MIB Viewer

LUM-OA-MIB

222 objects
The optical amplifier interface MIB. - General - Amplifier interfaces
Imported Objects
LUM-REGlumModules lumOaMIB
LUM-TC MISSINGBoardOrInterfaceAdminStatus BoardOrInterfaceOperStatus CommandString FaultStatus LambdaFrequency MgmtNameString ObjectProperty PortNumber SlotNumber SubrackNumber
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIInteger32 MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCDateAndTime DisplayString TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.8708.1.1.20IdentitylumOaMIBModuleThe optical amplifier interface MIB. - General - Amplifier interfaces
1.3.6.1.4.1.8708.2.19.1NodelumOaConfs
1.3.6.1.4.1.8708.2.19.1.1NodelumOaGroups
1.3.6.1.4.1.8708.2.19.1.1.1GroupoaGeneralGroupdeprecatedThe general objects.
1.3.6.1.4.1.8708.2.19.1.1.2GroupoaIfGroupdeprecatedThe oa interface objects.
1.3.6.1.4.1.8708.2.19.1.1.3GroupoaIfGroupV2deprecatedThe oa interface objects.
1.3.6.1.4.1.8708.2.19.1.1.4GroupoaIfGroupV3deprecatedThe oa interface objects.
1.3.6.1.4.1.8708.2.19.1.1.5GroupoaGeneralGroupV2currentThe general objects. (3.1)
1.3.6.1.4.1.8708.2.19.1.1.6GroupoaIfGroupV4deprecatedThe oa interface objects. (3.2)
1.3.6.1.4.1.8708.2.19.1.1.7GroupoaIfGroupV5currentThe oa interface objects. (4.0)
1.3.6.1.4.1.8708.2.19.1.1.8GroupoaIfGroupV6deprecatedThe oa interface objects. (5.0)
1.3.6.1.4.1.8708.2.19.1.1.9GroupoaVoaIfGroupV1currentThe voa interface objects. (5.0)
1.3.6.1.4.1.8708.2.19.1.1.10GroupoaIfGroupV7deprecatedThe oa interface objects. (6.0)
1.3.6.1.4.1.8708.2.19.1.1.11GroupoaIfGroupV8deprecatedThe oa interface objects. (10.0)
1.3.6.1.4.1.8708.2.19.1.1.12GroupoaVoaClientIfGroupV1deprecatedThe voa client interface objects. (10.0)
1.3.6.1.4.1.8708.2.19.1.1.13GroupoaVoaLineIfGroupV1currentThe voa line interface objects. (10.0)
1.3.6.1.4.1.8708.2.19.1.1.14GroupoaGeneralGroupV3deprecatedThe general objects. (10.0)
1.3.6.1.4.1.8708.2.19.1.1.15GroupoaVoaClientIfGroupV2deprecatedThe voa client interface objects. (11.0)
1.3.6.1.4.1.8708.2.19.1.1.16GroupoaModuleGroupV1deprecatedThe module objects. (11.0)
1.3.6.1.4.1.8708.2.19.1.1.17GroupoaGeneralGroupV4currentThe general objects. (11.0)
1.3.6.1.4.1.8708.2.19.1.1.18GroupoaIfGroupV9deprecatedThe oa interface objects. (11.0)
1.3.6.1.4.1.8708.2.19.1.1.19GroupoaModuleGroupV2deprecatedThe module objects. (12.0)
1.3.6.1.4.1.8708.2.19.1.1.20GroupoaIfGroupV10deprecatedThe oa interface objects. (15.0)
1.3.6.1.4.1.8708.2.19.1.1.21GroupoaIfGroupV11deprecatedThe oa interface objects. (17.0)
1.3.6.1.4.1.8708.2.19.1.1.22GroupoaVoaClientIfGroupV3currentThe voa client interface objects. (19.0)
1.3.6.1.4.1.8708.2.19.1.1.23GroupoaIfGroupV12deprecatedThe oa interface objects. (20.0)
1.3.6.1.4.1.8708.2.19.1.1.24GroupoaModuleGroupV3deprecatedThe module objects. (23.0)
1.3.6.1.4.1.8708.2.19.1.1.25GroupoaIfGroupV13deprecatedThe oa interface objects. (23.0)
1.3.6.1.4.1.8708.2.19.1.1.26GroupoaIfGroupV14currentThe oa interface objects. (24.0)
1.3.6.1.4.1.8708.2.19.1.1.27GroupoaIfGroupV15currentThe oa interface objects. (27.0)
1.3.6.1.4.1.8708.2.19.1.1.28GroupoaModuleGroupV4currentThe module objects. (28.0)
1.3.6.1.4.1.8708.2.19.1.2NodelumOaCompl
1.3.6.1.4.1.8708.2.19.1.2.1CompliancelumOaBasicComplV1deprecatedBasic implementation requirements for the OA MIB V1.
1.3.6.1.4.1.8708.2.19.1.2.2CompliancelumOaBasicComplV2deprecatedBasic implementation requirements for the OA MIB V2.
1.3.6.1.4.1.8708.2.19.1.2.3CompliancelumOaBasicComplV3deprecatedBasic implementation requirements for the OA MIB V3.
1.3.6.1.4.1.8708.2.19.1.2.4CompliancelumOaBasicComplV4deprecatedBasic implementation requirements for the OA MIB V4 (3.1).
