MERIDIAN2-MIB
226 objects
EndRun Technologies Enterprise MIB
Imported Objects
| SNMPv2-SMI | Counter32 enterprises MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.13827 | NodeendRunTechnologiesMIB | |||
| 1.3.6.1.4.1.13827.0 | IdentityendRunTechnologies | EndRun Technologies Enterprise MIB | ||
| 1.3.6.1.4.1.13827.14 | Nodemeridian2GPS | |||
| 1.3.6.1.4.1.13827.14.1 | Nodegntp | |||
| 1.3.6.1.4.1.13827.14.1.0 | Nodegntptrap | |||
| 1.3.6.1.4.1.13827.14.1.0.1 | NotificationgntpTrapLeapIndBitsChange | current | A gntpTrapNTPLeapIndBitsChange trap signifies that the value of the leap indicator bits contained in the NTP reply packets sent by the time server has changed.… | |
| 1.3.6.1.4.1.13827.14.1.0.2 | NotificationgntpTrapStratumChange | current | A gntpTrapStratumChange trap signifies that the value of the stratum field contained in the NTP reply packets sent by the time server has changed. The current … | |
| 1.3.6.1.4.1.13827.14.1.1 | ScalargntpTimeSinceRst | read-only | current | Time since NTP daemon restart. |
| 1.3.6.1.4.1.13827.14.1.2 | ScalargntpIRQsHandled | read-only | current | Total number of Interrupts handled by the NTP daemon. |
| 1.3.6.1.4.1.13827.14.1.3 | ScalargntpRxPkts | read-only | current | Total number of NTP request packets received by the NTP daemon. |
| 1.3.6.1.4.1.13827.14.1.4 | ScalargntpRxPktsByIRQ | read-only | current | Total number of NTP request packets received via IRQ by the NTP daemon. |
| 1.3.6.1.4.1.13827.14.1.5 | ScalargntpTxPkts | read-only | current | Total number of NTP reply packets transmitted by the NTP daemon. |
| 1.3.6.1.4.1.13827.14.1.6 | ScalargntpSentPktsPerSecond | read-only | current | NTP reply packets sent per second by the NTP daemon. |
| 1.3.6.1.4.1.13827.14.1.7 | ScalargntpUnSentPkts | read-only | current | Total number of NTP reply packets unsent by the NTP daemon. |
| 1.3.6.1.4.1.13827.14.1.8 | ScalargntpIgnoredPkts | read-only | current | Total number of NTP request packets ignored by the NTP daemon. |
| 1.3.6.1.4.1.13827.14.1.9 | ScalargntpDroppedPkts | read-only | current | Total number of NTP request packets dropped by the NTP daemon. |
| 1.3.6.1.4.1.13827.14.1.10 | ScalargntpAuthFail | read-only | current | Total number of authentication failures detected by the NTP daemon. |
| 1.3.6.1.4.1.13827.14.1.11 | ScalargntpTimeFigureOfMerit | read-only | current | The Time Figure of Merit (TFOM) value ranges from 3 to 9 and indicates the current estimate of the worst case time error. It is a logarithmic scale, with each … |
| 1.3.6.1.4.1.13827.14.1.12 | ScalargntpLeapIndBits | read-only | current | This is a status code indicating: normal operation, a leap second to be inserted in the last minute of the current day, a leap second to be deleted in the last… |
| 1.3.6.1.4.1.13827.14.1.13 | ScalargntpSyncSource | read-only | current | This is an ASCII string identifying the synchronization source for this NTP server. It is one of GPS, an IP address of a stratum 1 server, or NONE. If it is NO… |
| 1.3.6.1.4.1.13827.14.1.14 | ScalargntpOffsetToGPSReference | read-only | current | This is an ASCII string containing the floating value of the current offset in units of seconds of the NTP server CPU clock to the GPS reference time. Positive… |
| 1.3.6.1.4.1.13827.14.1.15 | ScalargntpStratum | read-only | current | This is an integer showing the current stratum level being reported by the NTP daemon in its reply packets to clients. If it is 1, then the server is fully syn… |
| 1.3.6.1.4.1.13827.14.1.16 | ScalargntpVersion | read-only | current | This is an ASCII string showing the system root file system firmware version. |
| 1.3.6.1.4.1.13827.14.1.17 | ScalargntpKernelVersion | read-only | current | This is an ASCII string showing the system Linux kernel firmware version. |
| 1.3.6.1.4.1.13827.14.1.18 | ScalargntpOscType | read-only | current | This is an ASCII string showing the installed oscillator type. It is one of TCXO, MS-OCXO, HS-OCXO, US-OCXO, Rubidium, HS-Rubidium, US-Rubidium, Cesium or US-C… |
| 1.3.6.1.4.1.13827.14.1.19 | ScalargntpTimeMode | read-only | current | This is an ASCII string showing the time mode of operation for any optional IRIG timecode outputs or the optional front panel vacuum fluorescent display. It DO… |
| 1.3.6.1.4.1.13827.14.1.20 | ScalargntpLocalOffset | read-only | current | This value is the local time offset configured for any optional IRIG timecode outputs or the optional front panel vacuum fluorescent display. It is only pertin… |
| 1.3.6.1.4.1.13827.14.1.21 | ScalargntpDSTStartMonth | read-only | current | This value is the month that Daylight Savings Time begins. It affects the local time operation of any optional IRIG timecode outputs or the optional front pane… |
| 1.3.6.1.4.1.13827.14.1.22 | ScalargntpDSTStartSunday | read-only | current | This value is the Sunday of the month that Daylight Savings Time begins. It affects the local time operation of any optional IRIG timecode outputs or the optio… |
| 1.3.6.1.4.1.13827.14.1.23 | ScalargntpDSTStartHour | read-only | current | This value is the hour that Daylight Savings Time begins. It affects the local time operation of any optional IRIG timecode outputs or the optional front panel… |
| 1.3.6.1.4.1.13827.14.1.24 | ScalargntpDSTStopMonth | read-only | current | This value is the month that Daylight Savings Time ends. It affects the local time operation of any optional IRIG timecode outputs or the optional front panel … |
| 1.3.6.1.4.1.13827.14.1.25 | ScalargntpDSTStopSunday | read-only | current | This value is the Sunday of the month that Daylight Savings Time ends. It affects the local time operation of any optional IRIG timecode outputs or the optiona… |
