MICOM-ISDN-MIB
93 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.335.1.4.24 | Nodemicom-isdn | |||
| 1.3.6.1.4.1.335.1.4.24.1 | Nodeconfiguration | |||
| 1.3.6.1.4.1.335.1.4.24.1.1 | TablenvmIsdnBasicRateTable | not-accessible | mandatory | NAME = ; DESC = Table containing configuration and operational \ parameters for all physical Basic Rate interfaces \ on this managed device. (Configuration); H… |
| 1.3.6.1.4.1.335.1.4.24.1.1.1 | RownvmIsdnBasicRateEntry | not-accessible | mandatory | NAME = ; DESC = An entry in the ISDN Basic Rate Table. \ (Configuration); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.24.1.1.1.1 | ColumnnvmIsdnBasicRateLineTopology | read-write | mandatory | NAME = ; DESC = The line topology to be used for this interface. \ Note that setting nvmIsdnBasicRateIfType to isdns(75) \ does not necessarily mean a line top… |
| 1.3.6.1.4.1.335.1.4.24.1.1.1.2 | ColumnnvmIsdnBasicRateSignalMode | read-write | mandatory | NAME = ; DESC = The signaling channel operational mode for this \ interface. If dialup(1), there is a signaling channel \ on this interface and the correspondi… |
| 1.3.6.1.4.1.335.1.4.24.1.2 | TablenvmIsdnSignalingTable | not-accessible | mandatory | NAME = ; DESC = ISDN signaling table containing configuration and \ operational parameters for all ISDN signaling \ channels on this managed device. (Configura… |
| 1.3.6.1.4.1.335.1.4.24.1.2.1 | RownvmIsdnSignalingEntry | not-accessible | mandatory | NAME = ; DESC = An entry in the ISDN Signaling Table. To create a \ new entry, only nvmIsdnSignalingProtocol needs to be \ specified before nvmIsdnSignalingSta… |
| 1.3.6.1.4.1.335.1.4.24.1.2.1.1 | ColumnnvmIsdnSignalingIndex | read-only | mandatory | NAME = ; DESC = The index value which uniquely identifies an entry \ in the nvmIsdnSignalingTable. (Configuration); HELP = This managed object corresponds to t… |
| 1.3.6.1.4.1.335.1.4.24.1.2.1.2 | ColumnnvmIsdnSignalingProtocol | read-write | mandatory | NAME = ; DESC = The particular protocol type supported by the \ switch providing access to the ISDN network \ to which this signaling channel is connected. (Co… |
| 1.3.6.1.4.1.335.1.4.24.1.2.1.3 | ColumnnvmIsdnSignalingCallingAddress | read-write | mandatory | NAME = ; DESC = The ISDN Address to be assigned to this signaling \ channel. More specifically, this is the 'Calling Address \ information element' as being pa… |
| 1.3.6.1.4.1.335.1.4.24.1.2.1.4 | ColumnnvmIsdnSignalingSubAddress | read-write | mandatory | NAME = ; DESC = Supplementary information to the ISDN address assigned \ to this signaling channel. Usually, this is the \ subaddress as defined in Q.931. \ If… |
| 1.3.6.1.4.1.335.1.4.24.1.2.1.5 | ColumnnvmIsdnSignalingInfoTrapEnable | read-write | mandatory | NAME = ; DESC = Indicates whether isdnMibCallInformation traps \ should be generated for calls on this signaling \ channel. (Configuration); HELP = ; CAPABILIT… |
| 1.3.6.1.4.1.335.1.4.24.1.3 | TablemcmIsdnLapdTable | not-accessible | mandatory | NAME = ; DESC = Table containing configuration and statistics \ information for all LAPD (D channel Data Link) \ interfaces on this managed device. \ Only stat… |
| 1.3.6.1.4.1.335.1.4.24.1.3.1 | RowmcmIsdnLapdEntry | not-accessible | mandatory | NAME = ; DESC = An entry in the LAPD Table. (Extensions to LAPD \ table in RFC2127 MIB.) (Operational); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.24.1.3.1.1 | ColumnmcmIsdnLapdTxwinsiz | read-only | mandatory | NAME = ; DESC = The value of this object specifies the transmit \ window size (maximum number of outstanding \ unacknowledged information frames. (Operational)… |
