MIB Viewer

LUM-WDM-MIB

550 objects
The WDM trunk interface and protection group MIB. - General - WDM trunk interfaces - WDM passive interfaces - Protection groups
Imported Objects
LUM-REGlumModules lumWdmMIB
LUM-TC MISSINGAdminStatusWithNA BerLevel BoardOrInterfaceAdminStatus BoardOrInterfaceOperStatus CommandString EnabledDisabledWithNA FaultStatus LambdaFrequency LambdaType MgmtNameString ObjectProperty OperStatusWithNA PortNumber PortType ResetWithNA SignalFormat Signed32WithNA SlotNumber SubrackNumber TruthValueWithNA
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMIGauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCDateAndTime DisplayString RowStatus TestAndIncr
OIDNameAccessStatusDescription
1.3.6.1.4.1.8708.1.1.6IdentitylumWdmMIBModuleThe WDM trunk interface and protection group MIB. - General - WDM trunk interfaces - WDM passive interfaces - Protection groups
1.3.6.1.4.1.8708.2.4.1NodelumWdmConfs
1.3.6.1.4.1.8708.2.4.1.1NodelumWdmGroups
1.3.6.1.4.1.8708.2.4.1.1.1GroupwdmGeneralGroupcurrentThe general objects.
1.3.6.1.4.1.8708.2.4.1.1.2GroupwdmIfGroupdeprecatedThe wdm trunk interface objects.
1.3.6.1.4.1.8708.2.4.1.1.3GroupwdmProtGroupdeprecatedNote: This group is deprecated. The protection group objects.
1.3.6.1.4.1.8708.2.4.1.1.4GroupwdmNotificationGroupdeprecatedThe WDM notifications.
1.3.6.1.4.1.8708.2.4.1.1.5GroupwdmPassiveIfGroupdeprecatedThe passive i/f group objects.
1.3.6.1.4.1.8708.2.4.1.1.6GroupwdmGeneralGroupV2deprecatedThe WDM general objects v2.
1.3.6.1.4.1.8708.2.4.1.1.7GroupwdmIfGroupV2deprecatedThe wdm trunk interface objects V2.
1.3.6.1.4.1.8708.2.4.1.1.8GroupwdmPassiveIfGroupV2deprecatedThe passive i/f group objects V2.
1.3.6.1.4.1.8708.2.4.1.1.9GroupwdmIfGroupV3deprecatedThe wdm trunk interface objects V3.
1.3.6.1.4.1.8708.2.4.1.1.10GroupwdmPassiveIfGroupV3deprecatedThe passive i/f group objects V3.
1.3.6.1.4.1.8708.2.4.1.1.11GroupwdmIfGroupV4deprecatedThe wdm trunk interface objects V4.
1.3.6.1.4.1.8708.2.4.1.1.12GroupwdmPassiveIfGroupV4deprecatedThe passive i/f group objects V4.
1.3.6.1.4.1.8708.2.4.1.1.13GroupwdmIfGroupV5deprecatedThe wdm trunk interface objects V5.
1.3.6.1.4.1.8708.2.4.1.1.14GroupwdmProtGroupV2deprecatedThe protection group objects v2.
1.3.6.1.4.1.8708.2.4.1.1.15GroupwdmIfGroupV6deprecatedThe wdm trunk interface objects V6.
1.3.6.1.4.1.8708.2.4.1.1.16GroupwdmNotificationGroupV2currentThe WDM notifications V2.
1.3.6.1.4.1.8708.2.4.1.1.17GroupwdmIfGroupV7deprecatedThe wdm trunk interface objects V7.
1.3.6.1.4.1.8708.2.4.1.1.18GroupwdmGeneralGroupV3deprecatedThe WDM general objects v3.
1.3.6.1.4.1.8708.2.4.1.1.19GroupwdmIfGroupV8deprecatedThe wdm trunk interface objects V8.
1.3.6.1.4.1.8708.2.4.1.1.20GroupwdmIfGroupV9deprecatedThe wdm trunk interface objects V9.
1.3.6.1.4.1.8708.2.4.1.1.21GroupwdmIfGroupV10deprecatedThe wdm trunk interface objects V10.
1.3.6.1.4.1.8708.2.4.1.1.22GroupwdmIfGroupV11deprecatedThe wdm trunk interface objects V11.
1.3.6.1.4.1.8708.2.4.1.1.23GroupwdmIfGroupV12deprecatedThe wdm trunk interface objects V12. (2.2)
1.3.6.1.4.1.8708.2.4.1.1.24GroupwdmPassiveIfGroupV5deprecatedThe passive i/f group objects V5.
1.3.6.1.4.1.8708.2.4.1.1.25GroupwdmIfGroupV13deprecatedThe wdm trunk interface objects V13. (3.0)
1.3.6.1.4.1.8708.2.4.1.1.26GroupwdmGeneralGroupV4deprecatedThe WDM general objects v4 (3.1).
1.3.6.1.4.1.8708.2.4.1.1.27GroupwdmProtGroupV3deprecatedThe protection group objects v3 (3.1).
1.3.6.1.4.1.8708.2.4.1.1.28GroupwdmIfGroupV14deprecatedThe wdm trunk interface objects V14. (4.0)
1.3.6.1.4.1.8708.2.4.1.1.29GroupwdmPassiveIfGroupV6currentThe passive i/f group objects V6 (4.0).
1.3.6.1.4.1.8708.2.4.1.1.30GroupwdmProtGroupV4deprecatedThe protection group objects v4 (4.0).
1.3.6.1.4.1.8708.2.4.1.1.31GroupwdmProtGroupV5deprecatedThe protection group objects v5 (4.1).
1.3.6.1.4.1.8708.2.4.1.1.32GroupwdmIfGroupV15deprecatedThe wdm trunk interface objects V15. (5.0)
1.3.6.1.4.1.8708.2.4.1.1.33GroupwdmIfGroupV16deprecatedThe wdm trunk interface objects V16. (6.0)
1.3.6.1.4.1.8708.2.4.1.1.34GroupwdmIfGroupV17deprecatedThe wdm trunk interface objects V17. (9.0)
1.3.6.1.4.1.8708.2.4.1.1.35GroupwdmIfGroupV18deprecatedThe wdm trunk interface objects V18. (9.1)
1.3.6.1.4.1.8708.2.4.1.1.36GroupwdmIfGroupV19deprecatedThe wdm trunk interface objects V19. (10.0)
1.3.6.1.4.1.8708.2.4.1.1.38GroupwdmVc4GroupdeprecatedThe vc4 objects (10.0).
1.3.6.1.4.1.8708.2.4.1.1.39GroupwdmGeneralGroupV5currentThe WDM general objects v5 (10.0).
1.3.6.1.4.1.8708.2.4.1.1.40GroupwdmIfGroupV20deprecatedThe wdm trunk interface objects V20. (11.0)
1.3.6.1.4.1.8708.2.4.1.1.41GroupwdmIfGroupV21deprecatedThe wdm trunk interface objects V21. (12.0)
1.3.6.1.4.1.8708.2.4.1.1.42GroupwdmIfGroupV22deprecatedThe wdm trunk interface objects V22. (13.0)
1.3.6.1.4.1.8708.2.4.1.1.43GroupwdmRemoteProtGroupcurrentThe remote protection group objects. (13.0)
1.3.6.1.4.1.8708.2.4.1.1.44GroupwdmProtGroupV6currentThe protection group objects v6 (13.0).
1.3.6.1.4.1.8708.2.4.1.1.45GroupwdmCtrlChannelGroupdeprecatedThe wdm optical control channel objects. (13.0)
1.3.6.1.4.1.8708.2.4.1.1.46GroupwdmCtrlGroupGroupdeprecatedThe wdm optical control group objects. (13.0)
1.3.6.1.4.1.8708.2.4.1.1.48GroupwdmCtrlGroupGroupV2deprecatedThe wdm optical control group objects. (14.0)
1.3.6.1.4.1.8708.2.4.1.1.49GroupwdmSubChannelGroupdeprecatedThe wdm subchannel objects. (15.0)
1.3.6.1.4.1.8708.2.4.1.1.50GroupwdmGeneralGroupV6deprecatedThe WDM general objects v6 (15.0).
1.3.6.1.4.1.8708.2.4.1.1.51GroupwdmIfGroupV23deprecatedThe wdm trunk interface objects V23. (15.0)
1.3.6.1.4.1.8708.2.4.1.1.52GroupwdmVc4GroupV2currentThe vc4 objects (16.0).
1.3.6.1.4.1.8708.2.4.1.1.53GroupwdmCtrlChannelGroupV2deprecatedThe wdm optical control channel objects. (16.0)
1.3.6.1.4.1.8708.2.4.1.1.54GroupwdmCtrlGlobalGroupcurrentThe wdm optical control general objects. (16.0)
1.3.6.1.4.1.8708.2.4.1.1.55GroupwdmSubChannelGroupV2currentThe wdm subchannel objects. (16.0)
1.3.6.1.4.1.8708.2.4.1.1.56GroupwdmProtGroupV7deprecatedThe protection group objects v6 (17.0).
1.3.6.1.4.1.8708.2.4.1.1.57GroupwdmIfGroupV24deprecatedThe wdm trunk interface objects V24. (17.0)
1.3.6.1.4.1.8708.2.4.1.1.58GroupwdmIfGroupV25deprecatedThe wdm trunk interface objects V25. (18.0)
1.3.6.1.4.1.8708.2.4.1.1.59GroupwdmCtrlChannelGroupV3deprecatedThe wdm optical control channel objects. (19.0)
1.3.6.1.4.1.8708.2.4.1.1.60GroupwdmIfGroupV26deprecatedThe wdm trunk interface objects V26. (20.0)
1.3.6.1.4.1.8708.2.4.1.1.61GroupwdmProtGroupV8deprecatedThe protection group objects v8 (20.0).
1.3.6.1.4.1.8708.2.4.1.1.62GroupwdmProtGroupV9currentThe protection group objects v9 (22.0).
1.3.6.1.4.1.8708.2.4.1.1.63GroupwdmCtrlGroupGroupV3deprecatedThe wdm optical control group objects. (23.0)
1.3.6.1.4.1.8708.2.4.1.1.64GroupwdmIfGroupV27deprecatedThe wdm trunk interface objects V27. (23.0)
1.3.6.1.4.1.8708.2.4.1.1.65GroupwdmIfGroupV28deprecatedThe wdm trunk interface objects V28. (23.1)
1.3.6.1.4.1.8708.2.4.1.1.66GroupwdmIfGroupV29deprecatedThe wdm trunk interface objects V29. (25.0)
1.3.6.1.4.1.8708.2.4.1.1.67GroupwdmDelayCompPGGroupcurrentThe wdm delay compensation for PG objects. (27.1)
1.3.6.1.4.1.8708.2.4.1.1.68GroupwdmDelayCompLinkGroupcurrentThe wdm delay compensation for link objects. (27.1)
1.3.6.1.4.1.8708.2.4.1.1.69GroupwdmCtrlChannelGroupV4deprecatedThe wdm optical control channel objects. (28.0)
1.3.6.1.4.1.8708.2.4.1.1.70GroupwdmIfGroupV30deprecatedThe wdm trunk interface objects V30. (28.0)
1.3.6.1.4.1.8708.2.4.1.1.71GroupwdmPassiveIfGroupV7currentThe passive i/f group objects V7 (28.0).
1.3.6.1.4.1.8708.2.4.1.1.72GroupwdmMeanChannelPowerControlGroupV1currentThe wdm mean channel power control loop objects version 1 (27.0)
1.3.6.1.4.1.8708.2.4.1.1.73GroupwdmMeanChannelPowerControlGlobalGroupV1currentThe bogus table used only to create entries in wdmMeanChannelPowerControl v1 (28.0)
1.3.6.1.4.1.8708.2.4.1.1.74GroupwdmGeneralGroupV7currentThe WDM general objects v7 (28.0).
1.3.6.1.4.1.8708.2.4.1.1.75GroupwdmCtrlGroupGroupV4deprecatedThe wdm optical control group objects. (29.0)
1.3.6.1.4.1.8708.2.4.1.1.76GroupwdmCtrlGroupGroupV5currentThe wdm optical control group objects. (R30.0)
1.3.6.1.4.1.8708.2.4.1.1.77GroupwdmCtrlChannelGroupV5currentThe wdm optical control channel objects. (30.0)
1.3.6.1.4.1.8708.2.4.1.1.78GroupwdmIfGroupV31currentThe wdm trunk interface objects V31. (32.1)
1.3.6.1.4.1.8708.2.4.1.2NodelumWdmCompl
1.3.6.1.4.1.8708.2.4.1.2.1CompliancelumWdmBasicComplV1deprecatedBasic implementation requirements for the WDM MIB.
1.3.6.1.4.1.8708.2.4.1.2.2CompliancelumWdmBasicComplV2deprecatedBasic implementation requirements for the WDM MIB V2.
1.3.6.1.4.1.8708.2.4.1.2.3CompliancelumWdmBasicComplV3deprecatedBasic implementation requirements for the WDM MIB V3.
1.3.6.1.4.1.8708.2.4.1.2.4CompliancelumWdmBasicComplV4deprecatedBasic implementation requirements for the WDM MIB V4.
1.3.6.1.4.1.8708.2.4.1.2.5CompliancelumWdmBasicComplV5deprecatedBasic implementation requirements for the WDM MIB V5.
