.8708.2.47.2.2.1.1.17ColumnifPhysicalTrxOpticalLayerMappingMismatchread-onlycurrentThe inserted transceiver does not support the configuration of the optical layer mapping. alarm: A transceiver with other supported optical layer mapping than …
1.3.6.1.4.1.8708.2.47.2.2.1.1.18ColumnifPhysicalTrxPowerCycleResetread-onlycurrentWhen the attribute is set to reset the trx power cycle is re-initialised, meaning the trx is cold started. Then the attribute is set to normal again automatica…
1.3.6.1.4.1.8708.2.47.2.2.1.1.19ColumnifPhysicalTrxUIdread-onlycurrentAn index assigned to each entry.
1.3.6.1.4.1.8708.2.47.2.2.1.1.20ColumnifPhysicalTrxAidread-onlycurrentThe access identifier (AID) of the trx. The format is according to GR-833.
1.3.6.1.4.1.8708.2.47.2.2.1.1.21ColumnifPhysicalTrxPhysicalLocationread-onlycurrentThe physical location of the trx. The format is according to GR-833.
1.3.6.1.4.1.8708.2.47.2.2.1.1.22ColumnifPhysicalTrxPowerOutOfRangeread-onlycurrentThe power classification of the transceiver exceeds the design limit of the board. alarm: A transceiver with a power classification that exceeds the design lim…
1.3.6.1.4.1.8708.2.47.2.2.1.1.23ColumnifPhysicalTrxLowTempread-onlycurrentThe temperature of the transceiver is below its designed limit. alarm: The temperature of the transceiver is below its designed limit. ok: The temperature of t…
1.3.6.1.4.1.8708.2.47.2.2.1.1.24ColumnifPhysicalTrxCommunicationFailureread-onlycurrentThe board is unable to communicate with the transceiver. alarm: Protocol errors detected on the transceiver control link. ok: No communication errors detected …
1.3.6.1.4.1.8708.2.47.2.2.1.1.25ColumnifPhysicalTrxSignalFormatNotSupportedread-onlycurrentThe signal format is not supported on this transceiver. alarm: Signal format not supported. ok: Signal format supported.
1.3.6.1.4.1.8708.2.47.2.2.1.1.26ColumnifPhysicalTrxTunableread-onlycurrentThe transceiver is of tunable type.
1.3.6.1.4.1.8708.2.47.2.2.1.1.27ColumnifPhysicalTrxEncrCommunicationFailureread-onlycurrentThe board is unable to communicate with the transceiver for encryption related configuration. alarm: Protocol errors detected on the transceiver encryption con…
1.3.6.1.4.1.8708.2.47.2.2.1.1.28ColumnifPhysicalTrxDoesNotSupportEncryptionread-onlycurrentNon-Encryption capable TRX installed. alarm: Non-Encryption capable TRX installed. ok: Encryption capable TRX installed.
1.3.6.1.4.1.8708.2.47.2.2.1.1.29ColumnifPhysicalTrxSelfTestDataCorruptionread-onlycurrentTRX self-test data corruption. alarm: TRX self-test data is corrupted. ok: TRX self-test data is okay.
1.3.6.1.4.1.8708.2.47.2.2.1.1.30ColumnifPhysicalTrxAutoLambdaCapabilityread-onlycurrentThe Auto Lambda capability of the TRX. none - Inserted TRX does not support auto lambda notApplicable - Interface does not support auto lambda or TRX is not in…
1.3.6.1.4.1.8708.2.47.2.3NodeifPhysicalCageList
1.3.6.1.4.1.8708.2.47.2.3.1TableifPhysicalCageTablenot-accessiblecurrentThe if physical cage list.
1.3.6.1.4.1.8708.2.47.2.3.1.1RowifPhysicalCageEntrynot-accessiblecurrentAn entry in the ifPhysical cage list.
1.3.6.1.4.1.8708.2.47.2.3.1.1.1ColumnifPhysicalCageIndexread-onlycurrentAn index assigned to each entry.
1.3.6.1.4.1.8708.2.47.2.3.1.1.2ColumnifPhysicalCageNameread-onlycurrentThe management name of the cage, for example 'cage:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are the phys…
1.3.6.1.4.1.8708.2.47.2.3.1.1.3ColumnifPhysicalCageConnIfBasicIfIndexread-onlycurrentAn index describing to which index in ifBasicIf table this object is related to.
1.3.6.1.4.1.8708.2.47.2.3.1.1.4ColumnifPhysicalCageSubrackread-onlycurrentThe number of the subrack in which the cage module is present.
1.3.6.1.4.1.8708.2.47.2.3.1.1.5ColumnifPhysicalCageSlotread-onlycurrentThe number of the slot in which the cage module is present.
1.3.6.1.4.1.8708.2.47.2.3.1.1.6ColumnifPhysicalCageAidread-onlycurrentThe access identifier (AID) of the cage. The format is according to GR-833.
1.3.6.1.4.1.8708.2.47.2.3.1.1.7ColumnifPhysicalCagePhysicalLocationread-onlycurrentThe physical location of the cage. The format is according to GR-833.
1.3.6.1.4.1.8708.2.47.2.3.1.1.8ColumnifPhysicalCageEquippedread-onlycurrentIs the entity equipped.
1.3.6.1.4.1.8708.2.47.2.3.1.1.9ColumnifPhysicalCageUIdread-onlycurrentAn index assigned to each entry.