| 1.3.6.1.4.1.13827.14.1.26 | ScalargntpDSTStopHour | read-only | current | This value is the hour that Daylight Savings Time ends. It affects the local time operation of any optional IRIG timecode outputs or the optional front panel v… |
| 1.3.6.1.4.1.13827.14.1.27 | ScalargntpCPUDieTemperature | read-only | current | ASCII string representing the current CPU internal die temperature, in units of Celsius degrees in floating point notation. |
| 1.3.6.1.4.1.13827.14.1.28 | ScalargntpCPUFreeMemory | read-only | current | This value is the CPU Free Memory in kiloBytes. |
| 1.3.6.1.4.1.13827.14.1.29 | ScalargntpCPULoadAveragePerCent | read-only | current | This value is the CPU Load Average as percent of total load. |
| 1.3.6.1.4.1.13827.14.2 | Nodegps | |||
| 1.3.6.1.4.1.13827.14.2.0 | Nodegpstrap | |||
| 1.3.6.1.4.1.13827.14.2.0.1 | NotificationgpsTrapFaultStatusChange | current | A gpsTrapFaultStatusChange trap signifies that the value of the least significant two nibbles of th fault status word reported by the GPS sub-system has change… | |
| 1.3.6.1.4.1.13827.14.2.0.2 | NotificationgpsTrapFault2StatusChange | current | A gpsTrapFault2StatusChange trap signifies that the value of the most significant two nibbles of the fault status word reported by the GPS sub-system has chang… | |
| 1.3.6.1.4.1.13827.14.2.0.3 | NotificationgpsTrapTimeFigureOfMeritChange | current | A gpsTrapTimeFigureOfMeritChange trap signifies that the value of the TFOM reported by the GPS sub-system has changed. The current value is contained in the in… | |
| 1.3.6.1.4.1.13827.14.2.1 | ScalargpsFaultStatus | read-only | current | This is a bit string contained in one character representing the least significant two nibbles of the GPS fault status word. Unfortunately, SNMP numbers the bi… |
| 1.3.6.1.4.1.13827.14.2.2 | ScalargpsFault2Status | read-only | current | This is a bit string contained in one character representing the most significant two nibbles of the GPS fault status word. Unfortunately, SNMP numbers the bit… |
| 1.3.6.1.4.1.13827.14.2.3 | ScalargpsReceiverFaultNibble0Status | read-only | current | This is a bit string contained in one character representing the least significant nibble of the GPS receiver fault status word. Unfortunately, SNMP numbers th… |
| 1.3.6.1.4.1.13827.14.2.4 | ScalargpsReceiverFaultNibble1Status | read-only | current | This is a bit string contained in one character representing the second nibble of the GPS receiver fault status word. Unfortunately, SNMP numbers the bits in t… |
| 1.3.6.1.4.1.13827.14.2.5 | ScalargpsReceiverFaultNibble2Status | read-only | current | This is a bit string contained in one character representing the third nibble of the GPS receiver fault status word. Unfortunately, SNMP numbers the bits in th… |
| 1.3.6.1.4.1.13827.14.2.6 | ScalargpsReceiverFaultNibble3Status | read-only | current | This is a bit string contained in one character representing the most significant nibble of the GPS fault status word. Unfortunately, SNMP numbers the bits in … |
| 1.3.6.1.4.1.13827.14.2.7 | ScalargpsTimeFigureOfMerit | read-only | current | The Time Figure of Merit (TFOM) value ranges from 3 to 9 and indicates the current estimate of the worst case time error. It is a logarithmic scale, with each … |
| 1.3.6.1.4.1.13827.14.2.8 | ScalargpsSigProcState | read-only | current | Current GPS signal processor state. One of WRM, ACQ, LKG or LKD with WRM indicating either an OCXO or Rubidium is warming up, ACQ indicating the acquisition st… |
| 1.3.6.1.4.1.13827.14.2.9 | ScalargpsReceiverSigProcState | read-only | current | Current GPS Receiver signal processor state. One of ACQ, DET, LKG, TKG or LKD with ACQ indicating the acquisition state and LKD the fully locked on state. |
| 1.3.6.1.4.1.13827.14.2.10 | ScalargpsNumTrackSats | read-only | current | Current number of GPS satellites being tracked. |
| 1.3.6.1.4.1.13827.14.2.11 | ScalargpsAGC | read-only | current | Current 8 bit, Automatic Gain Control (AGC) DAC value. Typical values are around 150, but antenna cable length, preamplifiers and signal splitters will affect … |
| 1.3.6.1.4.1.13827.14.2.12 | ScalargpsAvgCarrierToNoiseRatiodB | read-only | current | ASCII string representing the current average carrier to noise ratio of all tracked satellites, in units of dB. Values less than 35 indicate weak signal condit… |
| 1.3.6.1.4.1.13827.14.2.13 | ScalargpsChannelTrkStat1 | read-only | current | Channel 1 tracking status of the GPS receiver. Information includes the Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees and the Ca… |
| 1.3.6.1.4.1.13827.14.2.14 | ScalargpsChannelTrkStat2 | read-only | current | Channel 2 tracking status of the GPS receiver. Information includes the Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees and the Ca… |
| 1.3.6.1.4.1.13827.14.2.15 | ScalargpsChannelTrkStat3 | read-only | current | Channel 3 tracking status of the GPS receiver. Information includes the Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees and the Ca… |
| 1.3.6.1.4.1.13827.14.2.16 | ScalargpsChannelTrkStat4 | read-only | current | Channel 4 tracking status of the GPS receiver. Information includes the Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees and the Ca… |
| 1.3.6.1.4.1.13827.14.2.17 | ScalargpsChannelTrkStat5 | read-only | current | Channel 5 tracking status of the GPS receiver. Information includes the Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees and the Ca… |
| 1.3.6.1.4.1.13827.14.2.18 | ScalargpsChannelTrkStat6 | read-only | current | Channel 6 tracking status of the GPS receiver. Information includes the Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees and the Ca… |