1.3.6.1.4.1.8708.2.4.1.2.6CompliancelumWdmBasicComplV6deprecatedBasic implementation requirements for the WDM MIB V6.
1.3.6.1.4.1.8708.2.4.1.2.7CompliancelumWdmBasicComplV7deprecatedBasic implementation requirements for the WDM MIB V7.
1.3.6.1.4.1.8708.2.4.1.2.8CompliancelumWdmBasicComplV8deprecatedBasic implementation requirements for the WDM MIB V8.
1.3.6.1.4.1.8708.2.4.1.2.9CompliancelumWdmBasicComplV9deprecatedBasic implementation requirements for the WDM MIB V9.
1.3.6.1.4.1.8708.2.4.1.2.10CompliancelumWdmBasicComplV10deprecatedBasic implementation requirements for the WDM MIB V10.
1.3.6.1.4.1.8708.2.4.1.2.11CompliancelumWdmBasicComplV11deprecatedBasic implementation requirements for the WDM MIB V11.
1.3.6.1.4.1.8708.2.4.1.2.12CompliancelumWdmBasicComplV12deprecatedBasic implementation requirements for the WDM MIB V12.
1.3.6.1.4.1.8708.2.4.1.2.13CompliancelumWdmBasicComplV13deprecatedBasic implementation requirements for the WDM MIB V13.
1.3.6.1.4.1.8708.2.4.1.2.14CompliancelumWdmBasicComplV14deprecatedBasic implementation requirements for the WDM MIB V14.
1.3.6.1.4.1.8708.2.4.1.2.15CompliancelumWdmBasicComplV15deprecatedBasic implementation requirements for the WDM MIB V15.
1.3.6.1.4.1.8708.2.4.1.2.16CompliancelumWdmBasicComplV16deprecatedBasic implementation requirements for the WDM MIB V16.
1.3.6.1.4.1.8708.2.4.1.2.17CompliancelumWdmBasicComplV17deprecatedBasic implementation requirements for the WDM MIB V17. (2.2)
1.3.6.1.4.1.8708.2.4.1.2.18CompliancelumWdmBasicComplV18deprecatedBasic implementation requirements for the WDM MIB V18. (3.0)
1.3.6.1.4.1.8708.2.4.1.2.19CompliancelumWdmBasicComplV19deprecatedBasic implementation requirements for the WDM MIB V19. (3.1)
1.3.6.1.4.1.8708.2.4.1.2.20CompliancelumWdmBasicComplV20deprecatedBasic implementation requirements for the WDM MIB V20. (4.0)
1.3.6.1.4.1.8708.2.4.1.2.21CompliancelumWdmBasicComplV21deprecatedBasic implementation requirements for the WDM MIB V21. (4.1)
1.3.6.1.4.1.8708.2.4.1.2.22CompliancelumWdmBasicComplV22deprecatedBasic implementation requirements for the WDM MIB V22. (5.0)
1.3.6.1.4.1.8708.2.4.1.2.23CompliancelumWdmBasicComplV23deprecatedBasic implementation requirements for the WDM MIB V23. (6.0)
1.3.6.1.4.1.8708.2.4.1.2.24CompliancelumWdmBasicComplV24deprecatedBasic implementation requirements for the WDM MIB V24. (8.0)
1.3.6.1.4.1.8708.2.4.1.2.25CompliancelumWdmBasicComplV25deprecatedBasic implementation requirements for the WDM MIB V25. (9.0)
1.3.6.1.4.1.8708.2.4.1.2.26CompliancelumWdmBasicComplV26deprecatedBasic implementation requirements for the WDM MIB V26. (9.1)
1.3.6.1.4.1.8708.2.4.1.2.27CompliancelumWdmBasicComplV27deprecatedBasic implementation requirements for the WDM MIB V27. (10.0)
1.3.6.1.4.1.8708.2.4.1.2.28CompliancelumWdmBasicComplV28deprecatedBasic implementation requirements for the WDM MIB V28. (11.0)
1.3.6.1.4.1.8708.2.4.1.2.29CompliancelumWdmBasicComplV29deprecatedBasic implementation requirements for the WDM MIB V29. (12.0)
1.3.6.1.4.1.8708.2.4.1.2.30CompliancelumWdmBasicComplV30deprecatedBasic implementation requirements for the WDM MIB V30. (13.0)
1.3.6.1.4.1.8708.2.4.1.2.31CompliancelumWdmBasicComplV31deprecatedBasic implementation requirements for the WDM MIB V31. (14.0)
1.3.6.1.4.1.8708.2.4.1.2.32CompliancelumWdmBasicComplV32deprecatedBasic implementation requirements for the WDM MIB V32. (15.0)
1.3.6.1.4.1.8708.2.4.1.2.33CompliancelumWdmBasicComplV33deprecatedBasic implementation requirements for the WDM MIB V33. (16.0)
1.3.6.1.4.1.8708.2.4.1.2.34CompliancelumWdmBasicComplV34deprecatedBasic implementation requirements for the WDM MIB V34. (17.0)
1.3.6.1.4.1.8708.2.4.1.2.35CompliancelumWdmBasicComplV35deprecatedBasic implementation requirements for the WDM MIB V35. (18.0)
1.3.6.1.4.1.8708.2.4.1.2.36CompliancelumWdmBasicComplV36deprecatedBasic implementation requirements for the WDM MIB V36. (19.0)
1.3.6.1.4.1.8708.2.4.1.2.37CompliancelumWdmBasicComplV37deprecatedBasic implementation requirements for the WDM MIB V37. (20.0)
1.3.6.1.4.1.8708.2.4.1.2.38CompliancelumWdmBasicComplV38deprecatedBasic implementation requirements for the WDM MIB V38. (22.0)
1.3.6.1.4.1.8708.2.4.1.2.39CompliancelumWdmBasicComplV39deprecatedBasic implementation requirements for the WDM MIB V38. (22.0)
1.3.6.1.4.1.8708.2.4.1.2.40CompliancelumWdmBasicComplV40deprecatedBasic implementation requirements for the WDM MIB V40. (23.1)
1.3.6.1.4.1.8708.2.4.1.2.41CompliancelumWdmBasicComplV41deprecatedBasic implementation requirements for the WDM MIB V41. (25.0)
1.3.6.1.4.1.8708.2.4.1.2.42CompliancelumWdmBasicComplV42deprecatedBasic implementation requirements for the WDM MIB V42. (27.1)
1.3.6.1.4.1.8708.2.4.1.2.43CompliancelumWdmBasicComplV43deprecatedBasic implementation requirements for the WDM MIB V43. (28.0)
1.3.6.1.4.1.8708.2.4.1.2.44CompliancelumWdmBasicComplV44deprecatedBasic implementation requirements for the WDM MIB V44. (29.0)
1.3.6.1.4.1.8708.2.4.1.2.45CompliancelumWdmBasicComplV45deprecatedBasic implementation requirements for the WDM MIB V45. (30.0)
1.3.6.1.4.1.8708.2.4.1.2.46CompliancelumWdmBasicComplV46deprecatedBasic implementation requirements for the WDM MIB V46. (30.1)
1.3.6.1.4.1.8708.2.4.1.2.47CompliancelumWdmBasicComplV47currentBasic implementation requirements for the WDM MIB V47. (32.1)
1.3.6.1.4.1.8708.2.4.1.3NodelumWdmMinimalGroups
1.3.6.1.4.1.8708.2.4.1.3.1GroupwdmGeneralMinimalGroupV1currentThe minimal general wdm objects.
1.3.6.1.4.1.8708.2.4.1.3.2GroupwdmIfMinimalGroupV1deprecatedThe wdm trunk interface minimal objects.
1.3.6.1.4.1.8708.2.4.1.3.3GroupwdmPassiveIfMinimalGroupV1deprecatedThe passive i/f group minimal objects.
1.3.6.1.4.1.8708.2.4.1.3.4GroupwdmIfMinimalGroupV2currentThe wdm trunk interface minimal objects.
1.3.6.1.4.1.8708.2.4.1.3.5GroupwdmPassiveIfMinimalGroupV2currentThe passive i/f group minimal objects.
1.3.6.1.4.1.8708.2.4.1.4NodelumWdmMinimalCompl
1.3.6.1.4.1.8708.2.4.1.4.1CompliancelumWdmMinimalComplV1deprecatedMinimal implementation requirements for the wdm MIB v1.
1.3.6.1.4.1.8708.2.4.1.4.2CompliancelumWdmMinimalComplV2deprecatedMinimal implementation requirements for the wdm MIB v2.
1.3.6.1.4.1.8708.2.4.1.4.3CompliancelumWdmMinimalComplV3deprecatedMinimal implementation requirements for the wdm MIB v3 (30.1).
1.3.6.1.4.1.8708.2.4.1.4.4CompliancelumWdmMinimalComplV4currentMinimal implementation requirements for the wdm MIB v4 (31.1).
1.3.6.1.4.1.8708.2.4.2NodelumWdmMIBObjects
1.3.6.1.4.1.8708.2.4.2.1NodewdmGeneral
1.3.6.1.4.1.8708.2.4.2.1.1ScalarwdmGeneralTestAndIncrread-writecurrentProtection against simultaneous access from multiple managers. See SNMPv2-TC.
1.3.6.1.4.1.8708.2.4.2.1.2ScalarwdmGeneralMibSpecVersionread-writecurrentThe MIB specification version. tbd: persistent?
1.3.6.1.4.1.8708.2.4.2.1.3ScalarwdmGeneralMibImplVersionread-writecurrentThe MIB implementation version. tbd: persistent?
1.3.6.1.4.1.8708.2.4.2.1.4ScalarwdmGeneralLastChangeTimeread-onlycurrentThe time when the configuration of the MIB was last changed.
1.3.6.1.4.1.8708.2.4.2.1.5ScalarwdmGeneralStateLastChangeTimeread-onlycurrentThe time when the state of the MIB was last changed.
1.3.6.1.4.1.8708.2.4.2.1.6ScalarwdmGeneralWdmIfTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.4.2.1.7ScalarwdmGeneralWdmPassiveIfTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.4.2.1.8ScalarwdmGeneralWdmProtTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.4.2.1.9ScalarwdmGeneralWdmVc4TableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.4.2.1.10ScalarwdmGeneralWdmRemoteProtTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.4.2.1.11ScalarwdmGeneralWdmCtrlChannelTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.4.2.1.12ScalarwdmGeneralWdmCtrlGroupTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.4.2.1.13ScalarwdmGeneralWdmSubChannelTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.4.2.1.14ScalarwdmGeneralWdmDelayCompPGTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.4.2.1.15ScalarwdmGeneralWdmDelayCompLinkTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.4.2.1.16ScalarwdmGeneralWdmMeanChannelPowerControlTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.4.2.1.17ScalarwdmGeneralWdmMeanChannelPowerControlGlobalTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.4.2.2NodewdmIfList
1.3.6.1.4.1.8708.2.4.2.2.1TablewdmIfTablenot-accessiblecurrentThe interface list.
1.3.6.1.4.1.8708.2.4.2.2.1.1RowwdmIfEntrynot-accessiblecurrentAn entry in the interface list.
1.3.6.1.4.1.8708.2.4.2.2.1.1.1ColumnwdmIfIndexread-onlycurrentAn arbitrary index assigned to each if entry.
1.3.6.1.4.1.8708.2.4.2.2.1.1.2ColumnwdmIfNameread-onlycurrentThe management name of the interface, for example 'wdm:1:2:1'.
1.3.6.1.4.1.8708.2.4.2.2.1.1.3ColumnwdmIfDescrread-writecurrentUser configurable label.
1.3.6.1.4.1.8708.2.4.2.2.1.1.4ColumnwdmIfSubrackread-onlycurrentThe number of the subrack where the interface is located.
1.3.6.1.4.1.8708.2.4.2.2.1.1.5ColumnwdmIfSlotread-onlycurrentThe number of the slot where the interface is located.
1.3.6.1.4.1.8708.2.4.2.2.1.1.6ColumnwdmIfTxPortread-onlycurrentThe number of the port where the interface is located.
1.3.6.1.4.1.8708.2.4.2.2.1.1.7ColumnwdmIfInvPhysIndexOrZeroread-onlycurrentThe row in the invPhysTable for this interface. Set to 0 if not known.
1.3.6.1.4.1.8708.2.4.2.2.1.1.8ColumnwdmIfTxLambdaread-onlycurrentThe transmitted frequency given in hundreds of GHz (0.01 GHz).
1.3.6.1.4.1.8708.2.4.2.2.1.1.9ColumnwdmIfHighSpeedMinread-onlycurrentThe minimum speed in units of 1,000,000 bits per second. If this object reports a value of 'n' then the speed of the interface is somewhere in the range of 'n-…
1.3.6.1.4.1.8708.2.4.2.2.1.1.10ColumnwdmIfHighSpeedMaxread-onlycurrentThe maximum speed in units of 1,000,000 bits per second. If this object reports a value of 'n' then the speed of the interface is somewhere in the range of 'n-…
1.3.6.1.4.1.8708.2.4.2.2.1.1.11ColumnwdmIfPowerLevelread-onlycurrentThe received power level in units of 0.1 dBm.
1.3.6.1.4.1.8708.2.4.2.2.1.1.12ColumnwdmIfPowerLevelHighThresholdread-writecurrentThe upper threshold for received power level in units of 0.1 dBm. Note: Depending on the type of board and interface the value range may vary.
