LUMINOUS-TOPOLOGY-MIB
38 objects
The Luminous Topology MIB contains information related to the Luminous Ring Topology.
Imported Objects
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4614 | Nodeluminous | |||
| 1.3.6.1.4.1.4614.1 | NodelumADM | |||
| 1.3.6.1.4.1.4614.1.3 | IdentitylumTopologyMIB | The Luminous Topology MIB contains information related to the Luminous Ring Topology. | ||
| 1.3.6.1.4.1.4614.1.3.1 | NodelumRingCommands | |||
| 1.3.6.1.4.1.4614.1.3.1.1 | NodelumTopoDiscoveryGroup | |||
| 1.3.6.1.4.1.4614.1.3.1.1.1 | ScalarlumTopoDiscoveryRetries | read-write | current | Initially set to 3. |
| 1.3.6.1.4.1.4614.1.3.1.1.2 | ScalarlumTopoNeighborInfoTimer | read-write | current | The Neighbor Information Timer sets the amount of time between periodic sends of the neighbor information message from each node on each egress link. |
| 1.3.6.1.4.1.4614.1.3.1.1.3 | ScalarlumTopoDiscoveryConvergenceTimer | read-write | current | The topology convergence timer sets the amount of time during which no messages indicating a change of topology have been received before the topology can be c… |
| 1.3.6.1.4.1.4614.1.3.1.1.4 | ScalarlumTopoDiscoveryTimer | read-write | current | The topology discovery timer sets the total amount of time until the topology convergence timer is checked. If the topology convergence timer has not reached t… |
| 1.3.6.1.4.1.4614.1.3.1.1.5 | ScalarlumTopoDiscovery | read-write | current | Setting this field to doDiscover(2) has the effect of starting the Ring Topology Discovery. The Retries and Timers in the fields above in order for them to hav… |
| 1.3.6.1.4.1.4614.1.3.1.1.6 | ScalarlumTopoDiscoveryFailedNode | read-only | current | The node that causes the the Topology Discovery failure. Valid only if lumTopoDiscovery is discoveryFailed(4). |
| 1.3.6.1.4.1.4614.1.3.1.2 | ScalarlumRingCommand | read-write | current | Setting this field to clearAll(2) has the effect of clearing all lumLinkAdminStatus (setting it to 0). This clears all externally initiated commands. Setting t… |
| 1.3.6.1.4.1.4614.1.3.1.3 | ScalarlumRingRevertiveMode | read-write | current | Setting this field to revertiveMode(1), has the effect of switching from non-revertive mode to revertive mode for the whole ring. Likewise setting this field t… |
| 1.3.6.1.4.1.4614.1.3.1.4 | ScalarlumProtectionSwitchHysteresis | read-only | current | Hysteresis factor. This factor prevents ping-ponging in protection switching when a link's measured status is varying with time. Valid values are between 5 and… |
| 1.3.6.1.4.1.4614.1.3.2 | TablelumProtectionSwitchingTable | not-accessible | current | The Luminous Protection Switching Table. |
| 1.3.6.1.4.1.4614.1.3.2.1 | RowlumProtectionSwitchingEntry | not-accessible | current | Each entry represents connection information of current node to other nodes on the ring. |
| 1.3.6.1.4.1.4614.1.3.2.1.1 | ColumnlumProtDestinationIP | read-only | current | This is the address of the destination node. |
| 1.3.6.1.4.1.4614.1.3.2.1.2 | ColumnlumProtMeasDestCost | read-only | current | This is the cumulative measured cost per destination for each egress interface of a node. |
| 1.3.6.1.4.1.4614.1.3.2.1.3 | ColumnlumProtNonRevDestCost | read-only | current | This is the non-revertive cost per destination for each egress interface of a node. This is used only for non-revertive protection switching. |
| 1.3.6.1.4.1.4614.1.3.2.1.4 | ColumnlumProtMeasPrefDir | read-only | current | This is the interface number corresponding to the preferred direction for data from this node to lumProtDestinationIP based on measured costs. |
| 1.3.6.1.4.1.4614.1.3.2.1.5 | ColumnlumProtNonRevPrefDir | read-only | current | This is the interface number corresponding to the preferred direction for data from this node to lumProtDestinationIP based on non-revertive costs. |
| 1.3.6.1.4.1.4614.1.3.3 | TablelumRingLinkTable | not-accessible | current | The Luminous Ring Topology Table. |
| 1.3.6.1.4.1.4614.1.3.3.1 | RowlumRingLinkEntry | not-accessible | current | Each entry represents connection information of every ingress to every ingress node on the ring |
| 1.3.6.1.4.1.4614.1.3.3.1.1 | ColumnlumLinkIngressNodeIP | read-only | current | This is the address of the ingress link node. |
| 1.3.6.1.4.1.4614.1.3.3.1.2 | ColumnlumLinkEgressNodeIP | read-only | current | This is the address of the egress link node. |
| 1.3.6.1.4.1.4614.1.3.3.1.3 | ColumnlumLinkIngressInterface | read-only | current | This is the interface number (slot number) of the ring transition card connected to the link at the ingress node. |
| 1.3.6.1.4.1.4614.1.3.3.1.4 | ColumnlumLinkEgressInterface | read-only | current | This is the interface number (slot number) of the ring transition card connected to the link at the egress node. |
| 1.3.6.1.4.1.4614.1.3.3.1.5 | ColumnlumLinkOperStatus | read-only | current | This is the latest measured operational status of the link. It is reported from the ring applications to the shelf manager to the NMS. Currently, traffic conge… |
| 1.3.6.1.4.1.4614.1.3.3.1.6 | ColumnlumLinkNonRevStatus | read-only | current | This is the minimum value of link operational status reported since the last Revert-To-Measured-Oper-Status command from the NMS. This field is used only for n… |
| 1.3.6.1.4.1.4614.1.3.3.1.7 | ColumnlumLinkAdminStatus | read-write | current | This is the latest administrative status of the link set by the operator. It is reported to the ring applications via the shelf manager. There are several opti… |
| 1.3.6.1.4.1.4614.1.3.3.1.8 | ColumnlumLinkSyncOperStatus | read-only | current | This is a single indicator of whether a link is an active part of a synchronization path. This value is set by the ring itself and reported to NMS. |
| 1.3.6.1.4.1.4614.1.3.3.1.9 | ColumnlumLinkSyncNonRevStatus | read-only | current | . |
| 1.3.6.1.4.1.4614.1.3.3.1.10 | ColumnlumLinkSyncAdminStatus | read-write | current | This is the latest administrative status of the link for synchronization set by the operator. It is to be set by NMS. |
| 1.3.6.1.4.1.4614.1.3.4 | TablelumRingThresholdTable | not-accessible | current | The Luminous Ring Threshold Table. |
| 1.3.6.1.4.1.4614.1.3.4.1 | RowlumRingThresholdEntry | not-accessible | current | Each entry represents threshold values per threshold window on the ring. |
| 1.3.6.1.4.1.4614.1.3.4.1.1 | ColumnlumRingThresholdWindow | read-write | current | This is the threshold window size. |
| 1.3.6.1.4.1.4614.1.3.4.1.2 | ColumnlumRingThresholdValue | read-write | current | This is the threshold value for this window. |
| 1.3.6.1.4.1.4614.1.3.4.1.3 | ColumnlumRingThresholdStatus | read-write | current | This object is used to create and delete rows in the Threshold Table. |