MICOM-SYS-MIB
155 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.335.1.4.1 | Nodemicom-system | |||
| 1.3.6.1.4.1.335.1.4.1.1 | NodemcmSysMainPowerSupplyFailure | NAME = ; DESC = System TRAP message: indication of Power Supply \ failure.\ Severity Level: CRITICAL.; HELP = Power Supply Jumper may not be set properly.\ Ple… | ||
| 1.3.6.1.4.1.335.1.4.1.1 | Nodesys-configuration | |||
| 1.3.6.1.4.1.335.1.4.1.1.1 | NodemcmSysHWTypeGroup | |||
| 1.3.6.1.4.1.335.1.4.1.1.1.1 | ScalarmcmSysHWTypeModelType | read-only | deprecated | NAME = ; DESC = **NOTE: THIS OBJECT HAS BEEN \ DEPRECATED. Its functionality \ has been replaced by the \ mcmSysHWTypeCPUType object \ located below in this gr… |
| 1.3.6.1.4.1.335.1.4.1.1.1.2 | ScalarmcmSysHWTypeRevisionLevel | read-only | mandatory | NAME = ; DESC = The revision level of the \ access device.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.1.3 | ScalarmcmSysHWTypeManufRevDate | read-only | mandatory | NAME = ; DESC = The manufacture/revision date \ of the access device .; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.1.4 | ScalarmcmSysHWTypeSerialNumber | read-only | mandatory | NAME = ; DESC = The serial number of \ the access device..; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.1.5 | ScalarmcmSysHWTypeModuleID | read-only | mandatory | NAME = ; DESC = The module ID of the access \ device.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.1.6 | ScalarmcmSysHWTypeMACAddress | read-only | mandatory | NAME = ; DESC = The base MAC address assigned \ to the access device.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.1.7 | ScalarmcmSysHWTypeCPUType | read-only | mandatory | NAME = ; DESC = Indicates the CPU type for this \ access device; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.1.8 | ScalarmcmSysHWTypeGenCfgType | read-only | mandatory | NAME = ; DESC = Indicates the model type for this \ access device.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.2 | NodemcmSysCfgGroup | |||
| 1.3.6.1.4.1.335.1.4.1.1.2.1 | ScalarmcmSysCfgCPUConfiguration | read-only | mandatory | NAME = ; DESC = The CPU configuration for this access device.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.2.2 | ScalarmcmSysCfgPrimaryWANPort | read-only | mandatory | NAME = ; DESC = Indicates the presence of the \ Primary WAN port.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.2.3 | ScalarmcmSysCfgPrimaryWANPortPhyMedia | read-only | mandatory | NAME = ; DESC = Indicates the physical media of Primary WAN port.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.2.4 | ScalarmcmSysCfgDCESerialPortPhyMedia | read-only | mandatory | NAME = ; DESC = Indicates the detected DCE \ serial port on the access \ device.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.2.5 | ScalarmcmSysCfgQUICCExpansionModule1 | read-only | mandatory | NAME = ; DESC = QUICC Expansion module detected.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.2.6 | ScalarmcmSysCfgQUICCExpansionModule2 | read-only | mandatory | NAME = ; DESC = QUICC Expansion module-2 is detected.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.2.7 | ScalarmcmSysCfgFeatureRTCBatteryStatus | read-only | mandatory | NAME = ; DESC = TimeOfDay/SRAM module detected.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.2.8 | ScalarmcmSysCfgDRAMSize | read-only | mandatory | NAME = ; DESC = Total installed DRAM memory size in megabytes.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.2.9 | ScalarmcmSysCfgFlashMemorySize | read-only | mandatory | NAME = ; DESC = Total installed Flash memory size in megabytes.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.3 | TablemcmSysLimTable | not-accessible | mandatory | NAME = ; DESC = Table to view an individual Logical \ Interface Modules(LIM) on the access \ device.; HELP = Table to view the hardware \ CAPABILITIES = NET_CF… |