1.3.6.1.4.1.8708.2.19.1.2.5CompliancelumOaBasicComplV5deprecatedBasic implementation requirements for the OA MIB V5 (3.2).
1.3.6.1.4.1.8708.2.19.1.2.6CompliancelumOaBasicComplV6deprecatedBasic implementation requirements for the OA MIB V6 (4.0).
1.3.6.1.4.1.8708.2.19.1.2.7CompliancelumOaBasicComplV7deprecatedBasic implementation requirements for the OA MIB V7 (5.0).
1.3.6.1.4.1.8708.2.19.1.2.8CompliancelumOaBasicComplV8deprecatedBasic implementation requirements for the OA MIB V8 (6.0).
1.3.6.1.4.1.8708.2.19.1.2.9CompliancelumOaBasicComplV9deprecatedBasic implementation requirements for the OA MIB V9 (10.0).
1.3.6.1.4.1.8708.2.19.1.2.10CompliancelumOaBasicComplV10deprecatedBasic implementation requirements for the OA MIB V10 (11.0).
1.3.6.1.4.1.8708.2.19.1.2.11CompliancelumOaBasicComplV11deprecatedBasic implementation requirements for the OA MIB V11 (12.0).
1.3.6.1.4.1.8708.2.19.1.2.12CompliancelumOaBasicComplV12deprecatedBasic implementation requirements for the OA MIB V12 (15.0).
1.3.6.1.4.1.8708.2.19.1.2.13CompliancelumOaBasicComplV13deprecatedBasic implementation requirements for the OA MIB V13 (17.0).
1.3.6.1.4.1.8708.2.19.1.2.14CompliancelumOaBasicComplV14deprecatedBasic implementation requirements for the OA MIB V14 (19.0).
1.3.6.1.4.1.8708.2.19.1.2.15CompliancelumOaBasicComplV15deprecatedBasic implementation requirements for the OA MIB V14 (20.0).
1.3.6.1.4.1.8708.2.19.1.2.16CompliancelumOaBasicComplV16deprecatedBasic implementation requirements for the OA MIB V16 (23.0).
1.3.6.1.4.1.8708.2.19.1.2.17CompliancelumOaBasicComplV17deprecatedBasic implementation requirements for the OA MIB V16 (24.0).
1.3.6.1.4.1.8708.2.19.1.2.18CompliancelumOaBasicComplV18deprecatedBasic implementation requirements for the OA MIB V16 (27.0).
1.3.6.1.4.1.8708.2.19.1.2.19CompliancelumOaBasicComplV19currentBasic implementation requirements for the OA MIB V17 (28.0).
1.3.6.1.4.1.8708.2.19.1.3NodelumOaMinimalGroups
1.3.6.1.4.1.8708.2.19.1.4NodelumOaMinimalCompl
1.3.6.1.4.1.8708.2.19.1.4.1CompliancelumOaMinimalComplV1currentMinimal implementation requirements for the OA MIB V1.
1.3.6.1.4.1.8708.2.19.2NodelumOaMIBObjects
1.3.6.1.4.1.8708.2.19.2.1NodeoaGeneral
1.3.6.1.4.1.8708.2.19.2.1.1ScalaroaGeneralLastChangeTimeread-onlycurrentThe time when the configuration of the MIB was last changed.
1.3.6.1.4.1.8708.2.19.2.1.2ScalaroaGeneralStateLastChangeTimeread-onlycurrentThe time when the state of the MIB was last changed.
1.3.6.1.4.1.8708.2.19.2.1.3ScalaroaGeneralOaIfTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.19.2.1.4ScalaroaGeneralVoaIfTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.19.2.1.5ScalaroaGeneralVoaClientIfTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.19.2.1.6ScalaroaGeneralVoaLineIfTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.19.2.1.7ScalaroaGeneralOaModuleTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.19.2.2NodeoaIfList
1.3.6.1.4.1.8708.2.19.2.2.1TableoaIfTablenot-accessiblecurrentThe interface list.
1.3.6.1.4.1.8708.2.19.2.2.1.1RowoaIfEntrynot-accessiblecurrentAn entry in the interface list.
1.3.6.1.4.1.8708.2.19.2.2.1.1.1ColumnoaIfIndexread-onlycurrentAn arbitrary index assigned to each entry.
1.3.6.1.4.1.8708.2.19.2.2.1.1.2ColumnoaIfNameread-onlycurrentThe management name of the interface, for example 'oa:1:2:1-2', where the first number indicates sub-rack, the second slot number and the third is the port num…
1.3.6.1.4.1.8708.2.19.2.2.1.1.3ColumnoaIfDescrread-writecurrentUser configurable label.
1.3.6.1.4.1.8708.2.19.2.2.1.1.4ColumnoaIfSubrackread-createcurrentThe number of the subrack where the interface is located.
1.3.6.1.4.1.8708.2.19.2.2.1.1.5ColumnoaIfSlotread-createcurrentThe number of the slot where the interface is located.
1.3.6.1.4.1.8708.2.19.2.2.1.1.6ColumnoaIfTxPortread-createcurrentThe number of the port where the TX-side of the interface is located.
1.3.6.1.4.1.8708.2.19.2.2.1.1.7ColumnoaIfRxPortread-createcurrentThe number of the port where the RX-side of the interface is located.