| 1.3.6.1.4.1.13827.14.2.19 | ScalargpsChannelTrkStat7 | read-only | current | Channel 7 tracking status of the GPS receiver. Information includes the Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees and the Ca… |
| 1.3.6.1.4.1.13827.14.2.20 | ScalargpsChannelTrkStat8 | read-only | current | Channel 8 tracking status of the GPS receiver. Information includes the Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees and the Ca… |
| 1.3.6.1.4.1.13827.14.2.21 | ScalargpsChannelTrkStat9 | read-only | current | Channel 9 tracking status of the GPS receiver. Information includes the Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees and the Ca… |
| 1.3.6.1.4.1.13827.14.2.22 | ScalargpsChannelTrkStat10 | read-only | current | Channel 10 tracking status of the GPS receiver. Information includes the Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees and the C… |
| 1.3.6.1.4.1.13827.14.2.23 | ScalargpsChannelTrkStat11 | read-only | current | Channel 11 tracking status of the GPS receiver. Information includes the Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees and the C… |
| 1.3.6.1.4.1.13827.14.2.24 | ScalargpsChannelTrkStat12 | read-only | current | Channel 12 tracking status of the GPS receiver. Information includes the Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees and the C… |
| 1.3.6.1.4.1.13827.14.2.25 | ScalargpsLastPositionFix | read-only | current | WGS-84 latitude, longitude and height above the reference ellipsoid of the GPS antenna. Ellipsoid height may deviate from local Mean Sea Level by as much as 10… |
| 1.3.6.1.4.1.13827.14.2.26 | ScalargpsReferencePosition | read-only | current | WGS-84 latitude, longitude and height above the reference ellipsoid of the GPS antenna. Ellipsoid height may deviate from local Mean Sea Level by as much as 10… |
| 1.3.6.1.4.1.13827.14.2.27 | ScalargpsRefPosSource | read-only | current | ASCII string indicating the source of the GPS antenna reference position. It is one of: USR (user-supplied), AVG (automatically determined by averaging thousan… |
| 1.3.6.1.4.1.13827.14.2.28 | ScalargpsCurrentLeapSeconds | read-only | current | This value is the current difference in seconds between GPS time and UTC time. GPS time is ahead of UTC time by this amount. |
| 1.3.6.1.4.1.13827.14.2.29 | ScalargpsFutureLeapSeconds | read-only | current | This value is the future difference in seconds between GPS time and UTC time. Leap seconds may be inserted or deleted from the UTC timescale twice during the y… |
| 1.3.6.1.4.1.13827.14.2.30 | ScalargpsAlmanacLS | read-only | current | This value, LS is the current difference in seconds between GPS time and UTC time as contained in the GPS Almanac UTC data. GPS time is ahead of UTC time by th… |
| 1.3.6.1.4.1.13827.14.2.31 | ScalargpsAlmanacLSF | read-only | current | This value, LSF is the future difference in seconds between GPS time and UTC time as contained in the GPS Almanac UTC data. Leap seconds may be inserted or del… |
| 1.3.6.1.4.1.13827.14.2.32 | ScalargpsAlmanacUTCWNlsf | read-only | current | This value, WN_lsf is the GPS Week Number during which the UTC leap second offset to GPS time will transition to the Leap Second Future value. The GPS week num… |
| 1.3.6.1.4.1.13827.14.2.33 | ScalargpsAlmanacUTCDN | read-only | current | This value, DN is the Day Number of the week in which the UTC leap second offset to GPS time will transition to the Leap Second Future value. The GPS day numbe… |
| 1.3.6.1.4.1.13827.14.2.34 | ScalargpsAlmanacA0 | read-only | current | ASCII string representing the value of the a0 coefficient of the linear fit of the UTC offset to GPS time. a0 is the constant term in the equation, in units of… |
| 1.3.6.1.4.1.13827.14.2.35 | ScalargpsAlmanacA1 | read-only | current | ASCII string representing the value of the a1 coefficient of the linear fit of the UTC offset to GPS time. a1 is the slope term in the equation, in units of se… |
| 1.3.6.1.4.1.13827.14.2.36 | ScalargpsAlmanacUTCWNt | read-only | current | This value, WN_t is the GPS Week Number during which the reference time for the linear fit equation defined by a0 and a1 occurs. It is used along with t_ot to … |
| 1.3.6.1.4.1.13827.14.2.37 | ScalargpsAlmanacUTCtot | read-only | current | This value, t_ot is the second of the GPS week WN_t at which time the linear fit equation defined by a0 and a1 will evaluate to a0. The seconds range from 0 at… |
| 1.3.6.1.4.1.13827.14.2.38 | ScalargpsGPSminusUTCOffsetPicoSecs | read-only | current | This value, (GPS - UTC) is the current sub-seconds offset of the GPS timescale to the UTC timescale, computed using the received GPS almanac parameters (WN_t, … |
| 1.3.6.1.4.1.13827.14.2.39 | ScalargpsSubsystemVersion | read-only | current | ASCII string showing the GPS subsystem firmware and FPGA versions. |
| 1.3.6.1.4.1.13827.14.2.40 | ScalargpsReceiverVersion | read-only | current | ASCII string showing the GPS receiver firmware and FPGA versions. |
| 1.3.6.1.4.1.13827.14.2.41 | ScalargpsDynamicMode | read-only | current | The GPS dynamic mode is either on or off. When it is off, the server is assumed to be in a static installation. In this case, single satellite mode of operatio… |
| 1.3.6.1.4.1.13827.14.2.42 | ScalargpsCalibrationDelayNanoSecs | read-only | current | Signed integer representing the current calibration delay being applied to the timing outputs, in units of nanoseconds. Positive values indicate that the timin… |
| 1.3.6.1.4.1.13827.14.2.43 | ScalargpsCoastDuration | read-only | current | Unsigned integer representing the current elapsed time since the unit lost GPS reception in units of seconds. |