| 1.3.6.1.4.1.335.1.4.1.1.3.1 | RowmcmSysLimEntry | not-accessible | mandatory | NAME = ; DESC = Entry pertaining to a specific logical module.; HELP = This includes the Name, Part number, and rev. level.; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.3.1.1 | ColumnmcmSysLimModuleAddress | read-only | mandatory | NAME = ; DESC = lim (logical interface module) identifies \ the address of the module within the unit; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.3.1.2 | ColumnmcmSysLimModuleName | read-only | mandatory | NAME = ; DESC = Displays the name of the module \ in the specific location; NOTE : this object was previously named \ mcmSysCardModuleName.; HELP = ; CAPABILIT… |
| 1.3.6.1.4.1.335.1.4.1.1.3.1.3 | ColumnmcmSysLimPcbPartNumber | read-only | mandatory | NAME = ; DESC = Displays the part number of the module in \ the specific location; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.3.1.4 | ColumnmcmSysLimPcbRelease | read-only | mandatory | NAME = ; DESC = Displays the release level of the module in \ the specific location.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.3.1.5 | ColumnmcmSysLimSerialNumber | read-only | mandatory | NAME = ; DESC = Displays the serial number of the module in \ the specific location.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.3.1.6 | ColumnmcmSysLimMfgDate | read-only | mandatory | NAME = ; DESC = Displays the manufacturing date of the module in \ the specific location.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.4 | NodemcmSysChassisGroup | |||
| 1.3.6.1.4.1.335.1.4.1.1.4.1 | ScalarmcmSysChassisNumberOfModules | read-only | mandatory | NAME = ; DESC = Chassis style: number of modules.; NOTE : this object was previously named \ mcmSysChassisNumberOfSlots.; HELP = ; CAPABILITIES = NET_CFG, VPN_… |
| 1.3.6.1.4.1.335.1.4.1.1.4.2 | ScalarmcmSysChassisCoolingFan | read-only | mandatory | NAME = ; DESC =Chassis cooling fan status.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.4.3 | ScalarmcmSysChassisPowerSupplyType | read-only | mandatory | NAME = ; DESC = Specifies the type of power supply \ based on type of voltage; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.4.4 | ScalarmcmSysChassisPowerSupplyStatus | read-only | mandatory | NAME = ; DESC = Fault indicates that at least one \ power supply module is down; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.4.5 | ScalarmcmSysChassisPowerSupplyModuleCount | read-only | mandatory | NAME = ; DESC = Specifies the number of power \ supply modules installed; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.4.6 | ScalarmcmSysChassisPowerSupplyRedundant | read-only | mandatory | NAME = ; DESC = Indicates whether there are \ redundant power supply modules; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.5 | NodemcmSysTimeOfDayGroup | |||
| 1.3.6.1.4.1.335.1.4.1.1.5.1 | NodemcmSysTimeOfDay | |||
| 1.3.6.1.4.1.335.1.4.1.1.5.1.1 | ScalarmcmSysTimeOfDaySec | read-write | mandatory | NAME = ; DESC = System Time of day in seconds.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.5.1.2 | ScalarmcmSysTimeOfDayMin | read-write | mandatory | NAME = ; DESC = System Time of day in minutes.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.5.1.3 | ScalarmcmSysTimeOfDayHour | read-write | mandatory | NAME = ; DESC = System Time of day in hours.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.5.1.4 | ScalarmcmSysTimeOfDayDay | read-write | mandatory | NAME = ; DESC = System Time of day, the Day.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.5.1.5 | ScalarmcmSysTimeOfDayDate | read-write | mandatory | NAME = ; DESC = System Time of day. The date.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.5.1.6 | ScalarmcmSysTimeOfDayMonth | read-write | mandatory | NAME = ; DESC = System Time of day. The Month.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.5.1.7 | ScalarmcmSysTimeOfDayYear | read-write | mandatory | NAME = ; DESC = System Time of day. The Year.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.5.2 | ScalarmcmSysAsciiTimeOfDay | read-only | mandatory | NAME = ; DESC = This object will give the ascii version of \ the time of day. This would be the same time \ as reflected by all the other objects of \ this gro… |