1.3.6.1.4.1.8708.2.19.2.2.1.1.8ColumnoaIfInvPhysIndexOrZeroread-onlycurrentThe row in the invPhysTable for this interface. Set to 0 if not known.
1.3.6.1.4.1.8708.2.19.2.2.1.1.9ColumnoaIfAdminStatusread-writecurrentThe administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. Intended f…
1.3.6.1.4.1.8708.2.19.2.2.1.1.10ColumnoaIfOperStatusread-onlycurrentThe operational state for the interface. notPresent - The physical resources are not available. down - The interface is de-activated or the are faults preventi…
1.3.6.1.4.1.8708.2.19.2.2.1.1.11ColumnoaIfLaserStatusread-onlycurrentThe operational state of the laser. off - The laser is turned off. on - The laser is turned on.
1.3.6.1.4.1.8708.2.19.2.2.1.1.12ColumnoaIfAmplifierTyperead-createcurrentThe type of amplifier for this interface. preAmp25GAd - pre-amplifier for 2.5 G, add-drop preAmp25GTm - pre-amplifier for 2.5 G, terminal multiplexor powAmp10G…
1.3.6.1.4.1.8708.2.19.2.2.1.1.13ColumnoaIfWantedAbsolutePowerLevelread-writecurrentFor powAmp10G and constantPower, the user can give the wanted absolute power level in units of 0.1 dBm. For OA10 and OA17 in constantGain and constantSignalPow…
1.3.6.1.4.1.8708.2.19.2.2.1.1.14ColumnoaIfWantedRelativePowerLevelread-writecurrentWanted offset from production setting in units of 0.1 dBm. Applicable for preAmp25GAd and preAmp10GAd. Note that the output power level is dependent on the pow…
1.3.6.1.4.1.8708.2.19.2.2.1.1.15ColumnoaIfWantedGainread-writecurrentSignal gain setting in units of 0.1 dB. Applicable for preAmp25GTm, preAmp10GTm and constantGain/LI/HI. This attribute can be written via SNMP.
1.3.6.1.4.1.8708.2.19.2.2.1.1.16ColumnoaIfFrequencyMinread-writecurrentLowest amplified freqency in hundreds of GHz (0.01 GHz). Supported range 19210 ... 19590 (c921 .. c959)
1.3.6.1.4.1.8708.2.19.2.2.1.1.17ColumnoaIfFrequencyMaxread-writecurrentHighest amplified freqency in hundreds of GHz (0.01 GHz). Supported range 19210 ... 19590 (c921 .. c959)
1.3.6.1.4.1.8708.2.19.2.2.1.1.18ColumnoaIfNominalTxPowerread-onlycurrentThe production setting for output power in units of 0.1 dBm.
1.3.6.1.4.1.8708.2.19.2.2.1.1.19ColumnoaIfTxPowerLevelread-onlycurrentThe transmitted power level in units of 0.1 dBm.
1.3.6.1.4.1.8708.2.19.2.2.1.1.20ColumnoaIfRxPowerLevelread-onlycurrentThe received power level in units of 0.1 dBm.
1.3.6.1.4.1.8708.2.19.2.2.1.1.21ColumnoaIfRxPowerLevelLowThresholdread-writecurrentThe lower threshold for received power level relative to the loss of signal threshold, in units of 0.1 dB.
1.3.6.1.4.1.8708.2.19.2.2.1.1.22ColumnoaIfLaserBiasread-onlycurrentMeasures laser bias current value in tenths of mA (0.1 mA).
1.3.6.1.4.1.8708.2.19.2.2.1.1.23ColumnoaIfNominalLaserTempread-onlycurrentThe pre-set laser temperature (0.1 deg C)
1.3.6.1.4.1.8708.2.19.2.2.1.1.24ColumnoaIfRelativeLaserTempread-onlycurrentThe current offset from the pre-set temperature in units of 0.1 degrees centigrade.
1.3.6.1.4.1.8708.2.19.2.2.1.1.25ColumnoaIfLossOfSignalThresholdread-writecurrentThe threshold for loss of signal. Note: Depending on the type of optical amplifier the value range may vary.
1.3.6.1.4.1.8708.2.19.2.2.1.1.26ColumnoaIfLossOfSignalread-onlycurrentLoss of signal. Applicable for all signal formats. A(ctivation): Active loss of signal HW indication. D(e-activation): Inactive loss of signal HW indication.
1.3.6.1.4.1.8708.2.19.2.2.1.1.27ColumnoaIfPumpLaserTempHighread-onlycurrentPump laser temperature too high. A(ctivation): Temperature exceedes threshold. D(e-activation): Temperature below threshold again.