| 1.3.6.1.4.1.335.1.4.24.1.3.1.2 | ColumnmcmIsdnLapdRxwinsiz | read-only | mandatory | NAME = ; DESC = The value of this object specifies the receive \ window size (maximum number of outstanding \ unacknowledged information frames. (Operational);… |
| 1.3.6.1.4.1.335.1.4.24.1.3.1.3 | ColumnmcmIsdnLapdTxfrmsiz | read-only | mandatory | NAME = ; DESC = The value of this object specifies the maximum \ transmit frame size (in bytes). (Operational); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.24.1.3.1.4 | ColumnmcmIsdnLapdRxfrmsiz | read-only | mandatory | NAME = ; DESC = The value of this object specifies the maximum \ receive frame size (in bytes). (Operational); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.24.1.3.1.5 | ColumnmcmIsdnLapdTimert200 | read-only | mandatory | NAME = ; DESC = The value of this object specifies the timer \ T200 value (in milliseconds). T200 is the time \ to wait for an acknowledgment to a frame \ befo… |
| 1.3.6.1.4.1.335.1.4.24.1.3.1.6 | ColumnmcmIsdnLapdTimert201 | read-only | mandatory | NAME = ; DESC = The value of this object specifies the timer \ T201 value (in milliseconds). T201 is the minimum \ time between the transmission of the TEI ide… |
| 1.3.6.1.4.1.335.1.4.24.1.3.1.7 | ColumnmcmIsdnLapdTimert202 | read-only | mandatory | NAME = ; DESC = The value of this object specifies the timer \ T202 value (in milliseconds). T201 is the minimum \ time between the transmission of the TEI ide… |
| 1.3.6.1.4.1.335.1.4.24.1.3.1.8 | ColumnmcmIsdnLapdTimert203 | read-only | mandatory | NAME = ; DESC = The value of this object specifies the timer \ T203 value (in milliseconds). T203 is the maximum \ time allowed without frames being exchanged.… |
| 1.3.6.1.4.1.335.1.4.24.1.3.1.9 | ColumnmcmIsdnLapdTimertm20 | read-only | mandatory | NAME = ; DESC = The value of this object specifies the timer \ TM20 value (in milliseconds) for TEI management. \ (Operational); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.24.1.3.1.10 | ColumnmcmIsdnLapdn200 | read-only | mandatory | NAME = ; DESC = The value of this object specifies the Retry \ Counter N200. This is the maximum number \ of retransmissions of a frame. (Operational); HELP = … |
| 1.3.6.1.4.1.335.1.4.24.1.3.1.11 | ColumnmcmIsdnLapdn202 | read-only | mandatory | NAME = ; DESC = The value of this object specifies the Retry \ Counter N202. This is the maximum number \ of transmissions of a TEI identity request \ message.… |
| 1.3.6.1.4.1.335.1.4.24.1.3.1.12 | ColumnmcmIsdnLapdnm20 | read-only | mandatory | NAME = ; DESC = The value of this object specifies the Retry \ Counter NM20 (for TEI management). \ (Operational); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.24.1.4 | TablenvmIsdnLapdTable | not-accessible | mandatory | NAME = ; DESC = Table containing configuration and statistics \ information for all LAPD (D channel Data Link) \ interfaces on this managed device. \ Only stat… |
| 1.3.6.1.4.1.335.1.4.24.1.4.1 | RownvmIsdnLapdEntry | not-accessible | mandatory | NAME = ; DESC = An entry in the LAPD Table. (Extensions to LAPD \ table in RFC2127 MIB.) (Configuration); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.24.1.4.1.1 | ColumnnvmIsdnLapdTxwinsiz | read-write | mandatory | NAME = ; DESC = The value of this object specifies the transmit \ window size (maximum number of outstanding \ unacknowledged information frames. (Configuratio… |