| 1.3.6.1.4.1.335.1.4.1.1.6 | NodemcmSysFirmwareGroup | |||
| 1.3.6.1.4.1.335.1.4.1.1.6.1 | ScalarmcmSysOperationalType | read-write | mandatory | NAME = ; DESC = Network Operational mode of this \ access device.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.6.2 | ScalarmcmSysFirmwareConfigCommitBank | read-write | mandatory | NAME = ; DESC = The Default Confi. Image (global).; HELP = Committed Config. Image Bank.; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.6.3 | ScalarmcmSysFirmwareConfigSaveBank | read-write | mandatory | NAME = ; DESC = Default Software Image Bank.; HELP = Committed Code Image (global).; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.6.4 | ScalarmcmSysFirmwareConfigActiveBank | read-write | mandatory | NAME = ; DESC = The active Configuration Image Bank.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.6.5 | ScalarmcmSysFirmwareConfigReadBank | read-only | mandatory | NAME = ; DESC = The Bank that the Configuration Read from.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.6.6 | ScalarmcmSysFirmwareCodeReadBank | read-only | mandatory | NAME = ; DESC =The Bank that the Code Read from.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.6.7 | ScalarmcmSysFirmwareCodeCommitBank | read-write | mandatory | NAME = ; DESC =The Bank that the Code is committed from.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.6.8 | ScalarmcmSysFirmwareVersion | read-only | mandatory | NAME = ; DESC = The Code Version that this access \ device is running on.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.6.9 | ScalarmcmSysFirmwareConfigVersion | read-only | mandatory | NAME = ; DESC = The Configuration Version that this \ access device is running on.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.7 | TablemcmSysFirmwareImageTable | not-accessible | mandatory | NAME = ; DESC = The Firmware Image Table contains \ information about the Code Image.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.7.1 | RowmcmSysFirmwareImageEntry | not-accessible | mandatory | NAME = ; DESC = The entry that pertains to Code Image.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.7.1.1 | ColumnmcmSysFirmwareImageIndex | read-only | mandatory | NAME = ; DESC = The Index value for a specific Image.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.7.1.2 | ColumnmcmSysFirmwareImageBank | read-only | mandatory | NAME = ; DESC = The Specific ImageBank that holds the Code \ Image or Config Image.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.7.1.3 | ColumnmcmSysFirmwareImageSoftware | read-only | mandatory | NAME = ; DESC = This indicates that the specific Software \ is a boot Code, Image Code or a Config Code.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.7.1.4 | ColumnmcmSysFirmwareImageFilename | read-only | mandatory | NAME = ; DESC =This indicates the File name of the Firmware.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.7.1.5 | ColumnmcmSysFirmwareImageRevision | read-only | mandatory | NAME = ; DESC = This indicates the Revision level of the \ specific Firmware.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.7.1.6 | ColumnmcmSysFirmwareImageSize | read-only | mandatory | NAME = ; DESC = This indicates the size of the Firmware in bytes.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.7.1.7 | ColumnmcmSysFirmwareImageCommitStatus | read-only | mandatory | NAME = ; DESC = This indicates the Firmware Image Commit Status.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.7.1.8 | ColumnmcmSysFirmwareImageBurnCount | read-only | mandatory | NAME = ; DESC = This indicates the global burn count.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.8 | NodemcmSysSmartCfgGroup | |||
| 1.3.6.1.4.1.335.1.4.1.1.8.1 | ScalarmcmSysSmartCfgAction | write-only | mandatory | NAME = ; DESC = Directs system to update secondary (Flash) storage \ by saving present configuration. Or directs discard \ of present re-configures.; HELP = ; … |