1.3.6.1.4.1.8708.2.19.2.2.1.1.28ColumnoaIfRegulationProblemRxPowerHighread-onlycurrentThe input power is above meassuring range. A: The received power level exceeds the associated threshold. D: The received power level is 0.5 dBm below the thres…
1.3.6.1.4.1.8708.2.19.2.2.1.1.29ColumnoaIfRegulationProblemTxPowerHighread-onlycurrentThe output power is above meassuring range. A: The received power level exceeds the associated threshold. D: The received power level is 0.5 dBm below the thre…
1.3.6.1.4.1.8708.2.19.2.2.1.1.30ColumnoaIfRegulationProblemTxPowerLowread-onlycurrentThe output power is below meassuring range. A: The transmitted power level below the associated threshold. D: The transmitted power level is 0.5 dBm above the …
1.3.6.1.4.1.8708.2.19.2.2.1.1.31ColumnoaIfReceivedPowerLowread-onlycurrentReceived power level low threshold exceeded. A: The received power level is below the associated threshold. D: The received power level is 0.5 dBm above the th…
1.3.6.1.4.1.8708.2.19.2.2.1.1.32ColumnoaIfLaserBiasHighread-onlycurrentLaser bias high threshold exceeded. A: The laser bias current exceeds the associated threshold. D: The laser bias current is 0.5 mA below the associated thresh…
1.3.6.1.4.1.8708.2.19.2.2.1.1.33ColumnoaIfLaserTempControlFaultread-onlycurrentThe pump laser temperature exceeds the associated threshold. A: The temperature exceeds the value. D: The temperature is below the value.
1.3.6.1.4.1.8708.2.19.2.2.1.1.34ColumnoaIfHwMissingread-onlydeprecatedThe HW for this i/f is not present A: Wrong HW is inserted in subrack. D: Correct HW is inserted in subrack.
1.3.6.1.4.1.8708.2.19.2.2.1.1.35ColumnoaIfConfigurationCommandread-onlycurrentSelect which amplifier type to use. All modes are not applicable for all type of amplifier boards. constantGain: Amplifier will set output power according to t…
1.3.6.1.4.1.8708.2.19.2.2.1.1.36ColumnoaIfPumpLaserTempLowread-onlycurrentPump laser temperature too low. A(ctivation): Temperature exceedes threshold. D(e-activation): Temperature above threshold again.
1.3.6.1.4.1.8708.2.19.2.2.1.1.37ColumnoaIfLaserTempLowRelativeThresholdread-writecurrentThreshold for the Laser Temp Low alarm, expressed as an offset from a pre-set nominal temperature, in units of 0.1 degrees centigrade.
1.3.6.1.4.1.8708.2.19.2.2.1.1.38ColumnoaIfLaserTempHighRelativeThresholdread-writecurrentThreshold for the Laser Temp High alarm, expressed as an offset from a pre-set nominal temperature, in units of 0.1 degrees centigrade.
1.3.6.1.4.1.8708.2.19.2.2.1.1.39ColumnoaIfAmpTypeNotSupportedByHwread-onlycurrentThe HW revision does not support the selected amplifier type.
1.3.6.1.4.1.8708.2.19.2.2.1.1.40ColumnoaIfWantedSignalPowerLevelread-writecurrentWanted offset from production setting in units of 0.1 dBm. Applicable for preAmp25GAd and preAmp10GAd. Note that the output power level is dependent on the pow…
1.3.6.1.4.1.8708.2.19.2.2.1.1.41ColumnoaIfObjectPropertyread-onlycurrentProperty mask.
1.3.6.1.4.1.8708.2.19.2.2.1.1.42ColumnoaIfLaserForcedOnread-writecurrentWhen enabled, the laser control is on regardless of whether there is an input signal present or not. disabled - the laser control is activated first after inpu…
1.3.6.1.4.1.8708.2.19.2.2.1.1.43ColumnoaIfActualLaserTempread-onlycurrentThe current laser temperature in units of 0.1 degrees centigrade.
1.3.6.1.4.1.8708.2.19.2.2.1.1.44ColumnoaIfAutomaticPowerShutdownread-writecurrentWhen enabled, the laser is turned off if the input signal to the other gain block is lost. disabled - the laser is NOT affected by the other gain block. enable…
1.3.6.1.4.1.8708.2.19.2.2.1.1.45ColumnoaIfDisabledread-onlycurrentThe interface is disabled. A: Interface disabled. D: Interface enabled.
1.3.6.1.4.1.8708.2.19.2.2.1.1.46ColumnoaIfWantedPowerLimitread-writecurrentApplicable for constantGainLI/HI. Sets the maximum allowed output power. This attribute can be written via SNMP.
1.3.6.1.4.1.8708.2.19.2.2.1.1.47ColumnoaIfModuleInforead-onlycurrentInformation (for example firmware and serial number) about the module.
1.3.6.1.4.1.8708.2.19.2.2.1.1.48ColumnoaIfMonitorInsertionLossread-onlycurrentThe insertion loss for the monitor port. When the real insertion loss is not possible to read from unit (older HW revsions), 20 (default) dB will be shown whic…
1.3.6.1.4.1.8708.2.19.2.2.1.1.49ColumnoaIfNumMonitorInsertionLossread-onlycurrentThis is the same parameter as Monitor Port Insertion Loss. The difference is that you will not see if the value can be read from the port or not (if not 20 dB …
1.3.6.1.4.1.8708.2.19.2.2.1.1.50ColumnoaIfFunctionalTyperead-writecurrentThe functional type of amplifier. This attribute is ONLY used by TNM and the traffic is not affected if changed. undefined - default preAmp - pre-amplifier. Re…
1.3.6.1.4.1.8708.2.19.2.2.1.1.51ColumnoaIfActualGainread-onlycurrentActual measured gain in units of 0.1 dB.