1.3.6.1.4.1.8708.2.4.2.2.1.1.13ColumnwdmIfPowerLevelLowThresholdread-writecurrentThe lower threshold for received power level in units of 0.1 dBm. Note: Depending on the type of board and interface the value range may vary.
1.3.6.1.4.1.8708.2.4.2.2.1.1.14ColumnwdmIfLaserTempread-onlycurrentThe pre-set laser temperature in units of 0.1 degrees centigrade.
1.3.6.1.4.1.8708.2.4.2.2.1.1.15ColumnwdmIfLaserTempOffsetread-onlycurrentThe current offset from the pre-set temperature in units of 0.1 degrees centigrade.
1.3.6.1.4.1.8708.2.4.2.2.1.1.16ColumnwdmIfLaserTempOffsetThresholdread-writecurrentThe absolute value of the offset for the LTL and LTH alarms in units of 0.1 degrees centigrade.
1.3.6.1.4.1.8708.2.4.2.2.1.1.17ColumnwdmIfLaserModeread-writecurrentThe administrative state of the TX-side laser. on - The laser is turned on. als - Automatic Laser Shutdown/Turn-Off when lossOfSignal is detected on the RX sid…
1.3.6.1.4.1.8708.2.4.2.2.1.1.18ColumnwdmIfLaserStatusread-onlycurrentThe operational state of the TX-side laser. off - The laser is turned off. on - The laser is turned on.
1.3.6.1.4.1.8708.2.4.2.2.1.1.19ColumnwdmIfAdminStatusread-writecurrentThe administrative state for the interface. down - The interface is de-activated. service - The interface is activated but alarms are suppressed. Intended for …
1.3.6.1.4.1.8708.2.4.2.2.1.1.20ColumnwdmIfOperStatusread-onlycurrentThe operational state for the interface. notPresent - The interface is not available. down - The interface is de-activated or there are faults preventing its t…
1.3.6.1.4.1.8708.2.4.2.2.1.1.21ColumnwdmIfLossOfSignalread-onlycurrentLoss of signal. Applicable for all signal formats. A(ctivation): Active loss of signal HW indication. D(e-activation): Inactive loss of signal HW indication.
1.3.6.1.4.1.8708.2.4.2.2.1.1.22ColumnwdmIfReceivedPowerHighread-onlycurrentReceived power level is too high. Applicable for all signal formats. A: The received power level exceeds the the built-in overload threshold. D: The received p…
1.3.6.1.4.1.8708.2.4.2.2.1.1.23ColumnwdmIfReceivedPowerLowread-onlycurrentReceived power level low threshold exceeded. Applicable for all signal formats. A: The received power level is below the associated threshold. D: The received …
1.3.6.1.4.1.8708.2.4.2.2.1.1.24ColumnwdmIfLaserBiasHighread-onlycurrentLaser bias high threshold exceeded. A: The laser bias current exceeds the associated threshold. D: The laser bias current is 0.5 mA below the associated thresh…
1.3.6.1.4.1.8708.2.4.2.2.1.1.25ColumnwdmIfErroredSecondsread-onlydeprecatedNote: This attribute is deprecated! Errored seconds (ES) threshold exceeded. A: The number of errored seconds during a period exceeds the associated threshold.…
1.3.6.1.4.1.8708.2.4.2.2.1.1.26ColumnwdmIfSeverelyErroredSecondsread-onlydeprecatedNote: This attribute is deprecated! Severely errored seconds (SES) threshold exceeded. A: The number of severely errored seconds during a period exceeds the as…
1.3.6.1.4.1.8708.2.4.2.2.1.1.27ColumnwdmIfBackgroundBlockErrorsread-onlydeprecatedNote: This attribute is deprecated! Background block errors (BBE) threshold exceeded. A: The number of errors during a period exceeds the associated threshold.…
1.3.6.1.4.1.8708.2.4.2.2.1.1.28ColumnwdmIfUnavailableSecondsread-onlydeprecatedNote: This attribute is deprecated! Unavailable seconds (UAS) threshold exceeded. A: The number of unavailable seconds during a period exceeds the associated t…
1.3.6.1.4.1.8708.2.4.2.2.1.1.29ColumnwdmIfForwardDefectIndicationread-onlycurrentForward defect indication. Applicable for all signal formats; detected at WDM level. This alarm suppresses the corresponding SDH/Sonet alarm. A: Forward defect…
1.3.6.1.4.1.8708.2.4.2.2.1.1.30ColumnwdmIfBackwardDefectIndicationread-onlycurrentBackward defect indication. Applicable for all signal formats; detected at WDM level. This alarm suppresses the corresponding SDH/Sonet alarm. A: Backward defe…
1.3.6.1.4.1.8708.2.4.2.2.1.1.31ColumnwdmIfLossOfFrameread-onlycurrentLoss of frame. Applicable for SDH/Sonet signal formats. A: SDH frame can not be located. D: SDH frame is located.
1.3.6.1.4.1.8708.2.4.2.2.1.1.32ColumnwdmIfAlarmIndicationSignalread-onlycurrentAlarm indication signal. Applicable for SDH/Sonet signal formats. For other proprietary formats, e.g. for the tpDDGbE line signal, a similar functionality is e…
1.3.6.1.4.1.8708.2.4.2.2.1.1.33ColumnwdmIfRemoteDefectIndicationread-onlycurrentRemote defect indication. Applicable for SDH/Sonet signal formats. A: RDI indication (in SDH/Sonet frame) active. D: RDI indication inactive.
1.3.6.1.4.1.8708.2.4.2.2.1.1.34ColumnwdmIfLossOfSyncread-onlycurrentLoss of sync (GbE). Applicable for GbE signal formats. A: GbE 'frame' can not be located. D: GbE 'frame' is located.
1.3.6.1.4.1.8708.2.4.2.2.1.1.35ColumnwdmIfLossOfForwardingErrorCorrectionread-onlycurrentLoss of forwarding error correction (FEC). Applicable for all signal formats. A: The interface is unable to perform forwarding error correction. D: The interfa…
1.3.6.1.4.1.8708.2.4.2.2.1.1.36ColumnwdmIfLaserTempHighread-onlycurrentLaser temperature high threshold exceeded. A: The temperature exceeds the associated threshold. D: Temperature is 0.5 degrees centigrade below the associated t…
1.3.6.1.4.1.8708.2.4.2.2.1.1.37ColumnwdmIfLaserTempLowread-onlycurrentLaser temperatur low threshold exceeded. The temperature exceeds the associated threshold. A: The temperature exceeds the associated threshold. D: Temperature …
1.3.6.1.4.1.8708.2.4.2.2.1.1.38ColumnwdmIfRxPortread-onlycurrentThe number of the port where the interface is located.
1.3.6.1.4.1.8708.2.4.2.2.1.1.39ColumnwdmIfBitrateMismatchread-onlycurrentBitrate mismatch (Other). Applicable for other signal formats. A: The interface is unable to lock to the inserted signal. D: The interface is able to lock to t…
1.3.6.1.4.1.8708.2.4.2.2.1.1.40ColumnwdmIfLaserBiasread-onlycurrentMeasures laser bias current value in tenths of mA (0.1 mA).
1.3.6.1.4.1.8708.2.4.2.2.1.1.41ColumnwdmIfLaserBiasThresholdread-writecurrentSets the threshold for the laser bias alarm. in percentage relative to the value set during production. The preset value is 100%.
1.3.6.1.4.1.8708.2.4.2.2.1.1.42ColumnwdmIfLossOfSignalThresholdread-writecurrentThe upper threshold received power level in units of 0.1 dBm. Note: Depending on the type of board and interface the value range may vary.
1.3.6.1.4.1.8708.2.4.2.2.1.1.44ColumnwdmIfJ0PathTraceread-onlydeprecatedThe received J0 path trace string. Applicable for SDH/Sonet signal formats.
1.3.6.1.4.1.8708.2.4.2.2.1.1.45ColumnwdmIfInbandModeread-writedeprecatedThe administrative state the in-band management channel of the WDM interface. down - The management channel is disabled. up - The management channel is in use.
1.3.6.1.4.1.8708.2.4.2.2.1.1.46ColumnwdmIfInbandStatusread-onlydeprecatedThe operational state the in-band management channel of the WDM interface. down - The management channel is disabled. up - The management channel is in use.
1.3.6.1.4.1.8708.2.4.2.2.1.1.47ColumnwdmIfExpectedTxLambdaread-writecurrentThe expected frequency or wavelength. ch871 means the frequency 187.1 THz. w1310 means the wavelength 1310 nm. The semantic of this attribute is different depe…
1.3.6.1.4.1.8708.2.4.2.2.1.1.48ColumnwdmIfForwardingErrorCorrectionModeread-writecurrentThe administrative state of the forwarding error correction function. disabled - FEC is disabled. enabled - FEC is activated. auto - autonegotiation is used to…
1.3.6.1.4.1.8708.2.4.2.2.1.1.49ColumnwdmIfUnexpectedTxLambdaread-onlycurrentThe actual frequency does not match the pre-configured frequency. A pre-configured frequency of '0' matches all actual frequencies. A: The configured frequency…
1.3.6.1.4.1.8708.2.4.2.2.1.1.50ColumnwdmIfTraceIntrusionModeread-writecurrentIndicates whether the trace identifier should be inserted in the transmitted signal. disabled - The trace identifier is taken from the received signal if possi…
1.3.6.1.4.1.8708.2.4.2.2.1.1.51ColumnwdmIfTraceTransmittedread-writecurrentThe trace identifier to be transmitted from this interface. The identifier length is by default 0 to 15. For mxp8iiSonet boards the length is 0 to 62. Set to e…
1.3.6.1.4.1.8708.2.4.2.2.1.1.52ColumnwdmIfTraceReceivedread-onlycurrentThe received trace identifier for this interface.
1.3.6.1.4.1.8708.2.4.2.2.1.1.53ColumnwdmIfTraceExpectedread-writecurrentTrace identifier used for matching against the received trace identifier. The identifier length is by default 0 to 15. For mxp8iiSonet boards the length is 0 t…
1.3.6.1.4.1.8708.2.4.2.2.1.1.54ColumnwdmIfTraceAlarmModeread-writecurrentControls if the trace identifier mismatch alarm should be raised. disabled - The alarm is disabled. enabled - The alarm is raised if expected trace identifier …
1.3.6.1.4.1.8708.2.4.2.2.1.1.55ColumnwdmIfTraceMismatchread-onlycurrentIndicates if the expected trace identifier differs from the received trace identifier. A: The received trace identifier differs from the expected trace identif…
1.3.6.1.4.1.8708.2.4.2.2.1.1.56ColumnwdmIfLaserStatusLastChangeTimeread-onlycurrentThe time when the laser status was last changed.
1.3.6.1.4.1.8708.2.4.2.2.1.1.57ColumnwdmIfSuppressRemoteAlarmsread-writecurrentSuppress AIS, FDI and RDI in the alarm list. The fault status on the port object can, however, be seen. disabled - alarms are not suppressed. enabled - alarms …
1.3.6.1.4.1.8708.2.4.2.2.1.1.58ColumnwdmIfSerialNumberMismatchread-onlycurrentWrong HW unit installed. The link has not been optimized for this individual, wrong serial number. Action: The installation optimization procedure must be run …
1.3.6.1.4.1.8708.2.4.2.2.1.1.59ColumnwdmIfOptimizeDecisionThresholdread-onlycurrentOptimize the threshold for distinguishing between 1s and 0s. This attribute is of 'action type' - it will always have the value 'normal' normal - just a placeh…
1.3.6.1.4.1.8708.2.4.2.2.1.1.60ColumnwdmIfThresholdOptimizationStateread-onlycurrentState of the optimization procedure normal - no operation has been started started - the operation is started searchingFirstLow - Search for the first value of…
1.3.6.1.4.1.8708.2.4.2.2.1.1.61ColumnwdmIfUseHwDefaultDecisionThresholdread-writecurrentUse the HW default decision threshold. This attribute is of 'action type' - it will always have the value 'normal' normal - just a placeholder, is never set by…
1.3.6.1.4.1.8708.2.4.2.2.1.1.62ColumnwdmIfFecCorrectedZerosread-onlycurrentThe number of corrected zeros.
1.3.6.1.4.1.8708.2.4.2.2.1.1.63ColumnwdmIfFecCorrectedOnesread-onlycurrentThe number of corrected ones.
1.3.6.1.4.1.8708.2.4.2.2.1.1.64ColumnwdmIfOptimizedForSerialNumberread-createcurrentThis field contains the serial number of the transponder unit, for which the decision threshold is optimized and stored.
1.3.6.1.4.1.8708.2.4.2.2.1.1.65ColumnwdmIfRelativeDecisionThresholdread-createcurrentThe 1/0 decision threshold computed at installation. The threshold is automatically optimized if the 'Continous optimization' functionality is enabled. Press t…
1.3.6.1.4.1.8708.2.4.2.2.1.1.66ColumnwdmIfTrxCodeMismatchread-onlycurrentThe inserted transceiver does not have a legal manufacturer code. A: A transceiver with illegal code is inserted. D: The transceiver with illegal code is remov…
1.3.6.1.4.1.8708.2.4.2.2.1.1.67ColumnwdmIfTrxBitrateUnavailableread-onlycurrentThe inserted transceiver does not support the requested bit rate. A: A transceiver with other supported bit rate than the requested bit rate is inserted. D: Th…
1.3.6.1.4.1.8708.2.4.2.2.1.1.68ColumnwdmIfTrxMissingread-onlycurrentAn expected transceiver is missing. A: An expected transceiver is missing. D: The missing transceiver is inserted.