| 1.3.6.1.4.1.335.1.4.1.1.8.2 | ScalarmcmSysSmartCfgStatus | read-only | mandatory | NAME = ; DESC = Indicates if system is currently being \ re-configured.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.9 | TablemcmSysCommunityStringTable | not-accessible | mandatory | NAME = ; DESC = The System Community String Table.; HELP = ; CAPABILITIES = NET_CFG, VPN_NONE; |
| 1.3.6.1.4.1.335.1.4.1.1.9.1 | RowmcmSysCommunityStringEntry | not-accessible | mandatory | NAME = ; DESC = Entry that pertains to the Community \ string.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.9.1.1 | ColumnmcmSysCommunityStringIndex | read-write | mandatory | NAME = ; DESC = The Index value for each Community Strings.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.9.1.2 | ColumnmcmSysCommunityStringCommunity | read-write | mandatory | NAME = ; DESC = Community String used as access password.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.10 | NodemcmSysValidateCommunityGroup | |||
| 1.3.6.1.4.1.335.1.4.1.1.10.1 | ScalarmcmSysValidateCommunity | write-only | mandatory | NAME = ; DESC = This parameter contains the password \ obtained by the command line user interface.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.10.2 | ScalarmcmSysLastCommunityPriviledgeLevel | read-only | mandatory | NAME = ; DESC = This parameter contains the priviledge \ level from the last valid password.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.11 | NodemcmSysConsolePortGroup | |||
| 1.3.6.1.4.1.335.1.4.1.1.11.1 | ScalarmcmSysConsolePortBaudRate | read-write | mandatory | NAME = ; DESC = Set Console (and Debugger) Speed; HELP = Set Console Speed; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.11.2 | ScalarmcmSysConsolePortStopBits | read-write | mandatory | NAME = ; DESC = Set Console number of stop bits; HELP = Set Console number of stop bits; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.11.3 | ScalarmcmSysConsolePortDataBits | read-write | mandatory | NAME = ; DESC = Set Console number of Data bits (excluding start, \ stop and parity bits); HELP = Set Console number of Data bits (excluding start, \ stop and … |
| 1.3.6.1.4.1.335.1.4.1.1.11.4 | ScalarmcmSysConsolePortParity | read-write | mandatory | NAME = ; DESC = Set Console parity bit; HELP = Set Console parity bit; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.12 | NodemcmSysCommitTrackingGroup | |||
| 1.3.6.1.4.1.335.1.4.1.1.12.1 | ScalarmcmSysCommitTrackingCounter | read-only | mandatory | NAME = ; DESC = The Counter that pertains to the Commit Tracking.; HELP = ; CAPABILITIES = NET_CFG, VPN_NONE; |
| 1.3.6.1.4.1.335.1.4.1.1.12.2 | ScalarmcmSysCommitTrackingSrcIPAddressOfLastCommit | read-only | mandatory | NAME = ; DESC = The IP address of the SNMP manager that issued \ the last successful SET operation.; HELP = ; CAPABILITIES = NET_CFG, VPN_NONE; |
| 1.3.6.1.4.1.335.1.4.1.1.12.3 | ScalarmcmSysCommitTrackingCommunityOfLastCommit | read-only | mandatory | NAME = ; DESC = The community of the last successful SET.; HELP = ; CAPABILITIES = NET_CFG, VPN_NONE; |
| 1.3.6.1.4.1.335.1.4.1.1.12.4 | ScalarmcmSysCommitTrackingTimeOfLastCommit | read-only | mandatory | NAME = ; DESC = The system uptime in ticks when the last \ SET was serviced.; HELP = ; CAPABILITIES = NET_CFG, VPN_NONE; |
| 1.3.6.1.4.1.335.1.4.1.1.13 | TablemcmSysIfExtTable | not-accessible | mandatory | NAME = ; DESC = The Interface table that contains \ information about IfExtension in this \ access device.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.13.1 | RowmcmSysIfExtEntry | not-accessible | mandatory | NAME = ; DESC = The specific Entry that pertains to \ IfExt in this access device.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.13.1.1 | ColumnmcmSysIfExtIfIndex | read-only | mandatory | NAME = ; DESC = The Index value of the specifc entry.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.13.1.2 | ColumnmcmSysIfExtName | read-only | mandatory | NAME = ; DESC = The Name of the specific IfExt entry.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.13.1.3 | ColumnmcmSysIfExtType | read-only | mandatory | NAME = ; DESC = The values of this field are kept \ the same as the values for the \ ifExtType defined in \ the extension to MIB II (RFC1573); HELP = ; CAPABIL… |