1.3.6.1.4.1.8708.2.19.2.2.1.1.52ColumnoaIfSaturationFaultread-onlycurrentSaturation alarm threshold is passed. Actual Gain < (Wanted Gain -1 dB). The alarm can be cleared be cleared by reducing the wanted gain attribute.
1.3.6.1.4.1.8708.2.19.2.2.1.1.53ColumnoaIfWantedGainTiltread-writecurrentSettable gain tilt for variable gain OA in units of 0.1 dB. Positive gain tilt is defined as gain increasing wavelength. Negative gain tilt is defined as gain …
1.3.6.1.4.1.8708.2.19.2.2.1.1.54ColumnoaIfTxPowerLevelLowThresholdread-writecurrentThe lower threshold for transmitted power level transmits to the loss of signal threshold, in units of 0.1 dB.
1.3.6.1.4.1.8708.2.19.2.2.1.1.55ColumnoaIfLaserPumpBiasread-onlycurrentMeasures laser pump bias current in per cent (%) of max value.
1.3.6.1.4.1.8708.2.19.2.2.1.1.56ColumnoaIfCaseTempOutOfrangeread-onlycurrentThe module has shutdown automatically because of too high case temp (>85 degC) or too low case temp (-40 degC). A(ctivation): Case temperature exceedes pre-set…
1.3.6.1.4.1.8708.2.19.2.2.1.1.57ColumnoaIfLaserTempOutOfRangeread-onlycurrentthe module has shutdown automatically because of pump laser temp out of range (15-35 degC). A(ctivation): Laser temperature exceedes pre-set value. D(e-activat…
1.3.6.1.4.1.8708.2.19.2.2.1.1.58ColumnoaIfSupportsReadMonitorInsertionLossread-onlycurrentThis value tells whether a OA interface has the ability to read the insertion loss value for the monitor port on an interface. true: Insertion loss can be read…
1.3.6.1.4.1.8708.2.19.2.2.1.1.59ColumnoaIfTxSignalStatusread-onlycurrentThe operational state for outgoing (TX) signal of the interface. down - A fault that would lead to a protection switch has occurred. degraded - The signal qual…
1.3.6.1.4.1.8708.2.19.2.2.1.1.60ColumnoaIfRxSignalStatusread-onlycurrentThe operational state for incoming (RX) signal of the interface. down - A major fault has occurred degraded - The signal quality is impaired. up - The signal i…
1.3.6.1.4.1.8708.2.19.2.2.1.1.61ColumnoaIfOutputPowerFailread-onlycurrentOutput power failed alarm threshold is passed. Actual Gain < (Wanted Gain -1 dB) and Output Power < (Power Limit -1 dB).
1.3.6.1.4.1.8708.2.19.2.3NodelumentisOaNotifications
1.3.6.1.4.1.8708.2.19.2.4NodeoaVoaIfList
1.3.6.1.4.1.8708.2.19.2.4.1TableoaVoaIfTablenot-accessiblecurrentThe interface list.
1.3.6.1.4.1.8708.2.19.2.4.1.1RowoaVoaIfEntrynot-accessiblecurrentAn entry in the interface list.
1.3.6.1.4.1.8708.2.19.2.4.1.1.1ColumnoaVoaIfIndexread-onlycurrentAn arbitrary index assigned to each entry.
1.3.6.1.4.1.8708.2.19.2.4.1.1.2ColumnoaVoaIfNameread-onlycurrentThe management name of the interface, for example 'voa:1:2:1'.
1.3.6.1.4.1.8708.2.19.2.4.1.1.3ColumnoaVoaIfDescrread-writecurrentUser configurable label.
1.3.6.1.4.1.8708.2.19.2.4.1.1.4ColumnoaVoaIfSubrackread-onlycurrentThe number of the subrack where the interface is located.
1.3.6.1.4.1.8708.2.19.2.4.1.1.5ColumnoaVoaIfSlotread-onlycurrentThe number of the slot where the interface is located.
1.3.6.1.4.1.8708.2.19.2.4.1.1.6ColumnoaVoaIfTxPortread-onlycurrentThe number of the port where the TX part of the interface is located.
1.3.6.1.4.1.8708.2.19.2.4.1.1.7ColumnoaVoaIfRxPortread-onlycurrentThe number of the port where the RX part of the interface is located.
1.3.6.1.4.1.8708.2.19.2.4.1.1.8ColumnoaVoaIfInvPhysIndexOrZeroread-onlycurrentThe row in the invPhysTable for this interface. Set to 0 if not known.
1.3.6.1.4.1.8708.2.19.2.4.1.1.9ColumnoaVoaIfAdminStatusread-writecurrentThe administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. Intended f…
1.3.6.1.4.1.8708.2.19.2.4.1.1.10ColumnoaVoaIfOperStatusread-onlycurrentThe operational state for the interface. notPresent - The interface is not available. down - The interface is not used. up - The interface is active.
1.3.6.1.4.1.8708.2.19.2.4.1.1.11ColumnoaVoaIfObjectPropertyread-onlycurrentProperty mask.