| 1.3.6.1.4.1.13827.14.2.44 | ScalargpsEstimatedTimeError | read-only | current | ASCII string representing the magnitude of the estimated time error since the unit lost GPS reception, in units of seconds in scientific floating point notatio… |
| 1.3.6.1.4.1.13827.14.2.45 | ScalargpsMeasuredTimeError | read-only | current | ASCII string representing the measured time error of the timing outputs relative to GPS, in units of seconds in scientific floating point notation. While coast… |
| 1.3.6.1.4.1.13827.14.2.46 | ScalargpsMeasurementTimeDeviation | read-only | current | ASCII string representing the time deviation (TDEV) of the GPS measurement data, in units of seconds in scientific floating point notation. While coasting, the… |
| 1.3.6.1.4.1.13827.14.2.47 | ScalargpsOSCDAC | read-only | current | Current 20 bit, System Voltage Controlled Oscillator DAC value. Typical range is 320000 to 640000, where more positive numbers have the effect of raising the o… |
| 1.3.6.1.4.1.13827.14.2.48 | ScalargpsMeasuredOscillatorAgeing | read-only | current | ASCII string representing the ageing rate per day of the installed osc- illator, in scientific floating point notation. It is computed via linear regression an… |
| 1.3.6.1.4.1.13827.14.2.49 | ScalargpsControlLoopTimeConstant | read-only | current | ASCII string representing the current equivalent averaging time of the oscillator control loop, in units of seconds in floating point notation. The value is dy… |
| 1.3.6.1.4.1.13827.14.2.50 | ScalargpsInternalTemperature | read-only | current | ASCII string representing the current internal chassis temperature, in units of Celsius degrees in floating point notation. A value is only available when the … |
| 1.3.6.1.4.1.13827.14.2.51 | ScalargpsAntennaFaultMask | read-only | current | The GPS antenna fault mask is either on or off. When it is off, the server will set the Antenna Fault Bit in the Fault Status Byte if an improper antenna imped… |
| 1.3.6.1.4.1.13827.14.2.52 | ScalargpsSignalLossFaultMask | read-only | current | The GPS signal loss fault mask is either on or off. When it is off, the server will set the Signal Loss Fault Bit in the Fault Status Byte one hour after TFOM … |
| 1.3.6.1.4.1.13827.14.2.53 | ScalargpsPrimaryPowerFaultAlarmMask | read-only | current | The Primary Power input fault alarm mask is either on or off. When it is on, the server will not assert an Alarm condition on a fault in the Primary Power supp… |
| 1.3.6.1.4.1.13827.14.2.54 | ScalargpsSecondaryPowerFaultAlarmMask | read-only | current | The Secondary Power input fault alarm mask is either on or off. When it is on, the server will not assert an Alarm condition on a fault in the Secondary Power … |
| 1.3.6.1.4.1.13827.14.2.55 | ScalargpsTimeFigureOfMeritFaultLevel | read-only | current | The Time Figure of Merit (TFOM) Fault Level ranges from 4 to 9 and indicates the current threshold TFOM value for setting the Signal Loss Bit in the Fault Stat… |
| 1.3.6.1.4.1.13827.14.2.56 | ScalargpsInhibitOutputsMode | read-only | current | The Inhibit Outputs mode is either on or off. When it is on, the timebase will inhibit the timing signal outputs prior to initial lock to the GPS receiver. Whe… |
| 1.3.6.1.4.1.13827.14.2.57 | ScalargpsAlmanacIonoAlpha0 | read-only | current | ASCII string representing the current GPS broadcast ionospheric model coefficient alpha0 in floating point notation. |
| 1.3.6.1.4.1.13827.14.2.58 | ScalargpsAlmanacIonoAlpha1 | read-only | current | ASCII string representing the current GPS broadcast ionospheric model coefficient alpha1 in floating point notation. |
| 1.3.6.1.4.1.13827.14.2.59 | ScalargpsAlmanacIonoAlpha2 | read-only | current | ASCII string representing the current GPS broadcast ionospheric model coefficient alpha2 in floating point notation. |
| 1.3.6.1.4.1.13827.14.2.60 | ScalargpsAlmanacIonoAlpha3 | read-only | current | ASCII string representing the current GPS broadcast ionospheric model coefficient alpha3 in floating point notation. |
| 1.3.6.1.4.1.13827.14.2.61 | ScalargpsAlmanacIonoBeta0 | read-only | current | ASCII string representing the current GPS broadcast ionospheric model coefficient beta0 in floating point notation. |
| 1.3.6.1.4.1.13827.14.2.62 | ScalargpsAlmanacIonoBeta1 | read-only | current | ASCII string representing the current GPS broadcast ionospheric model coefficient beta1 in floating point notation. |
| 1.3.6.1.4.1.13827.14.2.63 | ScalargpsAlmanacIonoBeta2 | read-only | current | ASCII string representing the current GPS broadcast ionospheric model coefficient beta2 in floating point notation. |
| 1.3.6.1.4.1.13827.14.2.64 | ScalargpsAlmanacIonoBeta3 | read-only | current | ASCII string representing the current GPS broadcast ionospheric model coefficient beta3 in floating point notation. |
| 1.3.6.1.4.1.13827.14.2.65 | ScalargpsAlmanacIonoWNa | read-only | current | This value, WN_a is the GPS Week Number of the almanac containing the current set of Ionospheric model coefficients. For more detailed information, consult the… |
| 1.3.6.1.4.1.13827.14.2.66 | ScalargpsAlmanacIonotoa | read-only | current | This value, t_oa is the second of the GPS week WN_a of the almanac containing the current set of Ionospheric model coefficients. For more detailed information,… |
| 1.3.6.1.4.1.13827.14.2.67 | ScalargpsRTICMode | read-only | current | This value maps to the operating mode of the optional Real-Time Ionospheric Correction algorithm, which when On, indicates that the Real-Time Ionospheric Corre… |