| 1.3.6.1.4.1.335.1.4.1.1.13.1.4 | ColumnmcmSysIfExtLinkUpDownTrapEnable | read-write | mandatory | NAME = ; DESC = This indicates if the LinkUpDownTrap \ is enabled or not.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.13.1.5 | ColumnmcmSysIfExtConnectorPresent | read-only | mandatory | NAME = ; DESC = This indicates if the IfExt entry \ has a phisical connector present.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.13.1.6 | ColumnmcmSysIfExtPersistenceType | read-only | mandatory | NAME = ; DESC = This indicates if the Persistence Type \ is volatile or non-volatile.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.13.1.7 | ColumnmcmSysIfExtState | read-only | mandatory | NAME = ; DESC = This indicates that if the IfExt entry \ is configured or not.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.13.1.8 | ColumnmcmSysIfExtPPA | read-only | mandatory | NAME = ; DESC = The PPA of the port; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.13.1.9 | ColumnmcmSysIfExtModule | read-only | mandatory | NAME = ; DESC = The logical interface module address \ of this interface \ NOTE : this object was previously named \ mcmSysIfExtSlot.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.13.1.10 | ColumnmcmSysIfExtChannel | read-only | mandatory | NAME = ; DESC = The channel number of this interface... \ FR DCE: N/A, WAN Driver: SCC number, \ WAN Connector: corresponding SCC number; HELP = ; CAPABILITIES… |
| 1.3.6.1.4.1.335.1.4.1.1.13.1.11 | ColumnmcmSysIfExtPPADeviceType | read-only | mandatory | NAME = ; DESC = The PPA device type of this interface.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.14 | NodemcmSysRollbackGroup | |||
| 1.3.6.1.4.1.335.1.4.1.1.14.1 | ScalarmcmSysRollbackFeature | read-write | mandatory | NAME = ; DESC = This indicates if the RollBack feature is \ enabled or disabled.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.14.2 | ScalarmcmSysRollbackStatus | read-only | mandatory | NAME = ; DESC = This indicates whether Confirm system \ Rollback is required or not. Or will \ Confirm at the next reset.; HELP = ; CAPABILITIES = NET_CFG, VPN… |
| 1.3.6.1.4.1.335.1.4.1.1.14.3 | ScalarmcmSysRollbackConfirm | write-only | mandatory | NAME = ; DESC = This confirms that previous System Configuration \ or Code bank changes are accepted and that the \ System is NOT to timeout, reset and go back… |
| 1.3.6.1.4.1.335.1.4.1.1.15 | TablenvmSysIfExtTable | not-accessible | mandatory | NAME = ; DESC = The Interface table that contains \ information about IfExtension in this \ access device.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.15.1 | RownvmSysIfExtEntry | not-accessible | mandatory | NAME = ; DESC = The specific Entry that pertains to \ IfExt in this access device.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.15.1.1 | ColumnnvmSysIfExtIfIndex | read-only | mandatory | NAME = ; DESC = The Index value of the specifc entry.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.15.1.2 | ColumnnvmSysIfExtName | read-only | mandatory | NAME = ; DESC = The Name of the specific IfExt entry.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.15.1.3 | ColumnnvmSysIfExtType | read-only | mandatory | NAME = ; DESC = The values of this field are kept \ the same as the values for the \ ifExtType defined in \ the extension to MIB II (RFC1573); HELP = ; CAPABIL… |