1.3.6.1.4.1.8708.2.19.2.4.1.1.12ColumnoaVoaIfControlModeread-createcurrentThe control mode of the VOA channel. constPower - regulate slowly towards a given output power. constAttenuation - set a fix attenuation constPowerAtInstallati…
1.3.6.1.4.1.8708.2.19.2.4.1.1.13ColumnoaVoaIfWantedOutputPowerread-writecurrentThe wanted output power. Applicable for constPower.
1.3.6.1.4.1.8708.2.19.2.4.1.1.14ColumnoaVoaIfCurrentOutputPowerread-onlycurrentThe actual output power.
1.3.6.1.4.1.8708.2.19.2.4.1.1.15ColumnoaVoaIfRegulationRangeread-writecurrentAn offset below the wanted output power at which the 'Current Power Out Of Range' alarm shall be raised. When the current output power is so far below the want…
1.3.6.1.4.1.8708.2.19.2.4.1.1.16ColumnoaVoaIfWantedAttenuationread-writecurrentThe wanted attenuation. voa8ch: applicable for constAttenuation voa2ch: always applicable This attribute can be written via SNMP.
1.3.6.1.4.1.8708.2.19.2.4.1.1.17ColumnoaVoaIfCurrentAttenuationread-onlycurrentThe current attenuation. Applicable for constPower.
1.3.6.1.4.1.8708.2.19.2.4.1.1.18ColumnoaVoaIfSamplePeriodread-onlycurrentThe approximate period between 2 consecutive measurements of the output power
1.3.6.1.4.1.8708.2.19.2.4.1.1.19ColumnoaVoaIfOuputPowerControlFailureread-onlycurrentAlarm raised when the wanted output power can not be obtained. That is, even if the attenuation is reduced to zero, the wanted power can not be obtained.
1.3.6.1.4.1.8708.2.19.2.4.1.1.20ColumnoaVoaIfCurrentPowerOutOfRangeread-onlycurrentAlarm raised when the current output power is outside the 'regulation range'. The regulation range is defined by Wanted Output Power +/- Regulation Range At th…
1.3.6.1.4.1.8708.2.19.2.4.1.1.21ColumnoaVoaIfConfigurationCommandread-onlycurrentSelect which control mode to use: constPower constAttenuation
1.3.6.1.4.1.8708.2.19.2.4.1.1.22ColumnoaVoaIfInInstallationModeread-onlycurrentAlarm raised when the VOA is put in the mode constPowerAtInstallation.
1.3.6.1.4.1.8708.2.19.2.5NodeoaVoaClientIfList
1.3.6.1.4.1.8708.2.19.2.5.1TableoaVoaClientIfTablenot-accessiblecurrentThe interface list.
1.3.6.1.4.1.8708.2.19.2.5.1.1RowoaVoaClientIfEntrynot-accessiblecurrentAn entry in the interface list.
1.3.6.1.4.1.8708.2.19.2.5.1.1.1ColumnoaVoaClientIfIndexread-onlycurrentAn arbitrary index assigned to each entry.
1.3.6.1.4.1.8708.2.19.2.5.1.1.2ColumnoaVoaClientIfNameread-onlycurrentThe management name of the interface, for example 'voaClient:1:2:1' which indicates subrack 1, board 2 and port 1.
1.3.6.1.4.1.8708.2.19.2.5.1.1.3ColumnoaVoaClientIfDescrread-writecurrentUser configurable label.
1.3.6.1.4.1.8708.2.19.2.5.1.1.4ColumnoaVoaClientIfSubrackread-onlycurrentThe number of the subrack where the interface is located.
1.3.6.1.4.1.8708.2.19.2.5.1.1.5ColumnoaVoaClientIfSlotread-onlycurrentThe number of the slot where the interface is located.
1.3.6.1.4.1.8708.2.19.2.5.1.1.6ColumnoaVoaClientIfTxPortread-onlycurrentThe number of the port where the Tx part of the interface is located.
1.3.6.1.4.1.8708.2.19.2.5.1.1.7ColumnoaVoaClientIfRxPortread-onlycurrentThe number of the port where the Rx part of the interface is located.
1.3.6.1.4.1.8708.2.19.2.5.1.1.8ColumnoaVoaClientIfInvPhysIndexOrZeroread-onlycurrentThe row in the invPhysTable for this interface. Set to 0 if not known.
1.3.6.1.4.1.8708.2.19.2.5.1.1.9ColumnoaVoaClientIfAdminStatusread-writecurrentThe administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. Intended f…
1.3.6.1.4.1.8708.2.19.2.5.1.1.10ColumnoaVoaClientIfOperStatusread-onlycurrentThe operational state for the interface. notPresent - The interface is not available. down - The interface is not used. up - The interface is active.
1.3.6.1.4.1.8708.2.19.2.5.1.1.11ColumnoaVoaClientIfObjectPropertyread-onlycurrentProperty mask.
1.3.6.1.4.1.8708.2.19.2.5.1.1.12ColumnoaVoaClientIfControlModeread-createcurrentThe control mode of the VOA channel. constAttenuation - set a fix attenuation
1.3.6.1.4.1.8708.2.19.2.5.1.1.13ColumnoaVoaClientIfWantedAttenuationread-writecurrentThe wanted attenuation. Applicable for constAttenuation This attribute can be written via SNMP if not set to 2147483647.
1.3.6.1.4.1.8708.2.19.2.5.1.1.14ColumnoaVoaClientIfCurrentAttenuationread-onlycurrentThe current attenuation. Applicable in case of MDU40 boards.