| 1.3.6.1.4.1.335.1.4.24.1.4.1.2 | ColumnnvmIsdnLapdRxwinsiz | read-write | mandatory | NAME = ; DESC = The value of this object specifies the receive \ window size (maximum number of outstanding \ unacknowledged information frames. (Configuration… |
| 1.3.6.1.4.1.335.1.4.24.1.4.1.3 | ColumnnvmIsdnLapdTxfrmsiz | read-write | mandatory | NAME = ; DESC = The value of this object specifies the maximum \ transmit frame size (in bytes). (Configuration); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.24.1.4.1.4 | ColumnnvmIsdnLapdRxfrmsiz | read-write | mandatory | NAME = ; DESC = The value of this object specifies the maximum \ receive frame size (in bytes). (Configuration); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.24.1.4.1.5 | ColumnnvmIsdnLapdTimert200 | read-write | mandatory | NAME = ; DESC = The value of this object specifies the timer \ T200 value (in milliseconds). T200 is the time \ to wait for an acknowledgment to a frame \ befo… |
| 1.3.6.1.4.1.335.1.4.24.1.4.1.6 | ColumnnvmIsdnLapdTimert201 | read-write | mandatory | NAME = ; DESC = The value of this object specifies the timer \ T201 value (in milliseconds). T201 is the minimum \ time between the transmission of the TEI ide… |
| 1.3.6.1.4.1.335.1.4.24.1.4.1.7 | ColumnnvmIsdnLapdTimert202 | read-write | mandatory | NAME = ; DESC = The value of this object specifies the timer \ T202 value (in milliseconds). T201 is the minimum \ time between the transmission of the TEI ide… |
| 1.3.6.1.4.1.335.1.4.24.1.4.1.8 | ColumnnvmIsdnLapdTimert203 | read-write | mandatory | NAME = ; DESC = The value of this object specifies the timer \ T203 value (in milliseconds). T203 is the maximum \ time allowed without frames being exchanged.… |
| 1.3.6.1.4.1.335.1.4.24.1.4.1.9 | ColumnnvmIsdnLapdTimertm20 | read-write | mandatory | NAME = ; DESC = The value of this object specifies the timer \ TM20 value (in milliseconds) for TEI management. \ (Configuration); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.24.1.4.1.10 | ColumnnvmIsdnLapdn200 | read-write | mandatory | NAME = ; DESC = The value of this object specifies the Retry \ Counter N200. This is the maximum number \ of retransmissions of a frame. (Configuration); HELP … |
| 1.3.6.1.4.1.335.1.4.24.1.4.1.11 | ColumnnvmIsdnLapdn202 | read-write | mandatory | NAME = ; DESC = The value of this object specifies the Retry \ Counter N202. This is the maximum number \ of transmissions of a TEI identity request \ message.… |
| 1.3.6.1.4.1.335.1.4.24.1.4.1.12 | ColumnnvmIsdnLapdnm20 | read-write | mandatory | NAME = ; DESC = The value of this object specifies the Retry \ Counter NM20 (for TEI management). \ (Configuration); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.24.1.5 | TablenvmIsdnEndpointTable | not-accessible | mandatory | NAME = ; DESC = Table containing configuration for Terminal \ Endpoints. (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ; |
| 1.3.6.1.4.1.335.1.4.24.1.5.1 | RownvmIsdnEndpointEntry | not-accessible | mandatory | NAME = ; DESC = An entry in the Terminal Endpoint Table. The value \ of nvmIsdnEndpointIfType must be supplied for a row \ in this table to become active. (Con… |
| 1.3.6.1.4.1.335.1.4.24.1.5.1.1 | ColumnnvmIsdnEndpointIndex | read-only | mandatory | NAME = ; DESC = The index value which uniquely identifies an entry \ in the nvmIsdnEndpointTable. (Configuration); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.24.1.5.1.2 | ColumnnvmIsdnEndpointTeiType | read-write | mandatory | NAME = ; DESC = The type of TEI (Terminal Endpoint Identifier) \ used for this Terminal Endpoint. In case of dynamic(1), \ the TEI value is selected by the swi… |