1.3.6.1.4.1.8708.2.4.2.2.1.1.69ColumnwdmIfTrxClassread-onlycurrentString that describes the transceiver class.
1.3.6.1.4.1.8708.2.4.2.2.1.1.70ColumnwdmIfLaserTempHighRelativeThresholdread-writecurrentThreshold for the Laser Temp High alarm, expressed as an offset from a pre-set nominal temperature, in units of 0.1 degrees centigrade.
1.3.6.1.4.1.8708.2.4.2.2.1.1.71ColumnwdmIfLaserTempLowRelativeThresholdread-writecurrentThreshold for the Laser Temp Low alarm, expressed as an offset from a pre-set nominal temperature, in units of 0.1 degrees centigrade.
1.3.6.1.4.1.8708.2.4.2.2.1.1.72ColumnwdmIfTransmitterFailedread-onlycurrentThe transceiver HW has detected a failure in the transmitter part. A: The transmitter has failed D: The transmitter is OK again
1.3.6.1.4.1.8708.2.4.2.2.1.1.73ColumnwdmIfReceiverSensitivityread-onlycurrentThe lowest power that the receiver is guaranteed to handle, in units of 0.1 dBm.
1.3.6.1.4.1.8708.2.4.2.2.1.1.74ColumnwdmIfPowerLevelLowRelativeThresholdread-writecurrentThe lower threshold for received power level in units of 0.1 dB, relative to the receiver sensitivity, or loss of signal threshold. - For fixed transceivers it…
1.3.6.1.4.1.8708.2.4.2.2.1.1.75ColumnwdmIfIllegalFrequencyread-onlycurrentThe frequency supported by the transceiver is not recognized by the system. A: Invalid or unknown frequency information is detected in the (pluggable) transcei…
1.3.6.1.4.1.8708.2.4.2.2.1.1.76ColumnwdmIfLaserForcedOnread-writecurrentWhen enabled, the laser is on regardless of whether there is a client signal or not. disabled - the laser is only on when there is a client signal. enabled - t…
1.3.6.1.4.1.8708.2.4.2.2.1.1.77ColumnwdmIfTrafficCombinationread-createcurrentSpecifies how different traffic formats can be combined on different ports on gxp2500, gxp2500Sfp, fhmxp10g, msMxp10G and msMxp. All combinations can not be us…
1.3.6.1.4.1.8708.2.4.2.2.1.1.78ColumnwdmIfSelectTrafficCombinationread-onlycurrentSelect the traffic combination of the board.
1.3.6.1.4.1.8708.2.4.2.2.1.1.79ColumnwdmIfObjectPropertyread-onlycurrentProperty mask.
1.3.6.1.4.1.8708.2.4.2.2.1.1.80ColumnwdmIfTxPowerLevelread-onlycurrentThe transmitted power level in units of 0.1 dBm.
1.3.6.1.4.1.8708.2.4.2.2.1.1.81ColumnwdmIfLaserTempActualread-onlycurrentThe actual laser temperature in units of 0.1 degrees centigrade.
1.3.6.1.4.1.8708.2.4.2.2.1.1.82ColumnwdmIfTrxFailedread-onlycurrentA transceiver hardware failure is detected. A: The transceiver fails. D: The transceiver is replaced.
1.3.6.1.4.1.8708.2.4.2.2.1.1.83ColumnwdmIfDisabledread-onlycurrentThe interface is disabled. A: Interface disabled. D: Interface enabled.
1.3.6.1.4.1.8708.2.4.2.2.1.1.84ColumnwdmIfLoopbackread-onlycurrentThe interface is set in loopback mode. A: Loopback enabled. D: Loopback disabled.
1.3.6.1.4.1.8708.2.4.2.2.1.1.85ColumnwdmIfContinousOptimizationread-writecurrentContinuously run the optimization of the decision threshold. enabled - continous optimization enabled. disabled - continous optimization disabled.
1.3.6.1.4.1.8708.2.4.2.2.1.1.86ColumnwdmIfThresholdOptimizationResultCauseread-onlycurrentThis text descibes the cause why the latest optimize command failed. The information is only valid if the thresholdOptimizationState is finishedFailed.
1.3.6.1.4.1.8708.2.4.2.2.1.1.87ColumnwdmIfDistributionRoleread-createcurrentNote: This attribute is deprecated! The distribution role of the line function - terminal: normal point-to-point operation - broadcastHub: broadcast on both li…
1.3.6.1.4.1.8708.2.4.2.2.1.1.88ColumnwdmIfConfigurationCommandread-onlycurrentNote: This attribute is deprecated! Select the operation mode of the line. - terminal: normal point-to-point operation - broadcastHub: broadcast on both lines.…
1.3.6.1.4.1.8708.2.4.2.2.1.1.89ColumnwdmIfNoFrequencySetread-onlycurrentThe tunable laser frequency has not been set. A: Tunable laser frequency is not set. D: Tunable laser frequency is set.
1.3.6.1.4.1.8708.2.4.2.2.1.1.90ColumnwdmIfFormatread-createcurrentThe signal format FecLan10GbE1A: iWDM 10G framing format type 1A (TPD10GBE-BU, GBE9/MXP10GFEC) FecLan10GbE1B: iWDM 10G framing format type 1B (TPQ10GFEC, MS-MX…
1.3.6.1.4.1.8708.2.4.2.2.1.1.91ColumnwdmIfConfigurationFormatCommandread-onlycurrentCommand to change the signal format. OTU-2 can be selected.
1.3.6.1.4.1.8708.2.4.2.2.1.1.92ColumnwdmIfOHTransparencyread-writedeprecatedNote: This attribute is deprecated! The 'OH Transparency' setting shall be set to 'off' for standard SDH/SONET mode. Does not work when client wrapper is enabl…
1.3.6.1.4.1.8708.2.4.2.2.1.1.93ColumnwdmIfLinkDownread-onlydeprecatedNote: This attribute is deprecated! A: Failure to negotiate a connection with the other party. D: A connection is negotiated.
1.3.6.1.4.1.8708.2.4.2.2.1.1.94ColumnwdmIfAutoNegotiationModeread-writedeprecatedNote: This attribute is deprecated! The wanted auto negotiation mode. off - auto negotiation process is disabled on - auto negotiation process is enabled
1.3.6.1.4.1.8708.2.4.2.2.1.1.95ColumnwdmIfAutoNegotiationStatusread-onlydeprecatedNote: This attribute is deprecated! The result of the auto negotiation procedure incomplete - the result is still pending half - half duplex full - full duplex
1.3.6.1.4.1.8708.2.4.2.2.1.1.96ColumnwdmIfFlowControlModeread-writedeprecatedNote: This attribute is deprecated! The mode for handling of pause messages between the peers. noPause - PAUSE frame reception and transmission is disabled rxP…
1.3.6.1.4.1.8708.2.4.2.2.1.1.97ColumnwdmIfGroupLineModeread-onlycurrentIndicates whether the interface is grouped into a ROADM-Line-group. disabled - The interface is not grouped into a ROADM-Line-group. enabled - The interface is…
1.3.6.1.4.1.8708.2.4.2.2.1.1.98ColumnwdmIfFecTyperead-writecurrentSet type of FEC. enhancedFec - 2nd generation Enhanced FEC (rate compatible with G.709 but > 2 dB additional coding gain) g709 - 1st generation FEC according t…
1.3.6.1.4.1.8708.2.4.2.2.1.1.99ColumnwdmIfFarEndLoopbackread-writecurrentLoop the wdm RX signal back to the wdm TX. This is also called Facility loopback. disabled - the signal is not looped enabled - the signal is looped.
1.3.6.1.4.1.8708.2.4.2.2.1.1.100ColumnwdmIfFarEndLoopbackTimeoutread-createcurrentTimeout for far end loopback (a.k.a. facility loopback) to make sure connection to node is not lost if ppp link is broken. The unit is hour. 0.1 means 6 minute…
1.3.6.1.4.1.8708.2.4.2.2.1.1.101ColumnwdmIfFarEndLoopbackEnabledread-onlycurrentFar end loopback (a.k.a. facility loopback) is enabled.
1.3.6.1.4.1.8708.2.4.2.2.1.1.102ColumnwdmIfChangeLoopbackCommandread-onlycurrentCommand to change Loopback and loopbacktimeout
1.3.6.1.4.1.8708.2.4.2.2.1.1.103ColumnwdmIfFecFailureread-onlycurrentToo many errors to get valid FEC statistics. It is not possible to run control loops based on FEC statistics. A: Too many errors to get valid FEC statistics. D…
1.3.6.1.4.1.8708.2.4.2.2.1.1.104ColumnwdmIfTxSignalStatusread-onlycurrentThe operational state for outgoing (TX) signal of the interface. down - A fault that would lead to a protection switch has occurred. degraded - The signal qual…
1.3.6.1.4.1.8708.2.4.2.2.1.1.105ColumnwdmIfRxSignalStatusread-onlycurrentThe operational state for incoming (RX) signal of the interface. down - A major fault has occurred degraded - The signal quality is impaired. up - The signal i…
1.3.6.1.4.1.8708.2.4.2.2.1.1.106ColumnwdmIfNearEndLoopbackread-writecurrentLoop the wdm TX signal back to the wdm RX. This is also called Terminal loopback. disabled - the signal is not looped enabled - the signal is looped.
1.3.6.1.4.1.8708.2.4.2.2.1.1.107ColumnwdmIfNearEndLoopbackTimeoutread-createcurrentTimeout for near end loopback (a.k.a. terminal loopback) to make sure connection to node is not lost if ppp link is broken. The unit is hours. 0.1 means 6 minu…
1.3.6.1.4.1.8708.2.4.2.2.1.1.108ColumnwdmIfNearEndLoopbackEnabledread-onlycurrentNear end loopback (a.k.a. terminal loopback) is enabled.
1.3.6.1.4.1.8708.2.4.2.2.1.1.109ColumnwdmIfChangeNearEndLoopbackCommandread-onlycurrentCommand to change near end loopback (a.k.a. terminal loopback) and loopbacktimeout
1.3.6.1.4.1.8708.2.4.2.2.1.1.110ColumnwdmIfSignalDegradedread-onlycurrentToo many error corrected. If more errors are corrected it might effect the client signal in a negative way.
1.3.6.1.4.1.8708.2.4.2.2.1.1.111ColumnwdmIfHubProtectionModeread-writecurrentChoose if the line should be used in hub protection. (needs to be setup in mba) disabled - Port is not in hub protection (default) enabled - Hub protection is …
1.3.6.1.4.1.8708.2.4.2.2.1.1.112ColumnwdmIfActualFormatread-onlycurrentThe actual signal format.
1.3.6.1.4.1.8708.2.4.2.2.1.1.113ColumnwdmIfTdcDispersionread-createcurrentShows current dispersion value in the unit.
1.3.6.1.4.1.8708.2.4.2.2.1.1.114ColumnwdmIfTdcDispersionCommandread-onlycurrentSets state and dispersion in the unit.
1.3.6.1.4.1.8708.2.4.2.2.1.1.115ColumnwdmIfTdcDispersionModeread-createcurrentStates the current mode of the TDC dispersion. Mode: auto - The TDC is in auto optimising state. startValue - Starts with the desired value, then it goes to au…
1.3.6.1.4.1.8708.2.4.2.2.1.1.116ColumnwdmIfLineControlLoopCurrentStateread-onlycurrentThe current state of the unit. The unit is ready if state=Automatic fine-tuning. The states could be one of the followings: Init DPSK. DPSK Tx Locked. Init EDF…
1.3.6.1.4.1.8708.2.4.2.2.1.1.117ColumnwdmIfSignalDegradeThresholdread-writecurrentThreshold for signal degraded alarm, based on BER value. The threshold is settable on the first line port, affecting all line ports. Predefined BER levels rxBe…
1.3.6.1.4.1.8708.2.4.2.2.1.1.118ColumnwdmIfTrxThresholdOptimizationStateread-onlycurrentThreshold Optimization State. Idle - No regulation done Searching - Rough threshold regulation is being performed Optimizing - Fine threshold regulation is bei…
1.3.6.1.4.1.8708.2.4.2.2.1.1.119ColumnwdmIfTrxDecisionThresholdread-onlycurrentThe threshold is automatically optimized if the 'Continous optimization' functionality is enabled. Press the 'Optimize' button to manually trigger the optimiza…
1.3.6.1.4.1.8708.2.4.2.2.1.1.120ColumnwdmIfSwControlledLaserShutdownread-onlycurrentenabled - the laser is turned off for a specified time, until the timer expires disabled - normal state
1.3.6.1.4.1.8708.2.4.2.2.1.1.121ColumnwdmIfChangeSwControlledLaserShutdownCommandread-onlycurrentCommand to shut the laser down for a user-defined period of time. This setting will over-ride other laser control functions like ALS and protection. The timer …
1.3.6.1.4.1.8708.2.4.2.2.1.1.122ColumnwdmIfControlledLaserShutdownEnabledread-onlycurrentSoftware controlled laser shutdown is enabled. Activation - When the command is successfully applied. De-activation - When the timer expires, or the operation …
1.3.6.1.4.1.8708.2.4.2.2.1.1.123ColumnwdmIfAidread-onlycurrentThe access identifier (AID) of the interface. The format is according to GR-833.