| 1.3.6.1.4.1.13827.14.2.68 | ScalargpsRTICValid | read-only | current | This value maps to the Validity state of the optional Real-Time Ionospheric Correction algorithm, which when True, indicates that the Real-Time Ionospheric Cor… |
| 1.3.6.1.4.1.13827.14.2.69 | ScalargpsKlobucharEnsembleDelay | read-only | current | ASCII string representing the current ensemble ionospheric delay as calculated using the standard GPS broadcast Klobuchar model, in units of nanoseconds, in fl… |
| 1.3.6.1.4.1.13827.14.2.70 | ScalargpsRTICEnsembleDelay | read-only | current | ASCII string representing the current ensemble ionospheric delay as calculated using the optional Real-Time Ionospheric Correction algorithm, in units of nanos… |
| 1.3.6.1.4.1.13827.14.2.71 | ScalargpsFaultNibble0Status | read-only | current | This is a bit string contained in one character representing the least significant nibbles of the GPS fault status word. Unfortunately, SNMP numbers the bits i… |
| 1.3.6.1.4.1.13827.14.2.72 | ScalargpsFaultNibble1Status | read-only | current | This is a bit string contained in one character representing the second nibble of the GPS fault status word. Unfortunately, SNMP numbers the bits in the revers… |
| 1.3.6.1.4.1.13827.14.2.73 | ScalargpsFaultNibble2Status | read-only | current | This is a bit string contained in one character representing the third nibble of the GPS fault status word. Unfortunately, SNMP numbers the bits in the reverse… |
| 1.3.6.1.4.1.13827.14.2.74 | ScalargpsFaultNibble3Status | read-only | current | This is a bit string contained in one character representing the most significant nibble of the GPS fault status word. Unfortunately, SNMP numbers the bits in … |
| 1.3.6.1.4.1.13827.14.2.75 | ScalargpsHP5071AOperNibble0Status | read-only | current | This is a bit string contained in one character representing the least significant nibble of the optional HP5071A Cesium Operation status word. Unfortunately, … |
| 1.3.6.1.4.1.13827.14.2.76 | ScalargpsHP5071AOperNibble2Status | read-only | current | This is a bit string contained in one character representing the third nibble of the optional HP5071A Cesium Operation status word. Unfortunately, SNMP numbers… |
| 1.3.6.1.4.1.13827.14.2.77 | ScalargpsHP5071AOperNibble3Status | read-only | current | This is a bit string contained in one character representing the most significant nibble of the optional HP5071A Cesium Operation status word. Unfortunately, S… |
| 1.3.6.1.4.1.13827.14.2.78 | ScalargpsHP5071AQuesNibble0Data | read-only | current | This is a bit string contained in one character representing the least significant nibble of the optional HP5071A Cesium Questionable Data word. Unfortunately,… |
| 1.3.6.1.4.1.13827.14.2.79 | ScalargpsHP5071AQuesNibble1Data | read-only | current | This is a bit string contained in one character representing the second nibble of the optional HP5071A Cesium Questionable Data word. Unfortunately, SNMP numbe… |
| 1.3.6.1.4.1.13827.14.2.80 | ScalargpsHP5071ACsBeamI | read-only | current | ASCII string showing the Cesium Beam current in uA. It may be NOT INSTALLED if the HP5071A Cesium oscillator option is not installed. |
| 1.3.6.1.4.1.13827.14.2.81 | ScalargpsHP5071ACFieldI | read-only | current | ASCII string showing the Cesium C-Field current in mA, typical range is 10.0 to 14.05 mA. It may be NOT INSTALLED if the HP5071A Cesium oscillator option is no… |
| 1.3.6.1.4.1.13827.14.2.82 | ScalargpsHP5071AIonPumpI | read-only | current | ASCII string showing the Cesium Ion Pump current in uA, typical range is 0 to 40 uA. It may be NOT INSTALLED if the HP5071A Cesium oscillator option is not ins… |
| 1.3.6.1.4.1.13827.14.2.83 | ScalargpsHP5071AEMultiplierV | read-only | current | ASCII string showing the Cesium Electron-Multiplier voltage, typical range is 1000 to 2553 V. It may be NOT INSTALLED if the HP5071A Cesium oscillator option i… |
| 1.3.6.1.4.1.13827.14.2.84 | ScalargpsHP5071ACsOvenV | read-only | current | ASCII string showing the Cesium Oven voltage, typical range is 0 to 10V. It may be NOT INSTALLED if the HP5071A Cesium oscillator option is not installed. |
| 1.3.6.1.4.1.13827.14.2.85 | ScalargpsHP5071ASignalGainPerCent | read-only | current | ASCII string showing the Cesium Signal Gain in percent of maximum, typical range is 14.4 to 58 %. It may be NOT INSTALLED if the HP5071A Cesium oscillator opti… |
| 1.3.6.1.4.1.13827.14.2.86 | ScalargpsHP5071ARFAmplitude1PerCent | read-only | current | ASCII string showing the Cesium microwave RF Amplitude 1 in percent of maximum, typical range is 0 to 100 %. It may be NOT INSTALLED if the HP5071A Cesium osci… |
| 1.3.6.1.4.1.13827.14.2.87 | ScalargpsHP5071ARFAmplitude2PerCent | read-only | current | ASCII string showing the Cesium microwave RF Amplitude 2 in percent of maximum, typical range is 0 to 100 %. It may be NOT INSTALLED if the HP5071A Cesium osci… |
| 1.3.6.1.4.1.13827.14.2.88 | ScalargpsHP5071AOscillatorOvenV | read-only | current | ASCII string showing the Reference Oscillator Oven voltage, typical range is -5 to -10 V. It may be NOT INSTALLED if the HP5071A Cesium oscillator option is no… |
| 1.3.6.1.4.1.13827.14.2.89 | ScalargpsHP5071AOscillatorControlPerCent | read-only | current | ASCII string showing the Reference Oscillator Control in percent of maximum, typical range is -95 to +95 %. It may be NOT INSTALLED if the HP5071A Cesium oscil… |
| 1.3.6.1.4.1.13827.14.3 | NodegCPUIO | |||
| 1.3.6.1.4.1.13827.14.3.1 | Scalargsysio1PPSWidth | read-only | current | ASCII string showing the status of the Settable PulseWidth, 1PPS Output, system-wide I/O signal. It may be NOT INSTALLED, or a string showing the current pulse… |