| 1.3.6.1.4.1.335.1.4.24.1.5.1.3 | ColumnnvmIsdnEndpointTeiValue | read-write | mandatory | NAME = ; DESC = The TEI (Terminal Endpoint Identifier) value \ for this Terminal Endpoint. If nvmIsdnEndpointTeiType \ is set to static(2), valid numbers are 0… |
| 1.3.6.1.4.1.335.1.4.24.1.5.1.4 | ColumnnvmIsdnEndpointSpid | read-write | mandatory | NAME = ; DESC = The Service profile IDentifier (SPID) information \ for this Terminal Endpoint. \ The SPID is composed of 9-20 numeric characters. \ This infor… |
| 1.3.6.1.4.1.335.1.4.24.1.6 | TablenvmIsdnDirectoryTable | not-accessible | mandatory | NAME = ; DESC = Table containing Directory Numbers. (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ; |
| 1.3.6.1.4.1.335.1.4.24.1.6.1 | RownvmIsdnDirectoryEntry | not-accessible | mandatory | NAME = ; DESC = An entry in the Directory Number Table. All objects \ in an entry must be set for a new row to become active. \ (Configuration); HELP = ; CAPAB… |
| 1.3.6.1.4.1.335.1.4.24.1.6.1.1 | ColumnnvmIsdnDirectoryIndex | read-only | mandatory | NAME = ; DESC = The index value which uniquely identifies an entry \ in the nvmIsdnDirectoryTable. (Configuration); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.24.1.6.1.2 | ColumnnvmIsdnDirectoryNumber | read-write | mandatory | NAME = ; DESC = A Directory Number. Directory Numbers are used \ to identify incoming calls on the signaling \ channel given in nvmIsdnDirectorySigIndex. \ The… |
| 1.3.6.1.4.1.335.1.4.24.1.6.1.3 | ColumnnvmIsdnDirectorySigIndex | read-write | mandatory | NAME = ; DESC = An index pointing to an ISDN signaling channel. \ Incoming calls are accepted on this \ signaling channel if the nvmIsdnDirectoryNumber is \ pr… |
| 1.3.6.1.4.1.335.1.4.24.1.6.1.4 | ColumnnvmIsdnDirectoryStatus | read-write | mandatory | NAME = ; DESC = For software releases prior to 3.0 \ this object only supported enumerations of \ add and delete with an access of write-only. \ This object is… |
| 1.3.6.1.4.1.335.1.4.24.1.7 | NodenvmDialCtlConfiguration | |||
| 1.3.6.1.4.1.335.1.4.24.1.7.1 | ScalarnvmDialCtlAcceptMode | read-write | mandatory | NAME = ; DESC = The security level for acceptance of incoming calls. \ acceptNone(1) - incoming calls will not be accepted. \ acceptAll(2) - incoming calls wil… |
| 1.3.6.1.4.1.335.1.4.24.1.7.2 | ScalarnvmDialCtlTrapEnable | read-write | mandatory | NAME = ; DESC = This object indicates whether nvmDialCtlPeerCallInformation \ and nvmDialCtlPeerCallSetup traps should be generated for \ all peers. If the val… |
| 1.3.6.1.4.1.335.1.4.24.1.8 | TablemcmDialCtlPeerCfgTable | not-accessible | mandatory | NAME = ; DESC = The list of peers from which the managed device \ will accept calls or to which it will place them. \ This table is an extension to the Peer Gr… |
| 1.3.6.1.4.1.335.1.4.24.1.8.1 | RowmcmDialCtlPeerCfgEntry | not-accessible | mandatory | NAME = ; DESC = An entry in the Peer Group Table. (Extension to \ Peer Group table in RFC2128 MIB. (Operational);\ HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.24.1.8.1.1 | ColumnmcmDialCtlPeerCfgId | read-only | mandatory | NAME = ; DESC = This object identifies a single peer. There may \ be several entries in this table for one peer, \ defining different ways of reaching this pee… |
| 1.3.6.1.4.1.335.1.4.24.1.8.1.2 | ColumnmcmDialCtlPeerCfgBchannel | read-only | mandatory | NAME = ; DESC = The value of this object specifies the B channel to be used \ for leased lines. (Operational); HELP = Note: 0 = 'any'. This managed object is n… |