1.3.6.1.4.1.8708.2.4.2.2.1.1.124ColumnwdmIfPhysicalLocationread-onlycurrentThe physical location of the if.
1.3.6.1.4.1.8708.2.4.2.2.1.1.125ColumnwdmIfTrxTunableread-onlycurrentThe transceiver is of tunable type.
1.3.6.1.4.1.8708.2.4.2.3NodewdmProtList
1.3.6.1.4.1.8708.2.4.2.3.1TablewdmProtTablenot-accessiblecurrentThe protection group table.
1.3.6.1.4.1.8708.2.4.2.3.1.1RowwdmProtEntrynot-accessiblecurrentAn entry in the protection group table.
1.3.6.1.4.1.8708.2.4.2.3.1.1.1ColumnwdmProtIndexread-onlycurrentAn arbitrary index assigned to each entry.
1.3.6.1.4.1.8708.2.4.2.3.1.1.2ColumnwdmProtNameread-onlycurrentThe name of the object, for example 'pg:1:2:1-2:1:3:1-2', where the numbers indicate the subrack, slot and TX-RX port number for the left and right interface o…
1.3.6.1.4.1.8708.2.4.2.3.1.1.3ColumnwdmProtDescrread-writecurrentUser configurable label.
1.3.6.1.4.1.8708.2.4.2.3.1.1.4ColumnwdmProtRightSubrackread-createcurrentThe subrack number for this protected interface.
1.3.6.1.4.1.8708.2.4.2.3.1.1.5ColumnwdmProtRightSlotread-createcurrentThe slot number for this protected interface.
1.3.6.1.4.1.8708.2.4.2.3.1.1.6ColumnwdmProtRightPortread-createcurrentThe port number for the TX side of this protected interface. Not necessary for boards with only one interface.
1.3.6.1.4.1.8708.2.4.2.3.1.1.7ColumnwdmProtLeftSubrackread-createcurrentThe subrack number for the other protected interface.
1.3.6.1.4.1.8708.2.4.2.3.1.1.8ColumnwdmProtLeftSlotread-createcurrentThe slot number for the other protected interface.
1.3.6.1.4.1.8708.2.4.2.3.1.1.9ColumnwdmProtLeftPortread-createcurrentThe port number for the TX side of the other protected interface. Not necessary for boards with only one interface.
1.3.6.1.4.1.8708.2.4.2.3.1.1.10ColumnwdmProtLastChangeTimeread-onlycurrentThe time the operational state of the protection group was last changed.
1.3.6.1.4.1.8708.2.4.2.3.1.1.11ColumnwdmProtAdminStatusread-writecurrentThe administrative state for the protection group. down - The protection group is inactive. leftForced - The left side is forced active. rightForced - The righ…
1.3.6.1.4.1.8708.2.4.2.3.1.1.12ColumnwdmProtOperStatusread-onlydeprecatedNote: This object is deprecated. The operational state for the protection group. bothDown - both sides down leftDownRightUp - left side down, right side up lef…
1.3.6.1.4.1.8708.2.4.2.3.1.1.13ColumnwdmProtRowStatusread-createcurrentManages creation and deletion of conceptual rows. See also SNMPv2-TC.
1.3.6.1.4.1.8708.2.4.2.3.1.1.14ColumnwdmProtServiceDegradedread-onlycurrentProtection service degraded. A: One of the sides of the protection group has signal failure or one side is forced active. D: Both sides of the protection group…
1.3.6.1.4.1.8708.2.4.2.3.1.1.15ColumnwdmProtServiceFailureread-onlycurrentProtection service failure. A: Both sides of the protection group has signal failure or the side that is forced active has signal failure. D: One of the sides …
1.3.6.1.4.1.8708.2.4.2.3.1.1.16ColumnwdmProtActiveSideread-onlycurrentThe operational state for the protection group. none - no side is active. left - the left side is active. right - the right side is active.
1.3.6.1.4.1.8708.2.4.2.3.1.1.17ColumnwdmProtLeftStatusread-onlycurrentThe operational state for the left side of the protection group. down - this side is out of service. up - this side is active.
1.3.6.1.4.1.8708.2.4.2.3.1.1.18ColumnwdmProtRightStatusread-onlycurrentThe operational state for the right side of the protection group. down - this side is out of service. up - this side is active.
1.3.6.1.4.1.8708.2.4.2.3.1.1.19ColumnwdmProtProtectionTyperead-onlycurrentDifferent types of protection realisation and modelling. The information is intended for the TNM. eqAndFiberProtection - multiple boards, e.g. two tpMr2500 or …
1.3.6.1.4.1.8708.2.4.2.3.1.1.20ColumnwdmProtObjectPropertyread-onlycurrentProperty mask.
1.3.6.1.4.1.8708.2.4.2.3.1.1.21ColumnwdmProtWrapperModeread-writecurrentDefines how the wrapper will operate in correlation with the traffic switch. followTraffic - use the same interface as the traffic is selected from. fixedToDef…
1.3.6.1.4.1.8708.2.4.2.3.1.1.22ColumnwdmProtWrapperStateread-onlycurrentShows which interface that currently is used for wrapper communication.
1.3.6.1.4.1.8708.2.4.2.3.1.1.23ColumnwdmProtLeftCommSubrackread-createcurrentThe subrack number of the left communication link for this protection group.
1.3.6.1.4.1.8708.2.4.2.3.1.1.24ColumnwdmProtLeftCommSlotread-createcurrentThe slot number of the left communication link for this protection group.
1.3.6.1.4.1.8708.2.4.2.3.1.1.25ColumnwdmProtLeftCommPortread-createcurrentThe port number of the left communication link for this protection group
1.3.6.1.4.1.8708.2.4.2.3.1.1.26ColumnwdmProtRightCommSubrackread-createcurrentThe subrack number of the right communication link for this protection group.
1.3.6.1.4.1.8708.2.4.2.3.1.1.27ColumnwdmProtRightCommSlotread-createcurrentThe slot number of the right communication link for this protection group.
1.3.6.1.4.1.8708.2.4.2.3.1.1.28ColumnwdmProtRightCommPortread-createcurrentThe port number of the right communication link for this protection group
1.3.6.1.4.1.8708.2.4.2.3.1.1.29ColumnwdmProtLeftCommInterfaceread-onlycurrentThe interface used for the left communication link for this protection group.
1.3.6.1.4.1.8708.2.4.2.3.1.1.30ColumnwdmProtRightCommInterfaceread-onlycurrentThe interface used for the right communication link for this protection group.
1.3.6.1.4.1.8708.2.4.2.3.1.1.31ColumnwdmProtCommunicationFailureread-onlycurrentProtection group communication failure A: There are several underlying criterias for this: - Loss of signal on the communication link - Errors on the communica…
1.3.6.1.4.1.8708.2.4.2.3.1.1.32ColumnwdmProtHubTrafficConfigMismatchread-onlycurrentTraffic configuration received over the two lines differ. A: The traffic configuration received over the two lines do not match. D: Both lines have the same tr…
1.3.6.1.4.1.8708.2.4.2.3.1.1.33ColumnwdmProtSignalDegradeProtectionread-writecurrentInclude signal degraded alarm as a protection switch criteria.
1.3.6.1.4.1.8708.2.4.2.3.1.1.34ColumnwdmProtRevertiveSwitchWtrTimerread-writecurrentWhen revertive mode is enabled and traffic is running on secondary path, this timer decides when to switch back to primary path (when the primary path is up an…
1.3.6.1.4.1.8708.2.4.2.3.1.1.35ColumnwdmProtRevertiveSwitchread-writecurrentIf revertive protection switch is enabled, the primary path will automaticly be chosen as working path if it is operational. A switch back to the primary path …
1.3.6.1.4.1.8708.2.4.2.3.1.1.36ColumnwdmProtRevertiveSwitchPrimaryPathread-writecurrentThe interface in the protection group that should be used as prefered working path.
1.3.6.1.4.1.8708.2.4.2.3.1.1.37ColumnwdmProtRevertiveSwitchSecondaryPathread-onlycurrentThe interface in the protection group that is used as prefered protection path. This is set automatically when choosing the primary working path.
1.3.6.1.4.1.8708.2.4.2.3.1.1.38ColumnwdmProtSecondaryPathUsedread-onlycurrentAlarm indicating that the alternative secondary path is currently used, when revertive switching is enabled. A: Secondary path is used as working path. D: Prim…
1.3.6.1.4.1.8708.2.4.2.4NodelumentisWdmNotifications
1.3.6.1.4.1.8708.2.4.2.4.0NodewdmNotifyPrefix
1.3.6.1.4.1.8708.2.4.2.4.0.1NotificationwdmProtOperStatusBothDowndeprecatedSent when the protection group changes operational status.
1.3.6.1.4.1.8708.2.4.2.4.0.2NotificationwdmProtOperStatusLeftDownRightUpdeprecatedSent when the protection group changes operational status.
1.3.6.1.4.1.8708.2.4.2.4.0.3NotificationwdmProtOperStatusLeftDownRightStandbydeprecatedSent when the protection group changes operational status.
1.3.6.1.4.1.8708.2.4.2.4.0.4NotificationwdmProtOperStatusLeftStandbyRightDowndeprecatedSent when the protection group changes operational status.
1.3.6.1.4.1.8708.2.4.2.4.0.5NotificationwdmProtOperStatusLeftStandbyRightUpdeprecatedSent when the protection group changes operational status.
1.3.6.1.4.1.8708.2.4.2.4.0.6NotificationwdmProtOperStatusLeftUpRightDowndeprecatedSent when the protection group changes operational status.
1.3.6.1.4.1.8708.2.4.2.4.0.7NotificationwdmProtOperStatusLeftUpRightStandbydeprecatedSent when the protection group changes operational status.
1.3.6.1.4.1.8708.2.4.2.4.0.8NotificationwdmIfLaserStatusOncurrentSent when the laser of the interface is turned on.
1.3.6.1.4.1.8708.2.4.2.4.0.9NotificationwdmIfLaserStatusOffcurrentSent when the laser of the interface is turned off.
1.3.6.1.4.1.8708.2.4.2.4.0.10NotificationwdmProtStatusChangedcurrentSent when the protection group changes operational status.
1.3.6.1.4.1.8708.2.4.2.5NodewdmPassiveIfList
1.3.6.1.4.1.8708.2.4.2.5.1TablewdmPassiveIfTablenot-accessiblecurrentThe interface list.
1.3.6.1.4.1.8708.2.4.2.5.1.1RowwdmPassiveIfEntrynot-accessiblecurrentAn entry in the interface list. Each interface consists of a uni- or bi-directional port.
1.3.6.1.4.1.8708.2.4.2.5.1.1.1ColumnwdmPassiveIfIndexread-onlycurrentAn arbitrary index assigned to each entry.
1.3.6.1.4.1.8708.2.4.2.5.1.1.2ColumnwdmPassiveIfNameread-onlycurrentThe management name of the interface, for example 'wdmi:1:2:1', where the first number indicates sub-rack, the second slot number and the third is the port num…
1.3.6.1.4.1.8708.2.4.2.5.1.1.3ColumnwdmPassiveIfDescrread-writecurrentUser configurable label.
1.3.6.1.4.1.8708.2.4.2.5.1.1.5ColumnwdmPassiveIfSubrackread-onlycurrentThe number of the subrack where the interface is located.
1.3.6.1.4.1.8708.2.4.2.5.1.1.6ColumnwdmPassiveIfSlotread-onlycurrentThe number of the slot where the interface is located.
1.3.6.1.4.1.8708.2.4.2.5.1.1.7ColumnwdmPassiveIfPortread-onlycurrentThe number of the port where the interface is located.
1.3.6.1.4.1.8708.2.4.2.5.1.1.8ColumnwdmPassiveIfInvPhysIndexOrZeroread-onlycurrentThe row in the invPhysTable for this interface. Set to 0 if not known.
1.3.6.1.4.1.8708.2.4.2.5.1.1.9ColumnwdmPassiveIfDirectionread-onlycurrentThe type of signal the interface expects. rx - Only ingoing signal. LambdaType, LambdaMin and LambdaMax indicates the frequency properties for the ingoing sign…
1.3.6.1.4.1.8708.2.4.2.5.1.1.10ColumnwdmPassiveIfLambdaTyperead-onlycurrentThe type of wavelengths the port of the interface can accomodate. fixed - The port received or transmits a fixed frequency. range - The port can handle a range…
1.3.6.1.4.1.8708.2.4.2.5.1.1.11ColumnwdmPassiveIfLambdaread-onlycurrentThe frequency given in hundreds of GHz (0.01 GHz). Set to 0 for transparent ports.
1.3.6.1.4.1.8708.2.4.2.5.1.1.12ColumnwdmPassiveIfLambdaMaxread-onlycurrentThe maximum frequency (for the 'wavelength') in GHz.
1.3.6.1.4.1.8708.2.4.2.5.1.1.13ColumnwdmPassiveIfLastChangeTimeread-onlydeprecatedThe time when the state of the interface entry was last changed.
1.3.6.1.4.1.8708.2.4.2.5.1.1.14ColumnwdmPassiveIfExpectedLambdaread-writecurrentThe frequency of the 'wavelength' given in hundreds of GHz (0.01 GHz). This attribute can be written via SNMP.