| 1.3.6.1.4.1.335.1.4.1.1.15.1.4 | ColumnnvmSysIfExtLinkUpDownTrapEnable | read-only | mandatory | NAME = ; DESC = This indicates if the LinkUpDownTrap \ is enabled or not.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.15.1.5 | ColumnnvmSysIfExtConnectorPresent | read-only | mandatory | NAME = ; DESC = This indicates if the IfExt entry \ has a phisical connector present.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.15.1.6 | ColumnnvmSysIfExtPersistenceType | read-only | mandatory | NAME = ; DESC = This indicates if the Persistence Type \ is volatile or non-volatile.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.15.1.7 | ColumnnvmSysIfExtState | read-only | mandatory | NAME = ; DESC = This indicates that if the IfExt entry \ is configured or not.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.15.1.8 | ColumnnvmSysIfExtPPA | read-only | mandatory | NAME = ; DESC = The PPA of the port; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.15.1.9 | ColumnnvmSysIfExtModule | read-only | mandatory | NAME = ; DESC = The logical interface module address \ of this interface \ NOTE : this object was previously named \ nvmSysIfExtSlot.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.15.1.10 | ColumnnvmSysIfExtChannel | read-only | mandatory | NAME = ; DESC = The channel number of this interface... \ FR DCE: N/A, WAN Driver: SCC number, \ WAN Connector: corresponding SCC number; HELP = ; CAPABILITIES… |
| 1.3.6.1.4.1.335.1.4.1.1.15.1.11 | ColumnnvmSysIfExtPPADeviceType | read-only | mandatory | NAME = ; DESC = The PPA device type of this interface.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.16 | TablemcmSysPhysTable | not-accessible | mandatory | NAME = ; DESC = Table to map physical cards to \ Logical Interface Modules (LIM) on \ the access device HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.1.16.1 | RowmcmSysPhysEntry | not-accessible | mandatory | NAME = ; DESC = Entry pertaining to a specific physical module.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.16.1.1 | ColumnmcmSysPhysModuleAddress | read-only | mandatory | NAME = ; DESC = The value of this object identifies \ the physical slot address of the module \ within the unit; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.1.16.1.2 | ColumnmcmSysLogModuleAddress | read-only | mandatory | NAME = ; DESC = The value of this object identifies \ the logical interface module (lim) address; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.1.2 | NodemcmSysChassisFanFailure | NAME = ; DESC = System TRAP message: indication of a chassis \ FAN failure on the access device.\ Severity Level: MINOR.; HELP = Fan is not running. Please con… | ||
| 1.3.6.1.4.1.335.1.4.1.2 | Nodesys-control | |||
| 1.3.6.1.4.1.335.1.4.1.2.1 | NodemcmSysResetGroup | |||
| 1.3.6.1.4.1.335.1.4.1.2.1.1 | ScalarmcmSysResetAction | write-only | mandatory | NAME = ; DESC = Reset Unit, restart the CPU only, warm start \ or factory default (cold start).; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.2.1.2 | ScalarmcmSysRestartReason | read-only | mandatory | NAME = ; DESC = Reset Restart Reason Codes; HELP = Reason Code for last Reset; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.2.1.3 | ScalarmcmSysTimeOfLastReset | read-only | mandatory | NAME = ; DESC = This object will indicate the time of \ when the access device was last reset. HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.2.2 | NodemcmSysCfgLockGroup | |||
| 1.3.6.1.4.1.335.1.4.1.2.2.1 | ScalarmcmSysCfgLock | read-write | mandatory | NAME = ; DESC = Indicates if system config is locked.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.3 | NodemcmSysSystemReset | NAME = ; DESC = System TRAP message: indication of system Reset \ (warm start).\ Severity Level: INFORMATIVE.; HELP = A system reset has occured. If normal \ o… | ||
| 1.3.6.1.4.1.335.1.4.1.3 | Nodesys-statistics | |||
| 1.3.6.1.4.1.335.1.4.1.3.1 | NodemcmSysUtilGroup | |||