| 1.3.6.1.4.1.335.1.4.24.1.9 | TablenvmDialCtlPeerCfgTable | not-accessible | mandatory | NAME = ; DESC = The list of peers from which the managed device \ will accept calls or to which it will place them. \ (Configuration); HELP = ; CAPABILITIES = … |
| 1.3.6.1.4.1.335.1.4.24.1.9.1 | RownvmDialCtlPeerCfgEntry | not-accessible | mandatory | NAME = ; DESC = Configuration data for a single Peer. This entry is \ effectively permanent, and contains information \ to identify the peer, how to connect to… |
| 1.3.6.1.4.1.335.1.4.24.1.9.1.1 | ColumnnvmDialCtlPeerCfgId | read-only | mandatory | NAME = ; DESC = This object identifies a single peer. There may \ be several entries in this table for one peer, \ defining different ways of reaching this pee… |
| 1.3.6.1.4.1.335.1.4.24.1.9.1.2 | ColumnnvmDialCtlPeerCfgBchannel | read-write | mandatory | NAME = ; DESC = The value of this object specifies the B channel to be used \ for leased lines. (Configuration); HELP = Note: 0 = 'any'. This managed object is… |
| 1.3.6.1.4.1.335.1.4.24.1.9.1.3 | ColumnnvmDialCtlPeerCfgLowerIf | read-write | mandatory | NAME = ; DESC = ifIndex value of an interface the peer will have to be \ called on. For example, on an ISDN interface, this can be \ the ifIndex value of a D c… |
| 1.3.6.1.4.1.335.1.4.24.1.9.1.4 | ColumnnvmDialCtlPeerCfgOriginateAddress | read-write | mandatory | NAME = ; DESC = Call Address at which the peer will be called. \ Think of this as the set of characters following 'ATDT ' \ or the 'phone number' included in a… |
| 1.3.6.1.4.1.335.1.4.24.1.9.1.5 | ColumnnvmDialCtlPeerCfgSubAddress | read-write | mandatory | NAME = ; DESC = Subaddress at which the peer will be called. \ If the subaddress is undefined for the given media or \ unused, this is a zero length string. (C… |
| 1.3.6.1.4.1.335.1.4.24.1.9.1.6 | ColumnnvmDialCtlPeerCfgClosedUserGroup | read-write | mandatory | NAME = ; DESC = Closed User Group at which the peer will be called. \ If the Closed User Group is undefined for the given media \ or unused, this is a zero len… |
| 1.3.6.1.4.1.335.1.4.24.1.9.1.7 | ColumnnvmDialCtlPeerCfgSpeed | read-write | mandatory | NAME = ; DESC = The desired information transfer speed in bits/second \ when calling this peer. \ The detailed media specific information, e.g. information \ t… |
| 1.3.6.1.4.1.335.1.4.24.1.9.1.8 | ColumnnvmDialCtlPeerCfgInfoType | read-write | mandatory | NAME = ; DESC = The Information Transfer Capability to be used when \ calling this peer. \ speech(2) refers to a non-data connection, whereas \ audio31(6) and … |
| 1.3.6.1.4.1.335.1.4.24.1.9.1.9 | ColumnnvmDialCtlPeerCfgPermission | read-write | mandatory | NAME = ; DESC = Applicable permissions. callback(4) either rejects the \ call and then calls back, or uses the 'Reverse charging' \ information element if it i… |
| 1.3.6.1.4.1.335.1.4.24.1.9.1.10 | ColumnnvmDialCtlPeerCfgCallRetries | read-write | mandatory | NAME = ; DESC = The number of calls to a non-responding address \ that may be made. A retry count of zero means \ there is no bound. The intent is to bound \ t… |
| 1.3.6.1.4.1.335.1.4.24.1.9.1.11 | ColumnnvmDialCtlPeerCfgRetryDelay | read-write | mandatory | NAME = ; DESC = The time in seconds between call retries if a peer \ cannot be reached. \ A value of zero means that call retries may be done \ without any del… |
| 1.3.6.1.4.1.335.1.4.24.1.9.1.12 | ColumnnvmDialCtlPeerCfgFailureDelay | read-write | mandatory | NAME = ; DESC = The time in seconds after which call attempts are \ to be placed again after a peer has been noticed \ to be unreachable, i.e. after nvmDialCtl… |