1.3.6.1.4.1.8708.2.4.2.5.1.1.15ColumnwdmPassiveIfUnexpectedLambdaread-onlycurrentThe actual frequency does not match the hundreds of GHz (0.01 GHz). The actual frequency does not match the pre-configured frequency. A pre-configured frequenc…
1.3.6.1.4.1.8708.2.4.2.5.1.1.16ColumnwdmPassiveIfAdminStatusread-writecurrentThe administrative state for the port. down - The alarm are inhibited up - Alarms are reported
1.3.6.1.4.1.8708.2.4.2.5.1.1.17ColumnwdmPassiveIfOperStatusread-onlycurrentThe operational state for the port. notPresent - The board is missing down - Admin down up - The board is present and admin up
1.3.6.1.4.1.8708.2.4.2.5.1.1.18ColumnwdmPassiveIfObjectPropertyread-onlycurrentProperty mask.
1.3.6.1.4.1.8708.2.4.2.5.1.1.19ColumnwdmPassiveIfExpectedLambdaMaxread-writecurrentThe Max frequency of the 'wavelength' range given in hundreds of GHz (0.01 GHz). This attribute can be written via SNMP.
1.3.6.1.4.1.8708.2.4.2.5.1.1.20ColumnwdmPassiveIfAidread-onlycurrentThe access identifier (AID) of the interface. The format is according to GR-833.
1.3.6.1.4.1.8708.2.4.2.5.1.1.21ColumnwdmPassiveIfPhysicalLocationread-onlycurrentThe physical location of the if. The format is according to GR-833.
1.3.6.1.4.1.8708.2.4.2.5.1.1.22ColumnwdmPassiveIfIfNoread-onlycurrentThe number of the port where the interface is located.
1.3.6.1.4.1.8708.2.4.2.6NodewdmVc4List
1.3.6.1.4.1.8708.2.4.2.6.1TablewdmVc4Tablenot-accessiblecurrentThe interface list.
1.3.6.1.4.1.8708.2.4.2.6.1.1RowwdmVc4Entrynot-accessiblecurrentAn entry in the interface list.
1.3.6.1.4.1.8708.2.4.2.6.1.1.1ColumnwdmVc4Indexread-onlycurrentAn arbitrary index assigned to each if entry.
1.3.6.1.4.1.8708.2.4.2.6.1.1.2ColumnwdmVc4Nameread-onlycurrentThe management name of the vc4/vc3/STS-1, e.g. vc4:1:2:1-2:8 where the first number indicates sub-rack, the second slot number and the third/forth are the port…
1.3.6.1.4.1.8708.2.4.2.6.1.1.3ColumnwdmVc4Descrread-writecurrentUser configurable label.
1.3.6.1.4.1.8708.2.4.2.6.1.1.4ColumnwdmVc4Subrackread-onlycurrentThe number of the subrack where the vc4/vc3/STS-1 is located.
1.3.6.1.4.1.8708.2.4.2.6.1.1.5ColumnwdmVc4Slotread-onlycurrentThe number of the slot where the vc4/vc3/STS-1 is located.
1.3.6.1.4.1.8708.2.4.2.6.1.1.6ColumnwdmVc4TxPortread-onlycurrentThe number of the port where the TX-side of the vc4/vc3/STS-1 is located.
1.3.6.1.4.1.8708.2.4.2.6.1.1.7ColumnwdmVc4RxPortread-onlycurrentThe number of the port where the RX-side of the vc4/vc3/STS-1 is located.
1.3.6.1.4.1.8708.2.4.2.6.1.1.8ColumnwdmVc4Vc4read-onlycurrentThe id of the vc4 within the STM64/STM16 frame. When Sonet, the id of the STS3 within the OC192/OC48 frame.
1.3.6.1.4.1.8708.2.4.2.6.1.1.9ColumnwdmVc4ObjectPropertyread-onlycurrentProperty mask.
1.3.6.1.4.1.8708.2.4.2.6.1.1.10ColumnwdmVc4AuAlarmIndicationSignalread-onlycurrentAlarm indication signal (AIS). Applicable for SDH/Sonet signal formats. A: An 'all ones' SDH/Sonet signal is detected. D: SDH/Sonet signal recovered.
1.3.6.1.4.1.8708.2.4.2.6.1.1.11ColumnwdmVc4AuLossOfPointerread-onlycurrentLoss of pointer detected. Applicable for SDH/Sonet signal formats. A: A loss of pointer is detected. D: SDH/Sonet signal recovered.
1.3.6.1.4.1.8708.2.4.2.6.1.1.12ColumnwdmVc4RxSignalStatusread-onlycurrentThe operational state for incoming (RX) signal of the interface. down - A fault that would lead to a protection switch has occurred. degraded - The signal qual…
1.3.6.1.4.1.8708.2.4.2.6.1.1.13ColumnwdmVc4ConcatenationStatusread-onlycurrentDescribes if and how the VC4s are concatenated. In case of sonet how the STS3s are concatenated. on - Concatenation is used. off - No concatenation is used. ca…
1.3.6.1.4.1.8708.2.4.2.6.1.1.14ColumnwdmVc4PayloadStatusread-onlycurrentDescribes if the VC4/STS3 contains payload. equipped - VC4/STS3 contains payload. unequipped - No payload in VC4/STS3.
1.3.6.1.4.1.8708.2.4.2.6.1.1.15ColumnwdmVc4ConnectionStatusread-onlycurrentShows the name of the client port and possible subchannel/vc4 that it is connected to or Unconnected if not connected.
1.3.6.1.4.1.8708.2.4.2.6.1.1.16ColumnwdmVc4ConnectedForeignIndexread-writecurrentShows the index of the connected interface. Or 0 if unconnected.
1.3.6.1.4.1.8708.2.4.2.6.1.1.17ColumnwdmVc4AdminStatusread-writecurrentThe administrative state for the vc4/vc3/STS-1. down - The vc3/vc4/STS-1 should not be used. This vc4/vc3 will not affect rxSignalStatus. up - The vc4/vc3/STS-…
1.3.6.1.4.1.8708.2.4.2.7NodewdmRemoteProtList
1.3.6.1.4.1.8708.2.4.2.7.1TablewdmRemoteProtTablenot-accessiblecurrentThe protection group table.
1.3.6.1.4.1.8708.2.4.2.7.1.1RowwdmRemoteProtEntrynot-accessiblecurrentAn entry in the protection group table.
1.3.6.1.4.1.8708.2.4.2.7.1.1.1ColumnwdmRemoteProtIndexread-onlycurrentAn arbitrary index assigned to each entry.
1.3.6.1.4.1.8708.2.4.2.7.1.1.2ColumnwdmRemoteProtNameread-onlycurrentThe name of the object, for example 'rpg:1:2:1', where the numbers indicate the subrack, slot and TX port number for the local interface of the group. The inte…
1.3.6.1.4.1.8708.2.4.2.7.1.1.3ColumnwdmRemoteProtDescrread-writecurrentUser configurable label.
1.3.6.1.4.1.8708.2.4.2.7.1.1.4ColumnwdmRemoteProtLocalSubrackread-createcurrentThe subrack number for this protected interface.
1.3.6.1.4.1.8708.2.4.2.7.1.1.5ColumnwdmRemoteProtLocalSlotread-createcurrentThe slot number for this protected interface.
1.3.6.1.4.1.8708.2.4.2.7.1.1.6ColumnwdmRemoteProtLocalPortread-createcurrentThe port number for the TX side of this protected interface.
1.3.6.1.4.1.8708.2.4.2.7.1.1.7ColumnwdmRemoteProtCommSubrackread-createcurrentThe subrack number of the communication link for this protection group.
1.3.6.1.4.1.8708.2.4.2.7.1.1.8ColumnwdmRemoteProtCommSlotread-createcurrentThe slot number of the communication link for this protection group.
1.3.6.1.4.1.8708.2.4.2.7.1.1.9ColumnwdmRemoteProtCommPortread-createcurrentThe port number of the communication link for this protection group
1.3.6.1.4.1.8708.2.4.2.7.1.1.10ColumnwdmRemoteProtCommInterfaceread-onlycurrentThe port number of the communication link for this protection group
1.3.6.1.4.1.8708.2.4.2.7.1.1.11ColumnwdmRemoteProtLastChangeTimeread-onlycurrentThe time the operational state of the protection group was last changed.
1.3.6.1.4.1.8708.2.4.2.7.1.1.12ColumnwdmRemoteProtIpAddressread-createcurrentThe IP-address of the remote node.
1.3.6.1.4.1.8708.2.4.2.7.1.1.13ColumnwdmRemoteProtIdentifierread-createcurrentThe identifier (name) of the protection group that is understod by both the local and the remote node.
1.3.6.1.4.1.8708.2.4.2.7.1.1.14ColumnwdmRemoteProtRoleread-createcurrentThe role of the node in this protection group. master - the manager should read info from this node. slave - the manager should read from the other node
1.3.6.1.4.1.8708.2.4.2.7.1.1.15ColumnwdmRemoteProtAdminStatusread-writecurrentThe administrative state for the protection group. down - The protection group is inactive. localForced - The local side is forced active. remoteForced - The r…
1.3.6.1.4.1.8708.2.4.2.7.1.1.16ColumnwdmRemoteProtRowStatusread-createcurrentManages creation and deletion of conceptual rows. See also SNMPv2-TC.
1.3.6.1.4.1.8708.2.4.2.7.1.1.17ColumnwdmRemoteProtActiveSideread-onlycurrentThe operational state for the protection group. none - no side is active. local - the local side is active. remote - the remote side is active.
1.3.6.1.4.1.8708.2.4.2.7.1.1.18ColumnwdmRemoteProtLocalStatusread-onlycurrentThe operational state for the local side of the protection group. down - this side is out of service. up - this side is working.
1.3.6.1.4.1.8708.2.4.2.7.1.1.19ColumnwdmRemoteProtRemoteStatusread-onlycurrentThe operational state for the remote side of the protection group. down - this side is out of service. up - this side is working.
1.3.6.1.4.1.8708.2.4.2.7.1.1.20ColumnwdmRemoteProtObjectPropertyread-onlycurrentProperty mask.
1.3.6.1.4.1.8708.2.4.2.7.1.1.21ColumnwdmRemoteProtServiceDegradedread-onlycurrentProtection service degraded. A: One of the sides of the protection group has signal failure or one side is forced active. D: Both sides of the protection group…
1.3.6.1.4.1.8708.2.4.2.7.1.1.22ColumnwdmRemoteProtServiceFailureread-onlycurrentProtection service failure. A: Both sides of the protection group has signal failure or the side that is forced active has signal failure. D: One of the sides …
1.3.6.1.4.1.8708.2.4.2.7.1.1.23ColumnwdmRemoteProtSetupread-onlycurrentProcedure to setup the protection group. - Communication Interface Select from a list of available interfaces - Remote IP-address Select from a list of discove…
1.3.6.1.4.1.8708.2.4.2.7.1.1.24ColumnwdmRemoteProtSetupFailureread-onlycurrentProtection group setup failure. A: The defined remote IP-address and/or protection group identifier can not be resolved with the peer node. D: The protection g…
1.3.6.1.4.1.8708.2.4.2.7.1.1.25ColumnwdmRemoteProtRoleConflictread-onlycurrentProtection group master/slave conflict. A: The protection group is resolved, but the two peers have the same role defined - both master, or both slave D: Their…
1.3.6.1.4.1.8708.2.4.2.7.1.1.26ColumnwdmRemoteProtCommunicationFailureread-onlycurrentProtection group communication failure A: There are several underlying criterias for this: - Loss of signal on the communication link - Errors on the communica…
1.3.6.1.4.1.8708.2.4.2.8NodewdmCtrlChannelList
1.3.6.1.4.1.8708.2.4.2.8.1TablewdmCtrlChannelTablenot-accessiblecurrentThe interface list.
1.3.6.1.4.1.8708.2.4.2.8.1.1RowwdmCtrlChannelEntrynot-accessiblecurrentAn entry in the interface list.
1.3.6.1.4.1.8708.2.4.2.8.1.1.1ColumnwdmCtrlChannelIndexread-onlycurrentAn index assigned to each entry. The index contains information about subrack, slot and port for controlled channel.
1.3.6.1.4.1.8708.2.4.2.8.1.1.2ColumnwdmCtrlChannelNameread-onlycurrentThe management name of the channel, for example 'ch:1:2:1:959' (ch:[subrack]:[slot]:[port]:[channel]).
1.3.6.1.4.1.8708.2.4.2.8.1.1.3ColumnwdmCtrlChannelSubrackread-createcurrentThe subrack number of the unit where the controlled channel is attenuated.
1.3.6.1.4.1.8708.2.4.2.8.1.1.4ColumnwdmCtrlChannelSlotread-createcurrentThe slot number of the unit where the controlled channel is attenuated.
1.3.6.1.4.1.8708.2.4.2.8.1.1.5ColumnwdmCtrlChannelTxPortread-onlycurrentThe port number of the controlled channel in the unit where the channel is attenuated.
1.3.6.1.4.1.8708.2.4.2.8.1.1.6ColumnwdmCtrlChannelChannelread-createcurrentThe frequency of the 'wavelength' given in hundreds of GHz (0.01 GHz).
1.3.6.1.4.1.8708.2.4.2.8.1.1.7ColumnwdmCtrlChannelGroupNumberread-createcurrentThe number of the group to which the controlled channel belongs.