| 1.3.6.1.4.1.335.1.4.1.3.1.1 | ScalarmcmSysCpuUtilization | read-only | mandatory | NAME = ; DESC = Indicates the CPU utilization in percent.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.3.1.2 | ScalarmcmSysLinkTransmitBandwidthUtilization | read-only | mandatory | NAME = ; DESC = Indicates the Bandwidth Utilization in percent.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.3.1.3 | ScalarmcmSysInternalRAMUtilization | read-only | mandatory | NAME = ; DESC = Indicates internal RAM Utilization in percent.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.3.1.4 | ScalarmcmSysLinkReceiveBandwidthUtilization | read-only | mandatory | NAME = ; DESC = Indicates the Link Receive Bandwidth utilization.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.4 | NodemcmSysBatteryLow | NAME = ; DESC = System TRAP message: Indication of Battery Low.\ Severity Level: MINOR.; HELP = The access device is experiencing a Battery \ Low condition. Pl… | ||
| 1.3.6.1.4.1.335.1.4.1.4 | Nodesys-trap | |||
| 1.3.6.1.4.1.335.1.4.1.4.1 | TablemcmSysTrapSubscriptionTable | not-accessible | mandatory | NAME = ; DESC = This Table displays the System Trap \ subscription information of this \ access device.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.4.1.1 | RowmcmSysTrapSubscriptionEntry | not-accessible | mandatory | NAME = ; DESC = Entry that pertains to a specific TRAP.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.4.1.1.1 | ColumnmcmSysTrapSubscriptionIPAddress | read-write | mandatory | NAME = ; DESC = IP address of the SNMP Manager subscribing Traps.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.4.1.1.2 | ColumnmcmSysTrapSubscriptionCommunityString | read-write | mandatory | NAME = ; DESC = Community string for this subscriber.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.4.1.1.3 | ColumnmcmSysTrapSubscriptionAction | read-write | mandatory | NAME = ; DESC = Action to take: add or delete subscriber.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.4.2 | NodemcmSysTrapThresholdGroup | |||
| 1.3.6.1.4.1.335.1.4.1.4.2.1 | ScalarmcmSysTrapCPUUtilThreshold | read-write | mandatory | NAME = ; DESC = Indicates the configured threshold for \ CPU Utilization.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.4.2.2 | ScalarmcmSysTrapBandwidthUtilThreshold | read-write | mandatory | NAME = ; DESC = Indicates the configured threshold for \ bandwidth utilization.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.4.2.3 | ScalarmcmSysTrapRAMUtilThreshold | read-write | mandatory | NAME = ; DESC = Indicates the configured threshold for \ RAM utilization.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; |
| 1.3.6.1.4.1.335.1.4.1.5 | NodemcmSysConfigChanged | NAME = ; DESC = An indication of configuration change in \ the access device.\ Severity Level: MAJOR.; HELP = Configuration has changed in access device. Pleas… | ||
| 1.3.6.1.4.1.335.1.4.1.6 | NodemcmSysCPUUtilExceeded | NAME = ; DESC = System TRAP message: Indication of CPU Utilization \ exceeded for configured threshold.\ Severity Level: MAJOR.; HELP = The access device has e… | ||
| 1.3.6.1.4.1.335.1.4.1.7 | NodemcmSysBandwidthUtilExceeded | NAME = ; DESC = System TRAP message: Indication of Bandwidth \ Utilization exceeded for configured threshold.\ Severity Level: MAJOR.; HELP = The access device… | ||
| 1.3.6.1.4.1.335.1.4.1.8 | NodemcmSysRAMUtilExceeded | NAME = ; DESC = System TRAP message: Indication of RAM \ Utilization exceeded for configured threshold.\ Severity Level: MAJOR.; HELP = It is an indication of … | ||
| 1.3.6.1.4.1.335.1.4.1.9 | NodemcmSysRollbackEnabled | NAME = ; DESC = System TRAP message: Indication of System \ Rollback Feature enabled.\ Severity Level: INFORMATIVE.; HELP = This is an indication of the Rollba… | ||
| 1.3.6.1.4.1.335.1.4.1.10 | NodemcmSysRollbackDisabled | NAME = ; DESC = System TRAP message: Indication of System \ Rollback Feature disabled.\ Severity Level: INFORMATIVE.; HELP = This is an indication of the Rollb… | ||
| 1.3.6.1.4.1.335.1.4.1.11 | NodemcmSysRollbackArmed | NAME = ; DESC = System TRAP message: Indication of System \ Rollback Feature armed, resulting from User \ committing/activating Code/Config Bank for \ next res… | ||
| 1.3.6.1.4.1.335.1.4.1.12 | NodemcmSysRollbackDisarmed | NAME = ; DESC = System TRAP message: Indication of System \ Rollback Feature confirmed for this session.\ Severity Level: INFORMATIVE.; HELP = This is a condit… |