1.3.6.1.4.1.8708.2.19.2.5.1.1.15ColumnoaVoaClientIfLambdaread-onlycurrentThe frequency given in hundreds of GHz (0.01 GHz). Set to 0 for transparent ports.
1.3.6.1.4.1.8708.2.19.2.5.1.1.16ColumnoaVoaClientIfAbsoluteAttenuationread-writecurrentThe wanted absolute attenuation including the insertion loss. This value can never be set below the upper limit of the insertion loss. VOA8CHSFP: The range is …
1.3.6.1.4.1.8708.2.19.2.5.1.1.17ColumnoaVoaClientIfVoa2CurrentAttenuationread-onlycurrentThis value shows the current set absolute attenua- tion on VOA8ch-II and voa8chsfp. This value is usually the same value as the absolute attenuation except whe…
1.3.6.1.4.1.8708.2.19.2.5.1.1.18ColumnoaVoaClientIfDecreaseAttenuationread-writecurrentThe wanted decrease of the current attenuation. This attribute can be written via SNMP.
1.3.6.1.4.1.8708.2.19.2.5.1.1.19ColumnoaVoaClientIfIncreaseAttenuationread-writecurrentThe wanted increase of the current attenuation. This attribute can be written via SNMP.
1.3.6.1.4.1.8708.2.19.2.5.1.1.20ColumnoaVoaClientIfInsertionLossread-onlycurrentThe insertion loss for the port. The attenuation can never be set to a value below this value.
1.3.6.1.4.1.8708.2.19.2.5.1.1.21ColumnoaVoaClientIfExpectedFrequencyread-writecurrentThe frequency given in hundreds of GHz (0.01 GHz). This value is only used for presentation purposes in name of port.
1.3.6.1.4.1.8708.2.19.2.5.1.1.22ColumnoaVoaClientIfSfpMissingread-onlycurrentAn expected VOA SFP is missing. A(ctivation): An expected SFP is missing. D(e-activation): The missing SFP is inserted.
1.3.6.1.4.1.8708.2.19.2.5.1.1.23ColumnoaVoaClientIfSfpClassread-onlycurrentString that contains general information about the SFP.
1.3.6.1.4.1.8708.2.19.2.5.1.1.24ColumnoaVoaClientIfSfpTransmitterFailedread-onlycurrentThe SFP has detected a failure in the transmitter part. A(ctivation): The transmitter has failed D(e-activation): The transmitter is OK again
1.3.6.1.4.1.8708.2.19.2.5.1.1.25ColumnoaVoaClientIfSfpMediaMismatchread-onlycurrentThe type of the inserted SFP is not the expected one. A(ctivation): Invalid or mismatching SFP media is detected. D(e-activation): The correct SFP is used.
1.3.6.1.4.1.8708.2.19.2.5.1.1.26ColumnoaVoaClientIfLossOfSignalread-onlycurrentLoss of signal. A(ctivation): Active loss of signal HW indication. D(e-activation): Inactive loss of signal HW indication.
1.3.6.1.4.1.8708.2.19.2.5.1.1.27ColumnoaVoaClientIfSfpCodeMismatchread-onlycurrentThe inserted SFP does not have a legal manufacturer code. A(ctivation): A SFP with illegal code is inserted. D(e-activation): The SFP with illegal code is remo…
1.3.6.1.4.1.8708.2.19.2.5.1.1.28ColumnoaVoaClientIfAttenuationConfigMismatchread-onlycurrentThe wanted attenuation is not supported by the inserted SFP.
1.3.6.1.4.1.8708.2.19.2.6NodeoaVoaLineIfList
1.3.6.1.4.1.8708.2.19.2.6.1TableoaVoaLineIfTablenot-accessiblecurrentThe interface list.
1.3.6.1.4.1.8708.2.19.2.6.1.1RowoaVoaLineIfEntrynot-accessiblecurrentAn entry in the interface list.
1.3.6.1.4.1.8708.2.19.2.6.1.1.1ColumnoaVoaLineIfIndexread-onlycurrentAn arbitrary index assigned to each entry.
1.3.6.1.4.1.8708.2.19.2.6.1.1.2ColumnoaVoaLineIfNameread-onlycurrentThe management name of the interface, for example 'VoaLine:1:2:1-2', where the first number indicates sub-rack, the second slot number and the third is the por…
1.3.6.1.4.1.8708.2.19.2.6.1.1.3ColumnoaVoaLineIfDescrread-writecurrentUser configurable label. This attribute can be written via SNMP.
1.3.6.1.4.1.8708.2.19.2.6.1.1.4ColumnoaVoaLineIfSubrackread-createcurrentThe number of the subrack where the interface is located.
1.3.6.1.4.1.8708.2.19.2.6.1.1.5ColumnoaVoaLineIfSlotread-createcurrentThe number of the slot where the interface is located.
1.3.6.1.4.1.8708.2.19.2.6.1.1.6ColumnoaVoaLineIfTxPortread-createcurrentThe number of the port where the TX-side of the interface is located.
1.3.6.1.4.1.8708.2.19.2.6.1.1.7ColumnoaVoaLineIfRxPortread-createcurrentThe number of the port where the RX-side of the interface is located.