1.3.6.1.4.1.8708.2.4.2.8.1.1.8ColumnwdmCtrlChannelAdminStatusread-writecurrentThe administrative state for the channel control. down - The channel control is inactive. Channel attenuation is set to its maximum value. service - The channe…
1.3.6.1.4.1.8708.2.4.2.8.1.1.9ColumnwdmCtrlChannelWantedOutputPowerread-writecurrentThe wanted output power.
1.3.6.1.4.1.8708.2.4.2.8.1.1.10ColumnwdmCtrlChannelCurrentOutputPowerread-onlycurrentThe actual output power.
1.3.6.1.4.1.8708.2.4.2.8.1.1.11ColumnwdmCtrlChannelCurrentAttenuationread-onlycurrentThe current attenuation.
1.3.6.1.4.1.8708.2.4.2.8.1.1.12ColumnwdmCtrlChannelForceRegulationCommandread-onlycurrentStarts a regulation manually
1.3.6.1.4.1.8708.2.4.2.8.1.1.13ColumnwdmCtrlChannelOuputPowerControlFailureread-onlycurrentAlarm raised when the wanted output power can not be obtained. That is a) The wanted power has not been obtained after the maximum number of consequent control…
1.3.6.1.4.1.8708.2.4.2.8.1.1.14ColumnwdmCtrlChannelCurrentPowerOutOfRangeread-onlycurrentAlarm raised when the current output power is outside the 'regulation range' for the group. At this point, no regulation will be performed on the channel. The …
1.3.6.1.4.1.8708.2.4.2.8.1.1.15ColumnwdmCtrlChannelAttenuationOutOfRangeread-onlycurrentAlarm raised when the attenuation is at the maximum or minimum values for the controlled device and the wantedOutputPower cannot be obtained. At this point, no…
1.3.6.1.4.1.8708.2.4.2.8.1.1.16ColumnwdmCtrlChannelStatusread-onlycurrentThe regulation status of the channel. initial - No regulation has been performed yet. searching - The system is trying to detect the channel. regulating - The …
1.3.6.1.4.1.8708.2.4.2.8.1.1.17ColumnwdmCtrlChannelStartupChannelread-writecurrentInitiates a safe startup procedure for the channel when set to 'start'. If the administrative status of the channel is 'down' or the channel is not detected by…
1.3.6.1.4.1.8708.2.4.2.8.1.1.18ColumnwdmCtrlChannelMonitorIndexread-onlycurrentShows the index of the connected monitor interface.
1.3.6.1.4.1.8708.2.4.2.8.1.1.19ColumnwdmCtrlChannelStartupCommandread-onlycurrentInitiates a safe startup sequence for the channel. If the administrative status of the channel is 'down' or the channel is not detected by the monitor unit, th…
1.3.6.1.4.1.8708.2.4.2.8.1.1.20ColumnwdmCtrlChannelSfpMissingread-onlycurrentAn expected SFP is missing. A(ctivation): An expected SFP is missing. D(e-activation): The missing SFP is inserted.
1.3.6.1.4.1.8708.2.4.2.8.1.1.21ColumnwdmCtrlChannelSfpMediaMismatchread-onlycurrentThe type of the SFP used for the channel port is not the expected. A(ctivation): Invalid or mismatching SFP media is detected. D(e-activation): The correct SFP…
1.3.6.1.4.1.8708.2.4.2.8.1.1.22ColumnwdmCtrlChannelLossOfSignalread-onlycurrentLoss of signal at the channel port. A(ctivation): Active loss of signal HW indication. D(e-activation): Inactive loss of signal HW indication.
1.3.6.1.4.1.8708.2.4.2.8.1.1.23ColumnwdmCtrlChannelDescrread-writecurrentUser configurable label. This attribute can be written via SNMP.
1.3.6.1.4.1.8708.2.4.2.8.1.1.24ColumnwdmCtrlChannelMaxAttenuationread-onlycurrentThe max attenuation limit on channel.
1.3.6.1.4.1.8708.2.4.2.8.1.1.25ColumnwdmCtrlChannelMinAttenuationread-onlycurrentThe min attenuation limit on channel.
1.3.6.1.4.1.8708.2.4.2.8.1.1.26ColumnwdmCtrlChannelAttenControlOffsetread-writecurrentThe threshold offset to max/min attenuation on the channel. If the threshold is reached, AttenControlDegraded alarm will be raised.
1.3.6.1.4.1.8708.2.4.2.8.1.1.27ColumnwdmCtrlChannelAttenControlDegradedread-onlycurrentAlarm is raised when channel attenuation is crossing threshold to max/min attenuation. A(ctivation): Active the alarm indication. D(e-activation): Inactive the…
1.3.6.1.4.1.8708.2.4.2.8.1.1.28ColumnwdmCtrlChannelNotFoundread-onlycurrentChannel not found.
1.3.6.1.4.1.8708.2.4.2.9NodewdmCtrlGroupList
1.3.6.1.4.1.8708.2.4.2.9.1TablewdmCtrlGroupTablenot-accessiblecurrentThe interface list.
1.3.6.1.4.1.8708.2.4.2.9.1.1RowwdmCtrlGroupEntrynot-accessiblecurrentAn entry in the interface list.
1.3.6.1.4.1.8708.2.4.2.9.1.1.1ColumnwdmCtrlGroupIndexread-onlycurrentAn index assigned to each entry. Index contains information about group number, subrack, slot and port.
1.3.6.1.4.1.8708.2.4.2.9.1.1.2ColumnwdmCtrlGroupNameread-onlycurrentThe management name of the group, for example 'group:1' (group:[groupNumber]).
1.3.6.1.4.1.8708.2.4.2.9.1.1.3ColumnwdmCtrlGroupDescrread-writecurrentUser configurable label.
1.3.6.1.4.1.8708.2.4.2.9.1.1.4ColumnwdmCtrlGroupGroupNumberread-createcurrentA unique number identifying the group.
1.3.6.1.4.1.8708.2.4.2.9.1.1.5ColumnwdmCtrlGroupSubrackread-createcurrentThe number of the subrack where the monitor unit is located.
1.3.6.1.4.1.8708.2.4.2.9.1.1.6ColumnwdmCtrlGroupSlotread-createcurrentThe number of the slot where the monitor is located.
1.3.6.1.4.1.8708.2.4.2.9.1.1.7ColumnwdmCtrlGroupPortread-createcurrentThe monitor port where the group is connected. Each character represents a port number, as shown: a->1, b->2, c->3, d->4, e->5, f->6, g->7, h->8.
1.3.6.1.4.1.8708.2.4.2.9.1.1.8ColumnwdmCtrlGroupMonitorNameread-onlycurrentThe management name of the monitor port, for example 'ocm:1:2:1-A' ([monitortype]:[subrack]:[slot]:[port]).
1.3.6.1.4.1.8708.2.4.2.9.1.1.9ColumnwdmCtrlGroupAdminStatusread-writecurrentThe administrative state for the group. down - The group is de-activated. No regulations will be performed. service - The group is activated but alarms are sup…
1.3.6.1.4.1.8708.2.4.2.9.1.1.10ColumnwdmCtrlGroupControlModeread-onlycurrentThe current control group mode. normal - regulation is performed at the interval defined in General -> Regulation interval commissioning - the regulation is pe…
1.3.6.1.4.1.8708.2.4.2.9.1.1.11ColumnwdmCtrlGroupConfigurationCommandread-onlycurrentSelect which control mode to use: normal - regulation is performed at the interval defined in General -> Regulation interval commissioning - the regulation is …
1.3.6.1.4.1.8708.2.4.2.9.1.1.12ColumnwdmCtrlGroupForceRegulationCommandread-onlycurrentStarts a regulation manually
1.3.6.1.4.1.8708.2.4.2.9.1.1.13ColumnwdmCtrlGroupLockedRangeread-writecurrentTo avoid frequent changes of attenuation, a range can be defined around the wanted output power. A control loop will not try to adjust power values within the …
1.3.6.1.4.1.8708.2.4.2.9.1.1.14ColumnwdmCtrlGroupRegulationRangeread-writecurrentAn offset below the wanted output power at which the 'Current Power Out Of Range' alarm shall be raised. When the current output power is so far below the want…
1.3.6.1.4.1.8708.2.4.2.9.1.1.15ColumnwdmCtrlGroupRegulationLastChangeTimeread-onlycurrentThe time when the group was last regulated.
1.3.6.1.4.1.8708.2.4.2.9.1.1.16ColumnwdmCtrlGroupCommissioningModeread-onlycurrentAlarm raised when the group is put in commissioning mode. A: Commissioning mode is used D: Normal mode
1.3.6.1.4.1.8708.2.4.2.9.1.1.17ColumnwdmCtrlGroupAssociateChannelread-onlycurrentCreates one or several control channel objects and associates them to the selected group. User needs to specify: - The board where the added channels are atten…
1.3.6.1.4.1.8708.2.4.2.9.1.1.18ColumnwdmCtrlGroupNoOfChannelsread-onlycurrentThe current number of channels associated with this group.
1.3.6.1.4.1.8708.2.4.2.9.1.1.19ColumnwdmCtrlGroupStatusread-onlycurrentThe regulation status for the group starting - the system is starting up noRegulation - the group contains no channels to regulate reading - the control loop i…
1.3.6.1.4.1.8708.2.4.2.9.1.1.20ColumnwdmCtrlGroupTimeLeftread-onlycurrentThe remaining time (in seconds) to next regulation.
1.3.6.1.4.1.8708.2.4.2.9.1.1.21ColumnwdmCtrlGroupOutputPowerMismatchread-onlycurrentThe total output power of the OCM differs by more than 1.4dB from the monitor port insertion loss value of the OA. A: The total output power of the OCM differs…
1.3.6.1.4.1.8708.2.4.2.9.1.1.22ColumnwdmCtrlGroupTotalPowerread-onlycurrentTotal power of channels associated to this group, based on OCM measurements.
1.3.6.1.4.1.8708.2.4.2.9.1.1.23ColumnwdmCtrlGroupChannelStartupCommandread-onlycurrentInitiates a safe startup sequence for all the channels of selected group. If the administrative status of the channel is 'down' or the channel is not detected …
1.3.6.1.4.1.8708.2.4.2.10NodewdmSubChannelList
1.3.6.1.4.1.8708.2.4.2.10.1TablewdmSubChannelTablenot-accessiblecurrentThe interface list.
1.3.6.1.4.1.8708.2.4.2.10.1.1RowwdmSubChannelEntrynot-accessiblecurrentAn entry in the interface list.
1.3.6.1.4.1.8708.2.4.2.10.1.1.1ColumnwdmSubChannelIndexread-onlycurrentAn index assigned to each entry. The index contains information about subrack, slot and port for controlled channel.
1.3.6.1.4.1.8708.2.4.2.10.1.1.2ColumnwdmSubChannelNameread-onlycurrentThe management name of the interface, for example 'channel:1:2:1-2:19' (channel:[subrack]:[slot]:[port]:[channel]).
1.3.6.1.4.1.8708.2.4.2.10.1.1.3ColumnwdmSubChannelIdread-onlycurrentThe channelId within the line signal.
1.3.6.1.4.1.8708.2.4.2.10.1.1.4ColumnwdmSubChannelTyperead-onlycurrentShows what format(s) this channel is used for. (e1t1, fe or gbeFe)
1.3.6.1.4.1.8708.2.4.2.10.1.1.5ColumnwdmSubChannelUnequippedread-onlycurrentShows whether the remote node has inserted payload into this channel. A: No payload is received on this channel D: Payload is received again
1.3.6.1.4.1.8708.2.4.2.10.1.1.6ColumnwdmSubChannelConnectionStatusread-onlycurrentShows the name of the client port and possible subchannel that it is connected to or Unconnected if not connected.
1.3.6.1.4.1.8708.2.4.2.10.1.1.7ColumnwdmSubChannelConnectedForeignIndexread-writecurrentShows the index of the connected interface. Or 0 if unconnected.
1.3.6.1.4.1.8708.2.4.2.10.1.1.8ColumnwdmSubChannelCrossConnectread-onlycurrentConnect a subchannel to a specific client and subchannel
1.3.6.1.4.1.8708.2.4.2.10.1.1.9ColumnwdmSubChannelDisconnectread-onlycurrentDisconnect existing crossConnections
1.3.6.1.4.1.8708.2.4.2.10.1.1.10ColumnwdmSubChannelRemoteAccessInterfaceread-onlycurrentShows the name of the client port in the remote access node that terminated the sub channel. For sub channels that are not terminated in the remote node, 'Not …
1.3.6.1.4.1.8708.2.4.2.10.1.1.11ColumnwdmSubChannelProtectedChannelIndexread-writecurrentShows the index of the protected chanel. Or 0 if not active protection. updates when protection state is changed.
1.3.6.1.4.1.8708.2.4.2.11NodewdmCtrlGlobal
1.3.6.1.4.1.8708.2.4.2.11.1ScalarwdmCtrlGlobalRegulationIntervalread-writecurrentThe time interval between regulations in normal mode. interval5min - 5 minutes interval interval30min - 30 minutes interval
1.3.6.1.4.1.8708.2.4.2.11.2ScalarwdmCtrlGlobalRegulationStatusread-onlycurrentThe current status of the control loop. initial - No regulation has been performed yet. searching - Trying to detect channels. reading - Reading power values f…
1.3.6.1.4.1.8708.2.4.2.11.3ScalarwdmCtrlGlobalLastRegulationread-onlycurrentThe date and time of the last regulation.