| 1.3.6.1.4.1.13827.14.3.2 | ScalargsysioTimeCodeFormat | read-only | current | ASCII string showing the status of the Selectable Format, Time Code Output, system-wide I/O signal. It may be NOT INSTALLED, or a string showing the current ti… |
| 1.3.6.1.4.1.13827.14.3.3 | ScalargsysioSynthesizerHz | read-only | current | Integer showing the current frequency setting of the 1 Hz resolution, Direct Digital Synthesizer (DDS) Output, system-wide I/O signal. If this option is not in… |
| 1.3.6.1.4.1.13827.14.3.4 | ScalargsysioSerialTimeOutputBaudrate | read-only | current | ASCII string showing the Baudrate of the Serial Time Output, system-wide I/O signal. It may be NOT INSTALLED, or a string showing one of 4800, 9600, 19200 or 5… |
| 1.3.6.1.4.1.13827.14.3.5 | ScalargsysioSerialTimeOutputFormat | read-only | current | ASCII string showing the Format of the Serial Time Output, system-wide I/O signal. It may be NOT INSTALLED, or a string showing one of SYSPLEX, TRUETIME, NENA0… |
| 1.3.6.1.4.1.13827.14.3.6 | ScalargsysioSerialTimeOutputParity | read-only | current | ASCII string showing the Parity of the Serial Time Output, system-wide I/O signal. It may be NOT INSTALLED, or a string showing one of ODD, EVEN or NONE. |
| 1.3.6.1.4.1.13827.14.3.7 | ScalargsysioSerialTimeNMEASentence1 | read-only | current | ASCII string showing the first NMEA sentence selected for output from the Serial Time Output, system-wide I/O signal. This sentence is only output from the Mer… |
| 1.3.6.1.4.1.13827.14.3.8 | ScalargsysioSerialTimeNMEASentence2 | read-only | current | ASCII string showing the second NMEA sentence selected for output from the Serial Time Output, system-wide I/O signal. This sentence is only output from the Me… |
| 1.3.6.1.4.1.13827.14.3.9 | ScalargsysioSerialTimeNMEASentence3 | read-only | current | ASCII string showing the third NMEA sentence selected for output from the Serial Time Output, system-wide I/O signal. This sentence is only output from the Mer… |
| 1.3.6.1.4.1.13827.14.3.10 | ScalargcpuioConnA | read-only | current | ASCII string showing the status of the CPU I/O Connector A. It may be NOT INSTALLED, or a string showing the current I/O selection. |
| 1.3.6.1.4.1.13827.14.3.11 | ScalargcpuioConnB | read-only | current | ASCII string showing the status of the CPU I/O Connector B. It may be NOT INSTALLED, or a string showing the current I/O selection. |
| 1.3.6.1.4.1.13827.14.3.12 | ScalargcpuioConnC | read-only | current | ASCII string showing the status of the CPU I/O Connector C. It may be NOT INSTALLED, or a string showing the current I/O selection. |
| 1.3.6.1.4.1.13827.14.4 | NodegPlugInOptions | |||
| 1.3.6.1.4.1.13827.14.4.1 | NodegoptSlot1 | |||
| 1.3.6.1.4.1.13827.14.4.1.1 | ScalargoptSlot1Desc | read-only | current | ASCII string that describes the Plug-In Option that is installed in this slot, or NOT INSTALLED if no Plug-In is detected. It includes the part number and seri… |
| 1.3.6.1.4.1.13827.14.4.1.2 | ScalargoptSlot1A | read-only | current | ASCII string that describes the current setting for BNC I/O Port A on the Plug-In Option in this slot. |
| 1.3.6.1.4.1.13827.14.4.1.3 | ScalargoptSlot1B | read-only | current | ASCII string that describes the current setting for BNC I/O Port B on the Plug-In Option in this slot. |
| 1.3.6.1.4.1.13827.14.4.1.4 | ScalargoptSlot1C | read-only | current | ASCII string that describes the current setting for BNC I/O Port C on the Plug-In Option in this slot. |
| 1.3.6.1.4.1.13827.14.4.1.5 | ScalargoptSlot1D | read-only | current | ASCII string that describes the current setting for BNC I/O Port D on the Plug-In Option in this slot. |
| 1.3.6.1.4.1.13827.14.4.1.6 | ScalargoptSlot1E | read-only | current | ASCII string that describes the current setting for BNC I/O Port E on the Plug-In Option in this slot. |
| 1.3.6.1.4.1.13827.14.4.1.7 | ScalargoptSlot1F | read-only | current | ASCII string that describes the current setting for BNC I/O Port F on the Plug-In Option in this slot. |
| 1.3.6.1.4.1.13827.14.4.2 | NodegoptSlot2 | |||
| 1.3.6.1.4.1.13827.14.4.2.1 | ScalargoptSlot2Desc | read-only | current | ASCII string that describes the Plug-In Option that is installed in this slot, or NOT INSTALLED if no Plug-In is detected. It includes the part number and seri… |
| 1.3.6.1.4.1.13827.14.4.2.2 | ScalargoptSlot2A | read-only | current | ASCII string that describes the current setting for BNC I/O Port A on the Plug-In Option in this slot. |
| 1.3.6.1.4.1.13827.14.4.2.3 | ScalargoptSlot2B | read-only | current | ASCII string that describes the current setting for BNC I/O Port B on the Plug-In Option in this slot. |
| 1.3.6.1.4.1.13827.14.4.2.4 | ScalargoptSlot2C | read-only | current | ASCII string that describes the current setting for BNC I/O Port C on the Plug-In Option in this slot. |
| 1.3.6.1.4.1.13827.14.4.2.5 | ScalargoptSlot2D | read-only | current | ASCII string that describes the current setting for BNC I/O Port D on the Plug-In Option in this slot. |
| 1.3.6.1.4.1.13827.14.4.2.6 | ScalargoptSlot2E | read-only | current | ASCII string that describes the current setting for BNC I/O Port E on the Plug-In Option in this slot. |
| 1.3.6.1.4.1.13827.14.4.2.7 | ScalargoptSlot2F | read-only | current | ASCII string that describes the current setting for BNC I/O Port F on the Plug-In Option in this slot. |
| 1.3.6.1.4.1.13827.14.4.3 | NodegoptSlot3 | |||
| 1.3.6.1.4.1.13827.14.4.3.1 | ScalargoptSlot3Desc | read-only | current | ASCII string that describes the Plug-In Option that is installed in this slot, or NOT INSTALLED if no Plug-In is detected. It includes the part number and seri… |