1.3.6.1.4.1.8708.2.19.2.6.1.1.8ColumnoaVoaLineIfInvPhysIndexOrZeroread-onlycurrentThe row in the invPhysTable for this interface. Set to 0 if not known.
1.3.6.1.4.1.8708.2.19.2.6.1.1.9ColumnoaVoaLineIfAdminStatusread-writecurrentThe administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. Intended f…
1.3.6.1.4.1.8708.2.19.2.6.1.1.10ColumnoaVoaLineIfOperStatusread-onlycurrentThe operational state for the interface. notPresent - The interface is not available. down - The interface is not used. up - The interface is active.
1.3.6.1.4.1.8708.2.19.2.6.1.1.11ColumnoaVoaLineIfModuleFailureread-onlycurrentThe module HW has detected a failure. A: The module has failed D: The module is OK again
1.3.6.1.4.1.8708.2.19.2.6.1.1.12ColumnoaVoaLineIfObjectPropertyread-onlycurrentProperty mask.
1.3.6.1.4.1.8708.2.19.2.7NodeoaModuleList
1.3.6.1.4.1.8708.2.19.2.7.1TableoaModuleTablenot-accessiblecurrentThe module list.
1.3.6.1.4.1.8708.2.19.2.7.1.1RowoaModuleEntrynot-accessiblecurrentAn entry in the module list.
1.3.6.1.4.1.8708.2.19.2.7.1.1.1ColumnoaModuleIndexread-onlycurrentAn arbitrary index assigned to each entry.
1.3.6.1.4.1.8708.2.19.2.7.1.1.2ColumnoaModuleNameread-onlycurrentThe management name of the interface, for example 'module:1:2:1'.
1.3.6.1.4.1.8708.2.19.2.7.1.1.3ColumnoaModuleDescrread-writecurrentUser configurable label.
1.3.6.1.4.1.8708.2.19.2.7.1.1.4ColumnoaModuleSubrackread-onlycurrentThe number of the subrack where the module is located.
1.3.6.1.4.1.8708.2.19.2.7.1.1.5ColumnoaModuleSlotread-onlycurrentThe number of the slot where the module is located.
1.3.6.1.4.1.8708.2.19.2.7.1.1.6ColumnoaModuleNumberread-onlycurrentThe number of the module on the board.
1.3.6.1.4.1.8708.2.19.2.7.1.1.7ColumnoaModuleInvPhysIndexOrZeroread-onlycurrentThe row in the invPhysTable for this interface. Set to 0 if not known.
1.3.6.1.4.1.8708.2.19.2.7.1.1.8ColumnoaModuleAdminStatusread-writecurrentThe administrative state for the module. up - Alarms are not suppressed. service - Alarms from the module are suppressed. The module is still activated. down -…
1.3.6.1.4.1.8708.2.19.2.7.1.1.9ColumnoaModuleOperStatusread-onlycurrentThe operational state for the module. notPresent - The module is not available. down - The module is not used. up - The module is active.
1.3.6.1.4.1.8708.2.19.2.7.1.1.10ColumnoaModuleObjectPropertyread-onlycurrentProperty mask.
1.3.6.1.4.1.8708.2.19.2.7.1.1.11ColumnoaModuleNominalTempread-onlycurrentThe set temperature in units of 0.1 degrees centigrade.
1.3.6.1.4.1.8708.2.19.2.7.1.1.12ColumnoaModuleRelativeTempread-onlycurrentThe relative temperature in units of 0.1 degrees centigrade.
1.3.6.1.4.1.8708.2.19.2.7.1.1.13ColumnoaModuleTempFailureread-onlycurrentThe module temperature is above/below expected one. A: The temperature is not correct. D: The temperature becomes correct.
1.3.6.1.4.1.8708.2.19.2.7.1.1.14ColumnoaModuleTemperatureread-onlycurrentThe temperature of the module in 0.1 degrees centigrade
1.3.6.1.4.1.8708.2.19.2.7.1.1.15ColumnoaModuleCommunicationFailureread-onlycurrentThe communication with the module failed. A(ctivation): Failed to talk to the module D(e-activation): Could talk to the module again
1.3.6.1.4.1.8708.2.19.2.7.1.1.16ColumnoaModuleModuleInforead-onlycurrentInformation (for example firmware and serial number) about the module.
1.3.6.1.4.1.8708.2.19.2.7.1.1.17ColumnoaModuleVcomThresholdExceededread-onlydeprecatedThe common voltage supply in the ROADM module has exceeded recommended threshold. Firmware upgrade is recommended to resolve this alarm. A(ctivation): The VCOM…
1.3.6.1.4.1.8708.2.19.2.7.1.1.18ColumnoaModuleFirmwareUpgradeAvailableread-onlycurrentAn upgrade is available for the ROADM module. See release notes for details on how to obtain and install the upgrade
1.3.6.1.4.1.8708.2.19.2.7.1.1.19ColumnoaModuleWarmingUpread-onlycurrentROADM module is warming up, the optics has not reached a stable temperature, all channels are blocked. A(ctivation): cold start of ROADM board D(e-activation):…
1.3.6.1.4.1.8708.2.19.2.7.1.1.20ColumnoaModuleFailureread-onlycurrentThe module HW has detected a failure. A(ctivation): The module has failed D(e-activation): The module is OK again