1.3.6.1.4.1.8708.2.4.2.11.4ScalarwdmCtrlGlobalTimeLeftread-onlycurrentTime left to next scheduled regulation. Unit: seconds.
1.3.6.1.4.1.8708.2.4.2.12NodewdmDelayCompPGList
1.3.6.1.4.1.8708.2.4.2.12.1TablewdmDelayCompPGTablenot-accessiblecurrentDelay compensation for protection groups table.
1.3.6.1.4.1.8708.2.4.2.12.1.1RowwdmDelayCompPGEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.8708.2.4.2.12.1.1.1ColumnwdmDelayCompPGIndexread-onlycurrentAn index assigned to each entry. The index contains information about subrack, slot and port for controlled channel.
1.3.6.1.4.1.8708.2.4.2.12.1.1.2ColumnwdmDelayCompPGNameread-onlycurrentThe management name of the entry, for example 'dcpg:1:3:17-18:1:3:19-20' (dcpg:[subrack]:[slot]:[leftporttx]-[leftportrx]:[subrack]:[slot]:[rightporttx]-[right…
1.3.6.1.4.1.8708.2.4.2.12.1.1.3ColumnwdmDelayCompPGUpIdread-onlycurrentThe UpId within the table.
1.3.6.1.4.1.8708.2.4.2.12.1.1.4ColumnwdmDelayCompPGAdminStatusread-writecurrentThe administrative state for the object. service - The object is activated but alarms are suppressed. Intended for use during service or re-configuration. When…
1.3.6.1.4.1.8708.2.4.2.12.1.1.5ColumnwdmDelayCompPGOperStatusread-onlycurrentThe operational state for the object. notPresent - The object is not available. down - The object is de-activated or there are faults preventing its transition…
1.3.6.1.4.1.8708.2.4.2.12.1.1.6ColumnwdmDelayCompPGAutoCompensationModeread-writecurrentThe automatic delay compensation mode.
1.3.6.1.4.1.8708.2.4.2.12.1.1.7ColumnwdmDelayCompPGAutoCompensationStateread-onlycurrentThe automatic delay compensation state.
1.3.6.1.4.1.8708.2.4.2.12.1.1.8ColumnwdmDelayCompPGDelayDifferenceread-onlycurrentThe current delay difference in nanoseconds, after compensation. The difference is calculated as (right line current delay) - (left line current delay).
1.3.6.1.4.1.8708.2.4.2.12.1.1.9ColumnwdmDelayCompPGDelayCompensationOORread-onlycurrentDelay compensation out-of-range. alarm: The delay compensation is out-of-range. ok: The delay compensation is in range.
1.3.6.1.4.1.8708.2.4.2.12.1.1.10ColumnwdmDelayCompPGFiberLengthDifferenceOORread-onlycurrentFiber length difference out-of-range. alarm: The fiber length difference is out-of-range. ok: The fiber length difference is in range.
1.3.6.1.4.1.8708.2.4.2.12.1.1.11ColumnwdmDelayCompPGDelayCompensationResetread-onlycurrentResets the automatic delay compensation. After a successful reset the default value (normal) is restored in this attribute.
1.3.6.1.4.1.8708.2.4.2.13NodewdmDelayCompLinkList
1.3.6.1.4.1.8708.2.4.2.13.1TablewdmDelayCompLinkTablenot-accessiblecurrentDelay compensation for protection group links table.
1.3.6.1.4.1.8708.2.4.2.13.1.1RowwdmDelayCompLinkEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.8708.2.4.2.13.1.1.1ColumnwdmDelayCompLinkIndexread-onlycurrentAn index assigned to each entry. The index contains information about subrack, slot and port for controlled channel.
1.3.6.1.4.1.8708.2.4.2.13.1.1.2ColumnwdmDelayCompLinkNameread-onlycurrentThe management name of the entry, for example 'dclink:1:3:17-18' (dclink:[subrack]:[slot]:[porttx]-[portrx]).
1.3.6.1.4.1.8708.2.4.2.13.1.1.3ColumnwdmDelayCompLinkUpIdread-onlycurrentThe UpId within the table.
1.3.6.1.4.1.8708.2.4.2.13.1.1.4ColumnwdmDelayCompLinkCurrentDelayCompensationread-onlycurrentThe current delay compensation in nanoseconds. Note, the granularity of this value is determined by the hardware capabilities.
1.3.6.1.4.1.8708.2.4.2.13.1.1.5ColumnwdmDelayCompLinkWantedDelayCompensationread-writecurrentThe wanted delay compensation in nanoseconds. Note, this value is only used by the system when automatic delay compensation mode is disabled.
1.3.6.1.4.1.8708.2.4.2.14NodewdmMeanChannelPowerControlGlobalList
1.3.6.1.4.1.8708.2.4.2.14.1TablewdmMeanChannelPowerControlGlobalTablenot-accessiblecurrentBogus table to hold one entry with a dialog attribute to create entries in another table.
1.3.6.1.4.1.8708.2.4.2.14.1.1RowwdmMeanChannelPowerControlGlobalEntrynot-accessiblecurrentA list of links where the channel power will be adjusted
1.3.6.1.4.1.8708.2.4.2.14.1.1.1ColumnwdmMeanChannelPowerControlGlobalIndexread-onlycurrentAn index assigned to each entry. The index contains information about subrack, slot and port for controlled channel.
1.3.6.1.4.1.8708.2.4.2.14.1.1.2ColumnwdmMeanChannelPowerControlGlobalNameread-onlycurrentThe management name of this bogus entry, that only exists to create other entries. 'bogus'
1.3.6.1.4.1.8708.2.4.2.14.1.1.3ColumnwdmMeanChannelPowerControlGlobalEntryCreateread-onlycurrentCreates a wdmMeanChannelPowerControl entry in another table
1.3.6.1.4.1.8708.2.4.2.15NodewdmMeanChannelPowerControlList
1.3.6.1.4.1.8708.2.4.2.15.1TablewdmMeanChannelPowerControlTablenot-accessiblecurrentThe list of local links to balance channel power on
1.3.6.1.4.1.8708.2.4.2.15.1.1RowwdmMeanChannelPowerControlEntrynot-accessiblecurrentA list of links where the channel power will be adjusted
1.3.6.1.4.1.8708.2.4.2.15.1.1.1ColumnwdmMeanChannelPowerControlIndexread-onlycurrentAn index assigned to each entry. The index contains information about subrack, slot and port for controlled channel.
1.3.6.1.4.1.8708.2.4.2.15.1.1.2ColumnwdmMeanChannelPowerControlNameread-onlycurrentThe management name of the local link adjustment entry 'meanChannelPowerControl:1:2:1' (meanChannelPowerControl[oa subrack]:[oa slot]:[oa port]).
1.3.6.1.4.1.8708.2.4.2.15.1.1.3ColumnwdmMeanChannelPowerControlDescrread-writecurrentUser configurable label.
1.3.6.1.4.1.8708.2.4.2.15.1.1.4ColumnwdmMeanChannelPowerControlOcmSubrackread-createcurrentThe subrack number of the ocm reading the oa monitor port.
1.3.6.1.4.1.8708.2.4.2.15.1.1.5ColumnwdmMeanChannelPowerControlOcmSlotread-createcurrentThe slot number of the ocm reading the oa monitor port. channel is attenuated.
1.3.6.1.4.1.8708.2.4.2.15.1.1.6ColumnwdmMeanChannelPowerControlOcmPortread-createcurrentThe monitor port of this local link adjustment loop.
1.3.6.1.4.1.8708.2.4.2.15.1.1.7ColumnwdmMeanChannelPowerControlOaSubrackread-onlycurrentThe subrack number of the oa that is being controlled by this local link adjustment entry
1.3.6.1.4.1.8708.2.4.2.15.1.1.8ColumnwdmMeanChannelPowerControlOaSlotread-onlycurrentThe slot number of the oa that is being controlled by this local link adjustment entry
1.3.6.1.4.1.8708.2.4.2.15.1.1.9ColumnwdmMeanChannelPowerControlOaPortread-onlycurrentThe port number of the oa that is being controlled by this local link adjustment entry
1.3.6.1.4.1.8708.2.4.2.15.1.1.10ColumnwdmMeanChannelPowerControlMonitorNameread-onlycurrentThe management name of the monitor port, for example 'ocm:1:2:1-A' ([monitortype]:[subrack]:[slot]:[port]).
1.3.6.1.4.1.8708.2.4.2.15.1.1.11ColumnwdmMeanChannelPowerControlAdminStatusread-writecurrentThe administrative state for the local link adjustment entry. down - The link adjustment is disabled service - The link is adjusting the channel power but alar…
1.3.6.1.4.1.8708.2.4.2.15.1.1.12ColumnwdmMeanChannelPowerControlOperStatusread-onlycurrentThe operational state for the control group down - The control group cannot operate due to missing resources or other complications up - The control group is a…
1.3.6.1.4.1.8708.2.4.2.15.1.1.13ColumnwdmMeanChannelPowerControlStartRegulationread-onlycurrentStarts a regulation manually
1.3.6.1.4.1.8708.2.4.2.15.1.1.14ColumnwdmMeanChannelPowerControlRegulationRangeread-writecurrentAn offset below the wanted output power at which the 'Current Power Out Of Range' alarm shall be raised. When the current output power is so far below the want…
1.3.6.1.4.1.8708.2.4.2.15.1.1.15ColumnwdmMeanChannelPowerControlLatestRegulationread-onlycurrentThe time when the link was last regulated.
1.3.6.1.4.1.8708.2.4.2.15.1.1.16ColumnwdmMeanChannelPowerControlLatestChangeread-onlycurrentThe time when the link was latest adjusted
1.3.6.1.4.1.8708.2.4.2.15.1.1.17ColumnwdmMeanChannelPowerControlMonitorOffsetCalibrationFailedread-onlycurrentAlarm raised when calibration of the OCM port fails. A: calibration of OCM port failed D: Normal mode
1.3.6.1.4.1.8708.2.4.2.15.1.1.18ColumnwdmMeanChannelPowerControlRegulationStateread-onlycurrentThe regulation status for the link starting - the local link adjustment loop is reading the power from the monitor regulating - the local link adjustment loop …
1.3.6.1.4.1.8708.2.4.2.15.1.1.19ColumnwdmMeanChannelPowerControlTimeToNextRegulationread-onlycurrentThe remaining time (in minutes) to next regulation.
1.3.6.1.4.1.8708.2.4.2.15.1.1.20ColumnwdmMeanChannelPowerControlWantedChannelPowerread-writecurrentThe wanted output power.
1.3.6.1.4.1.8708.2.4.2.15.1.1.21ColumnwdmMeanChannelPowerControlCurrentChannelPowerread-onlycurrentThe actual output power.
1.3.6.1.4.1.8708.2.4.2.15.1.1.22ColumnwdmMeanChannelPowerControlCurrentGainread-onlycurrentOA signal gain set by the local link adjustment loop
1.3.6.1.4.1.8708.2.4.2.15.1.1.23ColumnwdmMeanChannelPowerControlTotalChannelOutputPowerread-onlycurrentTotal channel output power
1.3.6.1.4.1.8708.2.4.2.15.1.1.24ColumnwdmMeanChannelPowerControlNumberOfChannelsread-onlycurrentNumber of channels read from OCM
1.3.6.1.4.1.8708.2.4.2.15.1.1.25ColumnwdmMeanChannelPowerControlAbsolutePowerOffsetread-onlycurrentAbsolute power offset
1.3.6.1.4.1.8708.2.4.2.15.1.1.26ColumnwdmMeanChannelPowerControlRemainingPowerOffsetread-onlycurrentRemaining power offset
1.3.6.1.4.1.8708.2.4.2.15.1.1.27ColumnwdmMeanChannelPowerControlMonitorOffsetTooLargeread-onlycurrentAlarm raised when the OCM monitor port offset is too large A: OCM port offset too large D: Normal mode
1.3.6.1.4.1.8708.2.4.2.15.1.1.28ColumnwdmMeanChannelPowerControlChannelPowerOutOfRangeread-onlycurrentAlarm raised when the incomming channelpower is too high or too low to regulate to the wanted mean channel power A: channel power out of range D: Normal mode
1.3.6.1.4.1.8708.2.4.2.15.1.1.29ColumnwdmMeanChannelPowerControlRegulationIntervalread-writecurrentMinimum time between two regulations, a random wait time of up to 15 seconds is added to this value when calculating when the next regulation should occurr.
1.3.6.1.4.1.8708.2.4.2.15.1.1.30ColumnwdmMeanChannelPowerControlAmplifierOutputPortread-onlycurrentThe management name of the OA port controlled by this control loop
1.3.6.1.4.1.8708.2.4.2.15.1.1.31ColumnwdmMeanChannelPowerControlLatestAmplifierRxPowerread-onlycurrentThe latest amplifier input power
1.3.6.1.4.1.8708.2.4.2.15.1.1.32ColumnwdmMeanChannelPowerControlLatestAmplifierTxPowerread-onlycurrentThe latest amplifier output power
1.3.6.1.4.1.8708.2.4.2.15.1.1.33ColumnwdmMeanChannelPowerControlLocalIdread-onlycurrentStore the local ID since it will be needed when reading backup