| 1.3.6.1.4.1.13827.14.4.3.2 | ScalargoptSlot3A | read-only | current | ASCII string that describes the current setting for BNC I/O Port A on the Plug-In Option in this slot. |
| 1.3.6.1.4.1.13827.14.4.3.3 | ScalargoptSlot3B | read-only | current | ASCII string that describes the current setting for BNC I/O Port B on the Plug-In Option in this slot. |
| 1.3.6.1.4.1.13827.14.4.3.4 | ScalargoptSlot3C | read-only | current | ASCII string that describes the current setting for BNC I/O Port C on the Plug-In Option in this slot. |
| 1.3.6.1.4.1.13827.14.4.3.5 | ScalargoptSlot3D | read-only | current | ASCII string that describes the current setting for BNC I/O Port D on the Plug-In Option in this slot. |
| 1.3.6.1.4.1.13827.14.4.3.6 | ScalargoptSlot3E | read-only | current | ASCII string that describes the current setting for BNC I/O Port E on the Plug-In Option in this slot. |
| 1.3.6.1.4.1.13827.14.4.3.7 | ScalargoptSlot3F | read-only | current | ASCII string that describes the current setting for BNC I/O Port F on the Plug-In Option in this slot. |
| 1.3.6.1.4.1.13827.14.4.4 | NodegoptSlot4 | |||
| 1.3.6.1.4.1.13827.14.4.4.1 | ScalargoptSlot4Desc | read-only | current | ASCII string that describes the Plug-In Option that is installed in this slot, or NOT INSTALLED if no Plug-In is detected. It includes the part number and seri… |
| 1.3.6.1.4.1.13827.14.4.4.2 | ScalargoptSlot4A | read-only | current | ASCII string that describes the current setting for BNC I/O Port A on the Plug-In Option in this slot. |
| 1.3.6.1.4.1.13827.14.4.4.3 | ScalargoptSlot4B | read-only | current | ASCII string that describes the current setting for BNC I/O Port C on the Plug-In Option in this slot. |
| 1.3.6.1.4.1.13827.14.4.4.4 | ScalargoptSlot4C | read-only | current | ASCII string that describes the current setting for BNC I/O Port C on the Plug-In Option in this slot. |
| 1.3.6.1.4.1.13827.14.4.4.5 | ScalargoptSlot4D | read-only | current | ASCII string that describes the current setting for BNC I/O Port D on the Plug-In Option in this slot. |
| 1.3.6.1.4.1.13827.14.4.4.6 | ScalargoptSlot4E | read-only | current | ASCII string that describes the current setting for BNC I/O Port E on the Plug-In Option in this slot. |
| 1.3.6.1.4.1.13827.14.4.4.7 | ScalargoptSlot4F | read-only | current | ASCII string that describes the current setting for BNC I/O Port F on the Plug-In Option in this slot. |
| 1.3.6.1.4.1.13827.14.4.5 | NodegoptSlot5 | |||
| 1.3.6.1.4.1.13827.14.4.5.1 | ScalargoptSlot5Desc | read-only | current | ASCII string that describes the Plug-In Option that is installed in this slot, or NOT INSTALLED if no Plug-In is detected. It includes the part number and seri… |
| 1.3.6.1.4.1.13827.14.4.5.2 | ScalargoptSlot5A | read-only | current | ASCII string that describes the current setting for BNC I/O Port A on the Plug-In Option in this slot. |
| 1.3.6.1.4.1.13827.14.4.5.3 | ScalargoptSlot5B | read-only | current | ASCII string that describes the current setting for BNC I/O Port B on the Plug-In Option in this slot. |
| 1.3.6.1.4.1.13827.14.4.5.4 | ScalargoptSlot5C | read-only | current | ASCII string that describes the current setting for BNC I/O Port C on the Plug-In Option in this slot. |
| 1.3.6.1.4.1.13827.14.4.5.5 | ScalargoptSlot5D | read-only | current | ASCII string that describes the current setting for BNC I/O Port D on the Plug-In Option in this slot. |
| 1.3.6.1.4.1.13827.14.4.5.6 | ScalargoptSlot5E | read-only | current | ASCII string that describes the current setting for BNC I/O Port E on the Plug-In Option in this slot. |
| 1.3.6.1.4.1.13827.14.4.5.7 | ScalargoptSlot5F | read-only | current | ASCII string that describes the current setting for BNC I/O Port F on the Plug-In Option in this slot. |
| 1.3.6.1.4.1.13827.14.5 | Nodegptp0 | |||
| 1.3.6.1.4.1.13827.14.5.1 | Scalargptp0Version | read-only | current | This value is the Version of the Precise Time Protocol, which is 2. |
| 1.3.6.1.4.1.13827.14.5.2 | Scalargptp0SyncInterval | read-only | current | This value is the log base 2 of the PTP Sync Interval in seconds. Values range from -7 to 0, which covers the range from 1/128 to 1 second. |
| 1.3.6.1.4.1.13827.14.5.3 | Scalargptp0AnnounceInterval | read-only | current | This value is the log base 2 of the PTP Announce Interval in seconds. Values range from 0 to 4, which covers the range from 1 to 16 seconds. |
| 1.3.6.1.4.1.13827.14.5.4 | Scalargptp0Priority1 | read-only | current | This value is the PTP Priority1 parameter. It ranges from 0 to 255. |
| 1.3.6.1.4.1.13827.14.5.5 | Scalargptp0Priority2 | read-only | current | This value is the PTP Priority2 parameter. It ranges from 0 to 255. |
| 1.3.6.1.4.1.13827.14.5.6 | Scalargptp0DelayMechanism | read-only | current | This value maps to the PTP Delay Mechanism, one of E2E, P2P or disabled. |
| 1.3.6.1.4.1.13827.14.5.7 | Scalargptp0Domain | read-only | current | This value is the PTP Domain parameter. It ranges from 0 to 255. |
| 1.3.6.1.4.1.13827.14.5.8 | Scalargptp0TimeMode | read-only | current | This value maps to the PTP Time Mode, one of UTC or PTP. |
| 1.3.6.1.4.1.13827.14.5.9 | Scalargptp0TTL | read-only | current | This value is the PTP multicast Time-To-Live parameter. It ranges from 1 to 255. |
| 1.3.6.1.4.1.13827.14.5.10 | Scalargptp0ClockClass | read-only | current | This value maps to the PTP Clock Class, one of Locked, Holdover or Unlocked on either the PTP or arbitrary, i.e. UTC time scale. |
| 1.3.6.1.4.1.13827.14.5.11 | Scalargptp0TimeScale | read-only | current | This value maps to the PTP Time Scale, one of ARB or PTP. When operating in other than PTP Time Mode, this value is always ARB, arbitrary. |