| 1.3.6.1.4.1.335.1.4.24.1.9.1.13 | ColumnnvmDialCtlPeerCfgTrapEnable | read-write | mandatory | NAME = ; DESC = This object indicates whether dialCtlPeerCallInformation \ and dialCtlPeerCallSetup traps should be generated for \ this peer. (Configuration);… |
| 1.3.6.1.4.1.335.1.4.24.1.9.1.14 | ColumnnvmDialCtlPeerCfgStatus | read-write | mandatory | NAME = ; DESC = For software releases prior to 3.0 \ this object only supported enumerations of \ add and delete with an access of write-only. \ This object is… |
| 1.3.6.1.4.1.335.1.4.24.1.10 | ScalarnvmCallHistoryTableMaxLength | read-write | mandatory | NAME = ; DESC = The upper limit on the number of entries that the \ callHistoryTable may contain. A value of 0 \ will prevent any history from being retained. … |
| 1.3.6.1.4.1.335.1.4.24.2 | Nodecontrol | |||
| 1.3.6.1.4.1.335.1.4.24.2.1 | TablemcmIsdnSigStatsCntrTable | not-accessible | obsolete | NAME = ; DESC = This table was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to r… |
| 1.3.6.1.4.1.335.1.4.24.2.1.1 | RowmcmIsdnSigStatsCntrEntry | not-accessible | obsolete | NAME = ; DESC = This table was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to r… |
| 1.3.6.1.4.1.335.1.4.24.2.1.1.1 | ColumnmcmIsdnSigStatsCntrIndex | read-only | obsolete | NAME = ; DESC = This table was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to r… |
| 1.3.6.1.4.1.335.1.4.24.2.1.1.2 | ColumnmcmIsdnSigStatsCntrAction | write-only | obsolete | NAME = ; DESC = This table was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to r… |
| 1.3.6.1.4.1.335.1.4.24.2.2 | TablemcmIsdnLapdCntrTable | not-accessible | obsolete | NAME = ; DESC = This table was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to r… |
| 1.3.6.1.4.1.335.1.4.24.2.2.1 | RowmcmIsdnLapdCntrEntry | not-accessible | obsolete | NAME = ; DESC = This table was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to r… |
| 1.3.6.1.4.1.335.1.4.24.2.2.1.1 | ColumnmcmIsdnLapdCntrIndex | read-only | obsolete | NAME = ; DESC = This table was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to r… |
| 1.3.6.1.4.1.335.1.4.24.2.2.1.2 | ColumnmcmIsdnLapdCntrAction | write-only | obsolete | NAME = ; DESC = This table was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to r… |
| 1.3.6.1.4.1.335.1.4.24.2.3 | TablemcmDialCtlPeerStatsGaugeTable | not-accessible | obsolete | NAME = ; DESC = This table was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to r… |
| 1.3.6.1.4.1.335.1.4.24.2.3.1 | RowmcmDialCtlPeerStatsGaugeEntry | not-accessible | obsolete | NAME = ; DESC = This table was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to r… |
| 1.3.6.1.4.1.335.1.4.24.2.3.1.1 | ColumnmcmDialCtlPeerStatsGaugeAction | write-only | obsolete | NAME = ; DESC = This table was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to r… |
| 1.3.6.1.4.1.335.1.4.24.2.4 | TablemcmCallActiveGaugeTable | not-accessible | obsolete | NAME = ; DESC = This table was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to r… |
| 1.3.6.1.4.1.335.1.4.24.2.4.1 | RowmcmCallActiveGaugeEntry | not-accessible | obsolete | NAME = ; DESC = This table was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to r… |
| 1.3.6.1.4.1.335.1.4.24.2.4.1.1 | ColumnmcmCallActiveGaugeAction | write-only | obsolete | NAME = ; DESC = This table was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to r… |
| 1.3.6.1.4.1.335.1.4.24.2.5 | ScalarmcmCallHistoryTableResetCmd | write-only | obsolete | NAME = ; DESC = This table was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to r… |