| 1.3.6.1.4.1.13827.14.5.12 | Scalargptp0PortState | read-only | current | This value maps to the PTP Port State, one of Initializing, Faulty, Disabled, Listening, PreMaster, Master, Passive, Uncalibrated or Slave. |
| 1.3.6.1.4.1.13827.14.5.13 | Scalargptp0TimeSource | read-only | current | This value maps to the PTP Time Source, one of Atom, GPS, Radio, PTP, NTP, Hand, Other or Oscillator. |
| 1.3.6.1.4.1.13827.14.5.14 | Scalargptp0UTCOffset | read-only | current | This value is the UTC offset from Atomic Time in seconds. It is currently 35 seconds. |
| 1.3.6.1.4.1.13827.14.5.15 | Scalargptp0UTCOffsetValid | read-only | current | This value maps to the validity of the UTC offset from Atomic Time in seconds. It is either False or True. |
| 1.3.6.1.4.1.13827.14.5.16 | Scalargptp0ClockAccuracy | read-only | current | This value maps to the PTP Clock Accuracy, with values ranging from 25 nanoseconds to Unknown. |
| 1.3.6.1.4.1.13827.14.5.17 | Scalargptp0Leap59 | read-only | current | This value maps to the state of the Leap 59 second indicator, which when True, indicates that a UTC leap second deletion event is imminent. It is either False … |
| 1.3.6.1.4.1.13827.14.5.18 | Scalargptp0Leap61 | read-only | current | This value maps to the state of the Leap 61 second indicator, which when True, indicates that a UTC leap second insertion event is imminent. It is either False… |
| 1.3.6.1.4.1.13827.14.5.19 | Scalargptp0TimeTraceable | read-only | current | This value maps to the state of the PTP Time Traceable indicator, which when True, indicates that the time of the PTP synchronization messages is traceable to … |
| 1.3.6.1.4.1.13827.14.5.20 | Scalargptp0FreqTraceable | read-only | current | This value maps to the state of the PTP Frequency Traceable indicator, which when True, indicates that the frequency of the PTP synchronization messages is tra… |
| 1.3.6.1.4.1.13827.14.6 | Nodegptp1 | |||
| 1.3.6.1.4.1.13827.14.6.1 | Scalargptp1Version | read-only | current | This value is the Version of the Precise Time Protocol, which is 2. |
| 1.3.6.1.4.1.13827.14.6.2 | Scalargptp1SyncInterval | read-only | current | This value is the log base 2 of the PTP Sync Interval in seconds. Values range from -7 to 0, which covers the range from 1/128 to 1 second. |
| 1.3.6.1.4.1.13827.14.6.3 | Scalargptp1AnnounceInterval | read-only | current | This value is the log base 2 of the PTP Announce Interval in seconds. Values range from 0 to 4, which covers the range from 1 to 16 seconds. |
| 1.3.6.1.4.1.13827.14.6.4 | Scalargptp1Priority1 | read-only | current | This value is the PTP Priority1 parameter. It ranges from 0 to 255. |
| 1.3.6.1.4.1.13827.14.6.5 | Scalargptp1Priority2 | read-only | current | This value is the PTP Priority2 parameter. It ranges from 0 to 255. |
| 1.3.6.1.4.1.13827.14.6.6 | Scalargptp1DelayMechanism | read-only | current | This value maps to the PTP Delay Mechanism, one of E2E, P2P or disabled. |
| 1.3.6.1.4.1.13827.14.6.7 | Scalargptp1Domain | read-only | current | This value is the PTP Domain parameter. It ranges from 0 to 255. |
| 1.3.6.1.4.1.13827.14.6.8 | Scalargptp1TimeMode | read-only | current | This value maps to the PTP Time Mode, one of UTC or PTP. |
| 1.3.6.1.4.1.13827.14.6.9 | Scalargptp1TTL | read-only | current | This value is the PTP multicast Time-To-Live parameter. It ranges from 1 to 255. |
| 1.3.6.1.4.1.13827.14.6.10 | Scalargptp1ClockClass | read-only | current | This value maps to the PTP Clock Class, one of Locked, Holdover or Unlocked on either the PTP or arbitrary, i.e. UTC time scale. |
| 1.3.6.1.4.1.13827.14.6.11 | Scalargptp1TimeScale | read-only | current | This value maps to the PTP Time Scale, one of ARB or PTP. When operating in other than PTP Time Mode, this value is always ARB, arbitrary. |
| 1.3.6.1.4.1.13827.14.6.12 | Scalargptp1PortState | read-only | current | This value maps to the PTP Port State, one of Initializing, Faulty, Disabled, Listening, PreMaster, Master, Passive, Uncalibrated or Slave. |
| 1.3.6.1.4.1.13827.14.6.13 | Scalargptp1TimeSource | read-only | current | This value maps to the PTP Time Source, one of Atom, GPS, Radio, PTP, NTP, Hand, Other or Oscillator. |
| 1.3.6.1.4.1.13827.14.6.14 | Scalargptp1UTCOffset | read-only | current | This value is the UTC offset from Atomic Time in seconds. It is currently 35 seconds. |
| 1.3.6.1.4.1.13827.14.6.15 | Scalargptp1UTCOffsetValid | read-only | current | This value maps to the validity of the UTC offset from Atomic Time in seconds. It is either False or True. |
| 1.3.6.1.4.1.13827.14.6.16 | Scalargptp1ClockAccuracy | read-only | current | This value maps to the PTP Clock Accuracy, with values ranging from 25 nanoseconds to Unknown. |
| 1.3.6.1.4.1.13827.14.6.17 | Scalargptp1Leap59 | read-only | current | This value maps to the state of the Leap 59 second indicator, which when True, indicates that a UTC leap second deletion event is imminent. It is either False … |
| 1.3.6.1.4.1.13827.14.6.18 | Scalargptp1Leap61 | read-only | current | This value maps to the state of the Leap 61 second indicator, which when True, indicates that a UTC leap second insertion event is imminent. It is either False… |
| 1.3.6.1.4.1.13827.14.6.19 | Scalargptp1TimeTraceable | read-only | current | This value maps to the state of the PTP Time Traceable indicator, which when True, indicates that the time of the PTP synchronization messages is traceable to … |
| 1.3.6.1.4.1.13827.14.6.20 | Scalargptp1FreqTraceable | read-only | current | This value maps to the state of the PTP Frequency Traceable indicator, which when True, indicates that the frequency of the PTP synchronization messages is tra… |